The document summarizes the main technical details of the GEORG precisioncut TBA800 & TBA1000 step-lap lamination cutting lines. The lines can cut strip widths between 80-840mm for the TBA800 and 100-1020mm for the TBA1000. Key features include two or four mandrel decoilers, one or two CNC crosswise V-notches, electric hole punches up to 55mm in diameter, fixed or swing shears, and stacking systems like pile, drum or automatic stackers. The lines are designed for high quality, low burr laminations and can run at maximum speeds of 240m/min continuously.
Epstein Frame Measurement Based Determination of Original Non-Degraded and Fully Degraded Magnetic Characteristics of Material Submitted To Laser Cutting
The document summarizes the main technical details of the GEORG precisioncut TBA800 & TBA1000 step-lap lamination cutting lines. The lines can cut strip widths between 80-840mm for the TBA800 and 100-1020mm for the TBA1000. Key features include two or four mandrel decoilers, one or two CNC crosswise V-notches, electric hole punches up to 55mm in diameter, fixed or swing shears, and stacking systems like pile, drum or automatic stackers. The lines are designed for high quality, low burr laminations and can run at maximum speeds of 240m/min continuously.
The document summarizes the main technical details of the GEORG precisioncut TBA800 & TBA1000 step-lap lamination cutting lines. The lines can cut strip widths between 80-840mm for the TBA800 and 100-1020mm for the TBA1000. Key features include two or four mandrel decoilers, one or two CNC crosswise V-notches, electric hole punches up to 55mm in diameter, fixed or swing shears, and stacking systems like pile, drum or automatic stackers. The lines are designed for high quality, low burr laminations and can run at maximum speeds of 240m/min continuously.
The document summarizes the main technical details of the GEORG precisioncut TBA800 & TBA1000 step-lap lamination cutting lines. The lines can cut strip widths between 80-840mm for the TBA800 and 100-1020mm for the TBA1000. Key features include two or four mandrel decoilers, one or two CNC crosswise V-notches, electric hole punches up to 55mm in diameter, fixed or swing shears, and stacking systems like pile, drum or automatic stackers. The lines are designed for high quality, low burr laminations and can run at maximum speeds of 240m/min continuously.
Step-Lap Lamination Cutting Line GEORG precisioncut TBA800 & TBA1000
Main technical data
Strip width Shear
> 80 to 840 mm (TBA800) > 2 shears fixed at 45/-45 (90) > 100 to 1020 mm (TBA1000) or high speed swing shear
Decoiler Stacking system
> 2 or 4 mandrels or option for long > Wide range: PB/T, DW/T, STA, arm decoiler, capstan & coil car, automatic E stacker automatic strip infeed unit Option V notch > Tip cutting shears > 1 CNC crosswise, electric, > Slot punch for up to 3 slots option for 2nd V notch side by side
Hole punch Max. Speed
> 1 fixed, electric, dia 8 to 55 mm, > 240 m/min option for 2nd, 3rd or 4th, option for cross adjustment
> GEORG quality made in Germany > Superb support by GEORG
> The line can run at full speed 24/7 > Low burr, low loss quality laminations
> Low maintenance, high availability > Scrap saving routines
Epstein Frame Measurement Based Determination of Original Non-Degraded and Fully Degraded Magnetic Characteristics of Material Submitted To Laser Cutting