The document provides solutions to common problems that occur during dental finishing and polishing such as a dull polished surface with fine scratches, overthinning of connectors, nicks or notches in clasps, and distorted frameworks. It recommends following finishing steps in order, completing each step before moving to the next, using the correct wax thickness during wax-up, and taking care when using stones, burs, lathes, and polishing wheels to avoid damaging the framework.
The document provides solutions to common problems that occur during dental finishing and polishing such as a dull polished surface with fine scratches, overthinning of connectors, nicks or notches in clasps, and distorted frameworks. It recommends following finishing steps in order, completing each step before moving to the next, using the correct wax thickness during wax-up, and taking care when using stones, burs, lathes, and polishing wheels to avoid damaging the framework.
The document provides solutions to common problems that occur during dental finishing and polishing such as a dull polished surface with fine scratches, overthinning of connectors, nicks or notches in clasps, and distorted frameworks. It recommends following finishing steps in order, completing each step before moving to the next, using the correct wax thickness during wax-up, and taking care when using stones, burs, lathes, and polishing wheels to avoid damaging the framework.
The document provides solutions to common problems that occur during dental finishing and polishing such as a dull polished surface with fine scratches, overthinning of connectors, nicks or notches in clasps, and distorted frameworks. It recommends following finishing steps in order, completing each step before moving to the next, using the correct wax thickness during wax-up, and taking care when using stones, burs, lathes, and polishing wheels to avoid damaging the framework.
Polished surface is dull Sequence of finishing Follow steps as outline; do with fine scratches steps not followed not jump steps
Steps not carried to Complete each step before
completion before proceeding to next one proceeding to next step Major or minor connector Casting too thin as a result Use correct gauge of wax overthinned and flexible of incorrect wax-up during wax-up; do not flame with alcohol torch Framework overthinned with abrasive stones Use care when finishing during finishing connectors to avoid overthinning; check frequently during finishing Clasp is nicked or Clasp was miscast Use correct wax thickness notched on pattern Clasp was nicked with stone or bur during Take care to avoid nicking finishing framework with bur or wheel Framework distorted Framework caught in Take care when using lathe during finishing lathe to prevent framework from being caught in polishing wheel