Professional Documents
Culture Documents
The Only Non-Combustible Composite Panel
The Only Non-Combustible Composite Panel
Range of products
One-side stove-lacquered Dimensional tolerances
Thickness 4 mm (3 mm*) Thickness 0.2 mm
Width 1 250 mm Width -0 / +4 mm
1 500 mm Lengths 1 0004 000 mm -0 / +6 mm
Length up to 8 000 mm Lengths 4 0018 000 mm -0 / +10 mm Platzhalter
*Special sizes on request
y
an
USA UBC 17-5 passed
rm
Ge
ASTM E-84 UBC Class I
in
ALCAN COMPOSITES
ed
ASTM D-2015 509 BTU/Ib
in t
Alcan Singen GmbH
Pr
A2
78221 Singen
ND
Germany
BO
CO
composites@alcan.com
01
THE ONLY NON-COMBUSTIBLE ALUMINIUM COMPOSITE PANEL USED IN ARCHITECTURE WORLD-WIDE
non-combustible
23 mm non-combustible
mineral-filled core
More than ever before, innovative and sustainable materials are in con- ALUCOBOND A2 composite panels are not inflammable and do not actively contribute to com-
stant demand for realizing the creative visions of successful architects bustion. During the life cycle of ALUCOBOND A2 composite panels, no environmentally hazardous
and designers. The buildings of the future do not only have to comply substances are set free at any time and no toxic fumes are developed in the case of fire.
with the highest demands on design; they also have to meet the latest Wind load and permissible panel sizes
technical requirements: sustainability, energy efficiency, noise protection,
fire protection, etc. With the ALUCOBOND A2 aluminium composite The graphs for 3 mm and 4 mm thick ALUCOBOND A2 indicate the maximum permissible panel
panels, ALCAN COMPOSITES offers a building material that combines a The advantages of ALUCOBOND A2 length (without need for stiffeners) based on the applicable design wind load and panel width
creative appearance and the ultimate technological demands in the best (permissible stress = 51 N/mm). The values apply to panels supported on four sides. Values for
possible way. Lightweight, flexural strength, perfect flatness low cost for substructures other systems on request.
and fasteners, smooth handling on site
3 mm 4 mm
Long life span weatherproof, easy to clean 2.2 2.2
Panel width Panel width
2.0 2.0
ALUCOBOND A2 is the only non-combustible aluminium composite panel used Noise and vibration-damping no additional sound-damping needed
1.8 1.8
in architecture world-wide. Due to its mineral-filled core ALUCOBOND A2 625 mm
Simple processing can easily be folded and bent using common tools 1.6 1.6
meets the highest requirements of the fire regulations and is therefore the 1.4 1.4
ideal material for all areas where fire protection plays an important role Large panel sizes, fast installation, pre-fabricated panels short construction
1.2 750 mm 1.2
be it for high-rise or industrial buildings, public buildings, hospitals, hotels, times, adherence to schedules, low cost
1.0 1.0 1 000 mm
tunnels or underground stations. Furthermore, with its proven product and Wide range of colours unlimited planning and design 1 000 mm
23 mm non-combustible
mineral-filled core
More than ever before, innovative and sustainable materials are in con- ALUCOBOND A2 composite panels are not inflammable and do not actively contribute to com-
stant demand for realizing the creative visions of successful architects bustion. During the life cycle of ALUCOBOND A2 composite panels, no environmentally hazardous
and designers. The buildings of the future do not only have to comply substances are set free at any time and no toxic fumes are developed in the case of fire.
with the highest demands on design; they also have to meet the latest Wind load and permissible panel sizes
technical requirements: sustainability, energy efficiency, noise protection,
fire protection, etc. With the ALUCOBOND A2 aluminium composite The graphs for 3 mm and 4 mm thick ALUCOBOND A2 indicate the maximum permissible panel
panels, ALCAN COMPOSITES offers a building material that combines a The advantages of ALUCOBOND A2 length (without need for stiffeners) based on the applicable design wind load and panel width
creative appearance and the ultimate technological demands in the best (permissible stress = 51 N/mm). The values apply to panels supported on four sides. Values for
possible way. Lightweight, flexural strength, perfect flatness low cost for substructures other systems on request.
and fasteners, smooth handling on site
3 mm 4 mm
Long life span weatherproof, easy to clean 2.2 2.2
Panel width Panel width
2.0 2.0
ALUCOBOND A2 is the only non-combustible aluminium composite panel used Noise and vibration-damping no additional sound-damping needed
1.8 1.8
in architecture world-wide. Due to its mineral-filled core ALUCOBOND A2 625 mm
Simple processing can easily be folded and bent using common tools 1.6 1.6
meets the highest requirements of the fire regulations and is therefore the 1.4 1.4
ideal material for all areas where fire protection plays an important role Large panel sizes, fast installation, pre-fabricated panels short construction
1.2 750 mm 1.2
be it for high-rise or industrial buildings, public buildings, hospitals, hotels, times, adherence to schedules, low cost
1.0 1.0 1 000 mm
tunnels or underground stations. Furthermore, with its proven product and Wide range of colours unlimited planning and design 1 000 mm
23 mm non-combustible
mineral-filled core
More than ever before, innovative and sustainable materials are in con- ALUCOBOND A2 composite panels are not inflammable and do not actively contribute to com-
stant demand for realizing the creative visions of successful architects bustion. During the life cycle of ALUCOBOND A2 composite panels, no environmentally hazardous
and designers. The buildings of the future do not only have to comply substances are set free at any time and no toxic fumes are developed in the case of fire.
with the highest demands on design; they also have to meet the latest Wind load and permissible panel sizes
technical requirements: sustainability, energy efficiency, noise protection,
fire protection, etc. With the ALUCOBOND A2 aluminium composite The graphs for 3 mm and 4 mm thick ALUCOBOND A2 indicate the maximum permissible panel
panels, ALCAN COMPOSITES offers a building material that combines a The advantages of ALUCOBOND A2 length (without need for stiffeners) based on the applicable design wind load and panel width
creative appearance and the ultimate technological demands in the best (permissible stress = 51 N/mm). The values apply to panels supported on four sides. Values for
possible way. Lightweight, flexural strength, perfect flatness low cost for substructures other systems on request.
and fasteners, smooth handling on site
3 mm 4 mm
Long life span weatherproof, easy to clean 2.2 2.2
Panel width Panel width
2.0 2.0
ALUCOBOND A2 is the only non-combustible aluminium composite panel used Noise and vibration-damping no additional sound-damping needed
1.8 1.8
in architecture world-wide. Due to its mineral-filled core ALUCOBOND A2 625 mm
Simple processing can easily be folded and bent using common tools 1.6 1.6
meets the highest requirements of the fire regulations and is therefore the 1.4 1.4
ideal material for all areas where fire protection plays an important role Large panel sizes, fast installation, pre-fabricated panels short construction
1.2 750 mm 1.2
be it for high-rise or industrial buildings, public buildings, hospitals, hotels, times, adherence to schedules, low cost
1.0 1.0 1 000 mm
tunnels or underground stations. Furthermore, with its proven product and Wide range of colours unlimited planning and design 1 000 mm
Range of products
One-side stove-lacquered Dimensional tolerances
Thickness 4 mm (3 mm*) Thickness 0.2 mm
Width 1 250 mm Width -0 / +4 mm
1 500 mm Lengths 1 0004 000 mm -0 / +6 mm
Length up to 8 000 mm Lengths 4 0018 000 mm -0 / +10 mm Platzhalter
*Special sizes on request
y
an
USA UBC 17-5 passed
rm
Ge
ASTM E-84 UBC Class I
in
ALCAN COMPOSITES
ed
ASTM D-2015 509 BTU/Ib
in t
Alcan Singen GmbH
Pr
A2
78221 Singen
ND
Germany
BO
CO
composites@alcan.com
01
non-combustible non-combustible
Range of products
One-side stove-lacquered Dimensional tolerances
Thickness 4 mm (3 mm*) Thickness 0.2 mm
Width 1 250 mm Width -0 / +4 mm
1 500 mm Lengths 1 0004 000 mm -0 / +6 mm
Length up to 8 000 mm Lengths 4 0018 000 mm -0 / +10 mm Platzhalter
*Special sizes on request
y
an
USA UBC 17-5 passed
rm
Ge
ASTM E-84 UBC Class I
in
ALCAN COMPOSITES
ed
ASTM D-2015 509 BTU/Ib
in t
Alcan Singen GmbH
Pr
A2
78221 Singen
ND
Germany
BO
CO
composites@alcan.com
01