Professional Documents
Culture Documents
Tyre Mangement SCN Discussion
Tyre Mangement SCN Discussion
Tyre Mangement SCN Discussion
My customer has trucks in his plant , and he needs to track truck wheels depth with the travelling distance ,
also he needs to track wheels serial numbers in each truck
Regards
Mohamed
http://scn.sap.com/docs/DOC-4949
and
http://scn.sap.com/docs/DOC-49361
Regards
Gary B
You do it through Measuring Points, i.e., You would measure both everytime.
Make a layout of IK17 report so that these two are side-by-side to analyze easily.
OR
You can prepare a custom report which displays a ratio of these 2 readings which will be more easily reflect the
performance of the tyre.
SN2 is hasslefree. Then SNo.3 also preferable. SNo1 should not be opted unless some other requirements are
there which are based on Material serialzation.
Jogeswara Rao K
Alternatively, depending on whether your tyre depth measurements are discrete, you could track and report on
them by registering Measuring Documents with Valutation Code That way you can have those data elements
on the same document. (Distance recorded as Characteristic value, Depth as a Valuation Code). But this not
doable if you measure the depth with much precision.
Before conveying what your customer told you, you need to understand that if you want something from the
system, you need to give too to the system. Try to be more specific in your requirements. Walk some distance
with your customer's requirements, translate the rest to SAP language to interact with the forum.
SN1.
Already suggested that Serial numbers to be maintained in the TechId field of Tyre master.
SN2
Truck's Speedometer reading gives the Travel distance.
SN3
Take tyres' depth readings as well as tyre travel distance whenever you measure SN2.
Jogeswara Rao K
You would then need customer-specific report for "depth with the travelling distance".
PeteA
@ Pete , regarding last point , what about entering serial numbers of tires in the truck's master data ??
@ jogeswara you said there will be tire master so what kind of master data you suggested if sub equipment is
not sufficient ??
Jogeswara Rao K
My customer see this is headache to create all these equipment as he only need to record wheels serial
numbers
Regard
Rasshad
If you want a simple option, then this set-up will allow you one equipment master per car, but still allow you to
enter details for each wheel.
If you want more detailed info per wheel, then create a serial number/equipment for each wheel.
PeteA
PeteA
Regards
Rashad