How to make an origami crane.

A
1. Start with a square piece 7. Reestablish creases. Now think
of paper wish on one side, of your paper as having four smaller
blank on the other side. diamonds within the one bigger
diamond. Place your thumbs on
top of point C diamond. Place D B
DB
your index fingers on the other
side of the paper under the middle
crease in point B diamond and the
2. Lay the paper down flat in front middle crease in point D diamond, C
of you wish side facing down. guiding both points down to meet
Take the bottom right corner and A
point C then crease sides. Now
fold the paper diagonally to form collapse point A down onto points
a triangle. Unfold the paper. B, D, and C, resulting in a small,
DB
compact diamond.

3. Take the bottom left corner and A

now fold the paper diagonally the
opposite way. Unfold the paper
again, and turn it over so that the
DB
wish side is facing up.
C

8. Make sure that the open corner

is on the bottom. Also, make sure
that the upper left and upper right
sides of your diamond are creased. A

DB
4. Fold the paper in half,
C
bringing the bottom half of
the paper up to meet the top
half. Unfold the paper. E
9. Take the right top layer of your
diamond (point F) and fold it
inward, so that the right side
H F
5. Fold the paper in half the other now lies next to the crease in the J I
way, bringing the right side of middle. Take the left top layer of
the paper over the left side of the your diamond (point H) and fold
G
paper. Unfold the paper again, it inward as well, making sure
but do not flatten it. that the left side is now adjacent E
to the right side. Points F and
H should be touching in the H F
center of your diamond.
J I

6. Making sure that the wish side A

is facing up, lay the paper in front downward downward

G
of you. Position the paper like a crease crease
diamond, not a square. E
D B 10. Flip your paper over and repeat
step 9 so that points I and J are
touching in the center. You should I J
now have a kite shape in front of you.
C

G
How to make an origami crane. (contd.)
11. Take the top corner of your kite
(point E) and fold it down and back
up, creating a crease where points
I and J meet. Turn your kite over
and crease the other way.
12.
folded in steps 9-11 and grab the
bottom corner (point G), but ONLY
the top layer of paper. Pull the corner
upward and crease so that the crease
you made in step 11 is reestablished
it will look like an open birds beak.
13. Holding your bird beak wide
open, and using the creases you
just made in steps 9-12, fold the
right and left sides of the beak
inward and crease. Push the beak
backwards and crease so that it now
touching in the center of the beak.
symmetrical diamond shape.
14. Turn your paper over and repeat
step 13. You should now have a
symmetrical diamond shape in front
of you. There should be two legs
at the bottom of your diamond.
(They are actually the neck and tail.)
15. Just as you did in steps 9-11, take
the right top layer (point L) and fold
it inward so that the right side now
lies next to the crease in the middle.
Take the left top layer (point K) and
fold it inward as well, so that points
K and L are touching in the center
of your kite.
16. Flip your paper over and repeat
step 15 so that points M and N are
touching. You should now have a
skinny kite shape.
E
G G G
17. Take the right leg and fold it up
all the way on an outward diagonal.
I J
Unfold it and return it to its original
position. Do the same to the left leg.
E
18. Turn your crane so that you are G G G
looking at it from the side (it should G
I J
the crease you made in step 17, fold
G the leg up as far as it can fold. Turn
your paper over and do the same
to the other leg. Now close the leg,
G G bringing points O and P together.
Do the same to the other side.
G G G
I J
I J
O P
G 19. Now turn your crane so that you G G
can see one leg sticking out of the
top right side and the other leg
sticking out of the top left side. To
K L create the neck, take the right leg
tip and gently pull it outward until
it reaches 45 degrees. Then pinch
and crease at the base of the neck.
To create the tail, take the left leg
tip and gently pull it outward until it
reaches 45 degrees. Then pinch and
G G
crease at the base of the tail.
20. To create the head, grab the
KL neck about of an inch from the pinch
K L M N
top. Push the top of the neck down
so the crease folds the opposite
way. Pinch the paper together so
that you make a crease where the
head meets the neck.
G G
21. Take one wing and fold it down
of the way. Do the same to the
other wing. Open the body by
NM
N M
blowing into the underside cavity
then gently pulling out the wings.
2009 Millennium Pharmaceuticals, Inc. All rights reserved. CC0102 (A-1)