Professional Documents
Culture Documents
Results and Discussion
Results and Discussion
Results and Discussion
Data collected and gathered are used to formulate the calibration curve. Calibration curve
will be used to treat the data for every sampling point. Concentration is determined using the
Table 3.1
Concentration, mg/L Absorbance Concentration and
5 0.115 Absorbance for
15 0.331 the Calibration
20 0.352 Curve
30 0.472
40 0.591
Sulfates
Sulfates General Trend
0.7
A y = 0.0129x + 0.0878
0.6
b R = 0.9677
s 0.5
o 0.4
r 0.3
b
0.2
a
n 0.1
c 0
e 0 5 10 15 20 25 30 35 40 45
Concentration, mg/L
Figure 3.1 The calibration curve use in treating the data for sulfates
Table 3.2 Concentration Determination Using the Calibration Curve (Wednesday Class)
Table 3.3 Concentration Determination Using the Calibration Curve (Friday Class)
Sampling Absorbance Concentration Average
Point Trial 1 Trial 2 Trial 1 Trial 2
Neverland 0.128 0.126 3.11627907 2.96124031 3.0387597
Resort
Lasong Bridge 0.149 0.149 4.74418605 4.74418605 4.744186
Amount of sulfates that are present in the water sample can be seen on the tables above.
Minerals and soils are factors that pitch in to the existence of sulfates. Dissolved minerals can be
released and can be mixed with the water in the river, thus minerals can be dissolved any time.
Resorts and Hot springs are present along the river thats why plumbing system and deep wells is
theoretically present.