Professional Documents
Culture Documents
how to design of deluge water spray system - 副本
how to design of deluge water spray system - 副本
how to design of deluge water spray system - 副本
Typical Application rates for Deluge Water Spray System: (API 2030):
2. Factors determining the requirement of Deluge Water Spray System:
Spray System for Process Pumps:
o When pumps handle hydrocarbon liquids (flammable or combustible) at
temperatures above its flash point.
o Located Close to equipment that can be quickly damaged by pump fire.
o Where protection of pumps is impractical by monitors/hydrants and potential of
fire escalation is possible.
Spray System for Pipe racks:
o To be evaluated based on potential of pool fires or severe exposures below the
pipe rack.
Spray System for Vessels & Columns :
o High pressure vessels (>10 barg) handling flammable / combustible liquids with
inventory above 5 tons and also based on project philosophy.
o Vessels handling flammable / combustible liquids and located in a congested
area.
Spray System (cooling) for Atmospheric Storage Tanks:
o API 2001 recommends protection of the portion of shell and roof not in contact
with the liquid content of tank. (@4.1 lpm/m2)
o Sectionalization of the spray rings should be done for optimization of water
quantity.