Professional Documents
Culture Documents
MS For Reinstatement of MS Grille
MS For Reinstatement of MS Grille
AREA OF WORK
- Grille area at
- paint remover
- Scraper
- Blasting machine (0.8 bar - 2bar)
- Garnet
- Welding plant
- Anti-corrosion paint
- Wood putty
STEPS
Surface preparation
1. Apply a layer of paint remover on the Ornamental grille by using paint brush and wait
for two-hour chemical reaction (paint starts to peel off).
2. Remove the loose paint slowlyby using a spatula without damaging the grille.
3. The remaining paint residue will be removed by paint remover application followed
by the use of a garnet blasting to receive SA 2.5 standard (near white finish)
Grilles to be restored
1. Once the surface preparation is done, primer will be applied on the MS grille soon
with a brush or roller as per product specifications.
2. Once the primer is dry enough, 2nd coating will be applied as per product
specifications.
3. Finally the last coat will be applied as per product specifications. The final colour to
be confirmed by the consultant.