This document provides information about Metrode Products Limited and their armour welding consumables Armet 1 and Supercore 20.9.3. These consumables deposit a modified austenitic stainless weld metal and have been used to fabricate military vehicles like the Challenger 2 main battle tank, AS-90 Howitzers, and Challenger Armoured Repair and Recovery Vehicles. Sizes ranging from 1.2mm to 8mm have been used for different applications. Armet 1 and Supercore 20.9.3 have approvals from the UK Ministry of Defence.
This document provides information about Metrode Products Limited and their armour welding consumables Armet 1 and Supercore 20.9.3. These consumables deposit a modified austenitic stainless weld metal and have been used to fabricate military vehicles like the Challenger 2 main battle tank, AS-90 Howitzers, and Challenger Armoured Repair and Recovery Vehicles. Sizes ranging from 1.2mm to 8mm have been used for different applications. Armet 1 and Supercore 20.9.3 have approvals from the UK Ministry of Defence.
This document provides information about Metrode Products Limited and their armour welding consumables Armet 1 and Supercore 20.9.3. These consumables deposit a modified austenitic stainless weld metal and have been used to fabricate military vehicles like the Challenger 2 main battle tank, AS-90 Howitzers, and Challenger Armoured Repair and Recovery Vehicles. Sizes ranging from 1.2mm to 8mm have been used for different applications. Armet 1 and Supercore 20.9.3 have approvals from the UK Ministry of Defence.
This document provides information about Metrode Products Limited and their armour welding consumables Armet 1 and Supercore 20.9.3. These consumables deposit a modified austenitic stainless weld metal and have been used to fabricate military vehicles like the Challenger 2 main battle tank, AS-90 Howitzers, and Challenger Armoured Repair and Recovery Vehicles. Sizes ranging from 1.2mm to 8mm have been used for different applications. Armet 1 and Supercore 20.9.3 have approvals from the UK Ministry of Defence.
Metrode Armet 1 and Supercore 20.9.3 Armour Welding Consumables
These consumables are well-established and approved for armour welding. They deposit a modified austenitic stainless weld metal with moderately high ferrite content, giving strong, tough and crack- resistant welds in many other hardenable steels, often without the need for preheat. Applications include tanks, other military and security vehicles, general engineering components. They are also useful for welding many wear and abrasion-resisting steels, to avoid the need for 'hydrogen control' procedures, particularly for heavier sections and the harder types. In addition, the high work-hardening rate gives these welds good resistance to impact wear and scuffing. This feature can also be exploited for overlays combined with corrosion and wet abrasion resistance. BAe Systems used Armet electrodes for during the fabrication of AS-90 Howitzers. Particular features Challenger identified 2 main werebattle tankexcellent positional welding and the good slag release. Sizes from 2.5mm up to 4.0mm Challenger 2 main battle tank were used but some 2.0mm was manufactured specifically for areas of difficult access and small attachments. Armet was also used on the CRARRVs, but in this case it was the larger 5 to 8mm sizes on sections up to 50mm.
The Challenger 2 contract was completed using
Supercore 20.9.3 flux cored wires in predominantly 1.6mm but 1.2mm was also used for thinner section. During the contract it was realised some positional welding was required and Metrode was able to The Challenger Armoured Repair and Recovery Vehicle (CRARRV) design and manufacture a 1.2mm P (positional) is a highly evolved armoured vehicle designed to recover and repair variant in a very short time period. damaged tanks on the battlefield.