Professional Documents
Culture Documents
MS Removal of PC Vent
MS Removal of PC Vent
- Electric breaker
STEPS
Figure 1
2. Hack off the bottom cement screed using the electrical breaker. See figure 2
Figure 2
3. Find out the connecting rods embedded inside the screed at the bottom of the PC
vent. See figure 3
Connecting Rod
Figure 3
4. Hack off the top concrete screed right above the same locations of the bottom
connecting rods to remove the connection of the rod with the top screed.
Continuation of
connecting Rods at
opposite sides
Figure 4
5. Hack off the side connection screed using the electrical breaker. See figure 5.
Figure 5
6. Remove the PC vent carefully and laid on a flat surface. See Figure 6
Figure 6