Professional Documents
Culture Documents
J Timers and Control Relays
J Timers and Control Relays
Lovato J-17
Modular timing devices Klemsan J-23
Electro J-25 26/29 30
Lovato J-18
Modular protection relays Klemsan J-23 24
Electro J-27 28/30 32
Lovato J-19
Level control Klemsan J-23
Electro J-26/32
pin coil
type current description contact price
pitch voltage
ES50CNER Ersce black surface/DIN mount socket (screw terminal) ser 40/44 45.00
ER902220 spring securing/release clip for socket ES50 4.90
ER902230 clip-on marking plate (top or bottom) for socket (10pcs) ES50 3.20
434170122000 10A low profile slim PCB relay 1 ch/over 3.2 mm 12 VDC 38.00
4351 434170242000 10A low profile slim PCB relay 1 ch/over 3.2 mm 24 VDC 38.00
9523SNA 9523SNA PCB-mount socket 43 series relay (with retaining clip) 4341 16.00
Plug-in or direct connection via robust faston terminals (1pole 4.75 / 2pole 2.5 mm)
AC and DC coil voltages
8 mm, 6kV (1.2/50s) isolation, coil-contacts
Lockable test/override button
Manual override facility and mechanical flag indication of relay status
46618... coil
type current description contact price
voltage
Plug-in termination
Plug-in or direct PCB mounting
AC and DC coil voltages
Lockable test/override button (plug-in version only)
Mechanical flag indication of relay status (plug-in version only)
2, 3 and 4 pole versions
55328... coil
type current description contact price
voltage
2 changeover contacts
553280120040 10A miniature plug-in relay 2 changeover 12 VAC 96.00
553280240040 10A miniature plug-in relay 2 changeover 24 VAC 96.00
553280360040 10A miniature plug-in relay 2 changeover 36 VAC 113.00
553280480040 10A miniature plug-in relay 2 changeover 48 VAC 113.00
553280600040 10A miniature plug-in relay 2 changeover 60 VAC 113.00
553281100040 10A miniature plug-in relay 2 changeover 110 VAC 113.00
553282300040 10A miniature plug-in relay 2 changeover 240 VAC 106.00
4 changeover contacts
553480120040 7A miniature plug-in relay 4 changeover 12 VAC 102.00
9414SMA 553480240040 7A miniature plug-in relay 4 changeover 24 VAC 102.00
553480360040 7A miniature plug-in relay 4 changeover 36 VAC 120.00
553480480040 7A miniature plug-in relay 4 changeover 48 VAC 120.00
553480600040 7A miniature plug-in relay 4 changeover 60 VAC 120.00
553481100040 7A miniature plug-in relay 4 changeover 110 VAC 120.00
553482400040 7A miniature plug-in relay 4 changeover 240 VAC 113.00
for
type description
9402SPA relay
ER600420 * Accepts plug-in LED, diode, timing modules (plugs directly into socket) see page J-8
09406 6 way jumper link (bridge bar) for socket 9402/04 35.00
09456 6 way jumper link (bridge bar) for socket 94P4 50.00
46392/PS sheet of (48) marking tags (mounts onto retain clip or holder) 940/P2/4 66.00
09700 tag holder for 46392/PS tags (mounts directly onto socket) 940/P2/4 2.30
ES152NCNER Ersce black surface/DIN mount socket (screw terminal) 5532 50.00
ES154NCNER Ersce black surface/DIN mount socket (screw terminal) 5534 57.00
contact coil
type current description price
configuration voltage
coil
type current description contact price
voltage
6012...
601280120040 10A 8 pin plug-in industrial relay 2 ch/over 12 VAC 134.00
601280240040 10A 8 pin plug-in industrial relay 2 ch/over 24 VAC 134.00
601280360040 10A 8 pin plug-in industrial relay 2 ch/over 36 VAC 148.00
601280480040 10A 8 pin plug-in industrial relay 2 ch/over 48 VAC 148.00
601280600040 10A 8 pin plug-in industrial relay 2 ch/over 60 VAC 148.00
601281100040 10A 8 pin plug-in industrial relay 2 ch/over 110 VAC 148.00
601282400040 10A 8 pin plug-in industrial relay 2 ch/over 240 VAC 143.00
601284000040 10A 8 pin plug-in industrial relay 2 ch/over 400 VAC 177.00
601290120040 10A 8 pin plug-in industrial relay 2 ch/over 12 VDC 134.00
601290240040 10A 8 pin plug-in industrial relay 2 ch/over 24 VDC 134.00
6013...
601290360040 10A 8 pin plug-in industrial relay 2 ch/over 36 VDC 148.00
601290480040 10A 8 pin plug-in industrial relay 2 ch/over 48 VDC 148.00
601290600040 10A 8 pin plug-in industrial relay 2 ch/over 60 VDC 148.00
601291100040 10A 8 pin plug-in industrial relay 2 ch/over 110 VDC 143.00
601292200040 10A 8 pin plug-in industrial relay 2 ch/over 220 VDC 209.00
601380120040 10A 11 pin plug-in industrial relay 3 ch/over 12 VAC 138.00
9015
601380240040 10A 11 pin plug-in industrial relay 3 ch/over 24 VAC 138.00
601380360040 10A 11 pin plug-in industrial relay 3 ch/over 36 VAC 151.00
601380480040 10A 11 pin plug-in industrial relay 3 ch/over 48 VAC 151.00
601380600040 10A 11 pin plug-in industrial relay 3 ch/over 60 VAC 151.00
9013
601381100040 10A 11 pin plug-in industrial relay 3 ch/over 110 VAC 151.00
601382400040 10A 11 pin plug-in industrial relay 3 ch/over 240 VAC 148.00
601384000040 10A 11 pin plug-in industrial relay 3 ch/over 400 VAC 181.00
9020SMA
601390120040 10A 11 pin plug-in industrial relay 3 ch/over 12 VDC 138.00
601390240040 10A 11 pin plug-in industrial relay 3 ch/over 24 VDC 138.00
601390360040 10A 11 pin plug-in industrial relay 3 ch/over 36 VDC 151.00
601390480040 10A 11 pin plug-in industrial relay 3 ch/over 48 VDC 151.00
601390600040 10A 11 pin plug-in industrial relay 3 ch/over 60 VDC 151.00
601391100040 10A 11 pin plug-in industrial relay 3 ch/over 110 VDC 148.00
601392200040 10A 11 pin plug-in industrial relay 3 ch/over 220 VDC 214.00
9026SMA
Other configurations: replace last two digits with following:
54 internal LED indicator for AC relays + 30.00
74 internal LED indicator for DC relays + 30.00
46392/PS sheet of (48) marking tags (mounts directly onto relay) for relays 6012/3 66.00
9048
9020SMA surface/DIN mount socket (screw terminal) standard for relay 6012 62.00
9021SMA surface/DIN mount socket (screw terminal) standard for relay 6013 69.00
9022SMA surface/DIN mount socket (screw terminal) oval for relay 6012 43.00
9023SMA surface/DIN mount socket (screw terminal) oval for relay 6013 47.00
9026SMA surface/DIN mount socket (screw terminal) square for relay 6012 64.00
9027SMA surface/DIN mount socket (screw terminal) square for relay 6013 71.00
9048SMA surface/DIN mount socket (screw terminal) rectangular for relay 6012 79.00
9003SMA 9049SMA surface/DIN mount socket (screw terminal) rectangular for relay 6013 89.00
9002SMA
* surface/DIN mount socket (screw terminal) for modules for relay 6012 68.00
9003SMA
* surface/DIN mount socket (screw terminal) for modules for relay 6013 75.00
* Accepts plug-in LED, diode, timing modules (plugs directly into socket) see page J-8
09006 6 way jumper link (bridge bar) for sockets 9002/3 46.00
090002 spare marking tag for sockets 9002/3 1.90
ES11CNER ES8CNER Ersce black surface/DIN mount socket (screw terminal) 6012 49.00
ES11CNER Ersce black surface/DIN mount socket (screw terminal) 6013 52.00
coil
type current description contact price
voltage
20A 1 NO + 1 NC
30A 1 NO
3 mm contact gap
30A 2 changeover
Diode module
Recovery diode modules are used for DC applications, reverse voltage peaks of the coil are short
circuited by the recovery diode, release time is increased by a factor of 3.
9902002459 green plug-in LED indicating module for sockets 6 - 24 VAC/DC 35.00
9902006059 green plug-in LED indicating module for sockets 28 - 60 VAC/DC 36.00
9902023059 green plug-in LED indicating module for sockets 110 - 240 VAC/DC 35.00
9902902499 green plug-in LED + diode indicating module for sockets 6 - 24 VDC 40.00
9902906099 green plug-in LED + diode indicating module for sockets 28 - 60 VDC 41.00
9902922099 green plug-in LED + diode indicating module for sockets 110 - 220 VDC 40.00
RC circuit module
RC circuit modules are used for AC and DC applications. The reverse voltage peaks of the
coil are limited by the RC module to approximately 2.5 times the nominal supply voltage.
Insignificant increase in release times.
9902...09
9902002409 green plug-in RC module fo AC and DC lines 6 - 24 VAC/DC 50.00
9902006009 green plug-in RC module fo AC and DC lines 28 - 60 VAC/DC 51.00
9902023009 green plug-in RC module fo AC and DC lines 110 - 240 VAC/DC 50.00
9902823007 plug-in residual current bypass module 110 - 240 VAC 40.00
9902...07
Timer modules
Multi-function, multi-voltage timer module
Time range1s, 10s, 100s, 10m, 100m, 10hr, 100hr (adjustable)
Plugs directly into sockets converting standard relays into timing devices
8630...
86000...
26 series step relays (pulse ON, pulse OFF) (H) 46.6 x (W) x 45 x (D) 22 mm
Base/chassis mounting
Screw terminal connections
AC coil (maximum pulse duration 1 hour)
Electrically separated coils and contact circuits
260380120000 10A 2 step base mounting step relay 1NO+1NC 12 VAC 201.00
260380240000 10A 2 step base mounting step relay 1NO+1NC 24 VAC 201.00
260381100000 10A 2 step base mounting step relay 1NO+1NC 110 VAC 201.00
260382300000 10A 2 step base mounting step relay 1NO+1NC 230 VAC 201.00
202380120000 16A 2 step modular pulse step relay 2 contact 12 VAC 326.00
202380240000 16A 2 step modular pulse step relay 2 contact 24 VAC 326.00
202382300000 16A 2 step modular pulse step relay 2 contact 230 VAC 326.00
202390120000 16A 2 step modular pulse step relay 2 contact 12 VDC 326.00
202390240000 16A 2 step modular pulse step relay 2 contact 24 VDC 326.00
202680120000 16A 3 step modular pulse step relay 2 contact 12 VAC 326.00
202680240000 16A 3 step modular pulse step relay 2 contact 24 VAC 326.00
202682300000 16A 3 step modular pulse step relay 2 contact 230 VAC 326.00
2023...
202690120000 16A 3 step modular pulse step relay 2 contact 12 VDC 326.00
202690240000 16A 3 step modular pulse step relay 2 contact 24 VDC 326.00
202480120000 16A 4 step modular pulse step relay 2 contact 12 VAC 326.00
202480240000 16A 4 step modular pulse step relay 2 contact 24 VAC 326.00
202482300000 16A 4 step modular pulse step relay 2 contact 230 VAC 326.00
202490120000 16A 4 step modular pulse step relay 2 contact 12 VDC 326.00
202490240000 16A 4 step modular pulse step relay 2 contact 24 VDC 326.00
202880120000 16A 4 step modular pulse step relay 2 contact 12 VAC 326.00
202880240000 16A 4 step modular pulse step relay 2 contact 24 VAC 326.00
202882300000 16A 4 step modular pulse step relay 2 contact 230 VAC 326.00
202890120000 16A 4 step modular pulse step relay 2 contact 12 VDC 326.00
202890240000 16A 4 step modular pulse step relay 2 contact 24 VDC 326.00
105182300000 12A mini light dependant daylight switch 1 NO 230 VAC 581.00
223200124340 25A
*
1.0 kW modular contactor 1 2 NO 12V 417.00
223200244340 25A
*
1.0 kW modular contactor 1 2 NO 24V 417.00
223200484340 25A
*
1.0 kW modular contactor 1 2 NO 48V 417.00
223202304340 25A
*
1.0 kW modular contactor 1 2 NO 230V 417.00
02218 8 way jumper link for 2 pole contactors 1 17.5 mm blue 61.00
02226 6 way jumper link for 4 pole contactors 2 35 mm blue 61.00
02001 adaptor chassis mounting adaptor 1 17.5 mm 3.70
01101 adaptor chassis mounting adaptor 2 35 mm 4.10
46392/PS sheet of (48) marking tags (mounts directly onto contactor) 2232/4 66.00
19 series modular DIN rail mount relay (H) 84 x (W) 11.2 x (D) 57 mm
switching operating
type description current contact price
voltage voltage
09363
MasterPLUS relay interface modules (general interface for use in any type application)
393100240060
Accepts output fuse module (09363) for ease / space efficient protection of output circuits
Common connection possible with optional 16 way jumper link (term A1, A2, 11)
Electromechanical relays
393100120060 relay interface module 6A 1 ch/over 12 VAC/DC 175.00
393100240060 relay interface module 6A 1 ch/over 24 VAC/DC 175.00
393182300060 relay interface module 6A 1 ch/over 230 VAC 230.00
Electromechanical relays
394100125060 relay interface module 6A 1 ch/over 12 VAC/DC 212.00
394100245060 relay interface module 6A 1 ch/over 24 VAC/DC 212.00
394182305060 relay interface module 6A 1 ch/over 230 VAC 267.00
Electromechanical relays
392100120060 relay interface module 6A 1 NO 12 VAC/DC 175.00
392100240060 relay interface module 6A 1 NO 24 VAC/DC 175.00
392182300060 relay interface module 6A 1 NO 230 VAC 230.00
392100240060
Solid state relays
392070129024 relay interface module 2A 1 NO 1.5...24 DC 12 VDC 346.00
392070249024 relay interface module 2A 1 NO 1.5...24 DC 24 VDC 357.00
392082309024 relay interface module 2A 1 NO 1.5...24 DC 230 VAC 379.00
09368141 master adaptor (interconnects 8 interface modules to common ribbon cable) 336.00
- permits easy connection of up to 8 interface modules A1/A2 (+ power supply)
terminals to PLC outputs via 14 pole ribbon cable
09316 16 way plug-in jumper link (bridge bar) 36A - 250V blue 44.00
093160 16 way plug-in jumper link (bridge bar) 36A - 250V black 44.00
093161 16 way plug-in jumper link (bridge bar) 36A - 250V red 44.00
09368141
09360 plastic separator for interface modules (1.8 or 6.2mm separation) 14.60
09316 46392/PS sheet of (48) marking tags (mounts onto retain clip) 9505/P5 66.00
coil
type current description contact price
voltage
Electromechanical relays
3801...
380170120050 16A relay interface module 1 ch/over 12 VDC 227.00
380170240050 16A relay interface module 1 ch/over 24 VDC 227.00
380100240060 16A relay interface module 1 ch/over 24 VAC/DC 290.00
380102400060 16A relay interface module 1 ch/over 240 VAC/DC 311.00
3831... 4304 series relay interface module 4 way (43 series relay 10A)
4-way DIN rail mounting relay interface module
Compact: (H) 90 x (W) 54 x (D) 30 mm (with relays)
Incorporates LED relay status indication and diode protected coils
Negative common (standard) / positive (+) common (on request)
Plug-in version for easy relay replacement (relays 4341 to be ordered separately)
43049000P 10A 4 way plug-in version 12/24 VDC 190.00
4004 series relay interface module 4 way (40 series relay 10A)
4-way DIN rail mounting relay interface module
Compact:(H) 76 x (W) 71 x (D) 55 mm (with relays)
Incorporates LED relay status indication and diode protected coils
Negative common (standard) / positive (+) common (on request)
3408...
40049012 10A 4 way fixed relay interface 1 ch/over 12 VDC 363.00
40049024 10A 4 way fixed relay interface 1 ch/over 24 VDC 363.00
40048230 10A 4 way fixed relay interface 1 ch/over 230 VAC 580.00
Plug-in version for easy relay replacement (relays 4051 to be ordered separately)
40049000P 10A 4 way plug-in version 12/24 VDC 279.00
40048000P 10A 4 way plug-in version 230 VAC 279.00
4004...
All Celduc SSRs (solid state relays) are fitted with back-to-back thyristors and employ 4th generation TMS2
technology with a very long life expectancy.
Celpac SU series power relays (H) 42 x (W) 91 x (D) 22.5 mm
SU9 range for resistive loads (AC-51) - heating (H) 91 x (W) 42 x (D) 22.5 mm
SU8 range for most load types - lamps and infrared (H) 91 x (W) 42 x (D) 22.5 mm
DC control
SU842070 25A 12- 275 VAC 600V 3 - 32 VDC zero-cross for most loads 540.00
SU865070 50A 24 - 510 VAC 1200V 3.5 - 32 VDC zero-cross for most loads 694.00
SU867070 75A 24 - 510 VAC 1200V 3.5 - 32 VDC zero-cross for most loads 1188.00
AC control
SU842970 25A 12 - 275 VAC 600V 180 - 240 VAC zero-cross for most loads 558.00
SU865970 50A 24 - 510 VAC 1200V 180 - 240 VAC zero-cross for most loads 728.00
SU7 range for motor loads (AC-53) inductive loads and phase angle control applications
SU865070
Random or instant switching (<50s)
SU765070 50A 24 - 510 VAC 1200V 3.5 - 32 VDC random for motor loads 1216.00
Heatsinks SSR current ratings are based on sufficient cooling by the use of heatsinks
WF311100 3K/W DIN rail mountable heatsink 80 22.5 73 354.00
WF151200 2.2K/W DIN rail mountable heatsink 80 45 73 259.00
WF311100 5TH24000 thermal transfer pads for mounting SU relays onto heatsinks 10.70
Very high immunity according to IEC/EN 61000-4-4 (bursts) and IEC/EN 61000-4-5 (spikes)
EMC compatible for industrial environment Regulated input current
Control status LED IP20 protection cover (removable)
SO9 range for resistive loads (AC-51) - heating (H) 59.4 x (W) 45 x (D) 30mm
SO941460 12A 12 - 280 VAC 600V 3 - 32 VDC zero-cross for resistive loads 297.00
SO942460 25A 12 - 280 VAC 600V 3 - 32 VDC zero-cross for resistive loads 330.00
SO943460 35A 12 - 280 VAC 600V 3 - 32 VDC zero-cross for resistive loads 408.00
SO965460 50A 24 - 600 VAC 1200V 3 - 32 VDC zero-cross for resistive loads 570.00
SO942460
SO967460 75A 24 - 600 VAC 1200V 3 - 32 VDC zero-cross for resistive loads 630.00
SO8 range for most load types - lamps and infrared (H) 59.4 x (W) 45 x (D) 30mm
DC control
SO842074 25A 12 - 275 VAC 600V 3 - 32 VDC zero-cross for most loads 524.00
SO845070 50A 12 - 275 VAC 600V 3 - 32 VDC zero-cross for most loads 593.00
SO865070 50A 24 - 510 VAC 1200V 3.5 - 32 VDC zero-cross for most loads 674.00
SO867070 75A 24 - 510 VAC 1200V 3.5 - 32 VDC zero-cross for most loads 1154.00
SO868070 95A 24 - 510 VAC 1200V 3.5 - 32 VDC zero-cross for most loads 1279.00
SO869070 125A 24 - 510 VAC 1200V 3.5 - 32 VDC zero-cross for most loads 2411.00
AC control
SO842974 25A 12 - 275 VAC 600V 20 - 265 VAC/DC zero-cross for most loads 558.00
SO865970 50A 24 - 510 VAC 1200V 20 - 265 VAC/DC zero-cross for most loads 707.00
SO867070
SO867970 75A 24 - 510 VAC 1200V 20 - 265 VAC/DC zero-cross for most loads 1187.00
SO868970 95A 24 - 510 VAC 1200V 20 - 265 VAC/DC zero-cross for most loads 1332.00
SO869970 125A 24 - 510 VAC 1200V 20 - 265 VAC/DC zero-cross for most loads 1845.00
SO7 range for motor loads (AC-53) inductive loads and phase angle control applications
Random switching Solid State Relay designed for high inductive loads, motors (AC-53)
Over-Voltage protection on input (transil) and output (RC and VDR)
DC control
SO765090 50A 24 - 510 VAC 1200V 3.5 - 32 VDC random for motor loads 903.00
SO767090 75A 24 - 510 VAC 1200V 3.5 - 32 VDC random for motor loads 1266.00
SO768090 95A 24 - 510 VAC 1200V 3.5 - 32 VDC random for motor loads 1403.00
Dual zero cross Solid State Relay with LED indication for each input
Plug-in control terminals (connector to be ordered separately)
1Y042715 plug-in input screw terminal for SOB 9 (above) dual phase relay 69.00
Heatsinks SSR current ratings are based on sufficient cooling by the use of heatsinks
WF151200 2.2K/W DIN rail mountable heatsink 80 45 72 259.00
WF108110 1.1K/W DIN rail mountable heatsink 90 98 81 370.00
WF115100 0.9K/W DIN rail mountable heatsink 110 90 100 1154.00
WF151200
5TH23000 thermal transfer pads for mounting SO relays onto heatsinks 8.80
1LD12020 DIN rail adaptor for direct DIN rail mounting of SO relays 174.00
SO465020 50A 200 - 480 VAC 1200V 0-10V proportional output SSR 3159.00
SO468020 75A 200 - 480 VAC 1200V 0-10V proportional output SSR 3576.00
SO469020 95A 200 - 480 VAC 1200V 0-10V proportional output SSR 4291.00
SO465320 50A 200 - 480 VAC 1200V potentiometer proportional output SSR 3159.00
SO3 series fast burst control mode (P based) (H) 58.5 x (W) 45 x (D) 30 mm
Particularly suited to resistive loads with low thermal inertia like short wave Infra Red sources
(IR lamps). It permits very fine control of power according to the analog input signal while reducing
SOM040200
noise emission level (EMC conducted emissions).
SO367001 75A 160 - 450 VAC 1200V 0-10V fast burst control SSR 3342.00
SOM range
Designed to switch DC loads e.g. solenoid valves, brakes, indicators.
SOM040200 40A 5 - 110 VDC 200V 3.5 - 32 VDC DC output Solid State Relay 1450.00
Heatsinks SSR ratings are based on sufficient cooling by the use of heatsinks
WF151200 5TH23000 thermal transfer pads for mounting SO relays onto heatsinks 8.80
1LD12020 DIN rail adaptor for direct rail mounting of SO relays 174.00
SGB series two leg three-phase relays (H) 75.2 x (W) 100 x (D) 46 mm
SGB967360E
Designed for controlling three-wire three-phase loads connected in star or delta (if balanced without
neutral). Two of the three phases are switched by the SSR and the third being directly connected.
Three phase zero cross solid state relay with one direct connected phase
Designed for resistive loads
SGB965360E 3x50A 24 - 600 VAC 1200V 10 - 30 VDC zero cross for resistive loads 1499.00
SGB967360E 3x75A 24 - 600 VAC 1200V 10 - 30 VDC zero cross for resistive loads 1858.00
SGT series three-phase solid state relays (H) 75.2 x (W) 100 x (D) 46 mm
DC control
SGT965360E 3x50A 24 - 600 VAC 1200V 10 - 30 VDC zero cross for resistive loads 1879.00
SGT967360E 3x75A 24 - 600 VAC 1200V 10 - 30 VDC zero cross for resistive loads 2226.00
SGT968360E 3x95A 24- 600 VAC 1200V 10 - 30 VDC zero cross for resistive loads 2560.00
SGT769390E 3x125A 24 - 520 VAC 1200V 8.5 - 30 VDC random for most loads 6826.00
AC control
SGT967960E 3x75A 24 - 600 VAC 1200V 90 - 240 VAC zero cross for resistive loads 2337.00
SGT967360E
Accessories for above three-phase series relays
Heatsinks SSR ratings are based on sufficient cooling by the use of heatsinks
WF115100 0.9K/W DIN rail mountable heatsink 110 90 100 1154.00
1K199000 cover transparent terminal cover for relays SGB and SGT 66.00
AC output
SLA02220 2A 12- 280 VAC 600V 7 -2 0 VDC AC slim PCB mount SSR 322.00
SLA03220 2A 12 - 280 VAC 600V 18 - 32 VDC AC slim PCB mount SSR 322.00
SLA02220
DC output
SLD02205 4A 0 - 32 VDC 60V 7 - 20 VDC AC slim PCB mount SSR 275.00
SLD03205 4A 0 - 32 VDC 60V 18 - 32 VDC AC slim PCB mount SSR 275.00
AC output
SPA07420 4A 12 - 275 VAC 600V 12 - 30 VDC AC std PCB mount SSR 347.00
STA07220 2A 12 - 275 VAC 600V 12 - 30 VDC AC output solid state relay 343.00
TMPL multi-range, multi-voltage, unequal repeat timer (1 C/over) 12 - 240 VAC/DC 1073.00
Delay on de-energisation timer (relay remains energised for preset time after removal of supply)
TMST multi-range, multi-voltage, star-delta electronic timer 24 - 48 VDC / 24-240 VAC 662.00
L48TPS240 multi-range/multi-voltage on-delay electric timer 24 VDC / 24/110 / 240 VAC 433.00
S - 3sec / 12sec / 100sec / 780sec (adjustable)
L48TPM240 multi-range / multi-voltage (1-relay output) 24 VDC / 24/110 / 240 VAC 433.00
on-delay timer 3/12/100/780min
L48TPBM240 on-delay panel mount electronic timer 220 / 240 VAC 503.00
0.05-1s/10s/1min/10min
Accessories
L48TP...
ES8CNER 8 pin surface/DIN rail mounting relay socket (screw terminals) 49.00
D-48Y flush-mounting bracket for panel mounting above L48 timers 24.00
P3G08 8 pin socket for panel mounting (rear terminals) (screw terminals) 35.00
monitored module
type description price
voltage width (mm)
PMV55A240
PMV50A575 three-phase over/under voltage monitor 380 - 575 VAC 35 mm 1259.00
PMA50A240 pump protection relay (against dry running) 220 - 240 VAC 54 mm 2150.00
PMA50A415 pump protection relay (against dry running) 380 - 440 VAC 54 mm 2150.00
supply module
type description price
voltage width
LVM40 five detecting probes (Min1, Max1, Min2, Max2 and Com)
Adjustments: - Sensitivity 2.5 - 200k (sep adj for Max for foam detection)
- Probe signal delay 1-10s - pump start delay 0 - 30min
Selectable: - Standard emptying and alarms (or) standard filling and alarms
LVM40 - Emptying with priority start-up change control
- Filling with priority start-up change control
- Well draining and tank filling and alarms
LVM40A240 5 probe liquid level control relay 220 - 240 VAC 54 mm 1399.00
LVM40A415 5 probe liquid level control relay 380 - 415 VAC 54 mm 1399.00
Dirty water applications - for civil and industrial control of levels for sewage or waste water from
industry. Float switch made of "one-piece" blow moulded polypropylene casing with fixed internal
counter weight located in the cable exit area.
- Activation angle -15 +15 - neoprene cable
LVFSN1B05 float switch for sewage or waste water applications 5 met 1114.00
LVFSN1B05
LVFSN1B10 float switch for sewage or waste water applications 10 met 1387.00
supply RS485
CTA4100A type output 2 description price
voltage comms
S48/704/B6
AZ58 reverse (rear connected) screw terminal socket for S48/1400 timers 107.00
L48P8 in-line (cord-end) 8 pin socket for S48/1400 timers 120.00
1400/704/B6
ew
Mounting by 2 x M4 screws
n Supplied with graduated dial + knob
Temperature controllers
DTK series "low cost" temperature controller 100 - 240 VAC 50/60Hz (only 60mm deep)
PID, ON/OFF, Manual control modes 1 alarm output with 9 selectable alarm modes
DTK4848R01
DTK4848R01 48 x 48 low cost temperature controller relay 850.00
DTK4848V01 48 x 48 low cost temperature controller 14 VDC pulse 850.00
DTK4848C01 48 x 48 low cost temperature controller 4 - 20mA 850.00
DTK4896R01 48 x 96 low cost temperature controller relay 940.00
DTK4896V01 48 x 96 low cost temperature controller 14 VDC pulse 940.00
DTK4896C01 48 x 96 low cost temperature controller 4 - 20mA 940.00
DTD series "economical" temperature controller 100 - 240 VAC 50/60Hz (IP65)
PID, programmable PID, ON/OFF, Manual control modes, 1 alarm output with 8 alarm modes
DTD4848R0 48 x 48 econo temperature controller relay 980.00
DTD4848R0 DTD4848V0 48 x 48 econo temperature controller 14 VDC pulse 980.00
DTD4896R0 48 x 96 econo temperature controller relay 1063.00
DTA series "standard" temperature controller 100 - 240 VAC 50/60Hz (IP65)
PID, ON/OFF, Manual control PID parameter Auto-Tuning
DTA4848R0 48 x 48 standard temperature controller relay 1186.00
DTA4848V0 48 x 48 standard temperature controller 14 VDC pulse 1186.00
DTA4848C0 48 x 48 standard temperature controller 4 - 20mA 1186.00
DTA4896R0 48 x 96 standard temperature controller relay 1289.00
DTA9648R0 96 x 48 standard temperature controller relay 1289.00
DTA7272R0 72 x 72 standard temperature controller relay 1289.00
DTA9696R0 96 x 96 standard temperature controller relay 1439.00
DTB series "advanced" temperature controller 100 - 240 VAC 50/60Hz (IP65)
DTA4896R0
Two groups of outputs to auto-tune 2 groups of PID parameters 3 groups of alarm outputs
Sampling rate: Analog input: 0.15 sec, Thermocouple or platinum RTD 0.4 seconds
Built-in dual loop output control for heating / cooling (RS485 digital comm. 2.400 - 38.400bps)
DTB4824RR 48 x 24 advanced temperature controller relay relay 1351.00
DTB4848RR 48 x 48 advanced temperature controller relay relay 1650.00
DTB4848VR 48 x 48 advanced temperature controller 14 VDC pulse relay 1650.00
DTB4848CR 48 x 48 advanced temperature controller 4 - 20mA relay 1650.00
DTB4848LR 48 x 48 advanced temperature controller 0 - 5, 0 - 10V relay 1650.00
DTB4896RR 48 x 96 advanced temperature controller relay relay 1800.00
DTB4896VR 48 x 96 advanced temperature controller 14 VDC pulse relay 1800.00
DTB4896CR 48 x 96 advanced temperature controller 4 - 20mA relay 1800.00
DTA7272R0
DTB9696RR 96 x 96 advanced temperature controller relay relay 1949.00
DTB9696VR 96 x 96 advanced temperature controller 14 VDC pulse relay 1949.00
DTB9696CR 96 x 96 advanced temperature controller 4 - 20mA relay 1949.00
DTB9696LR 96 x 96 advanced temperature controller 0 - 5, 0 - 10V relay 1949.00
DTB4848RRE
* 48 x 48 event input with 2 setpoints relay relay 1702.00
DTB4896RRE
* 48 x 96 event input with 2 setpoints relay relay 1856.00
*Event function, permits switching between 2 different temperature set points
KN-1/2PT-8-200-PT100 1/2 PT terminal box (6) screw terminal box 8 200 mm 928.00
KN-1/2PT-8-300-PT100 1/2 PT terminal box (6) screw terminal box 8 300 mm 975.00
(3)
Add 3 to end of part number for 3 meter cable length +108.00
Type J sensors
KN-1/2PT-8-200-J 1/2 PT terminal box (6) screw terminal box 8 200 mm 836.00
KN-1/2PT-8-300-J 1/2 PT terminal box (6) screw terminal box 8 300 mm 882.00
Add 3 to end of part number for 3 meter cable length +50.00
Type K sensors
(4) (6)
Tube: SUS304 material
KN-1/2PT-8-200-K 1/2 PT terminal box (6) screw terminal box 8 200 mm 836.00
KN-1/2PT-8-300-K 1/2 PT terminal box (6) screw terminal box 8 300 mm 882.00
Add 3 to end of part number for 3 meter cable length +50.00
Connectors
SD1
SD1 Star-Delta modular timer
Applying supply activates the preset (130 sec) "star" time period where after the preset (20500msec)
delay occurs before the "delta" relay is energised, it remains in this position until supply is removed.
Modular DIN rail mounting (H) 90.4 x (W) 17.5 x (D) 66.5 mm (aligns with standard 1 pole MCB)
Output contact: 1 C/O 10A 250 VAC
Operating temp: -20 - +60C
Protection: IP20
Modular DIN rail mounting (H) 90 x (W) 36 x (D) 58 mm (aligns with standard 2 pole MCB)
LC3 Output contact: 1 C/O 10A 250 VAC
Operating temp: -20 - +60C
Time delay: 0.110sec (adjustable via front mounted adjuster)
Multi-voltage: 150500 VAC
Protection relays
MID-SA phase-failure/reversal/imbalance 17.5 mm (1 module wide)
270144 380 - 480 (L2-L3) 3 ph phase failure/reversal/imbalance relay 478.00
270140 380 - 480 25%(L2-L3) 3ph over/under voltage monitor with ph failure/reversal 478.00
270130 230 25% (L1-N) 3ph+N over/under voltage monitor + ph failure/reversal 408.00
3 way - 1,5kV RMS isolation (Input, output and supply electrically isolated from one another)
Compact modular (H) 90.4 x (W) 17.5 x (D) 66.5 mm (same dimensions as single pole MCB)
602310 11-30 VDC PT100 (2,3,4 wire) configurable PT100 converter 2387.00
600101 85-265 VAC TRMS voltage true RMS voltage transducer 2003.00
600103 10-36 VDC TRMS voltage true RMS voltage transducer 2144.00
600105 9-30 VDC TRMS voltage loop powered voltage transducer 1137.00
600106 10-36 VDC TRMS voltage true RMS voltage transducer 2559.00
600100 85-26 VAC TRMS current true RMS current transducer 2003.00
600102 10-36 VDC TRMS current true RMS current transducer 2144.00
600100
600104 9-30 VDC TRMS current loop powered current transducer 1137.00
The Electro "D" range of control and timing devices are compact modular units for easy introduction into
standard panels and/or distribution boards. They mount directly onto DIN rail and align with standard
miniature circuit breakers (MCB's).
NO
TIME RANGE
on-delay
1
0.6 - 6s interval
2 6 - 60s equal repeat
DMFT/V
DMFT
* 3
4
- 6m
0.6
6 interval
- 60m
off delayed (pulse controlled)
(pulse controlled)
10A SPDT 580.00
5 0.6 - 6h
step relay
6 6 - 60h
7
ON
pulse generator
8 OFF on/off delay
Multi-range off delay (delay on release) timer with advanced backup power circuitry to deliver
wide time ranges. The unit has to be powered for no less than 30 sec + 30% of set time range.
If permanent power is available the DMFT timer should be used.
NO TIME RANGE
1 0.3 - 6s
2 0.9 - 30s
DOD
DOD
* 3
4
6 - 60s
0.9 - 6m
delay on de-energisation 8A SPDT 560.00
5 0.3 - 30m
6 6 - 60m
NOTE: Unit has to stay energized for 30 sec + 30% of the time range.
Multi range timer designed with the latest technology that covers most combinations of ON/OFF time
ranges. Any change made to time range by means of front mounted dials will result in a reset of the unit.
TIME RANGE A TIME RANGE B
NO ON (adj) OFF (adj) NO ON (adj) OFF (adj)
1 0.3 - 6s 0.3 - 6s 1 3 - 60s 3 - 6m
2 3 - 60s 3 - 60s 2 0.3 - 6m 0.3 - 60s
3 0.3 - 6m 0.3 - 6m 3 3 - 6m 3 - 60m
DUR
* 4
5
3 - 60m 3 - 60m
0.3 - 6s 0.3 - 60s
4
5
0.3 - 60m 0.3 - 6m
3 - 60m 3 - 6h
unequal repeating 10A SPDT 580.00
6 3 - 60s 3 - 6s 6 0.3 - 6h 0.3 - 60m
7 0.3 - 6s 0.3 - 60m 7 3 - 60s 3 - 6h
8 3 - 60m 3 - 6s 8 0.3 - 6h 0.3 - 60s
DUR
Star-Delta timer
Multi-range Star / Delta timer with adjustable transition delay for starting inductive motors.
Applying supply switches relay to "star" for the pre-set star period, on lapse of the star period
the relays switches to a neutral "transition" position (4-180 ms) where after the relay switches
to the "delta" position and remains there until supply is removed.
DSD
* 0.9 to 30 sec
3 to 60 sec
star-delta timer 2 x 6A SPDT
(with neutral)
526.00
Defrost timer
Microprocessor based defrost timer with four selectable cycle times and separately adjustable fan
delay of 3 - 60 seconds and defrost time range from 0.3 - 60 minutes.
DDT
* Cycle:
Defrost:
4 or 8 hr
3-60 min
defrost timer 3 x 6A SPDT 603.00
* Voltage: 12
12 VAC,
VDC,
24 VAC, 48 VAC, 110 VAC, 230 VAC, 400 VAC, 525 VAC
24 VDC, 48 VDC (other voltages available on request)
Tachometer
On the unit over or under speed detection can be selected. While the speed remains below the set
speed (over speed) or above (under speed) the relay will remain energised.
DTM
DTM4
* 1 - 1000 RPM
1 - 1000 RPM
over/under speed
over/under speed
10A SPDT
4 - 20mA
603.00
620.00
Temperature controller
DTM The unit interfaces with the TP1 probe. The unit can be set for over or under temperature where the relay
de-energises when the temperature rises above (over temp.) or fall below (under temperature) the set limit.
-20 - +80C
+10 - +50C
DTC
* -10 - +10C
over / under temperature 10A SPDT 594.00
0 - +80C
TP1 -50 -120C temperature probe _ 154.00
Power supply
Provides a regulated DC output from an AC input source (24VA)
Output : 12/24 VDC
DPSU 2A/1A power supply 603.00
4 numbers for SMSes can be programmed On, Off and pulse relay function
DLL
* 2 probes + comm emptying/ filling 10A SPDT 515.00
emptying/filling with alarm
DGSM DLL4
* 4 probes + comm
emptying/filling with pump priority
container filling/well draining with alarm
10A SPDT 797.00
electrode test
0-5A 1
DCC
* 0-15A 2
4-20mA 8
current converter 764.00
4-20mA 5 0-10VDC 11
DSI
* 0-20mA 6
0-10VDC 7
isolated optical converter 950.00
*
Note: Select input () /output signal (), along with supply ( ) when ordering a signal converter/isolator.
DSI
*
Voltage: 12 VAC, 24 VAC, 48 VAC, 110 VAC, 230 VAC, 400 VAC, 525 VAC
12 VDC, 24 VDC, 48 VDC (other voltages available on request)
The Electro "D" range of control and timing devices are compact modular units for easy introduction into
standard panels and/or distribution boards. They mount directly onto DIN rail and align with standard miniature
circuit breakers (MCB's).
DPP1
* single phase pump protection relay 16A SPDT 684.00
DPP3
* three phase pump protection relay 16A SPDT 758.00
DPP4
DPP4
* three phase pump protection relay (with adjustment /function selection) 16A SPDT 790.00
DPF1
* failure/reversal relay 10A SPDT 467.00
DPF1/K
* failure/reversal relay with adjustment 10A SPDT 515.00
DPF1/N
* failure/reversal relay with adjustment and neutral 10A SPDT 515.00
DVW1
* single phase electronic timer 10A SPDT 588.00
DVW3
* three phase electronic timer with reversal 10A SPDT 594.00
DVW3N
* three phase / neutral electronic timer with reversal 10A SPDT 588.00
Voltage monitor
DVW3N
Monitors a separate voltage than supply
Delays : No delay, startup delay 10 sec,180 sec recovery delay, reaction delay 10 sec
DVM/
** 4-40V
40-400V
voltage monitor device 10A SPDT 586.00
Frequency monitor
Monitors frequency of supply.
Delays : No delay, startup delay 10 sec,180 sec recovery delay, reaction delay 10 sec
DFM
* frequency monitor device 45 - 55Hz 10A SPDT 603.00
Current monitor
Over or under current monitoring.
Delays : No delay, startup delay 10 sec,180 sec recovery delay, reaction delay 10 sec
DCM
DCM
** current monitor device can interface with 5A CT 10A SPDT 678.00
DCM15
** current monitor device direct monitor up to 15 A 10A SPDT 678.00
DCW
** current window comparator timer can interface with 5A CT 10A SPDT 678.00
DCW15
** current window comparator timer direct monitor up to 15 A 10A SPDT 678.00
DLS
** load shed relay 1 circuit 16A SPDT 651.00
DLS3
** load shed relay 3 circuits NO 1 x 16A / 2 x 6A SPDT 848.00
DLS3
DRLS
** load shed relay 1 circuit with real time clock 16A SPDT 1018.00
DDCT
* counter / timer 10A SPDT 862.00
DDCT DDCT/B
* as above with battery backup 10A SPDT 989.00
DDTC
* digital temperature controller 2 x 6A SPDT 862.00
DDTCT
TP1
* temperature controller with 24 hour clock
temperature probe
2 x 6A SPDT 989.00
154.00
Defrost timer with four selectable cycle times and separately adjustable fan.
DDDT
* digital defrost timer 3 x 6A SPDT 1018.00
DDVW1
* single phase digital voltage monitor 2 x 6A SPDT 1074.00
DDVW3
* three phase digital voltage monitor 2 x 6A SPDT 1074.00
DDVW3 DDVW3N
* three phase and neutral digital voltage monitor 2 x 6A SPDT 1074.00
DDCW1
* single phase digital current monitor 2 x 6A SPDT 1283.00
DDCW3
* three phase digital current monitor 2 x 6A SPDT 1390.00
* Voltage: 12 VAC, 24 VAC, 48 VAC, 110 VAC, 230 VAC, 400 VAC, 525 VAC
12 VDC, 24 VDC, 48 VDC (other voltages available on request)
DDCW3
The Electro 11 pin plug-in range of control and timing devices are to be installed into a standard 11 pin base
making installation easy and convenient.
TIME RANGE
On-delay
A B Interval
T2M
* 1
2
- 6s 0.3 - 6m
0.3
3 - 60s 3 - 60m
Equal repeat 10A DPDT 480.00
3
0.3 - 6m 0.3 - 6h Interval (pulse controlled)
T3M
* 4 3 - 60m 3 - 60h as above with instantaneous 10A SPDT 566.00
T2D
* 3s,10s, 30s, 60s, 180s, 380s delay on release 10A SPDT 551.00
T2D/B
* 10min, 30min, 60min,180min delay on release 10A SPDT 608.00
Note for pulses shorter then 30s + 30%, PT11/PT13 should be used.
R2U
TNE
* 30s, 60s, 180s star-delta timer 10A SPDT 419.00
cycle: 4 or 8 hr
DEF1/F
* defrost:
fan:
3-60 min
3-60 sec
defrost timer 574.00
* Voltage: 12 VAC, 24 VAC, 48 VAC, 110 VAC, 230 VAC, 400 VAC, 525 VAC
12 VDC, 24 VDC, 48 VDC (other voltages available on request)
THC1
* two hand controller 10A SPDT 467.00
M1S
* target/space sensing relay 10A SPDT 390.00
THC1 Flip flop relays
Flip flop relays to control many applications such as spreading work load and controlling conveyor
direction. F30 combines the discontinued F10 and F23 function. F30 in the mains controlled function
has to be energised for at least 30 seconds before the supply is removed.
F12
* pulse controlled without memory 8A SPDT 509.00
F30
* pulsed controlled with memory or mains controlled 8A SPDT 543.00
Power supply
Provides a regulated DC output from an AC input source.
PSU overload/short circuit protection 2VA 263.00
PSU/10 overload/short circuit protection 24VA 845.00
Temperature relay
Directly interface with conventional PT100 ( 3 wire ) sensors, the relay energises and remains so
until pre-set maximum temperature limit is reached.
SC120A
* 0-1A 1
0-5A 2 4-20mA 11
current convertor 855.00
SC120V
* 4-40V 3
40-400V 4
0-20mA 12
0-5 VDC 13
voltage convertor 854.00
SC100P
* 0-50Hz 5
max 20kHz 6
0-10 VDC 14 frequency convertor POR
4-20mA 7
SI120
* 1-5 VDC 8
0-20mA 9
signal isolator 1252.00
The Electro 11 pin plug-in range of control and timing devices are to be installed into a standard 11 pin base
making installation easy and convenient.
Current monitor
The module directly interfaces with conventional 5A CTs.The relay will only operate as long as
monitored current remains below the pre-set limit or above the pre-set limit.
Hysteresis 5-50%
LA5
* over / under current current monitor 10A SPDT 594.00
LA5/P
* pivot control relay current monitor 10A SPDT 602.00
WA5
* over / under current monitor 10A SPDT 594.00
* Voltage: 12
12 VAC, 24 VAC, 48 VAC, 110 VAC, 230 VAC, 400 VAC, 525 VAC
VDC, 24 VDC, 48 VDC (other voltages available on request)
LA5
Voltage monitor
V1C is a precise UNDER / OVER voltage monitoring relay. This relay monitors a separate
voltage input (Pins 5 + 7). The relay will only operate as long as the monitored voltage remains
BELOW the pre-set overvoltage limit or ABOVE the pre-set overvoltage limit.
V1C
* over or under voltage monitor 10A SPDT 532.00
Frequency monitor
The relay is energised as long as measured frequency is within the presettable limits.
H1E
* over and under frequency monitor 10A SPDT 503.00
SF1
* phase failure 10A SPDT 396.00
V1C
SF1/K
* phase failure with adjustment for NPS 10A SPDT 411.00
Phase failure protection / phase reversal protection Over / under voltage protection
V1E
* over and under single phase voltage monitor 10A SPDT 572.00
V3E
* over and under 3 phase voltage monitor 10A SPDT 591.00
V3E/N
* over and under 3 phase +neutral voltage monitor 10A SPDT 591.00
EMX02 blank adhesive front label for EMD02 (2 modular) housing 16.80
EMX03 blank adhesive front label for EMD03 (3 modular) housing 24.00
EMD03
EMX04 screw adjustable knob for internal potentiometer 2.40
Note: For printed circuit terminals see page J-32
Level controllers (fail safe control and monitoring of high and / or low levels)
Level control unit of which can be configured for FILLING or EMPTYING.
The unit can be used as a two probe system for alarm purposes or a three probe system to control
HIGH and LOW levels of a reservoir. Up to four LV1 can be utilized in the same reservoir by
connecting all commons (pin7). The sensitivity of the unit can also be adjusted.
LV1
* emptying/ filling liquid conductive controller 10A SPDT 480.00
LVC1
* emptying/ filling DC capacitive probe controller 10A SPDT 447.00
LV1
* Voltage: 12
12 VAC, 24 VAC, 48 VAC, 110 VAC, 230 VAC, 400 VAC, 525 VAC
VDC, 24 VDC, 48 VDC (other voltages available on request)
PSR1
PSR4
*
only 12/24V
3 circuits
4 circuits
pump sequencing relay
pump sequencing relay
3 x 5A SPDT
4 x 5A SPDT
549.00
582.00
LP1
* 6 hours (others on request) single ph pump protection relay 10A SPDT 538.00
LP2
* 1-2-4-8 hours single ph pump protection relay 10A SPDT 684.00
LP3
* 1-2-4-8 hours three ph pump protection relay 10A SPDT 701.00
Accessories
SN1 single line insulated stainless steel probe for conductive liquids 101.00
PS3S 3 electrode holder (mounts through 50.5 mm hole) 113.00
P1000S electrodes for PS3S holder (1 meter length) 17.00
FS03-3P electrode spacer disc (for extended probe length) 25.00
SN1 PXL extension locknut (each) 17.00
No. rated
type pitch wire size colour
ways current
MRT6... MRT6P5/2VE 5.0 4 (double deck) 24A 0.2 - 2.5 mm green 12.20
MRT6P5/3VE 5.0 6 (double deck) 24A 0.2 - 2.5 mm green 18.30
MRT20...
48 x 48 mm panel mounting digital timing, counting, control and monitoring devices are available in a
compact housing design. It has many innovative features such as various relay output options as well as
re-tx (re-transmit) function offering an additional 4-20 mA output with specific monitoring devices.
Standard supply voltages AC: 12V, 24V, 48V, 110V, 240V, 400V, 500V, 525V
DC: 12V, 24V, 48V (isolated supply available on request + R160.00)
DC: 5V, 18-36V, 36-72V (isolated supply available on request + R300.00)
Current monitors
Displays and/or monitors true RMS AC current signal from current transformers.
Temperature controllers
Displays and/or monitors temperature using various temperature sensors.
sensor
P44TC1
P44TCT1
* temperature controller
temp controller and 24hr timer
TS3 probe
TS3 probe
-30C to 105C
-30C to 105C
1
2
1229.00
1347.00
Standard supply voltages AC: 12V, 24V, 48V, 110V, 240V, 400V, 500V, 525V
DC: 12V, 24V, 48V (isolated supply available on request) + 160.00
DC: 5V, 18-36V, 36-72V (isolated supply available on request) + 300.00
Feature ability to continue from where left off in the event of a power loss during timing.
Current monitors
Displays and/or monitors true RMS AC current signal from current transformers.
Temperature controllers
Displays and/or monitors temperature from various temperature sensors.
sensor
P49TC1
* temperature controller TS3 probe -30C to 105C 1 1248.00
P49TC2
P49TCT1
* temperature controller
temp controller & 24hr timer
TS3 probe
TS3 probe
-30C to 105C
-30C to 105C
2
2
1328.00
1368.00
* Can be used with one or two TS3 temperature probes (for high and low temp monitoring)
P49HTC1 temperature controller PT100 -50C to 440C 1 1426.00
P49HTC1-T temperature controller PT100 -50C to 440C yes 1 1843.00
P49HTCT1 temp controller & 24hr timer PT100 -50C to 440C 2 1526.00
Temperature controllers
Monitors and displays temperature using various temperature sensors.
sensor
D3TC1
* temperature controller TS3 probe -30C to 105C 1 1308.00
D3TC2
D3TCT1
* temperature controller
temp controller & 24hr timer
TS3 probe
TS3 probe
-30C to 105C
-30C to 105C
2
2
1387.00
1426.00
Displays and monitors transducer generated signals with outputs 0-10V as real world values
from -999 to 9999 for indicating voltage, current, temperature, pressure etc. and displaying in real values.
* Available with a 0-5V or 10K potentiometer input 0-10V re-transmit available on request
Monitors and displays speed (RPM) relay remains energised while monitored speed
is within pre-set parameters.
LEFOO