Professional Documents
Culture Documents
Objectives: Ateneo de Naga University College of Engineering ECE and CPE Department Summer S/Y 2014 - 2015
Objectives: Ateneo de Naga University College of Engineering ECE and CPE Department Summer S/Y 2014 - 2015
College of Engineering
ECE and CPE Department
Summer S/Y 2014 2015
SAMPLING
1
Ateneo de Naga University
College of Engineering
ECE and CPE Department
Summer S/Y 2014 2015
PROCEDURE
1. Prepare the materials needed in the experiment.
2. Read and follow the TIMS Model shown in Fig 2.
3. Set the frequency of the Input signal to 1 kHz and 3 kHz for the Tuneable LPF gain.
4. Connect the Channel 1 of the Oscilloscope at the output of Dual Analog Switch to
get the samples of the input waveform similar to the Fig.3.
LABORATORY PROPER
Given the input signal, the sampled signal is reconstructed.
2
Ateneo de Naga University
College of Engineering
ECE and CPE Department
Summer S/Y 2014 2015
FREQUENCY VARIATION
Frequency Waveform
@1kHz
@2kHz
3
Ateneo de Naga University
College of Engineering
ECE and CPE Department
Summer S/Y 2014 2015
@3kHz
@4kHz
@5kHz
4
Ateneo de Naga University
College of Engineering
ECE and CPE Department
Summer S/Y 2014 2015
TUNE VARIATION
Waveform
At maximum variation
with respect to Tune,
you can see that
theres no delay in the
waveform between
the input and the
sampled signal.
At Medium variation,
theres a certain delay
between the input and
the sampled signal.
The sampled signal
leads while the output
signal lags.
At minimum variation,
the two signal,(input
and sampled), reflects
each others
waveform.
5
Ateneo de Naga University
College of Engineering
ECE and CPE Department
Summer S/Y 2014 2015
GAIN VARIATION
Waveform
At maximum gain, the
gain of the two signals
is equal.
6
Ateneo de Naga University
College of Engineering
ECE and CPE Department
Summer S/Y 2014 2015