WOODCO
USA
CLICK HERE TO LEARN
MORE ABOUT:
To request
a quote
orask
aauestion
Contact
WOODCO USA
See Catalog et uot [Search|
Look to Click HeretoGo Home ag The Source.’
ABOUT FLANGES Revised: 11/07/2013
| Previous flange | Nexttlange ff Elance index J Weld Neck Dimensions
FLANGE REFERENCE
15-516" |FLANGE SIZE (NOMINAL) STANDARD
SLIDE ou (wax SERVICE PRESSURE RATING
R-57 |STANDARD RING NUMBER: 0 ioaes
RULE X57 [PRESSURE ENERGIZED RING NUMBER
12" 900 SERIES (OLD API DESIGNATION)
MAKE UP TORQUE FOR
B7/L7 BOLTING USING.
[18-15/92"] API RP 5A2/ ISO 13678
al
=a io
croore woth 133E} | | a
sore er
wn (ET
| SiR
mweren |
kewem |
Le Raeorcs) tape suns
an Moswo sorts
snonar gee ne Ds
TEBE ena 3 ane rae
. 7/8" - QUNC THDS.
wen or roves sine
1-1/2" /BOLT HOLE Size
21" port cincte_—+|
ww
RAISED FACE, If PRESENT, SHALLNOT EXCEED THE DEPTH OF THE RING GROOVE,
@z2011.woooce usa
STUD ANO GOUT DNKENSIONS DERWED FROM AWTEN|OOGUMENT= THDS0"
rr i fic
‘Torque values shown applicable to "black" or "plated" bolts and nuts used with
integral flanges. For fluoropolymer coated bolts and nuts click here.
CAUTION: This API flange mates with a 12" 900 CLASS RTJ, ANSIB 16.5
flange. The resulting connection has a working pressure of 2160 PSI.
Flanges with "R" ring grooves can connect and seal with either R or RX ring
gaskets. RX gaskets increase the stand-off between flanges, and studs shown in
the illustration above have sufficient length to accommodate RX gaskets in these
connections. In some cases equipment design may restrict clearance and shorter
studs will increase convenience. For information on these shorter stud lengths,
see AWHEM document TR9501 at www.awhem.ora/docs.htm. To compare the
difference in stand-off when using R or RX gaskets click here
CAUTION: The difference in stand-off between R and RX gaskets can cause
alignment problems on close coupled manifolding or pressure contolling loops.
Assembly designers specify component dimensions which allow for the difference
in stand-off between flanges when choosing either R or RX gaskets. When
operators perform maintenance that involves disassembly, trouble free
reassembly requires using gaskets the same as the gaskets originally chosen.