Professional Documents
Culture Documents
Three Phase High Voltage Thyristor Controlled Trainer With Three Phase Induction Motor (8558)
Three Phase High Voltage Thyristor Controlled Trainer With Three Phase Induction Motor (8558)
Three Phase High Voltage Thyristor Controlled Trainer With Three Phase Induction Motor (8558)
SALIENT FEATURES :
MOTOR :
This trainer is designed for speed control of 3 phase induction motor using V/F method. Voltage
control is obtained by 3 phase SCR fully controlled converter and Frequency control is obtained 3 phase
SCR inverter. Both voltage & frequency are simultaneously controlled.
9 VARIATION :
9 Firing Angle variable from 1800 to 00 through Ramp and pedestal control.
9 Test points are provided on the front panel for detailed study of circuit signals by the student.
9 Necessary test points are terminated at sockets so that the student can monitor / measure/study
the signals using CRO, DVM, etc.
9 One potentiometer to vary the firing angle. monitor all the test points of the control circuitry for
correct functioning.
9 Six SCRs each rated at 1200V @ 25 A, Each SCR is provided with RC snubber.
9 The SCRs are mounted on suitable heat sinks and placed inside a nicely designed cabinet.
9 Facilities are provided for switching ON and OFF, the AC supply to the converter circuit with fuse
and miniature circuit Breaker protection.
-1-
9 THREE PHASE MC - MURRAY INVERTER FOR FREQUENCY VARIATION :
9 Six isolated gate pulses are provided to fire the six number of SCRs.
9 One Potentiometer provided to vary the frequency of the inverter from 10Hz - 50 Hz.
9 6 Nos. of Commutating capacitors and 3 Nos. of center tapped inductors (Rating at 120mH, 4A)
provided.
9 All 6 Nos. of SCRs, Diodes, Capacitors & Inductors forms 3 phase inverter with 180o mode
conduction.
9 POWER SUPPLY :
9 CLOSED LOOP :
9 MOTOR SETUP :
9 One 1hp three phase Induction motor with spring balance load setup.
9 The output of optical encoder is signal conditioned & calibrated to indicate the speed of the AC motor
& give feedback signal for closed loop.
-2-