Professional Documents
Culture Documents
Changes
Changes
101
-------------------------------------
DSD+: Significant reduction in CPU usage when monitoring busy control channels.
Improvement will be most noticeable on low power processors.
DSD+: Detection and decoding of Hytera Extended Pseudo Trunk (XPT) systems.
DSD+: The DSD+ -i command line parameter can contain an IPV4 address;
this lets DSD+ connect to a copy of FMP that is running on a different
PC in your local network or on the Internet
If you edit a NEXEDGE alias, you must remove the asterisk; this tells
DSD+ that the new alias text is NOT auto-generated and DSD+ will not
replace it with OTA alias text
The FMP command line format has been modified and is now similar to
the DSD+ command line. A summary is listed here:
Usage:
FMP [options] Normal operation
FMP -h Show help
Options:
-i<num> RTL SDR device number (1-255) [-i1]
-o<num> Output audio device (1-255) [-o1]
-o<port> Output audio TCP port (256-65535)
-P<num> PPM value (-999.9-999.9) [-P0.0]
-g<num> RF gain (dB) [max]
-f<MHz> Initial tuned frequency [-f99.9]
-b<kHz> Initial filter bandwidth (4, 7, 9.5, 12.5) [-b7]
-z<num> Show zoomed spectrum (0-1) [-z1]
-e<num> Enable/disable economy mode (0-1) [-e1]
-n<num> Select noise filter (0-2) [-n0]
-v<num> Set volume level (0-500) [-v100]
-s<num> Enable/disable scanner mode (0-1) [-s0]
-wsl<v>.<h> Spectrum window location [-wsl50.50]
-_<num> Minimize windows at startup; bitmapped
-rv Role is trunk voice channel monitor
-rv puts FMP into voice following mode (same as pressing 'V' in FMP)
Any shortcuts or batch files that run FMP will have to be modified
to match the new command line format.
DSD+: Less processor loading (probably only noticeable on very slow processors)
DSD+: A command line option to add system details to event log entries has been
added
DSD+: Decoding of more DMR and TIII messages has been added
DSD+: Con+ handling has been modified; previous versions of DSD+ would create
"DMR" entries in the DSDPlus.groups and DSDPlus.radios files for traffic
on monitored voice channels; DSD+ 1.090 creates "Con+" entries; if you
have "DMR" entries with nonzero NID fields, you should either bulk delete
them or change their protocol string from "DMR" to "Con+"; Notepad has a
simple search/replace function that can be used to do this
DSD+: A command line option to minimize windows at startup has been added
value window
1 console
2 source audio
4 channel activity
8 event log
two bits are used per graphical window; pressing 'H' in a window will
cycle it to the next display mode; pressing 'W' displays the current
-H<num> value in the event log window
DSD+: Control of AMBE and IMBE unvoiced audio levels has been added
DSD+: DSD+ can get its raw audio source from FMP via a TCP link instead of
via Virtual Audio Cable or VB-Cable
linking FMP to DSD+ via VAC or VBC is deprecated; please use the TCP
link feature instead; any port number between 10000 and 65000 should be fine
DSD+: DSD+ can record separate .wav files for each voice call
time
duration
protocol
NID
site number
NAC/RAN/DCC/slot
call type (group/private)
target
source
FMP: A command line option to minimize windows at startup has been added
value window
1 console
2 spectrum display
--