Professional Documents
Culture Documents
Gas Control: VAREC 7100B Series
Gas Control: VAREC 7100B Series
Introduction
The Varec 7100B Series is a pressure relief Flow curves are provided to help you select
valve designed to protect atmospheric and the proper size for your venting
low pressure storage tanks. The dead-weight requirements. In addition, your local Varec
loaded valve utilizes weights proportional to sales engineer can provide sizing software to
the seat surface area to achieve the desired assist you in your selection. If you would like
setting. The Air-Cushion seating design sizing and selection assistance, Varecs
keeps the valve tightly sealed until the applications engineering staff and factory
pressure inside the tank approaches the trained representatives are available to
valve setting. assist you.
The 7100B is part of Varecs modular An All-Weather option is offered for freezing
products which use interchangeable climates. The design features a special
components for assembling a variety of non-frosting and icing-resistant coating on
functional configurations. The modular the pallet perimeter and stem, guide posts
design provides flexibility of field installation and tipof- seat ring. The coating, along with
and allows the valve to be reconfigured, the flexible Teflon seat insert, provides
repaired and even upgraded on-site by additional protection against pallets freezing
simply replacing or adding components. closed.
The wide range of materials and sizes allows For high temperature and chemical
for its use in virtually any application applications, Varec recommends the
encountered in the typical tank farm or liquid extended service option which features
storage facility. The 7100B vents to Teflon or Viton O-ring and gasket.
atmosphere. For the outlet flange option,
please refer to Varec Series 3650B.
Varec Biogas reserves the right to change product design and specifications without notice.
Copyright 2015 by Varec Biogas a Division of Westech Industrial Inc.
VAREC 7100B Series PRESSURE RELIEF VALVES
Specifications
Sizes Testing Flanged Connections
2 [50 mm] Each valve is tested for proper setting and for (STANDARD FLANGE DRILLING)
3 [80 mm] a leakage rate of 1 SCFH (0.03 Nm3/hr) or Aluminum
4 [100 mm] less of air at 90% of the set point. Each valve Drilled to ANSI Class 150 Dimensions
6 [150 mm] is tested for leak tightness at 75% of set point (Flat-Faced)
8 [200 mm] as required by API standard 2000.
Drilled to DIN 2633 [16 Bar] Dimensions
10 [250 mm]
(Flat-Faced)
12 [300 mm]
Drilled to JPI or JIS (Flat Faced)
Materials of Construction Consult your sales representative
10 12
1 11
9 8 6
Parts and Materials Table
Material Code
Item 1 2 3 4 5
Varec Biogas reserves the right to change product design and specifications without notice.
Copyright 2015 by Varec Biogas a Division of Westech Industrial Inc.
VAREC 7100B Series PRESSURE RELIEF VALVES
Specifications
7100B SERIES
A A
Lead
Weight
(A/R)
B
A
Setting Information
Minimum Pressure
Low Set, oz/ in2
Size Aluminum 316 SS Low Set Range High Set Range
Varec Biogas reserves the right to change product design and specifications without notice.
Copyright 2015 by Varec Biogas a Division of Westech Industrial Inc.
VAREC 7100B Series PRESSURE RELIEF VALVES
Specifications
Flow Curves
7100B Series Relief Valve, Set at 0.865 inches of Water
Thousand Cubic Feet/Hour at 60F and 14.7 psia, Air Flow (SCFH)
Flow Curves
7100B Series Relief Valve, Set at 1 inches of Water
Thousand Cubic Feet/Hour at 60F and 14.7 psia, Air Flow (SCFH)
Varec Biogas reserves the right to change product design and specifications without notice.
Copyright 2015 by Varec Biogas a Division of Westech Industrial Inc.
VAREC 7100B Series PRESSURE RELIEF VALVES
Specifications
Flow Curves
7100B Series Relief Valve, Set at 2 inches of Water
Thousand Cubic Feet/Hour at 60F and 14.7 psia, Air Flow (SCFH)
Flow Curves
7100B Series Relief Valve, Set at 4 inches of Water
Thousand Cubic Feet/Hour at 60F and 14.7 psia, Air Flow (SCFH)
Varec Biogas reserves the right to change product design and specifications without notice.
Copyright 2015 by Varec Biogas a Division of Westech Industrial Inc.
VAREC 7100B Series PRESSURE RELIEF VALVES
Specifications
Flow Curves
7100B Series Relief Valve, Set at 6 inches of Water
Thousand Cubic Feet/Hour at 60F and 14.7 psia, Air Flow (SCFH)
Flow Curves
7100B Series Relief Valve, Set at 8 inches of Water
Thousand Cubic Feet/Hour at 60F and 14.7 psia, Air Flow (SCFH)
Varec Biogas reserves the right to change product design and specifications without notice.
Copyright 2015 by Varec Biogas a Division of Westech Industrial Inc.
VAREC 7100B Series PRESSURE RELIEF VALVES
Specifications
Flow Curves
7100B Series Relief Valve, Set at 10 inches of Water
Thousand Cubic Feet/Hour at 60F and 14.7 psia, Air Flow (SCFH)
Varec Biogas reserves the right to change product design and specifications without notice.
Copyright 2015 by Varec Biogas a Division of Westech Industrial Inc.
VAREC 7100B Series PRESSURE RELIEF VALVES
Ordering Information
Model Description
710 Air Cushion Pressure Relief Valve
Code Configuration
0B Standard
1B All Weather Type (25 F to 200 F)
Code Size
2 2
3 3
4 4
6 6
8 8
0 10
1 12
710 0B 2 1 T FF OP 02 (Example)
Example: 2 Pressure Relief Valve, Aluminum Body with Alumnim Trim, Teflon insert, Flat Faced Flange, Standard Fiber / BUNA-N Gaskets, Low Pressure Set Range,
Temperature Range -40 F - 250 F
Varec Biogas reserves the right to change product design and specifications without notice.
Copyright 2015 by Varec Biogas a Division of Westech Industrial Inc.