This multi-purpose table drops flush to the wall when not in use. The hinged legs fold out of sight when the table is down, and you can even mount it on a wall to use it as a serving table. 1. Cut the pieces to size according to the dimensions given. 2. Nail the top pieces (A) to the top supports (B), then add the sides (C) and ends (D). 3. Attach the legs (F) with carriage bolts. Use a washer between the leg and the table at the pivot point so the leg can swing up properly for storage. 4. Mount hinges to the table and hinge piece (E). Attach the hinge piece to the wall at the proper leg height as shown. 5. Finish the table according to in dividual preference.