Professional Documents
Culture Documents
KeySight - Oscilloscope Quick Setup Tips Poster
KeySight - Oscilloscope Quick Setup Tips Poster
Position (smaller knob for each input channel): cycles of the waveform. Level (knob): Set the voltage value on the
waveform for triggering.
Control up and down position of waveform.
Keysight InfiniiVision X-Series Oscilloscope Auto Mode: Capture waveforms with or without a trigger
event occurring.
Run controls
Scale (larger knob): Control width of waveforms in
units of seconds/division.
Position (smaller knob): Control left and right
position of waveform.
Zoom : Show expanded view of waveforms.
Run: Capture waveforms continuously.
Download the Oscilloscope Lab Guide/Tutorial and Oscilloscope Fundamentals slide set at
This information is subject to change without notice.
www.keysight.com/find/edk Keysight Technologies, 2014 - 2017, Published in USA, January 23, 2017
5990-8694EN
www.keysight.com