Professional Documents
Culture Documents
Simba M4 C-ITH - Technical Specification
Simba M4 C-ITH - Technical Specification
Simba M4 C-ITH
Technical specification
www.atlascopco.com
M4 C-ITH
M4 C-ITH
Production drilling rig with pneumatic in the hole hammer, ITH, for
deep straight holes. The Rig Control System (RCS) provides ef-
ficient and high precision long hole drilling, and also ensures an
ergonomic working environment and longer consumable life. Ring
drilling with parallel holes upwards/downwards up to 3 m apart.
Hole diameter 95178 mm.
Standard features
Rock drill Control system
Pneumatic in the hole hammer, ITH (hammer not Rig Control System (RCS)
supplied with rig) Automation level: ABC Basic
Rotation unit DHR 48H Angle reading instrument
Rotation Pressure Controlled feed (RPCF)
Drilling unit Pre-set parameters for different drilling conditions
Hold-back pressure control
Mechnized rod handling system
Feed with hydraulic two-stage cylinder
Front- and rear-mounted stingers Carrier
Breakout table for guidance during collaring and Mine-adapted carrier with articulated steering and
as support during rod handling four-wheel drive
Low-emission, turbo-charged diesel engine
Positioning unit
Tilt, rotation, pendulum arm and slide table General
Accurate, smooth and proportional movements Trolley-mounted operator panel
Mine-adapted, sturdy components FOPS-approved protective roof
Electrical cable reel
Working lights on tripods and protective roof
Simba M4 C-ITH
Specifications
ROTATION UNIT Electrical system
DHR 48H56 DHR 48H68
Total installed power......................................................63 kW
Main motors...................................................................55 kW
Length with fixed adapter 534 mm 534 mm Voltage....................................................................400690 V
Length with floating adapter 888 mm 888 mm Frequency. ................................................................5060 Hz
Torque, max. 3,900 Nm 5,100 Nm
Starting method.................................... star/delta (400690 V)
Electronic overload protection for electric motors
Rotation speed 0107 rpm 068 rpm
Digital volt/amperage meter in electric cabinet
Adapter floating API 3 Reg Box API 3 Reg Box Phase sequence indicator
Weight 164 kg 164 kg Earth fault indicator
Battery charger
Transformer. ...................................................................8 kVA
FEED
Halogen working lights, mounted on roof.............. 2x1,000 W
BMH 200-series BMH 235 BMH 236 Cable reel
Specifications
DRILL STEEL
Rock drill Hole diameter, mm Drill pipes Thread pin/box
Optional equipment
Drilling system Plug PC5
Socket PC4
Floating sub
Socket PC5
Switch gear
Positioning system Electrical outlet, 16 A
Rig alignment laser RAL 650 Extra transformer, 15 kVA
Turntable (20) between boom frame and drilling unit Extra transformer, 10 kVA
Additional stinger forward on feed, BSJ 8-115 Metal halogen working lights, 2 x 400 W
(stroke length 1,150 mm) Extra working lights 2 x 200 W, 24 V (on tripod)
Additional stinger backward on feed, BSJ 8-200 Extra working lights 2 x 500 W, 230 V (on tripod)
(stroke length 2,000 mm) Electrics according to local standards
Automatic lubrication for positioning system
Central lubrication for positioning system Cabin
Thread lubrication kit FOPS-approved cabin:
Rod handling system RHS 35 (up to 65 m) -- Fixed seat
-- CD-changer
Automation -- Boot washing kit
Simba ABC Regular -- Air conditioning unit without heating
Simba ABC Total Stainless steel cabin
Drill Plan Handling Air conditioner with heating
Full Drill Data Handling Front window, 24 mm
Rig Remote Access Swingable operator seat
Breakthrough Automatic Stop FOPS-approved grizzly bar for front window
Text Message System Cabin lift/tilt system, 375 mm/15
Remote Cradle Control/Remote Feed Control Reversing camera with monitor
Mine Navigation Joystick controlled spotlight
Void Detection
Carrier
Air system Fire suppression system, manual
Fire suppression system, automatic (check-fire)
On-board booster compressor Fire suppression system, full automatic
Particle filter UNIKAT
Hydraulic system Brake lights
L-carrier
Air-oil cooler Solid tyres
Heater kit for diesel engine, electric motor and hydraulic Deutz TCD 2013 L06 2V, 175 kW (238 hp)
oil tank
Miscellaneous
Electrical system
Manual rig washing kit
Soft start for 400700 V Manual lubrication kit
Electrical cable on reel, H07RN-F Hose and cable guide at water/cable reel
Electrical cable on reel, Buflex Link-one parts book
Plug PC4 Remote operating kit
Special paint
Additional panel
Manual spotlight
Simba M4 C-ITH
Measurements
side view
2360 - 3060
www.atlascopco.com
M4 C-ITH
Illustrations and photos in this brochure may show equipment with optional extras. Specifications and equipment are subjects to change without notice. Consult your Atlas Copco Customer Center for specific information.
M4 C-ITH
Copyright 2008, Atlas Copco Rock Drills AB, rebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited.
2700
2900 3740 3200
Coverage area
A
1150
900
1200 (900)
Feed extension
o
750 1500 750 30 30 o
R
29
1500
70
(R
D)
(PH)
380o
4600
R 27
4915
90 (P
H)
1825
150
A
M4