Professional Documents
Culture Documents
Calculation of The Beam-Column (Web) Connection: EN 1993-1-8:2005/AC:2009
Calculation of The Beam-Column (Web) Connection: EN 1993-1-8:2005/AC:2009
Calculation of The Beam-Column (Web) Connection: EN 1993-1-8:2005/AC:2009
GENERAL
Connection no.: 15
Connection name: Viga-pilar (alma)
Structure node: 8
Structure bars: 4, 41
GEOMETRY
COLUMN
Section: HEA 120
Bar no.: 4
Material: STAHL St37-2/215
fyc = 215,00 [MPa] Design resistance
BEAM
Section: IPN 120
Bar no.: 41
Material: STAHL St37-2/215
fdb = 215,00 [MPa] Design resistance
PLATE
lp = 80 [mm] Plate length
hp = 80 [mm] Plate height
tp = 8 [mm] Plate thickness
Material: ACERO A37
fdp = 240,00 [MPa] Design resistance
WELDS
agp = 5 [mm] Welds connecting plate with column
apb = 5 [mm] Welds joining plate with beam
atd = 5 [mm] Welds connecting lower support seat with column
atbu = 5 [mm] Welds connecting upper support seat with beam
atd = 5 [mm] Welds connecting lower support seat with column
atbu = 5 [mm] Welds connecting lower support seat with beam
MATERIAL FACTORS
M0 = 1,00 Partial safety factor [2.2]
M2 = 1,25 Partial safety factor [2.2]
LOADS
Case: 2: PERM2
Nb,Ed = 0,32 [kN] Axial force
Vb,Ed = 0,34 [kN] Shear force
Mb,Ed = 0,24 [kN*m] Bending moment
RESULTS
Attention! Materials come from the material database where all properties are defined as DESIGN values.
The currently-set code requires using characteristic values. The resistance may be underrated. It is
recommended to change the material to the material from any database except: RMAT048 (Polish
materials), RMAT070 (Russian materials) , RMAT086 (Chinese materials), RMAT049 (Romanian
materials).
Nw,Ed = 0,12 [kN] Axial force in the web Nw,Ed = (Nb,Ed*Aw)/Ab
Nfu,Ed = 0,10 [kN] Axial force in the upper flange Nfu,Ed = (Nb,Ed*Af)/Ab
Nfl,Ed = 0,10 [kN] Axial force in the lower flange Nfl,Ed = (Nb,Ed*Af)/Ab
WELD RESISTANCE