Professional Documents
Culture Documents
Steel Deck Fastening System PDF
Steel Deck Fastening System PDF
FASTENING SYSTEMS
2014 Supplement to Hilti
North American Product
Technical Guide
RELIABILITY
Ductile and tough, knurled shank steel fastenings improve resistance to wind and seismic forces
Consistent performance in rough project site conditions, largely independent of operator skill level
Code compliant and tested to the latest ICC-ES AC43 requirements for IBC recognition.
FM and UL approved for wind and fire resistance; SDI and CSSBI listed
PRODUCTIVITY
Ergonomic stand-up deck fastening tools with fastening speeds significantly faster than other means (e.g.
welding, screwing, punching)
Quick set-up time for loading, re-loading and troubleshooting; less erection time in the controlled decking zone
Total installed costs can be significantly less than AWS arc spot puddle welding; no special tools required for
proprietary deck types
Use On Demand and Tool Fleet Management tool placement options for erectors
TECHNICAL SUPPORT
Local field engineers and steel and metal project specialists available to assist with training and guidance on
design and specification
Professional decking submittals for steel erectors contractors
Profis DF Diaphragm Design Software with optimization features for structural engineers
Design load tables, guideline specifications and CAD details
SAFETY TRAINING
APPEARANCE
No unsightly weld burn through; no need for touch up paint or zinc coatings as when damaged
by welding
Easy visual identification of proper installation
Clean fastening appearance with reduced need for re-fastening
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Hilti steel deck fastening systems have been extensively Please see the sections 1.2, 1.3, 1.4 and 1.5 for more
evaluated and hold all relevant building code approvals and information on specific product approvals, evaluations and
evaluations including ICC-ES, COLA, FM and UL. application limits.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 1
Steel Deck Fastening Systems
F = diaphragm flexibility factor, micro-inch/lb Button punch - A mechanical means of connecting two
(mm x 10-6/N) pieces of sheet metal together by crimping with a special
tool. This method is used on BI or interlocking deck panels.
G' = diaphragm shear stiffness lb/in. (N/mm x 10-6)
Direct fastening - A fastening method in which the
HSN = Hilti High Shear Nail fastener type for attaching fastenings are made without any preparation steps such
steel deck to bar joist support steel used as drilling a hole. Examples are powder-actuated fastening
with DX 860-HSN and DX 460-SM and self-drilling screws.
powder-actuated tools (X-HSN 24)
Diaphragm deck - A decking system which is designed
q = allowable diaphragm shear, plf (N/mm) to carry lateral loads due to wind or seismic action in addition
Qf = structural connector strength, lb (kN) to gravity loads and wind uplift.
Qs = fastener strength, panel to panel, lb (kN) Endlap - The overlap of adjacent steel deck panels at the
ends of the panels (end edges perpendicular to the steel
Sf = fastener flexibility factor, panel to frame, deck panel fluting). Typically specified as 2 or 4 inches.
in./kip (mm/kN) Butted deck with no endlap is used for some steel deck
Ss = fastener flexibility factor, panel to panel, (e.g., cellular).
in./kip (mm/kN) Fastener pattern - The number and spacing of fasteners at
t f ( t || ) = flange thickness of beam or bar joist for steel each support for a steel deck panel.
deck applications, in. (mm) Fastened material - The component that must be attached
ICC-ES = International Code Council - Evaluation Service to the base or supporting material.
SDI = Steel Deck Institute Fastening - The combination of fastener, fastened material
and base material all in final position.
CSSBI = Canadian Sheet Steel Building Institute
Fastening system - The fastener, fastening tool and driving
1.1.1.2 X
-HVB Shear Connector power source all taken together as a system with specific
Terminology performance characteristics.
hr = nominal rib height, in. (mm) Gauge - A measure of thickness for sheet metal. Reference
Section 1.1.7 for common steel deck gauges.
Hs = connector height, in. (mm)
Interlocking sidelap (BI Connection) - Steel deck panels
Nr = number of connectors in one rib
having male and female side edges. The adjacent deck panel
q = allowable shear strength, lb (kN) male and female edges interlock into each other when the
deck is installed. The interlocks are fastened together using
Qn = nominal shear strength, lb (kN)
button punches, proprietary punch systems, welds,
Rg = coefficient to account for group effect or screws.
wr = average width of rib, in. (mm) Joist - A structural member in a building which is used to
support a floor or roof.
Ycon = distance from top of steel beam to top
of concrete slab, in. (mm)
2 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 3
Steel Deck Fastening Systems
Small element connection tests are used to determine AISI S905 Test Methods for Mechanically Fastened Cold-
fastener pullout, pullover and lap-joint shear strength and Formed Steel Connections
stiffness with sheet steel and base steel representative of ASTM E1190 Standard Test Methods for Strength of
typical construction. The data is analyzed and used in a Power-Actuated Fasteners Installed In Structural Members
predictive model to calculate the performance of the larger ICC-ES AC70 Acceptance Criteria for Fasteners Power
steel deck diaphragm assembly or system. These tests are Driven Into Concrete, Steel and Masonry Elements
conducted in accordance with the following standards, and
ICC-ES AC118 Acceptance Criteria for Tapping Screw
shown in Figure 2. Fasteners
4 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Full scale diaphragm system tests are used to determine ICC-ES AC43 Acceptance Criteria for Steel Deck
the strength and stiffness of a larger steel deck diaphragm Roof and Floor Systems
assembly directly. The data is analyzed and fit in a predictive
AISI S907 Cantilever Test Method for Cold-Formed
model to address varying configurations of base steel, steel
Steel Diaphragms
deck, specific fastener combinations and spans. These tests
are conducted in accordance with the following standards and ASTM E455 Standard Test Method for Static Load
shown in Figures 3, 4 and 5. Testing of Framed Floor or Roof Diaphragm
Constructions for Buildings
30
'-0
"
"
24'-0
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 5
Steel Deck Fastening Systems
6 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 7
Steel Deck Fastening Systems
* Optimal stand-off (hNVS) range for the X-HSN 24 fastener is 5 mm hNVS 9 mm.
8 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
* Optimal stand-off (hNVS) range for the X-ENP-19 fastener is 8.2 mm hNVS 9.8 mm.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 9
Steel Deck Fastening Systems
Solutions for bar joist (open web joists) applications (Reference Section 1.2 and 1.4)
DX 460-SM
SDT 5
Solutions for structural steel applications (Reference Section 1.3)
DX 76
X-ENP-19 L15
DX 860-ENP-L
SDT 5
10 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
1 Steel base material strength (Fu ) shall be in the range of 58 to 91 ksi for base steel thicknesses (tf ) less than or equal to 5/16". For base
steel thicknesses greater than 5/16", the tensile strength shall be in the range of 58 to 75 ksi.
2 The X-HSN 24 and Racing Tip Fastening Systems will fit in all deck types except A-deck.
3 This fastener can be used with structural steel within the thickness ranges shown.
S-SLC O2 MHWH
16 to 22 SDT 5
1 For use with all types of nestable deck or screwable interlocking deck.
2 Other sidelap connector types are possible with Hiltis powder actuated frame fasteners. Please reference the Steel Deck Institute (SDI)
Diaphragm Design Manual 3rd Edition (DDM03).
3 Use of S-SLC 01 M HWH with 18 gauge steel deck is recommended only for standard tensile strength (45 Fu 65 ksi) steel deck.
For high tensile strength (Fu > 65 ksi) 18 gauge steel deck, use S-SLC 02 M HWH.
Sealing Caps
The SDK2 is an SAE 316 stainless steel sealing cap with a
neoprene seal. This is installed over the head of the X-ENP-19
fastener using the SDK2 hand setting
tool. The SDK2 sealing cap provides
added corrosion protection for exposed
exterior steel deck applications in SDK2 Setting Tool SDK2 Sealing Cap X-ENP-19 L15
accordance with IBC requirements. hnvs = 8.2 mm- 9.8 mm
Note: The sealing cap and fastener must be installed correctly to achieve a water-resistant seal. Contact Hilti for details.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 11
Steel Deck Fastening Systems
Gauge purlin and light bar joist screw frame tool and deck-to-deck sidelap fastening tool
(Reference Section 1.4 or 1.5)
SDT 5 The SDT 5 stand up decking tool is a steel deck sidelap and frame
fastening tool. Combined with the DX 860-HSN or DX 860-ENP-L,
these tools deliver a high speed, high productivity system for
mechanical attachment of steel deck. The SDT 5 can consistently
drive up to 50 S-MD 12-24x1-5/8 M HWH5 frame fasteners or
SLC sidelap connectors before reloading. Its comfortable, durable
design features an 18 position torque clutch to provide consistent
fastening quality. In a competitive market, the SDT 5 represents
a major gain in productivity essential to staying on time and on
budget.
12 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
X-HSN 24 X-ENP-19
Figure 14: Cartridge and Power Regulation Guidelines for Figure 15: Cartridge and Power Regulation Guidelines for
Bar Joist Deck Fasteners installed with a DX 860-HSN1 Structural Steel Deck Fasteners1
1 Cartridge recommendations for the X-ENP-19 fastener are acceptable for all current Hilti Decking Tools for attachment to structural steel.
Cartridge recommendations for the X-HSN 24 fasteners are for the DX 860-HSN. Cartridge recommendations for the DX 460-SM can be
found in the tool operator manual. Recommendations are guidelines only and require verification on each site.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 13
Steel Deck Fastening Systems
Bar Str.
Joist Steel Design Diaphragm Shear
Zone _______ Support Span (ft) _______ Support Steel Capacity (plf) ________
Subst. Frame: X-ENP-19 RT5 Subst. Sidelap: Hilti SLC # 10 Screw # 12 Screw Exposed to Weather
X-HSN 24 Button Punch Proprietary Punch System
Deck Type Deck Gauge Frame Type Frame Pattern Sidelap Type Sidelap Pattern Base Thickness
B (1.5") 24 1/2" PW 36 / 9 #10 Screw _____# Per Span < 3/16"
BI (1.5") 22 5/8" PW 30 / 7 #12 Screw _____(in.) On Center 3/16"
N (3") 20 3/4" PW 24 / 5 Button Punch 1/4"
Other 18 #12 or #14 Screw __ / 4 _______(in.) Top Seam Weld Length 5/16"
16 Other 3 Proprietary Punch System 3/8"
__ Other > 3/8"
Bar Str.
Joist Steel Design Diaphragm Shear
Zone _______ Support Span (ft) _______ Support Steel Capacity (plf) ________
Subst. Frame: X-ENP-19 RT5 Subst. Sidelap: Hilti SLC # 10 Screw # 12 Screw Exposed to Weather
X-HSN 24 Button Punch Proprietary Punch System
Deck Type Deck Gauge Frame Type Frame Pattern Sidelap Type Sidelap Pattern Base Thickness
B (1.5") 24 1/2" PW 36 / 9 #10 Screw _____# Per Span < 3/16"
BI (1.5") 22 5/8" PW 30 / 7 #12 Screw _____(in.) On Center 3/16"
N (3") 20 3/4" PW 24 / 5 Button Punch 1/4"
Other 18 #12 or #14 Screw __ / 4 _______(in.) Top Seam Weld Length 5/16"
16 Other 3 Proprietary Punch System 3/8"
__ Other > 3/8"
Notes
Fax or email completed forms to Hilti Technical Support at (918) 459-3004 or deck@hilti.com.
14 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Bar Str.
Joist Steel Design Diaphragm Shear
Zone _______ Support Span (ft) _______ Support Steel Capacity (plf) ________
Subst. Frame: X-ENP-19 RT5 Subst. Sidelap: Hilti SLC # 10 Screw # 12 Screw
X-HSN 24 Button Punch Proprietary Punch System
Deck Type Deck Gauge Frame Type Frame Pattern Sidelap Type Sidelap Pattern Base Thickness
B (1.5") 28 1/2" PW 36 / 9 #10 Screw _____ # Per Span < 3/16"
B (1.5") 26 5/8" PW 30 / 7 #12 Screw _____ (in.) on Center 3/16"
N (3") 24 3/4" PW 24 / 5 Button Punch 1/4"
2" x 12" 22 #12 or #14 Screw __ / 4 ____ (in.) Top Seam Weld Length 5/16"
3" x 12" 20 Other 3 Other 3/8"
9/16" 18 __ > 3/8"
Other 16
Normal Weight Concrete. . . 3000 psi _________(Inches) Concrete Depth Above Top of Flute
Lightweight Concrete. . . . . 3500 psi
4000 psi
Insulating Concrete. . . . . . . 130 psi
Perform Calculations based on Shear Studs Present in Design
Deck fastened at a 36/4 pattern with standing seam sidelaps fastened by button punches @ 36" O.C. maximum.
Refer to ICC-ES ESR-2197, Tables 10-17, for more details.
Minimum Average Spacing of Shear Studs 12" 18" 24" 30" 36"
Minimum Welded Wire Fabric for Tabulated Shear Values 6 x 6 W 1.4 x W 1.4
6 x 6 W 2.0 x W 2.0
6 x 6 W 2.9 x W 2.9
6 x 6 W 4.0 x W 4.0
4 x 4 W 4.0 x W 4.0
6 x 6 W 7.5 x W 7.5
6 x 6 W 8.3 x W 8.3
Notes
Fax or email completed forms to Hilti Technical Support at (918) 459-3004 or deck@hilti.com.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 15
Steel Deck Fastening Systems
Gauge
2.5" Steel Thickness, t
(GA)
in. (mm)
B 16-24 GA
1.75"
16 0.0598 (1.52)
36"
18 0.0474 (1.21)
20 0.0358 (0.91)
6" 2.5" 3.5"
1.75" 22 0.0295 (0.76)
BI 16-24 GA
1.5"
24 0.0239 (0.61)
36"
26 0.0179 (0.45)
8"
28 0.0149 (0.38)
2.75" 1 Dimensions shown are typical. However,
the Structural Engineer should always
3"
manufacturer.
2 Deck gauge inch equivalents taken from
6"
SDI Diaphragm Design Manual. Millimeter
1.5"
7.25"
1"
Composite
16-22 GA
Deck
4.75" 36"
9/16"
1.5" 2.5"
Form Deck 24-28 GA
1"
30"
16 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 17
Steel Deck Fastening Systems
( )
1
design equations: t
C = 29,500
x x S x S x < x 12 (Eq. 3.3-1)
Ext w f
1 + 2 + ns x f
G' = Ss
3.78 + 0.9 x Dn + C , kips/in. (Eq. 3.3-3)
D
Dn = (Eq. 3.3-2)
1000 < x 12
F= , micro-inches/lb
G'
Reference Tables 7 and 9 for description and values of other
E = modulus of elasticity for steel = 29,500 ksi variables for common conditions.
Table 7 Diaphragm strength (S) and stiffness factor (G') equation variable values
1 end 2 purlin D-Warping constant, in.
Deck Fastener Sxe2, Sxp2, N,
distribution distribution A
type pattern in.2 in.2 ft-1 22 GA 20 GA 18 GA 16 GA
factor factor
1-1/2" 36/11 3.667 3.667 1944 1944 2 3.000 1548 1164 756 540
Wide 36/9 3.000 3.000 1656 1656 2 2.333 1548 1164 756 540
Rib B- 36/7 2.000 2.000 1008 1008 1 2.000 1548 1164 756 540
Deck or 36/5 1.667 1.667 936 936 1 1.333 9096 6804 4464 3144
BI- 36/4 1.333 1.333 720 720 1 1.000 12864 9624 6312 4452
Deck 36/3 1.000 1.000 648 648 1 0.667 26508 19824 13008 9180
18 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Table 10 Minimum recommended sidelap connector spacing (Inches center-to-center) for X-HSN 24 and X-ENP-19
powder-actuated fasteners with B-Deck or BI-Deck type
Frame fastener Frame fastener pattern
Deck
base material 36/3 36/4 36/5 36/7 36/92 36/112
gauge
thickness, in.
SLC1 #10 SLC1 #10 SLC1 #10 SLC1 #10 SLC1 #10 SLC1 #10
22
X-HSN 24 20 12 6 12 6 6 3 6 3 6 3
1/8 tf < 3/16
18
16
22
12 3
X-HSN 24 20
3/16 tf 3/8 6 3 6 3 3 3 3 3 3 3
18
16
22
X-ENP-19 20
6 3 6 3 6 3 3 3 3 3 3 3
tf 1/4 18
16
1 Hilti SLC spacings less than those tabulated may be used. The tabulated spacing should be used in the calculation of diaphragm shear strength when using
the Qf, Qs and c values from Table 8. Alternatively, only when the SLC spacings are less than those tabulated, the Qf, Qs and c values found in Table 8 can be
replaced by the following values.
X-HSN 24 All deck types, strengths and base steel thicknesses listed in Table 8
22 Gauge (0.0295 in.)- Qf = 1489 lb, Qs = 716 lb, c = 1.000
20 Gauge (0.0358 in.)- Qf = 1795 lb, Qs = 869 lb, c = 1.000
18 Gauge (0.0474 in.)- Qf = 2348 lb, Qs = 1151 lb, c = 1.000
16 Gauge (0.0598 in.) - Qf = 2924 lb, Qs = 1452 lb, c = 1.000
2 For 36/9 and 36/11 patterns, when wind (or seismic) diaphragm shear capacities exceed the values shown below, the fastening pattern must be increased at
the building perimeter, chords, collectors or other shear transfer elements to two fasteners per rib (i.e. 36/14 pattern). The wind (or seismic) diaphragm shear
capacity must not be greater than that determined from the 36/9 and 36/11 patterns, as applicable.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 19
Steel Deck Fastening Systems
Table 12- ASD and LRFD diaphragm shears (plf) and LSD diaphragm shears (N/mm) for buckling, Sbuckling1,2
Moment of Span, <v (ft-in.)
Steel Deck Deck
inertia, I
type gauge 3'-0" 4'-0" 5'-0" 6'-0" 7'-0" 8'-0" 9'-0" 10'-0" 11'-0" 12'-0"
mm4/mm
ASD (plf)
Standard 1-1/2- 22 0.152 8444 4750 3040 2111 1551 1188 938 760 628 528
inch deep flutes, 20 0.198 11000 6188 3960 2750 2020 1547 1222 990 818 688
6-inches center- 18 0.284 15778 8875 5680 3944 2898 2219 1753 1420 1174 986
to-center 16 0.355 19720 11094 7100 4931 3622 2773 2191 1775 1467 1233
LRFD (plf)
Standard 1-1/2- 22 0.152 13511 7600 4864 3378 2482 1900 1501 1216 1005 844
inch deep flutes, 20 0.198 17600 9900 6336 4400 3233 2475 1956 1584 1309 1100
6-inches center- 18 0.284 25244 14200 9088 6311 4637 3550 2805 2272 1878 1578
to-center 16 0.355 31556 17750 11360 7889 5796 4438 3506 2840 2347 1972
Moment of Span, <v (mm)
Steel deck Deck
inertia, I
type gauge 900 1200 1500 1800 2100 2400 2700 3000 3300 3600
mm4/mm
LSD (N/mm)
Standard 1-1/2- 22 208 192.6 108.3 69.3 48.1 35.4 27.1 21.4 17.3 14.3 12.0
inch deep flutes, 20 270 250.0 140.6 90.0 62.5 45.9 35.2 27.8 22.5 18.6 15.6
6-inches center- 18 388 359.3 202.1 129.3 89.8 66.0 50.5 39.9 32.3 26.7 22.5
to-center 16 485 449.1 252.6 161.7 112.3 82.5 63.2 49.9 40.4 33.4 28.1
1 Load values based upon a safety factor () of 2.00 for ASD, a phi factor () of 0.80 for LRFD or a phi factor () of 0.75 for LSD.
2 Diaphragm shears in this table are for steel deck buckling failure mode only and are to be used as prescribed in Section 1.1.8. If design condition is not
tabulated, diaphragm shears for buckling may be calculated using the following equations:
For ASD, Sbuckling = (I x 106/(< v)2) / 2.0 , plf
For LRFD, Sbuckling = (I x 106/(< v)2) x 0.8 , plf
For LSD, Sbuckling = (I x 106/(< v)2) x 0.75 , N/mm
20 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Note 1: Nestable B-Deck shown. Interlocking BI-Deck with screwable sidelap is also covered by the equations discussed in Section 1.1.8.
Note 2: Bar joist shown. Connection to structural steel members also covered by the equations discussed in Section 1.1.8.
17c. Sidelap connector with B-Deck 17d. Sidelap connector with screwable BI-Deck
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 21
Steel Deck Fastening Systems
Example problem
Design parameters: Design problem:
6"
36" 1-1/2" X-HSN 24
SDI HNA
Calculation steps DDM03 Technical
Ref. Guide
Step 1: Calculate nominal diaphragm shear strength limited by edge fasteners:
Eq. Sec.
This calculation is not required when the number of edge connectors (ne) equals the number of sidelap 2.2-2 1.1.8
fasteners (ns). In these cases, Sne does not limit diaphragm shear strength.
Step 2: Calculate nominal diaphragm shear strength limited by interior panel fasteners:
Q 2107
S ni = {2 x A x (- 1) + B} x f = {2 x 1 x (0.802 - 1) + 16.99} x = 1,942 plf
< 18
with:
1.5 x < v 1.5 x 6
= 1- = 1- = 0.802 0.7
240 x t 240 x 0.0358 Sec.
1.1.8
1 [2 x 2 x 1008 + 4 x 1008] Eq.
B = ns x s + x [ 2 x 2 x S ( xp2 ) + 4 S ( xe2 ) ] = 18 x 0.598 + = 16.99 and
2.2.3
w 2
362 Tables
where: 7 and 8
3 x < v x 12 3 x 6 x 12
ns = ne = = = 18
Sidelap Spacing 12
Qs 1260
s = = = 0.598
Qf 2107
Step 3: Calculate nominal diaphragm shear strength limited by corner fasteners: Sec.
1.1.8
N xB
2 2
2.00 x 16.99
2 2
Eq.
S nc = Q f x = 2107 x = 1,798 plf and
<2 x N 2 + B 2 182 x 2.002 + 16.992 2.2-5
Tables
7 and 8
Step 4: Apply correlation factor, c, to determine correlated nominal diaphragm shear strength Sec.
S = c x Sn = 1.102 x 1,798 = 1,981 plf 1.1.8
where: and
Sn = least of Sne, Sni and Snc = Snc = 1,798 plf Table 8
Step 5: Apply appropriate conversion factor to determine allowable diaphragm strength Sec.
Table 11
SASD (wind) = S x Conversion Factor = 1,981 x 0.426 = 844 plf 2.4
22 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
SDI HNA
Calculation steps DDM03 Technical
Ref. Guide
Step 7: Calculate diaphragm stiffness:
Ext 29,500 x 0.0358
G' = = = 86 kips/in.
3.78 + 0.9 x Dn + C 3.78 + 0.9 x 5.39 + 3.65
1000 1000
F= = = 11.6 micro-inches/lb
G' 85.99
where: Sec.
D 1164 1.1.8
Dn = = = 5.39 Eq.
< x 12 18 x 12 and
3.3-3
1 Tables
C =Ex
t x Sf
w (
x + + n x Sf
1 2 s
Ss
1
)
x < x 12
7 and 9
C = 29,500 x
0.0358 x 0.0066
36 (
x 2 + 2 + 18 x 0.0066
0.0159 ) x 18 x 12 = 3.65
Hilti is a leading manufacturer of direct fastening systems for Diaphragm data is calculated in accordance with SDI
steel and metal applications. As a member of the Steel Deck Diaphragm Design equations using specific Hilti fastener
Institute (SDI), Hilti participates in and supports steel deck strength and stiffness values with data correlation adjustment
industry research at leading universities and test labs. Recent factors in accordance with ICC-ES AC43 requirements.
research projects with Hilti direct fastening systems have
included inelastic seismic deck diaphragms and deep deck /
cellular deck diaphragms.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 23
36/3 914/3
6'' 152 mm
Steel Deck Fastening Systems 36'' 1-1/2'' 914 mm 38 mm
The Hilti bar joist deck fastening system into the DX 860-HSN tool, along with the 1.2.2 Material Specifications
consists of powder-actuated tools that cartridge strip, and enable the operator 1.2.3 Technical Data
are primarily used with the X-HSN 24 to fasten at a rate of up to 1,000 quality 1.2.4 Ordering Information
fasteners, which are available in a fastenings per hour. Additionally, this
collated version. tool offers punch through resistance
in cases where the base material is
For many bar joist decking projects, the
inadvertently missed.
tool of choice is the DX 860-HSN tool.
This self-contained stand up decking Other tools include the hand held
tool is powered by 0.27 caliber short DX 460-SM, a semi-automatic magazine
cartridges, which are loaded into the tool for use on smaller jobs or in tandem
tool in strips of 40. The cartridges drive with the DX 860-HSN.
the X-HSN 24 fasteners into almost
Hilti X-HSN 24 steel deck fasteners
any type of steel deck profile and base
comply with ANSI/SDI RD1.0, C1.0
steel thicknesses of 1/8" to 3/8". These X-HSN 24
and NC1.0 standards.
fasteners are available in collated strips
of 10. Four of these strips are loaded Approvals/Listings
ICC-ES (International Code Council)
ESR-3592, ESR-2776, ESR-2197,
1.2.2 Material Specifications ESR-1116, ESR-1735P, ESR-1414,
Fastener Fastener Fastener Nominal fastener ESR-2408
designation material plating hardness COLA (City of Los Angeles)
Carbon Steel 5 m Zinc1
RR 25974, RR 25877, RR 25296
X-HSN 24 55.5 HRC
FM (Factory Mutual)
1 ASTM B633, SC 1, Type III. Reference Section 2.3.3.1 of Hilti North American Product Technical Guide For attaching Class 1 Steel Roof Decks
Volume 1: Direct Fastening for more information. with 1-60 and 1-90 wind uplift ratings.
Refer to FM RoofNav for specific
1.2.3 Technical Data assembly listings.
UL (Underwriters Laboratories)
Allowable pullout loads for attachments to steel base material lb (kN)1, 2, 3
Fasteners for attaching steel roof deck
Base material thickness (in.) (uplift and fire classification)
Fastener
1/8 3/16 1/4 3/8
X-HSN 24 435 (1.95) 635 (2.82) 750 (3.34) 750 (3.34)
1 These values represent testing performed in ASTM A36 plate steel.
2 The values must be compared with allowable tensile pullover values.
3 Allowable values based on safety factor of 5.0.
Allowable pullover and shear bearing loads for attaching steel deck1,2,3
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 25
6'' 6'' 152 mm
36'' 1-1/2'' 36'' 1-1/2''
914 mm 38 mm
26 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
6'' 6'' 152 mm
36'' 1-1/2'' 36'' 1-1/2''
914 mm 38 mm
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 27
6'' 6'' 152 mm
36'' 1-1/2'' 36'' 1-1/2''
914 mm 38 mm
28 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
6'' 6'' 152 mm
36'' 1-1/2'' 36'' 1-1/2''
914 mm 38 mm
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 29
6'' 152 mm
36'' 914 mm
1-1/2'' 38 mm 914 mm 38 mm
30 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
6'' 152 mm
36'' 914 mm
1-1/2'' 38 mm 914 mm 38 mm
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 31
Steel Deck Fastening Systems
Diaphragm Table 36-4 Limit States Design (LSD)-Factored Resistance Diaphragm Shear, q, (N/mm) and Flexibility Factor, F, (mm x 10-6/N)
with X-HSN 24 Metric for 38 mm deep steel nestable deck fastened w/Hilti X-HSN 24 w/screwed sidelaps (Canada only)1,2,3
No. of transverse nails per 900 mm wide deck units=4 (every other flute)
Sidelap Connection #10 screw at 600 mm O.C. #10 screw at 450 mm O.C. #10 screw at 300 mm O.C. #10 screw at 150 mm O.C.
Span (mm)
deck gauge thickness 22 20 18 16 22 20 18 16 22 20 18 16 22 20 18 16
Strength, SLSD 4.7 5.6 7.4 9.3 4.7 5.6 7.4 9.3 6.2 7.4 9.8 12.2 8.1 9.8 12.8 16.0
1200
Flexibility Factor, F 595 384 210 132 595 384 210 132 578 369 197 120 567 359 188 113
Strength, SLSD 3.9 4.7 6.1 7.6 4.6 5.5 7.3 9.2 5.9 7.1 9.3 11.6 7.9 9.5 12.6 15.7
1500
Flexibility Factor, F 500 328 186 122 487 317 176 113 474 305 166 103 462 294 156 95
Strength, SLSD 4.0 4.7 6.2 7.8 4.6 5.5 7.2 9.2 5.6 6.8 8.9 11.2 7.8 9.4 12.3 15.5
1800
Flexibility Factor, F 425 281 161 106 415 272 154 100 405 262 145 92 392 251 135 83
Strength, SLSD 3.4 4.1 5.4 6.8 4.0 4.8 6.3 7.9 5.4 6.6 8.6 10.8 7.6 9.3 12.2 15.3
2100
Flexibility Factor, F 383 257 152 103 372 247 143 96 355 232 130 84 342 220 120 75
Strength, SLSD 3.5 4.2 5.6 7.1 4.0 4.8 6.3 8.0 5.3 6.3 8.5 10.6 7.6 9.2 12.1 15.2
2400
Flexibility Factor, F 340 230 137 94 332 222 130 88 318 209 119 78 304 197 108 68
Strength, SLSD 3.1 3.8 4.9 6.2 4.0 4.9 6.5 8.1 5.2 6.2 8.2 10.3 7.5 9.2 12.0 15.0
2700
Flexibility Factor, F 318 218 133 93 301 203 120 82 289 192 110 73 275 179 99 63
Strength, SLSD 3.2 3.9 5.2 6.6 3.6 4.5 5.9 7.4 5.1 6.2 8.1 10.2 7.5 9.0 12.0 14.9
3000
Flexibility Factor, F 290 365 123 86 283 193 117 81 266 177 103 69 252 165 92 59
Diaphragm Table 36-7 Limit States Design (LSD)-Factored Resistance Diaphragm Shear, q, (N/mm) and Flexibility Factor, F, (mm x 10-6/N)
with X-HSN 24 Metric for 38 mm deep steel deck fastened w/Hilti X-HSN 24 w/button punch sidelaps (Canada only)1,2,3
No. of transverse nails per 900 mm wide deck units=7 (every flute)
Sidelap Connection Button Punch 600 mm O.C. Button Punch 450 mm O.C. Button Punch 300 mm O.C. Button Punch 150 mm O.C.
Span (mm)
deck gauge thickness 22 20 18 16 22 20 18 16 22 20 18 16 22 20 18 16
Strength, SLSD 5.8 7.1 9.5 12.1 5.8 7.1 9.5 12.1 6.5 8.1 11.2 14.8 7.8 10.0 14.3 19.6
1200
Flexibility Factor, F 129 96 67 51 129 96 67 51 126 94 65 50 122 90 62 47
Strength, SLSD 4.6 5.6 7.5 9.8 4.8 6.0 8.3 10.9 5.5 6.9 9.9 13.2 6.9 8.9 13.2 18.2
1500
Flexibility Factor, F 126 97 71 56 125 96 69 55 122 94 67 53 116 88 63 49
Strength, SLSD 4.0 4.9 6.9 9.2 4.2 5.4 7.5 10.1 4.8 6.1 8.8 12.1 6.2 8.2 12.2 17.3
1800
Flexibility Factor, F 126 100 75 61 124 98 73 59 121 95 71 57 114 89 65 52
Strength, SLSD 3.4 4.2 5.9 7.8 3.6 4.6 6.5 8.7 4.2 5.5 8.1 11.3 5.8 7.8 11.6 16.6
2100
Flexibility Factor, F 130 105 81 66 128 103 79 65 122 98 75 61 113 90 67 55
Strength, SLSD 3.2 4.0 5.6 7.5 3.3 4.2 6.1 8.3 3.9 5.1 7.5 10.7 5.4 7.3 11.2 16.0
2400
Flexibility Factor, F 133 109 85 71 130 107 83 69 125 102 79 66 113 91 70 57
Strength, SLSD 2.7 3.5 4.9 6.6 3.1 4.0 5.8 8.0 3.6 4.7 7.2 10.1 5.2 6.9 10.8 15.6
2700
Flexibility Factor, F 139 115 92 77 134 111 88 74 128 106 83 70 114 93 72 60
Strength, SLSD 2.6 3.3 4.8 6.6 2.7 3.5 5.2 7.2 3.4 4.5 6.8 9.8 4.9 6.7 10.5 15.3
3000
Flexibility Factor, F 143 120 96 81 140 118 94 80 131 110 87 73 115 95 75 62
1 The ratio of span of deck unit to average length of sheet is taken to be 1/3.
2 Diaphragm loads are based on steel decks having an average ultimate tensile strength of 55 ksi.
3 Values shown calculated in accordance with SDI equations using a factor of 0.5 for LSD for all load conditions.
32 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Diaphragm Table 24-5 Limit States Design (LSD)-Factored Resistance Diaphragm Shear, q, (N/mm) and Flexibility Factor, F, (mm x 10-6/N)
with X-HSN 24 Metric for 75 mm deep steel deck fastened with Hilti X-HSN 24 w/button punch sidelaps (Canada only)1, 2, 3
No. of transverse nails per 600 mm wide deck units=5 (every flute)
Sidelap Connection Button Punch 600 mm O.C. Button Punch 450 mm O.C. Button Punch 300 mm O.C. Button Punch 150 mm O.C.
Span (mm)
Deck gauge thickness 22 20 18 16 22 20 18 16 22 20 18 16 22 20 18 16
Strength, SLSD 2.0 2.6 3.7 5.2 2.1 2.8 4.2 5.8 2.6 3.5 5.4 7.8 3.9 5.4 8.8 12.9
2400
Flexibility Factor, F 281 227 173 143 275 222 169 139 262 209 158 130 235 185 137 111
Strength, SLSD 1.7 2.2 3.3 4.5 2.0 2.6 4.0 5.7 2.4 3.3 5.1 7.5 3.7 5.2 8.5 12.6
2700
Flexibility Factor, F 290 238 185 154 279 227 176 146 264 214 165 136 233 186 140 115
Strength, SLSD 1.6 2.1 3.2 4.5 1.7 2.3 3.5 5.1 2.3 3.1 4.9 7.2 3.6 5.0 8.2 12.4
1800
Flexibility Factor, F 295 244 192 161 289 238 187 157 268 220 171 143 233 188 143 118
Strength, SLSD 1.4 1.9 2.9 4.1 1.7 2.2 3.5 5.0 2.1 2.9 4.7 7.0 3.4 4.8 8.0 12.2
3300
Flexibility Factor, F 307 257 205 173 293 245 194 164 272 225 177 149 233 189 146 121
Strength, SLSD 1.4 1.9 2.9 4.1 1.6 2.2 3.4 5.0 2.0 2.8 4.5 6.8 3.3 4.7 7.9 12
3600
Flexibility Factor, F 312 263 211 180 299 251 201 170 277 231 183 155 233 191 149 124
Strength, SLSD 1.2 1.7 2.6 3.8 1.4 2.0 3.1 4.6 1.9 2.7 4.4 6.6 3.2 4.6 7.8 11.9
3900
Flexibility Factor, F 325 276 224 191 311 263 212 181 282 237 189 160 234 193 152 127
Strength, SLSD 1.2 1.6 2.6 3.8 1.4 1.9 3.1 4.6 1.9 2.6 4.3 6.5 3.2 4.5 7.6 11.8
4200
Flexibility Factor, F 331 282 230 197 316 269 218 186 287 242 195 166 235 195 154 129
1 The ratio of span of deck unit to average length of sheet is taken to be 1/3.
2 Diaphragm loads are based on steel decks having an average ultimate tensile strength of 55 ksi.
3 Values shown calculated in accordance with SDI equations using a factor of 0.5 for LSD for all load conditions.
Note: Reference pages 30-31 for generally higher diaphragm capacities with Hilti Sidelap Connectors (SLC).
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 33
Steel Deck Fastening Systems
Accessories
Description Notes Qty
Replacement piston and brake
HSN Piston and Brake Spares Pack 1 pcs
for DX 860-HSN
Accessories
Description Notes Qty
Magazine X-SM Replacement magazine for DX 460-SM 1 pcs
Piston X-AP PSM Replacement piston for DX 460-SM 1 pcs
Buffer (reinforced) X-460-B Replacement buffer for DX-460-SM 1 pcs
34 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
The Hilti structural steel deck fastening fasteners are available in collated strips 1.3.2 Material Specifications
system consists of powder-actuated of 10. Four of these strips are loaded into 1.3.3 Technical Data
tools which are primarily used with one the DX 860-ENP-L tool along with the 1.3.4 Ordering Information
fastener: the X-ENP-19 L15, which is cartridge strip, and enable the operator
available either collated or non-collated. to fasten at a rate of up to 1,000 quality
fastenings per hour.
For most structural steel decking jobs,
the tool of choice is the DX 860-ENP-L Other tools include the hand held X-ENP-19 L15 MX and MXR
tool. This self-contained stand up decking DX 76-MX, a semi-automatic magazine
tool is powered by 0.27 caliber long tool. Other configurations of the DX 76
cartridges, which are loaded into the tool include a single fastener guide variation
in strips of 40. The cartridges drive the of the tool for miscellaneous use.
X-ENP-19 L15 MXR fastener (collated
Hilti X-ENP-19 steel deck fasteners
version) into almost any type
comply with ANSI/SDI RD1.0, C1.0
of steel deck and base steel thicknesses
and NC1.0 standards. X-ENP-19 L15
greater than or equal to 1/4". These
Approvals/Listings
1.3.2 Material Specifications ICC-ES (International Code Council)
ESR-2776, ESR-2197, ESR-1116,
Fastener Fastener Nominal fastener
Fastener ESR-1169, ESR-1414
material plating hardness
COLA (City of Los Angeles)
X-ENP-19 L15 Carbon Steel 5 m Zinc1 58 HRC RR 25877, RR 25296
1 ASTM B633, SC 1, Type III. Reference Section 2.3.3.1 of Hilti North American Product Technical Guide FM (Factory Mutual)
Volume 1: Direct Fastening for more information. For attaching Class 1 Steel Roof Decks
with 1-60 and 1-90 wind uplift ratings.
Listed for higher wind uplift ratings with
1.3.3 Technical Data FM Approved Lightweight Insulating
Allowable pullout loads for attachments to steel base material lb (kN)1, 2, 3 Concrete Roof Deck Assemblies.
Refer to FM RoofNav for specific
Base material thickness (in.) assembly listings.
Fastener UL (Underwriters Laboratories)
1/4 3/8 1/2 4 5/8 4
X-ENP-19 L15 905 (4.03) 1125 (5.00) 1010 (4.49) 965 (4.29) Fasteners for attaching steel roof deck
(uplift and fire classification)
1 These values represent testing performed in ASTM A36 plate steel.
ABS (American Bureau of Shipping)
2 The values must be compared with allowable tensile pullover values.
3 Allowable values based on safety factor of 5.0.
4 Allowable values are based on minimum 1/2" penetration depth through or into base steel. For 3/8"
penetration depth into 1/2" and thicker steels, reduce the allowable load capacity to 635 lb (2.79 kN).
Allowable pullover and shear bearing loads for attaching steel deck 1,2,3
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 35
6'' 152 mm
36'' 1-1/2'' 36'' 1-1/2''
914 mm 38 mm
36 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
152 mm
36'' 1-1/2'' 36'' 1-1/2''
914 mm 38 mm
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 37
6'' 152 mm
36'' 1-1/2'' 36'' 1-1/2''
914 mm 38 mm
38 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
152 mm
36'' 1-1/2'' 36'' 1-1/2''
914 mm 38 mm
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 39
6'' 152 mm 152 mm
36'' 1-1/2''
914 mm 38 mm 914 mm 38 mm
40 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
6''152 mm 152 mm
36'' 914 mm1-1/2'' 38 mm 914 mm 38 mm
6''152 mm 152 mm
36'' 914 mm1-1/2'' 38 mm 914 mm 38 mm
Limit States Design (LSD)- Factored resistance diaphragm shears, SLSD, (N/mm) and stiffness factors, G', (103 N/mm)
for standard 38 mm deep flutes, 152 mm center-to-center steel deck (Fy 230 MPa; Fu 310 MPa) installed with Hilti
X-ENP-19 L15 fasteners with 914/5 (36/5) or 914/4 (36/4) end and interior support fastener patterns1,2,3,4,5
Span (mm)
Sidelap 1200 1500 1800 2100 2400 2700 3000
Gauge spacing Factor
Hilti 36/5
SLC6,7,8 Fasteners per sheet to support
914/7 914/5
5 4 5 4 5 4 5 4 5 4 5 4 5 4
SLSD 11.4 9.2 10.0 8.2 9.0 7.5 8.3 7.0 7.6 6.5 7.1 6.2 6.7 5.9
900
6''mm
152 o.c.
mm G' 2.3 1.7 2.8 2.1 3.2 2.4 3.6152 mm2.7 4.0 3.0 4.3 3.2 4.6 3.5
36'' 914 mm1-1/2'' 38 mm 914 mm 38 mm
SLSD 12.5 10.3 11.3 9.4 10.3 8.8 9.7 8.3 9.1 7.9 8.7 7.6 8.3 7.4
600 mm o.c.
G' 2.4 1.7 2.8 2.1 3.3 2.4 3.7 2.8 4.1 3.1 4.4 3.3 4.7 3.6
SLSD 13.6 11.3 12.4 10.5 11.6 9.9 11.0 9.5 10.5 9.1 10.1 8.9 9.7 8.6
450 mm o.c.
G' 2.4 1.7 2.9 2.1 3.3 2.5 3.8 2.8 4.1 3.1 4.5 3.4 4.9 3.7
22
SLSD 15.5 12.8 14.5 12.2 13.8 11.8 13.3 11.4 12.8 11.2 12.5 11.0 12.2 10.8
300 mm o.c.
G' 2.4 1.7 2.9 2.1 3.4 2.5 3.8 2.8 4.3 3.2 4.7 3.5 5.0 3.8
SLSD 19.2 15.6 18.7 15.3 18.3 15.1 18.0 15.0 17.7 14.8 17.5 14.7 17.2 14.7
36/7o.c.
150 mm 914/9 914/7
G' 2.4 1.7 2.9 2.1 3.5 2.5 3.9 2.9 4.4 3.3 4.9 3.6 5.3 4.0
SLSD 19.2 15.6 18.7 15.3 18.3 15.1 18.0 15.0 17.7 14.8 17.5 14.7 17.2 14.7
75
6''mm o.c.
152 mm G' 2.4 1.8 3.0 2.2 3.5 2.6 4.0152 mm3.0 4.5 3.3 5.0 3.7 5.4 4.0
36'' 914 mm1-1/2'' 38 mm 914 mm 38 mm
SLSD 14.8 12.1 13.1 10.8 11.8 10.0 10.9 9.3 10.2 8.8 9.6 8.4 9.1 8.0
900 mm o.c.
G' 3.6 2.7 4.3 3.2 4.9 3.7 5.4 4.1 5.8 4.5 6.3 4.8 6.6 5.1
SLSD 16.4 13.6 14.9 12.5 13.7 11.7 12.9 11.1 12.2 10.6 11.7 10.3 11.3 10.0
600 mm o.c.
G' 3.7 2.7 4.4 3.2 5.0 3.7 5.6 4.2 6.1 4.6 6.5 5.0 6.9 5.3
SLSD 17.9 14.8 16.5 13.9 15.4 13.2 14.7 12.7 14.1 12.3 13.6 12.0 13.2 11.7
450 mm o.c.
G' 3.7 2.7 4.4 3.3 5.1 3.8 5.6 4.3 6.2 4.7 6.7 5.1 7.1 5.5
20
SLSD 20.4 16.9 19.3 16.2 18.4 15.7 17.8 15.3 17.3 15.0 16.9 14.8 16.6 14.6
36/9o.c.
300 mm 914/11 914/9
G' 3.7 2.7 4.5 3.3 5.2 3.9 5.8 4.4 6.4 4.8 6.9 5.3 7.5 5.7
SLSD 25.2 20.3 24.6 20.0 24.2 19.8 23.8 19.7 23.6 19.5 23.4 19.4 22.4 19.4
150
6''mm
152 o.c.
mm G' 3.8 2.8 4.6 3.4 5.3 4.0 6.1152 mm4.5 6.7 5.1 7.4 5.6 7.9 6.1
36'' 714 mm1-1/2'' 38 mm 914 mm 38 mm
SLSD 25.2 20.3 24.6 20.0 24.2 19.8 23.8 19.7 23.6 19.5 23.4 19.4 22.4 19.4
75 mm o.c.
G' 3.8 2.8 4.7 3.4 5.5 4.0 6.3 4.6 6.9 5.2 7.6 5.7 8.3 6.3
SLSD 17.9 14.6 15.9 13.2 14.4 12.1 13.3 11.3 12.4 10.7 11.8 10.2 11.2 9.8
900 mm o.c.
G' 6.7 5.0 7.8 5.8 8.5 6.6 9.3 7.2 9.8 7.7 10.2 8.1 10.5 8.5
SLSD 19.9 16.5 18.1 15.2 16.7 14.2 15.7 13.5 14.9 13.0 14.3 12.5 13.8 12.2
600 mm o.c.
G' 6.8 5.1 7.9 6.0 8.8 6.7 9.6 7.4 10.2 8.0 10.8 8.5 11.2 9.0
SLSD 21.7 18.0 20.0 16.9 18.8 16.1 17.9 15.5 17.2 15.0 16.6 14.6 16.1 14.3
450 36/11
mm o.c. 914/11
G' 6.8 5.1 8.0 6.1 9.0 6.9 9.9 7.6 10.6 8.3 11.2 8.9 11.8 9.4
18
SLSD 24.8 20.5 23.4 19.7 22.5 19.1 21.7 18.7 21.1 18.3 20.7 18.0 20.3 17.8
300
6''mm o.c. 152 mm
G' 7.0 5.2 8.2 6.2 9.3 7.1 10.3 7.9 11.1 8.7 11.9 9.4 12.5 10.0
36'' 1-1/2'' 714 mm 38 mm
SLSD 30.6 24.6 29.9 24.3 29.4 24.0 29.0 23.9 28.7 23.7 28.4 23.6 28.2 23.5
150 mm o.c.
G' 7.2 5.3 8.5 6.4 9.8 7.4 11.0 8.4 12.0 9.3 13.0 10.1 13.9 10.9
SLSD 30.6 24.6 29.9 24.3 29.4 24.0 29.0 23.9 28.7 23.7 28.4 23.6 28.2 23.5
75 mm o.c.
G' 7.4 5.4 8.8 6.6 10.2 7.7 11.5 8.7 12.7 9.7 13.7 10.6 14.7 11.5
SLSD 18.4 15.0 16.3 13.6 14.8 12.5 13.7 11.7 12.9 11.1 12.2 10.6 11.7 10.2
900 mm o.c.
G' 10.8 8.1 12.0 9.3 13.0 10.2 13.7 10.9 14.3 11.4 14.5 11.8 14.7 12.2
SLSD 20.5 16.9 18.6 15.7 17.3 14.8 16.3 14.1 15.5 13.5 14.9 13.1 14.4 12.7
600 mm o.c.
G' 11.0 8.3 12.5 9.6 13.5 10.6 14.5 11.5 15.2 12.1 15.6 12.7 16.1 13.2
SLSD 22.4 18.6 20.7 17.5 19.5 16.7 18.6 16.1 17.9 15.6 17.3 15.3 16.9 15.0
450 mm o.c.
G' 11.1 8.4 12.7 9.8 13.9 11.0 14.9 11.9 15.9 12.7 16.4 13.3 16.9 14.1
16
SLSD 25.5 21.1 24.2 20.3 23.3 19.8 22.6 19.4 22.0 19.0 21.6 18.7 21.2 18.5
300 mm o.c.
G' 11.4 8.6 13.2 10.1 14.5 11.4 15.9 12.5 16.9 13.5 17.9 14.4 18.5 15.2
SLSD 31.3 25.2 30.7 24.9 30.2 24.6 29.9 24.5 29.6 24.3 29.4 24.2 29.2 24.1
150 mm o.c.
G' 11.9 8.9 13.9 10.6 15.6 12.2 17.2 13.6 18.5 14.8 20.0 16.0 21.3 17.1
SLSD 31.3 25.2 30.7 24.9 30.2 24.6 29.9 24.5 29.6 24.3 29.4 24.2 29.2 24.1
75 mm o.c.
G' 12.3 9.3 14.5 11.1 16.7 12.8 18.5 14.3 20.0 15.9 21.7 17.2 23.3 18.5
1 Tabulated diaphragm shear values are for attachment of steel deck to a base steel thickness, tf 6 mm.
2 Tabulated LSD diaphragm shear loads are calculated with a phi factor () of 0.65 for wind loads. To calculate LSD values for load combinations involving
earthquake, divide values in table by 0.65 and multiply by a phi factor () of 0.60. Panel buckling has been checked.
3 Please refer to footnotes 4 through 8 at the end of Section 1.6 on page 60.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 41
Steel Deck Fastening Systems
Diaphragm Table 36-4 Limit States Design (LSD)-Factored Resistance Diaphragm Shear, q, (N/mm) and Flexibility Factor, F, (mm x 10-6/N)
w/X-ENP-19 L15 Metric for 38 mm deep steel nestable deck fastened with Hilti X-ENP-19 L15 with screwed sidelaps (Canada only)1, 2, 3
No. of transverse nails per 900 mm wide deck units=4 (every flute)
Sidelap Connection #12 screw at 600 mm O.C. #12 screw at 450 mm O.C. #12 screw at 300 mm O.C. #12 screw at 150 mm O.C.
Span (mm)
Deck gauge thickness 22 20 18 16 22 20 18 16 22 20 18 16 22 20 18 16
Strength, SLSD 5.1 6.1 8.0 10.0 5.1 6.1 8.0 10.0 6.7 8.1 10.7 13.4 8.8 10.7 14.0 17.5
1200
Flexibility Factor, F 582 372 200 123 582 372 200 123 573 364 193 117 565 357 187 111
Strength, SLSD 4.2 5.1 6.7 8.3 5.1 6.1 8.0 10.0 6.3 7.8 10.2 12.7 8.7 10.5 13.7 17.2
1500
Flexibility Factor, F 483 313 173 110 477 307 168 105 469 300 162 100 460 292 155 94
Strength, SLSD 4.3 5.2 6.8 8.6 4.9 6.0 7.9 9.9 6.1 7.4 9.8 12.2 8.6 10.3 13.5 16.9
1800
Flexibility Factor, F 413 270 151 98 407 265 147 94 400 258 141 89 390 249 134 82
Strength, SLSD 3.6 4.5 6.0 7.5 4.3 5.3 6.9 8.7 6.0 7.3 9.5 11.9 8.5 10.2 13.4 16.8
2100
Flexibility Factor, F 368 244 141 93 362 238 136 89 351 228 127 81 340 219 119 74
Strength, SLSD 3.9 4.7 6.2 7.8 4.5 5.4 7.1 8.8 5.9 7.1 9.3 11.6 8.3 10.1 13.3 16.7
2400
Flexibility Factor, F 329 220 128 86 324 215 124 82 314 206 116 75 303 196 107 67
Strength, SLSD 3.4 4.1 5.5 6.9 4.5 5.4 7.2 8.9 5.8 6.9 9.2 11.4 8.3 10.1 13.2 16.6
2700
Flexibility Factor, F 305 206 123 84 294 196 115 77 285 188 107 70 274 178 99 62
Strength, SLSD 3.6 4.3 5.8 7.3 4.1 4.9 6.5 8.1 5.6 6.8 8.9 11.3 8.2 10.0 13.2 16.5
3000
Flexibility Factor, F 280 190 115 79 275 186 111 76 262 174 101 67 251 164 92 59
Diaphragm Table 36-7 Limit States Design (LSD)-Factored Resistance Diaphragm Shear, q, (N/mm) and Flexibility Factor, F, (mm x 10-6/N)
w/X-ENP-19 L15 Metric for 38 mm deep steel deck fastened with Hilti X-ENP-19 L15 w/button punch sidelaps (Canada only)1, 2, 3
No. of transverse nails per 900 mm wide deck units=7 (every flute)
Sidelap Connection Button Punch 600 mm O.C. Button Punch 450 mm O.C. Button Punch 300 mm O.C. Button Punch 150 mm O.C.
Span (mm)
Deck gauge thickness 22 20 18 16 22 20 18 16 22 20 18 16 22 20 18 16
Strength, SLSD 6.1 7.5 10.1 12.9 6.1 7.5 10.1 12.9 6.9 8.6 11.9 15.6 8.2 10.5 15.0 20.4
1200
Flexibility Factor, F 113 82 54 40 113 82 54 40 112 81 53 40 110 79 52 38
Strength, SLSD 4.8 6.0 8.1 10.3 5.2 6.5 8.9 11.6 5.8 7.3 10.3 13.9 7.2 9.3 13.6 18.9
1500
Flexibility Factor, F 106 79 55 42 106 79 55 42 105 78 54 41 102 76 52 40
Strength, SLSD 4.2 5.3 7.3 9.6 4.6 5.6 8.0 10.7 5.1 6.5 9.3 12.7 6.6 8.6 12.8 17.9
1800
Flexibility Factor, F 103 79 57 45 103 79 56 44 101 77 55 43 98 75 53 41
Strength, SLSD 3.6 4.5 6.2 8.2 3.9 4.8 6.8 9.2 4.5 5.8 8.5 11.8 6.0 8.0 12.1 17.2
2100
Flexibility Factor, F 103 81 60 48 102 80 59 47 100 78 57 46 96 74 54 43
Strength, SLSD 3.3 4.2 5.9 7.9 3.5 4.5 6.3 8.7 4.1 5.3 7.9 11.0 5.6 7.5 11.5 16.6
2400
Flexibility Factor, F 104 83 62 51 103 82 62 50 101 80 60 49 95 75 56 45
Strength, SLSD 2.9 3.6 5.2 7.1 3.3 4.2 6.1 8.3 3.8 4.9 7.4 10.5 5.3 7.2 11.2 16.1
2700
Flexibility Factor, F 106 86 66 54 104 84 64 53 102 82 63 51 96 76 58 47
Strength, SLSD 2.8 3.5 5.1 6.9 2.9 3.8 5.4 7.5 3.5 4.7 7.1 10.0 5.1 6.9 10.8 15.6
3000
Flexibility Factor, F 108 89 69 57 107 88 68 57 104 84 65 54 96 78 59 49
1 The ratio of span of deck unit to average length of sheet is taken to be 1/3.
2 Diaphragm loads are based on steel decks having an average ultimate tensile strength of 55 ksi.
3 Values shown calculated in accordance with SDI equations using a factor of 0.5 for LSD for all load conditions.
Note: Reference pages 40-41 for generally higher diaphragm capacities with Hilti Sidelap Connectors (SLC).
42 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Diaphragm Table 24-5 Limit States Design (LSD)-Factored Resistance Diaphragm Shear, q, (N/mm) and Flexibility Factor, F, (mm x 10-6/N)
w/X-ENP-19 L15 Metric for 75 mm deep steel nestable deck fastened with Hilti X-ENP-19 L15 with screwed sidelaps (Canada only)1,2,3
No. of transverse nails per 600 mm wide deck units=5 (every flute)
Sidelap Connection #12 screw at 600 mm O.C. #12 screw at 450 mm O.C. #12 screw at 300 mm O.C. #12 screw at 150 mm O.C.
Span (mm)
Deck gauge thickness 22 20 18 16 22 20 18 16 22 20 18 16 22 20 18 16
Strength, SLSD 4.1 4.9 6.6 8.2 4.7 5.8 7.6 9.5 6.7 8.1 10.7 13.4 10.8 13.2 17.3 21.7
2400
Flexibility Factor, F 190 144 102 79 183 138 96 74 169 125 85 65 154 112 73 54
Strength, SLSD 3.6 4.5 5.8 7.3 4.8 5.9 7.6 9.6 6.6 7.9 10.5 13.2 10.7 12.9 17.0 21.5
2700
Flexibility Factor, F 188 145 105 83 174 132 93 73 161 121 84 64 145 106 71 53
Strength, SLSD 3.8 4.6 6.1 7.6 4.3 5.3 6.9 8.7 6.3 7.8 10.2 12.8 10.6 12.8 16.9 21.3
3000
Flexibility Factor, F 179 139 101 80 172 133 96 75 155 117 82 63 138 102 69 52
Strength, SLSD 3.4 4.2 5.5 6.9 4.5 5.3 7.1 8.8 6.2 7.6 10.0 12.6 10.5 12.7 16.8 21.0
3300
Flexibility Factor, F 179 141 104 84 165 129 93 74 150 114 81 63 132 99 67 51
Strength, SLSD 3.6 4.3 5.8 7.2 4.5 5.4 7.2 8.9 6.2 7.5 9.9 12.5 10.5 12.6 16.7 20.9
3600
Flexibility Factor, F 172 136 101 81 160 125 91 73 146 112 80 63 128 96 66 50
Strength, SLSD 3.3 4.0 5.3 6.7 4.1 5.1 6.6 8.3 6.1 7.4 9.8 12.2 10.3 12.6 16.6 20.8
3900
Flexibility Factor, F 173 138 104 84 160 127 94 75 142 110 79 62 124 93 65 49
Strength, SLSD 3.4 4.2 5.5 6.9 4.2 5.2 6.7 8.5 6.0 7.3 9.6 12.1 10.3 12.5 16.5 20.7
4200
Flexibility Factor, F 168 134 101 82 156 124 92 74 139 108 79 62 120 91 64 49
Diaphragm Table 24-5 Limit States Design (LSD)-Factored Resistance Diaphragm Shear, q, (N/mm) and Flexibility Factor, F, (mm x 10-6/N)
w/X-ENP-19 L15 Metric for 75 mm deep steel deck fastened with Hilti X-ENP-19 L15 w/button punch sidelaps (Canada only)1,2,3
No. of transverse nails per 600 mm wide deck units=5 (every flute)
Sidelap Connection Button Punch 600 mm O.C. Button Punch 450 mm O.C. Button Punch 300 mm O.C. Button Punch 150 mm O.C.
Span (mm)
Deck gauge thickness 22 20 18 16 22 20 18 16 22 20 18 16 22 20 18 16
Strength, SLSD 2.7 3.4 4.8 6.6 2.9 3.8 5.4 7.3 3.5 4.6 6.8 9.6 5.1 6.8 10.7 15.5
2400
Flexibility Factor, F 226 177 130 104 224 175 128 103 218 170 124 99 206 158 114 90
Strength, SLSD 2.5 3.1 4.3 5.9 2.8 3.5 5.2 7.2 3.3 4.2 6.5 9.3 4.8 6.6 10.5 15.2
2700
Flexibility Factor, F 228 182 136 111 224 177 133 108 217 172 128 103 203 158 116 93
Strength, SLSD 2.4 2.9 4.2 5.9 2.5 3.2 4.7 6.5 3.1 4.1 6.2 9.0 4.6 6.3 10.1 14.9
3000
Flexibility Factor, F 230 185 141 116 227 183 139 114 218 175 132 108 201 159 118 96
Strength, SLSD 2.1 2.7 3.9 5.3 2.4 3.1 4.6 6.5 2.9 3.9 6.0 8.8 4.5 6.2 10.0 14.7
3300
Flexibility Factor, F 235 192 148 123 230 187 144 119 220 178 137 112 201 160 121 99
Strength, SLSD 2.1 2.7 3.9 5.4 2.4 3.1 4.6 6.5 2.8 3.8 5.9 8.6 4.3 6.0 9.8 14.5
3600
Flexibility Factor, F 239 196 153 128 233 191 149 124 223 182 141 117 201 162 123 101
Strength, SLSD 1.9 2.5 3.6 5.1 2.1 2.8 4.2 6.0 2.7 3.6 5.8 8.3 4.2 5.9 9.6 14.2
3900
Flexibility Factor, F 246 204 161 135 239 198 156 131 226 186 146 121 201 164 126 104
Strength, SLSD 1.9 2.5 3.6 5.1 2.1 2.8 4.2 6.0 2.6 3.5 5.6 8.2 4.1 5.8 9.5 14.1
4200
Flexibility Factor, F 250 209 166 140 243 203 161 135 230 191 150 126 202 166 128 106
1 The ratio of span of deck unit to average length of sheet is taken to be 1/3.
2 Diaphragm loads are based on steel decks having an average ultimate tensile strength of 55 ksi.
3 Values shown calculated in accordance with SDI equations using a factor of 0.5 for LSD for all load conditions.
Note: Reference pages 40-41 for generally higher diaphragm capacities with Hilti Sidelap Connectors (SLC).
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 43
Steel Deck Fastening Systems
Accessories
Description Notes Qty
Replacement piston and brake
X 860-ENP Piston and Brake Spares Pack 1 pcs
for DX 860-ENP-L
DX 76 Decking System
Tools
Description Notes Qty
DX 76 Hand Held Decking Tool
Includes 10 fastener magazine 1 pcs
with MX76 Magazine
Accessories
Description Notes Qty
MX 76 Magazine Replacement magazine for DX 76-MX 1 pcs
Single fastener baseplate for
X-76-FN-15 1 pcs
DX 76
Replacement piston and stopper for
X-76-P-ENP Piston with stopper 1 pcs
DX 76
X-76-PS Piston Stopper Replacement stopper for DX 76 1 pcs
Fasteners (Non-Combo)
Description Base Steel Thickness Qty
X-ENP-19 L15 Fastener (singles) tf 1/4" (6 mm) 100 pcs
44 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
The SDT 5 Decking system can be Hilti S-MD 12-24 x 1-5/8 M HWH5
powered with either the ST 1800 Racing Tip steel deck fasteners
Adjustable Torque Screwdriver or the comply with ANSI/SDI RD1.0, C1.0
ST 1800-A18 Cordless Adjustable and NC1.0 standards.
Approvals/Listings
1.4.3 Technical Data
FM (Factory Mutual)
Allowable pullout loads for attachments to steel base material lb (kN)1,3,4 For attaching Class 1 Steel Roof Decks
with 1-60, 1-75 and 1-90 wind uplift
Base material thickness in. (Gauge)
Fastener ratings
0.0598 (16) 0.0747 (14) 0.1046 (12) 1/82 1/42
S-MD 12-24 x 1-5/8 M HWH5 215 (0.96) 265 (1.18) 370 (1.65) 505 (2.25) 505 (2.25)
UL (Underwriters Laboratories)
Fasteners for attaching steel roof deck
1 Unless otherwise noted, allowable load values based upon calculations done in accordance with (uplift and fire classification)
Section E4 of AISI S100 with Fu = 58 ksi.
2 Allowable load values based upon testing performed in ASTM A36 (Fu 58 ksi) plate steel.
3 Allowable tension pullout load values must be compared with allowable tension pullover load values.
Use lesser value.
4 Allowable load values based on safety factor of 3.0 per AISI S100.
Allowable tension pullover and shear bearing loads for attaching steel deck 1,2,3,4
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 45
6'' 6'' 152 mm
36'' 1-1/2'' 36'' 914 mm
1-1/2'' 38 mm
1 Tabulated diaphragm shear values are for attachment of steel deck to base steel thicknesses, tf , with the range 16 gauge (0.0598") tf 1/4".
2 Tabulated ASD diaphragm shear loads are calculated with a safety factor () of 2.35 for wind loads. To calculate ASD values for load combinations involving
earthquake, multiply values in table by 2.35 and divide by a safety factor () of 2.50. Panel buckling has been checked.
3 Please refer to footnotes 4 through 8 at the end of Section 1.6 on page 60.
46 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
6'' 152 mm
36'' 1-1/2'' 914 mm 38 mm
1 Tabulated diaphragm shear values are for attachment of steel deck to base steel thicknesses, tf , with the range 16 gauge (0.0598") tf 1/4".
2 Tabulated ASD diaphragm shear loads are calculated with a safety factor () of 2.35 for wind loads. To calculate ASD values for load combinations involving
earthquake, multiply values in table by 2.35 and divide by a safety factor () of 2.50. Panel buckling has been checked.
3 Please refer to footnotes 4 through 8 at the end of Section 1.6 on page 60.
36/11
6''
36'' 1-1/2''
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 47
6'' 6'' 152 mm
36'' 1-1/2'' 36'' 914 mm
1-1/2'' 38 mm
1 Tabulated diaphragm shear values are for attachment of steel deck to base steel thicknesses, tf , with the range 16 gauge (0.0598") tf 1/4".
2 Tabulated LRFD diaphragm shear loads are calculated with a phi factor () of 0.70 for wind loads. To calculate LRFD values for load combinations involving
earthquake, divide values in table by 0.70 and multiply by a phi factor () of 0.65. Panel buckling has been checked.
3 Please refer to footnotes 4 through 8 at the end of Section 1.6 on page 60.
48 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
6'' 152 mm
36'' 1-1/2'' 914 mm 38 mm
1 Tabulated diaphragm shear values are for attachment of steel deck to base steel thicknesses, tf , with the range 16 gauge (0.0598") tf 1/4".
2 Tabulated LRFD diaphragm shear loads are calculated with a phi factor () of 0.70 for wind loads. To calculate LRFD values for load combinations involving
earthquake, divide values in table by 0.70 and multiply by a phi factor () of 0.65. Panel buckling has been checked.
3 Please refer to footnotes 4 through 8 at the end of Section 1.6 on page 60.
36/11
6''
36'' 1-1/2''
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 49
6'' 152 mm
36'' 1-1/2''
914 mm 38 mm 914 mm 38 mm
1 Tabulated diaphragm shear values are for attachment of steel deck to base steel thicknesses, tf , with the range 16 gauge (1.5 mm) tf 6 mm.
2 Tabulated LSD diaphragm shear loads are calculated with a phi factor () of 0.65 for wind loads. To calculate LSD values for load combinations involving
earthquake, divide values in table by 0.65 and multiply by a phi factor () of 0.60. Panel buckling has been checked.
3 Please refer to footnotes 4 through 8 at the end of Section 1.6 on page 60.
50 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
152 mm
914 mm 38 mm
1 Tabulated diaphragm shear values are for attachment of steel deck to base steel thicknesses, tf , with the range 16 gauge (1.5 mm) tf 6 mm.
2 Tabulated LSD diaphragm shear loads are calculated with a phi factor () of 0.65 for wind loads. To calculate LSD values for load combinations involving
earthquake, divide values in table by 0.65 and multiply by a phi factor () of 0.60. Panel buckling has been checked.
3 Please refer to footnotes 4 through 8 at the end of Section 1.6 on page 60.
36/11 914/11
6'' 152 mm
36'' 1-1/2'' 714 mm 38 mm
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 51
Steel Deck Fastening Systems
* Additional tool and fastener packages available. Contact Hilti for more information.
Accessories
Description Notes Qty
For use with the SDT 5 Stand Up
SDT 5 Magazine 1
Decking Tool
For use with the SDT 5 or SDT 30
SDT Integrated Driver and Setter - 5/16" 1
Stand Up Decking Tools
52 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 53
Steel Deck Fastening Systems
54 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
* Please refer to footnotes listed at the end of this section on page 60.
Span = 4'-6''
Allowable Recommended Hilti powder-actuated frame fastener pattern-sidelap spacing Hilti SLC (in. o.c.)*
diaphragm design
strength, plf* X-ENP-19 with tf 1/4" X-HSN 24 with 3/16" tf 3/8" X-HSN 24 with 1/8" tf < 3/16"
SASD SASD
22 ga. 20 ga. 18 ga. 16 ga. 22 ga. 20 ga. 18 ga. 22 ga. 20 ga. 18 ga.
(seismic) (wind)
254 270 36/3-54 36/3-54 36/3-54 36/3-54 36/3-51 36/3-54 36/4-54 36/4-54 36/4-54 36/4-54
272 289 36/3-54 36/3-54 36/3-54 36/3-54 36/3-36 36/3-54 36/4-54 36/4-48 36/4-54 36/4-54
291 309 36/3-42 36/3-54 36/3-54 36/3-54 36/3-27 36/3-54 36/4-54 36/4-36 36/4-54 36/4-54
311 331 36/3-30 36/3-54 36/3-54 36/3-54 36/3-21 36/3-54 36/4-54 36/4-30 36/4-54 36/4-54
333 354 36/3-24 36/3-54 36/3-54 36/3-54 36/3-16 36/3-54 36/4-54 36/4-24 36/4-54 36/4-54
356 379 36/3-20 36/3-54 36/3-54 36/3-54 36/3-12 36/3-39 36/4-54 36/4-20 36/4-54 36/4-54
381 406 36/3-16 36/3-42 36/3-54 36/3-54 36/4-20 36/3-30 36/4-54 36/4-16 36/4-48 36/4-54
408 434 36/4-24 36/3-30 36/3-54 36/3-54 36/4-16 36/3-24 36/4-54 36/4-14 36/4-36 36/4-54
437 464 36/4-18 36/3-24 36/3-54 36/3-54 36/4-14 36/3-18 36/4-54 36/5-18 36/4-30 36/4-48
467 497 36/4-16 36/3-20 36/3-42 36/3-42 36/5-18 36/3-15 36/4-54 36/5-14 36/4-24 36/4-36
500 532 36/4-12 36/3-16 36/3-30 36/3-36 36/5-16 36/4-21 36/4-45 36/5-12 36/4-20 36/4-30
535 569 36/5-18 36/4-24 36/3-24 36/3-24 36/5-12 36/4-18 36/4-36 36/9-42 36/4-16 36/4-24
572 609 36/5-14 36/4-20 36/3-20 36/3-20 36/5-10 36/4-15 36/4-30 36/9-30 36/4-14 36/4-20
612 651 36/5-12 36/4-16 36/3-14 36/3-16 36/5-9 36/4-12 36/4-24 36/9-20 36/5-18 36/4-18
655 697 36/5-10 36/4-12 36/4-24 36/4-24 36/5-7 36/5-16 36/4-20 36/9-18 36/5-16 36/4-14
701 746 36/5-8 36/5-18 36/4-18 36/4-20 36/5-6 36/5-14 36/4-15 36/9-14 36/5-12 36/5-20
750 798 36/5-7 36/5-14 36/4-16 36/4-18 36/9-15 36/5-12 36/4-12 36/9-10 36/9-42 36/5-16
802 854 36/9-18 36/5-12 36/4-12 36/4-14 36/9-12 36/5-10 36/5-18 36/9-8 36/9-30 36/5-14
859 914 36/9-14 36/5-10 36/5-18 36/4-12 36/9-9 36/5-7 36/5-15 36/9-7 36/9-20 36/9-36
919 977 36/9-10 36/5-8 36/5-14 36/5-16 36/9-8 36/9-19 36/5-12 36/9-6 36/9-18 36/7-14
983 1046 36/9-8 36/5-7 36/5-12 36/5-12 36/9-6 36/9-16 36/5-10 36/11-7 36/9-14 36/7-12
1052 1119 36/9-7 36/9-18 36/5-10 36/5-10 36/9-5 36/9-12 36/5-8 36/11-6 36/9-12 36/9-18
1126 1197 36/9-6 36/9-14 36/5-8 36/5-8 36/11-6 36/9-10 36/5-6 36/9-8 36/9-14
1204 1281 36/9-5 36/9-10 36/5-7 36/5-7 36/9-3 36/9-8 36/9-15 36/9-8 36/9-12
1289 1371 36/11-6 36/9-8 36/9-16 36/9-18 36/9-3 36/9-7 36/9-12 36/9-6 36/9-10
1379 1467 36/11-5 36/9-7 36/9-12 36/9-14 36/11-3 36/9-6 36/9-9 36/11-8 36/9-8
1579 1679 36/11-3 36/9-5 36/9-8 36/9-10 36/11-6 36/9-7 36/11-8
1807 1923 36/11-5 36/9-6 36/9-6 36/11-4 36/11-7
2069 2201 36/11-3 36/11-6 36/11-6 36/11-5
2369 2520 36/11-4 36/11-4 36/11-3
* Please refer to footnotes listed at the end of this section on page 60.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 55
Steel Deck Fastening Systems
* Please refer to footnotes listed at the end of this section on page 60.
Span = 5'-6''
Allowable Recommended Hilti powder-actuated frame fastener pattern-sidelap spacing Hilti SLC (in. o.c.)*
diaphragm design
strength, plf* X-ENP-19 with tf 1/4" X-HSN 24 with 3/16" tf 3/8" X-HSN 24 with 1/8" tf < 3/16"
SASD SASD
22 ga. 20 ga. 18 ga. 16 ga. 22 ga. 20 ga. 18 ga. 22 ga. 20 ga. 18 ga.
(seismic) (wind)
222 236 36/3-66 36/3-66 36/3-66 36/3-66 36/3-57 36/3-66 36/4-66 36/4-60 36/4-66 36/4-66
237 253 36/3-66 36/3-66 36/3-66 36/3-66 36/3-42 36/3-66 36/4-66 36/4-48 36/4-66 36/4-66
254 270 36/3-48 36/3-66 36/3-66 36/3-66 36/3-33 36/3-66 36/4-66 36/4-42 36/4-66 36/4-66
272 289 36/3-42 36/3-66 36/3-66 36/3-66 36/3-27 36/3-66 36/4-66 36/4-30 36/4-66 36/4-66
291 309 36/3-30 36/3-66 36/3-66 36/3-66 36/3-21 36/3-63 36/4-66 36/4-24 36/4-66 36/4-66
311 331 36/3-24 36/3-60 36/3-66 36/3-66 36/3-18 36/3-48 36/4-66 36/4-24 36/4-60 36/4-66
333 354 36/3-20 36/3-48 36/3-66 36/3-66 36/3-15 36/3-39 36/4-66 36/4-20 36/4-48 36/4-66
356 379 36/3-18 36/3-42 36/3-66 36/3-66 36/3-12 36/3-30 36/4-66 36/4-16 36/4-42 36/4-60
381 406 36/3-14 36/3-30 36/3-60 36/3-66 36/4-16 36/3-24 36/4-66 36/4-14 36/4-36 36/4-48
408 434 36/4-18 36/3-24 36/3-48 36/3-48 36/4-14 36/3-21 36/4-66 36/5-18 36/4-30 36/4-42
437 464 36/4-16 36/3-20 36/3-36 36/3-42 36/4-12 36/3-15 36/4-51 36/5-16 36/4-24 36/4-36
467 497 36/4-14 36/3-18 36/3-30 36/3-36 36/5-15 36/4-21 36/4-42 36/5-12 36/4-20 36/4-30
500 532 36/4-12 36/4-24 36/3-24 36/3-24 36/5-12 36/4-18 36/4-33 36/9-30 36/4-18 36/4-24
535 569 36/4-10 36/4-20 36/3-20 36/3-20 36/5-10 36/4-16 36/4-27 36/9-24 36/4-14 36/4-20
572 609 36/5-12 36/4-16 36/3-16 36/3-18 36/5-9 36/4-12 36/4-24 36/9-20 36/5-18 36/4-18
612 651 36/5-10 36/4-14 36/3-14 36/4-24 36/5-8 36/4-11 36/4-18 36/9-16 36/5-16 36/4-16
655 697 36/5-8 36/4-12 36/4-20 36/4-20 36/5-6 36/4-9 36/4-15 36/9-12 36/5-14 36/5-20
701 746 36/5-7 36/4-10 36/4-16 36/4-18 36/9-12 36/5-12 36/5-21 36/9-10 36/5-12 36/5-16
750 798 36/9-14 36/5-12 36/4-14 36/4-14 36/9-10 36/5-10 36/4-12 36/9-8 36/9-24 36/5-14
802 854 36/9-12 36/5-10 36/4-12 36/4-12 36/9-9 36/5-9 36/5-15 36/9-8 36/9-20 36/5-12
859 914 36/9-10 36/5-8 36/4-10 36/5-16 36/9-8 36/5-7 36/5-12 36/9-6 36/9-16 36/9-24
919 977 36/9-8 36/5-8 36/5-12 36/5-14 36/9-6 36/5-6 36/5-11 36/11-7 36/9-14 36/9-20
983 1046 36/9-7 36/9-16 36/5-10 36/5-12 36/11-7 36/9-12 36/5-9 36/11-6 36/7-8 36/9-16
1052 1119 36/9-6 36/9-12 36/5-8 36/5-10 36/11-6 36/9-10 36/9-18 36/9-10 36/9-14
1126 1197 36/9-5 36/9-10 36/5-8 36/5-8 36/9-4 36/9-8 36/5-6 36/9-8 36/9-12
1204 1281 36/11-6 36/9-8 36/9-14 36/5-7 36/9-3 36/9-7 36/9-12 36/9-7 36/9-10
1379 1467 36/11-4 36/9-6 36/9-10 36/9-12 36/11-3 36/11-7 36/9-9 36/11-6 36/9-7
1579 1679 36/11-3Z 36/11-6 36/9-7 36/9-8 36/11-5 36/9-6 36/11-7
1807 1923 36/11-4 36/9-5 36/9-6 36/11-3 36/11-6
2069 2201 36/11-3 36/9-4 36/11-6 36/11-4
* Please refer to footnotes listed at the end of this section on page 60.
56 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
* Please refer to footnotes listed at the end of this section on page 60.
Span = 6'-6''
Allowable Recommended Hilti powder-actuated frame fastener pattern-sidelap spacing Hilti SLC (in. o.c.)*
diaphragm design
strength, plf* X-ENP-19 with tf 1/4" X-HSN 24 with 3/16" tf 3/8" X-HSN 24 with 1/8" tf < 3/16"
SASD SASD
22 ga. 20 ga. 18 ga. 16 ga. 22 ga. 20 ga. 18 ga. 22 ga. 20 ga. 18 ga.
(seismic) (wind)
194 206 36/3-72 36/3-72 36/3-72 36/3-72 36/3-69 36/3-72 36/4-72 36/4-60 36/4-72 36/4-72
207 221 36/3-72 36/3-72 36/3-72 36/3-72 36/3-51 36/3-72 36/4-72 36/4-48 36/4-72 36/4-72
222 236 36/3-60 36/3-72 36/3-72 36/3-72 36/3-42 36/3-72 36/4-72 36/4-48 36/4-72 36/4-72
237 253 36/3-48 36/3-72 36/3-72 36/3-72 36/3-33 36/3-72 36/4-72 36/4-36 36/4-72 36/4-72
254 270 36/3-36 36/3-72 36/3-72 36/3-72 36/3-27 36/3-72 36/4-72 36/4-30 36/4-72 36/4-72
272 289 36/3-30 36/3-72 36/3-72 36/3-72 36/3-24 36/3-57 36/4-72 36/4-24 36/4-72 36/4-72
291 309 36/3-24 36/3-60 36/3-72 36/3-72 36/3-18 36/3-48 36/4-72 36/4-24 36/4-60 36/4-72
311 331 36/3-20 36/3-48 36/3-72 36/3-72 36/3-16 36/3-39 36/4-72 36/4-20 36/4-48 36/4-72
333 354 36/3-18 36/3-36 36/3-72 36/3-72 36/4-21 36/3-30 36/4-72 36/4-18 36/4-42 36/4-60
356 379 36/3-16 36/3-30 36/3-60 36/3-60 36/4-18 36/3-27 36/4-72 36/4-16 36/4-30 36/4-48
381 406 36/4-20 36/3-24 36/3-48 36/3-48 36/4-15 36/3-21 36/4-57 36/5-18 36/4-30 36/4-42
408 434 36/4-16 36/3-24 36/3-36 36/3-42 36/4-12 36/3-18 36/4-48 36/5-16 36/4-24 36/4-36
437 464 36/4-14 36/3-20 36/3-30 36/3-36 36/4-11 36/3-15 36/4-39 36/5-14 36/4-20 36/4-30
467 497 36/5-18 36/3-16 36/3-24 36/3-30 36/4-9 36/3-12 36/4-33 36/5-12 36/4-18 36/4-24
500 532 36/5-14 36/4-20 36/3-20 36/3-24 36/5-12 36/4-16 36/4-27 36/9-20 36/4-16 36/4-24
535 569 36/5-12 36/4-18 36/3-18 36/3-20 36/5-9 36/4-15 36/4-24 36/9-18 36/4-14 36/4-20
572 609 36/4-8 36/4-14 36/3-16 36/3-16 36/5-8 36/4-12 36/4-21 36/9-14 36/4-12 36/4-18
612 651 36/5-10 36/5-18 36/4-20 36/3-14 36/5-7 36/5-15 36/4-18 36/9-12 36/5-14 36/4-14
655 697 36/5-8 36/5-16 36/4-18 36/4-18 36/5-6 36/5-12 36/4-15 36/9-10 36/5-12 36/5-18
701 746 36/5-7 36/5-14 36/4-14 36/4-16 36/9-10 36/5-11 36/4-12 36/7-7 36/7-14 36/5-16
750 798 36/9-12 36/5-12 36/5-18 36/4-14 36/9-9 36/5-9 36/5-15 36/9-8 36/9-18 36/5-14
802 854 36/9-10 36/5-10 36/5-16 36/4-12 36/9-8 36/9-16 36/4-9 36/9-7 36/9-16 36/5-12
859 914 36/9-8 36/5-8 36/5-12 36/5-14 36/9-7 36/5-7 36/5-12 36/9-6 36/9-14 36/7-14
919 977 36/9-8 36/5-7 36/5-12 36/5-12 36/9-6 36/5-6 36/5-9 36/11-7 36/9-12 36/7-12
983 1046 36/9-6 36/9-12 36/5-10 36/5-10 36/9-5 36/9-10 36/5-9 36/11-6 36/9-10 36/9-14
1052 1119 36/11-7 36/7-8 36/5-8 36/9-20 36/9-4 36/9-8 36/9-15 36/9-8 36/9-12
1204 1281 36/9-4 36/9-8 36/9-12 36/9-14 36/9-3 36/9-6 36/9-9 36/9-6 36/7-7
1379 1467 36/11-4 36/9-6 36/7-7 36/9-10 36/11-3 36/9-5 36/9-8 36/11-6 36/9-7
1579 1679 36/11-3 36/9-4 36/9-7 36/9-7 36/11-4 36/9-6 36/11-7
1807 1923 36/11-4 36/9-5 36/11-7 36/11-3 36/11-6
* Please refer to footnotes listed at the end of this section on page 60.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 57
Steel Deck Fastening Systems
* Please refer to footnotes listed at the end of this section on page 60.
Span = 7'-6''
Allowable Recommended Hilti powder-actuated frame fastener pattern-sidelap spacing Hilti SLC (in. o.c.)*
diaphragm design
strength, plf* X-ENP-19 with tf 1/4" X-HSN 24 with 3/16" tf 3/8" X-HSN 24 with 1/8" tf < 3/16"
SASD SASD
22 ga. 20 ga. 18 ga. 16 ga. 22 ga. 20 ga. 18 ga. 22 ga. 20 ga. 18 ga.
(seismic) (wind)
181 193 36/3-72 36/3-72 36/3-72 36/3-72 36/3-63 36/3-72 36/4-72 36/4-60 36/4-72 36/4-72
194 206 36/3-72 36/3-72 36/3-72 36/3-72 36/3-51 36/3-72 36/4-72 36/4-48 36/4-72 36/4-72
207 221 36/3-60 36/3-72 36/3-72 36/3-72 36/3-42 36/3-72 36/4-72 36/4-42 36/4-72 36/4-72
222 236 36/3-48 36/3-72 36/3-72 36/3-72 36/3-36 36/3-72 36/4-72 36/4-36 36/4-72 36/4-72
237 253 36/3-36 36/3-72 36/3-72 36/3-72 36/3-30 36/3-69 36/4-72 36/4-30 36/4-72 36/4-72
254 270 36/3-30 36/3-72 36/3-72 36/3-72 36/3-24 36/3-57 36/4-72 36/4-30 36/4-60 36/4-72
272 289 36/3-24 36/3-60 36/3-72 36/3-72 36/3-21 36/3-45 36/4-72 36/4-24 36/4-48 36/4-72
291 309 36/3-24 36/3-48 36/3-72 36/3-72 36/3-18 36/3-39 36/4-72 36/4-20 36/4-48 36/4-72
311 331 36/3-20 36/3-42 36/3-72 36/3-72 36/3-15 36/3-33 36/4-72 36/4-18 36/4-42 36/4-60
333 354 36/3-18 36/3-36 36/3-60 36/3-60 36/4-18 36/3-27 36/4-66 36/4-16 36/4-36 36/4-48
356 379 36/3-14 36/3-30 36/3-48 36/3-48 36/4-16 36/3-24 36/4-54 36/5-20 36/4-30 36/4-42
381 406 36/4-18 36/3-24 36/3-42 36/3-42 36/4-14 36/3-18 36/4-48 36/5-16 36/4-24 36/4-36
408 434 36/4-16 36/3-20 36/3-30 36/3-36 36/5-16 36/3-15 36/4-39 36/5-14 36/4-20 36/4-30
437 464 36/4-14 36/3-18 36/3-30 36/3-30 36/5-14 36/4-21 36/4-33 36/5-12 36/4-20 36/4-30
467 497 36/5-16 36/3-14 36/3-24 36/3-24 36/5-12 36/4-18 36/4-30 36/7-14 36/4-18 36/4-24
500 532 36/5-14 36/4-18 36/3-20 36/3-20 36/5-10 36/4-16 36/4-24 36/9-18 36/5-20 36/4-20
535 569 36/5-12 36/4-16 36/3-18 36/3-20 36/5-9 36/4-14 36/4-21 36/9-16 36/5-18 36/4-20
572 609 36/5-10 36/4-14 36/3-14 36/3-16 36/5-8 36/5-16 36/4-18 36/9-12 36/5-16 36/4-16
612 651 36/5-8 36/5-16 36/4-18 36/4-20 36/5-7 36/5-14 36/5-22 36/9-12 36/5-12 36/5-20
655 697 36/5-8 36/5-14 36/4-16 36/4-18 36/9-12 36/5-12 36/5-20 36/9-10 36/5-12 36/5-16
701 746 36/5-7 36/5-12 36/4-14 36/5-20 36/9-10 36/5-10 36/4-12 36/9-8 36/9-18 36/5-14
750 798 36/5-6 36/5-10 36/5-16 36/5-18 36/7-6 36/5-9 36/5-15 36/9-7 36/9-16 36/5-12
802 854 36/7-7 36/9-18 36/5-14 36/5-16 36/9-7 36/9-15 36/5-12 36/11-8 36/9-14 36/7-14
859 914 36/9-8 36/5-8 36/5-12 36/5-14 36/9-6 36/9-12 36/5-11 36/9-6 36/9-12 36/9-18
919 977 36/9-7 36/5-7 36/5-10 36/5-12 36/11-7 36/9-10 36/5-9 36/11-6 36/9-10 36/9-14
983 1046 36/9-6 36/5-6 36/9-18 36/5-10 36/9-5 36/7-7 36/9-15 36/7-7 36/7-10
1126 1197 36/11-6 36/9-8 36/5-7 36/9-14 36/9-3 36/9-7 36/5-6 36/9-7 36/9-10
1289 1371 36/11-8 36/9-10 36/7-8 36/7-4 36/9-9 36/11-6 36/9-7
1475 1570 36/9-5 36/9-7 36/9-8 36/9-4 36/9-6 36/11-7
1689 1797 36/11-7 36/9-6 36/9-5
* Please refer to footnotes listed at the end of this section on page 60.
58 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
* Please refer to footnotes listed at the end of this section on page 60.
Span = 9'-0''
Allowable Recommended Hilti powder-actuated frame fastener pattern-sidelap spacing Hilti SLC (in. o.c.)*
diaphragm design
strength, plf* X-ENP-19 with tf 1/4" X-HSN 24 with 3/16" tf 3/8" X-HSN 24 with 1/8" tf < 3/16"
SASD SASD
22 ga. 20 ga. 18 ga. 16 ga. 22 ga. 20 ga. 18 ga. 22 ga. 20 ga. 18 ga.
(seismic) (wind)
169 180 36/3-72 36/3-72 36/3-72 36/3-72 36/3-57 36/3-72 36/4-72 36/4-48 36/4-72 36/4-72
181 193 36/3-60 36/3-72 36/3-72 36/3-72 36/3-48 36/3-72 36/4-72 36/4-48 36/4-72 36/4-72
194 206 36/3-48 36/3-72 36/3-72 36/3-72 36/3-42 36/3-72 36/4-72 36/4-42 36/4-72 36/4-72
207 221 36/3-42 36/3-72 36/3-72 36/3-72 36/3-36 36/3-72 36/4-72 36/4-36 36/4-72 36/4-72
222 236 36/3-36 36/3-72 36/3-72 36/3-72 36/3-30 36/3-63 36/4-72 36/4-30 36/4-60 36/4-72
237 253 36/3-30 36/3-60 36/3-72 36/3-72 36/3-24 36/3-54 36/4-72 36/4-30 36/4-60 36/4-72
254 270 36/3-30 36/3-48 36/3-72 36/3-72 36/3-21 36/3-45 36/4-72 36/4-24 36/4-48 36/4-72
272 289 36/3-24 36/3-48 36/3-72 36/3-72 36/3-20 36/3-39 36/4-72 36/4-20 36/4-42 36/4-60
291 309 36/3-20 36/3-42 36/3-60 36/3-72 36/3-16 36/3-33 36/4-69 36/4-20 36/4-36 36/4-60
311 331 36/3-18 36/3-36 36/3-48 36/3-60 36/3-14 36/3-27 36/4-57 36/4-18 36/4-36 36/4-48
333 354 36/3-16 36/3-30 36/3-48 36/3-48 36/3-12 36/3-24 36/4-51 36/4-16 36/4-30 36/4-42
356 379 36/4-18 36/3-24 36/3-36 36/3-42 36/4-15 36/3-21 36/4-45 36/4-14 36/4-24 36/4-36
381 406 36/4-16 36/3-20 36/3-36 36/3-36 36/4-12 36/3-18 36/4-39 36/4-12 36/4-24 36/4-30
408 434 36/4-14 36/3-20 36/3-30 36/3-30 36/5-15 36/3-15 36/4-33 36/5-14 36/4-20 36/4-30
437 464 36/5-16 36/3-16 36/3-24 36/3-24 36/5-12 36/4-18 36/4-30 36/5-12 36/4-18 36/4-24
467 497 36/5-14 36/4-20 36/3-20 36/3-24 36/4-9 36/4-16 36/4-24 36/9-18 36/4-16 36/4-24
500 532 36/4-10 36/4-16 36/3-18 36/3-20 36/5-10 36/4-15 36/4-21 36/9-14 36/4-14 36/4-20
535 569 36/5-10 36/4-14 36/3-16 36/3-18 36/5-9 36/4-12 36/4-20 36/7-10 36/5-16 36/4-18
572 609 36/5-10 36/5-16 36/4-20 36/4-20 36/5-8 36/5-14 36/4-18 36/9-12 36/5-14 36/4-16
612 651 36/5-8 36/4-12 36/4-16 36/4-18 36/5-7 36/5-12 36/4-15 36/9-10 36/5-12 36/4-14
655 697 36/9-12 36/4-10 36/4-14 36/4-16 36/5-6 36/5-11 36/4-14 36/9-8 36/9-18 36/5-16
701 746 36/9-10 36/5-12 36/5-16 36/4-14 36/9-9 36/5-9 36/4-12 36/9-8 36/9-16 36/5-14
750 798 36/7-7 36/5-10 36/4-12 36/5-16 36/9-7 36/5-8 36/5-14 36/9-7 36/9-14 36/5-12
802 854 36/9-8 36/5-8 36/4-10 36/5-14 36/9-7 36/5-7 36/5-12 36/9-6 36/9-12 36/7-14
859 914 36/9-7 36/5-8 36/5-12 36/5-12 36/9-6 36/5-6 36/5-10 36/11-6 36/9-10 36/9-16
919 977 36/5-7 36/5-10 36/5-10 36/9-10 36/5-9 36/9-8 36/9-14
1052 1119 36/7-7 36/5-8 36/5-8 36/7-6 36/9-12 36/9-7 36/9-10
1204 1281 36/9-10 36/9-10 36/9-9 36/9-8
1379 1467 36/9-8 36/7-7 36/9-7 36/11-8
1579 1679 36/9-6 36/11-8 36/9-5 36/11-6
* Please refer to footnotes listed at the end of this section on page 60.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 59
Steel Deck Fastening Systems
1 SASD (seismic) values calculated by using a safety factor () of 2.50 for seismic loads. For SLRFD (seismic), multiply SASD (seismic) by 2.50 and then by a resistance factor ()
of 0.65. For SLSD (seismic), multiply SASD (seismic) by 2.50 and then by a resistance factor () of 0.60. Diaphragm shear stiffness should be calculated separately per
Section 1.1.8.
2 SASD (wind) values calculated by using a safety factor () of 2.35 for seismic loads. For SLRFD (wind), multiply SASD (wind) by 2.35 and then by a resistance factor () of
0.70. For SLSD (wind), multiply SASD (wind) by 2.35 and then by a resistance factor () of 0.65. Diaphragm shear stiffness should be calculated separately per
Section 1.1.8.
3 Tabulated fastening patterns apply to standard (Fy 33 ksi; Fu 45 ksi) or high strength (Fy 80 ksi; Fu 92 ksi) 1-1/2" deep, 6" center-to-center types B and BI
steel deck. Panel buckling has been checked.
4 At diaphragm perimeter, Hilti powder-actuated frame fasteners should be spaced at identical spacing as sidelap connectors.
5 Interpolation of diaphragm shear strength values is allowed between span dimensions, sidelap spacings and deck gauge. Alternatively, use calculations as
discussed in Section 1.1.8 to determine diaphragm shear capacities directly.
6 To convert from sidelap spacing (SS) to sidelaps per span (SPS), use the following formula: SPS=((span,ft) x 12)/(SS, in.). Round up to the next whole
sidelap connector.
7 For 16 gauge steel deck or for high tensile strength (Fu > 65 ksi) 18 gauge steel deck, use S-SLC 02 M HWH. For more information on Hilti Sidelap Connectors
refer to Section 1.5.
8 For diaphragm shear load values using Hilti #10 HWH screws, use the Hilti Profis DF Diaphragm software or contact Hilti at 877-749-6337 or deck@hilti.com.
9 Additional diaphragm fastening patterns and optimized attachment options can be developed from Hilti Profis DF Diaphragm Software. Contact Hilti Technical
Services or find more information at www.us.hilti.com/decking (USA) or www.hilti.ca/decking (Canada).
10 For 36/9 or 36/11 patterns, please see footnote 2 of Table 10 (page 19).
60 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
Product selection and performance in concrete over metal deck composite floor slabs3
Connector Minimum slab Maximum rib height, hr Nominal Allowable
X-HVB
height, Hs thickness, Ycon in. (mm) shear strength1, Qn shear strength2, q
connector
in. (mm) in. (mm) wr /hr 1.8 wr /hr < 1.8 lb (kN) lb (kN)
3-1/8 3-11/16 1-3/4 1-3/4 6294 3147
X-HVB80
(80) (93) (45) (45) (28.0) (14.0)
3-3/4 4-1/4 2-3/8 2-1/4
X-HVB95
(95) (108) (60) (57)
4-5/16 4-13/16 2-15/16 2-5/8
X-HVB110
(110) (123) (75) (66) 7868 3934
4-15/16 5-7/16 3-1/8 2-15/16 (35.0) (17.5)
X-HVB125
(125) (138) (80) (75)
5-1/2 6 3-1/8 3-1/8
X-HVB140
(140) (152) (80) (80)
1 Nominal shear strength to be used for designs per AISC-LRFD and unfactored shear resistance per AISC design formulas.
2 Allowable shear strength to be used for designs per AISC-ASD.
3 Tabulated load values based upon installation in base steel greater than or equal to 5/16".
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 61
Steel Deck Fastening Systems
The ductile performance of the Hilti X-HVB Shear Connector Beam deflections are computed by conventional elastic
allows distribution of the calculated required number of formulas. For beams with partial shear connection, deflections
X-HVBs uniformly between the points of zero and maximum may be estimated by using the following formula for the
moment. effective moment of inertia:
To obtain access to Hiltis BDES Composite Design Software, which designs and analyzes composite and
non-composite beams using Hilti X-HVB Shear Connectors under distributed and point loads in accordance
with AISC LRFD, contact Hilti Technical Support at 1-877-749-6337.
62 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Steel Deck Fastening Systems
= = 40
1-9/16" 40
1-9/16" = =
Wr 1-9/16" Wr 1-9/16"
3. With one X-HVB per rib, the leg may be either centered in 4. With two or three X-HVBs per rib, the legs may be either
the rib or positioned to give a 1-9/16" (40 mm) clearance to centered in the rib or alternated about the center.
the side of the rib.
2"
50 50
2" 5b. S
pacings along the ribs (other
100
4" 100
4" decking profiles)
5a. Spacing along the ribs (2" and 3" m = spacing of ribs 6. If the decking has a stiffener in the rib
U.S. composite floor deck profiles) bottom, position the X-HVBs against
the stiffener.
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014 63
PTG Decking Supplement 2013
Notes
64 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Direct Fastening Technical Guide 2014
Steel Deck Fastening Systems
DX 860-HSN
Powder actuated tool with a high fastening rate which can help significantly
reduce the time it takes to attach deck
No touch-up work required perfect for fastening painted or galvanized deck
surfaces
Magazine for 40 continuous fastenings up to 1000 fastenings per hour
Unique piston/brake system helps prevent the fastener from punching through
the deck
Fastenings can be made even on very thin supporting structures without the
need for weld washers
DX 460-SM
Fully automated hand-held tool for miscellaneous fastenings on steel thicknesses
of 3/16" and thicker, such as profile metal sheets on bar joists.
DX 860-ENP-L
Fully automatic tool fastens up to 1000 fastenings per hour
40-cartridge and 40-fastener capacity minimizes loading time and increases
productivity
Built-in, adjustable power regulator for optimal control in achieving reliable
fastenings
Cartridge and fastener magazine can be loaded from the top without having to
bend over
Use On Demand program to meet your project needs
DX 76
Power regulator for optimal control to achieve reliable fastenings across a broad
application range
Magazine fasteners and boosters help increase operating speed and reduce the
number of wasted fasteners
Fastener guide options allow for customizing the tool to the job
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I PTG Decking Supplement 2014
Hilti. Outperform. Outlast.
P.O. Box 21148, Tulsa, OK 74121 Hilti, Inc. (US) 1-800-879-8000 www.us.hilti.com Servicio al Cliente en espaol
1-800-879-5000 Hilti (Canada) Corporation 1-800-363-4458 www.hilti.ca Hilti is an equal opportunity employer
Hilti is a registered trademark of Hilti, Corp. Copyright 2014 by Hilti, Inc. H268 3445389 10/14 BB
The data contained in this literature was current as of the date of publication. Updates and changes may be made based on later testing. If verification is needed that the
data is still current, please contact the Hilti Technical Support Specialists at 1-800-879-8000. All published load values contained in this literature represent the results
of testing by Hilti or test organizations. Local base materials were used. Because of variations in materials, on-site testing is necessary to determine performance at any *ISO 14001 US Only
specific site. Laser beams represented by red lines in this publication. Printed in the United States