Professional Documents
Culture Documents
Tb5000-Gas-Turbine Manual PDF
Tb5000-Gas-Turbine Manual PDF
Tb5000-Gas-Turbine Manual PDF
The TB5000 was designed for industrial duty, with the same philosophy as
earlier Gas Turbines being applied, such as reliability. This gives the TB5000
the ability to run for long periods without change of major components allied
to on-site maintenance capability.
The TB5000 offered proven reliability, with over 800 The TB5000 offered:
TB units of all types in worldwide operation which Proven reliability
have accrued in excess of 20 million running hours.
Low maintenance cost
The TB5000 delivers between 3.4 and 3.81MW ISO rating Low installed cost
and its twin-shaft configuration provides for a wide range
Easy on-site maintenance
of power generation and mechanical drive applications in
any environment. High availability
Reliable starting
The TB5000s compact design and ease of operation and
maintenance made it an ideal prime mover for offshore Ease of operation
platforms and remote installations. Dual fuel capability
Steam injection capability
Single-lift package capability
Inlet & exhaust ducting layout flexibility
www.siemens.com/energy
with automatic changeover form primary to secondary
fuel possible across the entire load range.
The two-stage power turbine, with externally air-cooled
discs, is aerodynamically coupled to the gas generator
and provides power for the driven unit. Control System
To maintain alignment between rotating and static
elements, the power turbine stator casing is attached to
the gearbox through air-cooled support struts within the
exhaust elbow. Compactness with rigidity is a feature of
the power turbine assembly.
Flexibility
The highly responsive TB5000 offered unmatched
reliability for base load electrical power generation
and mechanical drive, onshore and offshore. A version
Texacos Tartan Field platform with 13 Siemens Gas Turbines of the TB5000 was also used as a prime mover in the
installed; five to drive generators, two for main oil line pump drive, Nomad 5, a compact, self contained, mobile power
three to drive gas compressors and three to drive water injection
station designed to meet base load and peak electrical
pumps. Exhaust heat from the gas turbines driving the generators
was recovered and used in the processing of the well gas.
demands up to 3.8MW.
The TB5000 is well suited for cogeneration and combined
Design Features cycle power applications. Using exhaust gas to generate
steam for process use or supplementary power
A heavy duty industrial gas turbine, the TB5000
generation significantly increases the system efficiency.
offered the characteristics of high reliability and long
life associated with well designed turbo machinery. Steam may also be used for injection into the TB5000 to
increase the power output which also reduces heat rate
The TB5000 is a simple-cycle unit which consists of a
and emissions. Options exist for emissions control by
12-stage subsonic axial-flow compressor, a two-stage air-
primary injection; power enhancement up to 4.2MW
cooled overhung compressor turbine, four combustion
ISO by secondary injection and power enhancement
chambers and a separate two-stage power turbine. The
with emissions control using both injection systems.
compressor features variable inlet guide vanes to modulate
airflow and assure fast easy start-up and maximum A fully integrated Siemens controls package suitable for
efficiency under partial loads. The centre casing is split all applications is available, offering high reliability and
horizontally along the centre line providing access to the incorporating features to enhance engine and systems
compressor with the minimum of dismantling. availability.
The four reverse-flow tubular combustion chambers, Options are available to provide control sequencing and
externally mounted around the forward face of the monitoring of driven equipment and auxiliaries used in
centre casing assembly, are specially designed for long power generation, cogeneration and mechanical drive
life and are readily accessible for inspection purposes. applications. The controls package may also be extended
to cover data logging, plant supervisory control and
The flexible fuel system is capable of operating on a wide
financial management of complex power systems.
variety of gaseous fuels including refinery gas, landfill
gas and high CO2 content as, as well as distillate fuel,
Standard roll-out gear enables the gas generator to be Length - 260 (7925 mm)
simply removed from the turbine when blade inspection Height - 80 (2438 mm)
is due, or when servicing is required. With the gas Width - 80 (2438 mm)
generator removed, the rotating assembly is readily Weight - 43,000 lb (19,505 kg)
accessible by removing the top half of the stator casing.
Combustion chambers and fuel burners are equally
accessible when servicing is required. Compressor Set
Length - 260 (7925 mm)
Height - 80 (2438 mm)
Width - 80 (2438 mm)
Weight - 57,000 lb (25,855 kg)
Normal Continuous Ratings Performance
Altitude Correction Parameter Power and Specific Heat Input v Speed
0
Altitude 0m 500m 1000m 1500m 2000m 2500m 9750
9980
5000
1.000 0.943 0.888 0.835 0.786 0.739
Specific Heat 10500 15
Altitude 0ft 2000ft 4000ft 6000ft 8000ft 10000ft Input Btu/bhp h
1.000 0.930 0.864 0.801 0.743 0.688
Ambient Temp C
11000
30
4000
BHP output shaft speed 7900 rev/min. 12000 45
3000
indirect drive is 1.5%.
13000
2000
5000
14000
Power Output Parameter bhp/
15000
-10 0 10 20 30 40 50 60 C
Generator Drive
0 20 40 60 80 100 120 F
Direct drive - no outputAmbient
gearboxTemperature ISO Rating 4900 BHP
5000
No
48 rm
al
Co
nti
nu
ou
46 sR
Inlet and exhaust ducting losses have not been debited. Power ati
ng
4000
Ex
44
tG
52
0
Te
42
m
Zero Loss Power Output bhp/
production engines.
pe
ra
tu
40
re
50
3000
0
C
when using a gas turbine as the single power and heat source in an
38
integrated manufacturing process. The curves show the variation of 48
0
exhaust gas mass flow and temperature at sea level and different lb/s
46
36
0
Flow
44
M
Gas
0
40
t
aus 34
0
Exh
38
30
Approximate Region of IGV Change -Over
1000
40
38
0
30
36
0
0
34
0
32
0
0
0
-20 -10 0 10 20 30 40 50 C
0 20 40 60 80 100 120 F
Ambient Temperature
Published by and copyright 2013: For more information, please contact Energy Service Division All rights reserved. Trademarks mentioned in
Siemens AG our Customer Support Center. LCN 2013 - F33.18 LN this document are the property of Siemens AG,
Energy Sector Phone: +49 180 524 70 00 its affiliates, or their respective owners.
Printed on elementary chlorine-free
Freyeslebenstrasse 1 Fax: +49 180 524 24 71
bleached paper. Subject to change without prior notice.
91058 Erlangen, Germany (Charges depending on provider)
The information in this document contains
E-mail: support.energy@siemens.com
Siemens Energy, Inc. general descriptions of the technical options
4400 Alafaya Trail available, which may not apply in all cases.
Orlando, FL 32826-2399, USA The required technical options should
therefore be specified in the contract.
www.siemens.com/energy