Windshield Washer Pump and 4. WARNING: Windshield washer Reservoir solution contains methanol, which is poisonous. Observe all cautions and warnings Removal and Installation indicated on the label of the washer solution container. 1. Remove the engine air cleaner; refer to Section Disconnect the windshield washer hose from 303-12. the windshield washer pump and plug the outlet of the pump. 2. Remove the windshield wiper reservoir fasteners. 5. Disconnect the coolant overflow hose from the engine coolant overflow reservoir and plug the Remove the two screws and two nuts. outlet of the reservoir.
6. NOTE: Make sure not to damage the rubber
grommet during disassembly. Remove the windshield washer pump.
3. Disconnect the windshield washer reservoir
pump electrical connector.
7. To install, reverse the removal procedure.
Copyright 2003, Ford Motor Company
Last updated: 06/24/2003 2004 Explorer Sport Trac, 9/2003