Professional Documents
Culture Documents
KLAUS P310 - 3 Level Puzzle
KLAUS P310 - 3 Level Puzzle
55
- Free Suitable for
spaces
OG (upper floor) Standard passenger cars
Page 4 According to clearance and maximal
- Function surface load
- Load plan
Standard
Page 5 Width 190 cm 4
- Electrical Weight max. 2000 kg
Detail doors
data
see page 2
EG (ground floor)
- Technical Wheel load max. 500 kg
data
- To be
performed Clearance profile
by the
customer 160 30
45
55
see table
Page 6
- Description
UG (lower floor)
150
0
Grounding 6 0 13
6
100 125
500 (520)
10
2% 2%
40 8 Water drainage 7 25 8
+5
550 0 for vehicle up to 5.00 m = 164 long
+5
(570 0 for vehicle up to 5.20 m = 17 long) 9
405 5
430 5
175
200
230
2 Spare no. 8 These floor areas need to be horizontal and equal level across
3 To follow the minimum finished dimensions, make sure to the full width of the pit.
consider the tolerances, during construction. 9 For convenient use of your parking space and due to the fact
4 Car width for platform width 230 cm. If wider platforms are that the cars keep becoming longer we recommend a pit
used, it is also possible to park wider cars. length of 570 cm.
5 10 At the transition section between pit floor and walls no hollow
If height H is larger, vehicles with the maximum height as
applicable for the EG can be parked on the OG, provided moldings/ coves are possible. If hollow moldings/ coves are
there is free space available on the ceiling. required, the systems must be designed smaller or the pits
accordingly wider.
6 Potential equalization from foundation grounding connection
to system (provided by the customer). If sprinklers are required, make sure to provide the
! necessary free spaces during the planning stage.
Parking Automat P310 | Indian Version 01.2014 Page 2 of 6
Page 2
- Door 13
13 13 25
- Width 25 25
dimensions
H
Page 3
H111
H111
H111
H3
H2
H2
H2
- Width
dimensions
- Approach
30
- Free
spaces
PD
PD
PD
Page 4
- Function
- Load plan
550 (570) 550 (570) 550 (570)
Page 5
- Electrical
data
Type PD H H1 H2 Type PD H H1 H2 Type PD H H1 H2 H3
P310-175 175 345 170 210 P310-175 175 345 170 220 P310-175 175 345 170 210 220
- Technical
data P310-200 200 405 205 220 P310-200 200 405 205 230 P310-200 200 405 205 220 230
P310-230 230 430 200 220 P310-230 230 430 200 230 P310-230 230 430 200 220 230
- To be
performed
by the
customer Columns per each grid unit Columns per each grid unit Columns per each grid unit
Page 6
- Description Not available
RB RB RB
RB RB RB
(25) 13
10 10
(B2) 20 20
(B2)
B1 B2 B1 B2
no. of grids x RB + 20 no. of grids x RB + 20
Driveway in accordance
Driveway in accordance
with local regulations
with local regulations
Columns every second grid unit Columns every second grid unit Columns every second grid unit
RB RB RB RB RB RB RB RB
RB RB RB RB
(25) 13
10 10 10
(B4) 20
(B4) 20 B3 B4 20
(B4)
B3 B4 no. of grids x RB + 20
Driveway in accordance B3 B4
no. of grids x RB + 20
with local regulations no. of grids x RB + 20
Driveway in accordance
with local regulations Driveway in accordance
with local regulations
End parking spaces are generally more difficult to drive into. Therefore, we recommend our wider platforms for end parking spaces. Parking
! larger vehicles on standard width platforms may make getting into and out of the vehicle difficult. This depends on the type of the vehicle,
approach and above all, on the drivers skill.
Page 2
- Door
15 70
- Width RB RB RB
35
dimensions
Page 3 10
- Width
H
dimensions
H1 11
- Approach
H2
- Free 20 20 20 20
spaces
30
B5 B5
Page 4 no. of grids x RB + 20
35 Driveways in accordance
PD
- Function
with local regulations
- Load plan
Page 5
550 (570)
- Electrical
data
- Technical
Usable platform width RB 12 B5
data 220 240 220
- To be
Roll door 230 250 230
performed Type PD H H1 H2 height 240 260 240
by the P310-175 175 345 170 210 263 250 270 250
customer P310-200 200 405 205 220 300 260 280 260
P310-230 230 430 200 220 300 270 290 270
Page 6
- Description
End parking spaces are generally more difficult to drive into. Therefore, we recommend our wider platforms for end parking spaces. Parking
! larger vehicles on standard width platforms may make getting into and out of the vehicle difficult. This depends on the type of the vehicle,
approach and above all, on the drivers skill.
Approach
!
Maximum
descending Maximum
slope 3% ascending
slope 5%
The illustrated maximum approach angles must not be exceeded. Incorrect approach angles will cause serious maneuvering
! and positioning problems on the parking system for which the local agency of KLAUS Multiparking accepts no responsibility.
10 RB 12 RB RB RB
Logitudinal
free space
45
20
Empty
space Entrance level
Entrance level
- Door
OG 1 3 6 1 3 6 1 3 6
- Width
dimensions
Page 3 EG 4 7 4 7 4 7 8
- Width
dimensions
- Approach UG 2 5 8 2 5 8 2 5
- Free
spaces
Page 4
- Function For driving the vehicle off platform The empty space is now above the The vehicle on platform no. 8 can
- Load plan No. 8 the ground floor parking vehicle which shall be driven off now be driven off the platform.
platforms are shifted to the left. platform. Platform no. 8 will be lifted.
Page 5
- Electrical
data Load plan
- Technical
data P310-175 P310-200 P310-230
- To be
performed
by the
customer F1 F1 F1
F6 F6 F6
H3
Page 6
H3
H3
- Description
H
F1
F1
H
H4
F1
185
H4
F6 F1
H4
185
F1F2
F1 F2
185
F7 F1 F2
F7 F1 F2
165
PD
140
F7
F3 F4 F5 F8 F9
165
190
PD
195
F3 F4 F5
220
PD
F8 F9
6 6 F3 F4 F5 F8 F9
550 (570)
6 6
550 (570)
6 6
550 (570)
Type PD H H3 H4 Type PD H H3 H4 Type PD H H3 H4
P310-175 175 345 150 260 P310-200 200 405 185 295 P310-230 230 430 185 295
F3 F4 F5 F4 F5 F4 F5 F4 F5 F4 F3
F2 F1 F2 F1 F2 F1 F2 F1 F2 F1 F2
F6 F7 F6 F7 F6 F7 F6 F7 F6 F7 F6 F7
F8 F9 F9 F9 F9 F8
RB1 RB RB RB RB1
The system is doweled to floor and walls. The drilling depth in the floor is approx. 15 cm. The drilling depth in the walls is approx. 12 cm.
! Floor and walls are to be made of concrete (grade of concrete min. C20/25)
The dimensions for the points of support are rounded values. If the exact position is required, please contact KLAUS Multiparking.
Page 1
Electrical data
- Section
- Dimensions
Control box Electrical supply to the control box/Foundation earth
- Car data
connector
The control box must be accessible at all times from outside.
Page 2 3 phase, 415 VAC (10%), 50 Hz (2%), 4 wire (3 PH + N + PE)
- Door Dimensions approx. 100 x 100 x 30 cm.
electrical supply to the control box through a 4 pole RCBO (or MCB +
- Width Cutting through of wall from control box to parking system (contact the ELCB), 25 Amp. IDN (sensitivity/leakage current)100 mA.
dimensions local agency of KLAUS Multiparking for clarification).
Supply line cable 5 x 4.0 mm2, copper (3 PH + N + PE) with marked
Page 3 wire and protective conductor. Local regulations must be taken into
- Width consideration.
dimensions
- Approach Electrical supply to the control box must be provided by the customer
- Free during installation. The functionality can be monitored on site by our
spaces Cutting through fitters together with the electrician. If this cannot be done during
installation for some reason for which the customer is responsible, the
Page 4 customer must commission an electrician at his own expense and risk.
- Function
Safety of machinery, electrical equipment, grounding of the steel
- Load plan
structure is necessary, provided by the customer (distance between
Page 5
grounding max. 10 m).
- Electrical
data Operating device
- Technical
data Easy-to-survey positioning (e.g. on column).
- To be Parking system fully visible Protection against unauthorized use.
performed
by the from control box May also be recessed in wall if required.
customer
Page 6
- Description
Technical data
Field of application Numbering
Generally parking system is suitable for the same car length for which Standard numbering of the parking spaces:
the wheel-stop is adjusted at the time of installation. In case different
car is to be parked, wheel-stop adjustment confirmation from KLAUS 1 3 6 9
Multiparking shall be required.
Empty 4 7 10 Entrance level
Care space
Page 1 Description
- Section
- Dimensions General description Drive unit of transversely movable platforms on the ground
- Car data floor (EG)
KLAUS Multiparking System provides independent parking spaces for
Page 2 cars, one on top of the other and side by side. - Gear motor with chain wheel
- Door
Dimensions are in accordance with the underlying dimensions of - Chains
- Width
dimensions
parking pit, height and width. - Running and guide rollers (low-noise)
The parking bays are accessed horizontally. - Power supply via cable
Page 3
- Width Along the complete width of the Parking Automat, an approach lane
dimensions (during lane in accordance with local regulations) must be available.
- Approach Parking spaces are arranged on three different levels, one level on top Hydraulic unit consists of
- Free of the other. - Hydraulic power unit (low-noise, installed onto a console with a
spaces
The platforms of both the lower floor (UG) and upper floor (OG) are metal mounting)
Page 4 moved vertically, the platforms of the ground floor (EG) horizontally. At - Hydraulic oil reservoir
- Function
approach level (EG) there is always one parking space less available.
This vacant space is used for shifting the ground floor (EG) parking - Oil filling
- Load plan
spaces sideways, thus enabling an upper floor (OG) parking space or - Internal geared wheel pump
Page 5 lower floor (UG) parking space to be lowered or lifted to approach
level. Consequently, a unit of five parking spaces (2 on the upper floor, - 3-phase-AC-motor (3.0 kW, 415 VAC, 50 Hz)
- Electrical
data 1 on the ground floor, 2 on the lower floor) is the smallest unit available - Pressure gauge
- Technical for this parking system. - Pressure relief valve
data
The Parking Automat P310 allows parking of passenger cars and - Hydraulic hoses
- To be
performed station wagons.
by the
customer
For safety reasons, it is recommended to install safety doors at the
entrance. Control system
Page 6
- Central operator panel (operating device ) used to select the desired
- Description
A steel framework mounted inside the pit consists of parking space.
- Supports - With series installation, the doors are opened manually.
- Steel pillars with sliding platform supports - Electric wiring is made from the electric cabinet by the manufacturer.
- Cross and longitudinal members
- Running rails for the transversely movable ground floor (EG) platform Laterally movable doors
Size
Platforms consist of
Sliding door, dimensions: approx. 2500 mm x 2000 mm
- Side members
(width x height).
- Cross members
Frame
- Platform base sections
- Frame construction with vertical centre stay made from extruded
- 1 wheel-stop (on the left per parking space) aluminium sections.
- Screws, small parts, etc. Safety doors
Doors and door suspensions are not included in the standard version
Lifting device for upper floor (OG) and lower floor (UG) but can be delivered at additional cost as special equipment.
platforms
Door actuation
- Hydraulic cylinder with solenoid valve - Manually, i.e. the door is opened and closed by hand
- Chain wheel For safety reasons the movement of the platforms as always mode
- Chains behind locked doors.
- Limit switches Door rails
- The platforms are suspended on four points and guided along the - The running gear of each door consists of 2 twin-pair rolling gadgets,
supports using plastic sliding bearings. adjustable in height
- The running rails of the doors are fixed to brackets or the concrete
lintel, or on a building-specific door suspension using ceiling fittings
- The guide consists of 2 plastic rollers mounted to a base late, which is
doweled to the floor