Professional Documents
Culture Documents
IT Solution: How To Configure HP SAN Storage MSA 2040 Step by Step
IT Solution: How To Configure HP SAN Storage MSA 2040 Step by Step
IT Solution
Saturday, May 9, 2015 About Me
step
phot Follow 0
o
View my complete
Default IP range for HP SAN storage MSA 2040 is 10.0.0.1/2 profile
You need to connect your laptop and storage with cross cabling and assign the same range IP
address.
Blog Archive
1-: Now in your system browser type
2016 (1)
http://itsolution-rajuprasad89.blogspot.com/2015/05/how-to-configure-hp-san-storage-... 9/26/2016
IT Solution: How to configure HP SAN storage MSA 2040 step by step Page 2 of 8
3-: Assign Time & Date manually or define through NTP server.
http://itsolution-rajuprasad89.blogspot.com/2015/05/how-to-configure-hp-san-storage-... 9/26/2016
IT Solution: How to configure HP SAN storage MSA 2040 step by step Page 3 of 8
Click next
Click Yes
10-: Now you can see all HDD that you have connect in storage, In my storage I have installed 6 HDD
that is showing here.
http://itsolution-rajuprasad89.blogspot.com/2015/05/how-to-configure-hp-san-storage-... 9/26/2016
IT Solution: How to configure HP SAN storage MSA 2040 step by step Page 4 of 8
Click OK
12-: Click on Host and you will see here all 4 unassigned drive
13-: Now click on pool and see the all HDD space, storage Name and Drive space
First you need to select on Group name and after that you need to follow below step
A Click on Host
B Click on Action> Add Host
http://itsolution-rajuprasad89.blogspot.com/2015/05/how-to-configure-hp-san-storage-... 9/26/2016
IT Solution: How to configure HP SAN storage MSA 2040 step by step Page 5 of 8
Click OK
15-: How to Remove Host Name
First you need to select a Group Name
http://itsolution-rajuprasad89.blogspot.com/2015/05/how-to-configure-hp-san-storage-... 9/26/2016
IT Solution: How to configure HP SAN storage MSA 2040 step by step Page 6 of 8
A First you need to select Volume Name that you want to delete.
B Click on Action select Delete Volume
Now Please check in your system Mapped volume will display in your system Disk management
Initially it will Display in Offline Mode but you need to bring it Online for this you need to just right click
on Device and select Online.
12 comments:
http://itsolution-rajuprasad89.blogspot.com/2015/05/how-to-configure-hp-san-storage-... 9/26/2016
IT Solution: How to configure HP SAN storage MSA 2040 step by step Page 7 of 8
Reply
I have volume size 800GB, I want expand size to 1TB, but I already rescan esxi
datastore,expand volume no change ---> 1TB , Why ??
Reply
Reply
Replies
Thanks for comment,,default IP for MSA 2040 is 10.0.0.1 and 2 for both controller
you can direct connect your laptop with storage using LAN cable and assign same
range IP in your laptop and use below path..
HTTPS://10.0.0.1/2
Password:- !manage
Reply
Reply
Reply
Hi Raju,
after mapping it it automatic detected by host? or need configuration also on hosts system..
thanks
Reply
Hi Raju,
after mapping it it automatic detected by host? or need configuration also on hosts system..
thanks
Reply
Replies
You need to enable iscsi initiator and MPIO future in server and after that you will
be able to access LUN in your system.
Reply
Hi Raju,
http://itsolution-rajuprasad89.blogspot.com/2015/05/how-to-configure-hp-san-storage-... 9/26/2016
IT Solution: How to configure HP SAN storage MSA 2040 step by step Page 8 of 8
Can you send me an screenshot on how Tiering Configuration in MSA2040 can be done? do
i need to install first the license of tiering feaatures before Tiering be available in the system?
Reply
NICE SHARE
Reply
Replies
Thanks
Reply
Enter your comment...
Publish Preview
http://itsolution-rajuprasad89.blogspot.com/2015/05/how-to-configure-hp-san-storage-... 9/26/2016