Professional Documents
Culture Documents
Options B PDF
Options B PDF
Worked example
When 1.00 g of tomato soup was burnt in a food calorimeter containing 100 g water, it raised the temperature of
the water from 20.4 C to 28.0 C. Calculate the energy content of 100 g of tomato soup.
From the equation q = mcT, for 1.00 g of tomato soup, we know that:
m = 100 g
c = 4.18 J g1 K1
T = 28.0 20.4 = 7.6 C (which is 7.6 K, as it is the change in temperature that we are looking at, not the actual
temperature).
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 1
Therefore:
q = 100 4.18 7.6 = 3176.8 J, i.e. 3.18 kJ per 1 g
So, in 100 g of tomato soup, there will be 3.18 100 = 318 kJ.
Examiners tip This method does not account for the heat lost through the
You could also be told the container. The heat capacity of the thermometer and container of
heat capacity of the whole the food calorimeter must also be taken into account to increase
system (water and calorimeter accuracy of the results.
together) and asked to work
out the enthalpy change. In
that case, in the first step you
Test yourself
just multiply the heat capacity 1 Complete combustion of 2.50 g of a snack food raised the
by the temperature change. temperature of 200.0 g of water by 17.9 C. Calculate the energy
value per 100 g of the food.
2 10.0 g of a biscuit was completely combusted in a food
calorimeter. The heat capacity of the whole system was
8.50 kJ C1, and the temperature of the system increased
12.1 C. Calculate the energy value of 100 g of the biscuit.
3 If 100 g of cooked rice contains 530 kJ energy, by how many
degrees Celsius does the water temperature rise when 1 g of
cooked rice is completely burnt in a food calorimeter containing
100 g water?
Learning objectives
B2 Proteins
Draw the general structure of
a 2-amino acid and identify
the different functional groups Structure of amino acids
within the molecule Amino acids are the building blocks (monomers) of which proteins
Describe how amino acids (polypeptides) are made up. There are 20 naturally occurring 2-amino
behave under different pH acids that make up proteins in the body. These link together to form
values chains, and it is the sequence of these 2-amino acids in the chain that
Describe how amino acids join determines the overall structure (and therefore function) of the protein.
together to form peptides These 2-amino acids have a common structure (Figure B1): they consist
Describe the primary, secondary, of a central carbon atom to which are attached four groups:
tertiary and quaternary 1 a carboxylic acid (COOH)
structures of proteins and 2 an amine (NH2)
explain the bonding and 3 a hydrogen (H)
interactions that occur between 4 An R group (this is different in each of the 20 amino acids)
the amino acids within these H
structures
H2N C COOH
Note the different types of
proteins in the human body and R
their function Figure B1 General structure of a 2-amino acid.
2 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
These compounds are called 2-amino acids because the amino group is
on carbon 2, counting the C of the carboxylic acid group as carbon 1. For H O
H
example, the amino acid shown in Figure B2 is called 2-aminoethanoic 2 1
acid. N C C
H O H
H
Acidbase behaviour of 2-amino acids
Amino acids contain both acidic and basic groups in the same molecule amine (amino) carboxylic
group acid
they are thus amphoteric.
Figure B2 Diagram showing the numbering
Amines can accept a proton:
on the C atoms in an amino acid.
RNH2 + H+ RNH3+
The central carbon atom is also
Carboxylic acids can donate a proton:
sometimes referred to as an
RCOOH RCOO + H+ -carbon, as it is next to (known
as to) a carboxylic acid group.
The carboxylic acid group can protonate an amino group in the same Therefore in some texts, 2-amino
molecule. When the proton is transferred from the COOH to the NH2, a acids are called -amino acids.
neutral ion is formed, as it bears no net charge, and this neutral form of
the amino acid is known as a zwitterion (Figure B3).
H O H O
H transfer of proton
H
N C C H N+ C C
The word zwitterion comes
H O H H O
R R from the German word for
zwitterion hermaphrodite.
Figure B3 Formation of a zwitterion.
H H H
R R R
cation zwitterion anion
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 3
A buffer solution is one that resists
Amino acids can act as buffers
changes in pH when small amounts We mentioned above that amino acids are amphoteric, i.e. they contain both
of acids and alkalis are added. acidic and basic groups and can therefore act as either an acid or a base.This
is an important property of amino acids, as it allows them to act as buffers.
The key reason that the buffering occurs is that the amino acids have
The full explanation is a bit groups that can react with H+ or OH. Any acid (H+) added is mopped
more complicated than this, and up by either the COO or NH2 groups (depending on the pH) and any
the various species present in base (OH) added is mopped up by reaction with the COOH or NH3+
equilibrium must be considered. groups. It is, therefore, possible for the pH to remain fairly constant.
Amino acids play an important role in buffering the aqueous
environment within cells. Significant changes in cellular pH can have a
Examiners tip disastrous effect on the biochemical reactions that take place there, as they
Buffer solutions are not part prevent enzymes, which usually only work within narrow pH ranges, from
of the core Standard Level carrying out their catalytic activity. Proteins may also change shape in low
syllabus, but if you would like or high pH and thus lose their function.
to learn a bit more about them,
they are covered in the Higher Types of amino acid
Level section of Chapter 8 on There are 20 naturally occurring 2-amino acids and therefore 20 different
page 359 of the Coursebook. R groups. The simplest 2-amino acid is called glycine (abbreviated to
Gly), where R = H. The other 19 amino acids can be grouped according
to whether their R group is neutral, acidic or basic.
The systematic name of glycine is
2-aminoethanoic acid, and we have HL Extension
seen it already in Figure B2. All the 2-amino acids except glycine are optically active, as they possess a
chiral centre.
Structure of proteins
Proteins are chains of amino acids linked together. There are estimated to
be approximately a million different proteins in the body, and these differ
only in the number and sequence of amino acids in their chains. As
we shall see, the sequence of amino acids determines the overall structure
(and therefore function) of the protein; it allows the protein to exist in a
particular shape, this shape being maintained by bonds and forces between
the different amino acids in the chain.
4 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
H H
Condensation reaction: two
H2N C COOH + H2N C COOH
molecules join together with the
R R elimination of water.
H O H
R H R
peptide
bond
Figure B5 Condensation reaction between two amino acids to form a dipeptide and
water.
The amide functional group is:
O
A covalent bond is formed as the carboxyl end of one amino acid reacts
with the amino end of the other amino acid, and a molecule of water is C
lost (hence the term condensation reaction). The group that links the N
two amino acids is an amide, and this linkage is called a peptide bond
H
in proteins.
When two different 2-amino acids react together, two different
dipeptides can be formed (Figure B6).
H H H O H
H H H O H
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 5
H O H H
R H R R
H O H O H
R H R H R
peptide peptide
bond bond
Figure B7 Condensation reaction between a dipeptide and an amino acid to form a
tripeptide and water.
The -helix
The -helix is a helix that twists in a clockwise direction, with each
complete turn consisting of 3.6 amino acids it can be likened to
a corkscrew. The helical structure is stabilised (i.e. held in shape) by
O
H hydrogen bonds
N
C
C
N H
R
H
O R R
H
O H O H
O C H C H C H
C N C N C
N C N C N
C C H C H C
R H O H O
H
R R R R R
O H O H
O H C H C H
H C C N C N
N N C N C
C C H C H C
C R
H H O H O
R R R
R
a -helix (only some b -pleated sheet
of the amino acids have
been shown)
6 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
hydrogen bonds between the carbonyl C=O of one peptide bond and
the NH of the peptide bond four amino acids below it. These hydrogen
bonds are known as intramolecular hydrogen bonds, as they exist
between atoms within the same peptide chain.
Tyr
H2C
Val
CH
H3 C CH3
hydrogen O van der Waals
bonding interactions
H+ H 3C CH3
N CH
HN Val
Lys
H2C His
Cys
CH2
S disulfide
bridge
S +NH3
O O
CH2 ionic bonding
Cys
CH2
Asp
Figure B10 The different types of interactions that can occur between some amino
acids in the peptide chain.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 7
Quaternary structure of proteins
Many proteins are made up of more than one polypeptide chain. These
chains are referred to as polypeptide sub-units and associate in a specific
manner this is known as the quaternary structure.
The sub-units may be held together by various intermolecular
interactions (i.e. interactions between groups in different protein chains),
including hydrogen bonds, ionic interactions, van der Waals forces and
disulfide bonds. Proteins made up of two sub-units are known as dimers,
those with three sub-units are called trimers and those with four sub-
units are known as tetramers. The sub-units may be identical to each
other or may be different in structure.
Examples of tetramers containing two types of sub-units are
haemoglobin and immunoglobulin G, an antibody with wide
immunological action in the body.
Functions of proteins
Proteins serve a variety of functions in the body. These are summarised in
Table B1.
Analysis of proteins
There are various analytical techniques that can be used to identify
proteins and amino acids. Here we will focus on two: paper
chromatography and electrophoresis.
Paper chromatography
This is a simple method for identifying the composition of amino acids in
a particular protein.
The protein must first be broken down into its constituent amino acids,
and this is usually carried out by the addition of acid, such as heating
8 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
with 6 mol dm3 HCl. The acid hydrolyses the protein by breaking
the peptide bonds between the amino acids. A small sample of the
resultant mixture of amino acids can then be spotted onto a piece of
chromatographic paper and separated by placing the paper into a tank
containing a suitable solvent (Figure B11).
tank
6.7cm
3.9cm
pencil line
The solvent rises up the paper by capillary action and, as it does so,
the amino acids travel up the paper. The extent to which each amino
acid travels up the paper is dependent on how it partitions between the
stationary phase (the water in the chromatographic paper) and the mobile
phase (the solvent), and this is dependent on its relative solubility in each
of the two phases. For example, if an amino acid is more soluble in the
water (stationary) phase than the solvent (mobile) phase, it will travel less
distance up the paper than if it was more soluble in the solvent phase.
If the amino acid is highly soluble in the mobile phase, then it will rise
higher up the paper.
Once the solvent has risen to almost the top of the paper, the paper is
removed from the tank. It is important to mark the distance travelled by
the solvent front as soon as the paper is removed, so that the retardation
factor (Rf) can be calculated. Before the Rf values can be determined,
the paper must be sprayed with ninhydrin (a locating agent) this colours
the amino acids purple and allows them to be visualised. Each amino acid
appears as a small spot on the paper.
The next step is to measure how far each spot has travelled up the
paper (distance from the pencil line to the middle of the spot) and then
divide this distance by the distance travelled by the solvent front (distance
from original pencil line) this calculation will give you the Rf value for
that particular spot:
Each amino acid has a characteristic Rf value when run under the same
conditions and therefore can be identified by comparing the Rf value of
the spot with the Rf values of known amino acids.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 9
To give an example, in Figure B11, the distance to the top spot is
Examiners tip measured and found to be 6.7 cm; the solvent front has travelled 9.2 cm
If your answer is greater than from the line at which the sample was spotted. Therefore:
1, then you know that you
have gone wrong somewhere. 6.7
Rf = = 0.73
9.2
The Rf value does not have units. Amino acids can also be identified by spotting known amino acids on the
paper alongside the unknown sample if a particular amino acid travels
the same distance up the paper as a known one, it can be identified.
Electrophoresis
Another way of analysing amino acids and proteins is using a technique
called electrophoresis. This technique separates charged molecules based
on their ability to migrate when an electric field is applied to the
system.
Both proteins and amino acids can be analysed using this technique. If
the amino acid composition of a protein is to be investigated, the protein
is first treated with acid (as with paper chromatography) to hydrolyse
the peptide bonds between the amino acids. The sample mixture is then
applied to a support, such as paper or a polymer gel (polyacrylamide is
the most common), which is saturated with a buffer of a certain pH, used
as the conducting liquid. An electric field is applied across the support,
and those amino acids bearing negative charges at the buffer pH migrate
to the positive electrode (anode), whereas those bearing a positive charge
migrate to the negative electrode (cathode). Those amino acids with no
net charge remain stationary. Detection of the amino acids is usually by
staining.
So what dictates the charge found on the amino acid at the buffer
pH? The answer is its isoelectric point. We have already seen that the
isoelectric point is the pH at which the amino acid exists in the neutral
(zwitterion) form (see page 3). Remember that the different amino acids
have different isoelectric points, depending on the R group attached
to the central carbon. If you place an amino acid into a solution at a
pH above its isoelectric point, the amino acid will carry a net negative
charge and move towards the positive electrode; if the amino acid is in a
solution with a pH below its isoelectric point, it will bear a net positive
charge and move towards the negative electrode. Therefore, a mixture of
amino acids can be separated in an electric field at a certain pH due to the
differences in their isoelectric points. Mixtures of whole proteins can also
be separated, most commonly using a polymer gel as the support medium.
Test yourself
4 2-amino acids contain both basic and acidic groups 7 The isoelectric point for alanine is at pH 6.15.
attached to the central carbon. Name the basic group If alanine were placed into a buffer solution of
and the acidic group common to all 2-amino acids. pH 4.0 and an electric field applied, would alanine
5 Draw the tripeptide AlaGlyCys. move towards the anode or cathode?
6 If an amino acid has an Rf value of 0.92, is it likely
to be more soluble in the mobile phase or the
stationary phase?
10 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
B3 Carbohydrates Learning objectives
Carbohydrates are widespread in nature and are, in fact, the most abundant
class of biological molecules. They range from simple sugars, such as
Describe the common structural
features of monosaccharides
glucose and fructose, to more complex carbohydrates, such as starch and and draw the straight-chain and
cellulose. The simplest of the carbohydrates are known as monosaccharides ring-closed forms of glucose and
these can exist on their own or can join together to form polymers fructose
known as polysaccharides.
Describe the different
disaccharides and
Carbohydrates have a number of functions in the human body, polysaccharides that can be
for example: formed through condensation
as an energy source glucose is converted into ATP to drive reactions of monosaccharides
biochemical reactions
Briefly describe the main
as an energy store glucose is polymerised into glycogen and functions of carbohydrates in the
stored for times when blood glucose levels fall and energy is human body
needed
Describe the structural
as a precursor for other biomolecules such as nucleic acids. differences and similarities
between starch and cellulose and
explain why humans are able to
Structure of monosaccharides
digest starch but not cellulose
The smallest monosaccharides contain just three carbons and are known
Briefly describe what the
as trioses. We will, however, concentrate on those monosaccharides that term dietary fibre means and
contain six carbons the hexoses. Examples of hexoses are glucose and discuss why an adequate intake
fructose; both these sugars have the same molecular formula (C6H12O6), is important for health and
but have different structural formulas. They can exist in either the straight prevention of disease
chain form or the cyclic form (Figure B12).
Glucose contains an aldehyde group and is known as an aldose,
whereas fructose contains a ketone group and is known as a ketose sugar. Monosaccharides have the
empirical formula CH2O. They
The ring form of monosaccharides contain a carbonyl group (a
In solution, the straight-chain form of the monosaccharide cyclises into a ketone or aldehyde) and have
ring structure. This happens when the carbon with the double-bonded O at least two hydroxyl (OH)
groups as part of their structure.
aldehyde
H O
1
C CH2OH
2
H C OH C O ketone
3
HO C H HO C H
4
H C OH H C OH
5
H C OH H C OH
6
CH2OH CH2OH
glucose fructose
6
CH2OH
5
O CH2OH CH2OH
H H O
4
H 1 H OH
OH H
OH 3 2
OH H OH
OH H
H OH
Figure B12 Straight chain and ring structures of glucose and fructose.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 11
CH2OH (carbon 1 in glucose) joins to carbon 5 via a bridging O atom. However,
5
O this can happen in two ways, so that when an OH group is formed on
H H
H 1
carbon 1 it can either be on the same side of the ring as the CH2OH
OH H group on carbon 5 (-isomer) or on the opposite side of the ring
OH OH (-isomer) (Figure B13).
H OH
glucose Disaccharides
CH2OH When two monosaccharides join together, they form a disaccharide.This is
5
O an example of a condensation reaction, when two molecules join together
H OH
H 1
with the elimination of water.This results in the formation of a glycosidic
OH H linkage between the two sugars (Figure B14).When the linkage is
OH H
formed between the C1 of an -sugar molecule and the C4 of another sugar
H OH molecule, it is known as an -1,4-glycosidic linkage (or bond).
glucose
Examples of common disaccharides are maltose (one of the products
Figure B13 Structures of -glucose and from the digestion of starch is made up of glucose + glucose), lactose
-glucose. In the -isomer the OH is below
the ring and on the opposite side of the ring
(a major sugar found in milk, which is a disaccharide of
to the CH2OH group; in the -isomer the OH glucose + galactose) and sucrose (common table sugar, made up of
is above the ring and on the same side of glucose + fructose).
the ring as the CH2OH group.
CH2OH CH2OH
O O
H H H H
H H 1
1 4
OH H OH H
OH OH OH OH
H OH H OH
glucose glucose
CH2OH CH2OH
O O
H H H H
H H 1
1 4 +H2O
OH H OH H
OH O OH
1,4 glycosidic
H OH linkage H OH
maltose
Figure B14 The condensation reaction between two glucose monosaccharides to
produce maltose, a disaccharide.
Polysaccharides
Polymers of many monosaccharides joined together are known as
polysaccharides. Examples include starch (polymer of -glucose sugars),
glycogen (polymer of -glucose sugars) and cellulose (polymer of
-glucose sugars). Note that all these polysaccharides are polymers of
glucose.
Plants convert excess glucose into starch for storage, and starch consists
of a mixture of two types of glucose polymers, called -amylose and
amylopectin. -amylose consists of thousands of -glucose units linked
together to form linear, unbranched chains. These glucose units are linked
by -1,4-glycosidic linkages (Figure B15a). Amylopectin is a branched
polymer of -glucose units linked by -1,4 glycosidic linkages and -1,6-
glycosidic linkages at the branch points (Figure B15b). Starch is present
as starch grains within plant cells, and these can be easily seen under a
microscope when stained blue-black using iodine.
12 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
We have digestive enzymes that are able to hydrolyse the -1,4 and
-1,6 linkages within starch, and hence we can break down the starch Certain plants have a high starch
polymers into smaller pieces and eventually into single glucose units, which content within their cells: for
can then be absorbed into the bloodstream and used as an energy source. example, potato tubers, rice grains
Just as plants store their excess glucose in the form of starch, we store and wheat. These are the major
our excess glucose in the form of glycogen. Glycogen bears similarities sources of carbohydrate in the
to the structure of amylopectin, in that it is a branched polymer of human diet.
-glucose units linked by -1,4-glycosidic linkages and -1,6-glycosidic
linkages. It is more highly branched than amylopectin and is stored
as granules within cells in particular, liver and skeletal muscle cells.
Glycogen is digested back into glucose when energy is needed.
Cellulose, found in plant cell walls, is a polysaccharide responsible
for giving structure and strength to plants examples include wood and Note that cellulose is made up of
cotton. It, too, is made up of glucose units, but in this case, the glucose linear chains and is not branched.
units are in the form of -glucose, i.e. the OH is on the same side of the The polymer chains lie side by side
ring as the CH2OH. This means that the glycosidic linkages between the and form many hydrogen bonds
glucose units are also and are known as -1,4-glycosidic linkages (Figure between glucose units within the
B16). chains and between the chains,
The glucose units in cellulose are linked by -1,4-glycosidic linkages; giving the cellulose structure its
we do not possess the enzyme (known as cellulase) that hydrolyses these strength.
linkages, and therefore we (and most other animals) cannot digest cellulose.
CH2OH CH2OH
O O
H H H H
H H
OH H OH H
O 1,6glycosidic
O linkage
H OH H OH
CH2OH CH2OH CH2 CH2OH
O O O O
H H H H H H H H
H H H H
OH H OH H OH H OH H
O O O
1,4glycosidic 1,4glycosidic 1,4glycosidic
linkage linkage linkage
H OH H OH H OH H OH
b amylopectin
Figure B15 Examples of how the glucose units are joined in (a) amylose and (b) amylopectin.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 13
CH2OH H OH CH2OH H OH
1,4glycosidic
O linkage O
H O H H O H
H OH H H OH H
OH H H OH H H
H H O H H
O 1,4glycosidic O
linkage
H OH CH2OH H OH CH2OH
cellulose
Figure B16 Glucose units joined together in cellulose.
Dietary bre
Herbivores such as cows survive
on a diet of cellulose-rich plants Dietary fibre is plant material that we ingest but are not able to digest.
such as grass. These animals have It passes through the gut relatively intact, as we do not possess cellulase
an extensive digestive system enzymes capable of hydrolysing it.
that contains bacteria that secrete There are two types of dietary fibre.
cellulase, and this allows the 1 Insoluble fibre: this includes cellulose, hemicellulose and lignin
breakdown of cellulose into smaller found in plant cell walls. As it passes through the gut, it binds water
units for digestion. and softens and adds bulk to the faeces. Dietary sources include whole
grains (such as wheat), vegetables and beans.
2 Soluble fibre: this includes pectin found in plant cells; sources include
oats, oatbran and beans.
Dietary fibre has been linked to having a beneficial effect on a number of
conditions/diseases:
a high-fibre diet is useful in treating and preventing constipation,
haemorrhoids and diverticulosis (formation of small pouches in the
colon) and may improve some cases of irritable bowel syndrome (IBS)
Crohns disease is a condition caused by inflammation of the bowel
wall; a diet high in fibre is one form of treatment for this condition
a high-fibre diet may help in overcoming obesity, as fibre provides bulk
to a meal yet contains relatively few calories, as it is not digested
soluble fibre has been shown to reduce cholesterol levels by lowering
LDL (see page 21); therefore, a diet rich in soluble fibre has been linked
to having a beneficial effect on reducing the incidence of heart disease
fibre, especially soluble fibre, has been shown to slow the absorption of
glucose and thus lead to a lowering of blood glucose levels; it may thus
lower the risk of developing diabetes mellitus.
Test yourself
8 Is the following sugar an -sugar or a -sugar? 9 A disaccharide is shown below. State the type of
CH2OH reaction that resulted in its formation and name
the linkage between the two rings.
O
H H
H CH2OH CH2OH
OH H
O O
OH OH H H H OH
H H
H OH OH H OH H
OH O H
H OH H OH
14 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
B4 Lipids Learning objectives
The word lipid comes from lipos, the Greek word for fat. There are
various types of lipid in the human body: for example, steroids (e.g.
Compare the structures of
triglycerides, steroids and
cholesterol, a steroid that is abundant in cell membranes and also is a phospholipids
precursor for many steroid hormones), triglycerides (found in fatty
(adipose) tissue and act as an energy store) and phospholipids (found in
Describe the condensation of
glycerol and free fatty acids to a
cell membranes). These three lipids have something in common they triglyceride
are all hydrophobic in nature and thus are not soluble in water; they are,
however, soluble in non-polar or weakly polar organic solvents such as
Explain why fats are higher in
energy than carbohydrates
trichloromethane (CHCl3) and ethoxyethane (CH3CH2OCH2CH3).
Define the term iodine number
and use addition reactions to
Lipids are hydrophobic molecules that contain carbon, hydrogen calculate the number of carbon
and oxygen in various proportions (the predominant atoms carbon double bonds in an
are carbon and hydrogen, and therefore the chains are non- unsaturated fat/oil
polar); some types of lipid can also contain other atoms such as
Describe the structural
phosphorus and nitrogen (in phospholipids). differences between saturated and
unsaturated fatty acids and explain
how the composition of fats is
Triglycerides related to their melting point
Tricglycerides are the most abundant class of lipids and make up the Describe the structures of the
majority of lipids in the diet; fats and oils consist of triglycerides. Fat omega-3 and omega-6 essential
(as triglycerides) is found in cells known as adipocytes, which make up fatty acids and discuss their
adipose (fatty) tissue. Adipose tissue has a number of roles in the body: it importance to health
acts as a major energy reserve; it provides insulation from heat loss through Explain the differences between
the skin; and it insulates, protects and supports organs such as the heart the structures and function of
and kidneys. HDL- and LDL-cholesterol
Fat is an important energy store in the body, as it has a higher energy and outline their role in the
value than carbohydrate or protein. In other words, more energy is development or prevention of
released per gram of fat than per gram of carbohydrate or protein. Energy disease
is obtained from food in a process called cellular respiration. This is where Describe the digestion of
food molecules, such as fat (as fatty acids) and carbohydrates (as glucose) triglycerides
are oxidised by a series of enzyme-catalysed reactions to ultimately Discuss the roles of lipids in the
produce carbon dioxide and water. The carbon atoms in fatty acids are body and their impact on health
less oxidised than in carbohydrates or protein, and thus they are able to and disease
undergo more oxidation, resulting in the release of more energy.
Triglycerides are non-polar, hydrophobic molecules. They are formed
by condensation of three fatty acids with the three alcohol groups of
glycerol (propane-1,2,3-triol) (Figure B17). The functional group formed
is an ester group, and so this reaction can also be called esterification.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 15
removal of water
O
CH2 O H HO C
R
O
CH O H + HO C
R
O
CH2 O H HO C
R
glycerol fatty acids
Triglycerides are not usually made
up of the same fatty acid they
usually contain different fatty acids.
O ester linkages
CH2 O C
R
Examiners tip O
The esterification reaction CH O C
is not on the Standard Level R + 3H2O
O
syllabus. See the Higher Level
CH2 O C
section of Chapter 10 on R
page 471 of the Coursebook triglyceride
for further details of Figure B17 Condensation of glycerol with three fatty acids to form a triglyceride,
esterification. where R, R and R are long-chain hydrocarbons. Each individual reaction is a
condensation reaction and results in the elimination of water.
Fatty acids
Fatty acids contain a long
hydrocarbon chain with a Fatty acids usually contain between 14 and 22 carbon atoms, but fatty
carboxylic acid (COOH) at acids with 16 and 18 carbon atoms are the most common (note that they
one end. They have the general contain an even number of carbon atoms).
formula: CH3(CH2)nCOOH. There are two major types of fatty acids:
1 those that have only carboncarbon single bonds (saturated fatty acids)
2 those that contain one or more carboncarbon double bonds
cis and trans (geometrical) (unsaturated fatty acids). Monounsaturated fatty acids contain only
isomerism is not covered on the one C=C, whereas polyunsaturated fatty acids contain two or more
Standard Level core syllabus. See C=C. The C=C in fatty acids is almost always cis, and this results in a
the Higher Level part of Chapter bend (or kink) in the hydrocarbon chain (Figure B18).
10 on page 487 of the Coursebook
for more detail on this. Iodine number
It is possible to work out the degree of unsaturation, i.e. the number of
double bonds, within a fat or oil, using iodine. Iodine is able to add across
a double bond, as shown in Figure B19. As you can see, one molecule of
iodine reacts with one C=C, so the number of moles of iodine used up
in the reaction with a fat or oil can be equated to the number of double
bonds within the fat or oil molecule. For example, if two moles of iodine
reacted with one mole of fat or oil, then that would indicate that there
were two C=C within the fat or oil molecule.
16 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
HO
CH2 CH2 CH2 CH2 CH2 CH2 CH2 CH2 CH3
C CH2 CH2 CH2 CH2 CH2 CH2 CH2 CH2
O
CH3(CH2)16COOH
stearic acid: saturated fatty acid CH3
CH2
CH2
CH2
CH3(CH2CH=CH)3(CH2)7COOH
linolenic acid: polyunsaturated fatty acid
Figure B18 Examples of saturated and unsaturated fatty acids. All double bonds shown have cis geometry (see Chapter 10, page 489
in the Coursebook).
I I
C C + I2 C C
Figure B19 The addition reaction between iodine and the double bond in an
unsaturated fatty acid.
65 2 = 130
(as the iodine number refers to the number of grams of iodine that reacts
with 100 g of fat/oil).
An iodine number of 130 would suggest that the oil contains a high
degree of polyunsaturated fatty acids such as linolenic acid (which has
three C=C). An animal fat, such as butter, which has a high degree of
saturated fatty acids, has an iodine number of between 25 and 45.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 17
Worked example
Work out the iodine number, given the structural formula of linoleic acid:
CH3(CH2)4(CH=CHCH2)2(CH2)6COOH Mr = 280.4 (Mr for I2 = 253.8)
To work out the iodine number of a known fatty acid, we must look at the number of double bonds in the fatty
acid.
Linoleic acid has two double bonds, and thus two moles of iodine (I2) will react with one mole of linoleic acid.
This means that 280.4 g of linoleic acid would react with 253.8 2, i.e. 507.6 g I2. 100 g of linoleic acid would
therefore react with:
100
507.6 = 181 g I2
280.4
Thus the iodine number for linoleic acid is 181.
18 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
O
6 4 2
C
1
HO 5 3
linoleic acid omega-6 fatty acid
O
6 4 3 1
C
HO 5 2
linolenic acid omega-3 fatty acid
Figure B20 Linoleic acid and linolenic acid, drawn without the bends in the
structures for clarity.
C=C: one C=C at the third carbon starting at the opposite end to the
carboxylic acid, the second at the sixth carbon, and the third at the ninth
carbon. It is thus an omega-3 fatty acid, as the first C=C is at carbon 3.
A diet rich in omega-3 fatty acids has been shown to have several
benefits on health. A regular intake of eicosapentaenoic acid (EPA)
(a longer-chain derivative of linolenic acid found in oily fish such as
salmon) and linolenic acid (found in flax seeds, soybeans and rapeseed
oil) can reduce the risk of heart attacks by lowering LDL-cholesterol (see
below) and triglyceride levels in the bloodstream. Omega-3 essential fatty
acids have also been associated with brain function and are sometimes
included in dietary supplements for pregnant women, to help boost brain
development in the growing fetus.
Trans fats
We have already seen that fats and oils can undergo addition reactions
across the C=C with iodine. Addition reactions may also be used in the
food industry, except this time using hydrogen to add across the C=C
double bonds in the unsaturated fatty acid, thus converting C=C double
bonds to CC single bonds. This results in what are called hydrogenated
fats, which have higher melting points, due to a higher degree of
saturation, and are therefore more solid at room temperature.
Hydrogenated fats were used in margarines and also in many processed
foods, as they prolong shelf-life (see Option F on the CD-ROM, page 7).
However, there is now a move to use alternatives to hydrogenated fats, as
they have been shown to have a negative effect on health. This is due to the
formation of trans fats during the hydrogenation process, in which trans
double bonds are formed in the fatty acid chain. Trans fats are associated
with an increase in the levels of LDL-cholesterol (see later) and thus an
increase in the risk of heart disease.
Digestion of fats
When fats are ingested, they must be broken down into smaller molecules
in order to be absorbed into the body from the intestines. This breakdown
is catalysed by enzymes (e.g. pancreatic lipase), which are secreted into
the intestines.
These enzymes catalyse the hydrolysis of the ester bonds in the
triglycerides into free fatty acids plus glycerol (propane-1,2,3-triol),
which are then absorbed (this is the reverse of the formation reaction
shown in Figure B17). Once absorbed, the fatty acids and glycerol are
reassembled into the triglycerides and transported to their destination.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 19
Because they are hydrophobic (non-polar) molecules, they are poorly
soluble in the aqueous blood plasma and cannot be transported as free
molecules. Therefore they are transported via carriers called lipoproteins.
Lipoproteins play an important role in heart disease, and we shall talk
more about them when we look at the transport of lipids.
Phospholipids
The second major type of lipid in the body is the phospholipids.These
are the main lipids found in cell membranes. A membrane made up of a
bilayer of phospholipids surrounds each cell, and phospholipid membranes
also surround many of the inner structures (called organelles) within the cells.
Phospholipids are similar in structure to triglycerides, in that they
contain two fatty acid chains esterified (ester linkage) to two of the
alcohols of glycerol. However, they also contain a phosphate group,
which has reacted with the third alcohol of glycerol (phosphate ester
linkage). The phosphate also usually undergoes a condensation reaction
with an amino alcohol, for example, choline (Figure B21) to form a
second phosphateester linkage. A phospholipid bearing a choline alcohol
is called phosphatidyl choline (also known as lecithin). Phospholipids
therefore have a polar head (the phosphate ester) and a non-polar tail
(the two fatty acids). This property allows them to form bilayers when
placed in an aqueous environment, as they arrange themselves so that
CH3
H3C N+ CH3
choline CH2
CH2
O
phosphate
O P O
O polar head
fatty
acids
phospholipid
bilayer
phosphatidyl choline
Figure B21 Structure of phosphatidyl choline and a representation of the lipid bilayer.
20 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
the polar head groups are in contact with the water (to form hydrogen
bonds) while the non-polar tails minimise their exposure to the water and
interact with each other in the interior of the bilayer (Figure B21).
Steroids
The third main type of lipids in the body is the steroids. Examples include
cholesterol, the sex steroids (testosterone and oestrogen) and adrenal
hormones (hydrocortisone and aldosterone).
Steroids are hydrophobic (mostly non-polar) molecules, bearing a
common structure, known as the steroid backbone. This is made up
of three six-membered rings (called A, B and C) and a five-membered
ring (called D) fused together. The steroids vary depending on the type
and position of substituents on the steroid backbone. There is also usually
a carboncarbon double bond in either ring A or ring B. Oestrogens
are different to the other steroids, in that they have an aromatic A ring
(benzene ring).
Cholesterol (Figure B22) is a major steroid found in the body. It is
found in cell membranes, where it maintains fluidity of the membrane,
and it is also the precursor of other steroids, such as those mentioned
above, as well as bile acids and vitamin D. Although cholesterol plays an
important role in the body, it can also have a negative effect on health, in
that it can contribute to heart disease.
H3C
CH2
CH3 CH CH2
CH2 CH3
CH
CH3 C D
H3C
A B
cholesterol
HO steroid backbone
Transport of lipids
Triglycerides and cholesterol are essentially insoluble in the aqueous
blood plasma and therefore cannot be transported as free molecules.
Therefore, these lipids assemble with phospholipids and proteins to
form particles known as lipoproteins. The inside of the lipoprotein is
hydrophobic, but the outside is hydrophilic and therefore can travel in the
bloodstream. There are different types of lipoprotein, classified according
to their relative densities. Each type has a different composition of protein,
triglycerides and cholesterol. Low-density lipoproteins (LDL) consist
mainly of cholesterol and are the major reservoir of cholesterol they
transport it throughout the body, where it can be stored in the tissues
or used (for example, in cell membranes). High levels of this LDL-
cholesterol can lead to fatty deposits in the walls of arteries in the heart
and elsewhere, leading to atherosclerosis (hardening of the arteries), which
can result in heart attack and stroke.
Another lipoprotein is high-density lipoprotein (HDL) this is a
protein-rich particle. It is smaller than LDL and denser, as it contains more
protein (protein is more dense than lipid). HDL consists of approximately
33% protein, compared with 25% protein for LDL. HDL scavenges
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 21
cholesterol from LDL, tissues and artery walls and returns it to the liver,
Low LDL-cholesterol levels and
where it is converted to bile acids. Thus, HDL removes cholesterol from the
high HDL-cholesterol levels
tissues and arteries and has a beneficial effect with regards to heart disease.
reduce the risk of heart disease.
LDL-cholesterol levels are not based on the amount of cholesterol
taken in the diet but rather on the amount and type of fat taken in.
Saturated fats (especially myristic, palmitic and lauric acids) and trans fats
increase the level of LDL-cholesterol in the body and are thus associated
with an increased risk of heart disease. Trans fats have also been found to
lower HDL-cholesterol levels.
Polyunsaturated and monounsaturated fats, however, have been shown
by some studies to lower LDL-cholesterol and increase HDL-cholesterol.
Therefore, the majority of fat taken in the diet should be in the form of
mono- and polyunsaturated fats, while intake of saturated fats and trans
fats should be limited (or totally excluded) in order to reduce LDL-
cholesterol levels.
Table B2 summarises the roles of the various lipids and gives some of
their positive or negative effects.
Test yourself
10 Is the following fatty acid saturated or unsaturated? Would you expect a fat consisting mainly of this type of
fatty acid to be liquid or solid at room temperature?
O
C
HO
12 The formulas of some fatty acids are shown below. Deduce the number of C=C in each and hence work
out the iodine number (Mr for I2 = 253.8).
C13H27COOH C15H23COOH C17H33COOH C19H35COOH
13 A fatty acid with Mr = 254.46 has an iodine number of 100. Work out the number of C=C in the fatty acid.
22 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
B5 Micronutrients and macronutrients Learning objectives
Nutrients are chemical substances derived from food that are used by
the body for growth and survival. We have so far discussed proteins,
Explain the difference between
micro- and macronutrients and
carbohydrates and fats. All these are required in relatively large amounts give examples.
in the diet they are known as macronutrients, and other examples
include minerals such as sodium, magnesium, potassium, calcium,
Compare the structures of
vitamins A, C and D and relate
phosphorus, sulfur and chlorine. their structures to their relative
solubilities in water or fat
Macronutrients are chemical substances that are required in
Deduce whether a vitamin is
relatively large amounts (>0.005% body weight) by the body. water- or fat-soluble by looking
at its structure
Micronutrients, by contrast, are required in very small amounts by Discuss the different types of
the body (<0.005% body weight). Examples include vitamins and trace nutrient deficiencies around the
minerals such as iron, copper, zinc, iodine, selenium, cobalt and manganese. world, and the diseases they lead
Their main functions are as co-factors for enzymes (a co-factor is a to, and suggest ways of solving
non-protein component of an enzyme that is essential for its correct the deficiency problems
functioning), but they may also be incorporated into certain hormones.
They are required in mg or g amounts, and some, if taken in high
amounts, can be toxic, e.g. the trace minerals.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 23
Vitamin A (retinol)
Vitamin A (Figure B24a) is a fat-soluble vitamin. It contains a long
hydrocarbon chain and a hydrocarbon ring, and although it does contain a
hydroxyl group, the polar nature of this group is not enough to offset the
non-polar nature of the rest of the molecule. Having mostly a non-polar
structure means that it is soluble in fat rather than water.
Vitamin A is important for vision, especially in low-light intensities; it
also plays a role in growth and development, skin repair and the immune
system.Vitamin A (in the form of retinol) is found in animal products, such
as liver, egg yolks and dairy products. It can also be formed in the body from
beta-carotene, a vitamin A precursor, found widely in fruit and vegetables
such as carrots. Deficiency of vitamin A results in a condition known as
xerophthalmia, a severe drying of the eye, accompanied by night blindness; it
is a leading cause of blindness in children in developing countries.
Vitamin D (cholecalciferol)
Examiners tip
Vitamin D is a steroid derivative; it is not a steroid, because it does
You should be able to work
not have the characteristic steroid backbone (Figure B24b). It contains
out from its structure whether
one polar hydroxyl group and a large non-polar hydrocarbon backbone,
a particular vitamin is water-
making it predominantly hydrophobic and therefore fat-soluble.Vitamin
or fat-soluble.Vitamins
D plays an important role in promoting the absorption of calcium
containing many OH
and phosphorus from food and in promoting mineralisation of bone;
groups and/or several very
it is present in butter, cheese, milk and fish liver oil.Vitamin D can be
electronegative atoms (such as
synthesised in the body by the action of sunlight on pro-vitamins in the
N or O) are generally water-
skin, but deficiency can occur, for example in those with limited exposure
soluble, and those that consist
to sunlight, and also in children, who require larger levels of vitamin D for
almost entirely of C and H are
growth.Vitamin D deficiency in children can lead to a condition called
fat-soluble.
rickets, characterised by softening and deformity of the bones.
a b H3C
CH3 CH3 CH2
H3C CH3 CH CH2
H H CH3 H2C
C C CH2OH CH3
C HC
CH C C C
H H H CH2
CH3
CH3 vitamin A (retinol)
HO vitamin D (cholecalciferol)
Figure B24 Structures of the fat-soluble vitamins: (a) vitamin A; and (b) vitamin D.
Malnutrition
Malnutrition is the term used to describe an inadequate intake of
the nutrients needed to maintain good health. It can be caused by not
eating enough food and also from eating a poorly balanced diet: for
example, a diet of processed, fast foods, which lack necessary vitamins and
minerals. The problem of insufficient food intake is not just a problem
in the poorer developing countries: certain groups of the population in
industrialised countries are also at risk, for example, the elderly. Poorly
balanced diets are a growing problem in countries such as the USA and
the UK, where obesity levels are rising and diets rich in over-processed,
high-fat, low-nutrient foods, are increasingly common.
24 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
Micronutrient deciencies
Iron is a component of haemoglobin and is required for O2 transport.
A lack of iron in the diet leads to a reduced amount of haemoglobin
and red blood cells in the body, known as anaemia, symptoms of
which include feeling tired, breathlessness and palpitations. Iron
deficiency is thought to be the commonest micronutrient deficiency
in the world and occurs not just in developing countries but also
industrialised countries. Iron-supplementation of foods, such as
breakfast cereals, is one strategy to overcome this problem and has
proved to be successful in a number of countries.
Iodine in the diet is used to synthesise the thyroid hormone thyroxine,
which plays a major role in controlling the basal metabolic rate in adults
and growth and development in children. Deficiency of iodine results
in a condition called goitre (or goiter), characterised by a lump around
the throat area caused by an enlarged thyroid gland. Addition of iodine
to table salt has resulted in a substantial decrease in iodine deficiency.
Vitamin A deficiency can result in a condition called xerophthalmia,
which, as we have already mentioned, is a leading cause of blindness in
many developing countries. Fortification of foods with vitamin A has
proved a successful strategy at combating this deficiency. Fortification
of margarine has produced great success in many countries, but other
foods are also showing promise for example, sugar fortification (used
in Central America) and maize fortification (in Zimbabwe).
Vitamin B group: vitamin B3 (called niacin) is converted to a
coenzyme that plays a key role in oxidationreduction processes in the
cell. Deficiency results in a condition called pellagra, characterised by
diarrhoea, dermatitis and dementia.Vitamin B1 (thiamine) is converted
to a coenzyme that is necessary for energy production within the cell.
Deficiency leads to beriberi, characterised by muscle weakness. Many
foods, such as breakfast cereals, are fortified with niacin and thiamine,
and deficiency is rare in developed countries.
Vitamin C deficiency results in scurvy. Scurvy used to be a common
problem among sailors, who spent long periods at sea without fresh
fruit and vegetables, before it was recognised that a regular intake
of citrus and other fruits and vegetables would prevent this disease.
Nowadays, scurvy is rare in developed countries.
Vitamin D deficiency can result in rickets in children. As explained
above, it is a condition in which softening and deformity of the
bones occur due to a reduction in uptake of calcium and phosphate
from food. Fortification of dairy products with vitamin D means that
deficiency is now rare in industrialised countries. However, it is still a
problem in some developing countries, where intake of dairy products
may be low, or where religious or social customs and/or climatic
conditions prevent an adequate exposure to sunlight.
Selenium is important for the functioning of certain enzymes, which
mop up peroxides in the cell. Selenium is found in the soil and is taken
up by plants such as cereal crops; the milling process of the grain does
not remove the selenium, and thus it is usually taken in the diet in
sufficient quantity to prevent deficiency. However, in certain areas of
some countries, such as Russia and China, selenium levels in the soil are
too low, and in these cases selenium supplements are required.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 25
Macronutrient deciencies
Protein
Protein deficiency is one of the most common forms of malnutrition in
developing countries and is associated with millions of deaths per year; it
is most common in young children at the time of weaning. There are two
types: marasmus and kwashiorkor. Marasmus is malnutrition caused by
an inadequate intake of both protein and energy, and is characterised by a
thin, emaciated appearance and stunted physical and mental development
if the condition persists. Kwashiorkor is malnutrition caused by an
inadequate intake of protein but an adequate energy intake; children
with this condition usually have a large belly, with stunted growth. These
conditions have a high death rate because they also result in a weakening
of the immune system, so that it is more difficult to fight infections; a
large number of children with protein deficiency in developing countries
die from infections rather than from the starvation itself.
Causes of deciencies
The types of nutritional deficiencies we have seen above are caused by:
food shortages in developing countries, due to lack of modern
agricultural methods, such as fertilisers and irrigation
poor food distribution and high food prices
chronic (long-term) illness, such as chronic infections, resulting in
decreased appetite, reduced ability to absorb nutrients, and excessive
excretion of nutrients due to chronic diarrhoea
poor diet due to lack of education or understanding of what constitutes
a balanced diet.
Some solutions
provision of energy- and nutrient-rich food rations
fortification of staple foods with micronutrients
genetic modification of food: for example, growing rice containing
beta-carotene to prevent vitamin A deficiency-related blindness in
children in developing countries
provision of nutritional supplements
help with implementation of modern agricultural methods in
developing countries
improving education with regards to how to eat a balanced diet.
Test yourself
14 Would you expect the following vitamin to be fat- or water-soluble?
O
26 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
B6 Hormones Learning objectives
Hormones are chemicals messengers they allow cells in the body to
communicate. They cause a specific effect on hormone-sensitive cells
Describe how and where
hormones are produced and
(called target cells) in the body and the effect they cause depends on the explain their roles in the body
type of hormone and also the type of target cell. Hormones are produced
in glands known as endocrine glands (the study of the hormone system
Describe the structural
differences and similarities
is called endocrinology). The endocrine glands secrete the hormones of cholesterol and the sex
directly into the blood, where they then affect cells from other organs, or hormones
from the organ from which they were released.
When the hormone reaches the target cell, it binds to a specific protein,
Outline how combined oral
contraceptives work to prevent
known as a receptor, either on the surface of the cell or inside the cell. It pregnancy
is the binding of the hormone to the receptor that triggers the target cell
to produce a response.
Describe the medical and non-
medical uses of steroids
There are many different types of hormone in the body; some are
proteins (e.g. insulin, antidiuretic hormone (ADH)), some are steroids (e.g.
oestrogen, testosterone, progesterone, aldosterone) and some are amino
acid derivatives (e.g. thyroxine, epinephrine).
ADH
ADH is a short peptide produced in the pituitary gland in response to an
increase in osmotic pressure in the blood and also a reduction in plasma
volume (signs of dehydration). The main target cells of ADH are the
kidney tubules, which are made more permeable; there is an increase in
the uptake of water, resulting in more water being retained in the body
and less lost in the urine.
Steroid hormones
The steroid hormones include the corticosteroids and the sex steroids.
Aldosterone
Aldosterone is produced in the adrenal glands, in the adrenal cortex. It is
known as a corticosteroid and regulates the salt and water balance in the
body. It acts on the kidney tubules to increase the uptake of sodium and
water and to promote the loss of potassium.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 27
Oestrogen and progesterone
Oestradiol is the most potent oestrogen (others are oestrone and oestriol).
It is produced in the ovaries in pre-menopausal women and has effects on
many types of cell in the body, for example, breast cells and endometrial
cells (lining the uterus). It is responsible for promoting female secondary
sexual characteristics, such as breast development, and also for regulating
the menstrual cycle (along with progesterone) and maintaining pregnancy.
Progesterone is also produced in the ovaries and prepares the body for
conception by preparing the endometrium for implantation of an egg.
If pregnancy occurs, it helps maintain pregnancy (during pregnancy, it is
produced in the placenta) and prepares the body for birth.
Testosterone
Testosterone is a male sex hormone (known as an androgen) produced in
the testes and has effects on many cells in the body. It is responsible for
promoting the male secondary sexual characteristics, such as deepening of
the voice, increase in muscle mass and strength, facial hair, etc.
Epinephrine (adrenaline)
Epinephrine is secreted by the adrenal glands (in the medulla) and is a
major hormone of the part of the nervous system that prepares the body
for stressful situations. It acts on many cells of the body, for example, the
brain, muscles, blood vessels, heart, lungs and digestive system. It has many
effects, including: increasing blood pressure, and the strength and rate of
heart contractions, to pump more blood to the muscles; increasing the
breakdown of glycogen in the liver, to raise blood glucose levels so that
they can be utilised by cells; and dilating the vessels in the lungs so that
more oxygen can be supplied to the heart and muscles. All these effects
allow the body to deal with emergency situations, called the fight or
flight response.
28 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
H3C H3C
CH2
CH CH2 C O
CH3 CH3
C CH3
17
H2 CH ketone
CH3 CH3
H3C
3 cholesterol progesterone
HO O
hydroxyl alkene ketone alkene
OH OH
CH3 CH3
hydroxyl
hydroxyl
benzene
CH3 ring
oestradiol
testosterone
O HO
ketone alkene hydroxyl
Figure B25 Structures of cholesterol, progesterone, testosterone and oestradiol.
Oral contraceptives
There are different types of oral contraceptives probably the most
commonly used is called the combined oral contraceptive pill, which
contains a combination of oestrogen and progesterone. It works in
a number of ways: it prevents the release of an egg from the ovary,
i.e. it prevents ovulation from occurring; it makes the lining of the
endometrium thinner so that it is unsuitable for implantation of a
fertilised egg; and it makes the mucus in the cervix thicker to prevent
sperm from reaching the egg. If taken correctly, the combined oral
contraceptive pill can be more than 99% effective at preventing pregnancy.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 29
breast cancer are dependent on oestrogen for their growth. Once HRT is
stopped however, a womans risk of breast cancer starts to return to that of
the general population within three years of stopping treatment.
Other clinical uses of steroids include for the treatment of inflammation
and associated conditions. Hydrocortisone (also known as cortisol) is a
naturally occurring corticosteroid, so called because it is produced in
the adrenal cortex in the adrenal glands (there are two adrenal glands in
the body, one situated above each kidney). One of its effects is to reduce
inflammation, and therefore it, and synthetic corticosteroids, are used in
the clinic for a variety of conditions, such as eczema, rheumatoid arthritis
and asthma.
It was mentioned earlier that testosterone is an androgen (a male sex
hormone). It has uses medically as an androgen replacement in men who
have testosterone deficiency, for example, because of a disorder of the testes.
Androgens are also used non-medically, however for example, in sport.
Androgen abuse is the use of androgens for non-medical purposes
(they are called anabolic steroids because they promote tissue growth,
in particular of muscle). The three most common anabolic steroids that
are abused are testosterone and the synthetic derivatives nandrolone
and stanozolol. They are taken by sportsmen and women to enhance
performance, because they increase muscle mass and are also believed to
improve endurance. They have been used in disciplines such as athletics,
weightlifting and cycling. The ethical implications for taking anabolic
steroids is clear, in that it gives that person an unfair advantage over
their competitors and is thus cheating. It is a major concern to sporting
bodies worldwide, and random drug screening in major sporting events
is routinely employed to detect abuse. In the wider community, anabolic
steroids are also used for bodybuilding and by a minority of people in
certain occupations, such as security guards and bouncers, for cosmetic
reasons to give themselves a more masculine and intimidating look.
Abusing anabolic steroids can have a major impact on the body their
use can cause a number of side effects, such as breast growth in men,
acne, infertility, mood swings and aggressiveness. They can also cause high
blood pressure, liver disease (including cancer), heart attack or stroke.
Psychologically, abusers of anabolic steroids can become addicted to them,
developing an increased desire to keep taking them, even if unwanted side
effects occur.
Test yourself
15 Label the rings A, B, C H3C
and D and state how many O
CH3 C
ketone groups are present
in this steroid. CH3
30 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
B7 Enzymes HL
Learning objectives
Enzymes are proteins evolved by living organisms for the specific function
of catalysing biochemical reactions. They are found throughout the
Describe the structure and
function of enzymes as
cell and catalyse virtually every conversion that occurs in the cell. Some biological catalysts, including
enzymes are also found outside the cell for example, in the blood plasma. the mechanism of enzyme
There are many types of enzyme, and each type has a name based on the action, and proposed models for
type of reaction it catalyses and/or on the type of molecule on which substrate binding
it acts. For example, transferase enzymes catalyse transfer of a functional
group, oxidoreductase enzymes catalyse oxidationreduction reactions,
Describe how enzyme
activity changes with substrate
proteases break down proteins and lipases break down lipids. Note that the concentration
enzyme name ends in -ase; this is true for most enzymes.
Determine Vmax and the
Michaelis constant (Km) by
Enzymes are proteins, and their activity is dependent on their graphical means and explain the
shape, i.e. their tertiary structure. A number of enzymes also importance of Km
have a quaternary structure, where they consist of two or more
sub-units. Thus, quaternary structure is also important for the
Explain how heavy metal ions,
temperature changes and pH
functioning of those enzymes. changes can affect enzyme
activity
Enzymes act as biological catalysts they speed up biochemical reactions
Compare the modes of action
in the body without themselves undergoing any permanent chemical of competitive and non-
change. Most reactions catalysed by enzymes would not proceed to any competitive inhibitors, including
significant extent without the presence of enzymes enzyme-catalysed how they affect Vmax and Km
reactions are typically 108 to 1012 times faster than the corresponding
Describe the similarities and
uncatalysed reactions. They speed up reactions by lowering the differences between enzymes
activation energy of the reaction; they do not make an unfavourable and inorganic catalysts
reaction favourable (see Chapter 6, page 250 of the Coursebook). They
do this by providing an alternative pathway for the reaction, which has a
lower activation energy. They also provide an area (the active site) for the
reactants to come together and thus make it more likely that the reactants
will react.
The reactants involved in enzyme-catalysed reactions are called
substrates, and enzymes are highly specific for the particular substrate
on which they act. Some enzymes act on only one substrate, whereas
others act on a group of related substrates.
The enzyme must bind temporarily to the substrate for the reaction to
take place. This binding takes place in a mostly hydrophobic pocket called
the active site. The active site is normally situated near the surface of the
enzyme, towards one end of the protein. The active site is where catalysis
takes place, and its shape is key to the specificity of the enzyme.
The type and position of amino acids in the active site make it specific for
substrates of a certain size and shape.
When a substrate (S) binds to the enzyme (E) active site, it forms a
reaction intermediate known as an enzymesubstrate complex (ES).
This is when the substrate enters the active site and forms interactions
with R groups of amino acids in the active site. The type of binding
is reversible, i.e. weak bonding such as hydrogen bonds, electrostatic
interactions and van der Waals forces.
Formation of the enzymesubstrate complex can cause the substrate
molecule to become strained (distorted), and this will then more readily
form the product (P), with regeneration of the enzyme. The product then
diffuses away from the enzyme active site, as it does not bind as effectively
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 31
HL to the active site as the substrate. A general equation for the reaction is
given below:
E+S ES E + P
Enzyme specificity was first compared to a key (the substrate) fitting into
a lock (the active site of the enzyme). This was called the lock-and-key
hypothesis and it proposed that the active site was a complementary
shape to the substrate, like a specific key is a complementary shape to its
lock (Figure B26). However, a more recent hypothesis proposes that for
some enzymes, when the substrate enters the active site, it can cause a
change in the shape of the active site to better accommodate the substrate,
i.e. the active site changes to a shape complementary to the substrate
only after the substrate has entered the active site. This is known as the
induced-fit hypothesis (Figure B27).
enzyme
active site enzymesubstrate
complex
substrate
Figure B26 The lock-and-key hypothesis.
enzyme
substrate
complex
enzyme enzyme active
active site site changes shape
slightly to accomodate
substrate substrate
Enzyme kinetics
A lot of work was carried out at the beginning of the 20th century to
study the effects of substrate concentration on enzyme activity. At low
substrate concentrations, the rate of the enzyme-catalysed reaction is
proportional to the substrate concentration. As the substrate concentration
increases, however, the rate of reaction increases, but to a lesser extent,
and is no longer proportional to substrate concentration. Then at high
substrate concentrations, the rate of reaction remains constant and does
not increase further with an increase in substrate concentration.
This can be explained as follows: when the substrate is in low
concentration, there is a sufficient number of enzyme active sites
available to bind substrate and form the ES complex, so as the substrate
32 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
concentration increases, more ES forms and the rate increases proportional HL
to the increase in substrate concentration. The rate is essentially first order
with respect to the substrate.
As the substrate concentration increases further, however, some of the
active sites are already occupied with substrate and so there are not enough
active sites to bind all of the substrate.This means that the rate of reaction
increases less than would be expected when the substrate concentration
increases.This results in a slowing down in the increase of the rate of reaction
and the rate is now no longer proportional to the substrate concentration.
When the substrate concentration is high, all of the active sites of the
enzyme molecules are occupied by substrate, and so the rate of reaction
remains constant (maximum rate), i.e. any further increase in substrate
concentration results in no increase in rate of reaction, as the enzyme is
saturated with substrate. The enzyme is working at maximum capacity
as soon as an active site becomes vacant, it is occupied almost immediately
by a substrate molecule. The rate is zero order with respect to the substrate
when the substrate concentration is sufficiently high.
The curve produced is known as a MichaelisMenten curve (Figure
B28), named after Leonor Michaelis and Maud Menten, who were
pioneers in enzyme kinetics. Note from the curve that the rate for an
enzyme saturated with substrate is known as the maximum velocity
(Vmax). Vmax varies from one enzyme to another and is dependent on
reaction conditions such as temperature and pH.
Note also the Michaelis constant (Km). This is the concentration
of substrate when the rate is equal to one half Vmax. Km is a
useful constant, as it gives an indication of the affinity of an enzyme
for a substrate, i.e. how well the enzyme binds the substrate (it is thus
a measure of the stability of the ES complex). If an enzyme has a low
Km, this indicates that it has a high affinity for a substrate, as only a small
concentration of substrate is needed for the reaction to proceed at half
its maximum velocity. Large Km values indicate that the enzyme has less
affinity for the substrate, as a large concentration of substrate is needed to
reach half Vmax.
Vmax
maximum velocity
for the reaction
Rate of reaction
1
2 Vmax
0
0 Km
Concentration of substrate
Figure B28 The MichaelisMenten curve.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 33
HL Factors that inuence enzyme activity
Enzymes have evolved to work optimally under the conditions to which
they are exposed in the body. If these conditions are changed significantly,
this can have a dramatic effect on the functioning of the enzyme. Three
factors that can influence enzyme activity are temperature, pH and the
presence of heavy metal ions.
Temperature
Temperature has an effect on enzymatic reactions (Figure B29): as the
temperature increases, the kinetic energy of the system increases and there
is more chance that substrates with energy greater than the activation
energy will collide with the enzyme active site. Also, as the temperature
increases, more collisions occur in a certain time between the enzyme and
substrates. Therefore, increasing the temperature increases enzyme activity.
optimum
Rate of reaction
temperature
denaturation
occurs, leading
to loss of enzyme
activity
0
0 20 40 60
Temperature / C
Figure B29 The effect of temperature on enzyme activity.
pH
Enzymes work within a relatively narrow pH range, depending on the pH
of their environment in the body. The optimum pH varies widely from
one enzyme to another: for example, digestive enzymes such as pepsin,
which act in the stomach, have an optimum pH of approximately 1.5
to 2.5, which is the pH that they would be exposed to in the stomach;
however, digestive enzymes that act in the intestines, such as pancreatic
lipase, have an optimum pH of approximately 8.
34 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
If the enzyme is exposed to a pH above or below its optimum pH, HL
activity starts to decline. This is for two reasons: firstly, some enzymes The optimum temperature
contain ionisable amino acids at the active site that participate in the for enzymes in the human
catalytic action of the enzyme; changes in the pH affect the ionisation body is around 37 C, i.e.
of those amino acids and thus influence their ability to participate in the body temperature. Above that
reaction. temperature, the enzyme starts to
A second reason for the decline seen in enzyme activity is denaturation: denature as bonds responsible for
significant changes in pH change the charges on the R groups of the holding the protein in its three-
amino acids that form the intramolecular interactions that dictate the dimensional shape break.
shape of the active site. The resultant change in shape results in a loss of
function of that enzyme, as described above for temperature.
Enzyme inhibitors
If a chemical binds to an enzyme and prevents it from carrying out its
catalytic activity, the enzyme is said to be inhibited, and the chemical
is called an enzyme inhibitor. There are two main types of enzyme
inhibitors, depending on where they interact with the enzyme:
competitive inhibitors and non-competitive inhibitors. Enzyme inhibitors
are widely used as medicinal drugs, the most common being the
competitive inhibitors.
enzyme
competitive inhibitor
active site
binds to active site and
stops substrate bonding
competitive substrate
inhibitor
Figure B30 The mechanism of a competitive inhibitor.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 35
HL Competitive inhibitors are usually reversible, so the enzymeinhibitor
complex breaks down to release the inhibitor, which then leaves the active
site. Because the inhibitor and substrate are competing for the active site,
increasing the substrate concentration will make it more likely that the
substrate will enter the active site, and thus inhibition will be reduced. The
maximum velocity (Vmax) of the reaction will remain the same, but it will
take a higher concentration of substrate to reach Vmax, so the Km will be
higher (Figure B31).
Vmax
no inhibitor
present
Rate of reaction
competitive
inhibitor present
1
2 Vmax
0
0 Km Km
Substrate concentration
Non-competitive inhibitors
Non-competitive inhibitors do not compete with the natural substrate, as
they do not bind to the active site, but another region of the enzyme. This
binding causes a conformational change in the shape of the active site,
which prevents the substrate from binding (Figure B32). As the inhibitor
does not compete with the substrate for the same site, increasing the
substrate concentration does not reduce inhibition. This means that the
Vmax is reduced in the presence of this type of inhibitor, but the Km is the
same (Figure B33).
non-
competitive binding of
inhibitor inhibitor
active
site
36 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
HL
Vmax
no inhibitor
present
Vmax
Rate of reaction
non-competitive
inhibitor present
1
2 Vmax
1
2 Vmax
0
0 Km
Substrate concentration
Figure B33 The effect of a non-competitive inhibitor on Vmax and Km.
Test yourself
16 Enzyme X has a Km of 2.0 107 mol dm3 for a particular
substrate, whereas enzyme Y has a Km of 2.0 106 mol dm3
for the same substrate. Which enzyme binds better to the
substrate?
17 What types of interactions are possible between a competitive
reversible inhibitor and the enzyme active site?
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 37
Learning objectives
HL B8 Nucleic acids
As their names suggest, deoxyribonucleic acid (DNA) and ribonucleic
Describe the structures of
acid (RNA) are nucleic acids. DNA carries the genetic code of the
nucleotides and polynucleotides
(nucleic acids) organism. When cells divide (make copies of themselves), the DNA of the
cell must be copied (called DNA replication) so that the new cells will
Describe the differences in
have the same set of genetic information within them. When organisms
structure between DNA and
RNA reproduce, they copy their DNA and pass it on to the next generation. All
organisms house their genetic information within DNA, except for some
Explain the double helical
viruses, which use RNA.
structure of DNA
Describe how DNA carries the
Structure of nucleic acids
genetic code, and explain how
DNA directs protein synthesis Nucleic acids are polymers made up of monomers known as nucleotides.
Describe the steps involved in Nucleic acids are thus also called polynucleotides.
DNA profiling and explain its Nucleotides consist of a five-carbon (pentose) sugar, an organic
role in criminal investigations nitrogen-containing heterocycle (N is part of the ring) called a base and a
and in paternity cases phosphate group (Figure B34).
The pentose sugar is different in DNA and RNA. In RNA, the sugar is
ribose, and in DNA, the sugar is 2-deoxyribose, as it lacks an oxygen at
O the C2 position (Figure B35).
phosphate
O P O
base
HO HO
O 5' OH 5' OH
5' CH2 CH2
CH2 O O
O 1' 1'
4' 1' H H H H
H H
3' 2' H H H H
H H 2' 2'
OH OH OH H
OH H ribose 2-deoxyribose
pentose
sugar
Figure B35 Structures of ribose and deoxyribose.
Figure B34 The general structure of a
nucleotide.
38 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
HL
N
N N
Examiners tip
You are not required to learn
N N N
the structures of the nucleotide
H bases, but you should be able
purine pyrimidine
to recognise them.
NH2 O
N N
N NH purine
bases
N N N N NH2
H H
adenine (A) guanine (G)
NH2 O O
H3C
pyrimidine
N NH NH
bases
N O N O N O
H H H
cytosine (C) thymine (T) uracil (U)
Figure B36 The structures of purines and pyrimidines found in DNA and RNA.
N
NH
N NH2
N
O (G)
CH2
O
NH2
H H
H H
O H N
O P O
N O
O (C)
CH2
O NH2
H H
H 3' H N
O H N
phosphodiester O P O
link N N
(A)
O 5'
CH2
O
H H 1'
H 3' H
O H
O P O
O
Figure B37 Nucleotides joined by a phosphodiester link in a strand of DNA.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 39
HL Differences between RNA and DNA
The differences between DNA and RNA are summarised as follows:
DNA is a double-stranded nucleic acid, whereas RNA is single
stranded
DNA contains thymine, whereas RNA contains uracil as a base
DNA contains deoxyribose (no OH on C2') as the sugar, whereas
RNA contains ribose.
Structure of DNA
Watson and Crick famously proposed the double-stranded structure of
DNA in 1953. DNA is a double helix, consisting of two polynucleotide
strands that spiral around an axis. Each complete turn of the helix is ten
nucleotides in length. The sugar-phosphate backbone in each strand
winds around the outside of the helix, with the nucleotide bases attached
to the sugars stacked in the interior of the helix. The hydrophilic sugar-
phosphate backbone is thus exposed to the aqueous environment of
the cell, while the relatively hydrophobic bases are shielded from this
environment in the interior of the helix.
Each of the bases on one strand forms hydrogen bonds with a
base on the opposite strand. The bases pair together in a specific way:
the adenine bases on one strand form hydrogen bonds only with the
thymine bases on the opposite strand (two hydrogen bonds) and the
guanine bases on one strand hydrogen bond only with cytosine bases
on the other strand (three hydrogen bonds). This specific interacting of
bases is known as base pairing, and the two bases involved are called base
pairs (Figure B38). Each base pair consists of one purine base and one
pyrimidine base.
The structure of DNA has been likened to a ladder, which has been
twisted into a helix. The base pairs are the rungs of the ladder, whereas the
sugar-phosphate backbones are the sides of the ladder (Figure B39).
When a cell divides, it needs to copy its DNA so that the new cell
will have an identical set of chromosomes to the parent cell. The process
of copying DNA is called DNA replication and involves unwinding
and separating the two strands of DNA, accompanied by breaking the
hydrogen bonds between the base pairs. This exposes the nucleotide bases
of the DNA (which were in the interior of the helix) and allows the bases
40 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
O
O P O
H O
base pairs H H
H
H H
N
H O H2C
O O
N N
N H O P O
N (C)
O H O
O N H H H
N N
CH2 (G)
O H N H H
H H O
O H2C
H H N
H H N O
O H (G)
N
O P O H N
N
O P O
O N H3C
H H O
N O H H H
CH2 (C) O
O H H
H H
H H O H2C
N
N N O
H 3' H
O H H (T)
N DNA
N
O P O strand
O
O N HL
N
(A)
hydrogen
CH2 bonds
O
H H
H H
O H
O P O
DNA
strand
Figure B38 Complementary base pairing in DNA.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 41
parent parent
HL strand strand
C G
A T
A T C
C T A
G
C G
A T
A T C
G C
A
G C
G T
C DNA strands
separate
T A T A
C G
C G
C T A
G A
A T free nucleotides
A T base-pair with
T A T bases on the parent
C G C DNA strand and
G C are joined to the
A G G growing DNA daughter
strand
T A T A T
G G C G C A pairs with T
Figure B39 The double-helix structure C C G pairs with C
of DNA.
T A T A
C G C G
Remember that proteins are
made up of a specific sequence hydrogen
of amino acids (called the bonds newly synthesised
daughter strands
primary structure). This sequence
Figure B40 DNA replication.
gives the protein its shape and
therefore its function, and it is protein. It is these proteins produced by the cell that carry out the
the sequence of nucleotide thousands of biochemical processes that are responsible for life.
bases within each gene that For a cell to produce a protein, the gene must first undergo a process
dictates the primary structure called transcription. This occurs in the nucleus, and the first step in this
of the protein produced. In process is the unwinding and separation of the two strands of DNA on
other words, the information which the gene is situated. In a similar manner to DNA replication, this
for the structure of each protein exposes the nucleotide bases of the gene and allows the bases on one of
is carried in the sequence of the DNA strands to be used as a template.
nucleotide bases within the Transcription differs to DNA replication, however, in that only one
particular gene. strand of DNA is used as a template and the complementary strand
produced is a ribonucleic acid called messenger RNA (mRNA). The
complementary strand of mRNA is built up through complementary
RNA nucleotides (called ribonucleotides) forming base pairs with
the exposed bases of the DNA template. Guanine pairs with cytosine
and adenine pairs with uracil (not thymine, as in DNA). As each
Translation is the process of
ribonucleotide comes in and forms a base pair, it is joined covalently to
protein synthesis in which the
the growing mRNA chain by a phosphodiester link. This results in the
code held in the sequence of
production of a strand of mRNA that has the complementary sequence
bases of the mRNA is translated
of bases to the gene of the DNA template strand. This mRNA then leaves
into the sequence of amino acids
the nucleus and enters the cytoplasm, where it takes part in the second
(primary structure) of the protein.
process to produce a protein, known as translation.
42 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
During translation, the mRNA first attaches to a ribosome (a small HL
organelle in the cytoplasm) and the code is read by a type of RNA called
transfer RNA (tRNA). tRNAs are small RNA molecules with an amino
acid covalently attached to one region of the molecule. Another region
of the same tRNA molecule interacts with complementary bases on the
a
mRNA. The tRNA interacts with a sequence of three nucleotide bases amino
on the mRNA; these three bases are called a triplet code, or codon, and acid
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 43
HL The isolated DNA is cut into small pieces using restriction enzymes
that recognise specific base sequences in the STR regions of the DNA.
These enzymes act like a pair of scissors, chopping up the DNA at those
particular sequences. Multiple copies of these STR regions are then
produced using a technique known as polymerase chain reaction
(PCR). PCR uses a DNA primer (to initiate DNA replication) and a
DNA polymerase enzyme (to polymerise nucleotides to produce new
complementary strands of DNA). In this way, thousands or millions of
copies of the DNA fragments may be produced.
These DNA fragments are then separated according to size using gel
electrophoresis. DNA bears a negative charge (owing to the phosphate
groups), and DNA fragments thus move towards the positive electrode
when an electric field is applied. Smaller fragments move faster than larger
fragments, and thus move further down the gel sheet.
The resulting pattern of bands is then transferred to a nylon membrane,
and a radioactive label such as 32P is then added, which combines with
particular bands of the DNA. X-ray film is then exposed to the radiation
produced by the 32P and developed the DNA fragments appear as dark
bands on the film (Figure B42). The pattern of the bands is unique to a
particular individual, and so this pattern is compared to the DNA patterns
Figure B42 A DNA prole. of the suspect(s) to see if there is a match.
DNA profiling can also be used in paternity cases, where the DNA
patterns are compared to see if there are significant matches between
child and proposed father. Half of the childs genetic material is from
the father, so half of the DNA fragment bands of the child should
match those of the father (the other half should match those of the
mother).
Test yourself
18 Name the only nucleotide base that does not contain an amide
functional group.
19 Which nucleotide base complementary base pairs with guanine
and how many hydrogen bonds form between the two bases?
44 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
molecules, such as glucose, to produce carbon dioxide, water and energy HL
(in the form of ATP).
General equation:
Glycolysis
Glycolysis involves the breakdown of the six-carbon sugar glucose to
two three-carbon molecules called pyruvate. This process occurs in the
cytosol (intracellular fluid) of the cell and does not require oxygen. There
are ten enzyme-catalysed steps involved in the production of pyruvate, but
the overall reaction can be simplified:
H3C O
C
C6H12O6 2
C
O O
glucose pyruvate
H O H H O
pyruvate lactate H O O H O
H C C C + H+ H C C H + CO2
In microorganisms such as yeast, anaerobic conditions resultHin pyruvate
O H
being reduced to ethanol (average oxidation number of C is 2 in
pyruvate ethanal
ethanol) and carbon dioxide. This occurs in two stages:
H
H O O H O H O H O
H O H H H
H
pyruvate ethanal ethanal ethanol
H
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 45
H O H O
HL This is the basis of fermentation and the overall reaction starting from
glucose is:
This process does not yield any ATP; however, it does serve to convert
NADH back to NAD+, which can then be fed back into glycolysis. Once
NAD+ has been regenerated, glycolysis can continue. As glycolysis results
in a net production of only two molecules of ATP, anaerobic respiration
yields only a small amount of energy compared with aerobic respiration,
which yields 36 molecules of ATP per molecule of glucose.
Under aerobic conditions, pyruvate enters the mitochondria (rod-
A brief, simplified summary of
shaped organelles, in which most of the energy is produced in the cell).
aerobic respiration.
Through a complex series of reactions and steps, pyruvate is ultimately
1 Glucose is converted to two
oxidised to carbon dioxide, while oxygen is reduced to water.
molecules of pyruvate during
glycolysis.
The electron transport chain
2 Pyruvate undergoes a series of
reactions, including entry into It is the electron transport chain that generates the largest amount of
the citric acid (Krebs) cycle ATP molecules. This is a series of proteins in the inner mitochondrial
and is oxidised to CO2. During membrane that act as electron carriers, passing electrons from reduced
the oxidation steps, NAD+ coenzymes along the chain to molecular oxygen. It consists of a series of
becomes reduced to NADH. redox reactions, involving the flow of electrons from a reducing agent to
3 The reduced coenzymes enter an oxidising agent. The electrons flow along the chain in the direction
the electron transport chain, of increasing electrode potential (reduction potential), i.e., passed
which consists of a system from a stronger reducing agent to a stronger oxidising agent, with the
(chain) of protein complexes ultimate reduction of oxygen to water (Figure B43).
found in the inner membrane strongest reducing agent strongest oxidising agent
of the mitochondria. These NADH O2
proteins accept the electrons e e e
from NADH and pass them electron transport chain
NAD+ H2O
along the chain to the
terminal electron acceptor, Figure B43 Representation of the electron transport chain.
molecular oxygen, which is
reduced to water. The NADH coenzymes are strong reducing agents and give up their
two electrons to the first protein complex in the chain. They are oxidised
back to NAD+ for reuse, and hydrogen ions (H+) are generated in this
process. The electrons are passed on to an electron carrier (which accepts
the electrons, i.e. gets reduced) and passes them on to the next protein
complex along the chain until the terminal oxidising agent (O2) is
reached. The equation for the reduction of oxygen is as follows:
O2 + 4e + 4H+ 2H2O
As the electrons are passed from one carrier to the next, hydrogen ions
are pumped into the space between the inner and outer mitochondrial
membranes. When the hydrogen ions flow back through the membrane (via
a protein channel), energy is released, which drives the synthesis of ATP.
Electron carriers
Many of the proteins in the electron transport chain are cytochromes.
Cytochromes act as electron carriers; they contain a prosthetic (non-
protein) group called a porphyrin, which is a large ring structure
46 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
consisting of four rings linked together. Most porphyrins have Fe at their HL
centre, in which case it is known as a haem group (heme in the USA).
Some cytochromes, such as cytochrome oxidase (the enzyme that reduces
oxygen to water in the electron transport chain), also contain Cu. When
cytochrome oxidase accepts electrons from the preceding electron carrier
in the chain (which acts as a reducing agent and gets oxidised), the Fe and
Cu change their oxidation states:
O2 + 4e + 4H+ 2H2O
Oxygen carriers
As well as transporting electrons, haem-containing proteins also play an
essential role in transporting oxygen: haemoglobin transports oxygen
from the lungs through the bloodstream and releases it to the cells of the
tissues, to carry out respiration.
Haemoglobin consists of four polypeptide sub-units, each of which
contains a haem prosthetic group with the iron at the centre of the
haem in the Fe2+ oxidation state (Figure B44). Each haem can carry one
CH2
H3C CH
H3C HC CH CH3
N
2+
N Fe N
H2C CH
N
HC CH
CH2 CH2
COO
H2C CH3
CH2
COO
Figure B44 The structure of haem in haemoglobin.
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 47
HL molecule of oxygen; therefore, each haemoglobin molecule can transport
four molecules of oxygen.
Oxygen binds to haemoglobin reversibly.The haem Fe can bond to six
ligands. In the unbound state, the Fe2+ is bonded to five ligands: four ligands
are the pyrrole nitrogens of the porphyrin and one ligand is an amino acid
that attaches it to the protein.When molecular oxygen binds, this becomes
the sixth ligand, and haemoglobin is said to be oxygenated (it is this
oxygenated form that gives blood its red colour, owing to the red colour
of the haem prosthetic group). In haemoglobin, the oxygen only binds
reversibly, allowing its release to tissue cells, to be used in cellular respiration.
Test yourself
20 Use oxidation numbers to deduce whether the conversion
shown below involves oxidation or reduction or both:
H O O H O
H C C C + H+ H C C H + CO2
H O H
pyruvate ethanal
Exam-style questions
1 The energy value of foods can be obtained using a food (bomb) calorimeter. A 2.6 g sample of salmon was
burnt in a food calorimeter containing 250 g water. It raised the temperature of the water from 20.4 C
to 26.0 C. The specific heat capacity of water is 4.18 J g1 K1.
a How much energy (in kJ) is contained in 250 g of salmon? [2]
b Give one reason why the result obtained was not completely accurate. [1]
2 Immunoglobulin G is an antibody that plays an important role in the immune system. It is a protein made
up of four polypeptide sub-units.
a The polypeptides in immunoglobulin G are made up from 2-amino acids.
i Give the general structural formula for 2-amino acids. [1]
ii Describe two other characteristic properties of 2-amino acids. [2]
b Explain what is meant by the primary structure of a polypeptide chain and name the type of bond
that links the amino acids together in the primary structure. [2]
c i Draw the structural formula of one of the dipeptides formed when glycine reacts with cysteine
(structures are given in the IBO Chemistry Data booklet) and name the type of reaction occurring. [2]
ii Explain why it is possible to form more than one dipeptide when glycine reacts with cysteine. [2]
d How many possible tripeptides could be produced by reacting glycine, cysteine and serine? Draw one
of these tripeptides. [2]
e The amino acids in the immunoglobulin can be analysed using paper chromatography.
i Why is the immunoglobulin first treated with dilute hydrochloric acid before paper chromatography
is carried out? [1]
ii Describe how paper chromatography is used to analyse amino acids. [4]
48 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011
3 Carbohydrates are the most abundant class of biological molecules and include simple sugars as well as
complex polysaccharides.
a Glucose is the monosaccharide that makes up starch; draw its straight-chain structure. [1]
b Glucose can form two cyclic isomers. Explain why this occurs and name both isomers. [3]
c Name the two different types of polysaccharides found in starch and name the types of linkages that join
the glucose units together in each form. [3]
d State the type of reaction that occurs when two glucose units join together to form a disaccharide and
name the other product of the reaction. [2]
e Cellulose is also a polysaccharide made up of glucose units. Explain why humans, and most other animals,
cannot digest cellulose. [2]
5 a The structures of ascorbic acid (vitamin C) and retinol (vitamin A) are shown below. Explain whether
they are fat- or water-soluble vitamins. [2]
CH2OH
HO CH
O
O
H
HO OH
ascorbic acid (vitamin C)
CH3 CH3
H3C CH3
H H
C C C CH2OH
C C C C
H H H H
b Describe the effect of a deficiency of vitamin A and suggest two possible solutions to overcome
the problem. [3]
CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011 B HUMAN BIOCHEMISTRY 49
6 Hormones are chemical messengers.
a Name the characteristic structural feature found in the sex hormones, testosterone and oestradiol
(structures are given in the IBO Chemistry Data booklet). [1]
b Identify two differences in the structures of testosterone and oestradiol, with respect to functional groups. [2]
c Describe how the combined oral contraceptive pill prevents pregnancy. [2]
d State where the hormone insulin is produced in the body and describe its main effect on the body. [2]
8 a The structures of four nucleotide bases are given below. Draw the two sets of base pairs that are found
in DNA, including the hydrogen bonds that form between them. [3]
N O H
N N H
HN
N H
HN
N N
N H N
H
O CH3
H N
H N
N
NH
NH
O
O
thymine (T) cytosine (C)
9 Cytochrome oxidase is an enzyme involved in aerobic respiration. Describe the role played by cytochrome
oxidase in aerobic respiration, including the role of the copper ions. Use suitable equations to illustrate
your answer. [5]
50 B HUMAN BIOCHEMISTRY CHEMISTRY FOR THE IB DIPLOMA CAMBRIDGE UNIVERSITY PRESS 2011