Professional Documents
Culture Documents
HSL Heavy Duty Expansion Anchor 4.3.3 4.3.3.1 Product Description
HSL Heavy Duty Expansion Anchor 4.3.3 4.3.3.1 Product Description
HSL-I M12 Flush Anchor HSLG-R Stainless Steel 4.3.3.5 Ordering Information
with Torque Nut with Thread Rod
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Product Technical Guide 2008 311
12_HSL.QXD:H440.04_04e Anchor.QXD 12/30/07 1:14 AM Page 312
312 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Product Technical Guide 2008
12_HSL.QXD:H440.04_04e Anchor.QXD 12/30/07 1:14 AM Page 313
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Product Technical Guide 2008 313
12_HSL.QXD:H440.04_04e Anchor.QXD 12/30/07 1:14 AM Page 314
N
Anchor Spacing Adjustment Factors Edge Distance Adjustment Factors
s = Actual Spacing c = Actual Edge Distance
s s min = 1.0 h nom c min = 1.0h nom
V Tension
s cr = 3.0 h ef c cr = 2.5 h ef
c c min = 1.0 h nom
Shear
c cr = 2.5 h nom
h
s cr
Anchor Size h nom mm (in.) 3.0 3.0
ccr
M10 75 (3)
Shear &
2.0 Tension 2.0 Shear
M12 80 (3-3/16) s c
h ef h ef
M16 105 (4-1/8) s min cmin Tension
1.0 c 1.0
M20 130 (5-1/8) h nom
h ef - actual embedment depth
0 0
h nom - standard embedment depth 0 .2 .4 .6 .8 1.0 0 .2 .4 .6 .8 1.0
Anchor Spacing Adjustment Factor Edge Distance Adjustment Factor
(fA) (fRV, fRN)
Load Adjustment Factors (Anchor Spacing) f A Load Adjustment Factors (Edge Disdtance) f R
s min = 1.0 h nom s cr = 3.0 h ef c min = 1.0 h nom c cr = 2.5 h ef c min = 1.0 h nom c cr = 2.5 h nom
s c 1.0 hnom c
f A = 0.15
h ef
+ 0.55 f RN = (0.30)
( 2.5 h ef 1.0 h nom )
+ 0.70 f RV = 0.47
h nom
0.17
for s cr > s > s min for c cr > c > c min for c cr > c > c min
314 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Product Technical Guide 2008
12_HSL.QXD:H440.04_04e Anchor.QXD 12/30/07 1:14 AM Page 315
1. Drill a hole with the prescribed 2. Clean the hole using 3. Using a hammer, tap the pre- 4. Tighten bolt or nut to the
Hilti metric carbide or dia- compressed air. assembled anchor through specified torque, using a
mond core bit. Note: the HSL the object being anchored torque wrench.
can be installed in a and into the hole. The anchor
bottomless hole. should be seated firmly
against the base plate. Note:
Do not expand the anchor by
hand before tapping it into
hole depth = 80 mm
hole depth = 95 mm
the hole.
hef = 65 mm
hef = 80 mm
hef = 65mm spacer sleeve for
Setting Instructions for the HSL-I M12-0 65/80 hef = 80mm
18 mm 18 mm
hole depth = 80 mm
hole depth = 80 mm
hole depth = 95 mm
hole depth = 95 mm
hef = 65 mm
hef = 65 mm
hef = 80 mm
hef = 80 mm
hef = 65mm hef = 65mm spacer sleeve for spacer sleeve for
hef = 80mm hef = 80mm
18 mm 18 mm 18 mm 18 mm
hef = 65mm
hef = 80mm pre-setting final setting
18 mm
284900
18 mm 18 mm
4.3.3.5 Ordering Information
284900
284900
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Product Technical Guide 2008 315
12_HSL.QXD:H440.04_04e Anchor.QXD 12/30/07 1:14 AM Page 316
Listings/Approvals
ICC-ES (International Code Council)
ESR-1917
FM (Factory Mutual) Supplemental Design Provisions for ACI 318-05 Appendix D
Pipe Hanger Components for Automatic
Sprinkler Systems (3/8" - 3/4") Design strengths are determined in accordance with ACI 318-05 Appendix D and
UL (Underwriters Laboratories)
ICC Evaluation Service ESR-1917 Hilti Kwik Bolt TZ Carbon and Stainless Steel
Pipe Hanger Equipment for Fire
Protection Services (3/8" - 3/4") Anchors in Concrete. The relevant design parameters are reiterated in Tables 1, 2,
and 3 of this document. Supplemental provisions required for the design of the
KB-TZ are enumerated in Section 4.0 of ESR-1917 (DESIGN AND INSTALLATION).
C
Note that these design parameters are supplemental to the design provisions
Building Code Compliance of ACI 318-05.
IBC 2006
IRC 2006
UBC 1997
316 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en espaol 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Product Technical Guide 2008