Professional Documents
Culture Documents
Macrovista 2014-15 PPE Catalogue Online Version (SECURED)
Macrovista 2014-15 PPE Catalogue Online Version (SECURED)
PROTECTIVE
EQUIPMENT
Catalogue
2014/15
www.macrovista.com
Table Of Contents
Head, Eye & Face Protection P. 2 12
Safety Helmets
Safety Eyewear
Accessories
Hearing Protection P. 13 19
Ear Plugs
Ear Defenders
Attenuation Data
Hand Protection P. 20 36
General Purpose Impact Protection
Cut Resistant Specialty
Chemical
Protective Workwear P. 37 43
Fire Fighting
Chemical
Abrasion
Respiratory Protection P. 44 52
Single Use SCBA
Half Masks Gas Detectors
Full Face Masks
Fall Protection P. 53 94
Harnesses Anchorage Points
Self-Retracting Lifelines Lifelines
Lanyards Confined Space
Connectors Rescue & Evacuation
Note: All product specifications provided are correct at the time of printing according to manufacturers datasheets and/or brochures.
www.macrovista.com
Workplace Safety Solutions
www.macrovista.com
Workplace Safety Solutions
CE EN 397
NORTH A29R ANSI Z89.1 & CSA Z94.1
Type I Class E
A29R020000 White
A79RS2 Replacement Ratchet 4-point nylon suspension
A79C100 Chinstrap Elastic 2-point
CE EN 397
NORTH A69R ANSI Z89.1 & CSA Z94.1
Type I Class E
A69R020000 White
A69RS2 Replacement ratchet 6-point nylon suspension
A79C100 Chinstrap Elastic 2-point
CE EN 397
MSA V-GARD ANSI Z89.1 & CSA Z94.1
Type I Class E
GV112 White
88128 Chinstrap Elastic Polyester 2-point
www.macrovista.com
3
Workplace Safety Solutions
CE EN 397
CE EN 12492*
PETZL VERTEX BEST CE EN 50365
ANSI Z89.1 & CSA Z94.1
Type I Class E
FEATURES & BENEFITS
Six-point webbing suspension system conforms to the shape of the head for
improved comfort.
Shock absorption is achieved through deformation of the outer shell.
Unventilated shell protects against electrical hazards and molten metal splash.
Side slots for mounting of ear muffs.
Inserts for securing a VIZIR, VIZIR SHADOW or VIZEN mounted eyewear.
Front slot for mounting a PIXA or ULTRA VARIO headlamp.
CE EN 397
PETZL VERTEX VENT CE EN 12492
ANSI Z89.1 Type I Class C
CE EN 397
CE EN 12492
PETZL ALVEO VENT UIAA
ANSI Z89.1 Type I Class C
A20VWA White
A20VYA Yellow
A20VRA Red
4 www.macrovista.com
Workplace Safety Solutions
EN STANDARDS
SUSPENSIONS
EN 397 Specifies the physical and performance requirements of industrial safety Pin-lock
helmets. Optional requirements for molten metal splash, lateral Easy to adjust system of interlocking
deformation and use in low temperatures. teeth for a firm hold. Simply squeeze the
buckle tabs to loosen the band and slide
EN 812 Specification for industrial bump caps which are intended to provide
to tighten.
protection against bumps caused by walking into hazardous projections.
EN 1385 Specifies the requirements for helmets for canoeing and white water
sports for use in water.
Type II Helmets protect the wearer from top and lateral impact.
Class E (Electrical)
Helmets intended to reduce the danger of exposure to high-voltage electrical
conductors, proof-tested at 20,000 volts.
Class G (General)
Helmets intended to reduce the danger of exposure to low-voltage electrical PERSONALISATION
conductors, proof-tested at 2,200 volts. Pad Printing
High-definition pad printing gives the
Class C (Conductive) helmet a personalised look. The logo is
Helmets do not provide protection from electrical conductors. printed on the cap using a very durable
ink.
NFPA
*The maximum life cycle for safety helmets has been set at five years from the
manufacturing date
- Honeywell Safety Products
www.macrovista.com
5
Workplace Safety Solutions
CE EN 166 1BT8
PETZL VIZEN FACE SHIELD CE EN 170 2C-1,2
ANSI Z87.1
A14 Clear
CE EN 166 1B
PETZL VIZIR EYE SHIELD ANSI Z87.1
A15A Clear
HT-LF2-HDO
GATH GEDI
6 www.macrovista.com
Workplace Safety Solutions
CE EN 166 1F
KINGS ICARIA ANSI Z87.1
CE EN 166 1F
KINGS DIVISA ANSI Z87.1
CE EN 166 1F
KINGS VIVA ANSI Z87.1
CONTPSI Clear
CONTPSF Smoke
www.macrovista.com
7
Workplace Safety Solutions
9172.265 Clear
9172.220 Amber
9172.086 Grey
9160.265 Clear
9160.520 Amber
3M SOLUS CE EN 166 1F
71505-00002CP Clear
71505-00003CP Bronze
CE EN 166 1F
SPERIAN SC-1A ANSI Z87.1
100010 Clear
100011 Grey
8 www.macrovista.com
Workplace Safety Solutions
CE EN 166 1F
UVEX CYBRIGUARD AS/NZS 1337
9188.386 Polarised
CE EN 166 1F
UVEX CYBRIDUST AS/NZS 1337
9188.486 Polarised
CE EN 166 1B 349
UVEX ULTRASONIC CE EN 172
9302.245 Clear
9302.247 Orange
9301.906 Clear
www.macrovista.com
9
Workplace Safety Solutions
CE EN 166
UVEX ULTRAVISION FR 1B K N 349
9301.603 Clear
1002341 Browguard
1002353 Clear PC Visor
CE EN 166 1F
UVEX 9350 WELDING CE EN 169
CE EN 170
10 www.macrovista.com
Workplace Safety Solutions
EN STANDARDS
EN 169 Specification for filters used in eye protection for welding etc (braze-welding, arc gouging and plasma jet cutting)
www.macrovista.com
11
Workplace Safety Solutions
1011332 981803
9973.100
Plastic pump for
cleaning solution
9971.000
Refill pack of 700
sheets of silicone free
9970.002 cleaning tissues
9963.000
12 www.macrovista.com
Workplace Safety Solutions
Hearing Protection
www.macrovista.com
Workplace Safety Solutions
14 www.macrovista.com
Workplace Safety Solutions
www.macrovista.com
15
Workplace Safety Solutions
16 www.macrovista.com
Workplace Safety Solutions
3M OPTIME II H520
www.macrovista.com
17
Workplace Safety Solutions
EN STANDARDS
ATTENUATION DATA
SNR (Standard Noise Reduction) is a general means of comparing several earmuffs. Generally the higher the SNR rating,
the better performance of the earmuff accross the range of noise frequencies. The figures associated with H, M and L
indicate the level of protection within the range of High, Medium and Low frequency noise.
EARPLUGS
18 www.macrovista.com
Workplace Safety Solutions
EAR DEFENDERS
www.macrovista.com
19
Workplace Safety Solutions
Hand Protection
www.macrovista.com
Workplace Safety Solutions
3.1.3.1.
FEATURES & BENEFITS
Back-of-thumb serves as a convenient brow cloth.
Reinforced index finger and thumb saddle extends glove life.
Synthetic leather palm with silicone print for enhanced grip.
Elastic cuff with pull tab and Velcro closure for a secure fit.
Name tag on palm side of cuff.
Hi-vis color scheme for visual awareness.
Launderable.
Also comes in black, tan and pink.
Available in sizes 7/S to 11/XXL.
3.1.3.1.
FEATURES & BENEFITS
Back-of-thumb serves as a convenient brow cloth.
Reinforced index finger and thumb saddle extends glove life.
Synthetic leather palm with silicone print for enhanced grip.
SlipFit cuff with pull tab assists a quick on and off between tasks.
Name tag on palm side of cuff.
Hi-vis color scheme for visual awareness.
Launderable.
Available in sizes 7/S to 11/XXL.
2121
3.1.3.1.
FEATURES & BENEFITS
Ultra lightweight glove that outperforms cotton and nylon gloves.
The stretch knitted nylon liner, together with the specific formulation of the
polyurethane coating, offers flexibility and elasticity.
Designed to combine ultra-thinness with superior tear resistance for safety.
Polyurethane coating gives a good grip in dry conditions.
Suitable for handling micro-electronic and micro-mechanic components such as
small bearings, joints and springs.
Available in sizes 7 to 11.
11-600
www.macrovista.com
21
Workplace Safety Solutions
4.3.4.3.
FEATURES & BENEFITS
Provides comfort and dexterity.
Easy to wear during long working hours.
The special formulation of the polyurethane coating gives the gloves exibility
and t, as well as a secure grip on dry to slightly oily pieces for sure handling in a
wide range of environments.
The liner is made with a yarn structure containing Dyneema, the worlds
strongest ber.
Offers strong cut resistance for the safe handling and assembly of sharp pieces.
Available in sizes 7 to 11.
11-624
4.4.4.3.
FEATURES & BENEFITS
The glove offers high levels of cut resistance, for a safe use in controlling,
handling and assembly applications involving contacts with sharp pieces.
Lycra in the liners of both gloves, as well as the polyurethane coating, provides
excellent flexibility and fit.
The specific formulation of the polyurethane dipping provides a secure grip on
dry or slightly oily pieces.
PU formulation also increases abrasion resistance on the gloves work surface.
Available in sizes 7 to 11.
11-630
3.4.4.4. X.2.X.X.X.X.
80-602
22 www.macrovista.com
Workplace Safety Solutions
4.5.4.2.
FEATURES & BENEFITS
Water-based polyurethane glove with unmatched dexterity and high cut
protection.
Suitable for handling of sharp-edged objects, pre-assembling, cutting of small
dry or lightly oiled parts, maintenance, etc.
A seamless plaited glove for very good fit, dexterity and flexibility.
Excellent washability ensures prolonged lifetime.
Available in sizes 7 to 11.
11-435
4.5.2.1.
4032
2087
www.macrovista.com
23
Workplace Safety Solutions
74-030
10-302
10-306
24 www.macrovista.com
Workplace Safety Solutions
CE EN 374
CE EN 1149
ANSELL TOUCH N TUFF 92-600 FDA 21 CFR 177.2600 EN 374 EN 374 EN 1149
92-600
37-175
58-535
www.macrovista.com
25
LIQUID & CHEMICAL RESISTANCE
WITH IMPACT PROTECTION
CHEMICAL SERIES
www.macrovista.com
Workplace Safety Solutions
Pending Pending
7301
Pending Pending
7300
7200
www.macrovista.com
27
Workplace Safety Solutions
4.5.2.1.
4026
4.5.2.1.
4025
4036
28 www.macrovista.com
Workplace Safety Solutions
Pending
4004 Tan
4005 Black
4.5.4.4.
4021X
Pending
4010
www.macrovista.com
29
Distributed by
www.macrovista.com
Workplace Safety Solutions
Pending
FEATURES & BENEFITS
Full back of hand impact protection against bumps and tool slips.
Reinforced index finger and thumb saddle extends glove life.
Synthetic leather palm with reinforcements for ultimate comfort and abrasion
resistance.
Silicone printing on fingertips for added grip.
Neoprene cuff with name tag and Velcro closure.
Hi-vis color scheme for visual awareness.
Launderable.
Available in sizes 7/S to 11/XXL.
2130
4.2.4.3.
2021
Pending
2029
www.macrovista.com
31
Workplace Safety Solutions
4.5.3.2.
4024
CE EN 388 3.2.2.1.
ANSELL VIBRAGUARD CE EN 10819
EN 388
3.2.2.1.
FEATURES & BENEFITS
VibraGuard anti-vibration pad is designed with grooves which match the natural
contours of the hand - enhancing flexibility and reduces hand fatigue, thus
improving worker comfort and efficiency.
Offers premium protection at high frequencies combined with protection across
a broad spectrum of frequencies from 20Hz.
Reduces the risk of Hand-Arm Vibration Syndrome (HAVS).
Unique nitrile formulation offers outstanding resistance to cuts, punctures and
abrasion, and repelling grease and oil.
Available in sizes 8 to 11.
07-112
8173
32 www.macrovista.com
Workplace Safety Solutions
HWT8100
NFPA 1971
HONEYWELL FIRE MATE 9500 NFPA 1951
GL-9500
3.2.2.2. 4.1.3.2.X.X.
2281561
www.macrovista.com
33
Workplace Safety Solutions
GLOVE SIZING
Ensure that you wear the correct glove size everytime. Ill-fitted gloves can be uncomfortable, diminishes your
productivity and potentially put your life at risk.
Place your right hand on the glove chart so taht the saddle of your thumb and index finger line up with the X.
The measurement closet to the right edge of your hand will be the approximate glove size.
ALIGN INDEX FINGER
AL
IG
NT
HU
MB
34 www.macrovista.com
Workplace Safety Solutions
EN STANDARDS
This pictogram indicates that the user has to consult the instructions for use.
The pictogram with the breaker stands for gloves with low protection against chemical dangers and does not meet AQL
(Acceptable Quality Level for liquid penetration) index of two or lower.
Permeation is the measure of the molecular penetration of the safety glove material. The amount of time the chemical takes
to penetrate is specified in a protection index according to EN 374. The actual extent of protection in the workplace may vary
considerably from those given in the EN 374 index.
A glove is considered to be resistant to chemicals if it attains a protection index of at least Class 2 with three test chemicals.
Time of Permeation
Performance Level 0 1 2 3 4 5 6
Minutes < 10 > 10 > 30 > 60 > 120 > 240 > 480
www.macrovista.com
35
Workplace Safety Solutions
Manufacturer
Product
HexArmor Rig Lizard 2021 Reference
Glove Size
10/XL
EN 388
Mechanical norm Read
Instructions
Certification
Mechanical Marking
resistance 4243
36 www.macrovista.com
Workplace Safety Solutions
Protective Workwear
www.macrovista.com
Workplace Safety Solutions
NFPA 1997
MORNING PRIDE RANGER NFPA 2007
38 www.macrovista.com
Workplace Safety Solutions
CE EN 469
HONEYWELL Z-SERIES
Flashlight Clip
Standard on all firefighter suits Radio Pocket and Mic Tab
Standard on all firefighter suits
Underarm Bellow
Improved mobility of arms
Built-in Suspenders
Black elastic suspenders with
detachable front clips Nomex Delta T Option
Outer shell: Nomex Delta T
Thermal Liner: 50% meta-aramid/
Trouser Closure System 50% viscose woven fabric
Zipper under flap paired Moisture Barrier: Stedair 3000e
with hook and loop Colours: Navy Blue, Gold, Black
www.macrovista.com
39
Workplace Safety Solutions
TY 125 S WH (Non-hood)
TY 127 S WH (With hood)
CE EN 14605 Type 4
TRELLCHEM SPLASH 600 CE EN 1149-5
Splash 600
CE EN 943-1, 2/ET
TRELLCHEM SUPER CE EN 1073-2
CE EN 14126
40 www.macrovista.com
Workplace Safety Solutions
EU DIRECTIVE 89/686/EEC
Defines the requirements that must be met by Personal Protective Equipment in order to preserve the health and safety of users.
EN 943-1
Type 1 Gas-tight clothing
EN 942-2
www.macrovista.com
41
Workplace Safety Solutions
9904
9931
9919
42 www.macrovista.com
Workplace Safety Solutions
4.5.3.2.
AS019S
4.5.3.2.
400R6E
HD-300-0800
www.macrovista.com
43
Workplace Safety Solutions
Respiratory Protection
www.macrovista.com
Workplace Safety Solutions
NIOSH 42 CFR 84
HONEYWELL 801 N95 No. 84A-4006
BC1005584
NIOSH 42 CFR 84
HONEYWELL SUPERONE NBW95 No. 84A-4373
1015790
NIOSH 42 CFR 84
HONEYWELL SUPERONE NBW95V No. 84A-4378
1015791
www.macrovista.com
45
Workplace Safety Solutions
8835
46 www.macrovista.com
Workplace Safety Solutions
Check with our sales engineer for each filters NIOSH approval numbers.
CE EN 149
OPENGO ABEK1 P3 HOOD A1B1E1K1 P3
1728806
www.macrovista.com
47
MORNING PRIDE
BY HONEYWELL
HIGH PERFORMANCE
MOST
TRUSTED
GEAR Distributed by
Workplace Safety Solutions
SCBA855 T8000 EN with 6L Carbon Cylinder & Survivair 20/20 plus mask
SCBA859 T8000 EN with 9L Carbon Cylinder & Survivair 20/20 plus mask
888888 Cougar with 6L Aluminium Cylinder & Survivair 20/20 plus mask
www.macrovista.com
49
Workplace Safety Solutions
GASMAN
TETRA:3
GAS-PRO
50 www.macrovista.com
Workplace Safety Solutions
EN STANDARDS
DISPOSABLE MASKS
EN 149 Half mask respirators against particles
The European standard specifies the minimum requirements for half-mask respirators used as respiratory
protection against particles except for evacuation.
EN 405 Half mask respirators with valves against gases or combined gases and particles
The European standard specifies the performance requirements, testing and marking requirements and methods
applicable to half mask respirators equipped with valves and gas filters or combined filters used as respirators,
except for evacuation. It does not apply to anti-gas half-mask respirators without valves or with only exhalation
valves. It does not apply to equipment designed to be used in situations where there is or could be a lack of
oxygen (oxygen content lower than 17% by volume).
REUSABLE MASKS
EN 136 Full face masks
The European standard specifies the minimum requirements for full face respirators. The European standard
does not address full face masks designed for diving.
FILTERS
EN 143 Particulate filters
The European standard specifies particulate filters used as components of devices unassisted breathing, with the
exception of devices for the removal and filtering face pieces. Some filters complying with the European standard
can also be used with other types of respiratory protection, and in this case, they must be tested and marked in
accordance with the relevant European standard.
SCBA
EN 137 Self-contained open circuit compressed air BA with full face mask
The European standard specifies the minimum performance requirements for open circuit, compressed air SCBAs
with full face piece used as breathing equipment with the exception of devices designed for emergency
evacuation or diving. This equipment is intended to be used in work situations with a low risk of
over-pressurization of the compressed air cylinders and their taps due to hot environmental conditions.
CLASSES OF FILTER
!!!
USE A SELF-CONTAINED BREATHING APPRATUS IF
The oxygen concentration is less than 17%.
The concentration of contaminants is unknown or too high.
The filter is not suitable for contaminants present.
www.macrovista.com
51
Workplace Safety Solutions
In 1995, US National Institute for Occupational Safety and Health (NIOSH) has developed the set of regulations in 42 CFR 84 (also
referred to as Part 84) for testing and certifying nonpowered, air-purifying, particulate-filter respirators. The new Part 84 respirators
have passed a more demanding certification test than the old respirators.
SELECTION PROCESS
1. The selection of N-, R-, and P-series filters depends on the presence or absence of oil particles, as follows:
- If no oil particles are present in the work environment, use a filter of any series (i.e., N-, R-, or P-series).
- If oil particles (e.g., lubricants, cutting fluids, glycerine, etc.) are present, use an R- or P-series filter. Note: N-series filters
cannot be used if oil particles are present.
- If oil particles are present and the filter is to be used for more than one work shift, use only a P-series filter.
2. Selection of filter efficiency (i.e., 95%, 99%, or 99.97%) depends on how much filter leakage can be accepted. Higher filter efficiency
means lower filter leakage.
3. The choice of facepiece depends on the level of protection needed--that is, the assigned protection factor (APF) needed.
CLASSES OF FILTER
The Part 84 certification regulation provides for nine classes of filters (three levels of filter efficiency, with three categories of resistance
to filter efficiency degradation). The three levels of filter efficiency are 95%, 99%, and 99.97%. The three categories of resistance to filter
efficiency degradation are labeled N (Not resistant to oil), R (Resistant to oil), and P (oil Proof ). These new certification categories apply
only to non-powered, air-purifying, particulate-filter respirators. PAPRs for particulates will be approved only with high-efficiency filters.
PAPRs will not be approved with DM or DFM filters under Part 84. This rule also eliminates the combination categories of paint spray
and pesticide respirator approvals; however, other combination respirators (e.g., particulates and acid gases or organic vapours) will be
certified under Part 84.
52 www.macrovista.com
Workplace Safety Solutions
Fall Protection
www.macrovista.com
Workplace Safety Solutions
1011891
CE EN 361
MILLER TITAN 2-POINT WORK POSITIONING CE EN 358
1011894
1002850 Small
1002849 Medium/Large
1007611 Medium/Large with QCB
1007612 XLarge with QCB
54 www.macrovista.com
Workplace Safety Solutions
1002854 Small
1002853 Medium/Large
1004959 XLarge/XXLarge
1014236 Small/Medium
1014237 Large/XLarge
1014238 XXLarge
CE EN 361
MILLER ATEX ANTI-STATIC CE EN 13463-1, 5
ATEX 94/9/CE
1015074 Small/Medium
1015075 Large/XLarge
www.macrovista.com
55
Workplace Safety Solutions
1010040 Medium/Large
1010326 XLarge
1014257 Small/Medium
1014258 Large/XLarge
1014259 XXLarge
CE EN 361
MILLER ROPAX CE EN 358
CE EN 813
1015110 Small/Medium
1015111 Large/XLarge
56 www.macrovista.com
Workplace Safety Solutions
CE EN 361
PETZL AVAO BOD FAST CE EN 358
CE EN 813
C71AFA
CE EN 361
CE EN 358
PETZL AVAO BOD CROLL FAST CE EN 813
CE EN 12841 Type B
C71CFA
C73JF0
www.macrovista.com
57
Workplace Safety Solutions
ANCHORAGE DEVICES
Definition: Used to join the connecting device (work restraint, fall
arrester, shock absorbing lanyard, self-retracting lifeline) to the anchorage,
commonly referred to as the tie-off point (I-beam, scaffolding or other
structural point).
CONNECTING DEVICES
Definition: Used as intermediate attachment to connect the workers harness to the anchorage device (e.g. shock absorbing lanyard,
self-retracting lifeline, fall limiter, rope grab etc).
A. For Miller by Honeywell products made up mainly of textiles (harnesses, lanyards, webbing SRL3, anchorage slings)
The maximum life cycle has been set at ten years from the date of production. This, without environmental factors1 and particular cases
of use2 of the fall protection equipment. An annual inspection done by a competent person (trained for PPE inspections) is mandatory.
B. For Miller by Honeywell products made up mainly of metal (cable SRL, carabiners)
Miller by Honeywell does not indicate a life cycle; the latter can be unlimited, as the product undergoes regular maintenance (at least
once a year). In case of doubt or damage, the device has to be sent for expert inspection/repair to a local Miller by Honeywell Service
Centre or the Factory. For products not subject to maintenance (non-workable), the life cycle is a maximum of ten years1,2.
1 Environmental factors: contact with chemicals, improper storage, exposure to strong sources of heat > 50C, ultraviolet rays, abrasion, etc.
2 Particular cases of use: deterioration of the product, arresting falls, mechanical deformation, when accidental dropping, early wear, intensity of use and poor conditions of use. In
all cases, Miller by Honeywell products must be verified annually.
3 Except for Miller by Honeywell FALCON 6m webbing: Replacement of the webbing kit every 5 years from manufacturing date. Annual expert inspection by a Miller by Honeywell
Service Centre or the Factory is required.
Harness Type CE EN Standard Work Restraint Work Positioning Fall Arrest Rope Access Rescue
58 www.macrovista.com
>> 1 >> 2 >> 3
Hold harness by back D-ring. If chest, leg and/or waist straps Slip straps over shoulders so
Shake harness to allow all are buckled, release straps and D-ring is located in middle of
straps to fall in place. unbuckle at this time. back between shoulder blades.
Pull leg strap between legs and Connect chest strap and After all buckles have been
connect to opposite end. position in mid-chest area. connected, tighten all straps so
Repeat with second strap. Tighten to keep shoulder that the harness fits securely
If belted harness, connect straps taut. but allows movement. Secure
waist strap after leg straps. excess strap.
Distributed by
www.millerfallprotection.com
www.honeywellsafety.com
Workplace Safety Solutions
Part No. Cable Length Cable Type Snap Hook Weight (kg) Dimensions (mm)
1011728 6.2m Galvanised Steel Steel 4 255 x 213 x 101
1011742 10m Galvanised Steel Steel 5 255 x 213 x 101
1011746 15m Galvanised Steel Steel 6..7 255 x 213 x 101
1011750 20m Galvanised Steel Steel 7.6 255 x 213 x 101
1011729 6.2m Stainless Steel Steel 4 255 x 213 x 101
1011743 10m Stainless Steel Steel 5 255 x 213 x 101
1011747 15m Stainless Steel Steel 6.7 255 x 213 x 101
1011751 20m Stainless Steel Steel 7.6 255 x 213 x 101
1028680 6.2m Stainless Steel Stainless Steel 4 255 x 213 x 101
1028681 10m Stainless Steel Stainless Steel 5 255 x 213 x 101
1028682 15m Stainless Steel Stainless Steel 6.7 255 x 213 x 101
1028683 20m Stainless Steel Stainless Steel 7.6 255 x 213 x 101
60 www.macrovista.com
Workplace Safety Solutions
www.macrovista.com
61
Workplace Safety Solutions
CE EN 360
MILLER TURBOLITE ANSI A10.32
ANSI Z359-2007
CE EN 360
MILLER TWIN TURBO ANSI A10.32
ANSI Z359-2007
62 www.macrovista.com
Workplace Safety Solutions
This is the distance a person will fall when connected to a fall arrest attachment point. It is
related to the Fall Factors (see next page). Many situations can develop and it is ultimately the
responsibility of the worker to ensure that there is a suitable fall clearance available. In order
to calculate this, the worker must know the distances specified below, and it is also strongly
recommended they attend a locally approved working at height course or a Miller by Honeywell
certified safety at height training course.
VERTICAL CLEARANCE
The calculation below gives the minimum vertical clearance required between the
anchorage point of the lanyard and the lower level.
Absorption
Length of lanyard
+ Fully activated energy absorber
+ Body height from feet to harness attachment
+ Additional safety clearance
Using a 2m lanyard:
2m (lanyard length) + 1.75m (energy absorber) + 2m (body height) + 1m (safety)
= 6.75m
When the lifeline is not anchored vertically over the work place, the worker will pendulum in the
event of a fall and may be injured by hitting the ground or an obstacle to the side. If it is not
possible to use an anchorage point close to the work station, two anchorage points either side
of the worker can be used to prevent any swing.
www.macrovista.com
63
Workplace Safety Solutions
Anchorage point
FALL FACTOR 0
Length of
the connector
Anchorage is overhead and the lanyard is taut (lanyard)
between the anchorage point and the worker.
CLEARANCE
VERTICAL
The fall clearance is reduced as shown.
Height of
the person
CLEARANCE
FALL
Safety
distance
Anchorage point
CLEARANCE
the length of the lanyard before the energy
VERTICAL
absorber deploys to arrest the fall.
CLEARANCE
FALL
Height of
the person
Safety
distance
Anchorage point
FALL FACTOR 2 Length of
the connector
(lanyard)
Anchor point is at or below the feet of the
worker allowing a fall equivalent to twice Absorber
CLEARANCE
CLEARANCE
elongation
FALL
Safety
distance
64 www.macrovista.com
Workplace Safety Solutions
CE EN 355
KINGS ROPE SS528
CE EN 355
MILLER ATEX CE EN 13463-1, 5
www.macrovista.com
65
Workplace Safety Solutions
66 www.macrovista.com
Workplace Safety Solutions
CE EN 358
MILLER HANDZUP CE EN 795B
CE EN 358
PETZL GRILLON CE EN 795B
www.macrovista.com
67
Workplace Safety Solutions
68 www.macrovista.com
Workplace Safety Solutions
1002897 1m 1003179 3m
1003178 2m
www.macrovista.com
69
Workplace Safety Solutions
1007066
ANSI A10.32
MILLER BEAM TROLLEY ANSI Z359.1
NOTE:
ALL ANCHORAGES ARE FOR SINGLE USER ONLY UNLESS OTHERWISE STATED
CE EN 795A
SOLL EYE ANCHORAGES CE EN 50308
1031581
70 www.macrovista.com
Workplace Safety Solutions
23876 SOLL RAP Swivel Eye Bolt 23952 Stainless Steel Anchor 200mm
23875 Stainless Steel Anchor 100mm 23953 Stainless Steel Anchor 250mm
23951 Stainless Steel Anchor 125mm
BS-OESE Check with our sales engineer on the various options available.
CE EN 765A anchorages should be installed by a competent engineer or approved Miller by Honeywell installer in accordance with
approved national standards, and inspected at least once every 12 months (6 months if used for work positioning or suspension).
www.macrovista.com
71
Workplace Safety Solutions
CE EN 1891
MILLER ANCHORAGE LINE Type A
1007610
1011160
72 www.macrovista.com
Workplace Safety Solutions
B71AAA
B71ALU
L71AA 20 20cm
L71AA 40 40cm
www.macrovista.com
73
Workplace Safety Solutions
74 www.macrovista.com
Workplace Safety Solutions
CE EN 353-1
SOLL GLIDELOC ANSI A14.3-08
CSA Z259.2.1-98
5 Folding Footrest
5 7 Twin Ladder
www.macrovista.com
75
Workplace Safety Solutions
CE EN 353-1
SOLL PIVOTLOC ANSI A14.3-08
CSA Z259.2.1-98
Opened Closed
76 www.macrovista.com
Workplace Safety Solutions
CE EN 353-1
GLIDELOC COMFORT ANSI A14.3-08
CSA Z259.2.1-98
22967
CE EN 353-1
GLIDELOC COMFORT2 ANSI A14.3-08
CSA Z259.2.1-98
23331
23109
CE EN 353-1
GLIDELOC UNIVERSAL II ANSI A14.3-08
CSA Z259.2.1-98
23531
www.macrovista.com
77
Workplace Safety Solutions
CE EN 353-1
ANSI A14.3
SOLL VI-GO CSA Z259.2.1-98
OSHA 1926.502
OSHA 1910.27
FEATURES & BENEFITS
Cable guided vertical fall protection system using friction based arrester.
Can be retrofitted onto existing ladders or rungs used in wind turbine towers, power transmission towers, telecommunication
repeaters etc.
Easy to handle, move, store and install. 4
Components available in galvanised or stainless steel.
Supports up to 8 users per system. 7
Able to withstand dynamic load of 6kN plus 1kN for each additional user subject to structure.
CE EN 353-1
ANSI A14.3
SOLL VI-GO SHUTTLE CSA Z259.2.1-98
OSHA 1926.502
OSHA 1910.27
FEATURES & BENEFITS
Easy, one-hand operation for attachment/detachment of shuttle from the
system.
Double action to unhook shuttle from system for added safety.
Shuttle comes with integrated triple action carabiner and fall indicator.
Built-in shock absorber reduces fall force to under 6kN.
Fail safe prevents shuttle from travelling in opposite direction.
Made from corrosion resistant stainless steel and aluminium for longer lifespan.
Available in triple action carabiner with swivel.
Use of non-certified or unapproved shuttle will immediately void the validity of
the systems CE certification.
78 www.macrovista.com
Workplace Safety Solutions
www.macrovista.com
79
Workplace Safety Solutions
CE EN 795:2012 Type D
SOLL MULTIRAIL CEN/TS 16415:2013
5
5
1
1
7
6
4
7
2
3
4
4
80 www.macrovista.com
Workplace Safety Solutions
CE EN 795:2012 Type D
MULTIRAIL CLOSED RUNNER CEN/TS 16415:2013
1013517
CE EN 795:2012 Type D
MULTIRAIL OPENABLE RUNNER CEN/TS 16415:2013
1013518
CE EN 795:2012 Type D
MULTIRAIL LOCKABLE RUNNER CEN/TS 16415:2013
1032550
CE EN 795:2012 Type D
MULTIRAIL OVERHEAD RUNNER CEN/TS 16415:2013
1014601
www.macrovista.com
81
Workplace Safety Solutions
CE EN 795:2012 Type D
SOLL GUIDELOC CEN/TS 16415:2013
1 GuideLoc Rail
2 Rail Connector
3 Flexible End-stop
4 1
4 Rigid End-stop
8 5 Remote End-stop
3
6 Trolley
6
7 Mounting Bracket
2 8 EN 355 Lanyard
8 1
CE EN 795:2012 Type D
GUIDELOC TROLLEY CEN/TS 16415:2013
15620
82 www.macrovista.com
Workplace Safety Solutions
CE EN 795:2012
ANSI A10.32-2004
SOLL XENON OSHA
3 Intermediate Brackets
2 Shuttle
1 Shock Absorber/Tensioner
Swage
Universal
Standard Overhead
Swageless
Bendable 45
Eyebolt Overhead
www.macrovista.com
83
Workplace Safety Solutions
1005041
ANSI
MILLER DURAHOIST OSHA
DH-1
84 www.macrovista.com
Workplace Safety Solutions
MILLER PULLEY
1011471
www.macrovista.com
85
Workplace Safety Solutions
CE EN 341
CE EN 1496B
MILLER SAFESCAPE ELITE ANSI Z359.4
OSHA
CE EN 60068
MILLER SAFESCAPE ELITE CASE IP67 / MIL-C-4150-J
ATA-300 and DEF-STAN 81-41
86 www.macrovista.com
Workplace Safety Solutions
CE EN 341
CE EN 1496B
MILLER SAFESCAPE ELITE RESCUE KIT ANSI Z359.4
OSHA
CE EN 341, CE EN 1496B
ANSI Z359.4, OSHA
MILLER SAFESCAPE ELITE CASE KIT CE EN 60068
IP67 / MIL-C-4150-J
ATA-300 and DEF-STAN 81-41
FEATURES & BENEFITS
Rescue equipment can be safely stored for up to ten years without the need for
costly inspection.
1 x Miller humidity-resistant storage case.
1 x Miller SafEscape ELITE with handwheel and ladder adapter, fitted with 90m
rope.
1 x Red rescue carrying bag.
3 x Webbing anchorage slings 1.2 m.
1 x Rope grab.
3 x Carabiners.
1 x Pulley.
1 x Edge protector.
1 x T-bar.
ANSI A10.32
ANSI Z359.4
MILLER QUICKPICK PREMIUM KIT OSHA 1926
OSHA 1910.66
www.macrovista.com
87
Workplace Safety Solutions
CE EN 567
PETZL PRO TRAXION PULLEY NFPA 1983
P51A
P53
88 www.macrovista.com
Workplace Safety Solutions
CE EN 567
PETZL ASCENSION CE EN 12841 Type B
NFPA 1983
1004254
CE EN 567
PETZL CROLL CE EN 12841 Type B
B16BAA
www.macrovista.com
89
Workplace Safety Solutions
CE EN 341 Class A
MILLER INDY DESCENDER CE EN 12841 Type C
1032022
1007057
CE EN 341 Class A
PETZL ID S ASCENDER CE EN 12841 Type C
NFPA 1983
D200S0
PETZL FOOTAPE
C47A
90 www.macrovista.com
WORK AT HEIGHT
TRAINING RIGHT AT
YOUR DOOR STEP
Brought to you by
MACROVISTA PROVIDES THE FOLLOWING TRAINING:
WORKING AT HEIGHT PPE INSPECTION COURSE
ADVANCE WORKING AT HEIGHT COURSE* In conjunction with
1007046
PETZL NEST
S61
A0120
1007063
92 www.macrovista.com
Workplace Safety Solutions
1014591
www.macrovista.com
93
Workplace Safety Solutions
EN STANDARDS
EN 341 Specification for descenders.
EN 353-1 Standard for guided type fall arresters (on a rail).
EN 353-2 Standard for guided type fall arresters (on a rope/cable).
EN 354 Specification for lanyards.
EN 355 Specification for shock absorbers.
EN 358 Specification for belts for work positioning and restraint and work positioning lanyards.
EN 360 Specification for retractable type fall arresters.
EN 361 Standard for full body harnesses.
EN 362 Specification for connectors as connecting elements in the individual protection systems.
Class A Anchorage connectors
Class B Basic connectors
Class M Multi-use connectors
Class Q Screwlink connectors (quick links)
Class T Termination connectors
EN 363 Specification for fall arrest systems.
EN 566 Specification for mountaineering equipment: slings.
EN 795 Standard for anchor devices supplemented by CEN TS 16415 technical specification.
Class A1 Structural anchors for fixing to vertical, horizontal and inclined
Class A2 Structural anchors for mounting on sloped roofs
Class B Temporary anchors
Class C Horizontal flexible cable system
Class D Horizontal rigid rail system
Class E Dead weight anchors
EN 813 Specification for sit harness.
EN 1496 Specification for rescue lifting devices.
EN 1891 Specification for low stretch kernmantel ropes.
Class A Ropes designed for general use
Class B Ropes with lower performance than the previous class and will require greater care when using
EN 12841 Specification for rope access systems, control devices.
Class A Safety line adjustment device
Class B Working line ascender
Class C Working line descender
ANSI STANDARDS
ANSI Z359.1 American National Standard Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components was
published to address the variety of equipment being developed in the rapidly growing field of Fall Protection.
This Standard applied to fall arrest equipment used in General Industry and non-construction occupations. The Construction Industry
has its own set of Standards (ANSI A10.32-2004).
ANSI Z359.0 - 2007 Definitions and Nomenclature Used for Fall Protection and Fall Arrest.
ANSI Z359.1 - 2007 Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components.
ANSI Z359.2 - 2007 Minimum Requirements for a Comprehensive Managed Fall Protection Program.
ANSI Z359.3 - 2007 Safety Requirements for Positioning and Travel Restraint Systems.
ANSI Z359.4 - 2007 Safety Requirements for Assisted Rescue and Self-Rescue Systems, Subsystems and Components.
ANSI Z359.6 - 2009 Specifications and Design Requirements for Active Fall Protection Systems.
ANSI Z359.12 - 2009 Connecting Components for Personal Fall Arrest Systems.
ANSI Z359.13 - 2009 Personal Energy Absorbers and Energy Absorbing Lanyards.
ANSI Z359.7 - 2011 Qualification and Verification Testing of Fall Protection Products.
ANSI Z359.14 - 2012 Safety Requirements for Self-Retracting Devices for Personal Fall Arrest and Rescue Systems.
94 www.macrovista.com
Workplace Safety Solutions
Safety Footwear
www.macrovista.com
Workplace Safety Solutions
EN ISO 20345 S3
ASTM F2413-05
KINGS KWS800 AS/NZ 2210.3
SS513
KWS800
EN ISO 20345 S3
ASTM F2413-05
KINGS KWD807 AS/NZ 2210.3
SS513
KWD807
EN ISO 20345 S2
ASTM F2413-05
KINGS KL331X AS/NZ 2210.3
SS513
KL331X
EN ISO 20345 S2
ASTM F2413-05
KINGS KL221X AS/NZ 2210.3
SS513
KL221X
96 www.macrovista.com
Workplace Safety Solutions
EN ISO 20345 S3
ASTM F2413-05
KINGS KWD806 AS/NZ 2210.3
SS513
KWD806
EN ISO 20345 S2
ASTM F2413-05
KINGS KWD901 AS/NZ 2210.3
SS513
KWD901 Black
KWD901K Brown
EN ISO 20345 S3
KINGS KWD706 ASTM F2413-05
AS/NZ 2210.3
SS513
FEATURES & BENEFITS
Ankle height elastic slip on boot made from black grain leather.
Comes with steel midsole, 200J steel toecap and dual density anti-static PU
outsole.
Protects against most acids and chemicals.
Scuff cap for toe bumper protection.
Available in sizes UK 4 to 13 (EUR 37 to 48).
KWD706
www.macrovista.com
97
Workplace Safety Solutions
EN ISO 20345 S3
ASTM F2413-05
STEEL BLUE ARGYLE AS/NZ 2210.3
SS513
392102
EN ISO 20345 S2
ASTM F2413-05
STEEL BLUE ARGYLE ZIP AS/NZ 2210.3
SS513
312152
EN ISO 20345 S3
ASTM F2413-05
STEEL BLUE ARGYLE MET AS/NZ 2210.3
SS513
382802
98 www.macrovista.com
Workplace Safety Solutions
EN ISO 20345 S3
ASTM F2413-05
HOWLER CANYON AS/NZ 2210.3
SS513
492454
EN ISO 20345 S3
ASTM F2413-05
HOWLER CANYON ZIP AS/NZ 2210.3
SS513
492494
EN ISO 20345 S3
ASTM F2413-05
HOWLER KOKODA AS/NZ 2210.3
SS513
492452
www.macrovista.com
99
Workplace Safety Solutions
EN ISO 20345 S3
ASTM F2413-05
STEEL BLUE HOBART AS/NZ 2210.3
SS513
392101
EN ISO 20345 S2
ASTM F2413-05
STEEL BLUE TINDAL AS/NZ 2210.3
SS513
617561
EN ISO 20345 S3
ASTM F2413-05
HOWLER SIMPSON AS/NZ 2210.3
SS513
492453
100 www.macrovista.com
Workplace Safety Solutions
EN ISO 20345 S2
ASTM F2413-05
STEEL BLUE HEELER AS/NZ 2210.3
SS513
322315
EN ISO 20345 S3
ASTM F2413-05
HOWLER EVEREST AS/NZ 2210.3
SS513
492451
EN ISO 20345 S3
KINGS KWD805 ASTM F2413-05
AS/NZ 2210.3
SS513
FEATURES & BENEFITS
Full grain black leather pull on boot.
Comes with steel midsole, steel toecap and dual density anti-static PU outsole.
Protects against most acids and chemicals.
Scuff cap for toe bumper protection.
Softer midsole to cushion shock impact.
KWD805 Black
KWD805C Brown
www.macrovista.com
101
Workplace Safety Solutions
EN ISO 20345
DUNLOP PUROFORT S5 CI SRA
C462933
KV20 Black
KV20Y Yellow
NFPA 1971
HONEYWELL 1500 NFPA 1992
Model 1500
NFPA 1971
HONEYWELL 1600 NFPA 1992
Model 1600
102 www.macrovista.com
Workplace Safety Solutions
EN STANDARDS
EN ISO 20345 Basic requirements for safety footwear, oil resistant outsole and must have a 200 Joules toe cap.
P Penetration resistance
C Conductive
A Anti-static
HI Insulating against heat
CI Insulating against cold
E Energy absorbing seat region
WRU Uppers resistant to water penetration/absorption
HRO Outsole resistant to hot contact
Classification I - Made from leather and other materials, but not all-rubber or all polymeric types
SRA Slipping resistance on ceramic tile wet with dilute soap solution
SRB Slipping resistance on smooth steel with glycerol
SRC SRA + SRB
UK 3 4 5 6 7 8 9 10 11 12 13
EUR 36 37 38 39 40/41 42 43 44 45/46 47 48
US 4 5 6 7 8 9 10 11 12 13 14
www.macrovista.com
103