Professional Documents
Culture Documents
Revised Design Mix of M60 Grade As Per MK Soota
Revised Design Mix of M60 Grade As Per MK Soota
STEP 1-
Target Mean Strength =60+14=74Mpa
STEP 2-
WATER /CEMENTITIOUS MATERIAL RATIO:
W/b ratio has been selected from the graph from attatched as Annexure I ie .29 to .345
WATER CONTENT:
According to IRC: 44 -2008, Table 5,
Since superplasicizer being to be used, we can reduced the water content between 20% to
30%.
STEP 4:
Cementitious Material content =135/0.3=450 Kg,
The cementitious material consists of OPC & Microsilica. Based on our past experience
microsilicais 5% to 6%.
Assuming 6% Microsilica ,
We get X+.06X=450,
STEP 5:
Sand Content = 38%
Coarse Aggregate:
20 mm =60%
10mm =40%
STEP 6:
Superplasicizer fosroc Struturo 100 M,
STEP 7:
Vol.Agg = 1000-425/3.15-25/2.43-6.75/1.06-135=1000-134.92-10.29-6.36-135
=713.43 Kg
Vol.Sand=713.43X38%=271.10 Liters
Mass of Sand= 271.10X2.65=718.41 Kg
Litrs
Vol.CA=713.43X62%=442.32
Mass of Coarse aggregate=442.32X2.68=1185.42 Kg
SUMMARY:
Cement =425 Kg
Microsilica=25 kg
Water =135 Kg
Coarse sand=713 Kg,
Coarse aggregate =20 mm=711 Kg,
Coarse aggregate=10 mm=474 Kg,
Admixture Fosroc structuro 100M=6.75 Kg,
Design Slump 150-200 mm after 2 hours