Professional Documents
Culture Documents
Diseño Por Flexión
Diseño Por Flexión
07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
Design Standard:
AASHTO LRFD 6th Edition, 2012
No Interim Revisions
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
Live Load Distribution Factors were not calculated since the option was not selected in the design
request.
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
2. Demands
Design Standard:
AASHTO LRFD 6th Edition, 2012
No Interim Revisions
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
3. Resistance
Design Standard:
AASHTO LRFD 6th Edition, 2012
No Interim Revisions
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
Prestressing factor
245
= 2 (1.04 ) = 2 (1.04 270) = 0.264 LRFD eq. 5.7.3.1.1-2
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
1 = 0.85 ( 4.0) 0.05 = 0.85 (4.0 4.0) 0.05 = 0.85 LRFD sec. 6.7.2.2
Assume rectangular section behavior and yielding of tension reinforcement; the compression
reinforcement is ignored. Calculate distance between neutral axis and the compressive face
14.4
14.4
= (1 ) = 270.1 (1 0.264 67.7) = 254.9 LRFD eq. 5.7.3.1.1.-1
Flexural resistance
1 1
= ( ( ) + ( )
2 2
1
+ 0.85 ( ; 0) ( )) =
2 2
14.4 0.85 14.4 0.85
0.9 (10.097 254.9 (67.7 ) + 0.800 60.0 (70.9 ) + 0.85 4.0
2 2
14.4 0.85 7.9
(63.2 0.0; 0) 7.9 ( )) = 145442
2 2
= 12120
LRFD eq. 5.7.3.2.2-1
Left Exterior Girder Demand over Capacity Ratio for Positive Flexure
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
9413
= = = .
12120
O.K
Assume rectangular section behavior and yielding of tension reinforcement; the compression
reinforcement is ignored. Calculate distance between neutral axis and the compressive face
0.6
0.6
= (1 ) = 0.0 (1 0.00 0.0) = 0.0 LRFD eq. 5.7.3.1.1.-1
Flexural resistance
1 1
= ( ( ) + ( )) =
2 2
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
0.60.75 0.60.75
0.9 (0.000 0.0 (0.0 )+ 0.400 60.02 (76.9 )) = 1656 =
2 2
138 LRFD eq. 5.7.3.2.2-1
Left Exterior Girder Demand over Capacity Ratio for Negative Flexure
34
= = = .
138
O.K
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
4. Summary Tables
Design Standard:
AASHTO LRFD 6th Edition, 2012
No Interim Revisions
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
Legend:
b Slab - Tributary width of the composite slab.
h Slab - Equivalent thickness of the composite slab.
bf Top - Precast beam top flange width.
hf Top - Precast beam top flange thickness.
bw - Precast beam web width.
bf Bot - Precast beam bottom flange width.
hf Bot - Precast beam bottom flange thickness.
h Girder - Depth of the girder (beam plus slab).
CG Top - Distance from centroid of composite section to the topmost point of the bridge section.
CG Bot - Distance from centroid of composite section to the bottommost point of the bridge section.
f'c Slab - Composite slab concrete strength.
f'c Beam - Precast beam concrete strength.
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
Legend:
Aps Neg - Area of top prestress tendons.
Aps Pos - Area of bottom prestress tendons.
dp Neg - Distance from the bottom fiber to the centroid of those tendons that are located above the
bottom compression zone.
dp Pos - Distance from the top fiber to the centroid of those tendons that are located below the top
compression zone.
As Neg - Area of top reinforcement.
As Pos - Area of bottom reinforcement.
ds Neg - Distance from the bottom fiber to the centroid of those rebars that are located above the
bottom compression zone.
ds Pos - Distance from the top fiber to the centroid of those rebars that are located below the top
compression zone.
fpu Neg - Specified tensile strength of top prestress tendons (weighted average).
fpu Pos - Specified tensile strength of bottom prestress tendons (weighted average).
fys - Yield strength of longitudinal rebar.
fs Neg - Stress in longitudinal rebar located in tensile zone for negative moment.
fs Pos - Stress in longitudinal rebar located in tensile zone for positive moment.
k Neg - Factor k per eq. 5.7.3.1.1-2 top.
k Pos - Factor k per eq. 5.7.3.1.1-2 bottom.
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
Legend:
TSect Pos - Is section T section for positive moment?
TSect Neg - Is section T section for negative moment?
Beta1 Pos - Stress block factor per 5.7.2.2 for positive moment.
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
Beta1 Neg - Stress block factor per 5.7.2.2 for negative moment.
c Pos - Distance from the extreme compression fiber to the neutral axis for positive moment.
c Neg - Distance from the extreme compression fiber to the neutral axis for negative moment.
a Pos - Depth of the equivalent compression stress block for positive moment.
a Neg - Depth of the equivalent compression stress block for negative moment.
a Loc Pos - Extend of equivalent compression stress block for positive moment
a Loc Neg - Extend of equivalent compression stress block for positive moment
fps Pos - Average stress in the prestressing steel at nominal bending resistance for positive moment (eq.
5.7.3.1.1-1).
fps Neg - Average stress in the prestressing steel at nominal bending resistance for negative moment
(eq. 5.7.3.1.1-1).
Designer: ___; Date: ago. 07 2017
Project: _______________ Checker: ___; Date: ago. 07 2017
Item: Superstructure Ultimate Flexure Design; Request Name: Flexure
Section Cut No. 24; Station: 65.617ft; Location: Before; Left Exterior Girder
Legend:
LLDF Mom - Live load distribution factor for moment.
- Resistance factor.
Mr Pos - Factored resistance for positive bending.
Mu Pos - Controlling positive bending demand moment.
Combo Pos - Name of combination that controls positive moment demand.
Dem Set Pos - Name of demand set that controls positive moment demand.
Mr Neg - Factored resistance for negative bending.
Mu Neg - Controlling negative bending demand moment.
Combo Neg - Name of combination that controls negative moment demand.
Dem Set Neg - Name of demand set that controls negative moment demand.