Professional Documents
Culture Documents
BSC6900 GSM V900R011C00SPC700 Parameter Reference - Dien
BSC6900 GSM V900R011C00SPC700 Parameter Reference - Dien
BSC6900 GSM V900R011C00SPC700 Parameter Reference - Dien
Parameter Reference
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, ple
company headquarters.
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective holders.
Notice
The information in this document is subject to change without notice. Every effort has been made in the preparation of this doc
d service. For any assistance, please contact our local office or
espective holders.
made in the preparation of this document to ensure accuracy of the contents, but all statements, information, and recommendations in this d
and recommendations in this document do not constitute the warranty of any kind, express or implied.
Purpose
This document provides information about the BSC6900 parameters, including the meaning, value, and usage of the
Intended Audience
Network planners
Field engineers
System engineers
Shift operators
Organization
Description
Parameter ID
Parameter Name
NE
MML Command
Meaning
Feature ID
Feature Name
Value Type
GUI Value Range
Unit
Default Value
Recommended Value
Impact
Parameter Relationship
Access
Service Interrupted After Modification
Interruption Scope
Caution
Validation of Modification
Attribute
about the BSC6900 parameters, including the meaning, value, and usage of the parameters.
ollowing aspects.
Remarks
Simple string for identifying a parameter
Full name of the parameter
NEs on which the parameter is set
Commands for setting the parameter, and optional/mandatory attribute of the
parameter in each command
Functions, functioning ways, and protocols of the parameter
Relevant feature ID
Features using the parameter
Parameter value type
Parameter value range displayed on the GUI
Actual parameter value range corresponding to the GUI Value Range. For example,
the GUI Value Range is 0, and the corresponding Actual Value Range is OFF.
Downlink Quality
Threshold in SET Downlink quality level threshold for
ABCDownQu Assigning Better GCELLHOAD the MS to be assigned with a GBFD-
ality Cell BSC6900 (Optional) channel of the better cell. 110502
Uplink Quality
The maximum duration for the
Threshold in SET Uplink quality level threshold for
BSC to select the best cell
ABCUpQualit Assigning Better GCELLHOAD the MS to be assigned with a GBFD-
according to MRs in the MS
y Cell BSC6900 (Optional) channel of the better cell. 110502
assigning procedure. The BSC
assigns the channel of the serving
Maximum Better SET cell to the MS if the best cell is not
ABCWaitMax Cell Assigning GCELLHOAD selected within the duration GBFD-
Time Duration BSC6900 (Optional) Whether
specified to bypermit Abis flow
this parameter. 110502
control.
Whether to enable the BTS to
The flow control function helps in
support bypass function. HDLC
better call management. If
ABISBYPASS Abis ByPass ADD BTS and IP BTS do not support GBFD-
congestion occurs, the system
MODE Mode BSC6900 BTS(Optional) Used along with "Abis Flow Control
this parameter. 116601
lightens its load by rejecting some
Timer 2" to control the change in
services or prolonging the time for
cell flow control levels.When the
SDCCH SET service requests. The Abis flow
flow control level in the cell
Congestion Flow GCELLCCCH control is used to lighten the GBFD-
changes, the values of MS MAX
ABISFCEN Control Allowed BSC6900 (Optional) Used
system along
loadwith "Abis
caused byFlow
AbisControl
flows. 111705
Retrans and Tx-integer in the
Timer 1" to control the change in
system information are changed
cell flow control levels.When the
SET accordingly.
flow control level in the cell
Abis Flow BSCTMR(Opti When immediate assignment fails, GBFD-
changes, the values of MS MAX
AbisFCTimer1 Control Timer 1 BSC6900 onal) the BSC6900 starts T1 and T2. 111705
Retrans and Tx-integer in the
system information are changed
SET This parameter controls whether
accordingly.
Abis Flow BSCTMR(Opti the
When strategy
immediatefor timeslot
assignment fails, GBFD-
AbisFCTimer2 Control Timer 2 BSC6900 onal) configuration
the BSC6900 and startsoptimization
T1 and T2.is 111705
started. When this parameter is set
This parameter controls the
to ON, the
Interval bundled
between idle timeslots
detection of the
SET strategy for idle timeslot selection
for
Abis the PS channel
timeslot being should
in idle be
ABISIDLETS Abis Idle TS BTSOTHPAR and optimization by the PSstate GBFD-
allocated
and to the
releasing ofsame
the Abis 64 kbit/s
timeslot.
ALLOC Allocate Strategy BSC6900 A(Optional) channels.
This parameter specifies whether 114201
timeslot
When channels are idle,link.
as the primary theWhen
timer
to
thisenable
parameterthe Abis
is theresource
set to OFF, the
is started. When timer expires,
SET adjustment
idle channels TCHH
are function.
allocated
the Abis timeslot is released. When
ABISIDLETS Abis Idle TS BTSOTHPAR It specifiesinwhether
randomly the the TCHH
transport pool is
all the TBFs on the channel areof a GBFD-
CFGSWITCH Configure Switch BSC6900 A(Optional) preferentially
site. allocated to the MS 114201
released,
Thresholdthe for Abis
enablingtimeslot is not
the BTS
by the BSC6900 when Abis
released at once.
local switching. WhenInstead,the the
resources are insufficient.
Abis Jam Rate SET timer is started
congestion ratewhen
at thethe Abischannels
If the Abis resource load is greater
AbisJamThres for BTS Local BSSLS(Optio are idle. Before
interface exceeds thethistimer expires, if
threshold, GBFD-
than "Flex Abis Prior Choose Load
hold2StartLs Switch BSC6900 nal) new
the BTS service
localrequest
switching is received
is enabled. 117702
Thred" or "Fix Abis Prior Choose
and the Abis timeslot is occupied,
SET Abis Load Thred" when the
then the timer is stopped;
ABISRESADJ BTSFLEXABI parameter is set to "YES", the
otherwise, the timeslot is released
TCHHFUNS TCHH Function SPARA(Optio BSC6900 preferentially allocates GBFD-
after the timer expires.
W Switch BSC6900 nal) the TCHH to the MS. 117301
When "Number of Dynamic
Channel Pre-Converted" is greater
Timer of SET than 0, the Abis timeslots are not
ABISTSFREE Releasing Abis GCELLPSCH released after the static PDCH and GBFD-
TM Timeslot BSC6900 M(Optional) pre-converted PDCH are idle. 113101
Mean opinion score (threshold) for
judging an abnormal call. The BTS
computes the MOS of a call
periodically and reports the call
SET MOS to the BSC in custom
Abis Interface BSCBASIC(O measurement
Phase tag for GSMreports. According
protocols thatto MRFD-
AbisVer Tag BSC6900 ptional) the Abis
call MOS, the BSC
interface checks
supports 210301
whether the call is normal. If the
Duration of BTS
call MOS is less than this
Collecting ADD Duration available for the BTS to
threshold, the BSC considers the
AB[100 AISSCFG(Opt collect the AB after the TRX or GBFD-
call abnormal and records the
ABLASTTIME Millisecond] BSC6900 ional) channel is activated 118201
abnormity in the call history record
(CHR).
SET To prevent the impact of a decimal
AbnormalMos Abnormal Voice OTHSOFTPA fraction, set this parameter to the GBFD-
Threshold MOS Threshold BSC6900 RA(Optional) product of 50 and the actual MOS. 116801
Access pulse type of the PRACH,
uplink PTCCH and packet control
SET acknowledge message of the MS.
Access Burst GCELLPSBA 8bit: 8 bit pulse access mode; GBFD-
ACCBURST Type BSC6900 SE(Optional) 11bit: 11 bit pulse access mode. 119110
SET
ACCCONTR Access Control GCELLPRAC GBFD-
Subcell preferred during the
OLCLASS Class BSC6900 H(Optional) Access control class of the MS 119110
incoming inter-BSC handover to
the concentric cell. In the case of
Incoming-to-BSC SET incoming inter-BSC handover to
ACCESSOPT HO Optimum GCELLHOIU the concentric cell, the channels in GBFD-
ILAY Layer BSC6900 O(Optional) this subcell are preferred. 113201
SET
GCELLPSOT
Whether to compress the address
AccStaServic PS Initial Access HERPARA(Op Whether the initial service is GBFD-
ADD and control fields. If this parameter
eType Service Type BSC6900 tional) uplink, downlink or neutral 119501
PPPLNK(Opti is set to
Used forENABLE, the address
notifying MSs where toand
onal) control area compression
retrieve relevant parameters is during GBFD-
Address and ADD enabled. If this
cell reselection. parameter is set to 118611
control field MPGRP(Optio This parameteraddress
DISABLE, specifies whether
ADD The defaultthe value of thisand control
parameter GBFD-
ACFC compress BSC6900 nal) to receive
area the CS paging
compression is request
disabled. 118622
BTSPPPLNK( is 0 in system message 3 and, has
from A interface when the MS uses
Optional) no special significance.
a PS service. This parameter is
Support Address ADD In system
A flag messageWhether
bit indicates 4, if the to
value
used to control the paging
and Control Field BTSMPGRP( of this parameter
support is 0, it means
the compression of the GBFD-
collaboration function of A interface
ACFC Compress BSC6900 Optional) that the MSs
address must retrieve
and control fields. the PI 118611
of the entire BSC. This parameter
parameters and other parameters
SET specifies whether to forward the
relevant to cell reselection and the
ACOOPERAT A Interface BSCPSSOFT paging message of the A interface
parameters relevant to C2
PAGINGSWIT Paging Co- PARA(Option from the circuit domain to the PS GBFD-
calculation from the remaining
CH ordination Switch BSC6900 al) domain . 119305
bytes of system message 4.If the
Additional value is 1, it means that the MS
Reselect SET must retrieve the parameters from
Parameter GCELLIDLEA the remaining bytes of system GBFD-
ACS Indication BSC6900 D(Optional) message 7 or 8. 110402
Active coding set (ACS)[F],
indicates a set of full-rate coding
SET rates currently available for calls.
GCELLCCAM The AMR is a set of multiple GBFD-
ACTCDSETF AMR ACS[F] BSC6900 R(Optional) speech coding and decoding rates. 115501
Active coding set (ACS)[H],
indicates set of half-rate coding
SET rates currently available for calls.
GCELLCCAM The AMR is a set of multiple GBFD-
ACTCDSETH AMR ACS[H] BSC6900 R(Optional) Whether to activate
speech coding the function
and decoding of
rates. 115502
Active coding set (ACS)[WB],
L2 re-establishment. If this function
indicates a set of wide-band
is activated, the BSC starts the
SET coding rates currently available for
attempt of L2 re-establishment
ACTCDSETW GCELLCCAM calls. The AMR is a set of multiple GBFD-
when the BSC receives an ERR
B AMR ACS[WB] BSC6900 R(Optional) speech coding and decoding rates. 115507
IND message reported by the BTS
in a conversation of MSs. If the L2
SET re-establishment succeeds, the
ACTL2REES Activate L2 Re- GCELLSOFT( conversation continues; otherwise, GBFD-
T establishment BSC6900 Optional) AC voltage
a call alarm lower threshold.
drop occurs. 110501
When the input AC voltage is lower
than the value of this parameter,
Valid Time of ADD
an alarm indicating the abnormal
BTS Resource AISSCFG(Opt Valid duration of the reserved TRX GBFD-
AC is reported.
ACTTIME Activation BSC6900 ional) or timeslot 118201
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
AC Voltage BTSAPMUBP the corresponding parameter in GBFD-
ACVLTHD Lower Threshold BSC6900 (Optional) another mode. 111202
SET
AECDetectTh AEC Detect TCPARA(Opti Threshold for detecting the AEC GBFD-
reshold Threshold BSC6900 onal) performance 115602
SET
AECDetectTi TCPARA(Opti Time for detecting the AEC GBFD-
me AEC Detect Time BSC6900 onal) performance 115602
Counter for radio link failures
during an AMR full rate call. See
SET the description of "Radio Link
AFRDSBLCN AFR Radio Link GCELLCCBA Timeout" in "SET GBFD-
T Timeout BSC6900 SIC(Optional) GCELLCCBASIC". 115505
Number of SACCH multiframes
during an AMR full rate call. See
SET the description of "SACCH Multi-
AFRSAMULF AFR SACCH GCELLCCBA Frames" in "SET GBFD-
RM Multi-Frames BSC6900 SIC(Optional) GCELLCCBASIC". 115505
ADD
AGPSRECEI GPS(Mandato
VERID GPS ID BSC6900 ry) GPS receiver ID None
ADD
AGPSRECEI GPS(Mandato
VERTYPE GPS type BSC6900 ry) GPS receiver type. None
Counter for radio link failures
during an AMR half rate call. See
SET the description of "Radio Link
AHRDSBLCN AHR Radio Link GCELLCCBA Timeout" in "SET GBFD-
T Timeout BSC6900 SIC(Optional) GCELLCCBASIC". 115505
Number of SACCH multiframes
during an AMR half rate call. See
SET the description of "SACCH Multi-
AHRSAMULF AHR SACCH GCELLCCBA Frames" in "SET GBFD-
RM Multi-Frames BSC6900 SIC(Optional) GCELLCCBASIC". 115505
SET
ALMPORT(M MRFD-
AID Alarm ID BSC6900 andatory) Alarm ID 210304
SET
ALMLVL(Man
SET
datory)
ALMBLKPAR MRFD-
SET
AID Alarm ID BSC6900 A(Mandatory) Alarm ID 210304
ALMSHLD(Ma
ndatory)
SET Identifier of the alarm. This
BOXRPT(Man parameter uniquely identifies an MRFD-
AID Alarm ID BSC6900 datory) alarm. 210304
ADD
Alarm Select OBJALMSHL MRFD-
AIDST Type BSC6900 D(Optional) Type of alarm selection 210304
ADD
BTSOBJALM
Alarm Select SHLD(Mandat MRFD-
Whether to trace A-interface
AIDST Type BSC6900 ory) Alarm selection mode 210304
messages during end-to-end user
SET tracing. The end-to-end tracing is
A Interface Msg OTHSOFTPA conducted throughout the network.
AInterMsgTra [End2end User RA(Mandatory The A-interface tracing results can GBFD-
ce Tracing] BSC6900 ) be obtained from the MSC or BSC. 116401
SET
AINTFFCRSR A IF FC Service BSCFCPARA( Rate of discarded services in level GBFD-
ATE1 Rate in Level 1 BSC6900 Optional) 1 of the A interface flow control 111705
SET
AINTFFCRSR A IF FC Service BSCFCPARA( Rate of discarded services in level GBFD-
ATE2 Rate in Level 2 BSC6900 Optional) 2 of the A interface flow control 111705
SET
AINTFFCRSR A IF FC Service BSCFCPARA( Rate of discarded services in level GBFD-
ATE3 Rate in Level 3 BSC6900 Optional) 3 of the A interface flow control 111705
SET
AINTFFCRSR A IF FC Service BSCFCPARA( Rate of discarded services in level GBFD-
ATE4 Rate in Level 4 BSC6900 Optional) 4 of the A interface flow control 111705
SET
AINTFFCRSR A IF FC Service BSCFCPARA( Rate of discarded services in level GBFD-
ATE5 Rate in Level 5 BSC6900 Optional) 5 of the A interface flow control 111705
SET
AINTFFCRSR A IF FC Service BSCFCPARA( Rate of discarded services in level GBFD-
ATE6 Rate in Level 6 BSC6900 Optional) 6 of the A interface flow control 111705
CSD service redundancy level,
CSD Service SET which is configured to decrease
AIPCSDSRV Redundancy BSCBASIC(O the data loss rate during GBFD-
RDNDLEV Level BSC6900 ptional) transmission in A over IP mode. 118602
SET
ALC_Fix_Gai TCPARA(Opti Fixed gain value in fixed gain GBFD-
n ALC Fix Gain BSC6900 onal) mode 115601
SET
This parameter restrains the
ALC_Fix_Targ ALC Fix Target TCPARA(Opti GBFD-
maximum gain to the input signal.
et_Level Level BSC6900 onal) Target level in fixed level mode 115601
It is valid only when "ALC Mode" is
"FIXEDLEVEL" or "ADAPTIVE". If
SET the parameter is set to a small
ALC_Max_Ga TCPARA(Opti value, it may affect the GBFD-
in ALC Max Gain BSC6900 onal) conformance to the target level. 115601
SET
ALC_Max_Tar ALC Max Target TCPARA(Opti Maximum target level in adaptive GBFD-
get_Level Level BSC6900 onal) ALC mode 115601
SET
ALC_Min_Tar ALC Min Target TCPARA(Opti Mimumum target level in adaptive GBFD-
get_Level Level BSC6900 onal) ALC mode 115601
SET
TCPARA(Opti GBFD-
ALC_Mode ALC Mode BSC6900 onal) ALC level control mode 115601
SET
TCPARA(Opti Whether to enable the adaptive GBFD-
ALC_Switch ALC Switch BSC6900 onal) level control (ALC) function 115601
Retry times after the timer for the
reply from the peer expires during
the NSVC live test. If the reply is
not received after the system
SET resends the message according to
BSCNSPARA( retry times, the NSVC is regarded GBFD-
ALIVERETRY Alive Retry BSC6900 Optional) as faulty. 510002
SET
Antenna Altitude GCELLLCS(O Decimal part of the antenna GBFD-
ALTIDECI Decimal Part BSC6900 ptional) altitude 115402
ADD
GPS antenna GPS(Mandato Height of the specified GSP
ALTITUDE altitude BSC6900 ry) receiver antenna None
SET
Antenna Altitude GCELLLCS(O GBFD-
ALTITUDE Int Part BSC6900 ptional) Integer part of the antenna altitude 115402
ADD
ALTITUDEIM GPS antenna GPS(Mandato Height of the specified GSP
P altitude BSC6900 ry) receiver antenna None
SET
ALMLVL(Man
EXP Alarm severity. One or more
datory)
ALMLOG(Opti severities can be selected. By MRFD-
SET
ALVL Alarm Severity BSC6900 onal) default, all severities are selected. 210304
ALMSCRN(M
andatory)
SET Alarm severity. One or more
ENVALMPAR severities can be selected. By MRFD-
ALVL Alarm Severity BSC6900 A(Optional) default, all severities are selected. 210304
SET
Feed Tri. 0 TMA BTSDATUBP( Whether to supply power to the GBFD-
AMPC0 Configuration BSC6900 Optional) TMA on tributary 0 111202
SET
Feed Tri. 1 TMA BTSDATUBP( Whether to supply power to the GBFD-
AMPC1 Configuration BSC6900 Optional) TMA on tributary 1 111202
SET
Feed Tri. 2 TMA BTSDATUBP( Whether to supply power to the GBFD-
AMPC2 Configuration BSC6900 Optional) TMA on tributary 2 111202
SET
Feed Tri. 3 TMA BTSDATUBP( Whether to supply power to the GBFD-
AMPC3 Configuration BSC6900 Optional) TMA on tributary 3 111202
SET
Feed Tri. 4 TMA BTSDATUBP( Whether to supply power to the GBFD-
AMPC4 Configuration BSC6900 Optional) Whether to enable
TMA on tributary 4 the adaptive 111202
adjustment function of AMR
downlink threshold. After this
SET function is enabled, the BTS
Feed Tri. 5 TMA BTSDATUBP( Whether
estimatestothesupply powervoice
long-term to the GBFD-
AMPC5 Configuration BSC6900 Optional) TMA on tributary 5
quality (indicated by the long-term 111202
FER(frame erase ratio)) and
SET compares the estimated
Maximum degree result
by which the with
AMRBTSPW AMR BTS PC GCELLPWR2 the
BSCspecified target
can control thevoice
powerquality.
of the If GBFD-
RNUM Class BSC6900 (Optional) the
AMR estimated result does not
BTS dynamically 115503
conform to the target voice quality,
Whether to enable the III power
it indicates that the current AMR
SET control algorithm for AMR calls. If
handover threshold may not be the
AMRCALLPC Allow III Power GCELLPWR3 enabled, power control is GBFD-
best for the current radio
ALLOWED Control For AMR BSC6900 (Optional) Number
performed of on
measurement
AMR calls. reports 117601
conditions. In this case, the
sampled for averaging downlink
AMR Downlink BSC6900 adjust threshold
AMR signal strength. A single
Adaptive SET adaptively according to the relation
measurement report may not
AMRDADTHA Threshold GCELLCCAM between the estimated voice GBFD-
reflect the actual network
W Allowed BSC6900 R(Optional) quality and the target voice quality. 115506
situations accurately. Therefore,
the BSC needs to average the
AMR Filter SET measured values in several
AMRDLLEVF Length for DL GCELLPWR2 successive measurement reports GBFD-
TLEN RX_LEV BSC6900 (Optional) to reflect the radio environment. 115503
To prevent late power control to a
certain degree, the power control
algorithm involves a measurement
report prediction filter. The BSC
can sample several downlink
Quality level threshold for
measurement reports in a short
decreasing downlink AMR signal
time and filter them according to a
power. If the BTS transmits AMR
specific weight to predict future N
signals at a quality level less than
AMR DL MR. SET Quality
measurement level threshold
reports. for
"AMR DL Qual. Upper Threshold",
AMRDLPRED Number GCELLPWR2 increasing
This parameter downlink AMRthe
specifies signal GBFD-
the BSC decreases the power of
LEND Predicted BSC6900 (Optional) power.
numberIfN. the BTS transmits AMR 115503
the BTS. If (downlink receive level
signals at a quality level greater
-Upper
"AMRthreshold
MAX Down for Adj. PC Value
downlink
than "AMR DL Qual. Lower AMR
SET by
signalQual.") <
strength. "AMR DL RX_LEV
Threshold", the BSC increases the
AMRDLQHTH AMR DL Qual. GCELLPWR2 Lower
If Threshold",
the downlink the BSC
received AMR does GBFD-
power of the BTS. If (downlink
RED Upper Threshold BSC6900 (Optional) Number
not
signaladjust ofthe
level measurement
is transmitthan
greater reports
power.this 115503
receive level + "AMR MAX Up Adj.
sampled
threshold, for
a averaging
power downlink
PC Value by Qual.")decrease
> "AMR DL is
AMR
computed.signal quality. A
Then,Threshold", single
the power is
SET RX_LEV Upper the
measurement
decreased report
by the leastmay not
AMRDLQLTH AMR DL Qual. GCELLPWR2 BSC does not adjust theoftransmit
the GBFD-
reflect
power the actual network
decrease, maximum power
RED Lower Threshold BSC6900 (Optional) power. 115503
situations
adjustmentaccurately.
step allowed Therefore,
by the
the BSC needs
quality to average the
During zonedownlink to which
power the received
control, if
AMR Filter SET measured
signal values
quality receive in
belongs, several
and "AMR
the downlink quality level is
AMRDLQUAF Length for DL GCELLPWR2 successive
MAX measurement reports GBFD-
equalDown Adj. PCthan
to or greater Value thisby
TLEN Qual. BSC6900 (Optional) to reflect the radio environment.
Qual.". 115503
threshold, "AMR DL RX_LEV
Power decrease =isdownlink
Upper Threshold" increased by
During downlink power control, if
AMR DL Qual SET received
"AMR DLsignal Qual Bad levelUpLEVDiff"
- ("AMR DLto
the downlink receive quality level is
AMRDLQUAL Bad Trig GCELLPWR2 RX_LEV
further Upper Threshold"
increase the expected + GBFD-
Lower
equal to threshold
or greater forthan
downlink
"AMRAMR DL
BADTRIG Threshold BSC6900 (Optional) "AMR
downlink DL power
RX_LEV Lower
level. 115503
signal
Qual Bad strength.
Trig Threshold", "AMR
Threshold")/2
If
DLthe downlink
RX_LEV received
Upper AMR is
Threshold"
The maximum power adjustment
SET signal
increased levelbyis"AMR
less than this Bad
DL Qual
step allowed by the quality zone is
AMRDLQUAL AMR DL Qual GCELLPWR2 threshold,
UpLEVDiff"a to power
further increase
increase is the GBFD-
chosen from "AMR MAX Down Adj.
BADUPLEV Bad UpLEVDiff BSC6900 (Optional) computed.
expected downlinkThen, the power
power is
level. 115503
Value Qual. Zone 0", "AMR MAX
increased by the least of the power
Down Adj. Value Qual. Zone 1",
increase, "AMR MAX Up Adj. PC
AMR DL SET and "AMR MAX Down Adj. Value
Value by RX_LEV", and "AMR
AMRDLSSHT RX_LEV Upper GCELLPWR2 Qual. Zone 2" according to the GBFD-
MAX Up Adj. PC Value by Qual.".
HRED Threshold BSC6900 (Optional) quality zone. 115503
Power increase = ("AMR DL
RX_LEV Upper Threshold" +
AMR DL SET "AMR DL RX_LEV Lower
AMRDLSSLT RX_LEV Lower GCELLPWR2 With "F-H Ho Period"
Threshold")/2 - downlink andreceived
the GBFD-
HRED Threshold BSC6900 (Optional) duration
signal level. for triggering handover 115503
from full rate to half rate, this
parameter determines the current
AMRFULLTO SET Whether to enable the algorithm
ATCB offset by which to choose
HALFHOALL AMR F-H Ho GCELLHOBA for the load-based AMR handover GBFD-
the MSs to undergo handover from
OW Allowed BSC6900 SIC(Optional) between full rate and half rate 510501
full rate to half rate.
ATCB offset = (duration for
AMRFULLTO AMR F-H Ho SET With "F-H handover
triggering Ho Period"from andfulltherate to
HALFHOATC ATCB Adjust GCELLHOBA duration
half rate/"F-Hfor triggering
Ho Period" handover
+ 1) x GBFD-
ATCB threshold for the AMR
BADJSTEP Step BSC6900 SIC(Optional) from
"AMRfull F-HrateHotoATCBhalf rate,
Adjust thisStep" 510501
handover from full rate to half rate.
parameter determines the current
If the ATCB of an AMR full rate call
path loss offset by which to choose
AMRFULLTO SET is equal to or greater than this
the MSs to undergo handover from
HALFHOATC AMR F-H Ho GCELLHOBA threshold, the AMR call is handed GBFD-
full rate to half rate.
BTHRESH ATCB Threshold BSC6900 SIC(Optional) over from full rate to half rate. 510501
Path loss offset = (duration for
triggering handover from full rate to
AMRFULLTO AMR F-H Ho SET half rate/"F-H Ho Period" + 1) x
HALFHOPAT Pathloss Adjust GCELLHOBA "AMR F-H Ho Pathloss Adjust GBFD-
HADJSTEP Step BSC6900 SIC(Optional) Step" 510501
Path loss threshold for the AMR
handover from full rate to half rate.
If the path loss of an AMR full rate
AMRFULLTO AMR F-H Ho SET call is equal to or less than this
Quality threshold for the AMR
HALFHOPAT Pathloss GCELLHOBA threshold, the AMR call is handed GBFD-
handover from full rate to half rate.
HTHRESH Threshold BSC6900 SIC(Optional) over from full rate to half rate. 510501
If the uplink and downlink receive
quality levels of an AMR full rate
AMRFULLTO SET call are equal to or less than this
HALFHOQUA AMR F-H Ho GCELLHOBA threshold, the AMR call is handed GBFD-
LTHRESH Qual. Threshold BSC6900 SIC(Optional) over from full rate to half rate. 510501
Load threshold for the AMR
handover from full rate to half rate.
AMRFULLTO SET If the cell load is greater than this
HALFHOTHR AMR F-H Traffic GCELLHOBA threshold, the AMR full rate calls GBFD-
ATCB threshold for the AMR
ESH Threshold BSC6900 SIC(Optional) are handed over to half rate. 510501
handover from half rate to full rate.
If the ATCB of an AMR half rate
AMRHALFTO SET call is less than this threshold, the
FULLHOATC AMR H-F Ho GCELLHOBA AMR call is handed over from half GBFD-
Path loss threshold for the AMR
BTHRESH ATCB Threshold BSC6900 SIC(Optional) rate to full rate. 510501
handover from half rate to full rate.
If the path loss of an AMR half rate
AMRHALFTO AMR H-F Ho SET call is greater than this threshold,
FULLHOPAT Pathloss GCELLHOBA the AMR call is handed over from GBFD-
HTHRESH Threshold BSC6900 SIC(Optional) half rate to full rate. 510501
Whether to enable the algorithm
AMRHALFTO Allow AMR H-F SET for the uplink and downlink receive
Quality threshold for the AMR
FULLHOQUA Quality-based GCELLHOBA quality based AMR handover from GBFD-
handover from half rate to full rate.
LALLOW HO BSC6900 SIC(Optional) half rate to full rate 510501
If the receive quality level of an
AMR half rate call is greater than
AMRHALFTO SET this threshold, the AMR call is
FULLHOQUA AMR H-F Ho GCELLHOBA handed over from half rate to full GBFD-
LTHRESH Qual. Threshold BSC6900 SIC(Optional) rate. 510501
Load threshold for the AMR
handover from half rate to full rate.
AMRHALFTO SET Maximum stepisbyless
If the cell load which
than the power
this
FULLHOTHR AMR H-F Traffic GCELLHOBA can be decreased
threshold, the AMRwhen the calls
half rate GBFD-
ESH Threshold BSC6900 SIC(Optional) received
are handed signal
overquality
to full belongs
rate. to 510501
quality zone 0.
Huawei power control algorithm
AMR MAX Up SET Maximum step by which the power
generation II classifies the
AMRMAXADJ Adj. PC Value by GCELLPWR2 can be decreased when the to
increased according GBFD-
received signal quality into three
PCVAL Qual. BSC6900 (Optional) received signal quality belongs to 115503
quality zones. The maximum step
quality zone 1.
by which the power can be
Huawei power control algorithm
AMR MAX Down SET Maximum
decreasedstep by which
according the power
to signal
generation II classifies the
AMRMAXSTE Adj. Value Qual. GCELLPWR2 can
levelbe decreased
varies accordingwhen to the quality GBFD-
received signal quality into three
P0 Zone 0 BSC6900 (Optional) received
zones. signal quality belongs to 115503
quality zones. The maximum step
quality zone 2.
by which the power can be
Huawei power control algorithm
AMR MAX Down SET decreased according to signal
generation II classifies the
AMRMAXSTE Adj. Value Qual. GCELLPWR2 level varies according to the quality GBFD-
received signal quality into three
P1 Zone 1 BSC6900 (Optional) zones. 115503
quality zones. The maximum step
by which the power can be
AMR MAX Down SET decreased according to signal
AMRMAXSTE Adj. Value Qual. GCELLPWR2 level varies according to the quality GBFD-
P2 Zone 2 BSC6900 (Optional) zones. 115503
decision, the BSC samples and
weights the received signal level
and quality in several history
measurement reports. The
MS/BTS transmit power may vary
over these measurement reports.
To ensure the accuracy of the
received signal level and quality to
AMR MAX Up SET Maximum step by which the power
be weighted, the power control
AMRMAXVAL Adj. PC Value by GCELLPWR2 can be increased according to GBFD-
algorithm needs to compensate
ADJRX RX_LEV BSC6900 (Optional) received signal level 115503
the received signal level and
quality in the history measurement
AMR MR. SET reports where the transmit power
AMRMRCOM Compensation GCELLPWR2 differs from the current transmit GBFD-
PREG Allowed BSC6900 (Optional) power. 115503
SET
TCPARA(Opti Whether to enable the adaptive GBFD-
ANC_Switch ANC Switch BSC6900 onal) noise cancel (ANC) function 115603
The system adjusts the remote
SET input so that the ratio of the remote
ANC_Target_ TCPARA(Opti signal to the local noise is above GBFD-
SNR ANC Target SNR BSC6900 onal) the value of this parameter. 115603
ADD
SET
ADJNODE(M
BTSANTANG
andatory)
RET Antenna Tilt LE(Mandatory MRFD-
ADD
ANGLE Angle BSC6900 ) Tilt angle of the RET antenna 210602
IPPATH(Mand
atory)
ADD
Adjacent Node ADJMAP(Man Uniquely identifies an adjacent GBFD-
ANI ID BSC6900 datory) node 118605
ADD
IPMUX(Mand
atory)
ADD
IPPATHBIND( Adjacent node identifier of this IP
ANI Adjacent node ID BSC6900 Mandatory) path None
SET
ENVALMPAR MRFD-
ANM Alarm Name BSC6900 A(Optional) New name of the alarm 210304
SET
TCPARA(Opti GBFD-
ANR_Mode ANR Mode BSC6900 onal) ANR mode 115603
This parameter determines the
noise depression degree. A large
ANR_Noise_ SET absolute value of this parameter
Reduction_Le ANR Noise TCPARA(Opti corresponds to a strong GBFD-
vel Reduction Level BSC6900 onal) depression. 115603
SET
ANR_Noise_T ANR Noise TCPARA(Opti GBFD-
arget_Level Target Level BSC6900 onal) ANR target noise level 115603
SET
TCPARA(Opti Whether to enable the adaptive GBFD-
ANR_Switch ANR Switch BSC6900 onal) noise restrain (ANR) function 115603
Length of the feeder cable. The
GPS satellite card is connected to
SET
the antenna through feeder cables.
Antenna Azimuth GCELLLCS(O Size of the azimuth angle of the GBFD-
SET The transmission delay on the
ANTAANGLE Angle BSC6900 ptional) cell antenna 115402
BTSDGPSBP( feeder cable can be calculated on
Optional) the basis of the length of the
SET feeder cable, thus increasing the
ANTENNALO GPS Antenna BTSUSCUBP( timing accuracy of the satellite GBFD-
SET
NG Delay BSC6900 Optional) card. 510401
BTSDGPSBP(
Optional)
SET
ANTENNAPO Antenna Power BTSUSCUBP( Power supply switch of the GPS GBFD-
WERSWITCH Supply Switch BSC6900 Optional) antenna feeder 510401
GBFD-
ADD 118611
ANTIERRFLA E1T1 anti-error MPGRP(Optio GBFD-
G switch BSC6900 LOD
nal) E1T1 anti-error switch. 118622
RETANTCFG(
Mandatory)
Burglar Alarm SET Whether to enable the BTS to
SET
Auto Clear BTSTHEFTAL clear the burglar alarm GBFD-
BTSANTANG
AntiTheftAllow Permit BSC6900 M(Optional) automatically 111202
LE(Mandatory
)
SET
RETANTENB( MRFD-
ANTNO Antenna No. BSC6900 Mandatory) Number of the antenna 210602
ADD
TRXBIND2PH
YBRD(Mandat Number of the antenna feeder GBFD-
ANTPASSNO Antenna Pass No BSC6900 ory) channel mapped to the RXU 111202
Antenna pass No. of the RXU of a
ADD sub-location group. The parameter
ADD
Sub-Location BTSBINDLOC is configured only when the MRRU
BTSANTFEE
Group Antenna GRP(Optional or GRRU is used in the sub- GBFD-
DERBRD(Ma
ANTPASSNO Pass No. BSC6900 ) location group. 510104
ndatory)
SET
BTSANTFEE
Down TRX1 A or DERCONNEC Antenna pass number of the GBFD-
AORB B BSC6900 T(Optional) downlink tributary 111202
ADD
SEMILINK(Ma Application type of the semi- GBFD-
APPTYPE Application Type BSC6900 ndatory) permanent link 114701
Update frequency of the value N
SET (packet drop interval), indicating
BSCPSSOFT that the packet drop interval is
AQM N Update PARA(Option updated after N packets are GBFD-
Upper length threshold of the TBF
AqmM Interval BSC6900 al) transmitted.
Initial value of Ifthe 119904
buffer queue. theinterval
length of the
SET (indicated
TBF bufferby N) atexceeds
queue which the this
BSCPSSOFT packets
threshold,in whether
the TBF the buffer queueare
packets
Congestion threshold of the TBF
AQM Maximum PARA(Option are discarded.
discarded The valueaccording
is determined N GBFD-
buffer queue. If the congestion
AqmMaxTh Threshold BSC6900 al) indicates the frequency
to the packet discardingof policy. 119904
level in the TBF buffer queue
discarding the packets in the TBF
SET exceeds this threshold, whether
buffer queue. The greater the
BSCPSSOFT the packets are discarded actively
value N, the lower the frequency of
AQM Congestion PARA(Option is determined according to the GBFD-
discarding packets, and the
AqmMinTh Threshold BSC6900 al) packet discarding policy. 119904
smaller the number of discarded
SET packets within a certain period.
AQM Packet BSCPSSOFT The smaller the value N, the
Discard Initial PARA(Option greater the number of discarded GBFD-
AqmNinit Interval BSC6900 al) packets. 119904
SET Lower threshold of the interval for
AQM Packet BSCPSSOFT discarding the packets in the TBF
AqmNLowerB Discard Interval PARA(Option buffer queue, that is, the minimum GBFD-
ound Lower Threshold BSC6900 al) value of N (packet drop interval). 119904
SET Upper threshold of the interval for
AQM Packet BSCPSSOFT discarding the packets in the TBF
AqmNUpBoun Discard Interval PARA(Option buffer queue, that is, the maximum GBFD-
d Upper Threshold BSC6900 al) value of N (packet drop interval). 119904
SET
BSCPSSOFT
PARA(Option GBFD-
AqmSwitch AQM Switch BSC6900 al) AQM switch 119904
SET
BSCPSSOFT
AQM Target PARA(Option Target threshold of the TBF buffer GBFD-
AqmTarTh Threshold BSC6900 al) queue 119904
Release statistics base for
SET subchannels. This parameter
BSCBASIC(O indicates
Local areathe number
code, of times that
for example, 021 MRFD-
CMP a
AreaCode Area Code BSC6900 ptional) forsubchannel
Shanghai is activated. In a 210301
BRDAREA(O timeslot, the release statistics
ptional) base, B, multiplied by the number
LOD of channels, N, is the channel
PATCH(Optio release sum, S. MRFD-
LOD
AREAFLAG Area flag BSC6900 nal) Area flag 210401
BRD(Optional If the percentage of the abnormal
Threshold for reporting the
) channel releases in the latest S
recovery alarm for the abnormal
SYN channel releases exceeds the
release alarm. If the percentage of
BRDAREA(O Abnormal Warn Threshold, the MRFD-
the abnormal channel releases is
AREAFLAG Area flag BSC6900 ptional) abnormal
Area flag release alarm is 210401
equal to or less than this threshold,
reported.
the recovery alarm for the
If the percentage of the abnormal
Abnormal SET abnormal release alarm is
channel releases in the latest S
Release GTRXRLALM( Threshold for reporting
reported. That the
is, the abnormal GBFD-
channel releases is equal to or
AREDISTHD Threshold BSC6900 Optional) abnormal release
release alarm alarm. In a
is cleared. 111004
less than the Abnormal Release
timeslot, the release statistics
Threshold, the recovery alarm for
base, B, multiplied by the number
Abnormal SET the abnormal release alarm is
of channels, N, is the channel
Release Statistic GTRXRLALM( reported. That is, the abnormal GBFD-
release sum, S. If the percentage
ARELBASE Base BSC6900 Optional) release alarm is cleared. 111004
of the abnormal channel releases
in the latest S channel releases
SET exceeds this threshold, the
Retransmission times upon ARP
Abnormal Warn GTRXRLALM( abnormal release alarm is GBFD-
timeout. When the ARP request
ARELWTHD Threshold BSC6900 Optional) reported. 111004
times exceeds the retransmission
time without a response, the
STR ARP/BFD detection failure alarm is
ARP packet IPCHK(Option reported. This may trigger the port
ARPRETRY resend times BSC6900 al) or board switchover. None
STR
ARPTIMEOU ARP packet time- IPCHK(Option
T out[100ms] BSC6900 al) ARP packet timeout time None
ADD
A interface slot MTP3LNK(Ma Number of the slot where the A GBFD-
ADD
ASN No. BSC6900 ndatory) interface board is located 111804
ATERSL(Opti
onal)
ADD
A interface slot ATERCONSL( Number of the slot where the A GBFD-
ASN No. BSC6900 Optional) interface board is located 111804
ADD
A interface MTP3LNK(Ma Number of the subrack where the GBFD-
EXP
ASRN subrack No. BSC6900 ndatory) A interface board is located 111804
ALMLOG(Opti
onal)
STA Network management type of the
ALMLOG(Opti alarm. By default, all network MRFD-
ASS Event Type BSC6900 onal) management types are selected. 210304
SET
ASSORXUSR Associated RXU BTSRXUBP( Number of the subrack where the GBFD-
N Board SRN BSC6900 Mandatory) associated RXU board is installed. 111202
automatic optimization of neighbor
cells and frequencies. The
measurement results in
Timer for waiting
measurement for a are
reports single A-
interface
screenedcircuit and countedblockingaccordingor
unblocking
to this threshold. answer. If the signal
The BSC6900
strength starts this
of a neighbor cellT1intimera
after sending areport
measurement singleisA-interface
greater
After the BSC6900 delivers an
Absolute Signal SET circuit
than thisblocking
threshold, or unblocking
the relevant
assignment command, the T3107
Strength OTHSOFTPA message. If thecounter
traffic statistics BSC6900 is does not GBFD-
timer starts. If the BSC6900
ASSThres Threshold BSC6900 RA(Optional) receive
incremented a blockingby one. or unblocking 510901
receives an assignment complete
answer from the MSC before this
message within the scheduled
timer expires for the first time, the
SET time, the T3107 timer stops. If the
BSC6900 resends the single A-
GCELLTMR(O timer expires, the BSC6900 sends GBFD-
interface circuit blocking or
ASSTIMER T3107 BSC6900 ptional) an assignment failure message. 110502
unblocking message to the MSC. If
the timer expires for the second
SET time, the BSC6900 reports an
BSCTMR(Opti alarm for BSC circuit blocking or GBFD-
AT1 T1 BSC6900 onal) unblocking failure. 111203
MSC reset protection timer, that is,
T17 timer. When receiving an MSC
interval between the time when the
overload message or a single point
SET BSC6900 receives an MSC reset
congestion message for the first
BSCAITFTMR message and the time when the GBFD-
time, the BSC6900 increases the
AT13 T13 -s BSC6900 (Optional) BSC6900 answer to the MSC. 111803
level of the A interface flow control
T18 timer. When receiving an MSC
and starts the T17 and T18 timers
overload message or a single point
SET at the for
Timer same time.for
waiting Timers
an T17 and
congestion message forA-interface
the first
BSCAITFTMR Timer
T18
Distance for
are waiting
set for
between for
adjusting
the an A-interface
the
boundary flowof GBFD-
circuit
time, group
the BSC6900blocking or
increases the
AT17 T17 -s BSC6900 (Optional) circuit
control
the reset
level
overlaid answer.
over
subcell the andA interface.
the 111705
unblocking
level of the A answer.
interface After flow sending
controla
The BSC6900
boundary starts this timer
CIC groupof
and starts the underlaid
and T18subcell.
blocking/unblocking
the T17 timers
after
This sending an A-interface circuit
SET at theparameter
message same over time. specifies
the A interface,
Timers the
T17 and the
reset message.
difference between When the this timer
coverage
BSCAITFTMR BSC6900 starts the
T18 are set for adjusting the flow timer T20. If GBFD-
expires
of the for the subcell
overlaid first time, thethe
AT18 T18 -s BSC6900 (Optional) the BSC6900
control level over failsthe Aand
to receive
interface. a 111705
BSC6900 of
coverage resends
thethe the circuit
underlaid reset
subcell
response from MSC before the
message
in the to the MSC.
concentric cell orIf dual-
this timer
first expiry of T20, the BSC6900
SET expires
frequency fornetwork
the second time, the
scenario. The
resends the CIC group
BSCTMR(Opti BSC6900
boundaries reports an
of the overlaid alarm for
and GBFD-
blocking/unblocking message. If no
AT19 T19 BSC6900 onal) BSC circuit
underlaid
Whether resetting
tosubcells
enable are
the failure.
determined
ATCBthe 111203
response is received
Hysteresis in the distance between before
according
handover
second to the
algorithm
expiry relative
oftheT20, forthethevalue
system
the boundary of overlaid
SET between
concentric
reports the signal
cell. strength
According to ofthethe
subcell and the boundary ofBlock
the BSC Unable to the
BSCTMR(Opti serving
neighbor
Group cell
celland
Circuits orthe
signal, BSC signal
theUnable
ATCB strength to GBFD-
underlaid subcell. This parameter
AT20 T20 BSC6900 onal) of the neighbor
handover
Unblock algorithm
Group cell. determines
CircuitsAssume alarm. thatthe 111203
helps to adjust "Distance Between
the signal of
coverage strength
the overlaidof thesubcellserving
Boudaries of Subcells" and thus to
cell
and is SS(s) and
balances thethatloadthe signal the
between
SET prevent ping-pong handover
strength of the neighbor
overlaid subcell, underlaid cell is
subcell,
BSCAITFTMR between
Timer for the
waitingoverlaidfor an and underlaid
A-interface GBFD-
SS(n). If SS(s)
and neighbor = SS(n),
cell. Therefore, the MS theis
AT4 T4 -s BSC6900 (Optional) subcells.
reset Assume that the signal
on theanswer
algorithm boundary
helps toofdecreasethe underlaid the
111803
strength of the serving cell is SS(s)
subcell.
interference,If SS(s) - SS(n) >
to improve the
and that the signal strength of the
Concentric SET "Distance
conversation Between
quality,Boudaries
and to of
neighbor cell is SS(n). If SS(s) -
Circles ATCB HO GCELLHOBA Subcells", the MS isfrequency
achieve aggressive in the GBFD-
SS(n) < "Distance Between
ATCBHOEN Allowed BSC6900 SIC(Optional) coverage
reuse in the of overlaid
the overlaid subcell.
subcell. 113201
Boudaries of Subcells" - "Distance
In the tight BCCH handover
Distance SET Hysteresis Between Boudaries",
algorithm, this parameter specifies
Hysteresis GCELLHOED the MS is handed over from the
the difference between the
Between BPARA(Optio overlaid subcell to the underlaid GBFD-
coverage of the TRX that carries
ATCBHYST Boundaries BSC6900 nal) subcell. 114402
the BCCH and the coverage of the
Distance SET TRX that does not carry the
Between GCELLHOED BCCH. The relevant computation
Boundaries of BPARA(Optio is the same as the preceding GBFD-
ATCBTHRED Subcells BSC6900 nal) computation. 114402
ADD
MTP3LNK(Ma
SET
ndatory) Whether to enable the BSC to use
Switch of 8K on OTHSOFTPA
ADD a 8 kbit/s timeslot to transmit 8 GBFD-
Ater8KSw Ater BSC6900 RA(Optional) Threshold
kbit/s data that determines
at the whether
Ater interface 116901
ATERE1T1(M
the Ater interface is congested.
andatory) Whether to enable the BSC to
The BSC determines whether to
ADD
SET assign half rate channels
assign full or half rate channels
AterCongHRF HR Allocation ATERCONPA
OTHSOFTPA preferentially when the Ater GBFD-
preferentially according to the
lag Flag BSC6900 TH(Optional)
RA(Optional) interface is congested 116901
congestion situations at the Ater
ADD
interface. If the Ater resource
ATERSL(Man
SET usage exceeds this parameter, the
datory)
AterCongstRa Congestion Ratio OTHSOFTPA Ater interface is considered GBFD-
ADD
tio on Ater Resource BSC6900 RA(Optional) congested. 116901
ATERCONSL(
Mandatory)
ADD
Ater connection SEMILINK(Ma GBFD-
ATERIDX path index BSC6900 ndatory) Index of an Ater connection path 111203
Threshold for enabling the BSC
ADD
local switching. When the
MTP3LNK(Ma
Ater Jam Rate SET congestion rate at the Ater
ndatory)
AterJamThres for BSC Local BSSLS(Optio interface exceeds this threshold, GBFD-
ADD
hold2StartLs Switch BSC6900 nal) the function is enabled. 117701
ATERSL(Man
Whether to configure the Ater OML
datory)
link used for the TC subrack for the
ADD
port. If it is actually configured and
ATERCONSL( GBFD-
you specify that it is not
ATERMASK Ater Mask BSC6900 Mandatory) Ater interface timeslot mask 111203
configured, the TC subrack fails to
start. If it is not configured and you
ADD specify that it is already
ATEROMLFL Whether or not SEMILINK(Ma configured, the crosstalk of the GBFD-
AG for OML BSC6900 ndatory) timeslot on the port occurs. 114701
ADD
ATEROMLIN ATEROML(Ma MRFD-
X Ater OML Index BSC6900 ndatory) Ater maintenance link index 210301
Antenna SET
ATTENFACT Tributary 1 BTSRXUBP( TMA attenuation factor of antenna GBFD-
OR1 Factor BSC6900 Optional) tributary 1 111202
Antenna SET
ATTENFACT Tributary 2 BTSRXUBP( TMA attenuation factor of antenna GBFD-
OR2 Factor BSC6900 Optional) tributary 2 111202
SET
E1T1LOP(Opt
AUSTOP Loop time[min] BSC6900 ional) It specifies the loopback duration. None
STR
E1T1TST(Opti
AUSTOP Test time[min] BSC6900 onal) It specifies the test duration. None
SET
SSLAUTHMO
Authentication DE(Mandatory SSL authentication mode of the MRFD-
AUTHMODE Mode BSC6900 ) peer certificate 210305
GBFD-
ADD 118611
PPPLNK(Man Validation mode of the PPP or MP GBFD-
AUTHMODE Validate mode BSC6900 datory) link negotiation 118622
GBFD-
ADD 118611
MPGRP(Man Validation mode of the PPP or MP GBFD-
ADD
AUTHMODE Validate mode BSC6900 datory) link negotiation 118622
BTSPPPLNK(
Mandatory)
ADD The PPP or MP link is as server or
BTSMPGRP( client when it negotiates with peer GBFD-
AUTHMODE Validate Mode BSC6900 Mandatory) link. 118611
GBFD-
ADD 118611
Validate user PPPLNK(Man Username to validate, for the PPP GBFD-
AUTHNAME name BSC6900 datory) or MP link negotiation 118622
GBFD-
ADD 118611
Validate user MPGRP(Man Username to validate, for the PPP GBFD-
AUTHNAME name BSC6900 datory) or MP link negotiation 118622
ADD
BTSPPPLNK(
Mandatory)
ADD
Validate User BTSMPGRP( Username to validate, for the PPP GBFD-
AUTHNAME Name BSC6900 Mandatory) or MLPPP link negotiation 118611
GBFD-
ADD 118611
Validate PPPLNK(Man Password to validate, upon PPP or GBFD-
AUTHPWD password BSC6900 datory) MP link negotiation 118622
GBFD-
ADD 118611
Validate MPGRP(Man Password to validate, upon PPP or GBFD-
ADD
AUTHPWD password BSC6900 datory) MP link negotiation
Whether the self-negotiation mode 118622
BTSPPPLNK(
Mandatory) is adopted
ADD 1. When the FG2 board is used
Validate BTSMPGRP( and the port
Password to type is GE,
validate, the PPP
upon self- or GBFD-
AUTHPWD Password BSC6900 Mandatory) negotiation
MLPPP link mode must be
negotiation 118611
adopted.
2. If the self-negotiation mode is GBFD-
ADD adopted, the FE port rate, working 118611
Validate protocol PPPLNK(Opti Type
modeofand validation protocol
flow control modeformust
the GBFD-
AUTHTYPE type BSC6900 onal) PPP or MP link negotiation
be in accordance with the 118622
negotiation result. If the self- GBFD-
ADD negotiation mode is not adopted, 118611
Validate protocol MPGRP(Optio the
TypeFE ofport rate, working
validation protocolmode
for the GBFD-
ADD
AUTHTYPE type BSC6900 nal) and
PPPflow control
or MP mode must be
link negotiation 118622
BTSPPPLNK(
specified. Make sure that the
Optional)
specified attributes are the same
ADD
as that of the peer. Otherwise,
Validate Protocol BTSMPGRP( Type of the validation protocol for GBFD-
transmission failure must be
AUTHTYPE Type BSC6900 Optional) the PPP or MLPPP link negotiation 118611
incurred.
3. If the self-negotiation mode is
SET adopted on the local system, the
ETHPORT(Op peer must use the self-negotiation
AUTO Auto negotiation BSC6900 tional) mode. None
LCK
Auto Unlock SCHTSK(Opti MRFD-
AUTOULKSW Switch BSC6900 onal) Auto unlock switch 210305
SET
ALMPORT(Op MRFD-
AVOL Alarm level BSC6900 tional) Alarm level for a digital port 210304
SET
BTSENVALM
PORT(Option Alarm level. It is valid for the digital MRFD-
Threshold of B1 and B2 signal
AVOL Alarm VOL. BSC6900 al) port. 210304
degrade. This parameter specifies
the generation threshold and the
B1B2 signal recovery threshold of the B1B2
B1B2SDTHR degraded SET signal degradation threshold in
Threshold of B1 and B2 signal
D threshold BSC6900 OPT(Optional) SDH frames at the optical port. None
failure. This parameter specifies
the generation threshold and the
recovery threshold of the B1B2
B1B2SFTHR B1B2 signal fail SET signal failure threshold in SDH
Threshold of B3 signal degrade.
D threshold BSC6900 OPT(Optional) frames at the optical port. None
This parameter specifies the
generation threshold and the
B3 signal recovery threshold of the B3 signal
degrade SET degradation threshold in SDH
Threshold of B3 signal failure. This
B3SDTHRD threshold BSC6900 OPT(Optional) frames at the optical port. None
parameter specifies the generation
threshold and the recovery
threshold of the B3 signal failure
B3 signal fail SET threshold in SDH frames at the
B3SFTHRD threshold BSC6900 OPT(Optional) optical port. None
BACK8KCLK Switch of SET MRFD-
SW1 backplane LINE1 BSC6900 CLK(Optional) Switch of backplane LINE1 210502
SET
BBAP service SCTPSRVPO Number of the BBAP service GBFD-
BBAPSRVPN listening port No. BSC6900 RT(Optional) listening port 113725
Battery capacity. The battery
Reference difference between
capacity should be set according
uplink and downlink levels. This GBFD-
to the vendor specification. If it is
Up Down SET parameter works with "Up Down 110801
improperly configured, the battery
Balance Basic GTRXRLALM( Balance Floating Range" to count GBFD-
life may be shortened.
BBDIF Difference BSC6900 Optional) uplink-downlink imbalances. 110802
In multi-mode scenario, the value
of this parameter in one mode
Base station color code (BCC) of a
SET must be the same as the value of
cell, provided by the network
BTSAPMUBP the corresponding parameter in GBFD-
planning department. It is used for
BC Battery Capcity BSC6900 (Optional) another mode. 111202
differentiating the neighboring cells
using the same BCCH frequency. A
Base station color code (BCC) of a
ADD BCC and a network color code
cell, provided by the network
GCELL(Optio (NCC) compose a base station MRFD-
planning department. It is used for
BCC BCC BSC6900 nal) identity code (BSIC). 210301
differentiating the neighboring cells
using the same BCCH frequency. A
ADD BCC and a network color code
GEXT2GCEL (NCC) compose a base station MRFD-
BCC BCC BSC6900 L(Mandatory) identity code (BSIC). 210301
ADD
GCELLQUICK BTS color code. It uniquely
SETUP(Optio identifies different BTSs that are MRFD-
BCC BCC BSC6900 nal) adjacent and use the same TRX. 210301
ADD
GEXT2GCEL MRFD-
BCCH BCCH FD BSC6900 L(Mandatory) BCCH frequency of the cell 210301
ADD
GCELLQUICK
Main BCCH SETUP(Mand GBFD-
BCCHFREQ Frequency BSC6900 atory) Frequency of the BCCH TRX 110101
SET
Frequency GCELLHOPQ
Hopping Mode of UICKSETUP( Frequency hopping mode of the GBFD-
BCCHTRXHP BCCH TRX BSC6900 Mandatory) TRX that carries the BCCH 113701
Threshold for reporting the BC
SET congestion alarm. When the BC
BSCPSSOFT congestion level exceeds the
BCCONGEST BC Congestion PARA(Option threshold, the BC congestion GBFD-
ALMBOUND Alarm Threshold BSC6900 al) alarm is reported. 510002
Threshold for clearing the BC
SET congestion alarm. When the BC
BCCONGEST BC Congestion STR
BSCPSSOFT congestion level is below the
RESALMBOU Restore Alarm FRPORTLOO
PARA(Option threshold, the BC congestion GBFD-
ND Threshold BSC6900 P(Mandatory)
al) alarm is cleared. 510002
BLK
SET
BC(Mandatory
BSCPSTCDS
)
DSCP of CPMAP(Optio DSCP corresponding to the GBFD-
ADD
BCDSCP BG[QoS] BSC6900 nal) background service 118603
BC(Mandatory
) Identifies one BC at the Gb
ADD interface board. The BCID's value
NSVC(Mandat range of PEUa board is 0~255 and GBFD-
BCID BC Identifier BSC6900 ory) that of POUc board is 0~511. 510002
"Battery Current Limiting
Coefficient" multiplexed by "Battery
Capacity". If the charging current is
5 A higher than the maximum
charging current, the overcharge
alarm is reported.
In multi-mode scenario, the value
of this parameter in one mode
Boost-Charging Voltage. See the
Battery Current SET must be the same as the value of
vendor specification for the setting
Limiting BTSAPMUBP the corresponding parameter in GBFD-
of this parameter.
BCLC Coefficient BSC6900 (Optional) another mode. 111202
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
Whether the configuration of
Boost-Charging BTSAPMUBP the corresponding parameter in GBFD-
external battery is allowed.
BCV Voltage BSC6900 (Optional) another mode. 111202
In multi-mode scenario, the value
of this parameter in one mode
Battery SET must be the same as the value of
Configuration BTSAPMUBP the corresponding parameter in GBFD-
BE Enabled BSC6900 (Optional) another mode. 111202
ARP1 priority in the BE service.
SET ARP1 priority weight determines
BEARP1PRI BestEffort-ARP1 GCELLPSCH the number of the budget blocks GBFD-
WEIGHT Priority Weight BSC6900 M(Optional) and the block scheduling priority. 119902
ARP2 priority in the BE service.
SET ARP2 priority weight determines
BEARP2PRI BestEffort-ARP2 GCELLPSCH DSP bearer of
the number type.
the budget blocks GBFD-
WEIGHT Priority Weight BSC6900 M(Optional) MTP3:
and theindicates that the lower
block scheduling priority. 119902
layer bearer is the MTP3 used in
ARP3 priority in the BE service.
ATM/TDM scenario;
SET ARP3 priority weight determines
M3UA: indicates that the lower
BEARP3PRI BestEffort-ARP3 GCELLPSCH the number of the budget blocks GBFD-
layer bearer is the M3UA used in
WEIGHT Priority Weight BSC6900 M(Optional) and the block scheduling priority. 119902
IP scenario;
MTP3_M3UA: indicates that the
ADD lower layer bearer is the MTP3 and
N7DPC(Mand M3UA used in ATM/TDM/IP GBFD-
BEARTYPE DSP bear type BSC6900 atory) scenario. 111804
SET
BETTERCEL Better Cell GCELLHOBA Whether to enable the algorithm GBFD-
LHOEN Handover Enable BSC6900 SIC(Optional) for the handover to a better cell 510501
According to the P/N rule, if the
conditions for the handover to a
better cell due to interference are
met for P seconds within N
Allowed
seconds,fluctuation
the handoverof theis
According
difference to the P/N rule, if the
ADD triggered. between uplink and
conditions
downlink for the
levels handover
relative tothe to a
the
BETTERCEL Better Cell HO G2GNCELL(O This parameter specifies GBFD-
better cell difference.
reference due to interference
If the are
LLASTTIME Valid Time BSC6900 ptional) number P. 510501
met for P seconds within
difference between uplink and N
seconds, the handover
downlink levels is outside is the
ADD triggered.
fluctuation range, the uplink and
BETTERCEL Better Cell HO G2GNCELL(O This parameter
downlink specifies the
are considered GBFD-
LSTATTIME Watch Time BSC6900 ptional) number N.
imbalanced. 510501
For example,
Timeout timesassume
of the BFDthatpacket.
the Up
STR Down Balance
If several Basic Difference
consecutive BFD is
BFDDETECT Detect multiplier IPCHK(Option set to 8 and
packets thatreceived,
are not the Up Down the BFD GBFD-
ADD
COUNT of BFD packet BSC6900 al) Balance
session isFloating Range
set to the DOWN is set to
state. 118609
BTSBFD(Man
30. If the difference between uplink
datory) Mutual-aid changeback policy of
and downlink levels is greater than
ADD baseband frequency hopping (FH).
38 (= 8 + 30) or less than -22 (= 8 -
BTSIPRTBIN If multiple TRXs in a baseband FH GBFD-
30), the uplink and downlink are
BFDSN BFD Session No. BSC6900 D(Mandatory) group are faulty
BFD Session No.and changeback is 118609
considered imbalanced. If the
needed after mutual aid of the
difference between uplink and GBFD-
baseband FH TRXs occurs: If you
Up Down SET downlink levels is between -22 and 110801
choose ALL, mutual-aid
Balance Floating GTRXRLALM( 38, the uplink and downlink are GBFD-
changeback is implemented after
BFRANGE Range BSC6900 Optional) considered balanced. 110802
all the TRXs in the FH group
Switchback SET recover; if you choose PART, as
Policy of GCELLCCAC long as any of the faulty TRXs
SET
BHPREPOLI Baseband FH CESS(Option recovers, it is changed back at GBFD-
BTSEXCURSI
CY Mutual Aid BSC6900 al) once and added to the FH group. 113801
ON(Mandator
y)
SET
In Frame Bit BSCSYNCOF Bit offset in the frame of the BTS GBFD-
BITOFFSET Offset [1/8 bit] BSC6900 F(Mandatory) clock 118201
ARP1 priority in the Background
service. ARP1 priority weight
Background- SET determines the number of the
BKGARP1PRI ARP1 Priority GCELLPSCH budget blocks and the block GBFD-
WEIGHT Weight BSC6900 M(Optional) scheduling priority. 119902
ARP2 priority in the Background
service. ARP2 priority weight
Background- SET determines the number of the
BKGARP2PRI ARP2 Priority GCELLPSCH budget blocks and the block GBFD-
WEIGHT Weight BSC6900 M(Optional) scheduling priority. 119902
ARP3 priority in the Background
service. ARP3 priority weight
Background- SET determines the number of the
BKGARP3PRI ARP3 Priority GCELLPSCH budget blocks and the block GBFD-
WEIGHT Weight BSC6900 M(Optional) scheduling priority. 119902
SET
Alarm blink filter threshold. When
BLKFILTERS Alarm switch of ALMBLKSW( Base Station Controller alarm blink MRFD-
the interval between the
W blinking filter BSC6900 Optional) filter switch 210304
generation and clearance of an
alarm is equal to or smaller than
SET the alarm blink filter threshold, the
Alarm blink ALMBLKPAR alarm is filtered and not reported to MRFD-
BLKPRD threshold BSC6900 A(Optional) the NMS. 210304
Observing time SET
window of ALMBLKSW( Measurement period of filtered MRFD-
BLKSTATPRD statistical alarm BSC6900 Optional) Base Station Controller alarms 210304
SET
BLOCKTIME BSCNSPARA( Duration of the peer response GBFD-
R Block Timer BSC6900 Optional) timer during NSVC blocking 510002
ADD Number of the port in the BM
ATERCONPA subrack where one end of the
TH(Mandatory ATER connection channel is
BMPN BM Port No BSC6900 ) located None
ADD Number of the slot in the BM
ATERCONPA subrack where one end of the
TH(Mandatory ATER connection channel is
BMSN BM Slot No BSC6900 ) located None
ADD
ATERCONPA Number of the BM subrack where
TH(Mandatory Whether
one end ofto the
useATER
the device IP
connection
BMSRN BM Subrack No BSC6900 ) address aslocated
channel is the local IP address. None
When this parameter is set to
Duration of the flow control
"YES", the device IP address is
Timer Length of SET protection timer enabled during the
used as the local IP address of the
BMTCFCTime BM-TC Flow BSCTMR(Opti flow control between the TCS and GBFD-
ADD PPP link. When this parameter is
rLen Control BSC6900 onal) the MPS/EPS subracks 111705
PPPLNK(Man set to "NO", the device IP address
datory) is not used as the local IP address GBFD-
ADD of the PPP link. In this case, you 118611
BORROWDE MPGRP(Man need to reconfigure the local IP GBFD-
VIP Borrow DevIP BSC6900 datory) address of the PPP link. 118622
SET
To Alarm Box BOXRPT(Man Whether to report the alarm to the MRFD-
BOXFLG Flag BSC6900 datory) alarm box 210304
Position of break point 1 in an RXU
SET chain. The number of break points
BTSBREAKP must not be greater than the
Position of Break OINT(Optional number of RXU boards in the RXU GBFD-
BP1 Point 1 BSC6900 ) chain. 111202
Position of break point 2 in an RXU
SET chain. The number of break points
BTSBREAKP must not be greater than the
Position of Break OINT(Optional number of RXU boards in the RXU GBFD-
BP2 Point 2 BSC6900 ) chain. 111202
to trigger BQ handover depends
on the uplink and downlink
transmit quality (measured by
using BER). If the uplink or
downlink BQ exceeds the BQ
handover threshold, emergency
BQ handover is triggered. The
possible causes of BER increase GBFD-
SET (or quality degradation) include too 110601
According to the P/N rule, if the
GCELLHOBA low signal power and channel GBFD-
conditions for emergency BQ
BQHOEN BQ HO Allowed BSC6900 SIC(Optional) interference. 510501
handover are met in P of N
measurement reports, the
ADD handover is triggered.
If ("downlink level of the neighbor
BQ HO Valid G2GNCELL(O This parameter specifies the GBFD-
cell after filtering" - "downlink level
BQLASTTIME Time BSC6900 ptional) number P. 510501
of the serving cell (after power
control compensation)") > ("Inter- GBFD-
ADD cell HO Hysteresis" - "BQ HO 110601
According to the P/N rule, if the
G2GNCELL(O Margin" + 64), the BQ handover to GBFD-
conditions for emergency BQ
BQMARGIN BQ HO Margin BSC6900 ptional) the neighbor cell is triggered. 510501
handover are met in P of N
measurement reports, the
SET
ADD handover is triggered.
BQ HO Watch FCSW(Manda
G2GNCELL(O This parameter specifies the GBFD-
BQSTATTIME Time BSC6900 tory)
ptional) number N. 510501
SET
FCCPUTHD(
STR
Mandatory)
BKP(Mandato Classes of boards classified MRFD-
SET
BRDCLASS Board Class BSC6900 ry) according to function modules 210301
FCMSGQTHD
(Mandatory)
SET
CPUTHD(Man Classes of boards classified MRFD-
BRDCLASS Board Class BSC6900 datory) according to function modules 210301
ADD
BRD(Mandato Classes of boards classified MRFD-
BRDCLASS Board Class BSC6900 ry) according to function modules 210301
STR
BTSLOG(Man GBFD-
BRDNO Board No. BSC6900 datory) Number of the board 111202
STR
BTSVSWRTS Number of the RF front-end board GBFD-
ADD The upper threshold of the total
BRDNO Board No. BSC6900 T(Optional) in the BTS 111202
BTSBRDCAP( receive bandwidth of all the TRXs
Mandatory) bound to the board, for example,
ADD when this value is 250, it means
Receive BTSRXUBRD the the total receive bandwidth GBFD-
BRDRXBW Bandwidth BSC6900 (Optional) should be no more than 25Mbits/s. 111202
LOD
The upper threshold of the total
BTS Board BTSSW(Mand GBFD-
ADD send bandwidth of all the TRXs
BRDSWTYPE Software Type BSC6900 atory) Software type of the BTS board 111202
BTSBRDCAP( bound to send pass of board, for
Mandatory) example, when this value is 150, it
ADD means the the total send
Forward BTSRXUBRD bandwidth should be no more than GBFD-
BRDTXBW Bandwidth BSC6900 (Optional) 15Mbits/s. 111202
SET
DPUBRDTYP MRFD-
BRDTYPE Board Type BSC6900 E(Mandatory) Type of the board 210301
ADD
BRD(Optional MRFD-
BRDTYPE Board Type BSC6900 ) Type of the board 210301
SET
ETHPORT(Ma
BRDTYPE Board type. BSC6900 ndatory) Board type None
ADD
PPPLNK(Man
BRDTYPE Board type BSC6900 datory) Board type None
ADD
MPGRP(Man
BRDTYPE Board type BSC6900 datory) Board type None
ADD
MPLNK(Mand
BRDTYPE Board type BSC6900 atory) Board type None
ADD
BTSBRDCAP( GBFD-
BrdType Board Type BSC6900 Mandatory) Type of the new RXU board. 111202
Type of the board. The type can be
TMU/DTMU, DTRU, DPTU, QTRU,
STR MRRU, GRRU, BTS3900B, MRFU,
BTSLOG(Man GRFU, BTS3900E, DRFU, DRRU, GBFD-
To avoid intermittent blinking, the
BRDTYPE Board Type BSC6900 datory) UBRI or UTRP. 111202
switchover cannot be performed
over a certain period of time when
SET the OML is disconnected. That
Ring II Wait Time BTSRINGATT period of time is specified as ring II GBFD-
BREAKTIME Before Switch BSC6900 R(Optional) wait time before switch. 117802
SET
BROADCAST Broadcast GCELLSBC(O Contents of a cell broadcast GBFD-
CONTENT Content BSC6900 ptional) message 113602
SET
BROADCAST Broadcast GCELLSBC(O Time interval for a cell broadcast GBFD-
Backup mode of the log. If
INTERVAL Interval BSC6900 ptional) message 113602
"ENTIRE" is selected, all logs in
the current database are backed GBFD-
BKP up. If "INCREMENTAL" is selected, 111203
LOGDB(Optio the logs generated after last MRFD-
BS Backup Style BSC6900 nal) backup are backed up. 210305
DPC of the external BSC, which is
BS-AG-BLKS-RES, indicating the
used for inter-BSC communication.
number of the CCCH message
This parameter can be
blocks reserved for the AGCH.
represented in decimal,
After the CCCHs are configured,
hexadecimal, and binary. By
SET the value of this parameter
default, this parameter is
CCCH Blocks GCELLIDLEB indicates actually the seizure rates
represented in decimal. To
BSAGBLKSR Reserved for ASIC(Optional of the AGCHs and the PCHs over GBFD-
represent this parameter in
ES AGCH BSC6900 ) the CCCHs. 111003
hexadecimal, precede this
parameter value with H'. To
ADD represent this parameter in binary,
External BSC EXTBSC(Man precede this parameter value with GBFD-
BSCDPC DPC BSC6900 datory) B'. 118602
ADD
ADJNODE(M Uniquely identifies a BSC in the GBFD-
ADD
BSCID BSC ID BSC6900 andatory) TC pool 118605
GEXT2GCEL
L(Optional)
ADD IP address of the BSC6900. If the
EXTBSC(Man connection
ID of the BSCmode
thatofcontrols
the BSC6900
the MRFD-
BSCIDX BSC Index BSC6900 datory) and the CBC
external is to leadcell
2G neighbor cables out 210301
of the PIU, the value of this
parameter must be the same as
ADD
the preset IP address of the PIU
BSCINCHPR BSC Fine Tuning AISSCFG(Opt Period for fine tuning the BTS GBFD-
port.
D Period BSC6900 ional) clock between BSCs 118201
If the connection mode is to lead
cables out of the XPU panel, the
ADD value of this parameter must be
ADD
GCBSADDR( the same as the preset IP address GBFD-
BTSAUTOPL
BSCIP BSC IP BSC6900 Mandatory) of the XPU panel. 113601
AN(Mandatory
)
SET
BTSIP(Option IP address of an interface board GBFD-
BSCIP BSC IP BSC6900 al) on the BSC6900 side 118601
BSC local switching is enabled
when the congestion rate of the
Ater interface exceeds the value of
"Ater Cong Thres for BSC
LocalSwitch".
PREFIXNUMBER: The function of
BSC local switching is enabled
when the leading digits of the
SET calling or called MSISDN are the
BscLsStartMo Options for BSC BSSLS(Optio preset value of "Prefix Number for GBFD-
de Local Switch BSC6900 nal) BSC (1-10)". 117701
ADD
External BSC EXTBSC(Man GBFD-
BSCNAME Name BSC6900 datory) Unique name of the external BSC 118621
Whether to allow high-priority calls
SET to preempt the radio resources of
Preemption OTHSOFTPA low-priority calls when radio GBFD-
BSCPMA Allowed BSC6900 RA(Optional) resources are insufficient. 115001
Whether to allow the eMLPP
Preemption Whether to be
priorities to allow the call into
classified during
twoan
Allowed During SET intra-BSC
types: high priority and normal the
handover to preempt
BSCPMAIRA Intra-BSC OTHSOFTPA radio resources of low-priority calls
priority. GBFD-
HO Handover BSC6900 RA(Optional) in the parameter
If this target cell. is set to NO, then 115001
ADD during the resource preemption,
BTSMONITO the priorities of all the services with
RTS(Mandato an eMLPP priority
In-BSC6900 port No.greater
of thethan 2 GBFD-
BSCPN In-BSC Port No. BSC6900 ry) are compared,
monitoring and the resources
timeslot 114701
are assigned to the services with a
higher priority.
ADD Port number used for the
If this parameter is set to YES,
GCBSADDR( communication between the GBFD-
then during the resource
BSCPORT BSC Port BSC6900 Mandatory) BSC6900 and the CBC 113801
preemption, all the services with
an eMLPP priority greater than 2
Two eMLPP SET are considered to have the same
BSCPRICLAS Priority Classes OTHSOFTPA priority, and the resources are GBFD-
S Allowed BSC6900 RA(Optional) assigned equally. 115001
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 1 that is MRFD-
EDPARA1 parameter 1 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 10 that is MRFD-
EDPARA10 parameter 10 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 11 that is MRFD-
EDPARA11 parameter 11 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 12 that is MRFD-
EDPARA12 parameter 12 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 13 that is MRFD-
EDPARA13 parameter 13 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 14 that is MRFD-
EDPARA14 parameter 14 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 15 that is MRFD-
EDPARA15 parameter 15 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 16 that is MRFD-
EDPARA16 parameter 16 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 17 that is MRFD-
EDPARA17 parameter 17 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 18 that is MRFD-
EDPARA18 parameter 18 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 19 that is MRFD-
EDPARA19 parameter 19 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 2 that is MRFD-
EDPARA2 parameter 2 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 3 that is MRFD-
EDPARA3 parameter 3 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 4 that is MRFD-
EDPARA4 parameter 4 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 5 that is MRFD-
EDPARA5 parameter 5 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 6 that is MRFD-
EDPARA6 parameter 6 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 7 that is MRFD-
EDPARA7 parameter 7 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved parameter 8 that is MRFD-
EDPARA8 parameter 8 BSC6900 RA(Optional) effective at the BSC level 210301
SET
BSCRESERV Reserved OTHSOFTPA Reserved
In-BSC6900 parameter 9 that
sub-timeslot is of
No. MRFD-
EDPARA9 parameter 9 BSC6900 RA(Optional) effective at the timeslot.
the monitoring BSC levelIf the 210301
ADD added monitoring timeslot works at
BTSMONITO 64 kbit/s, the sub-timeslots are
RTS(Mandato numbered
In-BSC6900 from
slot0.No.
If the added
of the GBFD-
BSCSN In-BSC Slot No. BSC6900 ry) monitoring timeslot works at 32 114701
kbit/s, the sub-timeslots are
ADD
numbered from 0 or 4. If the added
BTSMONITO
monitoring timeslot works at 16
In-BSC Subrack RTS(Mandato In-BSC6900 subrack No. of the GBFD-
kbit/s, the sub-timeslots are
BSCSRN No. BSC6900 ry) monitoring timeslot 114701
numbered from 0, 2, 4, or 6. If the
ADD added monitoring timeslot works at
BTSMONITO 8 kbit/s, the sub-timeslots are
In-BSC Sub RTS(Mandato numbered from any value among 0 GBFD-
BSCSUBTS Timeslot No. BSC6900 ry) to 7. 114701
ADD
ATERE1T1(M This
SET Whenparameter is used
the BTS clock to set the
is adjusted,
andatory) ID of the BSC at the otherfor
parameter end of
BSC Symbol BSCAISS(Ma the offset isBS_CV_MAX
added to obtain MS better GBFD-
ADD the link.
countdown. In non-TC pool scenario,
This parameter is used
BSCSYMOFF Offset BSC6900 ndatory) network performance. 118201
ATERSL(Man this parameter
for the specifiesthe
MS to calculate theCV.
ID of
datory) the
Thisprimary
parameterBSC. In TC
also pool
determines
ADD scenario,
the duration thisofparameter specifies
the timer T3198.
ID of BSC in TC SEMILINK(Ma the
When the MS sends one at
ID of the BSC that is the
uplink GBFD-
BSCTID Pool BSC6900 ndatory) other end of the link.
RLC data block, the receiving state 113726
of this data block is set to Pending
SET and the timer T3198 is started. If
ID of a BSC in BSCBASIC(M the
ID ofMSthereceives
BSC that thesupports
packet uplink
the TC GBFD-
BSCTID TC Pool BSC6900 andatory) acknowledge
pool function before the timer 113726
T3198 expires, the MS updates the
ADD
receiving state of each uplink RLC
BTSMONITO
data block according to the bit map
In-BSC Timeslot RTS(Mandato In-BSC6900 timeslot No. of the GBFD-
in the message. If the timer T3198
BSCTS No. BSC6900 ry) monitoring timeslot 114701
of the RLC data block in the
Pending state expires, the MS sets
SET the receiving state of this data
GCELLPSBA block to Nack and retransmits the GBFD-
BSCVMAX BS_CV_MAX BSC6900 SE(Optional) data bloc. 114101
average service performance of
the system lowers. Based on the
principle of ensuring that overload
does not occur to paging channels,
you must set this parameter to a
value as small as possible. You
must regularly measure the
overload conditions of the paging
SET channels
Whether to in enable
a runningthenetwork
BTS to and
BSMSPWRLE Transfer BTS/MS GCELLHOCT accordingly
transfer BTS/MSadjustpower
the value
classoftothis GBFD-
V Power Class BSC6900 RL(Optional) parameter
the BSC properly. A paging 110802
message in a location area must
be sent in all the cells within this
ADD Type of the
location areaBSS local
at the switching
same time.
BSPAGBLKS Number of GCELL(Optio with the cooperation of the MRFD-
Therefore, the capacity of aMSC.
paging
RES PAGCH Blocks BSC6900 nal) Number of PAGCH
NONSUPPORT: Whenblocks 210301
channel of each cell in aperforming
location
SET local switching,
area must be the the BSSorneed
same not
nearly
Multi-Frames in a GCELLIDLEB determine
the same. Thewhether the MSC
capacity refersallows
to
BSPAMFRAM Cycle on the ASIC(Optional an
theMS to be involved
calculated numberinoflocalpaging GBFD-
S Paging CH BSC6900 ) switching.
sub-channels of each cell. 110303
BASIC: Assignment request
messages and handover request
ADD messages sent by the MSC
BSPBCCHBL Number of GCELL(Optio contain a flag indicating whether to MRFD-
KS PBCCH Blocks BSC6900 nal) Number
allow an of
MSPBCCH
for localblocks
switching. 210301
The BSS must identify this flag
ADD when performing local switching.
BSPRACHBL Number of GCELL(Optio ENHANCED: Assignment request MRFD-
General strategy of the BSS local
KS PRACH Blocks BSC6900 nal) messages
Number of and PRACHhandover
blocksrequest 210301
switching, which includes the BSC
messages sent by the MSC
Whether to support
local switching the BTS
and the paginglocal GBFD-
contain a flag indicating whether to
BSS Local SET function
switching.ofThe
the CS
two domain
functions of the A 117701
allow an MS for local switching.
BssLsGenMo Switching BSSLS(Optio interface.
cannot beYes: the MS
enabled cansame
at the be GBFD-
The BSS must identify this flag
de General Strategy BSC6900 nal) called
time. upon paging request on the 117702
when performing local switching. In
A interface when the MS uses the
MSC- addition, when the BSS enables or GBFD-
GPRS; No: the MS cannot be
Collaborated ADD stops local switching, the BSS 117701
called upon paging request on the
BSSLSMSCC BSS Local GCNNODE(O sends a local switching enabled or GBFD-
A interface when the MS uses the
OOP Switching BSC6900 ptional) stopped message to the MSC. 117702
GPRS. This parameter is valid only
when the "A Interface Paging Co-
BSSPAGING SET ordination Switch" in "SET
COORDINATI BSS Paging Co- GCELLPSBA BSCPSSOFTPARA" is set to GBFD-
ON ordination BSC6900 SE(Optional) "Open". 119305
SET
CLK(Mandato MRFD-
BT Board type BSC6900 ry) Type of the board 210502
CON
PATCH(Mand MRFD-
LOD
BT Board type BSC6900 atory) Type of the board 210401
PATCH(Mand
atory)
LOD
BRD(Mandato MRFD-
SET
BT Board type BSC6900 ry) Type of the board 210401
E1T1LOP(Ma
ndatory)
SET
E1T1(Mandat
BT Board type BSC6900 ory) Board type None
LOP
E1T1(Mandat
BT Board type BSC6900 ory) Board type None
STR
E1T1TST(Ma
BT Board type BSC6900 ndatory) Board type None
SET
OPT(Mandato
BT Board type BSC6900 ry) Board type None
SET
COPTLNK(Ma
BT Board Type BSC6900 ndatory) Board
Type oftype
the board that controls the None
RET antenna.
ADD 1. DATU: It may represent the
IPLOGICPOR DATU or the DATM and is
BT Board Type BSC6900 T(Mandatory) applicable
Board typeto the BTS3012, None
BTS3012AE, BTS3012_II,
BTS3006C, and BTS3002E.
CHK
2. GATM: It is applicable to the
E1T1CRS(Ma
BTS3900 GSM, BTS3900A GSM,
BT Board type BSC6900 ndatory) Board type None
BTS3036, and BTS3036A.
3.
ADD RXU:DRRU,MRRU,MRFU,GRRU,
BTSRETANT( GRFU,BTS3900E support the RET MRFD-
BT Board Type BSC6900 Mandatory) antenna connect directly. 210602
ADD
BTSANTFEE
DERBRD(Ma Type of the newly added antenna GBFD-
BT Board Type BSC6900 ndatory) board 111202
ADD
BTSBRD(Man GBFD-
BT Board Type BSC6900 datory) Type of the newly added board 111202
ADD
BTSRXUBRD Type of the newly added RXU GBFD-
BT Board Type BSC6900 (Mandatory) board 111202
ADD
BTSTRXBRD( GBFD-
BT Board Type BSC6900 Mandatory) Type of the board 111202
SET
BTSANTFEE
DERCONNEC GBFD-
BT Board Type BSC6900 T(Mandatory) Type of the board 111202
(Mandatory)
STR
BTSLOG(Man
datory)
STR
BTSRACKTE
MPMON(Man
datory)
STR Identifies the BM subrack or TC
ADD
RETANTSCA subrack of the BSC.
BM/TC config ATERE1T1(M The configuration flag specifies the GBFD-
N(Mandatory) When this parameter is set to
BTCFLAG flag BSC6900 andatory) operation is on the BM or TC. 111801
STR "CFGBM", a BM signaling link is
TRANSPERF added.
This parameter specifies whether
ADD
TST(Mandator When this parameter is set to
to enable the TRX Working Voltage
BM/TC config ATERSL(Man
y) "GFGTC", a TC signaling link is GBFD-
Adjustment feature. When this
BTCFLAG flag BSC6900 datory)
SWP added. 111801
parameter is set to YES, the
BTSBRD(Man
SET BSC6900 supports the feature GBFD-
datory)
GCELLBASIC where the power amplifier can use 111202
SWP
PARA(Option different working voltages in GBFD-
BTSadjust Adjust Voltage BSC6900 BTSCLKCLTP
al) different TRX modulation modes. 111611
T(Mandatory)
SET
TST
BTSOMLDET
BTSBRD(Man
BTSBARCOD ECT(Mandato
datory) GBFD-
E BTS Bar Code BSC6900 ry)
SET Bard code of BTS BBU board. 111202
BTSENVALM(
BTS Mandatory)
SET BTS detection switch. If the
BTSCOMTYP Communication STR
BTSIP(Option parameter is set to "CLOSE", the GBFD-
E Type BSC6900 BTSVSWRTS
al) function of detecting
Communication type the
of aBTS
BTSis 118601
T(Mandatory) Peer equipment type of the BTS.
disabled. If the parameter is set to
SWP This parameter indicates whether
"OPEN", the function of detecting
BTSLOCGRP to connect the BTS to the
the BTS is enabled. When the
ADD
(Mandatory) BSC6900 or cascade the BTS to GBFD-
function of detecting the BTS is
BTSDESC BTS Description BSC6900 BTS(Optional)
SET another BTS. 111202
enabled, the BSC6900 performs
BTSLOADCT addressing according to the BTS
RL(Mandatory
SET IP address and sends the UDP
BTSDETECT BTS Detect )BTSOTHPAR packet carrying the VLANID to the GBFD-
SWITCH Switch BSC6900 CHG
A(Optional) BTS. 118601
BTSPTUSHK
BTS index of the adjacent node to
TM(Mandator
ADD be added. The parameter is valid
y)
ADJNODE(M only when Adjacent node type is GBFD-
PING
BTSID Site Index BSC6900 andatory) set to Abis. 118605
BTSCFM(Man
datory)
TRC
BTSCFM(Man Index of the BTS, uniquely GBFD-
BTSID BTS Index BSC6900 datory) identifying a BTS in a BSC6900. 111202
SET
BSCABISPRI
MAP(Mandato Index of the BTS running the GBFD-
BTSID BTS Index BSC6900 ry) command 111202
LOD
ADD
BTSSW(Mand
BTSABISHDL Number of the BTS connected to
atory)
BTSIDCONB Connect BSC CPATH(Mand the BSC. The number is unique in GBFD-
LOD
SC BTS Index BSC6900 atory) a BSC 118401
BTSPATCH(M
andatory)
CON List of BTS indexes. You can
BTSPATCH(M specify multiple BTSs by & and GBFD-
BTSIDLST BTS Index List BSC6900 andatory) &&. 111202
BTSRACKTE
MPMON(Man
datory)
STR
RETANTSCA
N(Mandatory)
STR
TRANSPERF
COL
TST(Mandator Whether to collect offset
SYNCINFO(M
y) information by BTS index or BTS GBFD-
BTSIDTYPE BTS Index Type BSC6900 andatory)
SWP name. 118201
BTSBRD(Man
SET
datory) Conditions for enabling the
BTSANTANG IP address
Index type of the
of a BTS. When "BTS
BTS.switching.
BYNAME:
SWP function of BTS local
LE(Mandatory Com
query Type"
by BTSis set to "LOGICIP",
name; BYID: query MRFD-
BTSCLKCLTP UNCONDITIONALSTART: The
BTSIDTYPE BTS Index Type BSC6900 ) the
by value
BTS of the parameter is the IP
index. 210602
T(Mandatory) function of BTS local switching is
address of the BTS. When "BTS
TST enabled without restriction.
Com Type" is set to "PORTIP", the
ADD
BTSBRD(Man ABISCONGESTS: The function of
ADD value of the parameter is the IP
BTSOP(Mand
datory) BTS
Baselocal switching
station is enabled
index, 65535 indicate MRFD-
BTSAUTOPL address of the BTS ethernet port.
BTSIDX Site Index Collect BSC6900 atory)
SET when thestations.
all base congestion rate of the 210305
AN(Mandatory When "BTS Com Type" is set to
BTSENVALM( Abis interface exceeds the value of
) "PPPLNK" or "MPGRP", the value
Mandatory) "Abis Cong Thres for BTS
SET of the parameter is the local IP
STR LocalSwitch".
BTSIP(Option address of the BTS PPP link or GBFD-
BTSVSWRTS PREFIXNUMBER: The function of
BTSIP BTS IP BSC6900 al) BTS MLPPP group. 118601
T(Mandatory) BTS local switching is enabled
SWP when the leading digits of the
SET
BTSLOCGRP calling or called MSISDN are the
BtsLsStartMo Options for BTS BSSLS(Optio
(Mandatory) preset value of "Prefix Number for GBFD-
de Local Switch BSC6900 nal)
SET BTS (1-10)". 117702
BTSLOADCT
ADD
RL(Mandatory
BTSAUTOPL
)AN(Mandatory GBFD-
BTSMASK Subnet Mask BSC6900 CHG
) Subnet mask of BTS. 118601
BTSPTUSHK
Whether to enable the BTS to
TM(Mandator
SET preprocess measurement reports.
y)
BTSMESRPT MR.Preprocessin GCELLHOCT This parameter determines where GBFD-
PING Name of the BTS, uniquely
PREPROC g BSC6900 RL(Optional)
to conduct power control. 110802
BTSCFM(Man identifying a BTS in a BSC6900.
datory) This parameter cannot contain , ; =
TRC " ' more than two (include two) %,
BTSCFM(Man more than two (include two) space, GBFD-
BTSNAME BTS Name BSC6900 datory) This
moreparameter
than threespecifies whether
(include three) +. 111202
LOD the BSC is allowed to shut down
ADD Connect
the BCCHBSC TRXBTS thatName.It is
is configured
BTSSW(Mand
BTSABISHDL unique in one BSC.This
as "Shut Down Enabled" to save parameter
atory)
BTSNAMECO Connect BSC CPATH(Mand cannot
power after containthe ?BSC
| : <receives
> " @ # !a% ^ GBFD-
LOD
NBSC BTS Name BSC6900 atory) & * . [ ] / \ \\ '.
power failure message from the 118401
BTSPATCH(M
andatory) BTS.
CON When this parameter is set to Yes,
BTSNAMELS BTSPATCH(M the
List BSC
of BTS shuts downYou
names. all the
canTRXs GBFD-
T BTS Name List BSC6900 andatory) that
specifyaremultiple
configuredBTSs as by
"Shut
&. Down 111202
Enabled", including the BCCH
If the parameter is set to "ON", all
TRX, after receiving a power
SET the Ping packets are sent
failure message from the BTS.
BTSPINGSWI BTSPINGSW( If the parameter is set to "OFF", all GBFD-
When this parameter is set to No,
TCH BTS Ping Switch BSC6900 Optional) the Ping packets are discarded. 118601
the BSC shuts down only the non-
SET BCCH TRXs that are configured as
BTSPOWER BTSLOCKBC "Shut Down Enabled" after
OFFLOCKBC BTS Power-off CH(Mandator receiving a power failure message GBFD-
CH Lock BCCH BSC6900 y) from the BTS. 111605
Transmission compression ratio of
a BTS. 1. Modifying the settings of
"Transfers Compress Rate" may
change the bandwidth required by
SET Maximum degree
the BTS. That by which
is, the currentthe
BTSPWRNU GCELLPWR2 BSC can control the
bandwidth may be excessivepower of or
the GBFD-
M BTS PC Class BSC6900 (Optional) BTS dynamically
insufficient. If the bandwidth is 110703
insufficient, more secondary
Whether to specify links
"Power Control
Switch for BTS SET should
thresholdbeAdjust
addedfor or SAIC"
timeslots
in the
BTSSAICPCA Supporting SAIC GCELLSOFT( should be rearranged.
MML command "SET 2. The GBFD-
DJSWITCH PC Adjust BSC6900 Optional) greater the "Transfers Compress
GCELLPWR3" 118103
Rate" is, the smaller the
compression rate is and the
LOD
greater the required bandwidth is.
BTS Software BTSSW(Mand Software version number of the GBFD-
3. The user can get the actual
BTSSWVER Version BSC6900 atory) BTS 111202
value through multiplying the value
of this parameter by 0.01. The
Transmission SET default value of this parameter is
BTSTRCMPR Compression BTSTRCMPR 100, which means no GBFD-
ADD
ATE Ratio BSC6900 (Mandatory) compression. 118401
BTS(Mandato
ry)
ADD
SET
BTSAUTOPL
BTSALM(Man GBFD-
AN(Mandatory
BTSTYPE BTS Type BSC6900 datory) Type of the BTS 111202
)
SET
BTSAUTOPL
ANCFG(Mand GBFD-
LOD
BTSTYPE BTS Type BSC6900 atory) Type of the BTS 510701
BTSPATCH(M
andatory)
CON
BTSPATCH(M GBFD-
BTSTYPE BTS Type BSC6900 andatory) Type of the BTS 111202
ADD
Time for Waiting BTSBFD(Opti Time for which the BTS waits to GBFD-
BTSWTR to Restore BSC6900 onal) restore a BFD session 118609
STR
BTSTST(Man GBFD-
Battery type.
BTTSTTYPE BT Test Type BSC6900 datory) Type of TRX loopback test 111207
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
BTSAPMUBP the corresponding parameter in GBFD-
If the OML is not established at
BTYPE Battery Type BSC6900 (Optional) another mode. 111202
one port after a period of time, the
OML switches to another port and
Ring II Try SET tries to connect to this port. That
Rotating Duration BTSRINGATT period of time is called ring II GBFD-
BUILDTIME Time BSC6900 R(Optional) rotating duration time. 117802
ADD
BUNDLINGFL SCTPLNK(Op Whether to enable the data GBFD-
AG Bundling Flag BSC6900 tional) binding function 118602
ADD
PTPBVC(Man
datory)
BLK
PTP BVC PTPBVC(Man Identifies a unique PTP BVC with GBFD-
BVCI Identifier BSC6900 datory) NSE 119001
ADD Switch
The BSSGPfor adjusting the dynamical
virtual connection
GCELLQUICK bandwidth
identifier. Itof
is the
usedlogical port. If this
to identify
PTPBVC SETUP(Optio switch
multipleisBVCs
turnedthaton,multiplexes
the system the GBFD-
BVCI Identifier BSC6900 nal) adjusts
NS-VC. the dynamical bandwidth of 119001
the logical port according to the
Duration of BVC flow control timer
transmission quality of the link
SET F. A cell sends the flow control
monitored by the IPPM. After this
BVC Flow BSSGPPARA( message at the interval specified GBFD-
switch is turned on, the IPPM
BVCTF Control Timer BSC6900 Optional) by this timer. 119001
function must be activated on the
IPPATH of this logical port. For
ADD details about the IPPM, see the
Auto adjust IPLOGICPOR description of the command "ACT GBFD-
If the available backward
BWADJ bandwidth switch BSC6900 T(Mandatory) IPPM". 118605
bandwidth is less than or equal to
Backward this value, the backward
congestion ADD congestion alarm is emitted and
BWDCONGB remain TRMLOADTH backward congestion control is GBFD-
W bandwidth BSC6900 (Optional) striggered. 118605
If the available backward
Backward bandwidth is greater than this
congestion clear ADD value, the backward congestion
BWDCONGC remain TRMLOADTH alarm is cleared and backward GBFD-
LRBW bandwidth BSC6900 (Optional) congestion control is stopped. 118605
If the ratio of available backward
bandwidth is greater than this
Backward ADD value, the backward congestion
BWDCONGC congestion clear TRMLOADTH alarm is cleared and backward GBFD-
If the ratio of available backward
LRTH remain ratio BSC6900 (Optional) congestion control is stopped. 118605
bandwidth is less than or equal to
this value, the backward
Backward ADD congestion alarm is emitted and
BWDCONGT congestion TRMLOADTH backward congestion control is GBFD-
If the available backward
H remain ratio BSC6900 (Optional) triggered. 118605
Backward bandwidth is greater than this
overload value, the backward overload
congestion clear ADD congestion alarm is cleared and
BWDOVLDCL remain TRMLOADTH backward overload control is GBFD-
If the ratio of available backward
RRSVBW bandwidth BSC6900 (Optional) stopped. 118605
bandwidth is greater than this
Backward value, the backward overload
overload ADD congestion alarm is cleared and
BWDOVLDCL congestion clear TRMLOADTH backward overload control is GBFD-
If the available backward
RTH remain ratio BSC6900 (Optional) stopped. 118605
Backward bandwidth is less than or equal to
overload this value, the backward overload
congestion ADD congestion alarm is emitted and
BWDOVLDR remain TRMLOADTH backward overload control is GBFD-
If the ratio of available backward
SVBW bandwidth BSC6900 (Optional) triggerd. 118605
bandwidth is less than or equal to
Backward this value, the backward overload
overload ADD congestion alarm is emitted and
congestion TRMLOADTH backward overload control is GBFD-
BWDOVLDTH remain ratio BSC6900 (Optional) triggered. 118605
Backward ADD
BWDRESVH handover TRMLOADTH Ratio of reserved backward GBFD-
OTH reserved ratio BSC6900 (Optional) bandwidth for handover user 118605
Backward
handover ADD
BWDRSVHO reserved TRMLOADTH Reserved backward bandwidth for GBFD-
BW bandwidth BSC6900 (Optional) handover user 118605
ADD
BWMAXRATI Max bandwidth IPLOGICPOR Maximum ratio of the estimated GBFD-
O estimate ratio [%] BSC6900 T(Optional) bottleneck bandwidth 118605
ADD
CABINETDES Cabinet BTSCABINET Descriptive information of the BTS GBFD-
C Description BSC6900 (Optional) cabinet 111202
SET
BTSRACKBC( List of all the cabinet numbers in GBFD-
CABLST Cabinet List BSC6900 Mandatory) the BTS 111202
ADD
CAB(Mandato Whether the added cabinet is a MRFD-
CABT Is remote cabinet BSC6900 ry) remote cabinet 210301
Whether to allow call re-
establishment. Burst interference
or blind spots due to high buildings
may lead to a radio link failure. If a
SET call drop is caused by such a
Call GCELLBASIC failure, the MS can start call re-
CALLRESTA Reestablishment PARA(Option establishment to resume the GBFD-
BDIS Forbidden BSC6900 al) Whether an MS uses the
conversation. 110503
calculated value as the final
receive level value. The calculated
SET
receive level value is the
BTSCLKPAR GBFD-
measured receive level value
CALVAL Calibration Value BSC6900 A(Mandatory) Calibration value of the clock 111202
minus the receive level value
obtained from the BCCH TRX
SET timeslots. This parameter is a cell
GCELLCCCH option in system messages 3 and GBFD-
CANPC PWRC BSC6900 (Optional) 6. 113701
Whether to enable the capacity
SET and coverage of the BTS to be
Capacity and BTSAUTOPL automatically optimized according
CAPCOVERO Coverage ANCFG(Optio to the actual situation of the GBFD-
PTSWITCH Optimize Switch BSC6900 nal) incumbent network. 510702
ADD
CARDFREAT Card Frequency BTSBRD(Opti GBFD-
TR Attribute BSC6900 onal) Card Frequency Attribute 111202
Whether to indicate that the IP
Path is carried on the IP logic port
ADD or resource group. NULL indicate
IPPATH(Optio the
UsedIPtogether
Path is carried on the
with "Cell Bar GBFD-
CARRYFLAG Carry Flag BSC6900 nal) physics
Qualify" port.
to decide the priority 118605
status of a cell. Refer to GSM Rec.
ADD 04.08.
The bearing type IPLOGICPOR Cell Bar Qualify Cell Bar Access GBFD-
CARRYT of the logic port BSC6900 T(Optional) Cell selection
Bearer type ofpriority Cellport
the logical 118605
reselection priority
NO NO Normal
STR
Normal
IPCHK(Option
NO YES
CARRYT Carry port type BSC6900 al) Port type of the SBFD/ARP bearer None
Prohibited Prohibited
SET YES NO Low GBFD-
GCELLIDLEB Normal 110401
ASIC(Optional YES YES Low GBFD-
CBA Cell Bar Access BSC6900 ) Normal 110402
CBC interface parameter. The
ADD value of this parameter must be
GCBSADDR( translated into a binary
Uniquely identifying numeral.
a cell GBFD-
CBCINDEX CBC INDEX BSC6900 Mandatory) The following
broadcast describe
center (CBC)each bit of 113601
the value:
Bit 0: phase flag
ADD
Bit 1: message type flag
GCBSADDR( GBFD-
Bit 2: cell list flag
CBCIP CBC IP BSC6900 Mandatory) IP address of a CBC 113601
Bit 3: whether to carry a recovery
indication
ADD Bit 4: whether to carry a cell ID
GCBSADDR( Bit 5: whether to carry a recovery GBFD-
CBCITFPARA CBC ITF Para BSC6900 Optional) indication during resetting 113601
Used together with "Cell Bar
Access" to decide the priority
status of a cell. See GSM Rec.
0408. This parameter does not
Duration of no cell broadcast
affect cell reselection but cell
message at the Cb interface. If the
ADD selection only.
BSC6900 does not receive any
GCBSADDR( Cell
Port Bar Qualify
number Cell
at the CBCBarside
Access
in the GBFD-
message from the CBC during the
CBCPORT CBC Port BSC6900 Mandatory) Cell selection priority
communication Cell
with the BSC6900 113601
preset value of this parameter, the
reselection priority
BSC6900 considers that the
NO NO Normal
Cb No Message SET connection with the CBC has been
Normal
CbNonMsgTi Disconnection BSCTMR(Opti broken and reestablishes a GBFD-
NO YES
mer Timer BSC6900 onal) connection. 113601
Prohibited Prohibited
SET YES NO Low
GCELLIDLEB Normal
ASIC(Optional YES YES Low GBFD-
CBQ Cell Bar Qualify BSC6900 ) Normal 110401
SET
BSCBASIC(O Country code, for example, 86 for MRFD-
Whether to enable the certificate
CC CC BSC6900 ptional) China 210301
chain
DISABLE: indicating that the
Certificate Chain SET certificate chain is disabled
CCAEnableSt File Enabled CERTFILE(Op ENABLE: indicating that the MRFD-
a State BSC6900 tional) certificate chain is enabled 210305
Time interval for sending overload
Used for the BTS to notify the
messages, used for the BTS to
BSC6900 of the load over a
SET notify the BSC6900 of the load
specific CCCH timeslot, that is, the
CCCHLOADI CCCH Load GCELLCCCH over a specific CCCH timeslot. GBFD-
load of the access request
NDPRD Indication Period BSC6900 (Optional) See GSM Rec. 0508. 111003
messages over the RACHs and all
the messages (including paging
SET and packet immediate assignment
CCCHLOADT CCCH Load GCELLCCCH messages) over the PCHs. See GBFD-
HRES Threshold BSC6900 (Optional) GSM Rec. 0858. 111003
SET
BSCPSTCDS
DSCP of CPMAP(Optio DSCP corresponding to the GBFD-
CCDSCP CONV[QoS] BSC6900 nal) session service 118603
Offset of the measurement report
Threshold of forbidding directed
about the cells at the 1800 MHz
retry for cells. When the value of
frequency. Before cells are
Threshold
"Assignment of the
Cellmeasurement
Load Judge
sequenced by priority according to
report
Enable" about
in "SET the cells at the 1800
GCELLCCBASIC"
ADD frequencies, the value of this
MHz frequency.
is ENABLE, When
if cells support the receive
CCMINTERV ETHMA(Optio parameter
Transmission must be added
period of theto the
CCM GBFD-
level
directedvalue in the
retry andmeasurement
the current cell
AL CCM Send Prid BSC6900 nal) receive
packet level
in the value
MA in the 118630
report
load isabout
greater thethan
cellsoratequalthe 1800
to the
measurement report about the
MHz
valuefrequency exceedsthe
of this parameter, theBSC
value
cells at the 1800 MHz frequency.
Cell Directed SET of this parameter,
allocates a channel the toreport
an MStakes
The values of this parameter
CDRTTRYFB Retry Forbidden GCELLOTHE effect.
throughAfter the being
process filtered, the
of directed GBFD-
correspond to the following decibel
DTHRES Threshold BSC6900 XT(Optional) measurement
retry. report is used for 110607
values:
priority sequencing of cells.
SET 0: 0 dB GBFD-
The values of this parameter
GCELLCCUT 1: 6 dB 114301
correspond to the following decibel
CELL1800OF 1800 Reporting RANSYS(Opti ... GBFD-
values:
F Offset BSC6900 onal) 7: 42 dB 114302
0: 0 dB
SET 1: 6 dB GBFD-
BCCH frequency of a 2G neighbor
GCELLCCUT ... 114301
cell that MSs can measure in idle
CELL1800TH 1800 Reporting RANSYS(Opti 6: 36 dB GBFD-
mode. Recording the BCCH
RED Threshold BSC6900 onal) 7: positive infinity 114302
frequencies of 2G neighbor cells
Whether to generate the 2G BA1
that MSs can measure in idle
table automatically according to
SET mode, the BA1 table is sent in
neighbor cell relations or to input
CELL2GBA1B 2G NCELL GCELL2GBA System Information 2, 2bis, and MRFD-
the 2G BA1 table manually.
CCH BCCH BSC6900 1(Mandatory) 2ter. 210301
Recording the BCCH frequencies
of 2G neighbor cells that MSs can
BCCH frequency of a 2G neighbor
SET measure in idle mode, the BA1
cell that MSs can measure in
CELL2GBA1T GCELL2GBA table is sent in System Information MRFD-
dedicated mode. Recording the
AG 2GBA1 Input Tag BSC6900 1(Mandatory) This parameter
2, 2bis, and 2ter.indicate whether to 210301
BCCH
Offset frequencies
applied theofreceive
to BA2 2G neighbor
generate the 2G table level
SET cells
of a that MSscell
GSM900 caninmeasure
the in
automatically according to
GCELLHO2G dedicated
measurement mode, the BA2
report before table is
neighbor cell relations or to input
CELL2GBA2B 2G NCELL BA2(Mandator sent in System
prioritizing Information 5, 5bis, MRFD-
the 2G BA2cells table bymanually.
frequency
CCH BCCH BSC6900 y) and
bands.5ter.Before cells are sequenced 210301
Recording the BCCH frequencies
Timeslot power attenuation level of
SET by
of 2Gpriority,
neighboraccording
cells that to MSs can
the EDGE TRX in 8PSK. The
GCELLHO2G frequencies,
measure in dedicated the value mode, of this the
attenuation level ranges from 0 to
CELL2GBA2T BA2(Mandator parameter
BA2 table must
is sent bein added
System to the MRFD-
Threshold
50, each ofofwhich the measurement
corresponds to
AG 2GBA2 Input Tag BSC6900 y) receive
Information level5,value5bis, inand the5ter. 210301
report of the cells
an attenuation at the
of 0.2 dB.900 MHz
measurement report of the cells at
SET frequency.
When the EDGE The measurement
TRX sends
the 900 MHz frequency.
Cell 8PSK Power GCELLBASIC report
signalsisinvalid8PSK, onlythewhen the
transmit
The values of this parameter
CELL8PSKP Attenuation PARA(Option receive
power must levelbe in lower
the measurement
than the GBFD-
correspond to the following decibel
OWERLEVEL Grade BSC6900 al) report
mean powerof the GSM900
in GMSK.cell exceeds 119115
values:
this threshold. After being filtered,
SET 0: 0 dB GBFD-
the measurement report is used for
GCELLCCUT 1: 6 dB 114301
prioritizing the cells. The value 7
900 Reporting RANSYS(Opti ... GBFD-
means infinite:
CELL900OFF Offset BSC6900 onal) 7: 42 dB 114302
0: 0 dB
SET 1: 6 dB GBFD-
Whether the cell can be added to
GCELLCCUT ... 114301
the reselected candidate cell list. If
CELL900THR 900 Reporting RANSYS(Opti 6: 36 dB GBFD-
this parameter is set to "NoPermit",
ED Threshold BSC6900 onal) 7: positive infinity 114302
the cell cannot be reselected as
SET the candidate cell for handover. If
GCELLSERV this parameter is set to "Permit",
CELLBARAC Cell Access Bar PARA(Option the cell can be reselected as the GBFD-
CESS2 Switch BSC6900 al) candidate cell for handover. 114101
andatory) If the coverage type of a cell is
SET outdoor coverage, the BTS detects
GCELLSERV whether the standing wave alarm
PARA(Mandat is generated only when the forward
ory) power is greater than 35 dBm.
SET If the coverage type of a cell is
GCELLSTAN indoor coverage, the BTS detects
DARDOPTPA whether the standing wave radio
SET
RA(Mandatory alarm is generated only when the
CELLCOVER Cell Coverage GCELLOTHE
) forward power is greater than 30 GBFD-
AGETYPE Type BSC6900 XT(Optional)
SET dBm. 111202
GCELLGPRS( Even charging voltage of the
Even charging voltage of the
Mandatory) battery. The battery is charged at
SET battery. The battery is charged at
ADD the voltage as specified by this
CELLEQUCH Even Charging BTSPMUBP( the voltage as specified by this GBFD-
BTSOBJALM parameter.
GVOL Voltage BSC6900 Optional) parameter. 111202
SHLD(Mandat In multi-mode scenario, the value
ory) of this parameter in one mode
SET
ADD must be the same as the value of
CELLEQUCH Even Charging BTSDPMUBP
GCELLQUICK the corresponding parameter in GBFD-
GVOL Voltage BSC6900 (Optional)
SETUP(Mand another mode. 111202
Float charging voltage of the
atory) Float charging voltage of the
battery. The battery is charged at
SET battery. The battery is charged at
the voltage as specified by this
CELLFLOATC Float Charging GCELLFREQ
BTSPMUBP( the voltage as specified by this GBFD-
parameter.
HGVOL Voltage BSC6900 SCAN(Mandat
Optional) parameter. 111202
In multi-mode scenario, the value
ory)
of this parameter in one mode
SET
SET must be the same as the value of
BTSANTANG
CELLFLOATC Float Charging BTSDPMUBP the corresponding parameter in GBFD-
LE(Mandatory
HGVOL Voltage BSC6900 (Optional) another mode. 111202
)
STR
TRXBURSTT
ST(Mandatory Index of a cell, uniquely identifying MRFD-
CELLID Cell Index BSC6900 ) a cell in a BSC6900 210301
ADD
BTSRETANT( Index of a cell, uniquely identifying MRFD-
CELLID Cell Index BSC6900 Mandatory) a cell in a BSC6900 210301
ADD
BTSAUTOPL Index of the cell. It uniquely MRFD-
CELLID Cell Index BSC6900 AN(Optional) identifies a cell. 210301
SAV
GCELLTEMP
List of the user-defined neighbor
LATE(Mandat GBFD-
cells to be measured. This
CELLID Cell Index BSC6900 ory) Cell Index 111202
parameter is represented as a
character string where the IDs of
STR the cells to be measured are
NCS(Mandato separated by &, such as 1&2&5. GBFD-
CELLIDLST Cell List BSC6900 ry) The BSC supports up to 50 cells. 510901
SET
GCELLNC2P
ARA(Mandato
ry)
SET
GCELLNCRE
SELECTPAR
A(Mandatory)
SET
SET
GCELLNWCT
FHO(Mandato Index type of a cell when this MRFD-
CELLIDTYPE Cell Index Type BSC6900 RLMSRPARA(
ry) command is executed 210301
Mandatory)
SET
ADD
GCELLRESE
BTSRETANT(
LECTPARA(M MRFD-
CELLIDTYPE Cell Index Type BSC6900 Mandatory)
andatory) Index type of the cell 210301
SET
SET
GCELLSERV
BTSANTANG Index type of the cell. BYNAME:
PARA(Mandat
LE(Mandatory query by cell name; BYID: query MRFD-
CELLIDTYPE Cell Index Type BSC6900 ory)
) by cell index. 210602
SET
GCELLSTAN This parameter specifies whether a
ADD
DARDOPTPA cell is the OL subcell or the UL
Cell Inner/Extra GCELL(Mand
RA(Mandatory subcell. This parameter is applied GBFD-
CELLINEXTP Property BSC6900 atory)
) to the enhanced dualband cell. 114402
SET Whether an assignment
Layer of the complete
cell. If the layer of the GBFD-
GCELLGPRS(
ADD message contains
cell is lower, a cell
it is more list.that a
likely 110601
Mandatory)
GEXT3GCEL According
handover to tothe
GSM cellRec. 08.08,
will be GBFD-
CELLLAYER Layer of the cell BSC6900 ADD
L(Optional) during a channel assignment, an
triggered. 510501
BTSRETANT( assignment complete message
Mandatory) List of cell indexes. All cell indexes
contains a cell list only when the
ADD
ADD are combined as a character
cell of the MS changes.
GSMSCB(Opt
GCELLQUICK string, separated by "&". For MRFD-
For the MSCs of some vendors,
CELLLIST Cell Index List BSC6900 ional) Maximum number of SDCCHs in
example, 1&2&5. 210301
SETUP(Mand however, assignment complete
the cell. Before converting a TCH
atory) messages must contain cell lists.
into an SDCCH, the BSC
SET To meet such a requirement, the
compares the number of SDCCHs
CellListOption Cell List Send GCELLFREQ
MSGSOFTPA value of this parameter must be GBFD-
after the conversion in the cell with
Send Flag in ASS CMP BSC6900 SCAN(Mandat
RA(Optional) YES. 111804
"Cell SDCCH Channel Maximum".
ory)
SET If the number of SDCCHs after the
SET
Cell SDCCH GCELLCHMG conversion in the cell exceeds this
BTSANTANG
Channel BASIC(Option parameter, the BSC does not GBFD-
LE(Mandatory
CELLMAXSD Maximum BSC6900 al) convert the TCH into an SDCCH. 113001
)
STR
TRXBURSTT
ST(Mandatory Name of a cell, uniquely identifying MRFD-
CELLNAME Cell Name BSC6900 ) a cell in a BSC6900 210301
SET
ADD
GCELLHOINT
BTSAUTOPL
ERRATLDB(M Name of a cell, uniquely identifying MRFD-
AN(Mandatory
CELLNAME Cell Name BSC6900 andatory) a cell in a BSC 211402
)
SAV
List of cell names. All cell names
GCELLTEMP
are combined as a character
LATE(Mandat GBFD-
string, separated by "&". For
CELLNAME Cell Name BSC6900 ory) Name of a cell. 111202
example, cell1&cell2&cell5. The
cell name should not contain the
ADD following characters:
CELLNAMELI GSMSCB(Opt MRFD-
ST Cell Name List BSC6900 ional) ? | : < > " @ # ! % ^ & * . [ ] / \ \\ ' 210301
Threshold of the downlink receive
level of an over-coverage cell. If
the downlink level of a cell is
SET
higher than the value of this
CELLOPPWR Cell Operator GCELLCHMG Power of each passage on the GBFD-
parameter and the timing advance
GRP Power Group BSC6900 AD(Optional) MRRU in the cell 118701
(TA) is greater than the value of
Threshold of the TA of an over-
"Cell Over Coverage TA Threshold" GBFD-
coverage cell. If the downlink level
CELLOVERC Cell Over SET in more than 20% measurement 110801
of a cell is higher than the value of
VGRXLEVDL Coverage DL GCELLOTHE reports, the cell is defined as an GBFD-
this parameter and the timing
TH RxLev Threshold BSC6900 XT(Optional) Maximum
over-coverage number
cell.of reported 110802
advance (TA) is greater than the
paging overload messages in the
value of "Cell Over Coverage TA GBFD-
cell. If the BSC allows the flow
Cell Over SET Threshold" in more than 20% 110801
control on the re-paging
CELLOVERC Coverage TA GCELLOTHE measurement reports, the cell is GBFD-
messages, and the number of the
VGTALTH Threshold BSC6900 XT(Optional) defined as an over-coverage cell. 110802
reported paging overload
messages exceeds the value of
CELLPAGING Cell Paging SET this parameter, the BSC
Whether to allow the power-off of
OVERLOADC Overload GCELLSOFT( determines that the cell is in PCH GBFD-
the battery.
OUNTER Threshold BSC6900 Optional) overload state. 111003
In multi-mode scenario, the value
of
The this parameter
number in one
of times thatmode
the
SET must
downlink transmissionthe
be the same as valueofof
quality
CELLPWROF Battery Power-off BTSDPMUBP the
the corresponding
MS power-off
is lower than parameter
the in GBFD-
Battery voltage.
FEN Allowed State BSC6900 (Optional) another
transmissionmode. 111202
In multi-modequality threshold
scenario, of
the value
the MSparameter
of this ("EDGE GMSK in oneQuality
mode
SET Threshold",
must be the "EDGEsame as8PSK Quality
the value of
CELLPWROF Battery Power-off BTSDPMUBP Threshold", or "GPRS
the corresponding parameter inQuality GBFD-
FVOL Voltage BSC6900 (Optional) Threshold"
another mode. by TBF type) is 111202
calculated accumulatively. When
This parameter specifies whether a
the rate of the accumulated value
2G/3G Cell SET 2G cell or 3G cell is selected in the
to the number of received
CELLRESEL Reselection GCELLNC2P inter-RAT cell reselection GBFD-
measurement reports on the
STRATEGY Strategy BSC6900 ARA(Optional) procedure. 116201
downlink transmission quality
(Packet Downlink Ack/Nack
CELLRXQUA Cell Rx Quality SET message) is greater than or equal
LWORSENRA Worsen Ratio GCELLNC2P to the value of this parameter, the GBFD-
TIOTHRSH Threshold BSC6900 ARA(Optional) emergency reselection is triggered. 116201
Information about the cell scenario.
SET It needs to be sent to the BTS. GBFD-
GCELLBASIC Based on the information, the BTS 510803
CELLSCENA PARA(Option optimizes the allocation of GBFD-
This parameter specifies whether
RIO Cell Scenario BSC6900 al) resources. 510804
to allow a mobile phone to
The BTS reports an alarm if the
preferentially camp on a 3G cell
temperature of battery group 1
CELLSELECT Select 3G Cell SET after a call is terminated in the
exceeds the value of this
AFTERCALL After Call GCELLCCAD( areas covered by both the GSM GBFD-
parameter.
REL Release BSC6900 Optional) network and the UMTS network. 114325
In multi-mode scenario, the value
The BTS reports an alarm if the
of this parameter in one mode
temperature of battery group 1 is
High Temp Alarm SET must be the same as the value of
lower than the value of this
CELLTEMP1 Assembled BTSDPMUBP the corresponding parameter in MRFD-
parameter.
ALARMH Battery1 BSC6900 (Optional) another mode. 210304
In multi-mode scenario, the value
of this parameter in one mode
Low Temp Alarm SET must be the same as the value of
CELLTEMP1 Assembled BTSDPMUBP the corresponding parameter in MRFD-
ALARML Battery1 BSC6900 (Optional) another mode. 210304
Upper limit of the temperature
measured by the temperature
sensor of the battery group 1. If
SET the measured value is greater than
BTSFMUABP( the value of this parameter, the
Lower limit of the temperature
SET
Mandatory) value of this parameter is reported.
measured by the temperature
BTSAPMUBP
SET In multi-mode scenario, the value
sensor of the battery group 1. If
(Optional)
BTSNFCBBP( of this parameter in one mode
the measured value is smaller than
Upper SET
Mandatory) must be the same as the value of
the value of this parameter, the
CELLTEMP1T Assembled BTSDPMUBP
SET the corresponding parameter in GBFD-
SET value of this parameter is reported.
HRESHOLDH Battery 1 Temp BSC6900 (Optional)
BTSPMUBP( another mode. 111202
BTSAPMUBP In multi-mode scenario, the value
Mandatory) Whether to allow the configuration
Lower (Optional) of this parameter in one mode
SET of parameters related to the
Assembled SET must be the same as the value of
BTSAPMUBP temperature compensation of the
CELLTEMP1T Battery1 TEMP BTSDPMUBP the corresponding parameter in GBFD-
SET
(Mandatory) battery group
HRESHOLDL Measure BSC6900 (Optional) Threshold
another mode. of the downlink receive 111202
Battery BTSAPMUBP
SET In multi-mode scenario, the value
level of an weak-coverage cell. If
Temperature (Optional)
BTSDATUBP( of this parameter in one mode
the downlink level of a cell is lower
CELLTEMPC Compensated SET
Mandatory) must be the same as the value of
than the value of this parameter
OMPENABLE Configure BTSDPMUBP
SET the corresponding parameter in GBFD-
and the timing advance (TA) is
D Enabled BSC6900 (Optional)
BTSDEMUBP another mode. 111202
smaller than the value of "Cell
(Mandatory) Threshold of the TA of an weak-
Threshold
Weak Coverage for stopping LAPD link
TA Threshold" in GBFD-
SET coverage cell. If the downlink level
CELLWEAKC Cell Weak SET congestion
more than 30% control. This parameter
measurement 110801
BTSDHEUBP( of a cell is lower than the value of
VGRXLEVDL Coverage DL GCELLOTHE cannot
reports,be theset too
cell is small.
defined If as
thisan GBFD-
Mandatory) this parameter and the timing
TH RxLev Threshold BSC6900 XT(Optional) parameter
weak-coverage is setcell.
too small, the 110802
SET advance (TA) is smaller than the
congestion control duration is too
BTSDOMUBP value of "Cell Weak Coverage TA GBFD-
long, and thus the transmission
Cell Weak SET
(Mandatory) Threshold" in more than 30% 110801
capability of signaling links cannot
CELLWEAKC Coverage TA GCELLOTHE
SET measurement reports, the cell is GBFD-
be fully used. The difference
VGTALTH Threshold BSC6900 XT(Optional)
BTSDPMUBP defined
Whetheras to an weak-coverage cell. 110802
between theallow the configuration
congestion start and
(Mandatory) of
endalarm parameters.
thresholds cannotThe be value
too
SET "YES"
small. Ifindicates that the
the difference is too small,
Congestion End BTSDTMUBP
GTRXFC(Opti configuration
congestion controlis allowed,
may be and the
started GBFD-
CENDTHD Threshold BSC6900 (Mandatory)
onal) value "NO"on
frequently indicates
signaling that the
links. 111705
SET configuration is not allowed. If the
BTSPSUFP(M parameter is set to "YES", all the
SET
andatory) other parameters are reset to the
Certificate Chain CERTFILE(M MRFD-
SET default values in this command.
CertChain File Name BSC6900 andatory) Name of the certificate chain file 210305
BTSDDPUBP( In multi-mode scenario, the value
Mandatory) of this parameter in one mode
Board Parameter SET must be the same as the value of
Configuration BTSUSCUBP( the corresponding parameter in GBFD-
CFGFLAG Enabled BSC6900 Mandatory) BTS configuration
another mode. modes include 111202
auto plan mode and normal mode.
In auto plan mode, the user can
SET Indicates whether the IP path is
enable the auto planning
BTSIP(Option carried on the IP logic port or the GBFD-
algorithms and auto optimization
CFGFLAG Carry Flag BSC6900 al) resource group. 118605
algorithms according to the BTS
SET type. In normal mode, the auto
BTS BTSAUTOPL planning algorithms and auto
Configuration ANCFG(Mand optimization algorithms are GBFD-
Whether to enable the board
CFGMODE Mode BSC6900 atory) disabled. 510701
parameters to be configured. If this
parameter is set to "YES", the user
Board Parameter SET can set board parameters of the
Configuration BTSCABPAR BTS cabinet. Otherwise, the user GBFD-
Whether to enable the board
CFLAG Enabled BSC6900 A(Mandatory) cannot set the board parameters. 111202
parameters to be configured. If this
SET parameter is set to "YES", the user
Board Parameter BTSPOWERT can set the cabinet power type.
Configuration YPE(Mandato Otherwise, the user cannot set the GBFD-
CFLAG Enabled BSC6900 ry) cabinet power type. 111202
GBFD-
ADD Confirm password. The confirm 111203
Confirm OP(Mandator password is required to ensure MRFD-
ADD
CFM Password BSC6900 y) that a correct password is entered. 210305
CCG(Mandato
ry) GBFD-
SET 111203
CCGN(Manda Customized command group to be MRFD-
CG Command Group BSC6900 tory) processed 210305
GBFD-
This parameter is valid only when 111203
ADD the operator belongs to the custom MRFD-
ADD Congestion end threshold. If the
CG Command Group BSC6900 OP(Optional) level. 210305
ATERSL(Opti congestion end threshold is large,
onal) the congestion control ends earlier.
ADD As a result, the congestion control
Congestion end threshold. If the
Congestion End ATERCONSL( effect is poor. The work of the Ater GBFD-
congestion end threshold is large,
CGET Threshold BSC6900 Optional) signaling link is deteriorated. 111203
the congestion control ends earlier.
As a result, the congestion control
ADD effect is poor. The work status of
If the parameter is set to 1, it
Congestion End PBSL(Optiona the Ater signaling link is GBFD-
indicates that the CGI and RAC
CGET Threshold BSC6900 l) deteriorated. 111203
data is generated through
SET automatic planning. If the
BTSAUTOPL parameter is set to 0, it indicates
CGIRACSWIT CGI and RAC ANCFG(Optio that the data needs to be manually GBFD-
CH Plan Switch BSC6900 nal) entered. 510701
GBFD-
SET Congestion start threshold. If 111203
Command Group CCGN(Option congestion
Name of thestart threshold
command is set
group. to
You MRFD-
CGN Name BSC6900 al) a large
can value,
define thethere
name. will be a time 210305
lag in the congestion control and,
the work of the signaling link gets
SET Congestion start threshold. If
deteriorated. The interval between
Cabinet Group BTSIDLETS( congestion
Number of the startcabinet
threshold
group is set to GBFD-
congestion start threshold and
CGN No. BSC6900 Mandatory) a largethe
where value,
idle there willisbelocated.
timeslot a time 114101
congestion end threshold should
lag in the congestion control and,
not be too small. Otherwise, the
the work of the signaling link gets
ADD Congestion start threshold.
work of the signaling link is If
deteriorated. The interval between
Congestion Start ATERSL(Opti congestion
unstable. The start thresholdcontrol
congestion is set to GBFD-
congestion start threshold and
CGST Threshold BSC6900 onal) a largestart
would value, there will be a time
frequently. 111203
congestion end threshold should
lag in the congestion control and,
not be too small. Otherwise, the
the work of the signaling link gets
ADD work of the signaling link is
deteriorated. The interval between
Congestion Start ATERCONSL( unstable. The congestion control GBFD-
congestion start threshold and
CGST Threshold BSC6900 Optional) would start frequently. 111203
congestion end threshold should
not be too small. Otherwise, the
ADD work of the signaling link is
Congestion Start PBSL(Optiona unstable. The congestion control GBFD-
This parameter indicates the
CGST Threshold BSC6900 l) would start frequently. 111203
geographical location relation
between the neighboring cell and
ADD the serving cell. In the BSC6900, if
CHAINNCELL Chain Neighbour G2GNCELL(O direction A is selected, then the GBFD-
TYPE Cell Type BSC6900 ptional) reverse direction is B. 510103
priority: quality factors, capacity
factors, PS cooperation factors,
and management factors.
If this parameter is set to
PSRELATIVELY, the factors are
Combination type of chains.
listed as follows in a descending
"CHAINTORING" indicates that
order of priority: capacity factors,
This parameter
one chain changes specifies the and
to a ring,
PS cooperation factors, quality
CBN proportion
"COMBINECHAINS" of availableindicatesPDCHs that in a
factors, and management factors.
CHAINTORIN BTSRXUCHAI cell
two (for
chains faultyarechannels,
combinedonly intotheone GBFD-
If this parameter is set to
G Combine Type BSC6900 N(Mandatory) PDCHs
ring. that are blocked due to 111202
PSABSOLUTELY, the factors are
Abis timeslot failure are
SET listed as follows in a descending
considered). When the proportion
GCELLCHMG order of priority: PS cooperation
of available PDCHs in the cell is
CHALLOCST Channel Allocate BASIC(Option factors, capacity factors, quality GBFD-
lower than this threshold, the BSC
RATEGY Strategy BSC6900 al) factors, and management factors. 111005
generates an alarm. When the
This parameter determines
proportion of available PDCHs in
whether to activate the function of
PDCH Available SET This parameter
the cell is higherspecifies
than or equalthe to
monitoring the failure of logical
CHANFAULT Threshold of GCELLSOFT( proportion
this threshold, of available
the BSCTCHs generatesin a
channels in a cell. When this
ALMPDCHTH Channel Failure BSC6900 Optional) cell (for faulty
a recovery channels, only the
alarm. None
function is activated and the
TCHs that are blocked due to Abis
proportion of faulty logical
timeslot failure are considered).
Monitoring Alarm SET channels in the cell exceeds a
When the proportion of available
CHANFAULT Switch for GCELLSOFT( predefined threshold, the BSC GBFD-
TCHs in the cell is lower than this
ALMSWITCH Channel Failure BSC6900 Optional) generates an alarm. 111203
threshold, the BSC generates an
alarm. When the proportion of
TCH Available SET available TCHs in the cell is higher
CHANFAULT Threshold of GCELLSOFT( than
Alarmormode equaloftothe this threshold, the GBFD-
SET Channel number ofANT_A a simple tributary
cell
ALMTCHTH Channel Failure BSC6900 Optional) Whether
BSC
of an toboard.
generates
RXU measure a the are
recovery
There channel
alarm.
three 111203
GCELLSBC(O When
broadcastthe value
message. of this parameter
This is a key
interference
alarm during channel1 has
ptional) is YES,modes.
parameter if the Alarm
addingmode
forassignment request
a simple cell
assignment.
only one type Ifof
this parameter is set
ADD message
broadcast sent byalarms.
message. the You
MSC The
can alarm
use
to NO, the
current isthe BSCand
fixed does not measure
GSMSCB(Ma contains
"DSP GSMSCB" channel to greater
rate type
query than
and GBFD-
the
the channel
normal interference
working current.or send
CHANID Chan ID BSC6900 ndatory) indicating
obtain the thevalue support
of this ofparameter.
both full 113602
an interference
Alarm mode 2 has indication during
and half rates, and two types
contains of
the
channel
alarms: assignment.
warning alarms If this
and critical
speech version indicating the
SET parameter
alarms. isalarm
set tocurrent
YES, the BSC
selectionThe of full rate speechis fixed
CHANINTER Active CH Interf. GCELLCHMG measures
and greater the channel interference GBFD-
version only than
or half therate
normal
speech
MESALLOW Meas.Allowed BSC6900 AD(Optional) during
working channel
current. assignment. 111005
version only, the BSC decodes the
Alarm
channel mode rate 3typehasinto twothetypes of
selection
This
alarms:parameter
warning isalarms
used to andcheck
critical
Channel Rate SET of full rate only or half rate only
whether
alarms. the Abis
The warning timeslot
alarmforcurrent
the
CHANNELRA Type Decode AITFOTHPAR when decoding the assignment GBFD-
PDCH
is is
periodical faulty. When the
pulse current, while out-of-
TECODE Expand BSC6900 A(Optional) request message. 111804
synchronization
the critical alarmperiod currentofisthe fixed.
PDCH
When primary
the parameter link exceedsis set to the1,
PDCH Out-of- SET value of this parameter,
"ANT_A ALD Current Minor Alarm the Abis
CHANPDOUT Synchronization GCELLSOFT( Whether
timeslot to the
for enable PDCH the isBSC to
Occur Th", "ANT_A ALD regarded
Current
TIME Period BSC6900 Optional) check
as automatically whether a
faulty. None
Minor Alarm Clear Th", "A ALD
BTS is connected a proper E1 port
Cur-Minor Alarm Over-Cur
in the EIUa. If a BTS is connected
ADD Duration",
Number of and ping"A ALD timeouts.
check Cur-Minor
to an E1 port configured for
CHECKCOU Ping Check IPPATH(Optio Alarm N-Cur Duration"
The parameter indicates cannot
the be GBFD-
another BTS in the EIUa, the BTS
NT Timeout Counts BSC6900 nal) configured.
number of timeout When the parameter
record failures.is 118605
cannot be reset automatically after
set to 2, "A ALD Cur-Minor Alarm
the BTS is initialized. Thus, the
Over-Cur Duration", and "A ALD
Auto Check of SET data configurations on the BTS
Cur-Minor Alarm N-Cur Duration"
CheckingBTS BTS Connection OTHSOFTPA side differ from the data MRFD-
cannot be configured. When the
Connection Port BSC6900 RA(Optional) configurations on the BSC side. 210206
parameter is set to 3, "ANT_A ALD
Current Minor Alarm Occur Th",
ANT_A ALD SET and "ANT_A ALD Current Minor
Current BTSRXUBP( Alarm Clear Th" cannot be GBFD-
ChkModA Detection Mode BSC6900 Optional) configured. 111202
Alarm N-Cur Duration" cannot be
configured. When the parameter is
set to 2, "B ALD Cur-Minor Alarm
Over-Cur Duration", and "B ALD
Cur-Minor Alarm N-Cur Duration"
cannot be configured. When the
parameter is set to 3, "ANT_B ALD
Current Minor Alarm Occur Th",
ANT_B ALD SET and "ANT_B ALD Current Minor
Current BTSRXUBP( Alarm Clear Th" cannot be GBFD-
ChkModB Detection Mode BSC6900 Optional) configured. 111202
ADD
IPPATHBIND( GBFD-
CHKN Check Index BSC6900 Mandatory) Detection index 118609
Calculate ADD
checksum when SCTPLNK(Op Whether to perform checksum GBFD-
CHKSUMRX receive message BSC6900 tional) when receiving message 118602
Calculate ADD
checksum when SCTPLNK(Op Whether to perform checksum GBFD-
CHKSUMTX send message BSC6900 tional) when sending message 118602
Checksum arithmetic type.
According to the RFC4960, the
ADD ALDER32 algorithm is not
CHKSUMTYP Checksum SCTPLNK(Op applicable to the SCTP checksum. GBFD-
E arithmetic BSC6900 tional) The CRC32 is recommended. 118602
STR
BTSTST(Man GBFD-
CHLDURATH Duration Hour BSC6900 datory) Duration 111207
SET
BTSCHNFALL
BACK(Mandat MRFD-
CHNNO Channel No. BSC6900 ory) Number of the channel in the TRX 210301
SET
TCPLYVOICE GBFD-
CHNNO Channel No. BSC6900 (Mandatory) Timeslot for playing sound 111203
y)
SET
GTRXCHAN(
Mandatory)
SET
GTRXCHANA
DMSTAT(Man
datory)
STR
BTSTST(Man MRFD-
CHNO Channel No. BSC6900 datory) Number of the channel in the TRX 210301
STR
Channel type of the timeslot on the
CHNTSTTYP Channel Test BTSTST(Man GBFD-
TRX. The channel type of timeslot
E Type BSC6900 datory) Type of channel loopback test 111207
0 must not be set, because the
SET combined BCCH is configured by
BTSCHNFALL default. The channel type of other
BACK(Mandat timeslots can be set to full-rate MRFD-
CHNTYPE Channel Type BSC6900 ory) TCH or half-rate TCH. 210301
ADD
Bandwidth IPLOGICPOR GBFD-
CIR [64kbps] BSC6900 T(Optional) Bandwidth of the logical port 118605
This parameter specifies the
estimated carrier-to-interference
SET ratio of a new call. It is used for the
CIRESTVALU C/I Estimate GCELLCHMG Huawei power control algorithm III GBFD-
E Value BSC6900 AD(Optional) to calculate the power of the call. 111005
ADD
DXXCONNEC Slot number of the BSC6900 board GBFD-
CIUSLOTNO Slot No. BSC6900 T(Mandatory) Clock
that is mode of the BTS.
connecteds to the BTS 111202
If this parameter is set to
INT_CLK, the BTS does not track
ADD any external clock. The internal
CIUSUBRAC DXXCONNEC Subrack number
high precision clockof the BSC6900
works in free- GBFD-
KNO Subrack No. BSC6900 T(Mandatory) run
board that is connected to the DXX
mode. 111202
If this parameter is set to
SET TRCBSC_CLK,
Whether the cellthe BTS tracks
supports the MS the
CLASS11DT Support Class11 clock signals received
GCELLGPRS( with the DTM multi-timeslot from the GBFD-
Whether
BSC. to enable the BSC to
M DTM BSC6900 Optional) capability of class 11 119403
include
If the 3G classmark
this parameter is set to EXCLK,
information
the BTS tracks element in thesignals
the clock
Classmark SET Classmark Request message
received from the external input that
CLASSMARK Enquiry With 3G OTHSOFTPA the BSC
clock. forwards from the MSC to GBFD-
QUERY Request BSC6900 RA(Optional) an MS
If this parameter is set to IP_TIME, 110501
the BTS shakes hands through the GBFD-
ADD IP network with the IP clock server 118611
Error clear MPGRP(Optio for synchronization. GBFD-
CLEARTHD threshold BSC6900 nal) If this clear
Error parameter is set to
threshold. 118622
IP_TRANSFER, the BTS extracts
the clock from an E1 when there is
SET not an IP clock after the BTS
BTSCLKPAR upgrades the transmission mode GBFD-
CLKMOD Clock Mode BSC6900 A(Mandatory) Clock
from E1 mode
transmission to IP 111202
transmission.
SET If this parameter is set to
CLKPRTTYP Clock Protocol BTSIPCLKPA TRCGPS_CLK,
Type of the clockthe BTS extracts
protocol for the GBFD-
E Type BSC6900 RA(Optional) the clockserver
IP clock through the DGPS from 111202
the GPS.
If this parameter is set to UM_CLK,
SET
the BTS keeps pace with the
CLKTYPE(Ma
signals broadcast on the downlink
CLKTYPE Clock board type BSC6900 ndatory) Type of the clock board None
main BCCH of a neighboring BTS.
If this parameter is set to
SET PEER_CLK, the multimode
BTSCLK(Man BTS(GSM) keeps pace with the MRFD-
ClkType Clock Type BSC6900 datory) signals that the other mode offer. 210501
(Optional)
SET
BTSDHEUBP(
Optional)
SET
BTSUSCUBP(
Optional)
SET Delay for which the BTS waits to
SET
BTSCABPAR run the burglar alarm clearance
Clear Command BTSTHEFTAL
A(Mandatory) command after reporting the GBFD-
EXP
ClrDelay Delay Time BSC6900 M(Optional)
SET burglar alarm 111202
ALMLOG(Opti
BTSPOWERT
onal) Whether the alarm to be queried is
YPE(Mandato
STA cleared. You can select "cleared"
Alarm Cleared ry)
ALMLOG(Opti or "uncleared", or both of them. By MRFD-
CLRFLG Flag BSC6900 SET
onal) default, both of them are selected. 210304
BTSRXUBP(
Optional)
LOD
SET
ADD Interval at which the BTS runs the
Clear Command RETANTCFG(
BTSTHEFTAL burglar alarm clearance command GBFD-
BTSRXU2LO
Optional)
ClrInterval Time Interval BSC6900 M(Optional)
CGRP(Manda automatically 111202
SET
tory)
BTSANTANG GBFD-
ADD
EXP
LE(Optional) Name of the command to be 111203
BTSBINDLOC
LOG(Optional
SET queried. You can select one or MRFD-
CMD Command Name BSC6900 GRP(Mandato
)BTSCLKPAR more commands. 210305
ADD
ry)
A(Optional) GBFD-
BTSSFPMOD
ADD
SET
ADD 111203
E(Optional)
BTSBRD(Opti
BTSCAVFRQ(
CCG(Mandato You can select one or more MRFD-
SET
onal)
CMD Command Name BSC6900 Optional)
ry) commands. 210305
BTSFORBIDT
ADD
SET
S(Optional)
BTSCABINET
BTSPMUDEF
SET
(Mandatory)
ADD Sequence number of the
(Optional)
Command BTSOMLTS(O
ADD
SUBCMD(Ma command string of the scheduled GBFD-
SET
CMDSEQ Sequence BSC6900 ptional)
BTSRXUBRD
ndatory) subtask. 111203
BTSTMA(Opti
SET
(Optional)
onal)
BTSETHPOR
SET
SET
ADD
T(Optional)
BTSENVALM
RETANTENB(
CAB(Mandato MRFD-
ADD
PORT(Option
CN Cabinet No. BSC6900 Optional)
ry) Number of the cabinet 210301
BTSPPPLNK(
al)
STR
Optional)
ADD
BTSBATTTST
ADD
BTSOBJALM
(Optional)
BTSMPLNK(
SHLD(Mandat GBFD-
STR
ADD
CN Cabinet No. BSC6900 Optional)
ory) Number of the cabinet 111202
RETANTSCA
BTSBFD(Opti
ADD
N(Optional)
onal)
BTSETHMA(
STR
ADD
Optional)
TRANSPERF
BTSIPRTBIN GBFD-
ADD
CN Cabinet No. BSC6900 TST(Optional)
D(Optional) Number of the cabinet 118609
BTSETHLCM
SWP
EP(Optional)
BTSBRD(Opti
ADD
onal)
BTSTOPCON Number of the cabinet where the GBFD-
SET
CN Port Cabinet No. BSC6900 FIG(Optional) port is located 111202
BTSENVALM(
Optional)
Time delay of the detection on
CHG
core network interface failure.
BTSPTUSHK GBFD-
Within the preset value of this
CN Cabinet No. BSC6900 TM(Optional)
Number of the cabinet 111202
parameter, the BSC6900
continuously detects core network
SET interface failures and then releases
CNFAULTDEL GBSCREDGR the management right of service GBFD-
AY CN Fault Delay BSC6900 P(Optional) objects. 113725
ADD
NRIMSCMAP(
Mandatory)
ADD
SET
NSE(Mandato
MSGSOFTPA
ADD
ry)
RA(Mandatory
GCNNODE(M GBFD-
ADD
CNID MSC ID BSC6900 )andatory) Used to uniquely identify an MSC 117401
SGSNNODE(
SET
Mandatory)
AITFOTHPAR
ADD
A(Mandatory)
NRISGSNMA Identifies a node of SGSN with the GBFD-
SET
CNID SGSN Node ID BSC6900 P(Mandatory) operator name uniquely 119701
BSCAITFTMR
(Mandatory)
ADD Index of an MSC. It is used in
GCNNODE(M storing and querying the MSC GBFD-
CNNODEIDX CN Node Index BSC6900 andatory) attributes 117401
Policy of the BSC6900 for judging
whether the interface status of the
CMP
core network is normal. If the value
CNOPERATO LICENSE(Opti MRFD-
is NONE, the BSC6900 does not
RINDEX Operator Index BSC6900 onal) Index of the operator 210403
change the service management
right. If the value is AINTFBLOCK,
CNSTATEPO SET the BSC6900 releases the service
LICYFORGR CN State Policy GBSCREDGR management right when detecting GBFD-
OUP For Group BSC6900 P(Optional) disconnection at the A interface. 113725
SET
BTSDPMUBP Type of the BTS cabinet where the GBFD-
CNT Cabinet Type BSC6900 (Mandatory) DMPU is installed 111202
Assume that this threshold is not 0.
GBFD-
When the accumulated number of
SET 111203
alarm blink times exceeds the
LOGLIMIT(Op Maximum number of records MRFD-
threshold, the alarm is reported.
CNTL Counts Limit BSC6900 tional) allowed in the operation log 210305
For querying the alarm blink
Assume that this threshold is not 0.
measurement period, see "LST
When the number of alarm blink
Upper count SET ALMBLKSW". For setting the
times is smaller than the threshold,
CNTRISTHR threshold of ALMBLKPAR alarm blink measurement period, MRFD-
the alarm is reported. For querying
D raised fault BSC6900 A(Optional) see "SET ALMBLKSW". 210304
the alarm blink measurement
period, see "LST ALMBLKSW". For
Lower count SET setting the alarm blink
CNTSTLTHR threshold of ALMBLKPAR measurement period, see "SET MRFD-
D raised fault BSC6900 A(Optional) ALMBLKSW". 210304
GBFD-
SET Whether to adjust the candidate 110601
COBSCMSC GCELLHOBA cell queue to give priority to intra- GBFD-
ADJEN Co-BSC/MSC Adj BSC6900 SIC(Optional) BSC/MSC handover 510501
Number of a simple cell broadcast
message. You can run "DSP
GSMSCB" to query and obtain the
information.
The value of this parameter cannot
be 0.
ADD This parameter, "Geography
Whether to start the refrigeration
GSMSCB(Ma Scope", and "Update" uniquely GBFD-
equipment of the BTS.
CODE Code BSC6900 ndatory) decide a cell broadcast message. 113602
In multi-mode scenario, the value
of this parameter in this mode
SET must be the same as the value of
Refrigeration BTSOUTPUT( the corresponding parameter in GBFD-
COLDSET Equipment BSC6900 Optional) another mode. 111202
COL
SYNCINFO(M Whether to collect offset GBFD-
COLTYPE Collection Type BSC6900 andatory) information by the BTS or cell. 118201
SET
GCELLPWRB Combined loss used to estimate
COMBINERL ASIC(Optional the downlink power during GBFD-
OSS Combiner Loss BSC6900 ) assignment 117602
Level of common access control,
SET used for load control, allowing or
Common Access GCELLCCBA forbidding the access of some GBFD-
COMMACC Control Class BSC6900 SIC(Optional) users of common access levels 111003
SET
Password PWDPOLICY( MRFD-
Complicacy Complexity BSC6900 Optional) Complexity of the password 210305
ADD
Connect power SUBRACK(O Whether to connect the power MRFD-
CONNPWR monitoring board BSC6900 ptional) monitoring board 210301
Type of the connection between
Minimum
the NE and interval
EMS orbetween the two
LMT. The GBFD-
SET consecutive
connection can handover decisions of
be a plain 111203
CONNTYPE( an MS. Theor
connection BSC
SSLcannot make a
encryption MRFD-
CONNTYPE Connection Type BSC6900 Mandatory) handover
connection. decision during the 210305
minimum interval.
Whether the Iur-g common
To avoid frequent handover events
ADD connection is established between
in the cell, the BSC starts a timer
GIURGCONN the BSC and a co-BSC6900 RNC MRFD-
after delivering a handover
CONNTYPE Connection Type BSC6900 (Mandatory) or an external RNC. 211402
command to an MS. The BSC
allows the MS to make a second GBFD-
SET handover decision only after the 110601
CONTHOMIN Min Interval for GCELLHOCT timer expires. This parameter GBFD-
INTV Consecutive Hos BSC6900 RL(Optional) specifies the duration of the timer. 510501
The twice intra-cell handover GBFD-
Interval for SET events during this interval are 110601
Whether to perform the PING
Consecutive HO GCELLHOAD considered consecutive handover GBFD-
operation continuously. When the
CONTINTV Jud. BSC6900 (Optional) events. 510501
continuous PING operation is
performed, the system sends the
PING packets to the specified IP
Continue ping or PING address. You can stop the PING
PING
CONTPING not BSC6900 IP(Optional) operation by using CTRL + Q. None
MAC(Optional
)
PING
BTSCFM(Opti
Count Send PKT Count BSC6900 onal) Transmitted packets None
This parameter specifies whether
SET to allow the BSC6900 to enable or
Allow Dynamic GTRXDEV(O disable the power amplifier of a GBFD-
CPS Shutdown TRX BSC6900 ptional) TRX based on the traffic volume. 111602
ADD
GCBSADDR( MRFD-
CPUN CPU NO BSC6900 Mandatory) CPU number on a board 210301
Cell reselection hysteresis. This is
one of the parameters used for
SET
deciding whether to reselect cells
CRC4 Check BTSCRC4(Ma Whether to enable to the BTS to GBFD-
in different location areas. This
CRC4CHK Switch BSC6900 ndatory) support CRC4 check 111202
parameter can avoid the increase
SET of network signaling traffic due to
Cell Reselect GCELLIDLEB frequent location update and
Hysteresis ASIC(Optional reduce the risk of losing paging GBFD-
CRH Parameters BSC6900 ) messages. 110402
Certificate SET
Whether to enable the certificate
Revocation List CERTFILE(M Name of the certificate revocation MRFD-
revocation list
CRL File Name BSC6900 andatory) list file 210305
DISABLE: indicating that the
certificate revocation list is
Certificate SET disabled
CRLEnableSt Revocation List CERTFILE(Op ENABLE: indicating that the MRFD-
a File State BSC6900 tional) certificate revocation list is enabled 210305
Proper setting of this parameter
can reduce the number of
handover times, helpful for
assigning an MS to a better cell. In
a special case that the PT is 31,
the larger the CRO value is, the
lower the possibility of handing
The
over field
an MS indicates
to the cell.whether the GBFD-
SET cross-connect
Generally,
Time intervaldo for path
not setisBTS
the available.
the CRO to a 510301
Threshold of the time for crosstalk
CRMSGRES Channel Release GCELLGSMR When
value
resendingthe cross-path
larger a than
channel 25 dB.is available,
The CROa
release GBFD-
detection. Within the threshold, if
ENDINT Resend Interval BSC6900 (Optional) maximum
with
message of fourvalue
a too large IP paths exists.
will cause 510302
the call flag continuously
The
uncertain states in a network.path
four IP paths are the IP The
appearing in the code stream is GBFD-
between
CRO values the offirst
thelocal
cellsIPwith
address
SET different
Number from
of times the one saved
BTS in a
and the first
different peer of
priorities IP the
in aaddress,
networkthe are
510301
CRMSGRES Channel Release GCELLGSMR transcoder
resending a(TC) or a BTS,
channel release the TC GBFD-
IP path the
almost between
same.the Referfirsttolocal
GSM IP
ENDNUM Resend Number BSC6900 (Optional) or the BTS considers that a
message 510302
address
Rec. 05.08 andand theGSMsecond Rec.peer IP
04.08.
crosstalk occurs and sends a
SET address,
The setting of this parameter the
the IP path between
message to the BSC6900. Upon
GCELLIDLEB second localthe
affects only IP MSs
address and the
supporting
receiving such a message, the
Cell Reselect ASIC(Optional first peer IP address,
the protocol of GSM Phase and the 2 IP
or a GBFD-
BSC6900 host board records in a
CRO Offset BSC6900 ) path between the second local IP
later version. 110402
log the information about the
address and the second peer IP
current call, including the
address. When the cross-path is
SET information about the Abis
unavailable, a maximum of two IP
CROCALTMT Cross Call Detect BSCBASIC(O interface, Ater interface, BTS, cell, GBFD-
paths exists. The two IP paths are
HRD Time Threshold BSC6900 ptional) TRX, channel, and TC. 111203
the IP path between the first local
IP address and the first peer IP
ADD address and the IP path between
CROSSIPFLA Cross IP address SCTPLNK(Op the second local IP address and GBFD-
G available flag BSC6900 tional) the second peer IP address. 118602
ADD
TRMMAP(Opt GBFD-
CSDATAPATH CS data path BSC6900 ional) CS data path 118605
ADD
TRMMAP(Opt GBFD-
CSDATAPRI CS data priority BSC6900 ional) CS data priority 118605
ADD
TRMMAP(Opt GBFD-
CSVOICEPRI CS voice priority BSC6900 ional) CS voice priority 118605
ADD
Format of the control acknowledge
Control BSC AISSCFG(Ma GBFD-
message of the MS. Four access
CTRBSCDPC DPC BSC6900 ndatory) DPC of the control BSC 118201
bursts are used to obtain timing
advance without sending polling
Control SET message; RLC/MAC control block
CTRLACKTY Acknowledge GCELLPSBA is used to obtain timing advance GBFD-
PE Type BSC6900 SE(Optional) after sending polling message. 114101
SET
BTSLOADCT
RL(Mandatory GBFD-
CTRLFLAG Control Flag BSC6900 ) Control Flag 111202
ADD
ControlPort No. of RET antenna.
CTRLPORTC Control Port BTSRETANT( Number of the cabinet which MRFD-
The number of RET antenna which
N Cabinet No. BSC6900 Mandatory) controls RET antenna. 210602
connect to same feed tributary
cannot more than 6.For GATM
ADD boards, the valid value ranges
CTRLPORTN BTSRETANT( from 0 to 5. For RXU boards, the MRFD-
Number of the slot where the
O Control Port No. BSC6900 Mandatory) valid value ranges from 0 to 2. 210602
board controlling the RET antenna
is located. For SingleRAN BTSs,
ADD the valid value ranges from 0 to 5.
CTRLPORTS Control Port Slot BTSRETANT( For non-SingleRAN BTSs, the MRFD-
N No. BSC6900 Mandatory) valid value ranges from 0 to 23. 210602
ADD
CTRLPORTS Control Port BTSRETANT( Number of the subrack where the MRFD-
RN Subrack No. BSC6900 Mandatory) BTS board is located 210602
SET
CurChannelIn HO_RQD MSGSOFTPA Whether an HO_RQD message GBFD-
HoRqd Current Channel BSC6900 RA(Optional) Number
contains of
themeasurement reports
Current Channel 111804
sampled for averaging the signal
SET
quality on a speech/data channel.
BTSAUTODL
Averaging the signal quality in
DACTINFO(M C-version number of the BTS GBFD-
multiple measurement reports
CVer C-Version No. BSC6900 andatory) Number
software of measurement reports 111202
helps to avoid a sharp signal
sampled for averaging the signal
quality drop due to Rayleigh fading GBFD-
strength on a speech/data
SET and to ensure the 110601
channel. Averaging the signal
DATAQUAFLT Filter Length for GCELLHOFIT comprehensiveness of a handover GBFD-
strength in multiple measurement
LEN TCH Qual BSC6900 PEN(Optional) decision. 510501
reports helps to avoid a sharp
signal level drop due to Rayleigh GBFD-
SET fading and to ensure the 110601
DATASTRFLT Filter Length for GCELLHOFIT comprehensiveness of a handover GBFD-
LEN TCH Level BSC6900 PEN(Optional) decision. 510501
Data service supported by the
SET BSC6900. You can set this
DATATRAFFS Data Service GCELLOTHE parameter according to actual GBFD-
ET Allowed BSC6900 XT(Optional) requirements. 110204
GBFD-
111203
ADD Whether to limit the operation date MRFD-
DATE Date Limit BSC6900 OP(Optional) of the operator 210305
SET
TIME(Optional GBFD-
DATE Date BSC6900 ) Date 111203
Prohib ADD Unique number of the date range
DynShutdown BSCDSTPAD during which to disable the BSC
DateRangeIn TRX ATE(Mandator from shutting down the TRX GBFD-
dex DateRangeIdx BSC6900 y) dynamically 111602
SET
BTSAUTODL
DACTINFO(M Date when the TMU board GBFD-
Day Day BSC6900 andatory) software is released 111202
Temperature error allowed when
the temperature control system
adjusts the temperature.
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
BTSDHEUBP( the corresponding parameter in GBFD-
DBD Dead Band BSC6900 Optional) another mode. 111202
Whether the primary BCCH is
BCCH IUO of ADD configured on the inner or extra
DBFREQBCC Double GCELL(Mand part of an intelligent underlay- GBFD-
HIUO Frequency Cell BSC6900 atory) overlay (IUO) cell 114501
ADD
DBLFREQAD Same Group Cell GCELL(Mand Index of a same group cell in an GBFD-
JCID Index BSC6900 atory) enhanced dual band network 114402
ADD
DBLFREQAD Same Group Cell GCELL(Mand Name of a same group cell in an GBFD-
JCNAME Name BSC6900 atory) enhanced dual band network 114402
ADD
DBLFREQAD Same Group Cell GCELL(Mand Index type of a same group cell in GBFD-
JIDTYPE Index Type BSC6900 atory) an enhanced dual band network 114402
SET
DC Low Voltage BTSALMPOR GBFD-
DCLAPN Alarm Port No. BSC6900 T(Mandatory) DC Lowvoltage Alarm Port No. 111202
SET
DC Low Voltage BTSALMPOR DC voltage alarm lower threshold. GBFD-
DCLASN Alarm Slot No. BSC6900 T(Mandatory) When the busbar
DC Lowvoltage output
Alarm voltage
Slot No. is 111202
lower than the value of this
parameter, an alarm indicating the
DC Low Voltage SET
abnormal busbar voltage is
Alarm Subrack BTSALMPOR GBFD-
reported.
DCLASRN No. BSC6900 T(Mandatory) DC Lowvoltage Alarm Subrack No. 111202
In multi-mode scenario, the value
of this parameter in one mode
The BTS reports an alarm if the
SET must be the same as the value of
DC voltage exceeds the value of
DC Voltage BTSAPMUBP the corresponding parameter in GBFD-
this parameter.
DCVLTHD Lower Threshold BSC6900 (Optional) another mode. 111202
In multi-mode scenario, the value
of this parameter in one mode
The BTS reports an alarm if the
SET must be the same as the value of
DC voltage is lower than the value
DCVOLALAR DC Overvoltage BTSDPMUBP the corresponding parameter in MRFD-
of this parameter.
MH Alarm Threshold BSC6900 (Optional) another mode. 210304
In multi-mode scenario, the value
of this parameter in one mode
DC Under SET must be the same as the value of
DCVOLALAR Voltage Alarm BTSDPMUBP the corresponding parameter in MRFD-
ML Threshold BSC6900 (Optional) another mode. 210304
DC voltage alarm upper threshold.
This parameter specifies the
When the busbar output voltage is
default pre-converted PDCHs in
higher than the value of this
the dynamic transferable channel
parameter, an alarm indicating the
pool.
abnormal busbar voltage is
When this parameter is greater
reported.
than 0, three sub-links are bound
In multi-mode scenario, the value
to the static PDCH and pre-
Timer
of this for delayingina one
parameter connection
mode
converted PDCH in a cell by
SET release.
must be This parameter
the same as theisvalue
usedoffor
default.
DC Voltage BTSAPMUBP delaying the channel
the corresponding deactivation
parameter in GBFD-
The pre-converted PDCH can be
DCVUTHD Upper Threshold BSC6900 (Optional) after themode.
another active signaling link is 111202
preempted when it is idle. You can
broken. The purpose is to reserve
Number of set "Number of Reserved Dynamic
some time for the disconnection
DefaultDynPd Dynamic SET Channel" as required when you
that may be repeated. After
chPreTranNu Channel Pre- GCELLPSCH expect the pre-converted PDCH GBFD-
receiving a REL IND message sent
m Converted BSC6900 M(Optional) not to be preempted. 113101
by the BTS, the BSC6900 starts
ADD
the timer. When the timer expires,
M3DE(Mandat
SET the BSC6900 stops the timer and
ory)
DELAYSEND GCELLTMR(O sends the BTS an RF CHAN REL GBFD-
ADD
RFCHREL T3111 BSC6900 ptional) message. 111004
M3RT(Mandat
ory)
ADD The destination entity number
Destination entity M3LKS(Mand uniquely identifies a destination GBFD-
DENO No. BSC6900 atory) entity. 118602
GBFD-
111203
Whether to start the anti-theft
ADD MRFD-
equipment of the BTS.
DESC Description BSC6900 OP(Optional) Description of the operator account 210305
In multi-mode scenario, the value
of this parameter in this mode
SET must be the same as the value of
DESTEALSE Anti-theft BTSOUTPUT( the corresponding parameter in GBFD-
T Equipment BSC6900 Optional) another mode. 111202
Destination IP PING
DESTIP address BSC6900 IP(Mandatory) Destination IP address None
PING
TRC
Destination IP MAC(Mandato
IPADDR(Man
DESTIP address BSC6900 ry)
datory) Destination IP address None
TRC
MAC(Mandato
ADD
ry)
Destination IP IPRTBIND(Ma
PING
DESTIP address BSC6900 ndatory) Destination IP address None
BTSCFM(Man
datory)
TRC
BTSCFM(Man Identifies a maintenance point in
DESTMEPID RMEP ID BSC6900 datory) the maintenance group None
ADD
BTSAUTOPL
Transport Link AN(Mandatory Type of the object the BTS is GBFD-
DESTNODE Type BSC6900 ) connected to 510701
MOV
Interval for sending test TRAU
Destination Main BCCH(Manda ID of the TRX that carries the MRFD-
frames in the period of class-2
DESTTRXID BCCH TRX ID BSC6900 tory) destination main BCCH 210301
mute detection.Test TRAU frame is
sent at the specified interval till the
Maximum number of periods in
Period of Mute SET peer end responds or the timer of
which the local end does not
DETECTFRA Detect Class2 GCELLSOFT( "Period of Mute Detection Class 2" GBFD-
receive BFD packets from the peer
MEPERIOD TRAU Frame BSC6900 Optional) expires. 111203
end. If the number of periods in
which the local end does not
ADD receive BFD packets from the peer
DETECTMUL BTSBFD(Opti end reaches this parameter, the GBFD-
T Detect Period BSC6900 onal) BTS reports a BFD session fail. 118609
ADD
DEVICENAM BTSRETANT( MRFD-
E Deviced Name BSC6900 Mandatory) Name of the RET antenna 210602
ADD
BTSRETANT( MRFD-
ADD
DEVICENO Device No. BSC6900 Mandatory) Number of the RET antenna. 210602
PPPLNK(Man
datory) GBFD-
ADD 118611
Borrowed device ADD
MPGRP(Man Device IP address of the interface GBFD-
DEVIP IP address BSC6900 GEXT3GCEL
datory) board used by the PPP link. 118622
L(Mandatory)
SET
ADD
GCELLHOFD
Device IP DEVIP(Manda
DBA2(Mandat
DEVTYPE Address Type BSC6900 tory) Device IP Address Type None
ory)
SET GBFD-
GCELLHOTD 114301
DBA2(Mandat Downlink frequency of the external GBFD-
DF DL UARFCN BSC6900 ory) 3G cell 114302
"YES", indicating that all the calls
for the operator are accessed
through the CN identified by the
DPC.
When multiple DPCs are
configured, this parameter also
determines the DPC that allows
the generation of ESN. In this
SET case, the parameter is set to
BTSDFCUBP( "YES"
Number forofthis
theDPC while the
slot where the value GBFD-
DFCBSN DFCB Board SN BSC6900 Optional) for
DFCBother DPCs is "NO".
is installed 111202
For the CN of a secondary
operator, this parameter must be
SET
set to "YES" when only one DPC is
DFCB Board BTSDFCUBP( Number of the subrack where the GBFD-
configured. This indicates that all
DFCBSRN SRN BSC6900 Optional) Whether to use the customized
DFCB is installed 111202
the calls for the secondary
port
operator are accessed through the
DEFAULTPORT: indicating that the
ADD CN. When multiple DPCs are
FTP server uses the default port
GCNNODE(O configured, this parameter is GBFD-
21 as a command port and port 20
DFDPC Default DPC BSC6900 ptional) invalid. 117401
as a data port to provide FTP
services GBFD-
The Type of FTP SET CUSTOMPORT: indicating that the 111203
DFTPORTSW Server FTPSSRV(Ma FTP server uses the customized MRFD-
T Command Port BSC6900 ndatory) port to provide FTP services 210305
ADD
DHCPRLY(Ma GBFD-
DHCPRLYID DHCP Relay ID BSC6900 ndatory) DHCP Relay ID 111202
DIESELENGI SET
Whether to allow an MS to report
NESAVESWI Diesel Engine BTSDPMUBP Whether to enable the diesel GBFD-
the classmark and whether to hand
TCH Save Switch BSC6900 (Optional) engine save switch 111202
over the MS from the SDCCH in
SET the frequency band for the main GBFD-
DIFFBANDSD Different Band GCELLCHMG BCCH to the SDCCH in a different 110608
CCHUSINGO SDCCH Using BASIC(Option frequency band according to the GBFD-
PTIMIZE Optimize BSC6900 al) classmark 111005
ADD
SUBTSK(Man Day in the month on which the GBFD-
DINM Date in Month BSC6900 datory) command can be executed. 111203
ADD
SUBTSK(Man Day in the week on which the GBFD-
DLD
DINW Date in Week BSC6900 datory) command can be executed. 111203
LICENSE(Ma
ndatory) GBFD-
ULD The relative path in the working 111203
LICENSE(Ma path of the FTP user in the FTP MRFD-
DIR Directory BSC6900 ndatory) server 210403
RETANTCFG(
Optional)
DLD
BTSPATCH(O Whether a cell is a repeater. With
ptional) simpler functions than a BTS, a
ULD Whether to enable a directed retry.
repeater is a coverage extension
BTSLOG(Opti The directed retry is to hand over
device of a BTS. It is applied to
onal) an MS to a neighboring cell in the
widely-stretched areas or indoor
DLD same procedure as the handover.
areas to solve the dead zone
BTSSW(Optio The directedthe
Directory retry is an emergency
problem ofofBTS software
coverage. toUsing
be GBFD-
DIR File Directory BSC6900 nal) measure
downloaded applicable to abnormal 111202
repeaters
Whether the cannot
BSCincrease
sends anthe
traffic peaks in some areas of a
traffic capacity
Assignment Failofmessage
a networkwith butthe
radio network. You should not use
DirectedRetry Directed Retry SET improve
cause the coverage
value of directed only.
retry to the
Timer
the to control
directed retrytheasduration
a major in
AssFailSendE AssFail Send AITFOTHPAR Because
MSC before the the
BTS BSCcoverage
initiates a GBFD-
which the
means BSC prevents
of solving traffic the
nable Enable BSC6900 A(Optional) increases,
directed however,
retry procedure the total traffic 110607
handover
congestion. If the directed retry the
of an MS from which
improves accordingly.
SET BSC
always receives
occurs the Disconnect
in some areas of a
The
Delay setting of thisdiversity
of transmit parameter when has
GCELLBASIC message.
network, If the MS
consider is handed
adjusting theover
effects
16QAM on handovers.
iscell
used. Repeaters
Generally, theand
DIRECTRYE PARA(Option to a new
sector and TRXafter the MS sends
configuration GBFD-
use the asynchronous
parameter transfer
N Directed Retry BSC6900 al) networkislayout.
the Disconnect applicable
message, to the
general
MS 110607
mode
fading (ATM) due to a The
environments. greater transmit
cannot receive the Release
distance
diversity can between them.bring
generally Therefore,
afrom
gain
Acknowledgement
Delay of transmit message
diversity when
SET handovers
of 3original between
dB to 5 cell.dB. The repeaters
fading are
the
32QAM Thus,
is used.Synchronous the
Generally, the MS
DIRMAGANSI Directly Magnifier ADD
GCELLSOFT( asynchronous. GBFD-
conditions
cannot vary with the MS
be disconnected. Togeneral
protect
TEFLAG BTS Flag BSC6900 GEXT3GCEL
Optional) parameter
handovers is applicable
will fail. MSs to 110601
location;
from such therefore,
a disconnection in a fixed
failure,
L(Mandatory) fading environments. The transmit
time
the delay obtain different gains. In
SET diversity can generally bring athe
BSC does not hand over gain GBFD-
DisconnectHa Disconnect SET addition,
MS within the
the EDGE
durationservice
of coding
this timer 110601
GCELLHOFD of 3 dB to 5 dB. The fading
ndoverProtect Handover Protect OTHSOFTPA Delay
may
after beofadversely
the transmit
BSC diversity
affected.when To
DBA2(Mandat conditions varyreceives
with thethe MS GBFD-
Timer Timer BSC6900 RA(Optional) 8PSK
avoid is used.
the
Disconnect Generally,
preceding
message cases,
from thetheMS.
the 510501
ory) location; therefore, MSs in a fixed
parameter
delay of transmitis applicable
diversity to must
general be
SET time delay obtain different gains. In
fading environments.
configurable and can The be set transmit
for
GCELLHOTD addition,
Whether theactivate
to EDGE service
transmit coding
diversityand
GMSK can generally
16QAM bring a gain
respectively.
DBA2(Mandat may be
diversity adversely
on5 the affected. To
of 3 dB
Only dB. common
thetodouble-transceiver
The fading channel
BTSs
GBFD-
DIVERSITY Diversity BSC6900 ory) avoid
of a 3G thecell preceding cases, the 114301
conditions vary with
and the distributed BTSs can bethe MS
delay of transmit diversity must be
SET location;
configured therefore,
with thisMSs in a fixed
parameter. For
configurable and can be set for
Diversity GCELLBASIC time delayofobtain
the BTSs other different
types, this gains. In
GMSK and 32QAM respectively.
DIVERT16QA Transmitter PARA(Option addition,
parameterthe is EDGE
set to an service
invalidcodingvalue GBFD-
Only the double-transceiver BTSs
MDELAY 16QAM Delay BSC6900 al) may
255. be adversely affected. 510804
and the distributed BTSs can be
Therefore, the time delay of
SET configured with this parameter. For
transmit diversity must be
Diversity GCELLBASIC the BTSs of other types, this
configurable and can be separately
DIVERT32QA Transmitter PARA(Option parameter is set to an invalid value GBFD-
set for GMSK and 8PSK. Only the
MDELAY 32QAM Delay BSC6900 al) 255. 510804
double-transceiver BTSs and the
SET distributed BTSs can be configured
Diversity GCELLBASIC with this parameter. For the BTSs
DIVERT8PSK Transmitter PARA(Option of other types, this parameter is GBFD-
DELAY 8PSK Delay BSC6900 al) set to an invalid value 255. 114201
SET
Four Diversity BTSRXUBP( Whether to support transmitting GBFD-
DivSwitch Receiver BSC6900 Optional) diversity or four diversity receiving 115902
DSP ADD
code[Divided N7DPC(Mand DSP code expressed in the format GBFD-
DPCDNF Number] BSC6900 atory) of segments 8-8-8 111804
It is one of the key fields of
identifying the block of A interface
BLK CIC status and indicates the DPC
DPC Group ACIC(Mandat group index of the circuit ID of the GBFD-
DPCGIDX Index BSC6900 ory) Index of a DPC
A interface to begroup.
blocked. 111803
ADD When multiple DPCs or one DPC
N7DPC(Mand serves as a logical entity, this
ADD
atory) logical entity is called a DPC
DPC Group AE1T1(Option DSP
Indextype.
of the DPC group. see "ADD GBFD-
ADD group.
DPCGIDX Index BSC6900 al) STP: indicates the signaling
MTP3RT(Man GCNNODE" command.
When the MSC pool function is
111803
transfer point.
datory) activated, the user plane resources
A: indicates the signaling point of
ADD on the A interface are shared
the A interface control signaling
DPC Group MTP3LKS(Ma
GCNNODE(M among the MSCs in the pool, and GBFD-
plane.
DPCGIDX Index BSC6900 ndatory)
andatory) thus load balancing is achieved. 117401
IUR_G: indicates the signaling
ADD
point of the base station controller
M3DE(Mandat
ADD that is connected to the BSC.
ory)
N7DPC(Mand LB: indicates the signaling point of GBFD-
ADD
DPCT DSP type BSC6900 atory) the LB interface. 111804
GCNNODE(M
andatory)
ADD
GEXTSMLC( The DSP index uniquely identifies GBFD-
DPX DSP index BSC6900 Mandatory) a DSP. 111804
ADD
GNRNC(Man Iur-g DPC index of a neighboring MRFD-
DPX DPX BSC6900 datory) RNC 211402
Whether to optimize the call drops
Maximum signal level difference GBFD-
resulting from Abis territorial link
Directed Retry ADD between the neighbor cell and the 110601
fault. The value 0 means
DRHOLEVRA Handover Level G2GNCELL(O serving cell for triggering directed GBFD-
"optimize" and 1 means "not
NGE Range BSC6900 ptional) retry 510501
optimize". If the value of this
Whether to optimize the call drops
parameter is 0, the call drops
resulting from connection failure
DROPCTRLA SET resulting from this cause are not
(handover access failure). The
BISCONNFAI Drop Optimize GCELLSOFT( brought into the statistics of call GBFD-
value 0 means "optimize" and 1
L ABIS Link Failure BSC6900 Optional) Whether
drops. to optimize the call drops 111004
means "not optimize". If the value
resulting from connection failure,
of this parameter is 0, the call
operation and maintenance (OM)
DROPCTRLC Drop Optimize SET drops resulting from this cause are
intervention. The value 0 means
ONNFAILHO Conn Fail[HO GCELLSOFT( not brought into the statistics of GBFD-
"optimize" and 1 means "not
ACCFAIL access fail] BSC6900 Optional) call drops. 111004
optimize". If the value of this
parameter is 0, the call drops
Drop Optimize SET resulting from this cause are not
DROPCTRLC Conn Fail[OM GCELLSOFT( brought into the statistics of call GBFD-
ONNFAILOM intervention] BSC6900 Optional) drops. 111004
resulting from a connection failure
except for handover access failure,
OM intervention, radio link failure,
and unavailability of radio
resources. The value 0 means
"optimize" and 1 means "not
optimize". If the value of this
Whether to optimize the call drops
parameter is 0, the call drops
resulting from connection failure
DROPCTRLC SET resulting from this cause are not
(radio link failure). The value 0
ONNFAILOTH Drop Optimize GCELLSOFT( brought into the statistics of call GBFD-
means "optimize" and 1 means
ER Conn Fail[other] BSC6900 Optional) drops. 111004
"not optimize". If the value of this
Whether to optimize the call drops
parameter is 0, the call drops
resulting from connection failure
DROPCTRLC Drop Optimize SET resulting from this cause are not
(unavailability of radio resources).
ONNFAILRLF Conn Fail[radio GCELLSOFT( brought into the statistics of call GBFD-
The value 0 means "optimize" and
AIL link fail] BSC6900 Optional) drops. 111004
1 means "not optimize". If the
Drop Optimize value of this parameter is 0, the
Whether to optimize the call drops
DROPCTRLC Conn SET call drops resulting from this cause
resulting from equipment fault. The
ONNFAILRR Fail[resource not GCELLSOFT( are not brought into the statistics of GBFD-
value 0 means "optimize" and 1
NOTAVL available] BSC6900 Optional) call drops. 111004
means "not optimize". If the value
Whether to optimize the call drops
of this parameter is 0, the call
resulting from error indication
Drop Optimize SET drops resulting from this cause are
(unsolicited DM response). The
DROPCTRLE Equipment GCELLSOFT( not brought into the statistics of GBFD-
value 0 means "optimize" and 1
QUIPFAIL Failure BSC6900 Optional) call drops. 111004
means "not optimize". If the value
Whether to optimize the call drops
Drop Optimize of this parameter is 0, the call
resulting from error indication
DROPCTRLE Err SET drops resulting from this cause are
(sequence error). The value 0
RRINDDMRS Ind[unsolicited GCELLSOFT( not brought into the statistics of GBFD-
means "optimize" and 1 means
P DM response] BSC6900 Optional) call drops. 111004
"not optimize". If the value of this
Whether to optimize the call drops
parameter is 0, the call drops
resulting from error indication
DROPCTRLE Drop Optimize SET resulting from this cause are not
(T200 timeout). The value 0 means
RRINDSEQE Err Ind[sequence GCELLSOFT( brought into the statistics of call GBFD-
"optimize" and 1 means "not
RR error] BSC6900 Optional) drops. 111004
optimize". If the value of this
Whether to optimize the call drops
parameter is 0, the call drops
resulting from forced handover
Drop Optimize SET resulting from this cause are not
failure. The value 0 means
DROPCTRLE Err Ind[T200 GCELLSOFT( brought into the statistics of call GBFD-
"optimize" and 1 means "not
RRINDT200 timeout] BSC6900 Optional) drops. 111004
optimize". If the value of this
Whether to optimize the call drops
parameter is 0, the call drops
resulting from incoming-BSC
Drop Optimize SET resulting from this cause are not
handover timeout. The value 0
DROPCTRLF Forced Handover GCELLSOFT( brought into the statistics of call GBFD-
means "optimize" and 1 means
ORCHOFAIL Failure BSC6900 Optional) drops. 111004
"not optimize". If the value of this
Whether to optimize the call drops
Drop Optimize parameter is 0, the call drops
resulting from outgoing internal
Into-BSC SET resulting from this cause are not
inter-cell handover timeout. The
DROPCTRLI Handover GCELLSOFT( brought into the statistics of call GBFD-
value 0 means "optimize" and 1
NBSCHO Timeout BSC6900 Optional) drops. 111004
means "not optimize". If the value
Whether to optimize the call drops
Drop Optimize of this parameter is 0, the call
resulting from intra-cell handover
DROPCTRLI Intra-BSC SET drops resulting from this cause are
timeout. The value 0 means
NTRABSCOU Handover GCELLSOFT( not brought into the statistics of GBFD-
"optimize" and 1 means "not
THO Timeout BSC6900 Optional) Whether
call drops.to optimize the call drops 111004
optimize". If the value of this
resulting from no MS
Drop Optimize parameter is 0, the call drops
measurement reports for a long
DROPCTRLI Intra-Cell SET resulting from this cause are not
time. The value 0 means
NTRACELLH Handover GCELLSOFT( brought into the statistics of call GBFD-
"optimize" and 1 means "not
O Timeout BSC6900 Optional) drops. 111004
optimize". If the value of this
parameter is 0, the call drops
Drop Optimize SET resulting from this cause are not
DROPCTRLN No MR for Long GCELLSOFT( brought into the statistics of call GBFD-
OMR Time BSC6900 Optional) drops. 111004
Whether to optimize the call drops
resulting from outgoing-BSC
handover timeout. The value 0
means "optimize" and 1 means
"not optimize". If the value of this
Drop Optimize parameter is 0, the call drops
Whether to optimize the call drops
Out-BSC SET resulting from this cause are not
resulting from release indications.
DROPCTRLO Handover GCELLSOFT( brought into the statistics of call GBFD-
The value 0 means "optimize" and
UTBSCHOT8 Timeout BSC6900 Optional) drops. 111004
1 means "not optimize". If the
value of this parameter is 0, the
Whether to optimize the call drops
Drop Optimize SET call drops resulting from this cause
resulting from resource check. The
DROPCTRLR Release GCELLSOFT( are not brought into the statistics of GBFD-
value 0 means "optimize" and 1
ELIND Indication BSC6900 Optional) call drops. 111004
means "not optimize". If the value
of this parameter is 0, the call
SET drops resulting from this cause are
DROPCTRLR Drop Optimize GCELLSOFT( not brought into the statistics of GBFD-
If the duration for buffering the
ESCHK Resource Check BSC6900 Optional) call drops. 111004
data in queue 0 is more than or
ADD equals to the value of this
Packet discard PORTFLOWC parameter, the subsequent
DROPPKTTH threshold of TRLPARA(Opt packets added to queue 0 are
If the duration for buffering the
D0 queue 0 [ms] BSC6900 ional) discarded. None
data in queue 1 is more than or
ADD equals to the value of this
Packet discard PORTFLOWC parameter, the subsequent
DROPPKTTH threshold of TRLPARA(Opt packets added to queue 1 are
If the duration for buffering the
D1 queue 1 [ms] BSC6900 ional) discarded. None
data in queue 2 is more than or
ADD equals to the value of this
Packet discard PORTFLOWC parameter, the subsequent
DROPPKTTH threshold of TRLPARA(Opt packets added to queue 2 are
If the duration for buffering the
D2 queue 2 [ms] BSC6900 ional) discarded. None
data in queue 3 is more than or
ADD equals to the value of this
Packet discard PORTFLOWC parameter, the subsequent
DROPPKTTH threshold of TRLPARA(Opt packets added to queue 3 are
If the duration for buffering the
D3 queue 3 [ms] BSC6900 ional) discarded. None
data in queue 4 is more than or
ADD equals to the value of this
Packet discard PORTFLOWC parameter, the subsequent
DROPPKTTH threshold of TRLPARA(Opt packets added to queue 4 are
If the duration for buffering the
D4 queue 4 [ms] BSC6900 ional) discarded. None
data in queue 5 is more than or
ADD equals to the value of this
Packet discard PORTFLOWC parameter, the subsequent
DROPPKTTH threshold of TRLPARA(Opt packets added to queue 5 are
D5 queue 5 [ms] BSC6900 ional) discarded. None
SET MRFD-
DST DaylightSave BSC6900 TZ(Optional) Whether daylight saving time starts 210301
ULD
Destination File BTSDEVFILE( GBFD-
DSTF Name BSC6900 Mandatory) Name of the destination file 111202
ADD
Destination IP IPRT(Mandat
DSTIP address BSC6900 ory) Destination IP address None
ADD
Destination IP BTSBFD(Man Destination IP address of BFD GBFD-
ADD
DSTIP Address BSC6900 datory) Session. 118609
BTSIPRT(Man
datory)
ADD
Destination IP BTSIPRTBIN GBFD-
DSTIP Address BSC6900 D(Mandatory) Destination IP address 118601
ADD
Destination IPRT(Mandat
ADD
DSTMASK address mask BSC6900 ory) Subnet mask None
BTSIPRT(Man
datory)
ADD
Destination BTSIPRTBIN GBFD-
DSTMASK Address Mask BSC6900 D(Mandatory) Subnet mask of BTS Route. 118601
ADD
Destination port TSCROSS(M
DSTPORTNO No. BSC6900 andatory) Destination of timeslot cross None
ADD
Destination TSCROSS(M
DSTTSMASK timeslot mask BSC6900 andatory) Target timeslot mask None
Threshold of the load in the target
cell for the directed retry. Only a
Directed Retry SET cell whose load is lower than or
Type of the DRX supporting the
DTLOADTHR Load Access GCELLCCBA equal to this threshold can be GBFD-
VGCS service. An MS reads the
ED Threshold BSC6900 SIC(Optional) selected as a candicate target cell. 110607
NCH only when a new notification
message of group call arrives. This
SET helps save power of the MS. This
GCELLGSMR parameter is mandatory for a GBFD-
DTRTYPE DRX Type BSC6900 (Optional) SAGEM MS. 510301
ADD
BTSANTFEE
DERBRD(Ma Downlink TRX index number of the GBFD-
DTRX Down Link No. BSC6900 ndatory) newly added board 111202
SET
BTSANTFEE
DERCONNEC Index number of the downlink GBFD-
DTRX Down Link No. BSC6900 T(Optional) tributary 111202
ADD
BTSANTFEE TRX board pass number
Down TRX Board DERBRD(Opti connected with the downlink GBFD-
DTRXPN Pass No. BSC6900 onal) tributary 111202
SET
BTSANTFEE TRX board pass number
Down TRX Board DERCONNEC connected with the downlink GBFD-
DTRXPN Pass No. BSC6900 T(Optional) tributary 111202
ADD
BTSANTFEE Number of the slot where the TRX
Down TRX Slot DERBRD(Ma board that connects to downlink GBFD-
DTRXSN No. BSC6900 ndatory) tributary is located 111202
SET
BTSANTFEE Number of the slot where the TRX
Down TRX Slot DERCONNEC board that connects to downlink GBFD-
DTRXSN No. BSC6900 T(Optional) tributary is located 111202
ADD
BTSANTFEE Number of the subrack where the
Down TRX DERBRD(Ma TRX board that connects to GBFD-
DTRXSRN Subrack No. BSC6900 ndatory) downlink tributary is located 111202
SET
BTSANTFEE Number of the subrack where the
Down TRX DERCONNEC TRX board that connects to GBFD-
DTRXSRN Subrack No. BSC6900 T(Optional) downlink tributary is located 111202
Whether a BTS randomizes the
Dummy Bit SET dummy bits (0x2B) in all the
DUMMYBITR Randomization GCELLSOFT( signaling messages that the BTS GBFD-
ANDSWITCH Switch BSC6900 Optional) sends to an MS 113521
SET
BTSETHPOR The duplex mode of FE port is GBFD-
DUPLEX Duplex Mode BSC6900 T(Optional) duplex or half-duplex. 118601
STR
BTSTST(Man GBFD-
DURATH Duration Hour BSC6900 datory) Duration for starting the BTS test 111207
STR
TRXBURSTT
ST(Mandatory Duration for starting the TRX idle GBFD-
DURATH Duration Hour BSC6900 ) timeslot test 111207
STR
BTSTST(Man GBFD-
DURATM Duration Minute BSC6900 datory) Duration for starting the BTS test 111207
STR
BTSTST(Man Duration for starting the TRX idle GBFD-
Downlink Downlink multiplex threshold of
DURATS Duration Second BSC6900 datory) timeslot test 111207
Multiplex dynamic channel conversion.
Threshold of When the subscriber number on
Dynamic SET the channel reaches the value
An MS can be used to test the Um
DWNDYNCH Channel GCELLPSCH (threshold/10), the dynamic GBFD-
interface software synchronization
NTRANLEV Conversion BSC6900 M(Optional) channel conversion is triggered. 113101
only when the DL signal strength
after the power control
ADD compensation in the test cell and
DL Signal AISSCFG(Opt the observed cell is higher than GBFD-
DWNINTEN Strength Limit BSC6900 ADD
ional) this limit. 118201
DXX(Mandato
ry)
ADD Number of a DXX. It is unique in
ADD
BTSCONNEC one BSC6900 and uniquely GBFD-
DXXCONNEC
DXXINDEX Up DXX Index BSC6900 T(Mandatory) identifies a DXX. 111202
T(Mandatory)
ADD Time to wait for releasing the
DXXTSEXGR dynamic
Number
Mode of of
channel
a DXX.after
preempting is the
It the TBFinon
unique
dynamic
ELATION(Man the
one dynamic
BSC6900 channel
and is released.
uniquely
channel for the CS domain and PS GBFD-
DXXINDEX DXX Index BSC6900 datory) When all the
identifies TBFs on the channel
a DXX. 111203
domain. Only the channel
are released, the dynamic channel
configured in the TCH/F mode can
is not released at once. Instead,
ADD be preempted.
the timer is started when the
BTSCONNEC "Preempt all dynamic TCHFs" GBFD-
channels are idle. Before the timer
DXXPN Up DXX Port No. BSC6900 T(Mandatory) indicates
Number ofthe thecircuit
upperdomain can
DXX port 111202
expires, if new service request is
preempt all the dynamic channels.
Timer of received, the dynamic channel is
"No preempt of CCHs" indicates
Releasing Idle SET still occupied and timer is stopped;
the circuit domain can preempt all
DYNCHFREE Dynamic GCELLPSCH otherwise, the dynamic channel is GBFD-
the dynamic channels except the
TM Channel BSC6900 M(Optional) released after the timer expired. 113101
CCHs.
Level of "No preempt of service TCHF"
Preempting SET indicates the circuit domain cannot
DYNCHNPRE Dynamic GCELLPSCH preempt all the dynamic channels GBFD-
EMPTLEV Channel BSC6900 M(Optional) of bearer services. 113101
Reservation Number of full-rate TCHs reserved
Threshold of for the CS domain. This parameter
Dynamic SET is valid only when "Level of
DYNCHTRAN Channel GCELLPSCH Preempting Dynamic Channel" is GBFD-
RESLEV Conversion BSC6900 M(Optional) set to LEVEL1 or LEVEL2. 113101
SET This parameter specifies whether
GCELLBASIC to allow the BSC6900 to enable
DYNOpenTrx Allow Dynamic PARA(Option the TRX Intelligent Shutdown GBFD-
Power Shutdown TRX BSC6900 al) feature on a cell. 111602
SET
Dynamic GCELLCHMG Whether to enable the cell to
DYNPBTSUP Transmission Div BASIC(Option support dynamic transmit diversity GBFD-
PORTED Supported BSC6900 al) or dynamic PBT 118101
STR
TRANSPERF
Number of the E1 port. For the
TST(Mandator GBFD-
BTS3012, BTS3012AE, BTS3012
E1DURAT Duration BSC6900 y) Duration for the test in E1 mode 111202
II and the UTRP board in
STR SingleRAN BTSs, the number can
TRANSPERF be a value from 0 to 7. For other
TST(Mandator BTSs, the number can be a value GBFD-
E1PORT Port No. BSC6900 y) from 0 to 3. 111202
ADD
E1PORTNOI BTSABISHDL
NBTSCONBS E1 Port No CPATH(Mand Number of the E1 port on the BTS GBFD-
C Connect To BSC BSC6900 atory) connected to the BSC. 118401
Number of the port extended by
STR the backboard TOP
TRANSPERF communication mechanism of the
Transmission TST(Mandator BTS. The TOP relation can be GBFD-
E1SLCTTMU Board Type BSC6900 y) Type of thebetween
configured transmission board
the port on the 111207
BTS board panel and the port on
SET the BTS backplane, thus extending
COPTLNK(Op the ports. This function is used for
E1T1PN E1/T1 port No. BSC6900 tional) the
E1/T1configuration
port numberof the multi-mode None
Number of the E1/T1 port from
base station. The range 16-19
which the BTS extracts the
indicates the number of the E1/T1
SET transport clock. This parameter is
port on the backplane of the
BTSCLK(Man valid only when the clock type is MRFD-
primary BBU and the range 24-27
E1T1PN E1/T1 Port No. BSC6900 datory) set to IP_TRANSFER. 210501
indicates the number of the E1/T1
ADD port on the backplane of the
BTSTOPCON secondary BBU. A BBU supports
E1T1PORTN Backboard E1/T1 FIG(Mandator only the E1 port numbered from 16 MRFD-
O Port No. BSC6900 y) to 19 on the backplane. 211501
Type of the E1/T1 from which the
BTS extracts the transport clock.
Peer IP address to be checked.
SET This parameter is valid only when
The input address (CHKIPADDR)
BTSCLK(Man the clock type is set to MRFD-
must be the address (regardless of
E1T1TYPE E1/T1 Type BSC6900 datory) IP_TRANSFER. 210501
the network segment address or
host address of the peer address)
ADD in the network segment specified
Check IP IPPATH(Mand by the (PEERIPADDR, GBFD-
ECHOIP address BSC6900 atory) PEERMASK). 118605
control (ECSC) parameter
specifies whether the MSs in a cell
usea early
As classmark
performance sending.
counter After
for 3G
a successful
cells, immediate
Ec/No indicates the ratio of
assignment,
the energy per thereceived
MS sendschip to the
additional classmark
spectral noise power information
density. to
the network
If the Ec/No as of aearly as possible.
3G neighbor cell
The additional
is greater classmark
than "HOECNOTH3G"
ADD information mainly contains
plus this parameter, the
the neighbor
G3GNCELL(O CM3
cell is(classmark
listed in the3)candidate
information.cell GBFD-
Threshold for determining the layer
ECNOOFF Ec/No Offset BSC6900 ptional) The
queue.CM3 (classmark 3) 114301
of the 3G neighbor cell. If the
information contains the frequency
Ec/No of the 3G neighbor cell is
band support capability of the MS
Ec/No Threshold ADD less than this threshold, the
(used for the future channel
for Layer Of 3G GEXT3GCEL neighbor cell is set to the lowest GBFD-
assignment), power information
ECNOTHRES Cell BSC6900 L(Optional) layer (layer 5). 114301
about each frequency band
supported by the MS (used for the
SET handover between different
GCELLCCBA frequency bands), and encryption GBFD-
EXP
ECSC ECSC BSC6900 SIC(Optional) capability of the MS. 111101
ALMLOG(Opti
onal)
STA
ALMLOG(Opti End serial number of the alarm MRFD-
ECSN End Serial No. BSC6900 onal) record 210304
ADD
SUBTSK(Opti Date when the scheduled task is GBFD-
ED End Date BSC6900 onal) stopped 111203
STR
BTSLOG(Opti GBFD-
EDATE End Date BSC6900 onal) End date 111202
According to the P/N rule, if the
conditions for the handover
SET
between the subcells of an
TZ(Mandatory End date of the daylight saving MRFD-
enhanced dual-frequency network
EDAY End date BSC6900 ) time 210301
are met during P of N
According to the P/N rule, if the
SET measurements, the handover is
conditions for the handover
Number of GCELLHOED triggered.
between the subcells of an
EDBLASTTIM Satisfactory BPARA(Optio This parameter specifies the GBFD-
enhanced dual-frequency network
E Measurements BSC6900 nal) number P. 114402
are met during P of N
SET measurements, the handover is
GCELLHOED triggered.
EDBSTATTIM Total Number of BPARA(Optio This parameter specifies the GBFD-
If the current system flow control
E Measurements BSC6900 nal) number N. 114402
level is greater than this
SET parameter, the handover between
Subcell HO GCELLHOED the underlaid and overlaid subcells
EDBSYSFLO Allowed Flow BPARA(Optio due to low or high load in the GBFD-
WLEV Control Level BSC6900 nal) underlaid subcell is not allowed. 114402
According to the P/N rule, if a
neighbor cell meets the conditions
SET
for selecting the neighbor cell for
GCELLGPRS( Whether the current cell supports GBFD-
edge handover in P of N
EDGE EDGE BSC6900 Optional) EDGE 114201
measurement reports, the edge
According to the P/N rule, if a
handover to the neighbor cell is
neighbor cell meets the conditions
ADD triggered.
for selecting the neighbor cell for
EDGEADJLA Edge HO AdjCell G2GNCELL(O This parameter specifies the GBFD-
edge handover in P of N
STTIME Valid Time BSC6900 ptional) number P. 510501
measurement reports, the edge
handover to the neighbor cell is
ADD triggered.
EDGEADJST Edge HO AdjCell G2GNCELL(O This parameter specifies the GBFD-
According to the P/N rule, if the
ATTIME Watch Time BSC6900 ptional) number N. 510501
conditions for edge handover are
met in P of N measurement
Handover SET reports, the handover is triggered.
According to the P/N rule, if the
Algorithm II Edge GCELLHOBA This parameter specifies the GBFD-
conditions for edge handover are
EDGELAST HO Valid Time BSC6900 SIC(Optional) number P. 510501
met for P seconds within N
seconds, the handover is
Handover SET triggered.
Algorithm I Edge GCELLHOBA This parameter specifies the GBFD-
According to the P/N rule, if the
EDGELAST1 HO Valid Time BSC6900 SIC(Optional) number P. 110601
conditions for edge handover are
met in P of N measurement
Handover SET reports, the handover is triggered.
According to the P/N rule, if the
Algorithm II Edge GCELLHOBA This parameter specifies the GBFD-
conditions for edge handover are
EDGESTAT HO Watch Time BSC6900 SIC(Optional) number N. 510501
met for P seconds within N
seconds, the handover is
Handover SET triggered.
Algorithm I Edge GCELLHOBA This parameter specifies the GBFD-
EDGESTAT1 HO Watch Time BSC6900 SIC(Optional) number N. 110601
SET
BTSLOADCT
EFTIMMFLA Effect RL(Mandatory GBFD-
G Immediately Flag BSC6900 ) Effect Immediately Flag(reserve) 111202
SET
EGPRS11BIT Support 11BIT GCELLPSBA Whether to support the 11-bit GBFD-
CHANREQ EGPRS Access BSC6900 SE(Optional) EGPRS access request 119201
GBFD-
Used for EDGE 8PSK
SET 510803
transmission quality statistics. If
GCELLGPRS( Whether the current cell supports GBFD-
MEAN_BEP is less than or equals
EGPRS2A EGPRS2-A BSC6900 Optional) EGPRS2-A 510804
to this threshold, the transmission
quality is regarded to be
Used for EDGE GMSK
SET deteriorated. MEAN_BEP indicates
transmission quality statistics. If
EGPRSBEPLI EDGE 8PSK GCELLNC2P the average error code rate in one GBFD-
MEAN_BEP is less than or equals
MIT8PSK Quality Threshold BSC6900 ARA(Optional) measurement report period. 116201
to this threshold, the transmission
quality is regarded deteriorated.
SET MEAN_BEP indicates the average
EGPRSBEPLI EDGE GMSK GCELLNC2P error code rate in one GBFD-
MITGMSK Quality Threshold BSC6900 ARA(Optional) measurement report period. 116201
Priority level of an emergency call.
Type
Whether of the end date.
to allow "WEEK"of
If this parameter isthesetfunction
to 15, the
indicates
enhanced that the end date is a
functions ofmulti-level
reservingprecedence
TCHs for
weekday.
and preemption"DATE"(eMLPP).indicatesWith that the
the
emergency calls and preempting
Whether
end
eMLPP date to
is verify
a
function month the
enabled, centralized
day. thetwo
TCHs are not enabled. If the
signaling
"DATEWEEK"
network linkuse
inindicates
the casethe of the
endlink
functionscan need todifferent
be enabled, policiesset
SET establishment.
date
such is expressed
as queuing, ON: byemergency
a
this parameter to apreemption,
value from or 1 to
TZ(Mandatory verification,
combination
directed that is, the
of weekday onverification
and MRFD-
14. If theretryvaluebased of "Emergency the Call
EM EndType BSC6900 ) is not required.
month
priorities day. OFF:calls
of different non when 210301
Preemption Permitted" is ON, this
emergency
network verification,occupied.
resources that is, the
parameter can alsoare be used for If
verification
this is required during the
SET TCH preemption. The value 1when
parameter is set to YES,
establishment
preemption of a signaling
occurs,priority
the MSand with14in
link
Priority of GCELLCCAD( means the highest GBFD-
a
thelink set.
lowest Through verification, the
EMCPRILV Emergency Call BSC6900 Optional) means the priority
lowest.initiates a 110202
stable operation
handover, and the MS with a state of a
signaling
higher priority link canseizes be ensured.
the idle You
ADD are advised
channel aftertoause the normal
handover. If this
EMERGENC Emergency MTP3LKS(Op verification.
parameter isThat set tois,NO, the emergency
an MS with GBFD-
Y verification BSC6900 tional) verification
a lower priority switch is set to
releases theOFF. 111804
channel, the MS with a higher GBFD-
ADD priority seizes the idle channel 118611
Error emit MPGRP(Optio after the release. GBFD-
EMITTHD threshold BSC6900 nal) The
ErroreMLPP has up to seven
emit threshold. 118622
priorities: A, B, 0, 1, 2, 3, and 4.
SET
The two highest priorities A and B
BSCABISPRI
are internally reserved for local use
MAP(Optional Differentiated service code of the GBFD-
only. Priorities 0 to 4 can be
EMLDSCP EML DSCP BSC6900 ) specified EML 111202
subscribed by MSs for global use.
With the support of the MSC, HLR,
SET and mobile terminal (containing a
GCELLCCBA SIM card), the eMLPP function can GBFD-
Indicating whether the eMLPP
EMLPPEN Allow EMLPP BSC6900 SIC(Optional) be perfectly implemented. 115001
function is enabled in a cell and
Whether to include the Emlpp
indicating the eMLPP priority of the
Priority information element in the
SET cell. From high to low, the priorities
Paging Command message over
EMLPPPRIO GCELLGSMR are A, B, 0, 1, 2, 3, 4. No priority is GBFD-
the Abis interface when "Allow
RITY eMLPP Priority BSC6900 (Optional) the lowest. 510307
EMLPP" is set to YES and the
Emlpp flag in the Bitmap
SET information element of the Paging
EMLPPPRIO Emlpp Priority In OTHSOFTPA message received from the MSC is GBFD-
RITY Paging BSC6900 RA(Optional) 1 115001
SET
BSCABISPRI
MAP(Optional Service priority of the specified GBFD-
EMLPRI EML Priority BSC6900 ) EML 111202
SET
TZ(Mandatory MRFD-
EMONTH End month BSC6900 ) Month on which DST ends 210301
ADD
EMSIP(Mand IP address of the NE management
EMSIP EMS IP Address BSC6900 atory) system None
SET
Fallback BTSFALLBAC Whether to enable the fallback GBFD-
ENABLE Function Enable BSC6900 K(Optional) function for the BTS 510309
SET
TMA Power BTSTMA(Man Whether to enable the power GBFD-
ENABLED Supply Enabled BSC6900 datory) supply of the TMA 111202
Encryption mode used when the
SET GBFD-
NE serves as the FTP client
GCELLBASIC 113501
AUTO: indicating that the FTP
Encryption PARA(Option Encryption algorithm supported by GBFD-
client automatically selects the
ENCRY Algorithm BSC6900 al) the BSS side 113503
encryption mode
Encryption mode supported when
PLAINTEXT: indicating that the
the NE serves as the FTP server
SET plain text mode is used forcibly.
AUTO: indicating that the FTP
ENCRYMOD Transport FTPSSRV(Op ENCRYPTED: indicating that the GBFD-
client automatically selects the
E Encrypted Mode BSC6900 tional) encrypted mode is used forcibly. 111203
encryption mode
PLAINTEXT: indicating that the
SET plain text mode is used forcibly.
Whether to enable end-to-end user
ENCRYMOD The Encrypted FTPSCLT(Opt ENCRYPTED: indicating that the GBFD-
tracing for the BSC. If this
E Mode BSC6900 ional) encrypted mode is used forcibly. 111203
parameter is set to YES, the BSC
starts end-to-end user tracing after
Support End-to- SET the BSC receives the MSC Invoke
End2EndTrac end User Tracing OTHSOFTPA Trace or BSS Invoke Trace GBFD-
EXP
eState Function BSC6900 RA(Optional) message from the MSC. 116401
ALMLOG(Opti
onal)
STA
ALMLOG(Opti MRFD-
It indicates the end CIC of the A
ENDAID End Alarm ID BSC6900 onal) End number of the alarm record 210304
interface CIC segment. When
operation mode is set to OPC
BLK index, DPC group index, BSC ID,
ACIC(Mandat or CIC, the parameter is GBFD-
ENDCIC End CIC BSC6900 ory) mandatory. 111803
It indicates the end CIC of the Pb
interface CIC segment. If the
BLK search object mode is set to
PBCIC(Manda search by the specified range, the GBFD-
ENDCIC End CIC BSC6900 tory) parameter is mandatory. 111203
ADD This parameter specifies the end
If the ambient temperature reaches
BSCDSTPAD date of a period during which the
the value of this parameter, the
EndDayDSTP Prohibit Close ATE(Mandator
TRX Intelligent Shutdown feature GBFD-
heater is shut down.
A TRX End Day BSC6900 y) is disabled. 111602
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
ENDHEATTE Heater Shutdown BTSDHEUBP( the corresponding parameter in GBFD-
MP Temperature BSC6900 Optional) another mode. 111202
ADD This parameter specifies the end
BSCDSTPAD month of a period during which the
EndMonthDS Prohibit Close ATE(Mandator TRX Intelligent Shutdown feature GBFD-
TPA TRX End Month BSC6900 y) is disabled. 111602
SET
End Sub BTSFORBIDT GBFD-
ENDSUBTS Timeslot NO. BSC6900 S(Optional) Number of the end sub-timeslot 111202
This parameter specifies the time
Time When the SET for dynamically disabling the TRX
EndTimeTACl Function Is BSCDSTPA(O Intelligent Shutdown feature each GBFD-
oseTrxPA Disabled BSC6900 ptional) day. 111602
BLK
ATERE1T1(M It indicates the end CIC of the Ater GBFD-
ENDTS End TS BSC6900 andatory) interface CIC segment. 111801
It indicates the end CIC of the A
interface CIC segment. When
BLK Operation mode is set to subrack
AE1T1(Manda No., slot No., port No., or CIC, the GBFD-
ENDTS End TS BSC6900 tory) parameter is mandatory. 111803
Whether to enable the enhanced
SET concentric cell algorithm in a
BTSFORBIDT concentric cell. GBFD-
ENDTS End Timeslot NO. BSC6900 S(Mandatory) Number of the end
If a cell supports thetimeslot
enhanced 111202
concentric cell function, when an
SET overlaid-to-underlaid
Status of the scheduled handover
task. Thisor
SCHTSKSW( an underlaid-to-overlaid
parameter determines whether handover to GBFD-
ENF Status BSC6900 Mandatory) is decided,
start the the MS compares
scheduled task. the 111203
Whether to support PS downlink
receive level value respectively
MAC back pressures in GSM.
with the values of "OtoU HO
ADD When the buffer is overflowed, the
Received
If the load Levelof theThreshold" and
underlaid subcell
SUBTSK(Opti L2 transmission
Status of the rate is limited
scheduled subtask if to GBFD-
"UtoO
is greater HO Received
than Level
this threshold,
ENF Subtask Status BSC6900 onal) "User
be addedPlane DL Flow Ctrl Switch" 111203
Threshold"
certain callsinin"SET the underlaid
is "ON". Thus, the data blocks are
GCELLHOIUO"
subcell are handed to decide
over towhether
the
If
not lost. If "Userthe
all the calls in overlaid
Plane DL Flow
En Iuo Out Cell SET to triggersubcell
overlaid an enhanced to concentric
balance the
subcell
Ctrl are handed
Switch" is "OFF", over
thetoL2the
ENGOVERLD General GCELLHOIU cell handover.
traffic between the overlaid and GBFD-
underlaid
transmission subcell
rate when
is not the
limited. In
THRSH OverLoad Thred BSC6900 O(Optional) If the cell does
underlaid subcells.not support the 113201
channel
this case,seizure
the loss ratio of theblocks
of data
enhanced concentric cell function,
SET underlaid
may occur.subcell When is less Plane
"User than "En DL
the MS compares the actual
ENGSMPSDL GCELLPSOT Iuo
FlowOut CtrlCell Low Load
Switch" is set Thred",
to "ON",the
receive level value with the
MACFLOWC User Plane DL HERPARA(Op BSC
the LDR loadneeds
increases to besharply.
disabledIn this MRFD-
threshold of receive level to decide
TRL Flow Ctrl Switch BSC6900 tional) case,
through thethe
target
"SETsubcell may be
LDR" command. 211503
whether to trigger a concentric cell
congested and drop calls. To avoid
handover. In addition, when an
such a problem, the hierarchical
Enhanced ADD underlaid-to-overlaid handover is
load-based handover algorithm is
Concentric GCELL(Mand decided, the underlay cell load is GBFD-
used to hand over the calls from
ENIUO Allowed BSC6900 atory) considered. 113201
the overlaid subcell to the
underlaid cell level by level.
Load SET This parameter specifies the
Classification HO GCELLHOIU period of the handover at each GBFD-
ENLDHOPRD Period BSC6900 O(Optional) hierarchy level. 113201
Signal level step for the
Load SET hierarchical load-based handover
If the load of the underlaid subcell
Classification HO GCELLHOIU from the overlaid subcell to the GBFD-
is less than this threshold, certain
ENLDHOSTP Step BSC6900 O(Optional) underlaid subcell 113201
calls in the overlaid subcell are
handed over to the underlaid
When this parameter is set to
SET subcell to balance the traffic
"ON", if there are no available Abis
ENLOWLDTH En Iuo Out Cell GCELLHOIU between the overlaid and underlaid GBFD-
transmission resources, a high-
RSH Low Load Thred BSC6900 O(Optional) subcells. 113201
priority user can preempt the
Transmission transmission resources of a low-
Resource SET priority user. If the preemption
When this parameter is set to
ENPREEMPT Preempting BSCBASIC(O succeeds, a call drop occurs at the GBFD-
"ON", if there are no available Abis
TRANSADMT Support BSC6900 ptional) low-priority user. 118605
transmission resources, the
If the load of the underlaid subcell
BSC6900 starts the queuing
is greater than this threshold, the
Transmission SET procedure for the services to wait
period of the load-based handover
ENQUETRAN Resource BSCBASIC(O for available transmission GBFD-
from the underlaid subcell to the
SADMT Queuing Support BSC6900 ptional) resources. 118605
overlaid subcell, "UL Subcell Load
Hierarchical HO Periods", is
En Iuo Out Cell SET decreased by "MOD Step LEN of
Whether to enable the cell to
ENSOVERLD Serious GCELLHOIU Type
UL of the
Load HOM3UA local
Period" entity.
every For
second GBFD-
Type of the
centralize destination
two busy halfentity. For
rate TCHs
THRSH OverLoad Thred BSC6900 O(Optional) details
to about the ASP
accelerate and IPSP,
handover. 113201
details, seetimeslots
in different RFC4666. into one
see RFC4666.
SET M3UA_ASP:
timeslot through suggested
handover to and
use
M3UA_ASP: suggested to use
GCELLCHMG when
then tothere is a signaling
combine transfer
the two idle half
when there is a signaling transfer
ENTCHADJA Enhanced TCH BASIC(Option point (STP)inbetween
rate TCHs the otherthe local into
timeslot GBFD-
point (STP) between the local
LLOW Adjust Allowed BSC6900 al) entity
one fulland the
rate destination
TCH entity
dynamically 113402
entity and the destination entity
M3UA_IPSP: suggested to use
M3UA_IPSP: suggested to use
when there is no signaling transfer
ADD when there is no signaling transfer
point (STP) between the local
M3LE(Mandat point (STP) between the local GBFD-
entity and the destination entity
ENTITYT Local entity type BSC6900 ory) entity and the destination entity 118602
M3UA_SS7SP: suggested to use
when the destination entity is a
ADD narrowband signaling point
Destination entity M3DE(Mandat M3UA_SP: represents all types of GBFD-
Initial signal level used to compute
ENTITYT type BSC6900 ory) the destination entity 118602
the handover zone for an MS
during the hierarchical load-based
IniLev for SET handover from the underlaid
ENUTOOLOA EnUtoO Load GCELLHOIU subcell to the overlaid subcell of GBFD-
DINILEV HO BSC6900 O(Optional) the enhanced concentric cell 113201
EXP
Timer for the BSC waiting for an
End Sync Serial ALMLOG(Opti End synchronization number of the MRFD-
Establish Indication message after
ESSN No. BSC6900 onal) alarm record 210304
sending an Immediate Assignment
message. If T3101 expires before
SET the BSC receives an Establish
ESTABINDTI GCELLTMR(O Indication message, the BSS GBFD-
MER T3101 BSC6900 ptional) When thethe
releases OML is switched
seized SDCCH. to a 110502
port where the connection is
Whether to add the TA value to a
successfully established, the
Add TA to A SET complete layer-3 message to
switchover cannot be performed
ESTINDL3MS Interface EST AITFOTHPAR provide the LCS function on the A GBFD-
over a certain period of time, which
GTAFLAG IND BSC6900 A(Optional) interface 115403
is specified as ring II rotating
penalty time. In this manner,
SET frequent switchover between the
Ring II Rotating BTSRINGATT ports due to intermittent blinking GBFD-
ESTTIME Penalty Time BSC6900 R(Optional) can be avoided. 117802
SET
TZ(Mandatory MRFD-
ET EndTime BSC6900 ) End time of DST 210301
The operation time of the log GBFD-
EXP record is prior to this time. If this 111203
LOG(Optional parameter is not specified, the end MRFD-
ET End Time BSC6900 ) time is not limited. 210305
Execution mode of the commands
Time when the scheduled subtask
1. ONE_BY_ONE: indicating that
is stopped. If the time mode is set
the commands are executed one
ADD to "DAILY_T", "WEEKLY_T", or
by one according to the execution
SUBTSK(Man "MONTHLY_T", you should set this GBFD-
sequence. Only one command can
ET End Time BSC6900 datory) parameter. 111203
be executed once.
2. PARALLEL: indicating that
RUN multiple commands are executed
BATCHFILE( in parallel. Multiple commands can GBFD-
ET Execute Type BSC6900 Optional) be executed once. 111203
The operation time of the log GBFD-
COL record is prior to this time. If this 111203
LOG(Optional parameter is not specified, the end MRFD-
ET End Time BSC6900 ) time is not limited. 210305
EXP
ALMLOG(Opti End time of the alarm record. By MRFD-
ET End Time BSC6900 onal) default, the end time is 23:59:59. 210304
STA
ALMLOG(Opti End time of the alarm record. By MRFD-
End date and time of a broadcast
ET End Time BSC6900 onal) default, the end time is 23:59:59. 210304
message. This is a key parameter
for identifying a simple cell
ADD broadcast message. You can use
GSMSCB(Ma "DSP GSMSCB" to query and GBFD-
ET End Time BSC6900 ndatory) obtain the value of this parameter. 113602
GBFD-
ADD 111203
OP(Mandator End date of the user operation. MRFD-
ETD End Date BSC6900 y) Input format: YYYY&MM&DD 210305
STR
BTSLOG(Opti GBFD-
ETIME End Time BSC6900 onal) End time 111202
GBFD-
EXP Type of the log to be queried. The 111203
LOG(Optional result is displayed by the specified MRFD-
ETP Log Type BSC6900 ) type. 210305
GBFD-
ADD End time of the user operation. 111203
OP(Mandator The input format of this parameter MRFD-
ETT End Time BSC6900 y) is HH&MM&SS. 210305
SET
TZ(Mandatory MRFD-
EWEEK End week BSC6900 ) Weekday on which DST ends 210301
SET
End week TZ(Mandatory MRFD-
EWSEQ sequence BSC6900 ) Sequence of the end week of DST 210301
Upper limit of extended output
analog signal 1. If "Sensor Type of
External Analog 1" is set to
VOLTAGE, the unit of this
Upper Limit of parameter is V; if "Sensor Type of
Lower limit of extended output
Signal Output of ADD External Analog 1" is set to
analog signal 1. If "Sensor Type of
EX_ANO1_SI External Analog EMU(Optional CURRENT, the unit of this MRFD-
External Analog 1" is set to
G_MAX 1 BSC6900 ) parameter is A. 210301
VOLTAGE, the unit of this
Lower Limit of parameter is V; if "Sensor Type of
Signal Output of ADD External Analog 1" is set to
EX_ANO1_SI External Analog EMU(Optional CURRENT, the unit of this MRFD-
G_MIN 1 BSC6900 ) parameter is A. 210301
ADD
EXT2GCELL GEXT2GCEL GBFD-
NAME Cell Name BSC6900 L(Mandatory) Name of the cell 111202
ID of the cell. The cell ID cannot
ADD conflict with other cell IDs in the
EXT3GCELLI GEXT3GCEL BSC. The cells in the BSC are MRFD-
D Cell Index BSC6900 L(Mandatory) numbered sequentially. 210301
ADD
EXT3GCELL GEXT3GCEL GBFD-
NAME Cell Name BSC6900 L(Mandatory) Name of the cell 111202
ADD
EXTADJCELL BSC Adjacent EXTNCELL(M Index of the cell in the adjacent MRFD-
ID Cell Index BSC6900 andatory) Type
BSC of an extension 210301
measurement report.
There
Whetheraretothree types
support theofdownlink
extension
ADD measurement reports: type 1, type
throughput enhancement function
EXTADJCELL BSC Adjacent EXTNCELL(M 2,
Name of the3.cell in the adjacent MRFD-
of and type
the dual timeslot cell. When this
NAME Cell Name BSC6900 andatory) BSC
Type 210301
switch1:isNo matter
turned on,whether the can
the system
SET BSIC was
allocate thedecoded, the MS sends
packet downlink
Extended Cell GCELLPSOT the network
channel a measurement
of the odd number report
EXTCELLTH Throughput HERPARA(Op on the six
timeslot ofstrongest
dual timeslotTRXs. The of
bearer GBFD-
RENH Enhancement BSC6900 tional) measurement
the dual timeslot report
cell.contains the 114001
received signal level and the
decoded BSIC.
SET Type 2: The MS sends the network
Extended Switch BTSALM(Opti Whether to enable
a measurement alarm
report onextension
the six GBFD-
EXTFlag of Input Alarm BSC6900 onal) input for the BTS
strongest TRXs. For the six 111202
SET carriers, the BSIC must be GBFD-
Extension GCELLEXTM decoded
Whether the successfully and the an
network requires NCC 110801
EXTMEASOR Measurement SRPARA(Opti specified
MS to send by an
NCC_PERMITTED
extension is GBFD-
D Command BSC6900 onal) carried. The measurement
measurement report report 110802
contains the received signal level
SET GBFD-
and the decoded BSIC.
GCELLEXTM 110801
Type 3: The MS does not need to
EXTRPTPERI Extension MR SRPARA(Opti Time interval between two GBFD-
decode the BSIC for the TRXs that
OD Period BSC6900 onal) extension measurement reports 110802
the measurement report concerns.
SET The measurement report contains GBFD-
GCELLEXTM the received signal level and the 110801
Whether a cell is an extension cell.
EXTRPTTYP Extension MR SRPARA(Opti interference measurement of one GBFD-
A double-timeslot extension cell
E Type BSC6900 onal) of the concerned TRXs. 110802
regards an additional TDMA frame
as access delay extension. In
ADD theory, the supported TA value is
Cell Extension GCELL(Optio 219, that is, a time delay of about GBFD-
EXTTP Type BSC6900 nal) 120 kilometers. 114001
Interval of sending a paging
message or notification message
on the FACCH. Messages on the
FACCH are sent in the mode of
speech frame stealing. A large
number of consecutive stolen
Not Send
speech frames may affect the
Dummy Message SET Whether to send the Dummy
voice quality and even lead to no
EXTUTBFNO with Extended GCELLPSBA message during the deactivated GBFD-
voice. Therefore, the BTS must
DATA Uplink TBF BSC6900 SE(Optional) period of the extended uplink TBF 119203
control the time interval of sending
a paging or notification message GBFD-
Whether to allow sending
SET on the FACCH for the purpose of 510301
notification messages on the
FACCHRESE FACCH Msg GCELLGSMR reducing the impact on the voice GBFD-
FACCH. If the value of this
NDINT Resend Interval BSC6900 (Optional) quality. 510302
parameter is YES, an MS engaged
in a point-to-point call can receive
FACCH Send SET a notification message for a group
Whether to allow sending paging
FACCHSEND Notification Msg GCELLGSMR call. You can interrupt the existing GBFD-
messages on the FACCH. If the
NOTMSGIND Indication BSC6900 (Optional) call and join the group call. 510307
value of this parameter is YES, an
MS can receive a paging message
FACCH Send SET on the group call channel. You can
FACCHSEND Paging Msg GCELLGSMR leave the group call and respond GBFD-
PGMSGIND Indication BSC6900 (Optional) to the paging message. 510307
SET
If this parameter is set to ON, the
BSCABISPRI
BSC assigns the channels in the
TRM Factor MAP(Optional GBFD-
TRXs of the cell in a polling
FACTORSW switch BSC6900 ) Activation factor switch 111202
manner. Therefore, each TRX has
SET an even chance to be used. In this
GCELLCHMG way, the connection between the
Penalty signal level imposed on a
FACTORYMO BASIC(Option TRX and the RF can be checked GBFD-
target cell to which the handover
DE Factory Mode BSC6900 al) without manual dialing tests. 111005
fails due to congestion or poor
radio quality. This penalty helps to GBFD-
SET prevent the MS from making a 110601
FAILSIGSTR Penalty Level GCELLHOFIT second handover attempt to the GBFD-
PUNISH after HO Fail BSC6900 PEN(Optional) target cell. 510501
Continuous SET
FANADJUST adjustment FANSPEED(O MRFD-
COMMAND0 command BSC6900 ptional) Continuous speed adjustment 210301
Discrete SET
FANADJUST adjustment FANSPEED(O MRFD-
COMMAND1 command BSC6900 ptional) Discrete speed adjustment 210301
SET
FANADJUST Fan adjustment FANSPEED(O MRFD-
MODE mode BSC6900 ptional) Fan adjustment mode 210301
SET
FANSPEED( MRFD-
FANFLAG Fan Type BSC6900 Mandatory) Type of the fan 210301
SET
FANSPEEDM Speed FANSPEED( MRFD-
ODE adjustment mode BSC6900 Mandatory) After a channel request
Fan adjustment mode message 210301
is received, the type of the channel
needs to be specified. In this case,
LOD
if the threshold of the load on the
FAN(Mandato MRFD-
TCH in the current cell is smaller
FANTYPE FanBox Type BSC6900 ry) Type of the fan box 210301
than the Fast Call Setup TCH
SET Usage Threshold and the request
FASTCALLTC Fast Call Setup GCELLBASIC message is not issued during
HTHRESHOL TCH Usage PARA(Option location update or paging, a TCH GBFD-
D Threshold BSC6900 al) is preferentially assigned. 110502
Ring II function switch. The
SET parameter should be set to "YES"
FASTCNETFL BTSRINGATT when the ring II function is GBFD-
AG Configure Ring II BSC6900 R(Optional) enabled. 117802
SET
Flow control ETHPORT(Ma
FCINDEX parameter index BSC6900 ndatory) Flow control parameter index None
GBFD-
ADD 118611
Flow control PPPLNK(Opti GBFD-
FCINDEX parameter index BSC6900 onal) Flow control parameter index 118622
GBFD-
ADD 118611
Flow control MPGRP(Optio GBFD-
FCINDEX parameter index BSC6900 nal) Flow control parameter index 118622
ADD
Flow control IPLOGICPOR GBFD-
FCINDEX parameter index BSC6900 T(Optional) Flow control parameter index 118605
ADD
PORTFLOWC
Flow control TRLPARA(Ma
FCINDEX parameter index BSC6900 ndatory) Flow control parameter index None
ADD
Flow control ETHTRK(Opti MRFD-
FCINDEX parameter index BSC6900 onal) Flow control parameter index 210103
SET
BSCABISPRI
Flow control MAP(Mandato GBFD-
FCINDEX parameter index BSC6900 ry) Flow control parameter index 111202
ADD
BTSAUTOPL
Cabinet No. of AN(Mandatory GBFD-
FCN Father BTS BSC6900 ) Cabinet No. of the father BTS 510701
ADD
Cabinet No. of BTSCONNEC Cabinet No. for the port of the GBFD-
FCN Father BTS BSC6900 T(Optional) father BTS 111202
Threshold for starting RSL flow
control. If the occupancy of the
SET LAPD queue is greater than this
Flow Control GTRXFC(Opti threshold, the BSC6900 starts flow GBFD-
FCSTHD Start Threshold BSC6900 onal) control. 111705
GBFD-
ADD 118611
PPPLNK(Opti Float charging voltage. Float GBFD-
FCSTYPE CRC check mode BSC6900 onal) CRC
chargingverification mode of
compensates thePPP link. 118622
discharged capacity of the battery GBFD-
ADD so that the battery can be charged 118611
MPLNK(Optio to full voltage indefinitely. The GBFD-
FCSTYPE CRC check mode BSC6900 nal) value of this parameter
CRC verification mode of is MP
slightly
link. 118622
lower than the even charging
voltage. See the vendor
SET Input mode ofswitch.
Flow control the BAOther
lists.
specification for the setting of this
Flow control FCSW(Manda AUTO:
switches Inare
thisvalid
mode, thewhen
only system
"Flow WRFD-
parameter.
FCSW switch BSC6900 tory) fills in the
control BA1 and
switch" BA2 lists
is "ON". 040100
In multi-mode scenario, the value
according to neighboring relations
of this parameter in one mode
of cells.
SET must be the same as the value of
MANU: In this mode, you can
Float-Charging BTSAPMUBP the corresponding parameter in GBFD-
maintain the BA tables by yourself.
FCV Voltage BSC6900 (Optional) another mode. 111202
If the neighboring relations of cells
SET are changed, for example, after a
GCELLIDLEF neighboring cell is added or
FDDBA1 Input DDBA1(Mand deleted, you must maintain the GBFD-
FDDBA1TAG Tag BSC6900 atory) BA1 and BA2 lists by yourself. 114301
This parameter indicate whether to
SET generate the FDD BA2 table
GCELLHOFD automatically according to
FDDBA2 Input DBA2(Mandat neighbor cell relations or to input MRFD-
FDDBA2TAG Tag BSC6900 ory) the FDD BA2 table manually 210301
sequenced, the value of this
measurement report about a 3G
parameter be added to the receive
cell exceeds the value of this
level of the 3G cell in the
parameter, the measurement
measurement report.
report takes effect. After the valid
The values of this parameter
measurement report is filtered, the
correspond to the following decibel
3G cell joins the cell priority
values:
sequence.
SET 0: 0 dB
The values of this parameter
GCELLCCUT 1: 6 dB
correspond to the following decibel
FDDCELLOF FDD Reporting RANSYS(Opti ... GBFD-
values:
F Offset BSC6900 onal) 7: 42 dB 114301
0: 0 dB
SET 1: 6 dB
GCELLCCUT ...
FDDCELLTH FDD Reporting RANSYS(Opti 6: 36 dB GBFD-
Diversity indication of a 3G cell.
RED Threshold BSC6900 onal) 7: positive infinity 114301
This parameter indicates whether
SET the transmit diversity mode on the
Downlink
This frequency
parameter number that
specifies
GCELLIDLEF common channel in a cellone
is of
an
the MS in the
thresholds connected
of the mode
signal level
FDDDIVERSI Diversity DDBA1(Mand activated.0 means No,1 means GBFD-
retrieves
for from the 3G neighboring
TY Indication BSC6900 atory) Yes.FDD cell reselection. A FDD cell 114301
cell
can list. The numbers
be selected are sent cell
as a candidate
SET through system message
only when the receive level of the
GCELLIDLEF 2QUATER/MI. The than
FDD cell is greater valuethe
ranges
valueof
FDDDLUARF Downlink DDBA1(Mand frequency numbers
of this parameter. vary with GBFD-
AN Frequency BSC6900 atory) corresponding band reporting. 114301
The values of this
ADD parameter correspond to the
FDDECQUAL PS FDD Ec/No GEXT3GCEL following
Minimum decibel
Ec/No of values:
the 3G FDD cell GBFD-
THRSH Quality Threshold BSC6900 L(Optional) 0: -20 dB
candidate 114301
1: -6 dB
SET
2: -18 dB
GCELLCCUT Number of UTRAN FDD cells that
3: -8 dB
FDDFREQCN FDD Multirate RANSYS(Opti Offset
shouldof bethe minimum
included in threshold GBFD-
4: -16 dB
UM Reporting BSC6900 onal) for Ec/No during
measurement a FDD cell
report 114301
A 3G cell
5:-10 dB can be a candidate cell
reselection. During the cell
SET only
6:-14when
dB the average receive
reselection from a GSM cell to a
GCELLCCUT level
7: -12ofdB
the 3G cell is greater than
FDD cell, the Ec/No of the target
RANSYS(Opti the
Thisvalue of thisisparameter
parameter valid onlyof the
when GBFD-
cell to be reselected must be
FDDQMIN FDD Qmin BSC6900 onal) current
FDD REP serving
QUANT cell.is set to EcN0. 114301
greater than or equal to the value
The values of this parameter
SET obtained by subtracting FDD Qmin
correspond to the following decibel
GCELLCCUT Offset from FDD Qmin. This
values:
FDDQMINOF RANSYS(Opti parameter is valid only when FDD GBFD-
0: - (always select a cell if
FSET FDD Qmin Offset BSC6900 onal) REP QUANT
Minimum levelisthreshold
set to EcN0.of UTRAN 114301
acceptable)
SET cell reselection.
1: -28 dB During the cell
GCELLCCUT reselection
2: -24 dB decision from a GSM
RANSYS(Opti cell
... to a FDD cell, this parameter is GBFD-
This parameter specifies whether
FDDQOFF FDD Q Offset BSC6900 onal) used
15: 28todBcalculate the RSCP 114301
Ec/No or RSCP is used for the
threshold of the target cell. The
SET measurement report on a FDD
values of this parameter
GCELLCCUT cell. Ec/No stands for the signal-
correspond to the following decibel
FDD REP RANSYS(Opti to-noise ratio. RSCP stands for the GBFD-
values: 0 = -114 dBm,
FDDREP QUANT BSC6900 onal) received signal code power. 114301
1 = -112 dBm,
SET 2 = -110 dBm,
GCELLCCUT ...
FDDRSCPMI RANSYS(Opti 14 = -86 dBm, GBFD-
N FDD RSCP Min. BSC6900 onal) 15 = -84 dBm. 114301
ADD
FDDRSCPQU PS FDD RSCP GEXT3GCEL Minimum RSCP of the 3G FDD cell GBFD-
ALTHRSH Quality Threshold BSC6900 L(Optional) candidate 114301
spreading. Therefore, the
bandwidth of a signal is not
changed. Instead, signals from
different sources are differentiated.
Scrambling prevents multiple
transmitters from using the same
code word for spreading.
SET On the uplink, the scrambling
GCELLIDLEF function is used for differentiating
FDDSCRAMB DDBA1(Mand MSs. On the downlink, the function GBFD-
LE Scrambling Code BSC6900 atory) is used for differentiating cells. 114301
Number of CPU usage sampling
SET If the FER
times carried
for fast in the The value
judgment.
Fast judgement FCCPUTHD( measurement
of this parameter report
must (MR)
be ofreceived
half WRFD-
FDWINDOW window BSC6900 Optional) is
sizelower than or
of "Filter equal to
window" or"FER
smaller. 040100
threshold 1", the value of "FER 0
Whether the BTS reports the frame
and Quality Level N" is
SET erase ratio in a measurement
incremented by one. If the FER in
FER Report GCELLSOFT( report or preprocessed GBFD-
the MR received is greater than
FERRPTEN Enable BSC6900 Optional) measurement report 116801
"FER threshold 1" but meanwhile
lower than or equal to "FER
SET threshold 2", the value of "FER 1
GCELLOTHE and Quality Level N" is GBFD-
If the FER carried in the MR
FERSTATTH1 FER Threshold 1 BSC6900 XT(Optional) incremented by one. 116801
received is greater than "FER
threshold 2" but meanwhile lower
SET than "FER threshold 3", the value
GCELLOTHE of "FER 2 and Quality Level N" is GBFD-
If the FER carried in the MR
FERSTATTH2 FER Threshold 2 BSC6900 XT(Optional) incremented by one. 116801
received is greater than "FER
threshold 3" but meanwhile lower
SET than "FER threshold
This parameter 4", the
specifies thevalue
GCELLOTHE of "FER 3 and
frequency Quality
hopping mode Level
of aN"cell.
is GBFD-
If the FER carried in the MR
FERSTATTH3 FER Threshold 3 BSC6900 XT(Optional) incremented
When this by one. is set to
parameter 116801
received is greater than "FER
"NO_FH",
threshold 4" allbut
themeanwhile
TRXs of the cell
lower
SET do
than not
"FERjoin threshold
in frequency 5", hopping.
the value
GCELLOTHE When
of "FER this parameter
4 and QualityisLevel
set toN" is GBFD-
If the FER carriedthe
"BaseBand_FH", in the
cellMR
is in
FERSTATTH4 FER Threshold 4 BSC6900 XT(Optional) incremented by one. 116801
received
basebandisfrequency
greater than "FER
hopping
threshold
mode. In this 5" but meanwhile
case, there can lower
be
SET than "FER threshold 6",
TRXs that do not join in frequency the value
GCELLOTHE of "FER 5onand
hopping theQuality
cell. Levelthis
N" is GBFD-
If the FER carried in When
the MR
FERSTATTH5 FER Threshold 5 BSC6900 XT(Optional) incremented
parameter by one. 116801
received is isgreater
set to than
"RF_FH",
"FERthe
cell is in RF
threshold 6" frequency
but meanwhilehoppinglower
SET mode.
than "FER In this case, there
threshold canvalue
7", the be
GCELLOTHE TRXs
of "FER that do not
6 and join inLevel
Quality frequency
N" is GBFD-
FERSTATTH6 FER Threshold 6 BSC6900 XT(Optional) hopping
incremented on the
by cell.
one.When this 116801
If the FER carried in the MR
parameter is set to "Hybrid_FH",
received is greater than "FER
the cell is in hybrid frequency
SET threshold 7", the value of "FER 7
SET hopping. In this case, some TRXs
GCELLOTHE and Quality Level N" is GBFD-
GCELLHOPT on the cell must join in baseband
FERSTATTH7 FER Threshold 7 BSC6900 XT(Optional) incremented by one. 116801
P(Optional) frequency hopping, some cells on
SET the cell must join in RF frequency
The file name cannot contain the
GCELLHOPQ hopping, and some cells on the
path and suffix. The suffix is
Frequency UICKSETUP( cell must not join in frequency GBFD-
automatically added. The file name
FHMODE Hopping Mode BSC6900 Mandatory) hopping. 113701
is composed of English letters,
numerals, and common symbols, GBFD-
EXP and the characters (@, #, !, %, ^, 111203
LOG(Optional &, *, [, ], /, \, ', and ") cannot MRFD-
FILE File Name BSC6900 ) appear in the file name. 210305
Path to save the exported file. The
path must be a valid path on the
OMU server. If the OMU runs the
LINUX system, the input path must GBFD-
ZIP start with the symbol "/" or "\", for 111203
FILE(Mandato example, "/mml". If the OMU runs MRFD-
Name of the backup file. The file
FILE Target File Path BSC6900 ry) the
PathWINDOWS
of the targetsystem,
file the input 210401
name is composed of English
path can be a full path (for
letters, numerals, and common GBFD-
example, "D:\mml") or a relative
BKP symbols, and the characters (@, #, 111203
EXP path (for example, "/mml"). If the
LOGDB(Optio !, %, ^, &, *, [, ], /, \, ', and ") cannot MRFD-
CFGMML(Opt relative path is used, the root
FileName File Name BSC6900 nal) appear in the file name. 210305
ional) directory is same as that of the
EXP OMU installation directory. That is,
GCELLTEMP if the OMU software is installed in
LATE(Optiona disk D, the exported file is saved in MRFD-
FILEPATH Export File Path BSC6900 l) "D:/mml". 210301
GBFD-
Maximum number of former values
EXP 111203
when the receive level of the
ALMLOG(Opti Type of the alarm log file to be MRFD-
serving cell or the receive level of
FILETYPE Log File Type BSC6900 onal) exported 210304
the neighbor cell is filtered. The
greater the value, the greater the
Execution result.
SET weight of the former receive levels;
If you select "FALSE", only the
FILTERWNDS Filter Window GCELLNC2P otherwise, the greater the weight GBFD-
records of failed operations are
IZE Size BSC6900 ARA(Optional) of the later receive levels. 116201
displayed. If you select "TRUE",
only the records of successful GBFD-
EXP operations are displayed. If this 111203
LOG(Optional parameter is not specified, all the MRFD-
FIN Final BSC6900 ) records are displayed. 210305
Whether to enable 0.2 dB downlink
Whether to start the fire-
SET power control. This power control
extinguishing equipment of the
FINESTEPPC 0.2dB Power GCELLPWR3 function improves the power GBFD-
BTS.
ALLOWED Control Enable BSC6900 (Optional) This parameter
control specifies the static
precision. 117601
In multi-mode scenario, the value
Abis resource load threshold. If the
of this parameter in this mode
static Abis resource load is less
Fire- SET must be the same as the value of
than the static Abis resource load
extinguishing BTSOUTPUT( the corresponding parameter in GBFD-
threshold, the TCHF is
FIRESET Equipment BSC6900 Optional) Time
anotherthreshold
mode. for delaying the 111202
preferentially allocated. Otherwise,
report of a clear alarm. If the alarm
SET whether the TCHF or the TCHH
recurs within the time specified by
FIXABISPRIO Fix Abis Prior BTSFLEXABI should be preferentially allocated
this parameter after it is cleared,
RABISLOADT Choose Load SPARA(Optio is determined by the dynamic Abis GBFD-
the clear alarm is not reported.
HRED Thred BSC6900 nal) resource load. 117301
Otherwise, the clear alarm is
Time threshold for delaying the
SET reported. If this parameter is set to
report of an alarm. If the alarm is
BTSALMFLA 0, the clear alarm is reported
cleared within the time specified by
FlashAlmClrT Flash Alarm SHTHD(Optio immediately when the alarm is MRFD-
this parameter, the alarm is not
hd Clear Threshold BSC6900 nal) cleared. 210304
reported. Otherwise, the alarm is
SET reported. If this parameter is set to
BTSALMFLA 0, the alarm is reported
FlashAlmOcc Flash Alarm SHTHD(Optio immediately when the alarm MRFD-
Whether to enable the filtering of
urThd Occur Threshold BSC6900 nal) occurs. 210304
the intermittent alarms. If the value
SET of this parameter is "DISABLE",
BTSALMFLA "Flash Statis Alarm Raise Time
Flash Filter SHTW(Option Window" and "Flash Statis Alarm MRFD-
FlashFilterEn Enable BSC6900 al) Clear Time" are invalid. 210304
for the BTS. If this parameter is set
to FIX_16K_ABIS, the BSC6900
assigns a fixed Abis transmission
timeslot to a TCH. If this parameter
is set to FLEX_ABIS, the BSC6900
assigns
Time windowan Abis fortransmission
observing the
timeslot
clearance dynamically to a TCH
of the intermittent
SET (except
alarms. In thethis
static
timePDCH)
window,to the
Flash Statistic BTSALMFLA increase the resource
BTS statistical alarm isutilization.
cleared if If
Time window for observing the
FlashStatisAl Alarm Clear Time SHTW(Option this parameter isofset
the occurrence thetointermittent MRFD-
intermittent alarms generated
mClrTW Window BSC6900 al) SEMI_ABIS,
alarm meets the relatedBTS to threshold.
which a 210304
during the statistical period. In this
TCH belongs assigns a fixed Abis
SET Whether
time window, to enable
the BTS the statistical
function of
transmission timeslot to the TCH
Flash Statistic BTSALMFLA Flex
alarmmobile allocation
is reported if theindex offset
occurrence
while the upper-level BTS set to
FlashStatisAl Alarm Raise SHTW(Option (MAIO). In the tightalarm
of the intermittent frequency
meets the MRFD-
FLEX_ABIS assigns an Abis
mOccurTW Time Window BSC6900 al) reuse
relatedcase of the GSM system,
threshold. 210304
transmission timeslot dynamically
adjacent-channel interference and
to the TCH. This mode applies
co-channel interference easily
where old and new BTSs are
occur between channels. If the
FLEXABISMO ADD cascaded. HDLC and IP BTS is GBFD-
frequency hopping function and
DE Flex Abis Mode BSC6900 BTS(Optional) not support this parameter. 117301
the Flex MAIO function are
enabled in a cell, adjacent-channel
Whether to enable the function of
ADD or co-channel interference
the Flex training sequence code
Start Flex MAIO GCELL(Optio between channels can be reduced GBFD-
(TSC). If the value of this
FLEXMAIO Switch BSC6900 nal) partially. 117001
parameter is ON and the BTS
supports the Flex TSC function, GBFD-
SET the BSS dynamically allocates 113521
FLEXTSCSWI GCELLSOFT( TSCs to hopping frequencies for GBFD-
TCH Flex TSC Switch BSC6900 Optional) improving the security of calls. 118201
SET
Flux BSCPSSOFT
FlowCountPer Measurement PARA(Option Period of collecting the traffic GBFD-
Fast flux measurement period. The
iodTicks Period BSC6900 al) statistics 119501
ratio of the uplink flux to the
SET downlink flux is calculated at the
FLOWCOUN Fast Flux BSCPSSOFT interval specified by this parameter
TPERIODTS Measurement PARA(Option to determine the current service GBFD-
RAPIDADJ Period BSC6900 al) priority type. 119501
SET
FLOWCTRLS Flow control ETHPORT(Op
WITCH switch BSC6900 tional) Port flow control switch None
GBFD-
ADD 118611
FLOWCTRLS Flow control PPPLNK(Opti GBFD-
WITCH switch BSC6900 onal) Link flow control switch 118622
GBFD-
ADD 118611
FLOWCTRLS Flow control MPGRP(Optio GBFD-
WITCH switch BSC6900 nal) Link flow control switch 118622
GBFD-
ADD 118605
FLOWCTRLS Flow control IPLOGICPOR MRFD-
WITCH switch BSC6900 T(Optional) Logical port flow control switch 211503
ADD
FLOWCTRLS Flow control ETHTRK(Opti MRFD-
WITCH switch BSC6900 onal) Port flow control switch 210103
filter for determining whether the
A3 x C(nt-2t) + ... + A8 x C(nt-7t)
received signal level drops rapidly.
One
If C1(nt)of the nine than
is less parameters
B and C(nt) (filteris
The computation formula is as
parameters
less than theA1 to A8 and
threshold forfilter
edge
follows:
parameter
handover, the B) used
signaltolevel configure
is the
C1(nt) = A1 x C(nt) + A2 x C(nt-t) +
filter for determining
considered dropping whether rapidly. the
A3 x C(nt-2t) + ... + A8 x C(nt-7t)
received
In signalA1
theofformula, levelto A8drops arerapidly.
filter
One
If C1(nt) the nine than
is less parameters
B and C(nt) (filteris
The computation
parameters A1 to formula
A8 minus is 10as and
SET parameters
less than theA1 to A8 and
threshold forfilter
edge
follows:
B is the negative of filter parameter
BSCABISPRI parameter
handover, the B) used
signaltolevel configure
is the
C1(nt)
B. C(nt) = indicates
A1 x C(nt)the + A2 x C(nt-t) +
received
FLOWCTRLS Flow control MAP(Optional filter for determining
considered dropping whether rapidly. the GBFD-
A3
signalx C(nt-2t)
level in+the ... + A8 x C(nt-7t)
uplink
WITCH switch BSC6900 ) received
In
Specified signal
theofformula, A1levelto drops
A8 rapidly.
areswitch
filter
One
If C1(nt)
measurement theisport
less flow
ninereportthan control
parameters
Bofand (filteris
theisC(nt)
serving
111202
The computation
parameters A1 to formula
A8 minus as and
10
parameters
less
cell than theA1
received to
threshold
at timeA8 nt.and forfilter
edge
follows:
B is the negative of tofilter parameter
SET parameter
handover,
Setting B) used
the signal configure
level is the
C1(nt)
B. C(nt) =theA1filter
x C(nt)
indicates
helps
the+ A2 to xconfigure
received C(nt-t) +
Filter Parameter GCELLHOEM filter for
considered
the determining
dropping whether
rapidly. the
A3
signalxmaximum
C(nt-2t)
level
allowed
in+the ... + A8signal
uplink x C(nt-7t) level GBFD-
FLTPARAA1 A1 BSC6900 G(Optional) received
In
drop theof
degree. signal
formula, A1levelto A8drops arerapidly.
filter 110601
One
If C1(nt)
measurement theis nine
less parameters
than
report B and (filter
C(nt)
of theisserving is
The computation
parameters A1 to formula
A8 minus as and
10
parameters
less
cell than the A1 to
threshold
received at time nt. A8 and forfilter
edge
follows:
B is the negative of tofilter parameter
SET parameter
handover,
Setting B) used
the signal configure
level is the
C1(nt)
B. C(nt) =theA1filter
x C(nt)
indicates
helps
the+ A2 to xconfigure
received C(nt-t) +
Filter Parameter GCELLHOEM filter
the for determining
considered
maximum dropping
allowed whether
rapidly.
signal the
level GBFD-
A3
signalx C(nt-2t)
level in+the ... + A8 x C(nt-7t)
uplink
FLTPARAA2 A2 BSC6900 G(Optional) received
In
drop theof
degree. signal
formula, A1levelto A8drops arerapidly.
filter 110601
One
If C1(nt)
measurement the ninereport
is less parameters
than Bofand (filteris
theisC(nt)
serving
The computation
parameters A1 to formula
A8 minus as and
10
parameters
less
cell than the at
received A1 to
threshold
timeA8 and
nt. filter
for edge
follows:
B is the negative of tofilter parameter
SET parameter
handover,
Setting B) used
the signal configure
level is the
C1(nt)
B. C(nt) =theA1filter
x C(nt)
indicates
helps
the+ A2 to xconfigure
received C(nt-t) +
Filter Parameter GCELLHOEM filter for
considered
the determining
dropping whether
rapidly. the
A3
signalxmaximum
Maximum C(nt-2t)
level
allowed
in+the
transmit ... + A8signal
uplink
power x C(nt-7t)
level
level
of
GBFD-
FLTPARAA3 A3 BSC6900 G(Optional) received
In
drop theof
degree. signal
formula, A1levelto drops
A8 are rapidly.
filter 110601
One
If C1(nt)
measurement
MSs. As theis
one nine
less of parameters
than
report
the Bof
cell and
the (filter
C(nt)
serving
reselection is
The computation
parameters A1 to formula
A8 minus is 10as and
parameters
less
cell than
received
parameters the A1 at to
threshold
time
in system A8 and
nt. forfilter
message edge 3,
follows:
B is the negative of tofilter parameter
SET parameter
handover,
Setting
this the
parameter B)
the used
signal
filter is helps
used configure
level
to
to is
configure
control the
C1(nt)
B. C(nt) = A1 x C(nt)
indicates thewhether + A2
receivedthe +
x C(nt-t)
Filter Parameter GCELLHOEM filter
the for determining
considered dropping rapidly.
the
A3
signalxmaximum
transmit
C(nt-2t)
level in +allowed
power
the... + of
A8MSs.
uplink
signal For
x C(nt-7t) level GBFD-
FLTPARAA4 A4 BSC6900 G(Optional) received
In
drop thedegree.
details, seesignal
formula, GSM A1levelto A8
Rec. drops arerapidly.
05.05. filter 110601
If C1(nt) is lessreport
measurement than B ofandtheisC(nt)
serving is
The
In computation
parameters
a received
GSM900 A1cell,to formula
A8
the minus
maximum as and
10
less
cell than the at threshold
time nt. for edge
follows:
B is thecontrol
power negative level of offilter
an parameter
MS
SET handover,
Setting the the signal
filter helps level is
to xconfigure
C1(nt)
B. C(nt)
ranges = A1 x
indicates
from 0 C(nt)
to the
19, + A2
received C(nt-t) +
corresponding
Filter Parameter GCELLHOEM considered
the maximum dropping
allowed rapidly.
signal level GBFD-
A3
signalx C(nt-2t)
level
respectively in +the
to A1...
the to+ A8
uplink x
following C(nt-7t)
values
FLTPARAA5 A5 BSC6900 G(Optional) In
drop thedegree.
formula, A8 are filter 110601
If C1(nt)
measurement
(unit: is
dBm): A1 less than
43,report B and
of the C(nt)
37, serving is
parameters to41,A839, minus 35,
10 and33,
less
cell
31, than
received the threshold
at time nt. for edge
B is29, the27, 25, 23,of21,
negative 19,parameter
filter 17, 15,
SET handover,
Setting
13, 11, 9,the7, the signal
filter
and helps level is
to configure
5.Generally,
B. C(nt) indicates the receivedthe
Filter Parameter GCELLHOEM considered
the
maximummaximum dropping
allowed rapidly.
signal level GBFD-
signal leveltransmit in the uplink power
FLTPARAA6 A6 BSC6900 G(Optional) In
drop the
supported formula,
degree. by an A1 to
MS is A8 are filter 110601
measurement report of level 5
the serving
parameters
(corresponding A1 to to A8
33 minus
dBm). 10
Theand
cell received at time nt.
B is the negative ofpower
minimum filter parameter
SET Setting thetransmit filter helps to configure
B. C(nt)
supported indicates
by an MS isreceived
the level 19
Filter Parameter GCELLHOEM the maximum allowed signal level GBFD-
signal level
(corresponding in the uplink
FLTPARAA7 A7 BSC6900 G(Optional) drop degree. to 5 dBm). Other 110601
measurement
transmit report
levelsofare thereserved
serving
Trend of power the received signal level
cell
for received atMSs.
high-power time nt.
of the cell during a period. This
SET Setting
In the filterorhelps
a GSM1800 to configure
parameter helps toGSM1900 configurecell, the
Filter Parameter GCELLHOEM the
the maximum allowed signallevel level GBFD-
filtermaximum
for determining power whether control the
FLTPARAA8 A8 BSC6900 G(Optional) drop
of an degree.
MS signal
rangeslevel fromdrops 0 to 31, 110601
received rapidly.
corresponding
If this parameter respectively
is higher, atomore the
SET following
rapid signal valueslevel(unit:
drop dBm):is required 30,
Filter Parameter GCELLHOEM 28, 26, 24,
to trigger the 22, 20, 18, 16,
handover due14, to 12, GBFD-
This parameter determines
FLTPARAB B BSC6900 G(Optional) 10,
rapid 8,signal
6, 4, 2,level 0, 0,drop.0, 0, 0, 0, 0, 0, 110601
whether the BSC transfers the LLC
0, 0, 0, 0, 0, 0, 36, 34, and 32.
SET PDUs in the buffer to the target cell
Generally, the maximum transmit
FLUSHTRAN BSCPSSOFT or discards these LLC PDUs in the
power supported by an MS is level
SFERSWITC FLUSH-LL PDU PARA(Option buffer when receiving the FLUSH- GBFD-
0 (corresponding to 30 dBm). The
H Transfer Switch BSC6900 al) LL message from the SGSN. 114101
minimum transmit power
supported by an MS is level 15
SET (corresponding to 0 dBm). Other
FMSMAXOP MS_TXPWR_MA GCELLCCCH transmit power levels are reserved GBFD-
CC X_CCH BSC6900 (Optional) for high-power MSs. 111003
SET
BTSFMUABP( GBFD-
FMUTYPE FMU Board Type BSC6900 Optional) Type of the FMUA board 111202
EXP
ELABEL(Opti MRFD-
DLD
FN File Name BSC6900 onal) Name of the electronic label file 210301
LICENSE(Ma
ndatory) GBFD-
ULD 111203
LICENSE(Ma MRFD-
FN File Name BSC6900 ndatory) Name of the file 210401
EXP
CFGMML(Opt
EXP
ional)
DEVFILE(Opti
DLD GBFD-
BKP
FN File Name BSC6900 onal)
RETANTCFG( Name of the file 111203
DB(Optional)
Mandatory)
EXP Name of the file. The following
EXP
GCELLTEMP special characters are not allowed
BTSDEVFILE(
LATE(Optiona in the file name: \, /, :, *, ?, ", <, >, MRFD-
FN File Name BSC6900 Optional)
l) and |. 210301
LOD
RETANTCFG(
CHK Name of the specified file. By
Mandatory)
DATA2LIC(Op default, the file is in the OMU MRFD-
ULD
FN File Name BSC6900 tional) active-area path \ftp\license folder. 210403
BTSLOG(Man
datory)
DLD
Name of the software to be
BTSSW(Mand Name of the software to be GBFD-
downloaded.The file name must be
FN File Name BSC6900 atory) Switch specifying whether to allow
downloaded 111202
with the extension of *.zip.If you do
the downlink EGPRS TBF and the
not enter the file name, all the valid
uplink GPRS TBF to share the
DLD files in the directory are
same channel. On: allow the
BTSPATCH(O Length of the These
downloaded. timer for determining
valid files are GBFD-
downlink EGPRS TBF and the
FN File Name BSC6900 ptional) the intermittent
extracted disconnection
from the patch package.of 111202
uplink GPRS TBF to share the
the SS7 link to the DPC. When the
SET same channel; Off: prohibit the
time of SS7 link disconnection
BSCPSSOFT downlink EGPRS TBF and the
exceeds the period specified by
FORBIDEDG Allow E Down G PARA(Option uplink GPRS TBF sharing the GBFD-
the timer, the BSC performs
U Up Switch BSC6900 al) same channel. 114201
corresponding operations,
including clearing the calls carried
Anti DPC ADD on the disconnected link.
FORBIDNO7 Intermittent GCNNODE(O Otherwise, the system does not GBFD-
FLASHDISC Disconnect Timer BSC6900 ptional) perform any operation. 111804
SET
Force_Limit_T TCPARA(Opti Time limit for restraining the noise GBFD-
ime Force Limit Time BSC6900 onal) level 115601
SET
BSCPSSOFT
Force MS Two- PARA(Option Whether the forced phase-2 GBFD-
Force2Phase phase Access BSC6900 al) access is allowed for the MSs 114101
Whether to forcibly enable the EFR
function. When this parameter is
set to YES, if both the MS and the
BSC6900 support the enhanced
full rate (EFR), the BSC6900
FORCEDCEL SET forcibly enables the EFR function
LEFRSWITC Allow Forced GCELLSOFT( even if the MSC does not support GBFD-
H EFR in Cell BSC6900 Optional) the function. 110501
Whether an MS is forced to send a
Handover Access message, which GBFD-
Force MS to SET is indicated by an information 110601
FORCEMSAC Send Ho Access GCELLSOFT( element in the handover GBFD-
CESS SWITCH BSC6900 Optional) command. 510501
ADD
BTSAUTOPL
Dest Father BTS AN(Mandatory Port No. of the father BTS GBFD-
FPN Port No. BSC6900 ) connected with the BTS 111202
Maximum time of delay for
multiplexing. This parameter is
ADD
used for the system to send the
Dest Father BTS BTSCONNEC Number of the port for the GBFD-
multiplexed data. If the time for
FPN Port No. BSC6900 T(Mandatory) destination father BTS 111202
buffering the data exceeds this
value, the system does not wait for GBFD-
ADD the multiplexing of other packets. 118604
Maximum Delay IPMUX(Option In this way, the overlong delay can GBFD-
FPTIMER Time[ms] BSC6900 al) be prevented. 118610
SET
BTSAUTOPL Whether to generate the frequency
FQBSICOPT Freq. and BSIC ANCFG(Optio and BSIC by using the automatic GBFD-
SWITCH Optimize Switch BSC6900 nal) optimization algorithm 510701
If this switch is on, it indicates that
SET Frame
the offset. The
frequency and frame
BSIC areoffset
BTSAUTOPL technology arranges the frame
generated automatically. If this
FQBSICSWIT Freq. and BSIC ANCFG(Optio numbers of different
switch is off, cellsthat
it indicates under
the GBFD-
CH Plan Switch BSC6900 nal) the
datasame
mustBTS to be different
be configured from
manually. 510701
If
onethisanother
switch byis on,
oneitframe
indicates that
offset.
SET the frequency and BSIC
Thus, the FCH and SCH signals of are
BTSAUTOPL generated
neighboringautomatically. If this in
cells do not appear
FQBSICSWIT Freq. and BSIC ANCFG(Optio switch
the same is off, it indicates
frame, which isthat the
helpful GBFD-
CH1 Plan Switch BSC6900 nal) data must be configured
for the coding of an MS. If the manually. 510701
value of this parameter is 0, the GBFD-
ADD cell is not offset.
MP segment If thelength
size,the value of is 255, 118611
SET
MPGRP(Optio this
packetparameter
should be is not sent.
bigger orIfequel
the GBFD-
BTSEXCURSI
FRAGSIZE MP flake size BSC6900 nal) parameter
with it. is set to a value except 118622
ON(Mandator
for 0 and 255, the handover of the
y)
cell must be changed from the
SET
synchronous mode to the
FRAMEOFFS Frame Offset BSCSYNCOF GBFD-
asynchronous mode. For
ET [Frame No.] BSC6900 F(Mandatory) Whether
Frame offsetthe downlink
of the BTS clock 118201
BTS3001C, BTS3X, BTS3002C,
discontinuous transmission (DTX)
and double-transceiver BTSs, the
function is enabled for full rate
SET frame offset can be predicted
(FR) calls. This function is also
FRAMEOFFS GCELLOTHE according to the value of this MRFD-
restricted by the DTX switch in the
ET Frame Offset BSC6900 XT(Optional) parameter. 210301
MSC. If the MSC allows the
SET downlink DTX for calls and the
GCELLBASIC value of this parameter(FRDLDTX)
FR Use Downlink PARA(Option is YES, the downlink DTX is GBFD-
FRDLDTX DTX BSC6900 al) enabled for FR calls of cells. 114801
in the day. The default execution
interval is one month.
7. MONTHLY_C: When this
parameter is set to
"MONTHLY_C", the command is
executed every month. You can set
Time mode used when the log is
the day in which the command is
exported. "ONTIME" indicates the GBFD-
executed. You can also set the
EXP time between two exact time. 111203
start time and end time in the day
LOG(Mandato "RELATIVE_T" indicates the time MRFD-
in which the command is executed,
FREQ Time Mode BSC6900 ry) before the current time. 210305
and set the time interval for
executing the command in the day.
ADD The default execution interval is
SUBTSK(Man one month and the default time GBFD-
FREQ Time Mode BSC6900 datory) interval is 30 minutes. 111203
ADD
GTRX(Mandat GBFD-
ADD
FREQ Frequency BSC6900 ory) Frequency of the TRX 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ1 Frequency 1 BSC6900 P(Optional) Frequency 1 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ10 Frequency 10 BSC6900 P(Optional) Frequency 10 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ11 Frequency 11 BSC6900 P(Optional) Frequency 11 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ12 Frequency 12 BSC6900 P(Optional) Frequency 12 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ13 Frequency 13 BSC6900 P(Optional) Frequency 13 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ14 Frequency 14 BSC6900 P(Optional) Frequency 14 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ15 Frequency 15 BSC6900 P(Optional) Frequency 15 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ16 Frequency 16 BSC6900 P(Optional) Frequency 16 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
FREQ17 Frequency 17 BSC6900 P(Optional) Frequency 17 110101
ADD
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ18 Frequency 18 BSC6900 P(Optional) Frequency 18 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ19 Frequency 19 BSC6900 P(Optional) Frequency 19 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ2 Frequency 2 BSC6900 P(Optional) Frequency 2 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ20 Frequency 20 BSC6900 P(Optional) Frequency 20 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ21 Frequency 21 BSC6900 P(Optional) Frequency 21 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ22 Frequency 22 BSC6900 P(Optional) Frequency 22 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ23 Frequency 23 BSC6900 P(Optional) Frequency 23 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ24 Frequency 24 BSC6900 P(Optional) Frequency 24 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ25 Frequency 25 BSC6900 P(Optional) Frequency 25 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ26 Frequency 26 BSC6900 P(Optional) Frequency 26 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ27 Frequency 27 BSC6900 P(Optional) Frequency 27 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
FREQ28 Frequency 28 BSC6900 P(Optional) Frequency 28 110101
ADD
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ29 Frequency 29 BSC6900 P(Optional) Frequency 29 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ3 Frequency 3 BSC6900 P(Optional) Frequency 3 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ30 Frequency 30 BSC6900 P(Optional) Frequency 30 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ31 Frequency 31 BSC6900 P(Optional) Frequency 31 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ32 Frequency 32 BSC6900 P(Optional) Frequency 32 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ33 Frequency 33 BSC6900 P(Optional) Frequency 33 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ34 Frequency 34 BSC6900 P(Optional) Frequency 34 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ35 Frequency 35 BSC6900 P(Optional) Frequency 35 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ36 Frequency 36 BSC6900 P(Optional) Frequency 36 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ37 Frequency 37 BSC6900 P(Optional) Frequency 37 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ38 Frequency 38 BSC6900 P(Optional) Frequency 38 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
FREQ39 Frequency 39 BSC6900 P(Optional) Frequency 39 110101
ADD
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ4 Frequency 4 BSC6900 P(Optional) Frequency 4 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ40 Frequency 40 BSC6900 P(Optional) Frequency 40 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ41 Frequency 41 BSC6900 P(Optional) Frequency 41 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ42 Frequency 42 BSC6900 P(Optional) Frequency 42 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ43 Frequency 43 BSC6900 P(Optional) Frequency 43 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ44 Frequency 44 BSC6900 P(Optional) Frequency 44 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ45 Frequency 45 BSC6900 P(Optional) Frequency 45 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ46 Frequency 46 BSC6900 P(Optional) Frequency 46 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ47 Frequency 47 BSC6900 P(Optional) Frequency 47 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ48 Frequency 48 BSC6900 P(Optional) Frequency 48 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ49 Frequency 49 BSC6900 P(Optional) Frequency 49 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
FREQ5 Frequency 5 BSC6900 P(Optional) Frequency 5 110101
ADD
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ50 Frequency 50 BSC6900 P(Optional) Frequency 50 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ51 Frequency 51 BSC6900 P(Optional) Frequency 51 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ52 Frequency 52 BSC6900 P(Optional) Frequency 52 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ53 Frequency 53 BSC6900 P(Optional) Frequency 53 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ54 Frequency 54 BSC6900 P(Optional) Frequency 54 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ55 Frequency 55 BSC6900 P(Optional) Frequency 55 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ56 Frequency 56 BSC6900 P(Optional) Frequency 56 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ57 Frequency 57 BSC6900 P(Optional) Frequency 57 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ58 Frequency 58 BSC6900 P(Optional) Frequency 58 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ59 Frequency 59 BSC6900 P(Optional) Frequency 59 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ6 Frequency 6 BSC6900 P(Optional) Frequency 6 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
FREQ60 Frequency 60 BSC6900 P(Optional) Frequency 60 110101
ADD
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ61 Frequency 61 BSC6900 P(Optional) Frequency 61 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ62 Frequency 62 BSC6900 P(Optional) Frequency 62 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ63 Frequency 63 BSC6900 P(Optional) Frequency 63 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ64 Frequency 64 BSC6900 P(Optional) Frequency 64 110101
GCELLFREQ(
Optional)
ADD
GCELLMAGR GBFD-
ADD
FREQ7 Frequency 7 BSC6900 P(Optional) Frequency 7 110101
GCELLFREQ(
Optional)
ADD Frequency correction parameter.
GCELLMAGR Used for the fast-moving handover GBFD-
ADD
FREQ8 Frequency 8 BSC6900 P(Optional) Whether
Frequency to 8enable the automatic 110101
GCELLFREQ( algorithm, the value of this
frequency
Threshold correction algorithm.
Optional) parameter for must loadbesharing
translated in the
into
This
900 parameter
MHznumber.
frequencyis used for the fast-
ADD a binary Theband.
valueAssume
moving
that an MS handover
supports algorithm. Ifsub- the
GCELLMAGR consists of 16 bit. Themultiple
most GBFD-
Frequency
parameter band
is set types
to YES, of the
the BTS
board
FREQ9 Frequency 9 BSC6900 P(Optional) bands
Frequency in the
significant 9 900
bit MHz frequency
indicates whether the 110101
This parameter
calculates is only applicable
band.
parameterIf thethe
iscell
speed
load
valid.
atequal
is
Bits
which an
14 to 8to or
to
MS the
leaves or approaches it, and
less thanthe
indicate thislevel
threshold,
threshold.the Bits
BSC7
SET DDPU/DFCU/DFCB/DCOM/DDPM
sends theconsider
BSC6900
does not
to 0 indicate thethe
the threshold
calculated
priority
of the
Frequency Adjust GCELLOTHE /DCBM.
speed in the
an uplink measurement GBFD-
levels
bit errorof ratioP-GSM,
(BER). E-GSM, and
FREQADJ Switch BSC6900 XT(Optional) The frequency band types for the
report. 510101
R-GSM sub-bands
The BSC6900 sends during
this channel
DTRU, QTRU, DRRU, DRFU,
assignment.
parameter toIfthe theBTS,
cell load
which is
GRRU, MRRU, GRFU, and MRFU
SET greater
adjusts than this threshold,
the frequency of an theMS
cannot be configured and thus are
FREQADJVA Frequency Adjust GCELLOTHE BSC assigns
according channels
to the value of according
this GBFD-
calculated based on the selected
LUE Value BSC6900 XT(Optional) to the priority levels of the P-GSM,
parameter. 510101
frequencies such as GSM900,
E-GSM, and R-GSM sub-bands.
ADD DSC1800, PCS1900,and
That is, if the MS supports the P-
BTSANTFEE GSM850. The parameter value for
GSM, E-GSM, and R-GSM sub-
Frequency Band DERBRD(Opti the other board types is set to MRFD-
bands and the cell is configured
FREQBAND Attribute BSC6900 onal) 0xFF. 210301
with the TRXs in the P-GSM, E-
GSM, and R-GSM sub-bands, the
FREQLOADS GSM900 Band SET BSC assigns the channels in the
HARETRAFF Traffic Load GCELLCHMG TRXs of the R-GSM sub-band GBFD-
THRSH Share Threshold BSC6900 AD(Optional) preferentially. 111005
SET
GCELLFREQ
SCAN(Option GBFD-
FREQLST Freq Band List BSC6900 al) List of frequency bands 112401
Frequency multiplexing mode in
the TRX. To enable a loose
frequency multiplexing mode such
as 4x3 multiplexing, set this
parameter to LOOSE. To enable a
SET tight frequency multiplexing mode
FREQREUSE Frequency GTRXDEV(O such as 1x3 or 1x1, set this MRFD-
List of the frequencies to be
MODE Reuse Mode BSC6900 ptional) Type of a scanning
parameter result in the
Whether
measured. toto TIGHT.
enable
This the edgeis
parameter
210301
period from the start of a frequency
handover
represented algorithm. When an
as a character MS
string
scanning task to the reporting of
STR makes
where the a call
IDsatofthe
theedge
TRXs ofto
a cell,
be
the scanning result.
NCS(Mandato the call may
measured aredrop if the received
separated by &, GBFD-
Frequency scanning refers to the
FREQS Frequency List BSC6900 ry) signal
such as level is too low. To avoid
1&124&956. 510901
scanning of an uplink receive level
such a call drop, the edge
of a cell frequency. The scanning
handover algorithm is involved.
SET result reflects the strength of
When the uplink signal level of the
FREQSCANR Frequency Scan GCELLSOFT( frequency signals received by the GBFD-
serving cell is less than "Edge HO
LSTTYPE Result Type BSC6900 Optional) cell. 112401
UL RX_LEV Threshold" or the
downlink signal level of the serving GBFD-
SET cell is less than "Edge HO DL 110601
FRINGEHOE Edge HO GCELLHOBA RX_LEV Threshold", the edge GBFD-
N Allowed BSC6900 SIC(Optional) handover is triggered. 510501
SET
GCELLBASIC Whether the uplink DTX function is
PARA(Option enabled for FR calls. For details, GBFD-
FRULDTX FR Uplink DTX BSC6900 al) see GSM Rec. 05.08. 114803
ADD
BTSAUTOPL
Slot No. of AN(Mandatory GBFD-
FSN Father BTS BSC6900 ) Slot No. of the father BTS 510701
ADD
Slot No. of BTSCONNEC Slot No. for the port of the father GBFD-
FSN Father BTS BSC6900 T(Optional) BTS 111202
ADD
BTSAUTOPL
Subrack No. of AN(Mandatory GBFD-
FSRN Father BTS BSC6900 ) Subrack No. of the father BTS 510701
ADD
Subrack No. of BTSCONNEC Subrack No. for the port of the GBFD-
FSRN Father BTS BSC6900 T(Optional) father BTS 111202
GBFD-
EXP 111203
LOG(Optional Type of the file used for saving MRFD-
FT File Type BSC6900 ) exported logs 210305
ADD
Factor table ADJMAP(Man GBFD-
FTI index BSC6900 datory) Activation factor table index 118605
ADD
Factor table TRMFACTOR GBFD-
FTI index BSC6900 (Mandatory) Activation factor table index 118605
SET
BSCABISPRI
Factor table MAP(Mandato GBFD-
FTI index BSC6900 ry) Activation factor table index 111202
FULLTOHALF SET
Duration of the handover from full
HOATCBOFF F-H ATCB Offset GCELLHOBA ATCB difference between the GBFD-
rate to half rate. If the cell load is
SET Overlay BSC6900 SIC(Optional) overlaid and underlaid subcells 510501
greater than the preset threshold,
the calls that meet the conditions
FULLTOHALF SET for the handover from full rate to
According to the P/N rule, if the
HODURATIO GCELLHOBA half rate are handed over from full GBFD-
conditions for the handover from
N F-H Ho Duration BSC6900 SIC(Optional) rate to half rate in this duration. 510501
full rate to half rate are met for P
seconds within N seconds, the
SET handover is triggered.
FULLTOHALF GCELLHOBA This parameter specifies the GBFD-
HOLASTTIME F-H Ho Last Time BSC6900 SIC(Optional) Period
numberofP.the handover from full 510501
rate to half rate. If the cell load is
greater than the preset threshold,
FULLTOHALF SET
the calls that meet the conditions
HOPATHOFF F-H Pathloss GCELLHOBA Path loss difference between the GBFD-
for the handover from full rate to
SET Offset Overlay BSC6900 SIC(Optional) overlaid and underlaid subcells 510501
half rate are handed over in "H-F
Ho Duration". This parameter
SET specifies the bandwidth to be
According to the P/N rule, if the
FULLTOHALF GCELLHOBA handed over at each hierarchy GBFD-
conditions for the handover from
HOPERIOD F-H Ho Period BSC6900 SIC(Optional) level. 510501
full rate to half rate are met for P
seconds within N seconds, the
SET handover is triggered.
FULLTOHALF F-H Ho Stat. GCELLHOBA This parameter specifies the GBFD-
HOSTATTIME Time BSC6900 SIC(Optional) number N. 510501
If the available forward bandwidth
Forward is less than or equal to this value,
congestion ADD the forward congestion alarm is
FWDCONGB remain TRMLOADTH emitted and forward congestion GBFD-
W bandwidth BSC6900 (Optional) control is striggered. 118605
If the available forward bandwidth
Forward is greater than this value, the
congestion clear ADD forward congestion alarm is
FWDCONGC remain TRMLOADTH cleared and forward congestion GBFD-
LRBW bandwidth BSC6900 (Optional) control is stopped. 118605
If the ratio of available forward
bandwidth is greater than this
Forward ADD value, the forward congestion
FWDCONGC congestion clear TRMLOADTH alarm is cleared and forward GBFD-
LRTH remain ratio BSC6900 (Optional) congestion control is stopped. 118605
If the ratio of available forward
bandwidth is less than or equal to
Forward ADD this value, the forward congestion
FWDCONGT congestion TRMLOADTH alarm is emitted and forward GBFD-
H remain ratio BSC6900 (Optional) congestion control is triggered. 118605
If the available forward bandwidth
Forward overload is greater than this value, the
congestion clear ADD forward overload congestion alarm
FWDOVLDCL remain TRMLOADTH is cleared and forward overload GBFD-
RRSVBW bandwidth BSC6900 (Optional) control is stopped. 118605
If the ratio of available forward
bandwidth is greater than this
value, the forward overload
Forward overload ADD congestion alarm is cleared and
FWDOVLDCL congestion clear TRMLOADTH forward overload control is GBFD-
RTH remain ratio BSC6900 (Optional) stopped. 118605
If the available forward bandwidth
Forward overload is less than or equal to this value,
congestion ADD the forward overload congestion
FWDOVLDRS remain TRMLOADTH alarm is emitted and forward GBFD-
If the ratio of available forward
VBW bandwidth BSC6900 (Optional) overload control is triggered. 118605
bandwidth is less than or equal to
this value, the forward overload
Forward overload ADD congestion alarm is emitted and
congestion TRMLOADTH forward overload control is GBFD-
FWDOVLDTH remain ratio BSC6900 (Optional) triggered. 118605
Forward ADD
FWDRESVH handover TRMLOADTH Ratio of reserved forward GBFD-
OTH reserved ratio BSC6900 (Optional) bandwidth for handover user 118605
Forward
handover ADD
FWDRSVHO reserved TRMLOADTH Reserved forward bandwidth for GBFD-
BW bandwidth BSC6900 (Optional) handover user 118605
If the load balance between a 2G
CS 2G 3G Load SET cell and a 3G cell is greater than
G2G3GLdBlc Balance Delta OTHSOFTPA the threshold, load balance is MRFD-
DeltaThrd Threshold BSC6900 RA(Optional) triggered. 211402
Coefficient used to modulate the
SET load level of a 2G system so that
2G Load GCELLHOINT the load level of the 2G system
G2GLoadAdju Adjustment ERRATLDB(O can be compared with that of a 3G MRFD-
stCoeff Coefficient BSC6900 ptional) system. 211402
SET
TCPARA(Opti G711 Mode. A/U law configuration, GBFD-
G711_Mode G711 Mode BSC6900 onal) 0-A law (default), 1-U law 118602
SET Expected signal receiving strength
GCELLPSPW on the BTS side when GPRS
PARA(Option dynamic power control is GBFD-
GAMMA GAMMA BSC6900 al) implemented 119115
Offset
Information ADD
Collection End AISSCFG(Opt End time for collecting the offset GBFD-
GATHET Time BSC6900 ional) information 118201
Cell load threshold for collecting
Load Threshold ADD the offset information. If the load
of Offset AISSCFG(Opt threshold is exceeded, the offset GBFD-
GATHLOD Collection BSC6900 ional) information is not collected. 118201
Offset ADD
Information AISSCFG(Ma Whether to collect the offset GBFD-
GATHON Collection Switch BSC6900 ndatory) information 118201
Obtains the QoS parameter from
Offset
the Aggregate BSS QoS Profile
Information ADD
(ABQP) of packet flow context
Collection Start AISSCFG(Opt Start time for collecting the offset GBFD-
(PFC) when the MS and the
GATHST Time BSC6900 ional) information 118201
network support the PFC; obtains
This parameter specifies whether
SET the QoS parameter from the uplink
to enable the VGCS/VBS check
GCELLPSOT request originated by the MS or
function. If the BSS works
Support GBR HERPARA(Op the DL UNITDATA of the SGSN. GBFD-
abnormally, the BTS may
GBRQOS QoS BSC6900 tional) GBR: guaranteed bit rate. 119901
periodically send notification
messages even if VGCS/VBS is GBFD-
SET over. In this case, an MS responds 510301
Group Call BSCBASIC(O continuously but cannot access GBFD-
GCChk Check BSC6900 ptional) this VGCS/VBS TCH. 510302
ADD
GPS data report GPS(Optional
GPSPERIOD period BSC6900 ) Period for reporting GPS data None
SET
Number of the VGCS call that the
GCELLCHMG Whether to allow hierarchical
BTS originates in the timeslot in
GRADEACCA Grade Access BASIC(Option access and to reserve resources GBFD-
the TRX in fallback mode. This
LLOW Allow BSC6900 al) for high-priority MSs 116001
parameter is represented in
SET decimal, such as 10000569. If this
Number of the VGCS call that the
BTSCHNFALL parameter is set to 100000000, the
BTS originates in the timeslot in
GROUPCALL Group Call Num BACK(Mandat channel is not configured with any GBFD-
the TRX in fallback mode. This
NUM1 1 BSC6900 ory) fixed group call. 510309
parameter is represented in
SET decimal, such as 10000569. If this
BTSCHNFALL parameter is set to 100000000, the
GROUPCALL Group Call Num BACK(Mandat channel is not configured with any GBFD-
NUM2 2 BSC6900 ory) fixed group call. 510309
ADD
ICMP type which ICMPGUARD( Packet type against the ICMP
GUARDTYPE will be guarded BSC6900 Mandatory) attack None
When the BTS is accessed from
ADD the public network, the BTS
BTS SeGW IP BTSAUTOPL security network IP address must GBFD-
GWIP Address BSC6900 AN(Optional) be configured. 118601
IP address of the BTS security
gateway. This parameter needs to
BTS Security SET be configured when the BTS
Gateway IP BTSIP(Option connects to the BSC6900 through GBFD-
GWIP Address BSC6900 al) the public network. 118601
HALFTOFULL SET
ATCBOFFSE H-F ATCB Offset GCELLHOBA ATCB difference between the GBFD-
T Overlay BSC6900 SIC(Optional) overlaid and underlaid subcells 510501
Duration of the handover from half
rate to full rate. If the cell load is
less than the preset threshold, the
calls that meet the conditions for
HALFTOFULL SET the handover from half rate to full
According to the P/N rule, if the
HODURATIO GCELLHOBA rate are handed over from half rate GBFD-
conditions for the handover from
N H-F Ho Duration BSC6900 SIC(Optional) to full rate in this duration. 510501
half rate to full rate are met for P
seconds within N seconds, the
SET handover is triggered.
HALFTOFULL GCELLHOBA This parameter specifies the GBFD-
HOLASTTIME H-F Ho Last Time BSC6900 SIC(Optional) number P. 510501
HALFTOFULL SET
According to the P/N rule, if the
HOPATHOFF H-F Pathloss GCELLHOBA Path loss difference between the GBFD-
conditions for the handover from
SET Offset Overlay BSC6900 SIC(Optional) overlaid and underlaid subcells 510501
half rate to full rate are met for P
seconds within N seconds, the
SET handover is triggered.
HALFTOFULL H-F Ho Stat. GCELLHOBA This parameter specifies the GBFD-
HOSTATTIME Time BSC6900 SIC(Optional) number N. 510501
SET
Antenna BTSRXUBP( Whether the tower-top amplifier is GBFD-
HAVETT1 Tributary 1 Flag BSC6900 Optional) installed on antenna tributary 1. 111202
SET
Antenna BTSRXUBP( Whether the tower-top amplifier is GBFD-
HAVETT2 Tributary 2 Flag BSC6900 Optional) installed on antenna tributary 2. 111202
ADD
Heartbeat SCTPLNK(Op Heartbeat interval when the SCTP GBFD-
HBINTER interval BSC6900 tional) server is idle 118602
SET
HOCELLIDTY Specify Index of FHO(Mandato GBFD-
PE Cell Handover to BSC6900 ry) Type of indexing the target cell 111203
SET
GCELLHOBA
SIC(Optional)
SET
GCELLHOEM
SET
G(Optional)
HOCELLNAM Cell Name of FHO(Mandato GBFD-
SET
E Handover to BSC6900 ry) Unique name of the target cell 111203
GCELLHOFIT
PEN(Optional)
SET Whether to use handover
Handover directio forcast switch.
HOCTRLSWI Current HO GCELLHOIU algorithm generation 1 or 2 MRFD-
When this parameter is set to YES,
TCH Control Algorithm BSC6900 O(Optional) This parameter indicates P in the
currently 210301
the BSC6900 can forecast the
P/N rule for MS handover direction
handover direction of the call in
forcast.
Handover SET fast handover so that the best
P/N rule: Among N handovers, the
HODIRFORE Direction GCELLHOFA target cell can be selected for GBFD-
MS is handed over to Class B
CASTEN Forecast Enable BSC6900 ST(Optional) This parameter indicates N in the
handover. 510103
chain neighboring cell for
P/N rule for MS handover direction
Handover successively P times, then the
forcast.
Direction SET BSC6900 determines that the MS
P/N rule: Among N handovers, the
HODIRLASTT Forecast Last GCELLHOFA is moving to the Class B chain GBFD-
MS is handed over to Class B
IME Times BSC6900 ST(Optional) neighboring cell. 510103
chain neighboring cell for
Handover successively P times, then the
Direction SET BSC6900 determines that the MS
HODIRSTATI Forecast Statistic GCELLHOFA is moving to the Class B chain GBFD-
ME Times BSC6900 ST(Optional) neighboring cell. 510103
Fast handover can be triggered
Quick Handover SET only when the downlink level of the
According to the P/N rule, if the
HODOWNTRI Down Trigger GCELLHOFA serving cell is less than this GBFD-
conditions for the handover to a
GE Level BSC6900 ST(Optional) parameter. 510102
better 3G cell are met for P
seconds within N seconds, the GBFD-
FDD 3G Better ADD handover is triggered. 110601
According to the P/N rule, if the
Cell HO Valid G3GNCELL(O This parameter specifies the GBFD-
conditions for the handover to a
HODURT3G Time BSC6900 ptional) number P. 510501
better 3G cell are met for P
seconds within N seconds, the GBFD-
TDD 3G Better ADD handover is triggered. 110601
HODURT3GT Cell HO Valid G3GNCELL(O This parameter specifies the GBFD-
DD Time BSC6900 ptional) number P. 510501
The 3G better cell handover can
SET be triggered only when the Ec/No GBFD-
Ec/No Threshold GCELLHOUT of a neighboring 3G cell is greater 114301
HOECNOTH3 for Better 3G Cell RANFDD(Opti than this threshold for a period of GBFD-
According to the P/N rule, if the
G HO BSC6900 onal) time. 114302
conditions for fast handover are
met in P of N measurement
ADD reports, the handover is triggered.
Quick Handover G2GNCELL(O This parameter specifies the GBFD-
HOLASTTIME Last Time BSC6900 ptional) number P. 510102
High SET
Temperature BTSAPMUBP Whether to enable battery power- MRFD-
HTSDF Shutdown Flag BSC6900 (Optional) off against high temperature. 210304
ADD
Enable Humidity EMU(Optional MRFD-
HUM_MASK Alarm Reporting BSC6900 ) Humidity alarm switch 210304
SET
BTSAIRCON( Delay for which the BTS waits to GBFD-
HYSON Hysteresis for On BSC6900 Optional) switch on the air conditioner 111202
This timer is started after a
connection is established
successfully. If a detection
SET message is not received when this
SCCPTMR(O timer expires, the connection will GBFD-
IARXTMR Inactive RX timer BSC6900 ptional) be released. 111804
STR
TRANSPERF
TST(Mandator GBFD-
IASUDURAT Duration BSC6900 y) Duration in IASU mode 111207
STR
TRANSPERF Port number in IASU mode. For
TST(Mandator the BTS3002C, the port number GBFD-
IASUPORT Port No. BSC6900 y) cannot be set to "E1PORT3". 111202
STR
TRANSPERF
IASUSLCTTM Transmission TST(Mandator Minimum
Type of the C/Itransmission
ratio that IBCA AMR
board in GBFD-
U Board Type BSC6900 y) FR
IASU services
mode allow. An idle channel 111202
This timer is started after a
can be assigned to such a service
connection is established
only when the C/I ratio of the idle
SET successfully. When this timer
channel is greater than this
SCCPTMR(O Minimum
expires, aC/I ratio that
detection IBCA AMR
message will GBFD-
threshold. In addition, a new call
IATXTMR Inactive TX timer BSC6900 ptional) HR services
be sent to theallow.
peerAnend.idle channel 111804
associated with such a service can
can be assigned to such a service
be established only when the call
only when the C/I ratio of the idle
IBCA AMR FR SET does not decrease the C/I ratio of
channel is greater than this
IBCAAFRSOF Soft Block GCELLCHMG the established calls to a value GBFD-
threshold. In addition, a new call
TBLKTHRD Threshold BSC6900 AD(Optional) less than this threshold. 117002
associated with such a service can
be established only when the call
IBCA AMR HR SET does not decrease the C/I ratio of
IBCAAHRSO Soft Block GCELLCHMG the established calls to a value GBFD-
FTBLKTHRD Threshold BSC6900 AD(Optional) less than this threshold. 117002
Length of the timer for a new call
to wait for the measurement report
SET
(MR) on the signaling channel
IBCAALLOW GCELLCHMG Whether to enable the IBCA GBFD-
when dynamic measurement of the
ED IBCA Allowed BSC6900 AD(Optional) algorithm 117002
BA2 list is enabled during
Number of measurement reports
assignment. If this parameter is set
sampled for averaging path loss. A
IBCAASSWAI SET to 0, dynamic measurement of the
single measurement report may
TMEASURER IBCA Assign GCELLCHMG BA2 list is not enabled during GBFD-
not reflect the actual network
PTTIME Waiting Mr Time BSC6900 AD(Optional) When the IBCA algorithm is
assignment. 117002
situations accurately. Therefore,
enabled, this parameter is used to
the BSC needs to average the
calculate the actual soft blocking
IBCACALLIN SET measured values in several
threshold of an existing call. The
FOFILTERLE IBCA Call GCELLCHMG successive measurement reports GBFD-
formula is as follows: Actual soft
N Information Filter BSC6900 AD(Optional) to reflect the radio environment. 117002
blocking threshold of an existing
call = Configured soft blocking
IBCACALLSO IBCA Set-up Call SET threshold of an existing call - IBCA
When the IBCA algorithm is
FTBLOCKTH Soft Block GCELLCHMG Set-up Call Soft Block Threshold GBFD-
enabled, this parameter is used to
OFFSET Threshold Offset BSC6900 AD(Optional) Offset. 117002
calculate the target CIR of an
existing call. The formula is as
IBCACALLTA Target CIR Offset SET follows: Target CIR of an existing
RGETCIROF of IBCA Set-up GCELLCHMG call = Target CIR in use + Target GBFD-
FSET Call BSC6900 AD(Optional) CIR Offset of IBCA Set-Up Call. 117002
path loss cannot be computed
directly according to a
measurement report. This
Whether to measure the IBCA
parameter is configured according
neighbor cells of the serving cell
Length of the timer
to the combined lossforanda call to
dynamically. If the dynamic
measure
hierarchical thedual-antenna
path loss in the gain (3
measurement
Whether is enabled, when a
dB) of thethe
neighboring IBCA
cell
BTS. withforced
strong BTS
call uses a channel,
synchronization is the BSC
allowed. When
interference
"IBCA Downlink of thePathtargetLoss cell. The
Offset"
sends
this the
parameterSACCH is of Modify
set toneeds
YES,
SET call to
= combinedbe handed
loss over
BTS + the to
message to modify
synchronization the frequencies
procedure is of
IBCADLPATH IBCA Downlink GCELLCHMG measure
hierarchical thedual-antenna
path loss before gain GBFD-
in the BA2 even
performed table though
in System
LOSSOFF Path Loss Offset BSC6900 AD(Optional) initiating
BTS (3 dB) the handover tothe theBTSs
target 117002
Information
are 5, 5bis, Whenand 5ter thisto the
cell insynchronous.
when dynamic measurement
IBCA Dyn frequencies
parameter at which thetheIBCA
of the BA2 is listset
is to NO,
enabled during
IBCADYNCM Measure ADD neighbor
existing cells operate.
procedure, Thus,
either the the
the emergency handover. When
EASURENCE Neighbour Cell G2GNCELL(O call measures
synchronization and reports only GBFD-
this parameter isprocedure or the
set to 0, dynamic
LLALLOWED Flag BSC6900 ptional) these frequencies to the
out-of-synchronization BSC6900.
procedure, 117002
measurement of the BA2 list is not
IBCAEHOAS is performed
enabled in theasemergency
required. Note that
Whether the IBCA flexible TSC
SWAITMEAS SET the synchronization
handover, status of the
and the parameter "Wait
function is enabled. When this
URERPTTIM IBCA Urgent HO GCELLCHMG IBCA
Time forneighboring
Valid MRscells in IBCAis HO" is GBFD-
parameter is set to NO, the flexible
E Waiting Mr Time BSC6900 AD(Optional) determined
invalid. by the internal 117002
TSC function is disabled and the
software parameters of the IBCA
configured TSC is used. When the
neighboring cells, that is, if this
SET BTS supports Flex TSC and this
parameter in IBCA neighboring
IBCAFLEXTS IBCA Flexible GCELLCHMG Minimum
parameterC/I ratiotothat
is set YES, IBCA
the GBFD-
cells is set to YES, the IBCA
CALLOWED TSC Allowed BSC6900 AD(Optional) FR/EFR
flexible TSCservices allow.
function An idle
is enabled. 117002
neighboring cells are considered to
channel can be assigned to such a
IBCA Forced be always synchronous; otherwise,
service only when the C/I ratio of
IBCAFORCE BTS SET the IBCA neighboring cells are
the idle channel is greater than this
DBTSSYNCA Synchronization GCELLCHMG considered to be out of GBFD-
threshold. In addition, a new call
LLOWED Allowed BSC6900 AD(Optional) synchronization. 117002
associated with such a service can
Length of the timer for a call to wait
be established only when the call
for other valid MRs after receiving
IBCA FR/EFR SET does not decrease the C/I ratio of
the first valid MR of the target cell
IBCAFRSOFT Soft Block GCELLCHMG Minimum C/I ratio
the established thattoIBCA
calls a value HR GBFD-
if dynamic measurement of the
BLKTHRD Threshold BSC6900 AD(Optional) services
less thanallow. An idle channel can
this threshold. 117002
BA2 list is enabled during
be assigned to such a service only
handover. When this parameter is
when the C/I ratio of the idle
IBCAHOASS SET set to 0, the call does not wait for
channel is greater than this
WAITMEASU IBCA HO Waiting GCELLCHMG other MRs after receiving the first GBFD-
threshold. In addition, a new call
RERPTTIME Effective Mr Time BSC6900 AD(Optional) MR of the target cell. 117002
associated with such a service can
be established only when the call
SET does not decrease the C/I ratio of
IBCAHRSOF IBCA HR Soft GCELLCHMG the established calls to a value GBFD-
In the ICDM matrix algorithm, the
TBLKTHRD Block Threshold BSC6900 AD(Optional) less than this threshold. 117002
signal strength (0-63) is divided
into 10 levels. The signal strength
SET that is smaller than or equal to the
Whether to enable the ICDM
IBCAICDMRE IBCA ICDM Initial GCELLCHMG value of this parameter is at the GBFD-
algorithm for the cell. The ICDM
LEVOFFSET Level Offset BSC6900 AD(Optional) initial level. 117002
algorithm helps to improve the
precision in estimating the path
SET loss of an IBCA neighbor cell and
IBCAICDMS IBCA ICDM GCELLCHMG to increase the efficiency of the GBFD-
WITCH Switch BSC6900 AD(Optional) IBCA algorithm. 117002
Period of information exchange
IBCA Info Report SET between the BSC boards. The
IBCAINBSCIN Period Within OTHSOFTPA information helps to estimate the GBFD-
Adds a specified offset to the
FORPTPRD BSC BSC6900 RA(Optional) C/I ratio for the IBCA algorithm. 117002
downlink target receive level when
power control algorithm III is used
IBCAINITPCR IBCA Init. Power SET to calculate the initial transmit
XLEVDLOFF Control GCELLCHMG power of a BTS in the IBCA GBFD-
SET RexLevDL Offset BSC6900 AD(Optional) function 117002
Adds
In an IUOa specified
cell (or offset
a CoBCCH to the cell),
uplink target receive
the path loss of an MS to the level when
power control algorithm
serving cell or a neighboring III is used
cell
IBCAINITPCR IBCA Init. Power SET to calculateonthe
measured theinitial
underlaytransmit is used
XLEVULOFF Control GCELLCHMG power
together of with
an MS thisinoffset
the IBCA to
parameter GBFD-
Adds a specified to the
SET RexLevUL Offset BSC6900 AD(Optional) function
estimate the path loss on the 117002
downlink target receive quality
overlay.
when power IUO control
path loss algorithm III is
IBCAINITPCR IBCA Init. Pwr SET compensation
used to calculate = Combiner
the initial insert transmit
XQUALDLOF Ctrl Rx Qual DL GCELLCHMG loss
power difference
of a BTS+inPath loss
the IBCA GBFD-
Adds a specified offset to the
FSET Offset BSC6900 AD(Optional) difference
function due to the use of 117002
uplink target receive quality when
different antennas + Path loss
power control algorithm III is used
difference due to different
IBCAINITPCR IBCA Init. Pwr SET to calculate the initial transmit
frequency selectivity. This value is
XQUALULOF Ctrl Rx Qual UL GCELLCHMG power of an MS in the IBCA GBFD-
calculated based on the IUO level
FSET Offset BSC6900 AD(Optional) function 117002
values measured by field
engineers. When different
SET Estimates
antennas are the used
receive by level
the overlayof the
Determines
unmeasured the
IBCA MAIO selection
neighboring
IBCAIUOPAT IBCA IUO Path GCELLCHMG and underlay, the level must be GBFD-
method
cells. Whenfor each timeslot. The
HLOSSOFF Loss Offset BSC6900 AD(Optional) measured atamultiple
consecutive locations."IBCA 117002
Optimal MAIO
Non Measurement Ncell policy selects
Stat.the
optimal MAIO being evaluated,
Num" measurement reports cover
SET while
less the
than Random
six MAIO policy
neighboring cells (or
The IBCA interference evaluation
IBCAMAIOUS IBCA MAIO GCELLCHMG randomly
the number selects theareported
MAIO out of GBFD-
process onlyofconsiders the
MTD Using Method BSC6900 AD(Optional) qualified
neighboring MAIOs. is smaller than 117002
interference cells of the strongest N
Indicates whether this neighboring
that of the
existing callsactually
on theconfigured
newly-
cell is the IBCA neighboring cell of
IBCA Max. SET neighboring
established call cells),
being thisevaluated.
parameter
the serving cell. That is, when a
IBCAMAXINT Interference GCELLCHMG is used to estimate
This parameter corresponds the receive to the GBFD-
cell is configured as the
FSRCNUM Source Num. BSC6900 AD(Optional) level of the unmeasured
above-mentioned N. IBCA 117002
neighboring cell of the serving cell,
neighboring cells. The estimated
whether the IBCA algorithm
value
Estimatesis "IBCA Pathloss
the interference
receive Est of
level of the
ADD considers the between
Non. MR
unmeasured Ncell".IBCA Otherwise, the
IBCANCELLF IBCA Neighbor G2GNCELL(O the serving
Length of the cell andneighboring
timer thea call to
for GBFD-
signal
cells. strength
When acell.of the
consecutive unmeasured"IBCA
LAG Cell Flag BSC6900 ptional) neighboring
measure the path cells loss in the 117002
IBCA
Non Measurement NcellisStat.
neighboring the
neighboring
signal strength cellofwith strong
thereports
measured
Num" measurement cover
IBCANCELLP IBCA Pathloss SET interference
neighboring of the(including
cells target cell. The
non-
less than
When thesix IBCA neighboring
algorithm cells is (or
ATHLOSSES Est of Non. MR GCELLCHMG call
IBCA toneighboring
be handed over cells) needs
subtracted to GBFD-
the number
enabled, thisofparameter
the reported is used to
TIMATE Ncell BSC6900 AD(Optional) measure
by "IBCA the RxLev pathOffset".
loss before 117002
neighboring
calculate the target cells is CIRsmaller
of athan new
initiating the handover to the target
that
call. of
The theformula
actuallyis configured
as follows:
cell when dynamic measurement
IBCANEWCA SET neighboring
Target CIR ofcells), a newthis callparameter
= Target
of the BA2 list is enabled during
LLCIROFFSE Target CIR Offset GCELLCHMG is
CIRused to estimate
in use + Target the CIRreceive
Offset of GBFD-
the normal handover. When this
T of IBCA New Call BSC6900 AD(Optional) level
IBCAof NewtheCallunmeasured IBCA 117002
parameter is set to 0, dynamic
neighboring cells. The estimated
IBCANHOAS measurement of the BA2 list is not
value is "IBCA Pathloss Est of
SWAITMEAS SET enabled in the normal handover,
Non. MR Ncell". Otherwise, the
URERPTTIM IBCA Natural HO GCELLCHMG and the parameter "Wait Time for GBFD-
signal strength of the unmeasured
E Waiting Mr Time BSC6900 AD(Optional) Valid MRs in IBCA HO" is invalid. 117002
IBCA neighboring cells is the
When the IBCA algorithm is
signal strength of the measured
enabled and the HSN is not 0, the
IBCANONME IBCA Non SET neighboring cells (including non-
IBCA priority and the
ANCELLSTAT Measurement GCELLCHMG IBCA neighboring cells) subtracted GBFD-
SDCCH/PDCH priority are divided
NUM Ncell Stat. Num BSC6900 AD(Optional) by "IBCA RxLev Offset". 117002
by this corrected factor
respectively to reduce the weight
SET of IBCA priority. In addition, the
IBCAOPRRE Corrected Factor GCELLCHMG priority of the interference band is GBFD-
VISEFACTOR of IBCA Priority BSC6900 AD(Optional) considered. 117002
Estimates the receive level of the
unmeasured IBCA neighboring
cells. When a consecutive "IBCA
Specifies a period during
Non Measurement which the
Ncell Stat.
inter-BSC information
Num" measurement reports coverexchange
IBCAOUTBS IBCA Info Report SET must
less be completed.
than The
When thesix
pathneighboring
loss of an cells
MS to(ora
CINFORPTP Period Between OTHSOFTPA information
the number of is mainly
the used by IBCA
reported GBFD-
neighboring cell cannot be
RD BSC BSC6900 RA(Optional) for C/I ratio estimation.
neighboring cells on
is smaller than 117002
measured based the existing
Considers the influence of history
that of the actually
measurement configured
results, it is
path loss information during the
SET neighboring
estimated based cells),onthis
theparameter
path loss
calculation of the ICDM algorithm
IBCAPATHLO IBCA Pathloss GCELLCHMG is
of used
the MS to to
estimate the receive
the serving cell plus GBFD-
path loss. The smaller the filtering
SSOFF Offset BSC6900 AD(Optional) level
the IBCAof the unmeasured
path loss offset.IBCA 117002
coefficient, the smaller the
neighboring cells. The estimated
influence of history path loss; on
value is "IBCA Pathloss Est of
SET the other hand, the larger the
Non. MR Ncell". Otherwise, the
IBCAPLFILTF IBCA Path Lose GCELLCHMG filtering coefficient, the larger the GBFD-
signal strength of the unmeasured
ACTOR Filter Factor BSC6900 AD(Optional) influence of history path loss. 117002
IBCA neighboring cells is the
signal strength of the measured
ADD neighboring cells (including non-
IBCARXLEVO IBCA RxLev G2GNCELL(O IBCA neighboring cells) subtracted GBFD-
FFSET Offset BSC6900 ptional) by "IBCA RxLev Offset". 117002
Use this parameter
Whether the handover when the calls
of the path
SET loss of an MS to serving
on the single channels is allowed cells
IBCASCELLP IBCA Service GCELLCHMG cannot
(single be measured
channels based
twoon the GBFD-
MSs that supportare SAIC the can half-
ATHLOSS Cell Pathloss BSC6900 AD(Optional) existing measurement
rate sub-channels results
on a timeslot, in 117002
tolerate a lower carrier-to-
which only one
interference is in
ratio. thevariable
This occupied
SET state) when
indicates thesingle channels are to
downward
IBCASOFTBL IBCA Soft Block GCELLCHMG be adjustedstep
adjustment to a offull-rate
the softchannel. GBFD-
KSAICOFF SAIC Offset BSC6900 AD(Optional) When
blockingthisthreshold
parameter is set MSs.
of SAIC to ON, 117002
Whether to deny the access of a
the handover of the calls on the
call when none of the MAIO
single channels is allowed; if this
SET evaluation results meets the C/I
parameter is set to OFF, the
IBCASOFTBL IBCA Soft Block GCELLCHMG ratio requirement of the call during GBFD-
handover of the calls on the single
KSWITCH Switch BSC6900 AD(Optional) channel assignment 117002
channels is not allowed. This
IBCA Sub- parameter is valid only when the
IBCASUBCH Channel SET IBCA algorithm is enabled and full
NHANDOVER Handover GCELLCHMG rate is preferred for the newly GBFD-
Whether a MAIO meets the access
ALLOWED Allowed BSC6900 AD(Optional) established call. 117002
requirement. When the C/I ratio of
Whether
a MAIO isa higher
single than
IBCAthis MS can
IBCA MAIO SET dynamically
threshold, the measure
MAIO can thebe
IBCATARGET Target C/I GCELLCHMG neighboring
assigned to the cells. When
call beingthis GBFD-
CIRTHRSH Threshold BSC6900 AD(Optional) parameter
processed.is set to YES, the 117002
neighboring cells where "IBCA
Dynamic Measure Neighbor Cell
SET Whether to enable the IBCA
Flag" is set to YES are dynamically
IBCAUSEDIU IUO IBCA GCELLCHMG algorithm for the overlay and GBFD-
measured. Dynamic measurement
OSUBLAY Allowed BSC6900 AD(Optional) The lowest
underlay of C/I ratio cell
an IUO that can be 117002
on neighboring cells is mutually
tolerated by IBCA WAMR FR. The
exclusive to directed retry. When
C/I ratio of an idle channel must be
IBCAUSRDY IBCA User Dyn SET this parameter is set to YES, it is
larger than this parameter.
NCMEASURE Measure GCELLCHMG recommended that "Direct Retry" GBFD-
Otherwise, it cannot be assigned.
NCELL Neighbor Cell BSC6900 AD(Optional) be set to NO. 117002
In addition, the system does not
allow a newly-established call
IBCAWAFRS IBCA WAMR FR SET causing the C/I ratio of existing
OFTBLKTHR Soft Block GCELLCHMG calls to be lower than this GBFD-
D Threshold BSC6900 AD(Optional) parameter. 117002
of a cell.
This parameter specifies whether
to allow the cell to enable the ICB
function. When this parameter is
set to YES, the TCHs on the non-
BCCH TRX are preferentially
assigned. In this way, the largest
SET possible number of idle TCHs is
Whether to enable the intelligent
GCELLBASIC reserved on the BCCH TRX, and
control of the diesel engine. If this
PARA(Option thus the BCCH TRX enters the GBFD-
parameter is set to ENABLE, the
ICBALLOW ICB Allowed BSC6900 al) ICB mode. 111604
PMU will control the diesel engine
automatically according to the
SET settings of the parameters to save
Intelligent Control BTSAPMUBP the energy. This parameter is set GBFD-
ICF Flag BSC6900 (Optional) to ENABLE by default. 111202
STR
SCHTSK(Opti GBFD-
ID Task ID BSC6900 onal) Number of the scheduled task 111203
ADD
BTSBRDCAP( GBFD-
ID Index BSC6900 Mandatory) Index 111202
This parameter indicates the idle
SET code of the A interface. It is used
TCPARA(Opti for the interconnection of the A GBFD-
Idle_Code Idle Code BSC6900 onal) interfaces. 118602
SET
E1T1LOP(Opt
When the number of idle SDCCH
IDLECODE Idle code BSC6900 ional) IDLE code None
channels in a cell is smaller than
SET this parameter, the system
GCELLCHMG searches for available TCHs and
IDLESDTHRE Idle SDCCH BASIC(Option transforms them into SDCCH GBFD-
S Threshold N1 BSC6900 al) channels. 113001
ADD
BTSAUXEQP(
ON(Mandator
TRANSPERF
ory)
BTSALMMGM
Mandatory)
y)
TST(Mandator
SET
RULE(Mandat
SET
ADD
y)
PSCELLTOD
ory)
BTSBAT(Man
EXTNCELL(M
SWP
SP(Mandatory
SET
datory)
andatory)
BTSBRD(Man
)
BTSANTFEE
SET
datory)
SET
DERCONNEC
BTSCHNFALL
BSCSYNCOF
SWP
GCELLNC2P
T(Mandatory)
BACK(Mandat
F(Mandatory)
BTSCLKCLTP
ARA(Mandato
ADD
ory)
SET
T(Mandatory)
ry)
ADD
BTSOBJALM
ADD
BTSAISS(Ma GBFD-
TST
SET
BTSESN(Man
IDTYPE Index Type BSC6900 SHLD(Mandat
BTSIPRTBIN
ndatory) Index type 111202
BTSBRD(Man
GCELLNCRE
datory)
ory)
D(Mandatory)
datory)
SELECTPAR
SET
ADD
EXP
STR
A(Mandatory)
BSCABISPRI
BTSCONNEC
GCELLTEMP
TRXBURSTT
SET
MAP(Mandato GBFD-
T(Mandatory)
LATE(Mandat
IDTYPE BTS Index Type BSC6900 ST(Mandatory
GCELLNWCT
ry) BTS index type 111202
ADD
)ory)
RLMSRPARA(
BTSMONITO
SAV
SET
Mandatory)
RTS(Mandato
GCELLTEMP
BTSENVALM(
SET
ry)
LATE(Mandat MRFD-
Mandatory)
GCELLRESE
IDTYPE Index Type BSC6900 ADD
ory) Type of an index 210301
STR
LECTPARA(M
BTSABISHDL
BTSVSWRTS
andatory)
CPATH(Mand
T(Mandatory)
SET
ADD
atory)
LOD
GCELLSERV
G2GNCELL( MRFD-
ADD
IDTYPE Index Type BSC6900 BTSPATCH(M
PARA(Mandat
Mandatory) Index type 210301
BTSABISMUX
andatory)
ory)
FLOW(Manda
SET
CON
SET
tory)
GCELLHOINT
BTSPATCH(M
GCELLSTAN
ADD
ERRATLDB(M MRFD-
andatory)
DARDOPTPA
IDTYPE Index Type BSC6900 BTSBIND2HD
andatory) Type of an index 211402
SET
RA(Mandatory
LCPATH(Man
BTSLOADCT
)
datory)
RL(Mandatory
SET Subscribers can specify the cell
SET
)GCELLGPRS( according to the index or the MRFD-
GCELLFREQ
IDTYPE Index Type BSC6900 CHG
Mandatory) name. 210301
SCAN(Mandat
BTSPTUSHK
ory)
TM(Mandator
SWP Index type of the BTS. BYNAME:
y)
BTSLOCGRP query by BTS name; BYID: query GBFD-
PING
IDTYPE Index Type BSC6900 (Mandatory) by BTS index. 111202
BTSCFM(Man
datory)
TRC
BTSCFM(Man Index type. BYNAME: query by GBFD-
IDTYPE Index Type BSC6900 datory) name; BYID: query by index. 111202
SET
MSTOCELL(
ADD
Mandatory)
Semipermanent SEMILINK(Ma GBFD-
TST
IDX Link Index BSC6900 ndatory) Index of the semipermanent link 114701
SNDRSI(Man
datory)
TST
UPDMSRAC( Whether theindex
Support the handshake
based on the MRFD-
IDXTYPE Index Type BSC6900 Mandatory) mechanism
TLLI and IMSIis enabled
mode at the Cb 210301
interface. Currently, the BSC6900
SET
and the CBC communications
PSCELLTOD
through the TCP/IP protocol. Thus,
SP(Mandatory Index type, supporting the index GBFD-
the BSC6900 may not detect
IDXTYPE Index Type BSC6900 ) based on the cell and BSC mode. 111203
communication link disconnection
in some cases. The handshake
ADD mechanism is used for checking
IFCBSHAKEH If CB Shake GCBSADDR( whether a communication link is GBFD-
AND Hand BSC6900 Optional) normal. 113601
ADD
Outgoing BTSIPRT(Man Number of the outgoing interface GBFD-
IFNO Interface No. BSC6900 datory) of a link 111202
SET
IFOFFSETLO BTSRXUBP( Indication offset in the middle GBFD-
STR
W Indication Offset BSC6900 Optional) frequency offset configuration 111202
BTSLOG(Opti
onal) Whether to report the progress.
Number of invalid measurement
ULD "NO" indicates that the progress is
reports allowed when the
Report Process BTSLOG(Opti not reported. "YES" indicates that GBFD-
BSC6900 filters the measurement
IFREPPRO Flag BSC6900 onal) the progress is reported. 111202
reports. When the number of
received measurement reports is
Ignore SET no larger than this parameter, the
IGNOREMRN Measurement GCELLHOFA This
BSC parameter specifies
does not perform whether
filtering or GBFD-
CHK to support
UM Report Number BSC6900 ST(Optional) make quickthe takeoverjudgment.
handover of the 510102
INNSPCH(Ma packet immediate assignment by
ndatory) the BTS. It is relative to the uplink
STR immediate assignment. To improve
CALLRESLO the access rate of the MS, the BSS GBFD-
IMEI IMEI BSC6900 P(Mandatory) Value of an
allocates theIMEI
uplink TBF resources 111203
to the for
Timer BTS in BSC6900
the advance. The BTSfor
waiting
SET sends the immediate
a CC message assignment
after sending a CR
IMMASSAINT IMM ASS A IF GCELLTMR(O message
message.to MS through
If the timer expires, the
the GBFD-
The channel activation and
ERFTIMER Creation Timer BSC6900 ptional) resources
seized SDCCH allocated by the BSC.
is released. 111804
immediate assignment messages
When receiving the immediate
SET are sent at the same time to
assignment message, the MS can
Immediate GCELLBASIC accelerate the signaling
send the data block. The BTS
Assignment PARA(Option processing, thus increasing the GBFD-
needs to send the assistant
IMMASSCBB Optimized BSC6900 al) response speed of the network. 110502
channel request to the BSC. When
Whether to allow immediate TCH
SET receiving the request, the BSC
assignment. If this parameter is set
Move Immediate GCELLPSOT sends the immediate assignment
to YES, the BSC can assign a TCH
IMMASSDLS Assignment HERPARA(Op request to the BTS to complete the GBFD-
immediately when there is no
HIFT Down to BTS BSC6900 tional) TDF setup flow. 119202
available SDCCH for a channel
Maximum time delay in resending
SET request. If this parameter is set to
an immediate assignment
GCELLBASIC NO, the BSC can assign only an
message. Within the period
TCH Immediate PARA(Option SDCCH when processing a GBFD-
specified by this parameter, an
IMMASSEN Assignment BSC6900 al) channel access request. 110502
immediate assignment message
Maximum number of
can be dispatched and
retransmissions of an immediate
Max Delay of SET retransmitted. Otherwise, the
assignment message. When the
IMMASSMAX IMM ASS GCELLCCTM message is not dispatched or GBFD-
value of this parameter is reached,
DELAYTIME Retransmit BSC6900 R(Optional) retransmitted. 110502
the immediate assignment
message is not retransmitted even
Max Transmit SET if the value of "Max Delay of
IMMASSMAX Times of IMM GCELLCCTM Imm_Ass Retransmit" is not GBFD-
SENDNUM ASS BSC6900 R(Optional) exceeded. 110502
Whether the BSC6900 sends
Use IMM ASS SET immediate assignment
IMMASSRES Retransmit GCELLCCTM retransmission parameters to the GBFD-
ENDEN Parameter BSC6900 R(Optional) BTS 110502
Whether to assign channels
according to the access_delay
SET value in channel request
When the access_delay value in
IMMASSTAAL TA Pref. of Imme- GCELLHOIU messages during immediate GBFD-
the channel request message is
LOW Assign Allowed BSC6900 O(Optional) channel assignment 113201
smaller than this parameter, the
overlay channels are assigned
TA Threshold of SET preferentially; otherwise, the
IMMASSTATH Imme-Assign GCELLHOIU underlay channels are assigned GBFD-
RES Pref BSC6900 O(Optional) Timer carried by the Wait
preferentially. 113201
Indication information element
when the BSC6900 sends an
Immediate Initial ADD
immediate assignment reject
Adjust After Site AISSCFG(Opt Whether to adjust the offset time GBFD-
message to an MS.
IMMFNAD Reset Enable BSC6900 ional) immediately after the BTS is reset 118201
After the MS receives the
immediate assignment reject
SET message, the MS reattempts to
IMMREJWAIT GCELLTMR(O access the network after the timer GBFD-
CHK
INDTIMER T3122 BSC6900 ptional) expires. 110502
INNSPCH(Ma
SET
ndatory)
MSTOCELL(
STR
Mandatory)
CALLRESLO GBFD-
TST
IMSI IMSI BSC6900 P(Mandatory) Value of an IMSI 111203
SNDRSI(Man
datory)
TST International mobile subscriber
Timer for the BSC6900 waiting for
UPDMSRAC( identity of the MS. IMSI containing GBFD-
a handover complete message
IMSI IMSI BSC6900 Mandatory) the number 0 to 9. 114101
after sending a handover request
acknowledgment message in GBFD-
SET 2G/3G handover or inter-BSC 110601
INBSCHOTIM GCELLTMR(O handover. If the timer expires, a GBFD-
ER T3121 BSC6900 ptional) Clear REQ message is reported. 510501
Threshold for fine tuning the BTS
ADD clock. If the offset of the BTS clock
Fine Tuning AISSCFG(Opt is smaller than the threshold, no GBFD-
INCHLOD Threshold BSC6900 ional) fine tuning is performed. 118201
ADD
Included angle formed by the
Fine Tuning AISSCFG(Opt GBFD-
major lobe azimuths of the
INCHPRD Period in BSC BSC6900 ional) Fine tuning period in the BSC 118201
antennas in two cells under one
BTS. A major lobe azimuth is
SET measured from the due north to
INCLUDEAN GCELLLCS(O the direction of the cell antenna in GBFD-
G Included Angle BSC6900 ptional) a clockwise rotation. 115402
ADD
In Port Cabinet BTSCONNEC Number of the in-port cabinet on a GBFD-
INCN No. BSC6900 T(Optional) BTS 111202
Whether to separate E1 from other
optical fibers for the use of other
devices. If this parameter is set to
The triggering of intra-cell F-H
YES, other BTSs can connect to
handovers must meet the P/N
SET the BSC6900 through the
criteria, that is, when the condition
Independent E1 BTSDOMUBP independent E1 port 3 of the GBFD-
for intra-cell F-H handovers is met
INDEN3 Port 3 BSC6900 (Optional) BTS3006C/BTS3002E. 111202
for P seconds during N seconds,
The triggering of intra-cell F-H
an intra-cell F-H handover is
handovers must meet the P/N
SET triggered. This parameter
criteria, that is, when the condition
Intracell F-H HO GCELLHOBA corresponds to the P in the P/N GBFD-
for intra-cell F-H handovers is met
INFHHOLAST Last Time BSC6900 SIC(Optional) criteria. 115504
for P seconds during N seconds,
an intra-cell F-H handover is
SET triggered. This parameter
Intracell F-H HO GCELLHOBA corresponds to the N in the P/N GBFD-
INFHHOSTAT Stat Time BSC6900 SIC(Optional) criteria. 115504
ADD
INFOEXCHG Info Exchange GNRNC(Man Information exchange content to MRFD-
LIST Content BSC6900 datory) be supported 211402
ADD
For an AMR call, if the currently
INFRA_RED_ Infrared alarm EMU(Optional MRFD-
occupied channel is a full rate
MASK switch BSC6900 ) Infrared alarm switch 210304
channel and the Radio Quality
Indication (RQI) is always higher
SET than the threshold set by this
For an AMR call, if the currently
F2H HO GCELLHOBA parameter, an intra-cell F-H GBFD-
occupied channel is a half rate
INHOF2HTH Threshold BSC6900 SIC(Optional) handover is triggered. 115504
channel and the Radio Quality
Indication (RQI) is always lower
SET than the threshold set by this
H2F HO GCELLHOBA parameter, an intra-cell H-F GBFD-
Power overload threshold for
INHOH2FTH Threshold BSC6900 SIC(Optional) handover is triggered. 115504
triggering incoming handover to
the TRX under the prerequisite
INHOPWROV Power Overload SET that the power amplifier of the TRX
ERLOADTHR Threshold In Ho. GTRXDEV(O provides the maximum output GBFD-
Initial coding mode used for full
ESHOLD In BSC6900 ptional) power. 111005
rate AMR calls. The four values 0,
1, 2, and 3 of this parameter
SET respectively represent the lowest,
AMR Starting GCELLCCAM low, high, and highest coding rates GBFD-
Initial coding mode used for half
INITCDMDF Mode[F] BSC6900 R(Optional) in the ACS. 115501
rate AMR calls. The four values 0,
1, 2, and 3 of this parameter
SET respectively represent the lowest,
AMR Starting GCELLCCAM low, high, and highest coding rates GBFD-
Initial coding mode used for
INITCDMDH Mode[H] BSC6900 R(Optional) in the ACS. 115502
broadband AMR calls. The three
values 0, 1 and 2 of this parameter
SET respectively represent the lowest,
INITCDMDW AMR Starting GCELLCCAM low and highest coding rates in the GBFD-
B Mode[WB] BSC6900 R(Optional) ACS. 115507
ADD
SEMILINK(Op Specifies the timeslot mask in GBFD-
INMASK In BSC Mask BSC6900 tional) BSC6900 114701
Whether to assign channel
requests in the overlay subcell to
the underlay subcell according to
"UL Subcell Lower Load
Threshold". If the load of the
underlay subcell is lower than "UL
SET Subcell Lower Load Threshold",
OL Subcell GCELLHOED incoming calls in the overlay
INNASSOPT Assignment BPARA(Optio subcell will be preferentially GBFD-
EN Optimization BSC6900 nal) assigned to the underlay subcell. 114402
SET
GCELLHOED
INNCELLEDG Inner Cell EDGE BPARA(Optio Whether to allow underlay-to- GBFD-
EHOEN HO Enable BSC6900 nal) overlay edge handovers 114402
ADD
BSC Inner Cell EXTNCELL(M MRFD-
INNCELLID Index BSC6900 andatory) Index of the cell in the BSC 210301
ADD
INNCELLNA BSC Inner Cell EXTNCELL(M MRFD-
ME Name BSC6900 andatory) Name of the cell in the BSC 210301
SET
Load HO of OL GCELLHOED
INNLOADHO Subcell to UL BPARA(Optio Whether to allow underlay-to- GBFD-
EN Subcell BSC6900 nal) overlay load handovers 114402
SET Overlay-to-underlay load
OL Subcell Load GCELLHOED handovers are performed by
INNLOADHO Diversity HO BPARA(Optio levels. This parameter indicates GBFD-
PERI Period BSC6900 nal) the duration of each level. 114402
SET
Step Length of GCELLHOED Level step during overlay-to-
INNLOADHO OL Subcell Load BPARA(Optio underlay hierarchical load GBFD-
In an enhanced dual-band
STEP HO BSC6900 nal) handovers 114402
network, if the load of the overlay
SET subcell is higher than this
Inner Cell GCELLHOED parameter, the system cannot
INNSERIOVE Serious BPARA(Optio initiate an underlay-to-overlay GBFD-
RLDTHRED OverLoad Thred BSC6900 nal) handover. 114402
ADD
SEMILINK(Ma GBFD-
INPN In BSC Port No. BSC6900 ndatory) Incoming BSC6900 port number 114701
ADD
BTSCONNEC GBFD-
INPN BTS In Port No. BSC6900 T(Mandatory) Number of a BTS port 111202
ADD
DXXTSEXGR
ELATION(Man GBFD-
INPORTNO DXX In Port No. BSC6900 datory) In-port number of a DXX 111203
ADD
SEMILINK(Ma GBFD-
INSN In BSC Slot No. BSC6900 ndatory) Incoming BSC6900 slot number 114701
ADD
BTSCONNEC Number of the in-port slot on a GBFD-
INSN In Port Slot No. BSC6900 T(Optional) BTS 111202
ADD
In BSC Subrack SEMILINK(Ma Incoming BSC6900 subrack GBFD-
INSRN No. BSC6900 ndatory) number 114701
ADD
In Port Subrack BTSCONNEC Number of the in-port subrack on a GBFD-
INSRN No. BSC6900 T(Optional) BTS 111202
ADD
Broadcast GSMSCB(Ma Time interval for sending a simple GBFD-
Hysteresis value during the
INT Interval BSC6900 ndatory) cell broadcast message 113602
handovers between cells on
different layers or of different GBFD-
Adjacent Cell ADD priorities. This value is used to 110601
INTELEVHOH Inter-layer HO G2GNCELL(O suppress inter-layer ping-pong GBFD-
YST Hysteresis BSC6900 ptional) handovers. 510501
Type of an interference band
Interfere Band SET statistics algorithm used when the
INTERBAND Stat Algorithm GCELLSOFT( frequency scanning function is GBFD-
STATALGO Type BSC6900 Optional) enabled 112401
Reduces ping-pong handovers GBFD-
ADD between cells on a same layer. 110601
INTERCELLH Inter-cell HO G2GNCELL(O This parameter is invalid when GBFD-
YST Hysteresis BSC6900 ptional) cells are on different layers. 510501
The triggering of interference
GBFD-
handovers must meet the P/N
SET Specifies an interval between two 110601
criteria, that is, when P out of N
INTERFEREH Penalty Time on GCELLHOFIT consecutive interference GBFD-
measurement reports meet the
OPENTIME Interfere HO BSC6900 PEN(Optional) handovers 510501
condition for interference
The triggering of interference
handovers, a concentric circle
handovers must meet the P/N
SET handover is triggered. This
criteria, that is, when P out of N
INTERFEREL Interfere HO GCELLHOBA parameter corresponds to the P in GBFD-
measurement reports meet the
ASTTIME Valid Time BSC6900 SIC(Optional) the P/N criteria. 510501
condition for interference
handovers, a concentric circle
SET handover is triggered. This
INTERFERES Interfere HO GCELLHOBA parameter corresponds to the N in GBFD-
TATTIME Static Time BSC6900 SIC(Optional) the P/N criteria. 510501
The BSS measures
classified the uplink
into five interference
helps the BSC6900 to assign
quality
levels.
Whether of the
The values radio channels
of these levels
channels.toAccording
allow the interference
to the
occupied
are calledby
handover MSs, and
interference
algorithm. calculates
band
Interference
Threshold used for interference
strength of interference signals,
and reportsare
thresholds.
handovers thetriggered
The interference
BTS determineswhen onthe
measurement.
the interference signals are
each
the of level
current
receive the interference
idle
is channels.
higher This
level
than the
The BSS measures
classified the uplink
into five interference
helps
based
receive the
on BSC6900
these
threshold to assign
thresholds,
while and
the levels
quality
levels. Theof the radio
values channels
of these
channels.
then reports
transmit According
quality a radio
is to the
resource
lower
occupied
are calledby
Threshold interference
used band the
MSs, and calculatesthan
for interference
strength
indication
interference ofmessage
interference
handover to thesignals,
quality GBFD-
and reports
thresholds. the interference
The BTS determines on
SET measurement.
the interference
BSC6900.
threshold, The
that signals
BSC6900
is, when are MSs
the 110601
each
the of the interference
current idle channels. This
level
INTERFHOE Interference HO GCELLHOBA The
are BSS measures
classified
compares
subject into
theto five
busy
all kindstheofuplink
interference
and idle
radio GBFD-
helps
based the
on BSC6900
these to assign
thresholds, and
N Allowed BSC6900 SIC(Optional) quality
levels.
channels of
The
interferences. the radio
values
reported channels
of
in these levels
the 510501
channels.
then reports According
a radio to the
resource
occupied
are calledby
measurement MSs,
interference
report and andcalculates
bandin the
Threshold
strength
indication used
ofmessage for interference
interference to thesignals,
and
radio reports
thresholds.
resource theindication
The interference
BTS determines on
message
SET measurement.
the interference
BSC6900.
Whether toThe signals
BSC6900
consider are
interference
each
the
to of the
current
determine idle channels.
interference
whether to This a
level
perform
INTERFPRIA Interf. Priority GCELLCHMG The BSS during
classified
compares
priorities measures
into
the five
busy the uplink
interference
and
channel idle GBFD-
helps
based
handover.the
on BSC6900
these
The to assign
thresholds,
interference and
band
LLOW Allowed BSC6900 AD(Optional) quality
levels.
channels
assignment of the
The radio
values
reported channels
of
in these levels
the 111005
channels.
then reports
statistics According
result a radio to the
resource
provides reference
occupied by MSs,
are called interference
measurement and
report and calculates
bandin the
strength
indication
for thresholdofmessage
interference
setting to thesignals,
and reports
thresholds.
radio resource the
The BTSand
interference
indicationdetermines on
message
Interference SET the interference
BSC6900.
interference The signals
BSC6900
analysis. For aredetails,
each
the
to of
current
determinethe idle channels.
interference
whether This
level
to perform a
INTERFTHRE Band Threshold GCELLOTHE classified
compares
see GSM into
the five
Rec. busy interference
08.08 and idle
helps
based
handover.the
on BSC6900
these
The toand
assign
thresholds,
interference
GSM
and
band
GBFD-
S0 0 BSC6900 XT(Optional) levels.
channels
Rec. The
08.58. values
reported of
in these
the levels 111005
channels.
then reports
statistics According
result a radio to the
resource
provides reference
are called interference
measurement report and bandin the
strength
indication
for thresholdofmessage
interference
setting to thesignals,
thresholds.
radio resource The BTSand
indicationdetermines
message
Interference SET the interference
BSC6900.
interference The signals
BSC6900
analysis. For aredetails,
thedetermine
to current interference
whether to level
perform a
INTERFTHRE Band Threshold GCELLOTHE classified
compares
see GSM into
the
Rec. five
busy interference
08.08 andand idle
GSM GBFD-
based on these
handover. The thresholds,
interference and
band
S1 1 BSC6900 XT(Optional) levels.
channels
Rec. The
08.58. values
reported of these levels
in the 111005
then reports
statistics result a radio resource
provides reference
are called interference
measurement report and bandin the
indication
for threshold message
setting to the
thresholds.
radio resource The BTSand
indicationdetermines
message
Interference SET BSC6900.
interference The BSC6900
analysis. For details,
the current interference
to determine whether to level perform a
INTERFTHRE Band Threshold GCELLOTHE compares
see GSM the busy
Rec. 08.08 andand idle
GSM GBFD-
based
handover. on these thresholds,
The interference and
band
S2 2 BSC6900 XT(Optional) channels
Rec. 08.58. reported in the 111005
then reports
statistics result a radio resource
provides reference
measurement report and in the
indication
for threshold message
setting to andthe
radio resource indication message
Interference SET BSC6900.
interferenceThe BSC6900
analysis. For details,
to determine whether to perform a
INTERFTHRE Band Threshold GCELLOTHE compares
see GSM Rec. the busy 08.08 andand idle
GSM GBFD-
handover. The interference band
S3 3 BSC6900 XT(Optional) channels
Rec. 08.58. reported in the 111005
statistics result provides reference
measurement report and in the
for threshold setting and
radio resource indication message
Interference SET interference analysis. For details,
to determine whether to perform a
INTERFTHRE Band Threshold GCELLOTHE see GSM Rec. 08.08 and GSM GBFD-
handover. The interference band
S4 4 BSC6900 XT(Optional) Rec. 08.58. 111005
statistics result provides reference
for threshold setting and
Interference SET Period duringanalysis.
interference which interference
For details,
Value of the timer for
INTERFTHRE Band Threshold GCELLOTHE levels
see GSM are Rec.
averaged. 08.08The and GSM GBFD-
synchronization between BSCs. If
S5 5 BSC6900 XT(Optional) interference
Rec. 08.58. levels on idle 111005
a BSC fails to synchronize with the
channels are averaged before the
BSC Interior control BSC before the timer
BTS sends a radio resource
Clock ADD expires, the BSC starts to
indication message to the
INTERIORSY Synchronize AISSCFG(Opt synchronize the BTSs under its GBFD-
BSC6900. The averaging result is
NCTMR Protect Time BSC6900 ional) control. 118201
used for classifying the
interference levels on idle
Interference SET channels into five interference
INTERPERIO Calculation GCELLOTHE bands. For details, see GSM Rec. GBFD-
D Period BSC6900 XT(Optional) 08.08, 08.58, and 12.21. 111005
GBFD-
Inter-RAT Cell SET This parameter specifies whether 114301
INTERRATCE Reselection GCELLHOBA the reselection from 2G cells to 3G GBFD-
LLRESELEN Enable BSC6900 SIC(Optional) cells is allowed. 114302
SET
InterRatCsSer Inter-RAT CS GCELLHOINT Threshold for setting the flag of
viceLoadHoT Service HO Load ERRATLDB(O accepting inter-RAT CS service MRFD-
hrd Threshold BSC6900 ptional) handover of a 2G cell 211402
GBFD-
SET This parameter specifies whether 114301
INTERRATIN Inter-RAT In BSC GCELLHOBA the handover from 3G cells to 2G GBFD-
BSCHOEN Handover Enable BSC6900 SIC(Optional) cells is allowed. 114302
SET When this parameter is set to
InterRATLoad Inter-RAT Load GCELLHOINT Width of load band
Service-based, [EcNo] during
the inter-RAT
HoEcNoBand HO Bandwidth ERRATLDB(O the inter-RAT
handover hierarchical
is triggered load-
on the basis MRFD-
Width [EcNo] BSC6900 ptional) based handover
of the service distribution. In this 211402
SET case, the target cell is selected
Inter-RAT Load GCELLHOINT according to the traffic load.
InterRATLoad HO EcNo at Start ERRATLDB(O Initial EcNo value of the inter-RAT MRFD-
HoEcNoStart Point BSC6900 ptional) When this
load-based parameter
handover bandis set to 211402
Load-based, the inter-RAT
SET handover is triggered on the basis
Inter-RAT GCELLHOINT Step
of theofload
changing
balance.theInEcNo value
this case,
InterRATLoad Hierarchy Load ERRATLDB(O during
the the cell
target inter-RAT hierarchical
is selected MRFD-
HoEcNoStep HO Step [EcNo] BSC6900 ptional) load-based
according tohandover
the traffic load on the 211402
SET target cell and the load difference
InterRATLoad Inter-RAT Load GCELLHOINT between 2G and
Width of load band3G[RSCP]
cells. during
HoRSCPBand HO Bandwidth ERRATLDB(O the inter-RAT hierarchical load- MRFD-
Width [RSCP] BSC6900 ptional) When this parameter is
based handover 211402
set to Dynamic Service/Load
SET based, the target cell is
Inter-RAT Load GCELLHOINT dynamically selected by using the
InterRATLoad HO RSCP at ERRATLDB(O Initial RSCP value
service-based of the or
algorithm inter-RAT
the MRFD-
HoRSCPStart Start Point BSC6900 ptional) load-based
load-based handover band
algorithm according to 211402
SET the traffic load on the cell.
Inter-RAT GCELLHOINT Step of changing the RSCP value
InterRATLoad Hierarchy Load ERRATLDB(O during the inter-RAT hierarchical MRFD-
HoRSCPStep HO Step [RSCP] BSC6900 ptional) When this parameter
load-based handover is set to CN 211402
Service-based, the inter-RAT
GBFD-
handover decision is made on the
Inter-RAT Out SET This parameter specifies whether 114301
basis of the service attribute of the
INTERRATOU BSC Handover GCELLHOBA the handover from 2G cells to 3G GBFD-
core network.
TBSCHOEN Enable BSC6900 SIC(Optional) cells is allowed. 114302
When this
SET parameter is set to OFF, no inter-
InterRatServic Allow Inter-RAT GCELLHOINT RAT service handover or inter-RAT
eLoadHoSwit Load HO in ERRATLDB(O load handover in the access state MRFD-
ch Access State BSC6900 ptional) is performed. 211402
Time span before the command is GBFD-
EXP executed. The logs generated 111203
LOG(Optional within the time span are to be MRFD-
INTERVAL Relative Time BSC6900 ) exported. 210305
STR
ETHOAMLOO
Send PKT PTST(Optiona Interval for sending packets to test GBFD-
INTERVAL Interval[s] BSC6900 l) Ethernet OAM loop 118630
SET Frequency index of the GBFD-
GCELLEXTM interference measurement in type 110801
INTFREQUE Interference SRPARA(Opti 3 of an extension measurement GBFD-
NCY Frequency BSC6900 onal) report 110802
Lower threshold of the overlay
level during underlay-to-overlay
SET handovers. When the receive level
The timer is used to set the time
Incoming OL GCELLHOED of an MS is higher than this
when the BSC6900 waits for an
INTOINNREX Subcell HO Level BPARA(Optio threshold, the MS can be switched GBFD-
Internal Handover Command
LEVTHRED TH BSC6900 nal) to the overlay subcell. 114402
message after a Internal Handover
Required message is reported in
Timer started after the BSC6900
INTRABSCC SET an internal BSC handover when A
delivers a handover command in
ODECHOCM GCELLTMR(O interface is IP. If the timer expires, GBFD-
an intra-BSC inter-cell handover. If
DTIMER T25 BSC6900 ptional) the internal BSC handover fails. 110601
the BSC6900 receives a handover
complete message before this GBFD-
SET timer expires, the timer stops. If 110601
INTRABSCH GCELLTMR(O this timer expires, the BSC6900 GBFD-
OTIMER T3103A BSC6900 ptional) considers the handover as failed. 510501
ADD
In BSC Start SEMILINK(Ma Incoming BSC6900 start timeslot GBFD-
INTSN Timeslot No. BSC6900 ndatory) number 114701
ADD
DXXTSEXGR
DXX In Time Slot ELATION(Man GBFD-
INTSNO No. BSC6900 datory) Number of a DXX In-timeslot 111203
Interval for executing the
scheduled subtask. If the time
Automatic switchover interval. This
ADD mode is set to "DAILY_C",
parameter needs to be set only
SUBTSK(Opti "WEEKLY_C", or "MONTHLY_C", GBFD-
when "OMU automatic switchover
INTV Time Interval BSC6900 onal) you should set this parameter. 111203
switch" is set to "ON". The
minimum automatic switchover
OMU Automatic SET interval is 30 days and the
Switchover ASWPARA(M maximum automatic switchover GBFD-
INTV Interval BSC6900 andatory) interval is 1024 days. 111203
SET
EXP
GCELLCCUT Whether a measurement report
INVALBSICE Invalid BSIC LOG(Optional
RANSYS(Opti can contain the information about GBFD-
N Reporting BSC6900 )onal) a cell with an invalid BSIC 117501
ADD
SNTPSRVINF
ADD
O(Mandatory)
XPUVLAN(Ma MRFD-
DLD
IP IP Address BSC6900 ndatory) IP address 210301
LICENSE(Ma
ndatory)
ULD
LICENSE(Ma GBFD-
IP IP Address BSC6900 ndatory) IP address of the server 111203
ADD
NSVLLOCAL(
DLD GBFD-
IP Local IP Address BSC6900 Mandatory)
RETANTCFG( IP address of the local NSVL 118603
Mandatory)
ULD
ADD
Remote IP BTSDEVFILE(
NSVLREMOT GBFD-
IP Address BSC6900 Mandatory)
E(Mandatory) IP address of the remote NSVL 118603
DLD
BTSPATCH(M
SET IP address of a BTS port. It cannot
andatory)
BTSETHPOR be the same as any IP address GBFD-
ULD IP address of the FTP server.
IP Physical IP BSC6900 T(Optional) configured in the BSC6900. 118601
BTSLOG(Man When the FTPServer.exe file is
datory) downloaded through the FTP Tool
DLD button on the LMT, the address of
BTSSW(Mand the FTP server is the same as that GBFD-
IP FTPServer IP BSC6900 atory) of the LMT client. 111202
The local IP address must be the
ADD configured IP address (including
IPPATH(Mand the IP address and port address of GBFD-
IPADDR Local IP address BSC6900 atory) the interface board). 118605
ADD
DEVIP(Manda MRFD-
IPADDR IP address BSC6900 tory) IP address of the board 211502
ADD
ETHIP(Manda Local IP address of the Ethernet MRFD-
IPADDR Local IP address BSC6900 tory) port 211502
ADD
Packet source IP ICMPGUARD( Source IP address of the packet
IPADDR address BSC6900 Mandatory) for preventing the ICMP attack None
ADD
Next Hop IP VLANID(Mand
IPADDR address. BSC6900 atory) IP address of the next hop None
ADD
ETHTRKIP(M Local IP address of the MRFD-
IPADDR Local IP address BSC6900 andatory) aggregation group 210103
ADD
SGSNROUTE
INFO(Mandat GBFD-
IPADDR IP Address BSC6900 ory) IP address of the router 118603
ADD
SGSN(Manda GBFD-
IPADDR1 IP Address1 BSC6900 tory) First IP address of the SGSN 118603
SET It must be the valid address of the
Master Clock BTSIPCLKPA A, B, or C type and cannot be the
Server IP RA(Mandatory broadcast address or network GBFD-
IPADDR1 Address BSC6900 ) address. 118606
ADD
SGSN(Option GBFD-
IPADDR2 IP Address2 BSC6900 al) Second IP address of the SGSN 118603
SET It must be the valid address of the
Slave Clock BTSIPCLKPA A, B, or C type and cannot be the
Server IP RA(Mandatory broadcast address or network GBFD-
IPADDR2 Address BSC6900 ) address. 118606
ADD
SGSN(Option GBFD-
IPADDR3 IP Address3 BSC6900 al) Third IP address of the SGSN 118603
SET
BTSETHPOR
ADD
T(Optional)
SGSN(Option GBFD-
ADD
IPADDR4 IP Address4 BSC6900 al) Fourth IP address of the SGSN 118603
BTSPPPLNK(
SET
Optional) When the number of error frames
BTSETHPOR
ADD on the IP layer reaches the value
T(Optional)
IP Frame Error BTSMPGRP( of this parameter, the frame error GBFD-
ADD
IPEAAT Alarm Threshold BSC6900 Optional) alarm is generated. 118630
BTSPPPLNK(
Optional) When the number of error frames
IP Frame Error ADD on the IP layer decreases to the
Alarm Clearance BTSMPGRP( value of this parameter, the frame GBFD-
IPEADT Threshold BSC6900 Optional) error alarm is cleared. 118630
GBFD-
ADD 118611
PPPLNK(Opti Whether to compress the packet GBFD-
IPHC Head compress BSC6900 onal) headers 118622
GBFD-
ADD 118611
MPGRP(Optio Whether to compress the IP GBFD-
IPHC Head compress BSC6900 nal) header of a MP group 118622
ADD
ETHIP(Manda IP address index of the Ethernet
IPINDEX IP address index BSC6900 tory) port None
ADD
ETHTRKIP(M IP address index of the MRFD-
IPINDEX IP address index BSC6900 andatory) aggregation group 210103
GBFD-
ADD 118604
IPMUX(Option GBFD-
IPMUXINDEX IP MUX Index BSC6900 al) IP packet multiplex index 118610
ADD
IPPHYTRANS IP Physical Tran. BTSAUTOPL Type of IP physical transmission GBFD-
Whether to enable the heater.
TYPE Type BSC6900 AN(Optional) cable medium, E1 or FE/GE. 118601
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
ISADDEDTM DHEU Heater BTSDHEUBP( the corresponding parameter in GBFD-
PCONTROL Control Allowed BSC6900 Optional) another mode. 111202
ADD
AISSCFG(Ma Whether the BSC is a reference GBFD-
ISBASICBSC Base BSC BSC6900 ndatory) BSC 118201
ADD
ISCHAINNCE Chain Neighbor G2GNCELL(O Whether the cell is a chain GBFD-
LL Cell BSC6900 ptional) neighboring cell 510103
SET
BTSIPCLKPA
ISCLKREDU Clock Server RA(Mandatory Whether to support clock server GBFD-
CY Redundancy BSC6900 ) redundancy configuration 118606
SET
BTSIPCLKPA
ISCLKREDU Clock Server RA(Mandatory Whether to support clock server GBFD-
CYBAK Redundancy BSC6900 ) redundancy configuration 118606
If this parameter is set to "YES",
the check threshold for a specific
Whether to enable the BTS to
board is used. In this case, the
ISCONFIGED ADD support ring networking. IP BTS do GBFD-
following paramters are involved:
RING Config Ring BSC6900 BTS(Optional) not support this parameter. 117801
Forward Bandwidth, Receive
Bandwidth, Power Class, TRX
Is Configure ADD Number. If this parameter is set to
ISCONFIGTH Check BTSRXUBRD "NO", the check threshold for a GBFD-
D Threadhold BSC6900 (Optional) certain class of boards is used. 111202
ADD
Is Main BCCH GTRX(Option Whether to enable the TRX to MRFD-
ISMAINBCCH TRX BSC6900 al) carry the main BCCH in the cell 210301
SET
BSCBASIC(M Whether a BSC in the TC pool is GBFD-
Whether this location group is the
IsMainBSC Is Main BSC BSC6900 andatory) the primary BSC 113726
main location group. If the value is
Yes, this location group is the main
ADD location group. If the value is No,
ISMAINLOCG Is Main Local BTSLOCGRP Configuration modeisofthe
this location group theslave
IP GBFD-
RP Group BSC6900 (Mandatory) subnetwork. Static configuration:
location group. 510104
fixed local NSVL and remote NSVL
parameters through manual
NC2 Support in ADD A service support attribute of a cell,
configuration; Dynamic
ISNC2SUPP External GEXT2GCEL that is, whether an external GSM GBFD-
configuration: the NSVL parameter
ORT Neighbour Cell BSC6900 L(Optional) cell supports NC2 116201
obtained through negotiation
between the BSC and the SGSN
after the local NSVL and SGSN
Subnetwork ADD service point are configured GBFD-
ISNCMODE Configure Mode BSC6900 NSE(Optional) manually. 118603
GBFD-
ADD 118604
IPMUX(Mand GBFD-
ISQOSPATH IS QOSPATH BSC6900 atory) Whether it is QOSPATH 118610
SET
IsSupportTcP Is Support Tc BSCBASIC(O Whether to support the TC pool GBFD-
ool Pool BSC6900 ptional)
SET function 113726
Whether it is a TC board.If the
GCELLIDLEF board is for the TC subrack, set
DDBA1(Mand
ADD the parameter to YES.
atory)
BRD(Mandato If the board is not for the TC MRFD-
ISTCBRD TC board BSC6900 SET
ry) Whether
subrack, tosetcontrol the temperature
the parameter to NO. 210301
GCELLIDLET difference between the air inlet and
DDBA1(Mand air outlet and that between the air
ADD
atory) outlet and ambient by the
ISTCCENTRA Remote TC SUBRACK(O
SET Whether the subrack is a remote MRFD-
temperature control system.
L Central BSC6900 ptional)
SET
GCELL2GBA main TC subrack 210301
In multi-mode scenario, the value
GCELLIDLEF
1(Mandatory) of this parameter in one mode
DHEU DDBA1(Mand
SET must be the same as the value of
Temperature atory)
GCELLHO2G
BTSDHEUBP( the corresponding parameter in GBFD-
ISTMPCTRL Control BSC6900 SET
BA2(Mandator
Optional) another mode. 111202
GCELLIDLET Whether to configure the
y)
DDBA1(Mand transmission cabinet. The BTS
SET
SET
atory) uses this parameter to calculate
GCELLHOFD
ISTRANCAB Tran. Cabinet BTSPSUFP(O
SET the number of TRXs to be shut GBFD-
DBA2(Mandat
CON Configured BSC6900 ptional)
GCELL2GBA down. 111202
ory)
1(Mandatory)
SET
SET
GCELLHOTD
GCELLHO2G
DBA2(Mandat Number of a row to be changed in MRFD-
ITEM NCCELL No. BSC6900 BA2(Mandator
ory) a BA list 210301
y)
Reserved parameter for cells.
SET
SET There are 30 parameters of this
GCELLHOFD
GCELLREV( type, which can be used as new MRFD-
DBA2(Mandat
ITEMINDEX Item Index BSC6900 Mandatory) parameters in later versions. 210301
ory)
SET
GCELLHOTD
DBA2(Mandat MRFD-
ITEMVALID Item Valid BSC6900 ory) Used for parameter control 210301
SET
GCELLREV( Value of a reserved parameter for MRFD-
ITEMVALUE Value BSC6900 Mandatory) cells 210301
ADD
IPPATH(Mand
atory)
ADD Whether a cell is a normal cell,
ADJMAP(Man concentric cell, or enhanced dual
Type
band of the interface.
network cell. This is
datory)
determined
In a concentric cell, the of
by the type the
coverage
ADD
protocol
areas of currently
different TRXs used by formthe
TRMMAP(Ma GBFD-
BTS. Point-to-Point
concentric circles of Protocol
different (PPP)
ITFT Interface Type BSC6900 ndatory) Type of the adjacent node 118605
is a data
radiuses. link protocol. Multilink
Concentric cell attributes of TRX. If
PPP
Owing (MP)different
is a bandwidth-on-
the celltowhere a TRX coverage
is locatedareas is
ADD demand
of protocol
the overlaid that binds parts,
configured as aand underlaid
concentric cell, set
BTSIPRT(Man multiple
the links together according to GBFD-
this two parts
parameter can be logically
to OVERLAID or
ITFType Interface Type BSC6900 datory) PPP (alsoas
regarded called
two link aggregation).
cells. WithIf many 118605
UNDERLAID as required. the
channels,
cell where the a TRX overlaid part isisthe
is located not
SET major trafficas
configured bearer layer, recruiting
a concentric cell, the
Concentric GTRXIUO(Ma most
default MSs
value in its
of coverage area.is
this parameter GBFD-
IUO Attribute BSC6900 ndatory) The
NONE. underlaid part is used for 113201
Dynamic coverage, providing servicescirclefor
The triggering of concentric
Channel the areas that themeet
overlaid part
handovers must the P/N
Conversion SET cannot
criteria,cover.
that is,The whenunderlaid
P out ofpart N
IUOCHNTRA Parameter of GCELLPSCH Conversion
covers policy ofpart,
the overlaid the and
dynamicthus GBFD-
measurement reports meet the
N Concentric Cell BSC6900 M(Optional) channel
the of thepart
underlaid concentric
can also cell
share 113201
condition for concentric circle
The triggering of concentric circle
some traffic.a concentric circle
handovers,
handovers must meet the P/N
SET An enhanced
handover dual band
is triggered. network is
This
criteria, that is, when P out of N
IUOHODURA UO HO Valid GCELLHOIU amelioration
parameter correspondsto the existing dual
to the P in GBFD-
measurement reports meet the
TIME Time BSC6900 O(Optional) band
the P/N network.
criteria.In such a network, 113201
condition for concentric circle
two cells physically with a
handovers, a concentric circle
collocation site but different
SET handover is triggered. This
coverage areas form a cell group
IUOHOSTATI UO HO Watch GCELLHOIU parameter corresponds to the N in GBFD-
logically, namely, an inner cell and
ME Time BSC6900 O(Optional) the P/N criteria. 113201
an extra cell. Channel resource
sharing and cell load balancing is GBFD-
ADD realized in the two cells through 113201
GCELL(Optio the algorithm of enhanced dual GBFD-
IUOTP Cell IUO Type BSC6900 nal) band network. 114402
J0 trace
J0ALMSWITC mismatch alarm SET Switch for the J0 tracing mark
H switch BSC6900 OPT(Optional) mismatching alarm None
SET
Expected receiving value of J0. J0
J0BYTE_FOR OPT(Mandato
byte, also called the trace byte of
MAT J0 Byte Format BSC6900 ry) Sending value
Byte display of J0.ofJ0
format J0byte, also None
the regenerator section on the
called the trace byte of the
optical port (RTIM), is one of the
regenerator section on the optical
optical port interconnection
port (RTIM), is one of the optical
J0 expected SET parameters. The BSC receives the
port interconnection parameters
J0RXVALUE incept value BSC6900 OPT(Optional) peer J0 byte continuously. None
that is continuously transmitted to
the peer end. This parameter
enables the peer end to check
SET whether it is connected to the local
J0TXVALUE J0 transmit value BSC6900 OPT(Optional) end continuously. None
SET
J0TYPE J0 type BSC6900 OPT(Optional) J0 type None
J1 trace
J1ALMSWITC mismatch alarm SET Switch for the J1 tracing mark
H switch BSC6900 OPT(Optional) mismatching alarm None
SET
Expected receiving value of J1. J1
J1BYTE_FOR OPT(Mandato
byte, also called the trace byte of
MAT J1 Byte Format BSC6900 ry) Sending value
Byte display of J1.ofJ1
format J1byte, also None
the high-order path on the optical
called the trace byte of the high-
port, is one of the optical port
order path on the optical port, is
interconnection parameters. The
one of the optical port
J1 expected SET local end continuously receives the
interconnection parameters
J1RXVALUE incept value BSC6900 OPT(Optional) peer J1 byte. None
transmitted to the peer end
continuously. This parameter
enables the peer end to check
SET whether it is connected to the local
J1TXVALUE J1 transmit value BSC6900 OPT(Optional) end continuously. None
SET
J1TYPE J1 type BSC6900 OPT(Optional) J1 type None
SET
J2ALMSWITC J2 mismatch COPTLNK(Op Switch for the J2 tracing mark
H alarm switch BSC6900 tional) mismatching alarm None
SET
J2BYTE_FOR COPTLNK(Op
MAT J2 Byte Format BSC6900 tional) Byte display format of J2 None
SET
COPTLNK(Op
J2MODE J2 length BSC6900 tional) Byte length of J2 None
SET
J2 expected COPTLNK(Op
J2RXVALUE incept value BSC6900 tional) Expected receiving value of J2 None
A zero or a space used to fill in the
J byte of the optical port based on
SET Whether to enable the LAPD Jitter
the J byte of the peer equipment. If
COPTLNK(Op Buffer algorithm. This algorithm
the J bytes are inconsistent, an
J2TXVALUE J2 transmit value BSC6900 tional) adds a buffering
Sending value ofadaptation
J2 layer None
SET alarm related to J byte mismatch
under the LAPD layer at the
OPT(Optional) will be reported and the negotiation
receiving end. The function at this
SET of the optical port may fail, thus
layer is to delay the I frame (first
Automatic COPTLNK(Op leading to deterioration of the
received, last sent) currently
JAUTOADD Append J Byte BSC6900 tional) services. None
received. If an I frame is received
within the delayed duration, the
SET frame is sent to the LAPD layer. In
LAPD Jitter BTSJBF(Man this way, the frame disorder is GBFD-
JBF Buffer Algorithm BSC6900 datory) avoided. 118401
Default receive delay of the PS
Jitter Buffer on the BTS. A greater
SET value of this parameter indicates a
JITBUFDELA PS Jitter Buffer BTSOTHPAR
ADD longer end-to-end delay for the PS GBFD-
Y Delay BSC6900 A(Optional)
GCELL(Mand service. 111612
atory)
ADD
SET
JITBUFSWIT Jitter Buffer GEXT2GCEL
OTHSOFTPA Whether the LAPD Jitter Buffer is GBFD-
CH switch BSC6900 L(Mandatory)
RA(Optional) enabled on the BSC side 118601
ADD
GEXT3GCEL K offset used in K sequencing. To
SET
L(Mandatory) Determines whether the last three
reduce ping-pong handovers, the
MSP(Optional
SET bits of K2 indicates the single end GBFD-
system performs K sorting based
K2MODE K2 Mode BSC6900 )FHO(Mandato and the dual end 111701
on the downlink receive level of the
ry) candidate cells. But before doing GBFD-
ADD
SET that, the system subtracts "K Bias" 110601
BTSAUTOPL
GCELLHOAD from the actual downlink receive GBFD-
ADD
KBIAS K Bias BSC6900 AN(Mandatory
(Optional) Location area
level of the code (LAC).
candidate cells.MSs 510501
PPPLNK(Opti
) can freely move in the local
onal) GBFD-
SET location area with no need of
ADD 118611
BTSAUTOPL location update. Reasonable local
Keep-alive timer MPLNK(Optio Duration of the PPP/MP link keep- GBFD-
ANCFG(Optio allocation can effectively lighten
KEEPALIVE length[S] BSC6900 nal) alive timer 118622
nal) the signaling load and improve the
ADD call completion rate.
GCELLQUICK Can be input in hexadecimal
Location area code (LAC). The MS
SETUP(Mand format. The hexadecimal format is MRFD-
can move within the local location
LAC Cell LAC BSC6900 atory) H'****, for example, H'1214. 210301
area without location update. The
SET reasonable classification of the
BTSAUTOPL location area is very important for
ANCFG(Optio reducing the signaling load and GBFD-
LAC1 Cell LAC BSC6900 nal) improving the put-through rate. 510702
Aggregation mode. When this
parameter is set to static
ADD aggregation, the LACP protocol is
Aggregation ETHTRK(Man activated; otherwise, the LACP MRFD-
LACPMODE Mode BSC6900 datory) protocol is deactivated. 210103
ADD
GPS antenna GPS(Mandato Longitude of the GPS receiver
LATITUDE latitude BSC6900 ry) antenna None
Delay statistics period. This
parameter indicates the period to
ADD Number of delay adjustment
collect the statistics information
LATITUDESE GPS antenna GPS(Mandato suspension
Longitude ofperiods.
the GPSThisreceiver
about the link transmission delay.
C latitude BSC6900 ry) parameter
antenna specifies the delay None
Note that the unit of this parameter
statistics periods in which the
is 100 milliseconds. The actual
bandwidth is not adjusted when
ADD delay statistics period is the value
the bandwidth adjustment function
Delay measure IPLOGICPOR of this parameter multiplied by 100 GBFD-
of the logical port is triggered due
LATPRD period [100ms] BSC6900 T(Optional) milliseconds. 118605
to the change of the link
transmission delay. This parameter
Delay adjust ADD can be used to control the rate of
suspend period IPLOGICPOR the bandwidth adjustment at the GBFD-
Bandwidth reduction delay
LATSUSTM [LATTH] BSC6900 T(Optional) logical port. 118605
threshold. This parameter is used
to trigger the function of bandwidth
Rate down ADD reduction at the logical port when
threshold for IPLOGICPOR the link delay exceeds the value of GBFD-
LATTH delay [ms] BSC6900 T(Optional) this parameter. 118605
SET GBFD-
LDRFOUH LDR Fourth BSC6900 LDR(Optional) Fourth action taken for load control 118601
SET GBFD-
LDRFST LDR First BSC6900 LDR(Optional) First action taken for load control 118601
COL
LOG(Optional GBFD-
LEVEL Log Level BSC6900 ) Log level to be collected. 111203
SET
Alarm Mask ALMML(Mand
LEVEL Switch BSC6900 atory) alarm mask switch. None
ADD
ETHMD(Optio GBFD-
Level MD LEVEL BSC6900 nal) Whether
Class to allow
of the inter-layer and
maintenance
Hysteresis value during thedomain 118630
inter-level handovers. The inter-
SET handovers between cells on GBFD-
layer and inter-level handover
GCELLBASIC different layers or of different 110801
algorithm is achieved through the
Level Report PARA(Option priorities.
Whether to This valuethe
support is used to of
reporting GBFD-
setting of different layers and
LEVELRPT Switch BSC6900 al) suppress inter-layer
the main diversity ping-pong
level 110802
priorities for cells, which switches
handovers.
traffic to cells of a higher GBFD-
Inter-layer handover threshold of
SET precedence (decided by "Layer of 110601
the serving cell = "Inter-layer HO
Level HO GCELLHOBA the cell" and "Cell priority" GBFD-
threshold" - "Inter-layer HO
LEVHOEN Allowed BSC6900 SIC(Optional) together). 510501
Hysteresis";
Inter-layer handover threshold of a GBFD-
SET neighboring cell = "Inter-layer HO 110601
Inter-layer HO GCELLHOBA threshold" + "Adjacent Cell Inter- GBFD-
LEVHOHYST Hysteresis BSC6900 SIC(Optional) layer HO Hysteresis" - 64. 510501
Optical STM-1/OC-3 interface
GbIP:FG2a/GbIP GSM BSC Gb IP
interface
The triggering of inter-layer
Abis_TDM:EIUa/Abis_TDM
handovers must meet the P/N E1/T1
circuit
criteria,Interface for the condition
that is, when
Abis,OIUa/Abis_TDM
for inter-layer handovers channelized
is met for
Optical STM-1PInterface
a consecutive secondsfor Abis N
during
The triggering of inter-layer
Ater_TDM:EIUa/Ater_TDM
seconds, an inter-layer handover E1/T1is GBFD-
handovers must meet the P/N
ADD circuit Interface
triggered. for
This parameter 110601
criteria, that is, when the condition
Layer HO Valid G2GNCELL(O Ater,OIUa/Ater_TDM
corresponds to the P channelized
in the P/N GBFD-
for inter-layer handovers is met for
LEVLAST Time BSC6900 ptional) Optical
criteria. STM-1 Interface for Ater 510501
a consecutive P seconds during N
Pb_TDM:EIUa/Pb_TDM E1/T1
seconds, an inter-layer handover is GBFD-
circuit Interface for
ADD triggered. This parameter 110601
Pb,OIUa/Pb_TDM channelized
Layer HO Watch G2GNCELL(O corresponds to the N in the P/N GBFD-
Optical STM-1 Interface for Pb
LEVSTAT Time BSC6900 ptional) criteria. 510501
A_TDM:EIUa/A_TDM E1/T1 circuit
CON
Interface for A OIUa/A_TDM
PATCH(Optio
ADD channelized Optical STM-1
nal)
LGCAPPTYP Logical function BRD(Optional Interface for A MRFD-
LOD
E type BSC6900 ) SAU:Service Aware Uint 210301
PATCH(Optio
nal)
LOD
LGCAPPTYP Logical function BRD(Optional MRFD-
ADD
E type BSC6900 ) Logical function type of the board 210301
PPPLNK(Man
datory) GBFD-
ADD 118611
LGCAPPTYP Logic function MPGRP(Man GBFD-
E type BSC6900 datory) Logical function type 118622
SET
ALMPORT(Op MRFD-
LL Lower Limit BSC6900 tional) Lower limit for triggering an alarm 210304
SET
BTSENVALM
PORT(Option Lower limit of an alarm. It is valid MRFD-
LL Lower Limit BSC6900 al) for the analog port. 210301
The loopback channel number
SET when the port loopback mode is
E1T1LOP(Opt set to single channel local
Upper threshold of the low noise
LLCN Channel No. BSC6900 ional) loopback None
amplifier. When the working
voltage of the low noise amplifier
SET attenuator in the RXU board is
BTSRXUBP( smaller than this value, an alarm is GBFD-
Lower threshold of the low noise
LNA1 LNA Threshold1 BSC6900 Optional) reported by the BTS. 111202
amplifier. When the working
voltage of the low noise amplifier
SET attenuator in the RXU board is
BTSRXUBP( greater than this value, an alarm is GBFD-
LNA2 LNA Threshold2 BSC6900 Optional) reported by the BTS. 111202
Optical interface tributary
numbering method. This
LNKNUMMO Tributary SET parameter indicates the sequence
DE Numbering BSC6900 OPT(Optional) Signaling
of linkinmask
tributaries an In corresponding
SDH
Link load sharing. theframe.
value, the None
to the M3UA link set. It is used for
number of 1s (represented by n)
the M3UA link load sharing. It is
ADD determines the maximum number
valid only when the working mode
Semipermanent SEMILINK(Op (2^n) of links for the load sharing. GBFD-
of the bearing
Initial signaling link
tag of set
theisM3UA
set tolink.
LNKRATE Link Rate BSC6900 tional) For
Rate example, B0000 indicates
of the semipermanent linkthat 114701
load
This parameter can be set the
sharing. In the value, to either
up to one link is used for the load
number
active mode of 1sor(represented
standby mode. by n)For
sharing, B0001 and B1000
ADD determines
details aboutthe themaximum number
relevant bearer
indicate that up to two links are
LNKREDFLA Initial bearing M3LNK(Optio (2^n)
tag, seeof links
the thefor parameter
the load sharing.
"Traffic GBFD-
used for the load sharing. The
G traffic active tag BSC6900 nal) For
mode" example, B0000M3LKS".
of the "ADD indicates that 118602
additional links are not used for the
up to one link is used for the load
load sharing. The AND operation
sharing, B0001 and B1000
ADD between this value and " signaling
indicate that up to two links are
LNKSLSMAS Signalling link MTP3LKS(Op route mask " in the N7DPC is GBFD-
used for the load sharing. The
K mask BSC6900 tional) equal to 0. 111804
additional links are not used for the
ADD
load sharing. The AND operation
GEXT2GCEL
ADD between this value and " signaling
L(Optional)
LNKSLSMAS Signalling link M3LKS(Optio route mask " in the "ADD N7DPC" GBFD-
ADD If the load of a cell is lower than
K mask BSC6900 nal) is equal to 0. 118602
GEXT3GCEL the value of this parameter, the cell
L(Optional) can admit the users handed over GBFD-
Load handover SET from other cells with higher load. 110601
LoadAccThre Load Accept GCELLHOAD Otherwise, the cell rejects such GBFD-
s Threshold BSC6900 (Optional) users. 510501
Intervals that the BSC broadcasts
Type of load balancing algorithm of
a cell's traffic load to its neighbor
the MSC Pool. Generally, the
cells. The uplink load and downlink
BSC6900 chooses an MSC
load indicate the traffic situation of
according to the obtained network
a cell. The uplink load = number of
resource indication (NRI). In some
uplink TBFs carried on all PDCHs
cases, however, the BSC6900
in a cell / total number of PDCHs in
cannot do so. Instead, the
a cell x ("PDCH Uplink Multiplex
MSC Pool Load ADD BSC6900
This chooses
parameter a target MSC a
Threshold"/10) xspecifies
100%. The whether
LOADBALAN Balancing GCNOPERAT according
traffic to a
load-sharing load balancing
handover GBFD-
downlink load = number of is
CEALG Algorithm Select BSC6900 OR(Optional) algorithm.
enabled. 117401
downlink The TBFsload handover
carried on all helps
SET to reduce
PDCHs in cell congestion,
a cell / total number improveof
LOADBROAD BSCPSSOFT success
PDCHs inrate of channel
a cell x ("PDCH
CASTPERIO NC2 Load PARA(Option assignment,
Downlink Multiplex and balance the traffic
Threshold"/10) GBFD-
D Broadcast Period BSC6900 al) load
x 100%. among cells, thus improving 116201
the network performance. The load
handover is used as an emergency
SET
measure instead of a primary
LOADCURRE Load Current BTSPMUBP( GBFD-
measure to adjust abnormal traffic
NTDIV Shunt Coefficient BSC6900 Optional) Load current shunt coefficient 111202
burst in partial areas. If load
handovers occur frequently in a GBFD-
SET partial area, the cell and TRX 110601
Load Handover GCELLHOBA configuration of BTSs and the GBFD-
Indicates that if a 2G neighboring
LoadHoEn Support BSC6900 SIC(Optional) network layout should be adjusted. 510501
cell supports load handovers, the
BSC adds the load information of GBFD-
ADD the local cells in the signaling 110601
LoadHoEnExt Load Handover GEXT2GCEL procedures related to this GBFD-
Indicates that if a 3G neighboring
2G Support BSC6900 L(Optional) neighboring cell. 510501
cell supports load handovers, the
BSC adds the load information of GBFD-
After a load handover succeeds,
ADD the
When local
thecells
loadinofthe athe signaling
cell reaches or 110601
the BSC punishes former
LoadHoEnExt Load Handover GEXT3GCEL procedures
exceedscell related
"Load to
HO"Penalty this
Threshold", GBFD-
serving during Timeall
3G Support BSC6900 L(Optional) neighboring
the thatcell.
calls HO" are using this cell as 510501
on Load by subtracting
the serving
"Penalty cell on
Value generate
Load HO" handover
from GBFD-
After a load handover succeeds,
SET requests
the receive at level
the same of thetime,
former which 110601
the BSC punishes the former
LOADHOPEN Penalty Time on GCELLHOFIT will suddenly
serving increase
cell, thus avoidingthe load
ping-of GBFD-
serving cell during "Penalty Time
TIME Load HO BSC6900 PEN(Optional) the
pong processor.
handovers. Under some 510501
on Load HO" by subtracting
circumstances, congestion occurs
In hierarchical
"Penalty Value load
on Loadhandovers,
HO" from GBFD-
In handover
in the cell, whichalgorithm
will resultofinthe call
SET starting
the fromlevel
receive "Edge of HOformer
the DL 110601
first
drop.generation,
To solve this load handovers
problem, the
LOADHOPEN Penalty Value on GCELLHOFIT RX_LEV
serving Threshold",
cell, thus avoiding a "Load ping-HO GBFD-
can
BSCbe performed
uses only when
the hierarchical the
load
VALUE Load HO BSC6900 PEN(Optional) Step
pong Level" is added to the upper
handovers. 510501
receive
handover level of the current
algorithm to control serving
the
handover threshold after every
cell
numberis in of
theusers
range "Edge HO
included DL
in each GBFD-
"Load HO Step Period". In this
SET RX_LEV Threshold" to "Edge HO
level of handovers. 110601
way, all the calls in the current
LOADHOPER Load HO Step GCELLHOAD DL
ThisRX_LEV
parameter Threshold"
indicates+the "Load GBFD-
serving cell whose receive level is
IOD Period BSC6900 (Optional) HO Bandwidth".
duration of each handover level. 510501
in the range "Edge HO DL
In the handover algorithm of the
RX_LEV Threshold" to "Edge HO GBFD-
second generation, load
SET DL RX_LEV Threshold" + "Load 110601
handovers can be performed only
LOADHOSTE Load HO Step GCELLHOAD HO Bandwidth" are switched to GBFD-
when the level difference between
P Level BSC6900 (Optional) other cells. 510501
the neighboring cell and the
serving cell is between "Inter-cell GBFD-
SET HO Hysteresis" - "Load HO 110601
LOADOFFSE Load HO GCELLHOAD Bandwidth" and "Inter-cell HO GBFD-
Whether to enable load power-off.
T Bandwidth BSC6900 (Optional) Hysteresis". 510501
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
LOADPWRO Load Power-off BTSDPMUBP the corresponding parameter in GBFD-
FFEN Allowed State BSC6900 (Optional) another mode. 111202
Whether to allow the cell load
reselection. If this parameter is set
to PERMIT and "NC2 Load
Reselection Switch" is set to
Cell Load SET Support, the load of the target cell
LOADRESEL Reselection GCELLNC2P is involved in the algorithm for NC2 GBFD-
Threshold for allowing the MS to
ALLOW Allowed BSC6900 ARA(Optional) cell reselection. 116201
reselect a cell during load
reelection. When the receive level
SET of the serving cell is lower than this
LOADRESEL Load Reselect GCELLNC2P threshold, the load reselection is GBFD-
MAXRXLEV Level Threshold BSC6900 ARA(Optional) triggered. 116201
When the uplink load or downlink
load of the target cell is lower than
Load Reselection SET this threshold, it can accept the
LOADRESEL Receive GCELLNC2P MSs from the serving cell due to GBFD-
RXTHRSH Threshold BSC6900 ARA(Optional) load reselection. 116201
When the uplink load or downlink
If this parameter is set to YES, the
LOADRESEL SET load of the cell exceeds this
channel assignment algorithm II
STARTTHRS Load Reselection GCELLNC2P threshold, the load reselection GBFD-
randomly selects the start range
H Start Threshold BSC6900 ARA(Optional)decision is made. 116201
for channel traversal; otherwise,
the algorithm selects the channel
SET next to the channel assigned last
LOADSHARE Balance Traffic GCELLCHMG time as the start point of channel GBFD-
ALLOW Allowed BSC6900 AD(Optional) traversal. 111005
SET
BSCABISPRI
TRM Load MAP(Optional GBFD-
LOADTHSW Threshold switch BSC6900 ) TRM load threshold switch 111202
SET
GBSCREDGR GBFD-
LocalBSCID Local BSC ID BSC6900 P(Mandatory) Local BSC identity 113725
GBFD-
ADD Local IP address of PPP link. The 118611
PPPLNK(Man IP address of the PPP link on the GBFD-
LOCALIP Local IP address BSC6900 datory) BSC side. 118622
GBFD-
ADD 118611
MPGRP(Man GBFD-
LOCALIP Local IP address BSC6900 datory) Local IP address of the MP group 118622
ADD
BTSPPPLNK( GBFD-
LOCALIP Local IP Address BSC6900 Mandatory) Local IP address of BTS PPP Link. 118611
ADD
BTSMPGRP( Local IP address of BTS MLPPP GBFD-
LOCALIP Local IP Address BSC6900 Mandatory) Group. 118611
ADD
NSVLLOCAL( GBFD-
LOCALNSVLI Local NSVL ID BSC6900 Mandatory) Identifies a local NSVL 118603
The value of this parameter can
include one or two conditions.
ADD "&" is used to concatenate the
BTSLOCGRP conditions, and the records are
ADD obtained when the two conditions
(Mandatory)
SGSNROUTE are matched.
ADD
LOCALPORT INFO(Mandat Identifies
Conditionsthearelocal portinofthe
written theformat GBFD-
BTSRXU2LO
NO Local Port No. BSC6900 ory) router
of "name : value". 118603
CGRP(Manda
tory) "name" is the key of location
SWP information,
Number of the "value" is the
location value of
group
Location Group BTSLOCGRP location
under the information.
BTS. It is unique for GBFD-
LOCGRPNO No. BSC6900 (Mandatory) Both
each "name"
BTS. and "value" are case 510104
sensitive.
ADD
For example: 1. If you need to
BTSOBJALM
obtain all the alarms regarding the
Location Group SHLD(Mandat GBFD-
EXP subrack 0, set lockeyinfo to
LOCGRPNO No. BSC6900 ory) Number of a location group 510104
ALMLOG(Opti "Subrack No : 0".
onal) For example: 2. If you need to
STA obtain all the alarms regarding the
LOCINFOKE Filter of Location ALMLOG(Opti slot 8 in subrack 0, set lockeyinfo MRFD-
Identifies the first local IP address
Y Information BSC6900 onal) to "Subrack No : 0&Slot No : 8". 210304
that communicates with the peer
end. When it is set to 0, it is
ADD invalid. This IP address must be
First local IP SCTPLNK(Ma first configured on the GBFD-
Identifies the second local IP
LOCIP1 address BSC6900 ndatory) corresponding interface board. 118602
address that communicates with
the peer end. When it is set to 0, it
ADD is invalid. This IP address must be
Second local IP SCTPLNK(Op first configured on the GBFD-
LOCIP2 address BSC6900 tional) corresponding interface board. 118602
GBFD-
SET 111203
Set OPLOCK(Man Whether to lock all the non-default MRFD-
LOCKST Locked/Unlock BSC6900 datory) local accounts 210305
ADD
Local SCTP port SCTPLNK(Ma GBFD-
LOCPN No. BSC6900 ndatory) Local SCTP port number 118602
SET
Board Start Load LODCTRL(Ma MRFD-
LOD
LODCTRL Control. BSC6900 ndatory) board start load control. 210301
BTSSW(Optio
nal)
LOD
BTSPATCH(O GBFD-
LODMODE Loading Mode BSC6900 ptional) Mode of software loading 111202
CPU usage threshold for log flow
control. When the average CPU
SET usage of sliding windows reaches
Log control FCCPUTHD( or exceeds the threshold, log flow WRFD-
Packet queue usage threshold for
LOGCTHD threshold BSC6900 Optional) control is triggered. 040100
log flow control. When the average
packet queue usage of sliding
SET windows reaches or exceeds the
Log control FCMSGQTHD threshold, log flow control is WRFD-
LOGCTHD threshold BSC6900 (Optional) triggered. 040100
ADD Whether the SCTP is bound to a
LOGPORTFL SCTPLNK(Ma logical port. For details, see "ADD
AG Logic Port Flag BSC6900 ndatory) IPLOGICPORT". None
Logical port No. bound by the
ADD SCTP. For details, see the
SCTPLNK(Ma parameter "Logic port No." of the
LOGPORTNO Logic Port No. BSC6900 ndatory) "ADD IPLOGICPORT". None
Logical port slot No. bound by the
ADD SCTP. For details, see the
Logic Port Slot SCTPLNK(Ma parameter "Slot No." of the "ADD
CPU usage threshold for recovery
LOGPORTSN No. BSC6900 ndatory) IPLOGICPORT". None
from log flow control. When the
average CPU usage of sliding
SET windows is lower than the
Log restore FCCPUTHD( threshold, log flow control is WRFD-
Packet queue usage threshold for
LOGRTHD threshold BSC6900 Optional) triggered. 040100
recovery from log flow control.
When the average packet queue
SET usage of smooth windows is lower
Log restore FCMSGQTHD than the threshold, log flow control WRFD-
LOGRTHD threshold BSC6900 (Optional) is triggered. 040100
SET
Log control FCSW(Option WRFD-
LOGSW switch BSC6900 al) Whether to control the log flow 040100
COL
LOG(Mandato GBFD-
STR
LOGTYPE Log File Type BSC6900 ry) The log type to be collected. 111203
BTSLOG(Man
datory) Type of the log. "COMLOG"
ULD indicates a common log.
BTSLOG(Man "CMPLOG" indicates a GBFD-
LOGTYPE Log Type BSC6900 datory) compressed log. 111202
SET
E1T1LOP(Ma
LOPT Loop type BSC6900 ndatory) Loopback type None
Number of suspension periods
SET after the bandwidth adjustment is
OPTLOP(Man performed based on the packet
LOPT Loop type. BSC6900 datory) drop ratio. type
Loopback This parameter None
specifies the delay statistics
periods in which the bandwidth is
STR
not adjusted when the bandwidth
CALLRESLO GBFD-
adjustment function of the logical
LOPTIME Loop Time BSC6900 P(Optional) Whether
Time of an to external
permit the preemption
voice loop 111203
port is triggered due to the change
of lower-level sublink resources. If
of the packet drop ratio. This
the value of this parameter is YES,
Suspend times ADD parameter can be used to control
a CS domain service can preempt
after bandwidth IPLOGICPOR the rate of the bandwidth GBFD-
the sublink resources of the PS
LOSTSUSTM adjusted BSC6900 T(Optional) adjustment at the logical port. 118605
domain services on the lower-level
BTS of the cascaded BTSs when
LOWLEVSUB Low-level Sublink SET the CS domain service fails to
RESPREEMP Resource GCELLSOFT( preempt the sublink of the GBFD-
The CS services are preferred.
TFLG Preempt Switch BSC6900 Optional) corresponding level. 117301
This parameter indicates that the
SET CS services are permitted to
LOWLEVSUB Low Lev Sub BTSFLEXABI preempt the dynamic Abis
RESPREEMP Res Preempt SPARA(Optio resources on the sublink of the GBFD-
TFLG Flag BSC6900 nal) current level site. 117301
SET
Diversity LNA GCELLOTHB Whether to power off the TRX in
LOWNOISES Bypass ASIC(Optionalthe case to
Whether of permit
overlowthe
temperature
low noise of GBFD-
WH Permitted BSC6900 ) the BTS cabinet.
amplifier (LNA) bypass 111202
If this parameter is set to "Yes", the
BTS powers off the TRX and
LOWRXLEVO Allocate OL SET Whether to assign overlay
reports a "Load Power Off Alarm"
LFORBIDSWI Channel Based GCELLCHMG channels in an IUO cell based on GBFD-
to protect the TRX in the case of
TCH on RX Level BSC6900 AD(Optional) the receive level conditions 113201
overlow temperature of the BTS
cabinet. When the cabinet
Whether to power off the TRX of a
Low Temperature SET temperature returns to 0 celsius
BTS when the temperature of the
LOWTEMPLO StartLoadPower- BTSAPMUBP degree, the BTS powers on the GBFD-
BTS cabinet is too low.
ADPWROFF off Allowed State BSC6900 (Optional) TRX, and the alarm disappears. 111202
In multi-mode scenario, the value
of this parameter in one mode
Low Temperature SET must be the same as the value of
LOWTEMPLO StartLoadPower- BTSDPMUBP the corresponding parameter in GBFD-
ADPWROFF off Allowed State BSC6900 (Optional) another mode. 111202
STR
TRANSPERF
TST(Mandator GBFD-
LPBKMODE Loop Back Mode BSC6900 y) Loopback mode 111202
ADD
IPPATH(Mand Number of the IP logical port that GBFD-
LPN IP Logic Port No. BSC6900 atory) carries the IP path 118605
ADD
IPLOGICPOR
LPN Logic port No. BSC6900 T(Optional) Logical port number None
Packet EGPRS Downlink
Ack/Nack message sent by the
MS. The network side determines
the coding mode for data
transmission according to the radio
measurement report sent by the
MS. The cell with the good
transmission quality on the air
SET interface is set to the LA mode.
BTSIP(Manda Increment redundancy (IR) mode
LPN Logic port No. BSC6900 tory) Logical
requiresport
the number
network side None
retransmit the data block with
ADD different punching codes and the
IP Logic Port Slot IPPATH(Mand MS storeofthe
Number thehistorical
IP logicalerror
port that GBFD-
LPNSN No. BSC6900 atory) information.
carries the IPThepathdata block is 118605
retransmitted through cooperated
error correction function. With the
ADD
IR mode, the transmission quality
Type of the logic IPLOGICPOR
on the air interface of the cell can
LPNTYPE port BSC6900 T(Mandatory) Type of logical port None
be improved. However, the MS
SET must support this IR mode. The
Whether to enable power
GCELLEGPR cell with the dissatisfied
shutdown upon low voltage of the
Link Quality SPARA(Optio Load power-off
transmission voltage
quality on threshold.
the air GBFD-
battery.
LQCMODE Control Mode BSC6900 nal) If "Load Shutdown
interface is set to theFlag"
LR is set to
mode. 114201
In multi-mode scenario, the value
"Enable" and the load voltage is
of this parameter in one mode
lower than the value of this
SET must be the same as the value of
parameter, the load is
Load Shutdown BTSAPMUBP the corresponding parameter in GBFD-
automatically powered off.
LSDF Flag BSC6900 (Optional) another mode. 111202
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
Load Shutdown BTSAPMUBP the corresponding parameter in GBFD-
LSDV Voltage BSC6900 (Optional) another mode. 111202
SET GBFD-
LSRTRD LDR Third BSC6900 LDR(Optional) Third action taken for load control 118601
GBFD-
EXP 111203
Whether Include LOG(Optional Whether to include the list MRFD-
LSTCMD List Command BSC6900 ) command 210305
CMP
TBLDATA(Opt Query results can be displayed MRFD-
LstFormat Result list format BSC6900 ional) vertically or horizontally 210301
LOD
BRD(Optional
LT Load type BSC6900 ) Loading type None
GBFD-
SET 111203
LOGLIMIT(Ma MRFD-
LT Log Type BSC6900 ndatory) Type of the log 210305
GBFD-
EXP 111203
LOG(Mandato MRFD-
LT Log Type BSC6900 ry) Type of the log 210305
"Low Temperature Critical Point",
the temperature control system
needs to control the temperature
Lower temperature threshold for
difference between the air inlet and
the environment alarm box to
air outlet, and that between the air
report an alarm indicating that the
inlet and ambient temperature.
ambient temperature is too low. If
In multi-mode scenario, the value
the ambient temperature of the
of this parameter in one mode
BTS is lower than this threshold,
SET must be the same as the value of
the environment alarm box reports
Low Temperature BTSDHEUBP( the corresponding parameter in GBFD-
the alarm.
LTCP Critical Point BSC6900 Optional) another mode. 111202
In multi-mode scenario, the value
of this parameter in this mode
Lower SET must be the same as the value of
Lower voice quality threshold
Temperature BTSEXD(Opti the corresponding parameter in GBFD-
associated with the automatic
LTEMTHD Threshold BSC6900 onal) another mode. 111202
adjustment of the AMR handover
uplink thresholdThe value of this
Uplink Long-term SET parameter must be smaller than or
LTFERLOWT FER Lower GCELLCCAM equal to the value of Uplink Long- GBFD-
H Threshold BSC6900 R(Optional) term FER Target. 115506
Target voice quality value
SET associated with the automatic
Uplink Long-term GCELLCCAM adjustment of the uplink threshold GBFD-
LTFERTGT FER Target BSC6900 R(Optional) of AMR handover 115506
Upper voice quality threshold
Uplink Long-term SET associated with the automatic
FER Upper GCELLCCAM adjustment of the AMR handover GBFD-
LTFERUPTH Threshold BSC6900 R(Optional) uplink threshold 115506
Factor of uplink threshold
adjustment. It indicates the linear
SET relation between the threshold
The level 1 Voltage Standing Wave
Uplink Threshold GCELLCCAM adjustment value and the GBFD-
Ratio (VSWR) threshold. When the
LTTHADJFA Adjust Factor BSC6900 R(Optional) logarithmic FER. 115506
VSWR is higher than this
parameter, the TRX will report a
The level 2 Voltage Standing Wave
SET level-1 VSWR alarm. At this time,
Ratio (VSWR) threshold. When the
BTSRXUBP( the BTS can provide services but GBFD-
VSWR is higher than this
Lvl1Vswr Lvl1 Vswr BSC6900 Optional) its coverage rate decreases. 111202
parameter, the TRX will report a
level-2 VSWR alarm. At this time,
SET the BTS disables power
Whether "Shutdown Voltage" is
BTSRXUBP( amplification and fails to provide GBFD-
valid.
Lvl2Vswr Lvl2 Vswr BSC6900 Optional) services. 111202
In multi-mode base station
scenario, the value of this
SET parameter in different modes must
Low Voltage BTSAPMUBP be the same for the same multi- GBFD-
LVSDF Shutdown Flag BSC6900 (Optional) mode base station. 111202
SET
M3UA service SCTPSRVPO Number of the M3UA service GBFD-
M3UASRVPN listening port No. BSC6900 RT(Optional) listening port 118602
ADD
XPUVLAN(Ma MRFD-
MAC MAC Address BSC6900 ndatory) MAC address of the VLAN 210301
When the number of error frames
MAC Frame SET on the MAC layer reaches the
Error Alarm BTSETHPOR value of this parameter, the frame GBFD-
MACEAAT Threshold BSC6900 T(Optional) error alarm is generated. 118630
in an assignment or handover
command. If the parameter is set
to Frequency_List, an ARFCN is
indicated through the Frequency
List information contained in an
assignment or handover
command. If this parameter is set
MAC Frame Identifies
When theanumber
maintenance
of errorgroup.
frames
to OPTIMIZED_CA_MA, the
Error Alarm ADD
SET Maintenance
on the MAC layergroup: maintenance
decreases to the
assignment command carries only
Clearance ETHMA(Mand
BTSETHPOR alliance
value of (MA), which is athe frame
this parameter, GBFD-
the MA but not the CA when a cell
MACEADT Threshold BSC6900 atory)
T(Optional) component
error alarm isof cleared.
the maintenance 118630
works on only one frequency band,
ADD domain (MD). Maintenance
and the assignment command
ETHMEP(Man domain is an Ethernet or a
SET carries both the MA and CA if the
datory) component of an Ethernet in which
MACODINGM ARFCN Coding GCELLSOFT( cell works on more than one GBFD-
PING the connectivity failure
OD Scheme BSC6900 Optional) frequency band. 113701
MAC(Mandato management is performed. The
This parameter specifies whether
ry) maintenance domain is uniformly
to reduce the transmit power of the
TRC managed by one ISP. One MD can
channels with the power derating
MAC(Mandato be divided into one or more GBFD-
function enabled of the non-BCCH
MAIDX MA Index BSC6900 ry) This parameter
maintenance specifies whether
group. 118630
timeslots on the BCCH TRX. When
to enable the Enhanced BCCH
this parameter is set to YES, the
Power Consumption Optimization
MAINBCCHP Power Derating SET BSC6900 is allowed to reduce the
feature. Generally, the BCCH TRX
WDTACTCHE Active Channel GCELLOTHE transmit power of the non-BCCH GBFD-
transmits signals at the maximum
N Enabled BSC6900 XT(Optional) timeslots on the BCCH TRX. 111609
transmit power. When this
parameter is set to YES, the
SET BSC6900 is allowed to reduce the
MAINBCCHP Power Derating GCELLOTHE transmit power of the non-BCCH GBFD-
WRDTEN Enabled BSC6900 XT(Optional) idle timeslots on the BCCH TRX. 111609
This parameter specifies the end
SET time of the period during which the
MAINBCCHP Power Derating GCELLOTHE power of the non-BCCH timeslots GBFD-
WRDTETIME End Time BSC6900 XT(Optional) on the BCCH TRX is derated. 111609
This parameter specifies the range
MAINBCCHP SET of power derating over the non-
WRDTRANG Power Derating GCELLOTHE BCCH timeslots on the BCCH GBFD-
E Range BSC6900 XT(Optional) TRX. 111609
This parameter specifies the start
SET time of the period during which the
Bar code 1 of the interface board
MAINBCCHP Power Derating GCELLOTHE power of the non-BCCH timeslots GBFD-
of the BTS. This parameter is the
WRDTSTIME Start Time BSC6900 XT(Optional)
on the BCCH TRX is derated. 111609
electronic serial number of the
active PTU board. An electronic
BTS Interface ADD serial number uniquely identifies
MAINDEVTA Board Bar Code BTSESN(Man an PTU board. This parameter is GBFD-
B 1 BSC6900 datory) set before delivery. 111202
ADD
BTSAUTOPL
MAINDEVTA PTU Main Dev. AN(Mandatory Bar code 1 of the BTS interface GBFD-
B Tab BSC6900 ) board 118601
ADD
BTSBINDLOC Number of main location group.
MAINLOCGR Main Location GRP(Mandato Each cell contains only one main GBFD-
PNO Group No. BSC6900 ry) location group. 510104
ADD
GCBSADDR( GBFD-
MASK Mask BSC6900 Mandatory) Subnet mask of the CBC 113601
SET
BTSETHPOR GBFD-
MASK IP Mask BSC6900 T(Optional) IP subnet mask of a BTS port 118601
ADD
BTSPPPLNK( GBFD-
MASK Subnet Mask BSC6900 Mandatory) Subnet mask of BTS PPP link. 118611
ADD
BTSMPGRP( Subnet mask of BTS MLPPP GBFD-
MASK Subnet Mask BSC6900 Mandatory) Group. 118611
ADD IP address of the main clock
Master Clock BTSAUTOPL server. It must be a legal A/B/C
MASTERIPA Server IP AN(Mandatory type address but not a broadcast GBFD-
DDR Address BSC6900 ) address or network address. 118606
SET It must be the valid address of the
BTSIPCLKPA A, B, or C type and cannot be the
MASTERIPA Clock Server IP RA(Mandatory broadcast address or network GBFD-
DDR Address 1 BSC6900 ) address. 118606
ADD
PPP mux max MPGRP(Optio Maximum length of the PPP
MAXMFLEN mux-frame length BSC6900 nal) multiplexing frame None
SET
MaxMissTime Maximum Retry PWDPOLICY( Maximum number of retries when MRFD-
s Times BSC6900 Optional) the user logs in 210305
SET
Max Alarm Log ALMCAPACIT Maximum capacity for storing the MRFD-
MAXNUM Number BSC6900 Y(Optional) alarm log 210304
SET
MAXOUTPUT Diesel Max BTSDPMUBP Maximum output power of the GBFD-
POWER Output Power BSC6900 (Optional) diesel 111202
If the number of the path
Retransmission times of Pb link
retransmissions
Maximum times for exceeds this
amessages.
Physical
check (LapdCheck)
value, the parameter
Information message is
to deleted
be
When a BSC sends a Pb link
ADD automatically.
transmitted. WhenThe value must be
theexternal
check message to an
MAXPATHRE SCTPLNK(Op smaller than
retransmission Association max this GBFD-
PCU and fails totimes exceeds
receive a
TR Path max retrans BSC6900 tional) retrans. and the BTS still cannot
parameter 118602
response from the external PCU, it
receive
retransmits any thecorrect SAMBThis
message. frame
Pb Link Check SET from the MS, the BTS
parameter indicates the maximum sends a
MaxPbLinkCh Max TimeOut OTHSOFTPA connection failure
times for the PB link check message GBFD-
kNum Number BSC6900 RA(Optional) (including
message to thebehandover
transmitted. failure 114101
information) to the BSC, which
releases the assigned channel and
SET stops timervalue
T3105
Maximum of after receiving
the PDCH ratio
MAXPDCHN Maximum GTRXBASE( Maximum
this number of PDCHs that GBFD-
in a message.
cell. The number of available
UM Number of PDCH BSC6900 Optional) can
In a be assigned in the TRX
non-synchronized 113101
TCHs and PDCHs in a handover, cell is set to
an
a MS
fixed keeps
value. sending
The PDCH Handover
ratiowhen
is:
Maximum current coefficient
Maximum Rate SET Access
Maximum
available Burst messages
current
PDCH/(TCH/F (usually,
coefficient
+ when
static
the battery is charged. When the
MAXPDCHRA Threshold of GCELLPSCH the
PDCH).value
batteryofistimer T3124
charged. isisused
When 320theto
battery isThis parameter
charged, the maximum GBFD-
TE PDCHs in a Cell BSC6900 M(Optional) ms)
batteryto the
restrict the network.
is charged,
PDCH When
the
ratio. maximum 113101
current can be 0.05 to 0.25 times
detecting
current can these messages,
be 0.01 to 0.99 thetimes
SET of the capacity of the battery
BTS
of thereturns
capacity a Physical Information
of the battery
Retry Times of BSCPSSOFT cabinet. That is, the charge
message
cabinet. That to the is, MS
the through
charge the
MaxPollingRe Downlink TBF PARA(Option coefficient
Maximum is 0.05-0.25.
number For to
of attempts GBFD-
main DCCH
coefficient is (FACCH)
0.01-0.99.channel,
For
tryTimes Polling BSC6900 al) example,
resend theif polling
the capacity
messages of the 114101
starts
example, timer T3105,
if the and sends
capacity of the a
battery cabinet is 200 A and the
MSG_ABIS_HO_DETECT
battery cabinet is 200 A and the
charge coefficient is 0.15, the
SET message to the BSC.
charge coefficient is 0.15, the
maximum charge current for the
MAXRECHAR Charge BTSPMUBP( The BTS includes
maximum charge current the information
for the GBFD-
battery cabinet is 30 A.
GECURRENT Coefficient BSC6900 Optional) of different
battery cabinetphysical
is 30layers
A. in the 111202
In multi-mode scenario, the value
Physical Information message,
of this parameter in one mode
thus ensuring correct traffic
SET must be the same as the value of
transmission for the MS. If the
MAXRECHAR Charge BTSDPMUBP the corresponding parameter in GBFD-
timer timeouts before a SAMB
GECURRENT Coefficient BSC6900 (Optional) another mode. 111202
frame is received from the MS, the
BTS retransmits the Physical GBFD-
Max Resend SET Information message to the MS. 110601
Maximum retransmission for radio
Times of GCELLHOAD For details, see protocols 08.58 GBFD-
priority 1. The 2bit Radio Priority
MAXRESEND Phy.Info. BSC6900 (Optional) and 04.08. 510501
message carried by the MS in the
Max Packet Channel Request message
Retransmissions SET has four levels of priorities. Level 1
Maximum retransmission for radio
MAXRETRAN for Radio Priority GCELLPRAC is the highest priority, and level 4 is GBFD-
priority 2. The 2bit Radio Priority
S1 1 BSC6900 H(Optional) the lowest priority. 119110
message carried by the MS in the
Max Packet Channel Request message
Retransmissions SET has four levels of priorities. Level 1
Maximum retransmission for radio
MAXRETRAN for Radio Priority GCELLPRAC is the highest priority, and level 4 is GBFD-
priority 3. The 2bit Radio Priority
S2 2 BSC6900 H(Optional) the lowest priority. 119110
message carried by the MS in the
Max Packet Channel Request message
Retransmissions SET has four levels of priorities. Level 1
Maximum retransmission for radio
MAXRETRAN for Radio Priority GCELLPRAC is the highest priority, and level 4 is GBFD-
priority 4. The 2bit Radio Priority
S3 3 BSC6900 H(Optional) the lowest priority. 119110
message carried by the MS in the
Max Packet Channel Request message
Retransmissions SET has four levels of priorities. Level 1
MAXRETRAN for Radio Priority GCELLPRAC is the highest priority, and level 4 is GBFD-
S4 4 BSC6900 H(Optional) the lowest priority. 119110
larger than this value, the
PPPMUX multiplexing is
performed. The value of this
parameter cannot be larger than
the maximum multiplexed frame
length wMuxMfl. To enable the
PPPMUX, the number of sub-
Huawei
frames mustpower becontrol algorithm
more than II
or equal GBFD-
ADD divides
to 2. The three qualitycondition
following zones must 118611
PPP mux max PPPLNK(Opti according to the quality<=of the
be met: wMuxMaxSfL GBFD-
MAXSFLEN sub-frame length BSC6900 onal) receive signals.
( wMuxMfl-8 )/2 When the power is 118622
downwardly adjusted according to
Huawei power control algorithm II
the level, the maximum downward
ADD divides three quality zones
adjustment step can vary
PPP mux max MPGRP(Optio according to the quality
Maximum length of the
of the PPP
according to the quality of the
MAXSFLEN sub-frame length BSC6900 nal) receive signals.
multiplexing frameWhen the power is None
received signals. This parameter
downwardly adjusted according to
Huawei
specifiespower control algorithm
the maximum step of II
the level, the maximum downward
MAX Down SET divides
downward three quality
power zones when
adjustment
adjustment step can vary
Adj.Value GCELLPWR2 according
the quality toof the
the quality
receivedof the
signals GBFD-
according to the quality of the
MAXSTEP0 Qual.Zone 0 BSC6900 (Optional) receive
falls intosignals. When0.the power is
quality zone 110703
received signals. This parameter
downwardly adjusted according to
specifies the maximum step of
the level, the maximum downward
MAX Down SET downward power adjustment when
adjustment step can vary
Adj.Value GCELLPWR2 the quality of the received signals GBFD-
according to the quality of the
MAXSTEP1 Qual.Zone 1 BSC6900 (Optional) falls into quality zone 1. 110703
received signals. This parameter
specifies the maximum step of
MAX Down SET downward power adjustment when
Adj.Value GCELLPWR2 the quality of the received signals GBFD-
MAXSTEP2 Qual.Zone 2 BSC6900 (Optional) falls into quality zone 2. 110703
Maximum time advance (TA). The
SET value of this parameter is
GCELLBASIC determined by that of "Cell
PARA(Option Extension Type" in the "ADD GBFD-
MAXTA Max TA BSC6900 al) GCELL" command. 110901
STR
Maximum time POSAVE(Opti
MAXTIME for posave BSC6900 onal) Maximum positioning time. None
Maximum
Number of SET Maximum number of (16 kbit/s)
Occupied Abis GTRXBASE( Abis timeslots that the PDCHs can GBFD-
MAXTSOCP Timeslots BSC6900 Optional) use in the TRX 117301
TRC
IPADDR(Optio Maximum TTL value of the sent
MAXTTL MAX TTL BSC6900 nal) TRACERT packet None
MAX Up Adj. PC SET Step of upward power adjustment
MAXVALADJ Value by GCELLPWR2 according to the quality of the GBFD-
RX RX_LEV BSC6900 (Optional) received signals 110703
STR
MBFDLOCALI Multi hop BFD IPCHK(Manda GBFD-
ADD Used for requesting the MS to
P detect local ip BSC6900 tory) For
LocaltheIPpurpose
addressofforaccurately
multi-hop BFD 118609
GCNOPERAT report the measurement
reflecting the radio environment of
OR(Mandator information of neighboring cells in
a network, filtering is performed on
SET
y) multiple frequency bands. This
the measured values in several
GCELLCCBA
ADD parameter is carried in the system GBFD-
consecutive measurement reports.
MBR Multi-band report BSC6900 SIC(Optional)
GCELL(Mand For the purpose
information of accurately
2ter and 5ter. 114401
This parameter indicates the
atory) reflecting the radio environment of
number of enhanced measurement
ADD a network, filtering is performed on
Filter Length for SET reports received on a signaling
GEXT2GCEL the measured values in several
SDCCH GCELLHOFIT channel used to measure the GBFD-
L(Mandatory) consecutive measurement reports.
MBSIGNLEN MEAN_BEP BSC6900 PEN(Optional) MEAN_BEP value. 117501
ADD This parameter indicates the
GEXT3GCEL number of enhanced measurement
SET
L(Mandatory) reports received on a voice
MBTRAFFLE Filter Length for GCELLHOFIT
SET channel used to measure the GBFD-
N TCH MEAN_BEP BSC6900 PEN(Optional)
FHO(Mandato MEAN_BEP value. 117501
ry)
ADD
COL
Second BTS BTSAUTOPL
SYNCINFO(M Number of the BTS. The BTS is GBFD-
MBTSID Index BSC6900 AN(Mandatory
andatory) numbered uniquely in a BSC. 118201
)
SET
COL
BTSAUTOPL
Second BTS SYNCINFO(M Name of the BTS. The BTS is GBFD-
ANCFG(Optio
MBTSNAME Name BSC6900 andatory) named uniquely in a BSC. 118201
nal) Mobile country code. This
ADD parameter identifies the country
GCELLQUICK where a mobile subscriber is
SETUP(Mand located, for example, the Chinese MRFD-
MCC MCC BSC6900 atory) MCC is 460. 210301
Local mobile country code (MCC).
SET It is used to identify the country
BTSAUTOPL that the mobile subscriber belongs
ANCFG(Optio to. For example, the MCC of China GBFD-
MCC1 Cell MCC BSC6900 nal) is 460. 510702
GBFD-
ADD Number of MC priorities. This 118611
MPGRP(Optio parameter is valid when the MP GBFD-
MCCLASS MC PRI number BSC6900 nal) group type is MC. 118622
ADD
BTSMPGRP( GBFD-
MCCLASS MC PRI Number BSC6900 Optional) Number of MC prioritie levels. 118611
SET
ADD
BTSFMUABP(
NCELL(Mand
Optional)
atory)
SET
COL
Second Cell BTSAPMUBP
SYNCINFO(M Number of the cell. The cell is MRFD-
ADD
MCELLID Index BSC6900 (Optional)
andatory) numbered uniquely in a BSC. 210301
NCELL(Mand
SET Cabinet No. of the management
atory)
BTSDATUBP( board. The management board
COL
Optional) refers to the TMU or RXU that
Second Cell SYNCINFO(M GBFD-
SET directly communicates with the
MCELLNAME Name BSC6900 andatory) Name of cell 2. 111202
BTSDEMUBP board. The configuration of this
(Optional) parameter must be consistent with
Cabinet No. of SET the actual physical connection.
Management BTSDHEUBP( Otherwise, the board may not work GBFD-
MCN Board BSC6900 Optional) properly. 111202
ADD
MEASPERIO Measurement GNRNC(Man MRFD-
D Period BSC6900 datory) Common measurement period 211402
SET
GCELLCCUT
MEASURETY Measurement RANSYS(Opti Type of the measurement report GBFD-
PE Report Type BSC6900 onal) (MR) reported by the MS 117501
Identifies a maintenance point in
ADD
ADD the maintenance alliance
BTSETHLCM
ETHMEP(Man A maintenance point is an edge GBFD-
EP(Mandatory
MEPID MEP ID BSC6900 datory) node of the MA. 118630
)
ADD GBFD-
BTSETHRMM Identifies a maintenance end point 118630
EP(Mandatory
(MEP) of a maintenance MRFD-
The type of the maintenance point
MEPID MEP ID BSC6900 ) association. 210301
added to the maintenance group.
LocalMep indicates a local
ADD maintenance point and
ETHMEP(Man RemoteMep indicates a remote GBFD-
MEPTYPE MEP Type BSC6900 datory) maintenance point. 118630
GBFD-
ADD Minimum receive level for a 118611
MP/MC list head MPGRP(Optio neighbor cell to become a GBFD-
MHF option BSC6900 nal) candidate cell during
MP/MC sequence cell option
header 118622
reselection. When the receive level
of the serving cell is lower than the
ADD
value of this parameter, it indicates
MP/MC List BTSMPGRP( Frame encapsulation format GBFD-
that the normal cell reselection
MHF Head Option BSC6900 Optional) supported by MP/MC. 118611
level is bad. In this case, the
parameter value is used for the
SET calculation of the times of the
MINACCRXL Cell Reselection GCELLNC2P occurrence of bad normal cell GBFD-
EV Level Threshold BSC6900 ARA(Optional) reselection level. 116201
ADD
Min bandwidth IPLOGICPOR Minimum bandwidth for dynamic GBFD-
Selects 3G candidate cells. If the
MINBW [64kbps] BSC6900 T(Optional) adjustment at the logical port 118605
measured value of a 3G
neighboring cell is lower than this
ADD threshold, the 3G neighboring cell
Minimum receive level offset.
MINECNOTH Min Ec/No GEXT3GCEL will be removed from among the GBFD-
An MS can be handed over to a
RES threshold BSC6900 L(Optional) 3G candidate cells. 114301
neighboring cell only when the
downlink level of the neighboring GBFD-
ADD cell is greater than the sum of "Min 110601
Threshold for triggering prompt
Min Access Level G2GNCELL(O DL level on candidate Cell" and the GBFD-
alarm clearance when the ANT_A
MINOFFSET Offset BSC6900 ptional) value of this parameter. 510501
tributary antenna current is too
ANT_A ALD heavy. When the actual current is
Current Minor SET higher than the configured value,
Threshold for triggering prompt
MinorAlmThd Alarm Occur BTSRXUBP( the ALD Current Prompt Alarm MRFD-
alarm clearance when the ANT_B
A Threshold BSC6900 Optional) clearance is triggered. 210304
tributary antenna current is too
ANT_B ALD heavy. When the actual current is
Current Minor SET higher than the configured value,
Warning alarm threshold against
MinorAlmThd Alarm Occur BTSRXUBP( the ALD Current Prompt Alarm MRFD-
excessive TMA feed current of
B Threshold BSC6900 Optional) clearance is triggered. 210304
feed tributary 0. When the actual
current is greater than the
Feed Tri. 0 TMA SET specified value, a TMA feed
MINORALMU Over Warning BTSDATUBP( current warning alarm is MRFD-
P0 Alarm Threshold BSC6900 Optional) generated. 210304
Warning alarm threshold against
excessive TMA feed current of
feed tributary 1. When the actual
current is greater than the
Feed Tri. 1 TMA SET specified value, the TMA feed
Warning alarm threshold against
MINORALMU Over Warning BTSDATUBP( current warning alarm is MRFD-
excessive TMA feed current of
P1 Alarm Threshold BSC6900 Optional) generated. 210304
feed tributary 2. When the actual
current is greater than the
Feed Tri. 2 TMA SET specified value, the TMA feed
Warning alarm threshold against
MINORALMU Over Warning BTSDATUBP( current warning alarm is MRFD-
excessive TMA feed current of
P2 Alarm Threshold BSC6900 Optional) generated. 210304
feed tributary 3. When the actual
current is greater than the
Feed Tri. 3 TMA SET specified value, the TMA feed
Warning alarm threshold against
MINORALMU Over Warning BTSDATUBP( current warning alarm is MRFD-
excessive TMA feed current of
P3 Alarm Threshold BSC6900 Optional) generated. 210304
feed tributary 4. When the actual
current is greater than the
Feed Tri. 4 TMA SET specified value, the TMA feed
Warning alarm threshold against
MINORALMU Over Warning BTSDATUBP( current warning alarm is MRFD-
excessive TMA feed current of
P4 Alarm Threshold BSC6900 Optional) generated. 210304
feed tributary 5. When the actual
current is greater than the
Feed Tri. 5 TMA SET specified value, the TMA feed
Threshold for triggering prompt
MINORALMU Over Warning BTSDATUBP( current warning alarm is MRFD-
alarm clearance when the ANT_A
P5 Alarm Threshold BSC6900 Optional) generated. 210304
tributary antenna current is too
ANT_A ALD heavy. When the actual current is
Current Minor SET lower than the configured value,
Threshold for triggering prompt
Alarm Clear BTSRXUBP( the ALD Current Prompt Alarm MRFD-
alarm clearance when the ANT_B
MinorClrThdA Threshold BSC6900 Optional) clearance is triggered. 210304
tributary antenna current is too
ANT_B ALD heavy. When the actual current is
Current Minor SET lower than the configured value,
Alarm Clear BTSRXUBP( the ALD Current Prompt Alarm MRFD-
MinorClrThdB Threshold BSC6900 Optional) clearance is triggered. 210304
In a direct retry, when the receive
level of a neighboring cell is no
Min Power Level SET smaller than this parameter, the
MINPWRLEV For Directed GCELLHOCT neighboring cell can be a GBFD-
DIRTRY Retry BSC6900 RL(Optional) candidate cell for the direct retry. 110607
SET
GCELLCHMG Minimum time required for a TCH
MINRESTIME TCH Minimum BASIC(Optionto transform to a SDCCH and then GBFD-
Selects 3G candidate cells. If the
TCH Recovery Time BSC6900 al) transform back to a TCH 113001
measured value of a 3G
neighboring cell is lower than this GBFD-
ADD threshold, the 3G neighboring cell 114301
MINRSCPTH Min RSCP GEXT3GCEL will be removed from among the GBFD-
RES threshold BSC6900 L(Optional) 3G candidate cells. 114302
ADD
MINRXINTER Minimum RX BTSBFD(Opti Minimum interval at which the BTS GBFD-
VAL Interval BSC6900 onal) receives BFD packets 118609
ADD
GCNOPERAT
OR(Mandator
Min interval of STR
y)
BFD packet send IPCHK(Option
ADD Minimum interval between sent GBFD-
MINTXINT [ms] BSC6900 al)
GCELL(Mand BFD packets 118609
atory)
ADD
ADD
MINTXINTER Minimum TX GEXT2GCEL
BTSBFD(Opti Minimum interval at which the BTS GBFD-
VAL Interval BSC6900 L(Mandatory)
onal) sends BFD packets 118609
ADD
STR
GEXT3GCEL
ETHMIRROR
L(Mandatory)
Mirror Dest Port PORT(Mandat
SET Mirror destination Ethernet port
MIRRORDPN No. BSC6900 ory)
FHO(Mandato number None
ry)
STR
ADD
ETHMIRROR
Mirror Source BTSAUTOPL
PORT(Mandat
MIRRORSPN Port No. BSC6900 AN(Mandatory
ory) Mirror Ethernet port number None
)
STR
SET
ETHMIRROR
BTSAUTOPL
MIRRORTYP PORT(Mandat
ANCFG(Optio
E Mirror Type BSC6900 ory) Mirror type None
nal)
ADD Mobile network code. This
GCELLQUICK parameter identifies the public land
SETUP(Mand mobile network (PLMN) where a MRFD-
MNC MNC BSC6900 atory) mobile
Workingsubscriber
mode of theis homed.
system clock. 210301
SET Working modes of the system
BTSAUTOPL clock
Mobileare as follows:
network code (MNC). It is
ANCFG(Optio(1)
usedMANUAL: Inthe
to identify thisPLMN
mode,that
youthe GBFD-
Usage threshold of the CPU for
MNC1 Cell MNC BSC6900 nal) must
mobilespecify a clock
subscriber sourceto.
belongs and 510702
calling access. If the usage of the
prevent the switching of the clock
CPU exceeds the threshold, the
source.
SET calling access request is
(2) AUTO: In this mode, you do not
MOCACCES MOC Access BSCFCPARA( transferred to other CPU for GBFD-
need to specify a clock source and
SCPURATE CPU Rate BSC6900 Optional) processing. 111705
the system automatically selects
the clock source with the highest
SET priority.
System clock CLKMODE(M (3) FREE: In this mode, the crystal MRFD-
SCTP link work mode. Server
MODE working mode BSC6900 andatory) oscillator of GCU board is used. 210502
mode: BSC6900 starts the
listening and waits for the peer to
ADD send the SCTP-INIT message.
Signalling link SCTPLNK(Ma Client mode: BSC6900 actively GBFD-
MODE mode BSC6900 ndatory) sends the SCTP-INIT message. 118602
SET
QUICKCFG(M MRFD-
SWP
MODE Configure Mode BSC6900 andatory) configuration mode 210301
MBSCMODE(
Mandatory)
CHK
Mode after MODEDATA( MRFD-
MODE Switchover BSC6900 Mandatory) Working mode after switchover 210301
Working mode of a port. When this
parameter is set to
Alarm mode of feed tributary 0.
CHECK_ON_STANDBY_PORT,
There are three alarm modes.
the connectivity check is
Alarm mode 1 has only one type of
performed on the standby port.
alarms. The alarm current is fixed
When this parameter is set to
SET and greater than the normal
Alarm mode of feed tributary 1.
CHECK_ON_INDEPENDENT_PO
MSP(Optional working
Backup current.
mode
There
RT, theare threeofalarm
connectivity
the switch
modes.
check is
GBFD-
MODE Backup mode BSC6900 ) Alarm mode
protection 2 has two types of
group 111701
Alarm mode
performed on1the
hasindependent
only one type of
alarms: warning alarms and critical
alarms.
port. WhenThethis
alarm current is
parameter is fixed
set to
alarms. The alarm current is fixed
STR and greater than the normal
CHECK_ON_PRIMARY_PORT,
Alarm modethan
and greater of feed
thetributary
normal 2.
IPCHK(Option working
the current. check is
connectivity GBFD-
There
working are three alarm modes.
current.
MODE Check mode BSC6900 al) Alarm mode
performed on2 hasactive
the two types of
port.type 118609
Alarm mode 1
3 has only one
two types of of
alarms: warning alarms and critical
alarms. The alarm current is
alarms: warning alarms and critical fixed
alarms. The alarm current is fixed
SET and greater
alarms. The than the normal
warning alarm current
Alarm mode
and greater of feed
than thetributary
normal 3.
Feed Tri. 0 Alarm BTSDATUBP( working
is current.
periodical pulse current, while MRFD-
There
working are three alarm modes.
current.
MODE0 Mode BSC6900 Optional) Alarm
the mode
critical 2 has
alarm two types
current of
Alarm mode 1 3 has only onefixed.
is
two types type
of of
210304
alarms: warning alarms and critical
alarms.
alarms: The alarm
warning current
alarms and is critical
fixed
alarms. The alarm current is fixed
SET and greater
alarms. The than the normal
warning alarm current
Alarm
and mode
greater of feed
than thetributary
normal 4.
Feed Tri. 1 Alarm BTSDATUBP( working
is current.
periodical pulse current, while MRFD-
There are
working three alarm modes.
current.
MODE1 Mode BSC6900 Optional) Alarm
the mode
critical 2 has
alarm two types
current of
is fixed. 210304
Alarm mode 1
3 has only
two typestype
one of of
alarms: warning alarms and critical
alarms.
alarms: The alarm
warning current
alarms and is critical
fixed
alarms. The alarm current is fixed
SET and greater
alarms. The than the normal
warning alarm current
Alarm mode
and greater of feed
than thetributary
normal 5.
Feed Tri. 2 Alarm BTSDATUBP( working
is current.
periodical pulse current, while MRFD-
There
working are three alarm modes.
current.
MODE2 Mode BSC6900 Optional) Alarm
the mode
critical 2 has
alarm two types
current of
Alarm mode 1 3 has only onefixed.
is
two types type
of of
210304
alarms: warning alarms and critical
alarms.
alarms: The alarm
warning current
alarms and is critical
fixed
alarms. The alarm current is fixed
SET and greater
alarms. The than the normal
warning alarm current
and greater than the normal
Feed Tri. 3 Alarm BTSDATUBP( working current.
is periodical pulse current, while MRFD-
working current.
MODE3 Mode BSC6900 Optional) Alarm mode
the critical 2 has
alarm two types
current of
is fixed. 210304
Alarm mode 3 has two types of
alarms: warning alarms and critical
alarms: warning alarms and critical
alarms. The alarm current is fixed
SET alarms. The warning alarm current
and greater than the normal
Feed Tri. 4 Alarm BTSDATUBP( is periodical pulse current, while MRFD-
working current.
MODE4 Mode BSC6900 Optional) the critical alarm current is fixed. 210304
Alarm mode 3 has two types of
alarms: warning alarms and critical
SET alarms. The warning alarm current
Feed Tri. 5 Alarm BTSDATUBP( is periodical pulse current, while MRFD-
MODE5 Mode BSC6900 Optional) the critical alarm current is fixed. 210304
STR
BTSRACKTE
MONITORPE MPMON(Man GBFD-
RIOD Monitor Period BSC6900 datory) Monitoring period 111202
STR
BTSRACKTE
MONITORTIM MPMON(Man GBFD-
E Monitor Time BSC6900 datory) Monitoring duration 111202
SET
BTSAUTODL
DACTINFO(M Month when the TMU board GBFD-
Month Month BSC6900 andatory) software is released 111202
A quick handover can be initiated
SET only if the rate of an MS is higher
MOVESPEED Quick Move GCELLHOFA than this parameter during a GBFD-
THRES Speed Threshold BSC6900 ST(Optional) certain period of time. 510102
idle timeslot works at 16 kbit/s. In
the case of statistical multiplexing
on a 64 kibt/s timeslot, the idle
timeslots can be multiplexed only
with the TCHs in the same cabinet
group onto one 64 kbit/s timeslot.
Semi: monitoring timeslots of the
WhenThe
BTS. the monitoring
number of error frames
timeslots
MP Group Frame ADD on
work theatMP group16
8 kbit/s, reaches
kbit/s, the value
32 kbit/s,
Error Alarm BTSMPGRP( of this parameter, the
and 64 kbit/s. The monitoring frame error GBFD-
MPGRPEAAT Threshold BSC6900 Optional) alarm
timeslotsis generated.
can be multiplexed only 118611
MP Group Frame with
When semi-permanent
the number of errorlinks.frames
Error Alarm ADD A 2048
on the MP Mbit/s
groupE1decreases
contains thirty-
to the
Clearance BTSMPGRP( two
value 64ofkbit/s timeslots. Timeslot
this parameter, the frame 0 GBFD-
ADD is reserved forcleared.
synchronization and
MPGRPEADT Threshold BSC6900 Optional) error alarm is 118611
MPGRP(Man cannot be assigned.
datory) Statistical multiplexing means that GBFD-
ADD signaling timeslots are time- 118611
MPLNK(Mand division multiplexed in an E1 GBFD-
MPGRPN MP Group No. BSC6900 atory) MP groupsuch
timeslot, numberas the OML and 118622
RSL timeslots or the RSL
ADD timeslots. For example, in the case
IPLOGICPOR of 4:1 multiplexing, one 64 kbit/s
SET
ADD
MPGRPN MP Group No. BSC6900 T(Optional) timeslot
MP group multiplexes
number one OML and None
BTSFMUABP(
BTSMPGRP(
three RSL links or four RSL links of
Optional)
Mandatory)
the BTS. The 64 kbit/s timeslot that
SET
ADD
multiplexes the OML has a
MLPPP Group BTSAPMUBP
BTSMPLNK( Number of an MLPPP group on a GBFD-
multiplexing ratio of up to 4:1 even
MPGRPN No. BSC6900 (Optional)
Mandatory) BTS. It is unique in a BTS. 118611
if the multiplexing ratio exceeds
SET Number of the serial port where
4:1.
BTSDATUBP( the board is located. The
Optional) management board refers to the
Multiplexing ADD HDLC and IP BTS is not support GBFD-
SET TMU or RXU that directly
MPMODE Mode BSC6900 BTS(Optional) this parameter. 111301
BTSDEMUBP communicates with the board. The
(Optional) configuration of this parameter
SET must be consistent with the actual
BTSDHEUBP( physical connection. Otherwise, GBFD-
MPN Connect Port No. BSC6900 Optional) the board may not work properly. 111202
Whether power control algorithm II
ADD allows measurement report
BTSMPGRP( compensation. GBFD-
MPSWITCH MCPPP Switch BSC6900 Optional) When
Is Supportmaking a power control
MCPPP. 118611
decision, the BSC retrieves a
certain number of history GBFD-
ADD measurement reports and 118611
MPGRP(Optio performs weighted filtering on the GBFD-
SET
MPTYPE MP type BSC6900 nal) MP typelevel values and receive
receive 118622
MPUBIND(Ma
ndatory) quality values in these reports,
ADD which may be obtained when
BRD(Mandato different
Number of transmit
the slotpowers
where were
the MPU MRFD-
SET
MPUSLOT MPU Slot No. BSC6900 ry) used by BTSs
subsystem or MSs. To ensure
is located 210301
MPUBIND(Ma
that correct receive level values
ndatory)
and receive quality values are
ADD
used in filtering, you must
MPUSUBRAC MPU Subrack BRD(Mandato Number of the subrack where the MRFD-
compensate the receive level
K No. BSC6900 ry) MPU subsystem is located 210301
values and receive quality values
in history measurement reports
MR. SET obtained when transmit powers
MRCOMPRE Compensation GCELLPWR2 different than the current one were GBFD-
G Allowed BSC6900 (Optional) used. 110703
larger than this value, linear
interpolation is performed for the
values in the lost measurement
reports based on the values in the
two measurement reports
preceding and following the lost
measurement reports. Otherwise,
the lost measurement reports will GBFD-
SET be discarded, and the value will be 110601
MRMISSCOU Allowed MR GCELLHOFIT recalculated when new GBFD-
NT Number Lost BSC6900 PEN(Optional) measurement reports arrive. 510501
When the number of the lost
SET measurement reports exceeds this
GCELLPWR3 parameter during a power control GBFD-
MRMISSNUM MRMissNumber BSC6900 (Optional) period, the power control stops. 117601
Antenna SET
MRRUATTEN Tributary 1 BTSRXUBP( Attenuation factor for the TMA of GBFD-
FACTOR1 Factor BSC6900 Optional) antenna tributary 1 111202
Switch of measurement report
collection within a specified scope.
Antenna SET
If the specified scope is a site, the
MRRUATTEN Tributary 2 BTSRXUBP( Attenuation factor for the TMA of GBFD-
switch applies to all the cells at the
FACTOR2 Factor BSC6900 Optional) antenna tributary 2 111202
site; if the specified scope is a cell,
the switch applies to the cell only.
The control switch of measurement
SET The switch of measurement report
report collection includes OFF (do
MRSCOPES MR Collection GMRSCOPE( collection within a specified scope GBFD-
not collect), ON_WITH_SDCCH
WITCH Scope Switch BSC6900 Mandatory) last configured takes effect. 111203
(collect measurement reports for
SDCCHs and TCHs), and
SET ON_WITHOUT_SDCCH (collect
MR Collection GMRCTRL(M measurement reports for TCHs GBFD-
ADD
MRSWITCH Control Switch BSC6900 andatory) only). 111203
BTSPPPLNK(
Optional) Maximum length of a received
ADD packet. The value of this
BTSMPLNK( parameter is negotiated at both GBFD-
MRU Max Receive Unit BSC6900 Optional) ends of a communication. 118601
ADD
AISSCFG(Opt Number of MSs used when the GBFD-
MS Number of MSs BSC6900 ional) offset information is collected 118201
Whether to collect the information
about the MSs of different
SET capabilities in a cell. This
MSCAPABLE MS Capability GCELLSOFT( parameter has no impact on GBFD-
STATSWITCH Statistic Switch BSC6900 Optional) services. 110501
Available capacity of the MSC.
This parameter is valid only when
MSC Available ADD the MSC pool function is enabled.
Capability<K GCNNODE(O It is set according to the actual GBFD-
MSCCAP User number> BSC6900 ptional) capacity of the MSC. 117401
ADD
GCNOPERAT
Length of NRI in OR(Mandator Number of bits occupied by the GBFD-
MSCNRILEN TMSI BSC6900 y) NRI in the TMSI 117401
Special NRI that is coded together
Whether to enable the MSC pool
with common NRIs. This
function on the BSC6900.
parameter is used to indicate that
The MSC pool function enables up
ADD the BSC routes the service
to 32 MSCs to provide services for
MSCNULLNR MSC NULL-NRI GCNOPERAT initiated by the MS to the MSC in GBFD-
mobile subscribers in a BSC6900.
I Value BSC6900 OR(Optional) non OFFLOAD state. 117401
With the MSC pool function, one
BSC6900 can be connected to
ADD multiple MSCs and the services in
Administrative state of the MSC.
MSCPOOLAL MSC Pool GCNOPERAT the BSC6900 are shared to each GBFD-
This parameter is valid only when
LOW Function Enabled BSC6900 OR(Optional) MSC in all MSC pools. 117401
the MSC pool function is enabled.
It is set according to the actual
MSC ADD operating state of the MSC. A call
Administrable GCNNODE(O accesses the MSC only when this GBFD-
MSCSTATUE State BSC6900 ptional) parameter is set to NORMAL. 117401
SET Protocol version of the MSC that is
GCELLCCUT connected to the BSC6900. The
MSC Version RANSYS(Opti supported signaling varies with the GBFD-
MSCVER Indication BSC6900 onal) protocol versions. 111804
SET
MSIPFAILIND GCELLTMR(O MSISDN prefix 1. When matching GBFD-
CHK
DELAY TREESTABLISH BSC6900 ptional) the
Callcall specified by the
reestablishment mobile
timer 110503
INNSPCH(Ma
number, the BSC6900 adds the
ndatory)
MSISDN prefix 1 according to the
STR
value of this parameter. For
CALLRESLO MSISDN prefix 2. When matching GBFD-
example, when the value of this
MSISDN MSISDN BSC6900 P(Mandatory) the
MSISDNcall specified
value by the mobile 111203
parameter is 123 and the mobile
number, the BSC6900 adds the
number to be matched is 456, the GBFD-
MSISDN prefix 2 according to the
SET call matching is considered 117701
value of this parameter. For
MSISDNPRE BSCBASIC(O MSISDN
successful prefix
if the3.corresponding
When matching GBFD-
example, when the value of this
FIX1 MSISDN prefix 1 BSC6900 ptional) the
MSISDNcall specified
is 123456. by the mobile 117702
parameter is 123 and the mobile
number, the BSC6900 adds the
number to be matched is 456, the GBFD-
MSISDN prefix 3 according to the
SET call matching is considered 117701
value of this parameter. For
MSISDNPRE BSCBASIC(O MSISDN
successful prefix
if the4.corresponding
When matching GBFD-
example, when the value of this
FIX2 MSISDN prefix 2 BSC6900 ptional) the
MSISDNcall specified
is 123456. by the mobile 117702
parameter is 123 and the mobile
number, the BSC6900 adds the
number to be matched is 456, the GBFD-
MSISDN prefix 4 according to the
SET call matching is considered 117701
value of this parameter. For
MSISDNPRE BSCBASIC(O MSISDN
successful prefix
if the5.corresponding
When matching GBFD-
example, when the value of this
FIX3 MSISDN prefix 3 BSC6900 ptional) the
MSISDNcall specified
is 123456. by the mobile 117702
parameter is 123 and the mobile
number, the BSC6900 adds the
number to be matched is 456, the GBFD-
MSISDN prefix 5 according to the
SET If "Options
call matching forisBSC Local Switch"
considered 117701
value of this parameter. For
MSISDNPRE BSCBASIC(O is set to PREFIXNUMBER,
successful and the
if the corresponding GBFD-
example, when the value of this
FIX4 MSISDN prefix 4 BSC6900 ptional) first
MSISDNdigitsisin123456.
the MSISDN of the 117702
parameter is 123 and the mobile
called or calling are the same as
number to be matched is 456, the GBFD-
the value of this parameter, the
SET call matching is considered 117701
BSC local switching function is
MSISDNPRE BSCBASIC(O successful if the corresponding GBFD-
enabled. For example, if two
FIX5 MSISDN prefix 5 BSC6900 ptional) MSISDN is 123456. 117702
numbers 135 and 139 are set in
the list, and the first three digits in
SET the MSISDN of the called or calling
MsisdnPrfxLis Prefix Number BSSLS(Optio are 135 or 139, the BSC local GBFD-
t2StartBscLs1 for BSC 1 BSC6900 nal) switching function is enabled. 117701
is set to PREFIXNUMBER, and the
first digits in the MSISDN of the
called or calling are the same as
the value of this parameter, the
If "Options for BSC Local Switch"
BSC local switching function is
is set to PREFIXNUMBER, and the
enabled. For example, if two
first digits in the MSISDN of the
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
MsisdnPrfxLis SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
t2StartBscLs1 Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
0 for BSC 10 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117701
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBscLs2 for BSC 2 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117701
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBscLs3 for BSC 3 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117701
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBscLs4 for BSC 4 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117701
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBscLs5 for BSC 5 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117701
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is set to PREFIXNUMBER,
are 135 or 139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBscLs6 for BSC 6 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117701
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBscLs7 for BSC 7 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117701
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBscLs8 for BSC 8 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117701
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBscLs9 for BSC 9 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117701
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBtsLs1 for BTS 1 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117702
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
MsisdnPrfxLis SET the MSISDN of the called or calling
BSC local switching function is
t2StartBtsLs1 Prefix Number BSSLS(Optio are 135 or 139, the BSC local GBFD-
enabled. For example, if two
0 for BTS 10 BSC6900 nal) switching function is enabled. 117702
numbers 135 and 139 are set in
the list, and the first three digits in
SET the MSISDN of the called or calling
MsisdnPrfxLis Prefix Number BSSLS(Optio are 135 or 139, the BSC local GBFD-
t2StartBtsLs2 for BTS 2 BSC6900 nal) switching function is enabled. 117702
is set to PREFIXNUMBER, and the
first digits in the MSISDN of the
called or calling are the same as
the value of this parameter, the
If "Options for BSC Local Switch"
BSC local switching function is
is set to PREFIXNUMBER, and the
enabled. For example, if two
first digits in the MSISDN of the
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBtsLs3 for BTS 3 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117702
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBtsLs4 for BTS 4 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117702
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBtsLs5 for BTS 5 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117702
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBtsLs6 for BTS 6 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117702
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET If
the"Options
MSISDN forofBSC Local Switch"
the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio is
areset to or
135 PREFIXNUMBER,
139, the BSC local and the GBFD-
enabled. For example, if two
t2StartBtsLs7 for BTS 7 BSC6900 nal) first digits function
switching in the MSISDN of the
is enabled. 117702
numbers 135 and 139 are set in
called or calling are the same as
the list, and the first three digits in
the value of this parameter, the
SET the MSISDN of the called or calling
BSC local switching function is
MsisdnPrfxLis Prefix Number BSSLS(Optio are 135 or 139, the BSC local GBFD-
enabled. For example, if two
t2StartBtsLs8 for BTS 8 BSC6900 nal) switching function is enabled. 117702
numbers 135 and 139 are set in
the list, and the first three digits in
SET the MSISDN of the called or calling
MsisdnPrfxLis Prefix Number BSSLS(Optio are 135 or 139, the BSC local GBFD-
t2StartBtsLs9 for BTS 9 BSC6900 nal) switching function is enabled. 117702
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBscLs Avoid Number for BSSLS(Optio BSC local switching function is GBFD-
1 BSC 1 BSC6900 nal) disabled. 117701
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBscLs Avoid Number for BSSLS(Optio BSC local switching function is GBFD-
10 BSC 10 BSC6900 nal) disabled. 117701
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBscLs Avoid Number for BSSLS(Optio BSC local switching function is GBFD-
2 BSC 2 BSC6900 nal) disabled. 117701
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBscLs Avoid Number for BSSLS(Optio BSC local switching function is GBFD-
3 BSC 3 BSC6900 nal) disabled. 117701
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBscLs Avoid Number for BSSLS(Optio BSC local switching function is GBFD-
4 BSC 4 BSC6900 nal) disabled. 117701
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBscLs Avoid Number for BSSLS(Optio BSC local switching function is GBFD-
5 BSC 5 BSC6900 nal) disabled. 117701
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBscLs Avoid Number for BSSLS(Optio BSC local switching function is GBFD-
6 BSC 6 BSC6900 nal) disabled. 117701
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBscLs Avoid Number for BSSLS(Optio BSC local switching function is GBFD-
7 BSC 7 BSC6900 nal) disabled. 117701
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBscLs Avoid Number for BSSLS(Optio BSC local switching function is GBFD-
8 BSC 8 BSC6900 nal) disabled. 117701
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBscLs Avoid Number for BSSLS(Optio BSC local switching function is GBFD-
9 BSC 9 BSC6900 nal) disabled. 117701
If the first digits in the MSISDN of
the called or calling are the same
SET as the value of this parameter, the
MsisdnSegLis Avoid Number for BSSLS(Optio BTS local switching function is GBFD-
t2AvoidBtsLs1 BTS 1 BSC6900 nal) disabled. 117702
If the first digits in the MSISDN of
the called or calling are the same
MsisdnSegLis SET as the value of this parameter, the
t2AvoidBtsLs1 Avoid Number for BSSLS(Optio BTS local switching function is GBFD-
0 BTS 10 BSC6900 nal) disabled. 117702
If the first digits in the MSISDN of
the called or calling are the same
SET as the value of this parameter, the
MsisdnSegLis Avoid Number for BSSLS(Optio BTS local switching function is GBFD-
t2AvoidBtsLs2 BTS 2 BSC6900 nal) disabled. 117702
If the first digits in the MSISDN of
the called or calling are the same
SET as the value of this parameter, the
MsisdnSegLis Avoid Number for BSSLS(Optio BTS local switching function is GBFD-
t2AvoidBtsLs3 BTS 3 BSC6900 nal) disabled. 117702
If the first digits in the MSISDN of
the called or calling are the same
SET as the value of this parameter, the
MsisdnSegLis Avoid Number for BSSLS(Optio BTS local switching function is GBFD-
t2AvoidBtsLs4 BTS 4 BSC6900 nal) disabled. 117702
If the first digits in the MSISDN of
the called or calling are the same
SET as the value of this parameter, the
MsisdnSegLis Avoid Number for BSSLS(Optio BTS local switching function is GBFD-
t2AvoidBtsLs5 BTS 5 BSC6900 nal) disabled. 117702
If the first digits in the MSISDN of
the called or calling are the same
SET as the value of this parameter, the
MsisdnSegLis Avoid Number for BSSLS(Optio BTS local switching function is GBFD-
t2AvoidBtsLs6 BTS 6 BSC6900 nal) disabled. 117702
If the first digits in the MSISDN of
the called or calling are the same
SET as the value of this parameter, the
MsisdnSegLis Avoid Number for BSSLS(Optio BTS local switching function is GBFD-
t2AvoidBtsLs7 BTS 7 BSC6900 nal) Maximum
disabled. number of Channel 117702
If the firstmessages
Request digits in the MSISDN
that can be of
the called or calling are
sent by an MS in an immediate the same
SET as the value of
assignment procedure.this parameter, the
MsisdnSegLis Avoid Number for BSSLS(Optio BTS local switching
After the MS initiates the function is GBFD-
t2AvoidBtsLs8 BTS 8 BSC6900 nal) disabled.
immediate assignment procedure, 117702
If the first digits in the MSISDN of
itthe
always listens to the messages
called or calling are the same
SET on BCCHofand
as the value thisallparameter,
the common the
MsisdnSegLis Avoid Number for BSSLS(Optio control
BTS local channels
switching(CCCHs) in is
function the GBFD-
t2AvoidBtsLs9 BTS 9 BSC6900 nal) CCCH
disabled. group to which the MS 117702
belongs. If the MS does not
receive Immediate Assignment or
EN Quick PBGT SET Whether to enable "Triggering the
Immediate Assignment Extend
MSLEVSTRQ HO ALG When GCELLHOFA quick PBGT algorithm only when GBFD-
messages, it retransmits Channel
PBGT MS Leaves BTS BSC6900 ST(Optional) an MS is far from the BTS" 510102
Request messages at a specified
interval.
SET If the downlink quality is poor, the
MSMAXRETR GCELLCCBA MS may send SABM frames to the GBFD-
AN MS MAX Retrans BSC6900 SIC(Optional) BTS multiple times. 111003
PDCH Downlink multiplex
SET threshold in the Mobile Station
MSP Control MSPCMD(Ma Receiver Diversity of
Control command (MSRD)
the MSPmode. GBFD-
SET
MSPCMD Command BSC6900 ndatory) When this parameter
switchover protection is set to "80",
group 111701
BTSFMUABP(
the MS does not adopt the MSRD
Optional)
mode. When the number of the
SET
TBF on the PDCH that is assigned
MSRDMCSLE MSRD MCS BTSAPMUBP
GCELLPSCH Threshold of the MS Receiver GBFD-
to the MS exceeds this parameter
V Threshold BSC6900 (Optional)
M(Optional) Diversity (MSRD) mode 510801
or the coding rate of the PDCH is
SET Number of the subrack where the
smaller than the threshold of the
BTSDATUBP( board is located. The management
MSRD PDCH SET The M criteria
coding supports
rate in MSRD setting
mode, the
Optional) board refers to the TMU or RXU
MSRDPDCHL Multiplex GCELLPSCH minimum valuestofor
MS is required the downlink
adopt the MSRD GBFD-
SET that directly communicates with the
EV Threshold BSC6900 M(Optional) receive
mode. level of neighboring cells. 510801
BTSDEMUBP board. The configuration of this
The M criteria is met only when ,
(Optional) parameter must be consistent with
Estimated downlink level of
Subrack No. of SET the actual physical connection.
neighboring cells >= ("Min DL level
Management BTSDHEUBP( Otherwise, the board may not work GBFD-
on candidate Cell" + "Min Access
MSRN Board BSC6900 Optional) properly. 111202
Level Offset")
Estimated uplink level of GBFD-
ADD neighboring cells >= ("Min UL level 110601
When the number of received
Min DL level on GEXT2GCEL on candidate Cell" + "Min Access GBFD-
measurement reports on the
MSRXMIN candidate Cell BSC6900 L(Optional) Level Offset") 510501
downlink transmission quality
(Packet Downlink Ack/Nack
MS Rx Quality SET message) is greater than or equal
MSRXQUALS Statistic GCELLNC2P to this threshold, emergency GBFD-
TATTHRSH Threshold BSC6900 ARA(Optional) reselection decision is made. 116201
Duration of the flow control timer F
SET of the MS. The MS sends the flow
MS Flow Control BSSGPPARA( control message according to this GBFD-
MSTF Timer BSC6900 Optional) duration. 119001
If no handshake message is
SET received from the peer within the
MSTSERVAC Master Service GBSCREDGR delay, the master service is GBFD-
TDELAY Active Delay BSC6900 P(Optional) activated. 113725
SET
Maximum TX GCELLSERV
MSTXPWRM Power for Access PARA(Option Maximum TX power for the MS to GBFD-
AX PCH BSC6900 al) access the PCH 114101
Self-healing
Switch for SET Switch for the self-healing of the
Memory SLFSLVSW(O OMU when the OMU process
Usage threshold of the CPU for
MSW Overload BSC6900 ptional) memory is overloaded None
called access. If the usage of the
CPU exceeds the threshold, the
SET called access request is
MTCACCESS MTC Access BSCFCPARA( transferred to other CPU for GBFD-
CPURATE CPU Rate BSC6900 Optional) processing. 111705
CHK
E1T1CRS(Ma
MTHD Method BSC6900 ndatory) Detection method None
ADD
MTP3LNK(Ma GBFD-
MTP2LNKN MTP2 link No. BSC6900 ndatory) Identify an MTP2 link 111804
ADD
SCTPLNK(Op GBFD-
MTU MTU value BSC6900 tional) Maximum transport unit 118602
SET
ETHPORT(Op
MTU MTU[Byte] BSC6900 tional) Maximum transmission unit None
ADD
PPP mux framing MPGRP(Optio Frame timeout duration of the PPP
MUXTIME out-time[us] BSC6900 nal) multiplexing group None
GBFD-
ADD 118604
IPMUX(Mand GBFD-
MUXTYPE IP MUX Type BSC6900 atory) IP packet multiplexing type 118610
SET
Min Quantity of BTSCABPAR Minimum number of reserved GBFD-
MWTRXNO Working TRXs BSC6900 A(Optional) working status TRXs of the cabinet 111202
STR
MYDISCRIMI My discriminator IPCHK(Option Error control is performed on the I GBFD-
NATOR of BFD BSC6900 al) frame sentdescription
BFD local over the LAPDm
mark layer 118609
System parameter in the LAPD
between the BTS and MS. If the
protocol. The value of this
MS detects errors in an I frame,
SET parameter specifies the maximum
the BTS should resend the I frame.
BTSRINGATT number of times when a frame is GBFD-
This parameter indicates the
N200 N200 BSC6900 R(Optional) retransmitted. 117801
maximum number of
retransmissions of the I frame.
SET For the function of N200 and the
N200 of GCELLCCTM effect of the parameter, see the GBFD-
N200ESTAB Establish BSC6900 R(Optional) description of "T200 SDCCH". 111002
frame sent over the LAPDm layer
between the BTS and MS. If the
MS detects errors in an I frame,
the BTS should resend the I frame.
Error control is performed on the I
This parameter indicates the
frame sent over the LAPDm layer
maximum number of
between the BTS and MS. If the
retransmissions of the I frame on
MS detects errors in an I frame,
the FACCH (a full-rate channel).
the BTS should resend the I frame.
SET For the function of N200 and the
This parameter indicates the
N200 of GCELLCCTM effect of the parameter, see the GBFD-
maximum number of
N200FFULL FACCH/Full Rate BSC6900 R(Optional) description of "T200 SDCCH". 111002
retransmissions of the I frame on
the FACCH (a half-rate channel).
Whether the BSC6900 sends the
SET Error
For the control
function is performed
of N200 and on the I
LAPDm N200 parameter to the
N200 of GCELLCCTM frame
effect of sent theover the LAPDm
parameter, see the layer GBFD-
BTS.
N200FHALF FACCH/Half Rate BSC6900 R(Optional) between
description theofBTS "T200 andSDCCH".MS. If the 111002
If this parameter is set to YES, the
MS detects errors in an I frame,
BSC sends the LAPDm N200
the BTS should resend the I frame.
SET Error controlIf is
parameter. performed
this parameter onisthe setI
This parameter indicates the
N200PARAS Use LAPDm GCELLCCTM frame
to NO,sent over the LAPDm
the BSC6900 does not layer GBFD-
maximum
Maximum number
value of
WITCH N200 BSC6900 R(Optional) between
send the the LAPDm BTSofN200 the MS.
and N3101 If the
parameter. 111002
retransmissions
counter. In the of
dynamicthe I frame
MS detects errors in an Iuplink frame,
during
allocation the mode,
multi-frame the network release. side
the BTS should resend the I frame.
SET Error
For thecontrol
function is performed
of N200 andon the I
enables
This parameter multipleindicates
MSs to share the the
GCELLCCTM frame
effect sent theover the LAPDm layer
same of
maximum uplink parameter,
channel
number of throughsee the the GBFD-
N200REL N200 of Release BSC6900 R(Optional) Maximum
between
description thevalue
of BTS ofand
"T200 the N3101
MS.
SDCCH". If the 111002
USF value in theofdownlink
retransmissions the I frame dataon
counter.
MS detects When errorsthe in uplink
an I frame,
block.
the After the network side
SACCH.
transmission
the BTS should ends,resend if thethe network
I frame.
SET allocates
For the the USF
function to
oflast
N200 the uplink
and the
side receives the
This parameter indicates the RLC data
GCELLCCTM TBF
effect (the
of uplink
the TBF is set
parameter, see upthe GBFD-
block,
maximum the network
number side sends an
N200SACCH N200 of SACCH BSC6900 R(Optional) Maximum
successfully),
description value of of
N3101 the isN3105
started.
FAI=1 uplinkofpacket
retransmissions
"T200
of
SDCCH".
the I frame
111002
counter.
The network Afterside the downlink
waits for the TBFon is
RLC
acknowledged/unacknowledged
the SDCCH.
set up data
uplink successfully,
block sent thebyN3105 the MS. is If
SET message
For the functionand starts of N200 N3103. Ifthe
andAfter the
started
the RLCon the network
uplink data block side. sent by
GCELLCCTM packet
effect control
of the parameter, acknowledgement see the GBFD-
the MSdownlinkis valid, RLC data is
N3101 block
reset. is
N200SDCCH N200 of SDCCH BSC6900 R(Optional) message
description is of
not"T200
received SDCCH". in the 111002
added
Otherwise, with the value of N3101on
RRBP domain is
specified
Counter ontime, N3103side, is increased
SET the network
increased onthe theDTE
side, the validside.
network packet
on the network
recording side andtimes the uplink
GCELLSTAN When thisthe
acknowledged counterchecking
messageis overflowed,
packet
"Parameter of theDTETBF [N393]". After
Maximum Value DARDOPTPA responded
the current by uplink MS isisreceived
released GBFD-
acknowledged/unacknowledged
link integrity
N3101 of N3101 BSC6900 RA(Optional) in the uplink is
abnormally. RLC verified
data according
block in the to 114101
message
"Parameter is of
retransmitted.
DTE [N392]", When the
RRBP
Counter domain.
on the In this
DTE side, thecase, N3105
SET this
state counter
is restored. is overflowed,
That
is reset.
recording Otherwise,
the checking theis: if a fault
value
times of
GCELLSTAN timer
occursT3169 on theisDTE started.side, Afterandthis the
N3105
"Parameter is increased
of theDTEcurrentand
[N393]". the After
Maximum Value DARDOPTPA timer
system expires,
isdata
found normal inTBFthe is GBFD-
downlink
link integrity is block
verified of according
the RRBP to is
N3103 of N3103 BSC6900 RA(Optional) released
checking abnormally.
timesWhen "Parameter of DTE 114101
retransmitted.
"Parameter of DTE [N392]", the N3105 is
SET [N392]"
overflowed, out of T3195the checking
is started. times
After
state is restored. That is: if a fault
GCELLSTAN "Parameter
the timer T3195 of DTE [N393]",
expires, the the
occurs on the DTE side, and the
Maximum Value DARDOPTPA system
current is switched to the normal
system TBF is found is released
normal in the GBFD-
N3105 of N3105 BSC6900 RA(Optional) state. If the system operates
abnormally. 114101
checking
Counter on times
the "Parameter
DTE side. After of DTE link
normally on the DTE side, and the
[N392]"
integrity out of the checking
is verified accordingtimes to
system is found faulty in the
"Parameter of DTE [N393]", [N391]", the
checking times "Parameter of DTE
Parameter of ADD system
global state is switched
query request to the normal is GBFD-
[N392]" out of the checking times
N391 DTE [N391] BSC6900 BC(Optional) state.
originatedIf theon system
the DTE operates
side. 510002
"Parameter of DTE [N393]", the
normally on the DTE side, and the
system is switched to the faulty
system is found faulty in the
state. "Parameter of DTE [N392]"
checking times "Parameter of DTE
Parameter of ADD must be smaller than "Parameter GBFD-
[N392]" out of the checking times
N392 DTE [N392] BSC6900 BC(Optional) of DTE [N393]". 510002
"Parameter of DTE [N393]", the
system is switched to the faulty
state. "Parameter of DTE [N393]"
Parameter of ADD must be greater than "Parameter GBFD-
N393 DTE [N393] BSC6900 BC(Optional) of DTE [N392]". 510002
Whether to support the network
assisted cell change (NACC). The
NACC is used in the network
control modes NC0, NC1 or NC2.
The NACC enables the network to
notify the MS of the system
information of the neighboring cell
when the MS is in the packet
SET transmission state. In this way, the
GCELLGPRS( MS can reselect a cell in a shorter GBFD-
NACCSPT Support NACC BSC6900 Optional) time. 116301
ADD
OPC(Mandato GBFD-
NAME OSP name BSC6900 ry) Name of the OSP 111804
ADD
N7DPC(Mand GBFD-
NAME DSP name BSC6900 atory) Name of the DSP 111804
ADD
Signalling Route MTP3RT(Man GBFD-
NAME name BSC6900 datory) Name of an MTP3 route 111804
ADD
Signalling link set MTP3LKS(Ma GBFD-
NAME name BSC6900 ndatory) Name of the signalling link set 111804
ADD
Signalling link MTP3LNK(Ma GBFD-
NAME name BSC6900 ndatory) Name of the MTP3 link 111804
ADD
Adjacent Node ADJNODE(M GBFD-
NAME Name BSC6900 andatory) Name of the adjacent node 118605
ADD
Local entity M3LE(Mandat Local entity name. The local entity GBFD-
NAME name BSC6900 ory) name must be unique. 118602
ADD
Destination entity M3DE(Mandat GBFD-
NAME name BSC6900 ory) Name of the destination entity 118602
ADD
NBR2GNCEL Neighbor 2G Cell G2GNCELL( MRFD-
LNAME Name BSC6900 Mandatory) Name of a cell 210301
Uniform number of a neighboring
cell index within a BSC, which
ADD uniquely identifies a cell.
NBR3GNCEL Neighbor Cell G3GNCELL( The value range of the index of a MRFD-
LID Index BSC6900 Mandatory) 3G external cell is 5048 to 8047. 210301
ADD
NBR3GNCEL Neighbor Cell G3GNCELL( MRFD-
LNAME Name BSC6900 Mandatory) Name of a neighboring cell 210301
When this switch is on, it indicates
SET that the data of the adjacent cell is
BTSAUTOPL generated automatically. When this
NBRCELLSW Neighbor Cell ANCFG(Optio switch is off, it indicates that these GBFD-
ITCH Plan Switch BSC6900 nal) data must be configured manually. 510702
ADD
Neighbour Cell G2GNCELL( MRFD-
NBRCI CI BSC6900 Mandatory) Cell ID of a neighboring cell 210301
ADD
Neighbour Cell G2GNCELL( Local Area Code (LAC) of a MRFD-
NBRLAC LAC BSC6900 Mandatory) neighboring cell 210301
ADD
Neighbour Cell G2GNCELL( Mobile Country Code (MCC) of a MRFD-
NBRMCC MCC BSC6900 Mandatory) neighboring cell 210301
ADD
Neighbour Cell G2GNCELL( Mobile Network Code (MNC) of a MRFD-
Whether the PCU of the cell
NBRMNC MNC BSC6900 Mandatory) neighboring cell 210301
supports the 64 neighboring cells.
This parameter determines the GBFD-
SET Whether
capabilitytoofsupport
reporting thethe
network
number 116201
Support 64 GCELLGPRS( control
of the neighboring cells of enables
2 (NC2). The NC2 the BSC GBFD-
Whether to involve the load of the
NBRSPT64 Neighbour Cells BSC6900 Optional) the network
in the NACCside and to
NC2control the cell
function. 116301
target cell in the algorithm for NC2
reselection for the MS when the
SET cell reselection. If this parameter is
MS reports the measurement
NC2 Load BSCPSSOFT set to Support, the load of the
report of the local cell and the
NC2LoadRes Reselection PARA(Option target cell is involved in the GBFD-
neighboring cell.When this
el Switch BSC6900 al) algorithm for NC2 cell reselection. 116201
parameter is set to "YES" and
"Network Control Mode" in "SET
SET GCELLPSBASE"
A set of NCCs is set
of the to to
cells "NC2",
Network color code that is be
GCELLGPRS( the networkbyside
measured the can
MS. control
This the GBFD-
ADD provided by the telecom operator.
NC2SPT Support NC2 BSC6900 Optional) cell reselection
parameter for the MS. 116201
GCELL(Optio The NCC isisused an information
to identify
nal) element
networks(IE) fromin area
the system
to area. The
ADD information
NCC is unique typenationwide.
2 and 6
GEXT2GCEL messages.
The BCC and the NCC form the MRFD-
NCC NCC BSC6900 L(Mandatory) If a bit of the value of this
BSIC. 210301
parameter is set to 1, the MS
ADD Network color code. It is used to
reports the corresponding
GCELLQUICK uniquely identify different public
measurement report to the BTS.
SETUP(Optio land mobile network (PLMN) of the MRFD-
The value of this parameter has a
NCC NCC BSC6900 nal) adjacent country. 210301
byte (eight bits). Each bit maps
SET with an NCC (0~7) and the most GBFD-
GCELLIDLEB significant bit corresponds to NCC 110401
ASIC(Optional 7. If bit N is 0, the MS does not GBFD-
NCCPERMIT NCC Permitted BSC6900 ) measure the cell level of NCC N. 110402
NCC bitmap of the measurement
SET report sent by the MS. The MS GBFD-
GCELLEXTM reports only the NCC bitmap of the 110801
NCCPERMIT SRPARA(Opti BSIC and the cell measurement GBFD-
ED NCC Permitted BSC6900 onal) report that matches the bitmap. 110802
For the purpose of accurately
reflecting the radio environment of
a network, filtering is performed on
the measured values in several
consecutive measurement reports.
For the purpose of accurately
This parameter indicates the
reflecting the radio environment of
Neighbor Cell SET number of measurement reports
a network, filtering is performed on
NCELLFILTE Filter Length MR GCELLHOFA used for the filtering of neighboring GBFD-
the measured values in several
R Number BSC6900 ST(Optional) cell information. 510102
consecutive measurement reports.
This parameter indicates the GBFD-
SET number of measurement reports 110601
NCELLFLTLE Filter Length for GCELLHOFIT used for the filtering of neighboring GBFD-
N Ncell RX_LEV BSC6900 PEN(Optional) cell signal strength. 510501
NeighborCell SET
NcellInterFLe Interfere Level OTHSOFTPA Neighboring cell interference level GBFD-
velThres0 Thresh 0 BSC6900 RA(Optional) threshold 0 510901
NeighborCell SET
NcellInterFLe Interfere Level OTHSOFTPA Neighboring cell interference level GBFD-
velThres1 Thresh 1 BSC6900 RA(Optional) threshold 1 510901
NeighborCell SET
NcellInterFLe Interfere Level OTHSOFTPA Neighboring cell interference level GBFD-
velThres2 Thresh 2 BSC6900 RA(Optional) threshold 2 510901
NeighborCell SET
NcellInterFLe Interfere Level OTHSOFTPA Neighboring cell interference level GBFD-
velThres3 Thresh 3 BSC6900 RA(Optional) threshold 3 510901
NeighborCell SET
NcellInterFLe Interfere Level OTHSOFTPA Neighboring cell interference level GBFD-
velThres4 Thresh 4 BSC6900 RA(Optional) threshold 4 510901
NeighborCell SET
NcellInterFLe Interfere Level OTHSOFTPA Neighboring cell interference level GBFD-
velThres5 Thresh 5 BSC6900 RA(Optional) threshold 5 510901
NeighborCell SET
NcellInterFLe Interfere Level OTHSOFTPA Neighboring cell interference level GBFD-
velThres6 Thresh 6 BSC6900 RA(Optional) threshold 6 510901
NeighborCell SET
NcellInterFLe Interfere Level OTHSOFTPA Neighboring cell interference level GBFD-
velThres7 Thresh 7 BSC6900 RA(Optional) threshold 7 510901
GBFD-
SET 510301
NCHOCBLOC NCH Occupy GCELLGSMR Number of blocks occupied by the GBFD-
KNUM Block Number BSC6900 (Optional) NCH in the group call service 510302
GBFD-
SET Number of the start block occupied 510301
NCHSTARTB GCELLGSMR by the NCH in the group call GBFD-
LOCK NCH Start Block BSC6900 (Optional) service 510302
send measurement reports to the
network . The MS shall only
perform autonomous cell re-
selection when the reselection is
triggered by a downlink signaling
failure or a random access
failure.When this parameter is set
to NC2 and "Support NC2" in "SET
SET GCELLGPRS" is set to "YES", the
Network Control GCELLPSBA network side can control the cell GBFD-
NCO Mode BSC6900 SE(Optional) reselection for the MS. 119107
ADD
XPUVLAN(Ma MRFD-
NETMASK Net Mask BSC6900 ndatory) IP address mask of the VLAN 210301
Minimum interval between two
consecutive emergency handovers GBFD-
SET performed by an MS. During this 110601
NEWURGHO Min Interval for GCELLHOCT interval, no emergency handover is GBFD-
MININTV Emerg. HO BSC6900 RL(Optional) allowed. 510501
ADD
Forward Route OMUIPRT(Ma
NEXTHOP Address BSC6900 ndatory) IP address of the next hop. None
ADD
Forward route IPRT(Mandat
NEXTHOP address BSC6900 ory) Next hop None
ADD
Forward route IPRTBIND(Ma
ADD
NEXTHOP address BSC6900 ndatory) Next hop None
BTSIPRT(Man
datory) This parameter is related to the
ADD paging channel of the system.
Forward Route BTSIPRTBIN There are three network operation GBFD-
NEXTHOP Address BSC6900 D(Mandatory) IP address
modes: of theoperation
network next hop mode I, 118611
network operation mode II, and
ADD network operation mode III.
OPC(Mandato Network operation mode I is used GBFD-
NI Network ID BSC6900 ry) when
NetworktheID
system is configured with 111804
the Gs interface. Network
operation mode II is used when the
DLD Name of the file to be downloaded.
system is not configured with the
Download file TCFILE(Mand The file name must be complete MRFD-
Gs interface and the PCCCH is not
NM name BSC6900 atory) and does not contain a wildcard. 210301
configured. Network operation
mode III is used when the system
SET is not configured with the Gs
Network GCELLPSBA interface and the PCCCH is GBFD-
NMO Operation Mode BSC6900 SE(Optional) configured. 119108
SET
No Mains Supply BTSALMPOR GBFD-
NMSASN Alarm Slot No. BSC6900 T(Mandatory) No Mains Supply Alarm Slot No. 111202
ADD
Decisions of no-downlink
Adjacent Node ADJNODE(M When a certainreport
number of no- GBFD-
measurement handovers
NODET Type BSC6900 andatory) Type of the
downlink adjacent node
measurement 118605
can be made only whenreports
the are
received
number ofconsecutively
consecutive andno- the GBFD-
Cons.No Dl SET uplink
downlinkreceive quality is no
measurement smaller
reports in 110601
NODLMRHO Mr.HO Allowed GCELLHOEM than this parameter,
the current call is no no-downlink
larger than GBFD-
ALLOWLIMIT Limit BSC6900 G(Optional) measurement
this parameter.report emergency 510501
handovers are triggered. No-
GBFD-
downlink measurement report
SET Whether to enable the no-downlink 110601
emergency handovers choose the
NODLMRHO No Dl Mr.HO GCELLHOEM measurement report handover GBFD-
inter-cell handover mode
EN Allowed BSC6900 G(Optional) algorithm 510501
preferentially; however, if no
candidate cells are available and GBFD-
SET intra-cell handover is enabled in 110601
Normal output capacity of the
NODLMRHO No Dl Mr.Ul Qual GCELLHOEM the current cell, intra-cell GBFD-
battery group in specific
QUALLIMIT HO Limit BSC6900 G(Optional) handovers are triggered. 510501
discharging conditions (such as
discharge rate, temperature, and
SET final voltage). Generally, the
NOMINALCA Norminal BTSPMUBP( parameter is based on 10-hour GBFD-
PACITY Capacity{AH} BSC6900 Optional) discharge rate. 111202
Whether to enable the III power
NONAMRCAL Allow III Power SET control algorithm for Non-AMR
LPCALLOWE Control For Non- GCELLPWR3 calls. If enabled, power control is GBFD-
D AMR BSC6900 (Optional) When the ANT_A
performed tributary
on Non-AMR antenna
calls. 117601
current abnormally check mode is
SET
set to Mode 3, the parameter ALD
GCELLNWCT
Current Prompt Alarm is checked
NONDRXPER RLMSRPARA( Period when the cell is in the non- GBFD-
by periodical pulse. The periodical
IOD Non-DRX Period BSC6900 Optional) When the ANT_B tributary antenna
DRX state 119107
pulse consists of antenna over-
current abnormally check mode is
current duration and normal
set to Mode 3, the parameter ALD
A ALD Cur-Minor SET current duration. This parameter is
Current Prompt Alarm is checked
NormalCurDu Alarm N-Cur BTSRXUBP( the ANT_A tributary antenna MRFD-
by periodical pulse. The periodical
rA Duration BSC6900 Optional) normal current duration. 210304
pulse consists of antenna over-
current duration and normal
B ALD Cur-Minor SET current duration. This parameter is
NormalCurDu Alarm N-Cur BTSRXUBP( the ANT_B tributary antenna MRFD-
rB Duration BSC6900 Optional) normal current duration. 210304
Whether to allow the cell normal
reselection. If this parameter is set
to PERMIT and "NC2 Load
Reselection Switch" is set to
Cell Normal SET Support, the load of the target cell
NORMALRES Reselection GCELLNC2P is involved in the algorithm for NC2 GBFD-
ELALLOW Allowed BSC6900 ARA(Optional) cell reselection. 116201
SET
Normal Work BTSCABPAR Normal work temperature GBFD-
NORTHD TEMP Threshold BSC6900 A(Optional) threshold of the cabinet 111202
Whether to discard paging
messages without TMSIs and all-
NOTMSIALLC SET cell paging messages that
Maximum number of measurement
ELLPAGINGL Discard TMSI All OTHSOFTPA considerably increase the load on GBFD-
periods in which there is no traffic.
IMITFLAG Cell Paging BSC6900 RA(Optional) the BSC system 111705
If the number of measurement
periods in which there is no traffic
If the BTS works in fallback mode
SET reaches this parameter, the BTS
and uplink VGCS connection is
Statistical Period GTRXRLALM( reports an alarm indicating that GBFD-
idle for a period specified by this
NOTRASP of No-traffic BSC6900 Optional) there is no traffic. 111004
parameter, the BTS disables the
VGCS connection automatically.
SET This parameter is valid only for
NOVGCSTIM No VGCS Call BTSFALLBAC user-originated VGCS calls and is GBFD-
E Time BSC6900 K(Optional) For thefor
invalid purpose of accurately
fixed VGCS calls. 510309
reflecting the radio environment of
Number of
a network, filtering is performed on
TRACERT TRC
the measured values in several
Packages Per IPADDR(Optio Number of TRACERT packets sent
consecutive measurement reports.
NQUERIES TTL BSC6900 nal) For the purpose
to each TTL of accurately None
This parameter indicates the
reflecting the radio environment of
Filter Length for number of enhanced measurement
a network,
Controls thefiltering
values isofperformed
the on
SDCCH SET reports received on a signaling
the measured values in several
NRBSDCCHF NBR_RCVD_BL GCELLHOFIT FDD_Indic0
channel usedfield, the the
to filter GBFD-
consecutive measurement reports.
FLEN OCK BSC6900 PEN(Optional) NR_OF_FDD_CELLS
NBR_RCVD_BLOCKSfield, value.and 117501
This parameter indicates
the FDD_Cellinformation field in the
Filter Length for number
2quater ofand enhanced
MI when measurement
3G
TCH SET reports
neighboring cellson
received witha service
scrambling
NRBTCHFFL NBR_RCVD_BL GCELLHOFIT channel
code 0 areused to filter the
present. GBFD-
EN OCK BSC6900 PEN(Optional) NBR_RCVD_BLOCKS
When this parameter is value. set to YES, 117501
ADD
FDD_Indic0 is set to 1, the
NSE(Mandato
ADD NR_OF_FDD_CELLS
Network resource indication count that
does
ry)
NRIMSCMAP( not include
specifies a cellsnode
CN with in scrambling
the MSC GBFD-
ADD
NRI NRI Value BSC6900 Mandatory) code 0, and FDD_Cellinformation
NSVC(Mandat pool 117401
also does not include cells with
ory)
scrambling code 0;
ADD Identifies the mapping relation
When this parameter is set to NO,
NSVLLOCAL(
NRISGSNMA from the NRI to the SGSN uniquely GBFD-
FDD_Indic0 is set to 1, the
NRI NRI Value BSC6900 Mandatory)
P(Mandatory) with the operator name 119701
NR_OF_FDD_CELLS count
ADD
includes cells with scrambling code
NSVLREMOT
Support SET 0, and FDD_Cellinformation also
E(Mandatory)
NRofFDDCell NR_of_FDD_cell OTHSOFTPA includes cells with scrambling code GBFD-
ADD
Flag s Writing BSC6900 RA(Optional) 0. 111101
PTPBVC(Man
datory)
BLK
PTPBVC(Man GBFD-
NSEI NSE Identifier BSC6900 datory) Identifies a unique NSE 119001
For the purpose of accurately
reflecting the radio environment of
ADD
a network, filtering is performed on
GCELLQUICK The identifier of a network service
the measured values in several
SETUP(Optio entity (NSE).An NSE manages a GBFD-
consecutive measurement reports.
NSEI NSE Identifier BSC6900 nal) group of NSVCs. 119001
This parameter indicates the
number of measurement reports GBFD-
NCell Filter SET received on signaling channels 110601
NSIGSTRFLT Length for GCELLHOFIT used for the filtering of neighboring GBFD-
LEN SDCCH Level BSC6900 PEN(Optional) cell signal strength. 510501
If the inlet temperature is between
"High Temperature Critical Point"
SET and "Low Temperature Critical
GCELLLCS(O Whether
Point" and the
thecell is located
difference in the
between GBFD-
NSLATI NS Latitude BSC6900 ptional) If the outlet
south latitudetemperature
or north is
latitude 115402
the inlet temperature and the
between "High Temperature
ambient temperature reaches the
Critical Point" and "Low
ADD value
NSVC ofID,
this parameter,
identifies the
Temperature CriticalaPoint"
unique and the
NSVC(Mandat temperature
NSVC. This control
ID must system
be negotiated GBFD-
ADD difference between the outlet
NSVCI NSVC Identifier BSC6900 ory) controls
with the difference
the peer SGSN. between the 510002
NSVC(Mandat temperature and the inlet
inlet and outlet temperatures as
ory) temperature reaches the value of
well as the difference between the
BLK this parameter, the temperature
inlet temperature and the ambient
NSVC(Mandat control
NSVC index,systemidentifies
controlsathe unique GBFD-
temperature.
NSVCIDX NSVC Index BSC6900 ory) difference
NSVC. between the inlet and 510002
In multi-mode scenario, the value
outlet temperatures as well as the
of this parameter in one mode
difference between the inlet
Normal SET must be the same as the value of
temperature and the ambient
Temperature BTSDHEUBP( the corresponding parameter in GBFD-
temperature.
NTDI Delta Tin BSC6900 Optional) another mode. 111202
In multi-mode scenario, the value
of this parameter in one mode
Normal SET must be the same as the value of
Temperature BTSDHEUBP( the corresponding parameter in GBFD-
NTDO Delta Tout BSC6900 Optional) another mode. 111202
SET
GCELLGSMR Number of retransmissions of the GBFD-
NY2 Ny2 BSC6900 (Optional) VGCS UPLINK GRANT message 510301
SET
OAMMINBWK OAM flow min QUEUEMAP( Minimum guarantee bandwidth GBFD-
EY bandwidth switch BSC6900 Optional) switch of the OAM stream 111202
SET
BTSANTANG
OBJECTTYP LE(Mandatory MRFD-
E Operate Object BSC6900 ) Operation object 210602
STR
TRXBURSTT
OBJECTTYP ST(Mandatory GBFD-
E Object Type BSC6900 ) Type of the object 111207
OML/ESL/EML SET
LAPD Downlink BTSLAPDWS Size of the OML/ESL/EML GBFD-
OMLWS Window Size BSC6900 (Optional) Downlink LAPD window 118601
SWP
BTSBRD(Man GBFD-
OPTP Operation Type BSC6900 datory) Type of the operation 111202
SET
BTSFORBIDT The operation type can be GBFD-
OPTYPE Operate Type BSC6900 S(Mandatory) "FORBID" or "RESTORE". 111202
If "Port Type" is set to
"TOPEXTOUTPORT", this
ADD
parameter determines the
GNRNC(Man Iur-g signaling point index of an MRFD-
extended E1/T1 port through which
OPX OPX BSC6900 datory) internal RNC in GU mode 211402
the timeslots on the source E1/T1
ADD port are used by other boards. If
BTSTOPCON "Port Type" is set to
Originally E1/T1 FIG(Mandator "TOPEXTINPORT", this MRFD-
CON
ORIPORT Port No. BSC6900 y) parameter is set 255. 211501
PATCH(Optio
nal)
LOD
PATCH(Optio MRFD-
OT Operation type BSC6900 nal) One of thetype
Operation parameters that decide
of the command. 210401
Ordinary frequency. Multiple
the underlay and overlay areas in
ADD frequencies are separated by "&".
an enhanced IUO cell. The
GCELLQUICK For example, "22&33&44&55" are
underlay and overlay areas are
SETUP(Optio Whether
allocated toto assign
TRXs in channel
ascending GBFD-
decided by "OtoU HO Received
OTHERFREQ Other Frequency BSC6900 nal) requests
order. initiated in the underlay 110101
Level Threshold", "UtoO HO
subcell to the overlay or underlay
Received Level Threshold",
subcells according to "UL Subcell
OtoU HO SET "RX_QUAL Threshold", "TA
General Overload Threshold". If
OTOURECEI Received Level GCELLHOIU Threshold", and "TA Hysteresis" GBFD-
the load of the underlay is higher
VETH Threshold BSC6900 O(Optional) together. 113201
than "UL Subcell General Overload
SET Threshold", incoming calls in the
UL Subcell GCELLHOED underlay subcell will be
The timer is used to set the time
OUTASSOPT Assignment BPARA(Optio preferentially assigned to the GBFD-
when the BSC6900 waits for a
EN Optimization BSC6900 nal) overlay subcell. 114402
handover success message after a
handover command is sent in an GBFD-
SET outgoing BSC handover. If the 110601
OUTBSCHOC GCELLTMR(O timer expires, the outgoing BSC GBFD-
LEARTIMER T8 BSC6900 ptional) handover fails. 510501
The timer is used to set the time
when the BSC6900 waits for an
HO REQ ACK message after a
Handover Request message is GBFD-
SET reported in an outgoing BSC 110601
OUTBSCHOC GCELLTMR(O handover. If the timer expires, the GBFD-
MDTIMER T7 BSC6900 ptional) outgoing BSC handover fails. 510501
When the load of the underlay
GBFD-
subcell is higher than this
Inter BSC Load SET Whether to use external 2G 110601
parameter, some of the calls in the
OutBscLoadH Information GCELLHOAD neighboring cells as the target GBFD-
underlay subcell will be switched to
oEn Allowed BSC6900 (Optional) cells of load handovers 510501
the overlay subcell, and channels
Power overload threshold for
UL Subcell SET in the overlay subcell will be
triggering outgoing handover from
General GCELLHOED preferentially assigned to calls
the TRX under the prerequisite
OUTGENOVE Overload BPARA(Optio initiated in the underlay subcell as GBFD-
that the power amplifier of the TRX
RLDTHRED Threshold BSC6900 nal) well. 114402
provides the maximum output
power. If the power overload
OUTHOPWR Power Overload SET exceeds this threshold, the TRX
OVERLOADT Threshold In Ho. GTRXDEV(O triggers outgoing handover for lack GBFD-
Lower threshold of the overlay
HRESHOLD Out BSC6900 ptional) of power. 111005
level
Whenduring
the load overlay-to-underlay
of the underlay
SET handovers.
subcell exceeds When"UL theSubcell
receive level
Outgoing OL GCELLHOED of an MS is higher than
General Overload Threshold", this all
OUTINNREX Subcell HO Level BPARA(Optio threshold,
the calls that are using thisswitched
the MS can be cell as GBFD-
LEVTHRED TH BSC6900 nal) to
the the underlay
serving cell subcell.
generate handover 114402
Whether to switch some of the
SET requests
calls in theat underlay
the samesubcell
time, which
to the
GCELLHOED will suddenly
overlay when increase
the load the load of
of the
If the underlay load is higher than
OUTLOADHO Load HO BPARA(Optio the BSC and
underlay possibly
is higher thancause
this GBFD-
"UL Subcell Serious Overload
ENABLE Allowed BSC6900 nal) congestion
parameter in the overlay subcell, 114402
Threshold", the underlay-to-overlay
thus causing the handovers to fail.
SET handover period subtracts a value
To solve this problem, the BSC
MOD Step LEN GCELLHOED that equals this threshold from "UL
uses the hierarchical load
OUTLOADHO of UL Load HO BPARA(Optio Subcell Load Hierarchical HO GBFD-
handover algorithm to gradually
MODPERI Period BSC6900 nal) Periods" every second. 114402
switch some of the calls in the
SET underlay subcell to the overlay
UL Subcell Load GCELLHOED subcell. This parameter indicates
OUTLOADHO Hierarchical HO BPARA(Optio the duration of each handover GBFD-
PERIOD Periods BSC6900 nal) level. 114402
When the load of the underlay
SET
subcell is lower than this
Step Length of GCELLHOED Level step during underlay-to-
parameter, some of the calls in the
OUTLOADHO UL Subcell Load BPARA(Optio overlay hierarchical load GBFD-
overlay subcell will be switched to
STEP HO BSC6900 nal) handovers 114402
the underlay subcell, and channels
SET in the underlay subcell will be
GCELLHOED preferentially assigned to channel
OUTLOWLOA UL Subcell Lower BPARA(Optio requests initiated in the overlay GBFD-
DTHRED Load Threshold BSC6900 nal) subcell as well. 114402
ADD
SEMILINK(Op Specifies the timeslot mask out GBFD-
OUTMASK Out BSC Mask BSC6900 tional) BSC6900 114701
ADD
Out BSC Port SEMILINK(Ma GBFD-
OUTPN No. BSC6900 ndatory) Outgoing BSC6900 port number 114701
ADD
DXXTSEXGR
DXX Out Port ELATION(Man Number of the outgoing port of the GBFD-
OUTPORTNO No. BSC6900 datory) DXX 111203
ADD
DXXTSEXGR
DXX Out Time ELATION(Man Number of the outgoing timeslot of GBFD-
OUTPORTTS Slot No. BSC6900 datory) the DXX 111203
Level of the accessed alarm
signal. If the alarm signal has high
Cannel 0 Digital SET level, this parameter should be set
Control Signal BTSDTMUBP to 0. Otherwise, it should be set to GBFD-
OUTPUT0 Level BSC6900 (Optional) 1. 111202
Level of the accessed alarm
signal. If the alarm signal has high
Cannel 1 Digital SET level, this parameter should be set
Control Signal BTSDTMUBP to 0. Otherwise, it should be set to GBFD-
OUTPUT1 Level BSC6900 (Optional) 1. 111202
Level of the accessed alarm
Output
signal. Ifpower of thesignal
the alarm location
has high
Cannel 2 Digital SET group. Forparameter
level, this a location should
group that
be set
Control Signal BTSDTMUBP consists of MRRU
to 0. Otherwise, or GRRU
it should be set to GBFD-
OUTPUT2 Level BSC6900 (Optional) boards,
1. the default output power is 111202
Level of the accessed alarm
15W. For a location group that
signal. If the alarm signal has high
consists of DRRU boards, the
Cannel 3 Digital SET level, this parameter should be set
default output power varies with
Control Signal BTSDTMUBP to 0. Otherwise, it should be set to GBFD-
frequency bands. That is, when the
OUTPUT3 Level BSC6900 (Optional) 1. 111202
frequency band is 850M/900M, the
default output power is 18W; when
ADD the frequency band is
OUTPUTPO BTSLOCGRP 1800M/1900M, the default output GBFD-
WER Output Power BSC6900 (Mandatory) power is 15W. 510104
ADD
OUTPUTPO BTSLOCGRP GBFD-
WER1 Output Power BSC6900 (Mandatory) When the
Output loadofofthe
power thelocation
underlaygroup 510104
subcell is higher than this
parameter, the underlay-to-overlay
ADD
load handover period subtracts a
OUTPUTPO Output Power BTSLOCGRP Output power unit of the location GBFD-
period that equals "Step Length of
WERUNIT Unit BSC6900 (Optional) group 510104
UL Subcell Load HO" from "UL
SET Subcell Load Hierarchical HO
UL Subcell GCELLHOED Periods" every second, thus
OUTSERIOV Serious Overload BPARA(Optio increasing the load handover GBFD-
ERLDTHRED Threshold BSC6900 nal) speed. 114402
ADD
SEMILINK(Ma GBFD-
OUTSN Out BSC Slot No. BSC6900 ndatory) Outgoing BSC6900 slot number 114701
ADD
ABISLOADSH
Load Outlet Slot ARE(Mandato Slot number of the load outlet GBFD-
OUTSN No. BSC6900 ry) interface board 111203
ADD
Out BSC SEMILINK(Ma Outgoing BSC6900 subrack GBFD-
OUTSRN Subrack No. BSC6900 ndatory) number 114701
SET This parameter specifies whether
When the Service Handover field
Allow Inter-RAT GCELLHOINT to allow the inter-RAT load
in an ASS REQ message is 0, a
OutSysLoadH Load HO in ERRATLDB(O handover in connection mode MRFD-
direct retry process targeted at a
oEn Connect State BSC6900 ptional) (after the assignment is complete). 211402
3G network is initiated. If the direct
retry fails, the system decides
OUTSYSSER Service SET whether to re-assign channels for
When this parameter is set to
VHOREASSI Handover OTHSOFTPA the current call based on this GBFD-
Open, the BSS decides whether to
GNEN Reassign BSC6900 RA(Optional) parameter. 114321
hand over the current service to
the 3G network according to the
SET contents of the "Service Handover"
OUTSYSSER Service Based OTHSOFTPA information element in the ASS GBFD-
VICEHOEN Handover Switch BSC6900 RA(Optional) REQ and HO REQ messages. 114321
SET
Derating TEMP BTSCABPAR Temperature threshold of the GBFD-
OVERTHD Threshold BSC6900 A(Optional) derating function of the cabinet 111202
Threshold for critical flow control.
When the usage of the CPU
CPU Usage for SET This parameter
exceeds specifies
the threshold, thewhether
CPUS
Critical Paging BSCFCPARA( performs critical flow controlunit
the multi-carrier transceiver for GBFD-
P11 FC BSC6900 Optional) supports the Multi-Carrier
paging messages. 111705
Threshold for majorRegulation
Intelligent Voltage flow control.
When
feature. the usage of the CPU
SET exceeds
When thisthe threshold,
parameter is the
set CPUS
to YES,
CPU Usage for BSCFCPARA( performs
the multi-carrier transceiver for
major flow control unit GBFD-
P12 Major Paging FC BSC6900 Optional) paging messages.
automatically 111705
Threshold for regulates
minor flowits working
control.
voltage
When the according
usage oftothe theCPUpower
SET requirements of a service.
exceeds the threshold, the When
CPUS
CPU Usage for BSCFCPARA( this parameter
performs minorisflow set control
to NO, forthe GBFD-
P13 Minor Paging FC BSC6900 Optional) multi-carrier
paging transceiver unit works
messages. 111705
Whether
Thresholdtofor support the function
slight flow control. of
at a fixed working voltage.This
moving
When the theusage
packet ofassignment
the CPU
parameter applies only to
SET down
exceeds to the
the BTS. To improve
threshold, the CPUS the
BTS3036, BTS3036A, DBS3036,
CPU Usage for BSCFCPARA( access
performs speed
slightofflow
thecontrol
MS, afterfor the GBFD-
BTS3900 GSM, BTS3900L GSM,
P14 Slight Paging FC BSC6900 Optional) packet
paging assignment
messages. is moved down 111705
BTS3900A GSM, DBS3900 GSM,
to the BTS, the BSC reserves the
BTS3900E base stations. For
uplink resources for the BTS. The
SET other base stations, this parameter
BTS obtains the channel request
PA Intelligent BTSOTHPAR is not displayed and cannot be GBFD-
of the MB by analyzing the
PaAdjVol Adjust Voltage BSC6900 A(Optional) configured (the fixed value is Null). 111612
downlink acknowledgement
SET message sent by the MS. Then the
Move Packet GCELLPSOT BTS allocates the reserved uplink
PACKASSDL Assignment HERPARA(Op resources to the MS to move the GBFD-
SHIFT Down to BTS BSC6900 tional) packet assignment to the BTS. 119202
Average Paging
PAGINGAVG Message SET Average number of paging
CAPACITYIN Number In GCELLSOFT( messages allowed in a cell in a GBFD-
PERIOD Period BSC6900 Optional) period 111705
the queue of the BTS. The setting
of this parameter must be
consistent with the setting of timer
T3113 in the core network;
otherwise, the efficiency of paging
scheduling over the Um interface
is reduced. It is recommended that
this parameter be set to a value
SET For
one the BTS,
to two this parameter
seconds is
shorter than
PAGINGLIFE BTS Paging GCELLSOFT( used
timer to determine
T3113. paging
The units of this GBFD-
TIME Lifetime BSC6900 Optional) retransmissions.
parameter is 250ms. This parameter 110303
and the number of paging times
MAX Paging
configured in the MSC determine
PAGINGMAX Message SET Maximum number of paging
the number of paging
CAPACITYIN Number In GCELLSOFT( messages allowed in a cell in a GBFD-
retransmissions. The total number
PERIOD Period BSC6900 Optional) period 111705
of paging times is approximately
This parameter sets the PAN_DEC
This
equalparameter
to the valuesets
of the
thisPAN_INC
value used by the counter N3102
SET value usedmultiplied
parameter by the counter
by theN3102
of the MS. When the timer T3182
GCELLCCBA of the MS.
number When receiving
of paging the
times configured GBFD-
of the MS expires, the N3102
PAGTIMES Paging Times BSC6900 SIC(Optional) packet uplink acknowledged or
in the MSC. 110303
reduces the value of PAN_DEC. 0:
unacknowledged message sent by
the value of PAN_DEC is 0; 7: the
the network (V(S) or V(A)
SET value of PAN_DEC is 7; Value N
increases), the MS increases the
GCELLPSBA indicates that PAN_DEC is N; Not GBFD-
count (PAN_INC) of the counter
PANDEC PAN_DEC BSC6900 SE(Optional) use: this parameter is not used. 114101
N3102. 0: the value of PAN_INC is
0; 7: the value of PAN_INC is 7;
SET Value N indicates that PAN_DEC is
GCELLPSBA N; Not use: this parameter is not GBFD-
RAN_MAX value, the maximum
PANINC PAN_INC BSC6900 SE(Optional) used. 114101
value of the N3102. 4: the value of
PAN_MAX is 4; 32: the value of
Priority level at which the BSC
SET PAN_MAX is 32. Value N indicates
shuts down the power amplifier of
GCELLPSBA that PAN_DEC is N; Not use: this GBFD-
the TRX when the intelligent
PANMAX PAN_MAX BSC6900 SE(Optional) parameter is not used. 114101
shutdown function is enabled. If
this parameter is set smaller, the
SET priority level is higher, the power
PAOPTILEVE Priority of Shut GTRXDEV(O amplifier of the TRX is shut down GBFD-
L Down TRX BSC6900 ptional) earlier. 111602
SET
BTSAUTODL
DACTINFO(M Patch number of the TMU board GBFD-
PatchNo Patch No. BSC6900 andatory) software 111202
SET
BTSAUTODL
DACTINFO(M Patch number of the TMU board GBFD-
PatchNo1 Patch Number BSC6900 andatory) software 111202
ADD
IP path check IPPATH(Optio GBFD-
PATHCHK flag BSC6900 nal) IP path check flag 118605
ADD
IPPATH(Mand GBFD-
ADD
PATHID IP path ID BSC6900 atory) Uniquely identifies an IP path 118605
IPMUX(Mand
atory)
ADD
IPPATHBIND(
PATHID IP path ID BSC6900 Mandatory) IP path ID,Identifying an IP path. None
SET
Path Loss of GCELLPWRB Transmission loss difference
Different ASIC(Optional between radio frequencies on GBFD-
PATHLOSS Frequency Band BSC6900 ) different bands 117602
ADD
IPPATH(Optio GBFD-
CON
PATHT IP path type BSC6900 nal) Type of the IP path 118605
PATCH(Optio
nal) Whether to use the PBGT
LOD handover algorithm. PBGT
PATCH(Optio handovers are based on path loss. MRFD-
PATTYPE Patch type BSC6900 nal) The
PatchPBGT
type handover algorithm 210301
searches in real time for cells that
SET
have lower path loss and meet
GCELLPSPW
certain system requirements, and
PARA(Option BTS power attenuation on the GBFD-
decides whether to perform the
PB Pb BSC6900 al) measured PBCCH 119115
handovers. To avoid ping-pong
handovers, PBGT handovers can
The triggering of PBGT handovers
SET occur only on TCHs and among
must meet the P/N criteria, that is,
PBGT HO GCELLHOBA cells on a same layer and a same GBFD-
when the condition for PBGT
PBGTHOEN Allowed BSC6900 SIC(Optional) PBGT
priorityhandovers
level. to a neighboring 110601
handovers is met for a consecutive
cell are allowed only when the
P seconds during N seconds, a
downlink level difference between
ADD PBGT handover is triggered. This
the neighboring cell and the
G2GNCELL(O parameter corresponds to the P in GBFD-
serving cell is larger than this
PBGTLAST PBGT Valid Time BSC6900 ptional) the P/N criteria. 110601
parameter. When the value of this
parameter is smaller than 64,
The triggering of PBGT handovers
ADD handovers to a neighboring cell
must meet the P/N criteria, that is,
PBGTMARGI PBGT HO G2GNCELL(O with a lower level than the current GBFD-
when the condition for PBGT
N Threshold BSC6900 ptional) serving cell are allowed. 110601
handovers is met for a consecutive
Maximum times for an external
P seconds during N seconds, a
PCU to retransmit a PB interface
ADD PBGT handover is triggered. This
maintenance message. When the
PBGT Watch G2GNCELL(O parameter corresponds to the N in GBFD-
PCU fails to receive a response to
PBGTSTAT Time BSC6900 ptional) the P/N criteria. 110601
a PB interface maintenance
message before the timer
MAX Retrans SET timeouts, it retransmits the PB
PbMtnMsgRe Maintenance OTHSOFTPA interface maintenance message to GBFD-
Send Msg on Pb-I BSC6900 RA(Optional) the BSC. 114101
SET
GCELLPWRB Minimum interval between two
PCADJPERIO ASIC(Optional consecutive power control GBFD-
D PC Interval BSC6900 ) commands 110703
Channel used for the measured
SET receiving power. It is used to set
GCELLPSPW the measured receiving power
PCMEASCHA PC_MEAS_CHA PARA(Option level of the channel and control the GBFD-
N N BSC6900 al) power of the uplink. 119115
It is one key filed of identifying Pb
BLK interface CIC status and indicates
PBCIC(Manda the PCU No. corresponding to the GBFD-
PCU PCU No BSC6900 tory) Pb interface CIC. 111203
ADD
PCU(Mandato PCU number, identifying a unique GBFD-
PCUINDEX PCU No. BSC6900 ry) PCU. 114101
ADD
PDTMRVALU M3LKS(Optio GBFD-
E PENDING timer BSC6900 nal) Pending timer of the M3UA link set 118602
SET
GBSCREDGR GBFD-
PeerBSCID Peer BSC ID BSC6900 P(Mandatory) Peer BSC identity 113725
SET
BTSIP(Manda GBFD-
PEERBSCID Peer BSC ID BSC6900 tory) ID of the peer BSC6900 118601
SET
BTSIP(Manda IP address of the peer BSC6900 GBFD-
PEERBSCIP Peer BSC IP BSC6900 tory) on the homing BSC6900 side 118601
SET
PEERBSCMA BTSIP(Manda Subnet mask of the port IP GBFD-
SK Peer BSC Mask BSC6900 tory) address at the peer BSC6900. 118601
SET
BTSIP(Manda Identifier of the peer BTS on the GBFD-
PEERBTSID Peer BTS ID BSC6900 tory) homing BSC6900 side 118601
GBFD-
ADD Peer IP address of the PPP link. 118611
PPPLNK(Man The IP address of the PPP link on GBFD-
PEERIP Peer IP address BSC6900 datory) the peer side of the BSC. 118622
GBFD-
ADD 118611
MPGRP(Man GBFD-
PEERIP Peer IP address BSC6900 datory) Peer IP address of the MP group. 118622
STR
IPCHK(Manda Detects the IP address of the GBFD-
PEERIP Peer IP address BSC6900 tory) gateway 118609
ADD
BTSPPPLNK( IP address of the peer end of BTS GBFD-
PEERIP Peer IP Address BSC6900 Mandatory) PPP Link. 118611
ADD
BTSMPGRP( IP address of the peer end of BTS GBFD-
PEERIP Peer IP Address BSC6900 Mandatory) MLPPP Group. 118611
ADD
First destination SCTPLNK(Ma First destination IP address. The GBFD-
PEERIP1 IP address BSC6900 ndatory) invalid value is 0. 118602
Second ADD
destination IP SCTPLNK(Op Second destination IP address. GBFD-
PEERIP2 address BSC6900 tional) The invalid value is 0. 118602
ADD
PEERIPADD IPPATH(Mand The peer IP address should not be GBFD-
R Peer IP address BSC6900 atory) the same as the local address. 118605
ADD
Peer subnet IPPATH(Optio GBFD-
PEERMASK mask BSC6900 nal) Subnet mask of the peer IP 118605
Whether to punish the target cell
when a handover fails or to punish
the current serving cell when a
handover is of more TA or bad
ADD quality.
Destination SCTPLNK(Ma After a handover fails due to GBFD-
PEERPN SCTP port No. BSC6900 ndatory) congestion
Destination of the target
SCTP cell, the
port number 118602
system needs to punish the target
SET
cell to prevent the MS from
BTSLOADCT
attempting to switch to the target
PEERVERSI RL(Mandatory GBFD-
cell again.
ON Peer Version BSC6900 ) Penalty duration
Peer Software for cell
Version 111202
Ping-pong handovers can easily
reselection. Cell penalty can be
occur when handovers are of more GBFD-
performed only in this duration.
SET TA or bad quality. In these cases, 110601
When this parameter is set to a
GCELLHOCT When the cell
the system reselection
needs to punishfailure
the GBFD-
greater value, the MS cannot
PENALTYEN Penalty Allowed BSC6900 RL(Optional) message is received
current serving cells. or the load 510501
reselect a cell in longer time in the
cell reselection is initiated, the
case of reselection failure or
"Cell Penalty Level" is subtracted
SET reselection due to load. The
from the receive level of the target
PENALTYLAS Cell Penalty GCELLNC2P penalty timer is shorter when this GBFD-
cell to avoid that cell reselection
TTM Duration BSC6900 ARA(Optional) parameter is set to a smaller value. 116201
failure occurs repeatedly or that
multiple MSs are reselected to the
SET same target cell. This parameter is
PENALTYRX Cell Penalty GCELLNC2P valid only within "Cell Penalty GBFD-
LEV Level BSC6900 ARA(Optional) Duration". 116201
GBFD-
SET Timer of penalty on a neighboring 110601
PENALTYTIM GCELLHOFIT cell when a handover fails due to GBFD-
ER CfgPenaltyTimer BSC6900 PEN(Optional) faults of data configration. 510501
ADD
Ping Check IPPATH(Optio GBFD-
PERIOD Period BSC6900 nal) Ping check period of IP Path 118605
STR
Measurement NCS(Mandato Measurement period for each GBFD-
PERIOD Period BSC6900 ry) frequency group 510901
GBFD-
ADD 118611
Protocal field PPPLNK(Opti Compression flag of the PPP link GBFD-
PFC compress BSC6900 onal) protocol domain 118622
GBFD-
ADD 118611
Protocol field MPGRP(Optio Compression flag of the PPP link GBFD-
ADD
PFC compress BSC6900 nal) protocol domain 118622
BTSPPPLNK(
Optional)
ADD
Support Protocol BTSMPGRP( Whether to compress the protocol GBFD-
PFC Field Compress BSC6900 Optional) field of the PPP link. 118611
Whether to support packet flow
context (PFC). The PFC flow is
ADD used to control the QoS of the GBFD-
PFCSUP PFC Support BSC6900 NSE(Optional) packet service of the MS. 119901
Whether to support the paging
message classification function:
0,close;
Paging Message SET 1,paging message classification
PGCLASSIFI Classifying BSCFCPARA( flow control; GBFD-
NGALLOWED Allowed BSC6900 Optional) 2,re-paging flow control. 111705
Maximum number of paging
PGMAXMSG Max Paging SET messages that the BSC6900 can
NUMINPERIO Message Num in BSCFCPARA( process over the A interface within GBFD-
D Period BSC6900 Optional) a measurement period 111705
SET
Per-Hop PHBMAP(Ma Value of the per-hop behavior GBFD-
PHB Behavior BSC6900 ndatory) (PHB) 118605
GBFD-
Cell Reselect Parameters
ADD 118604
Indication (PI), sent on the
IPMUX(Mand PHB type of the IPMUX to be GBFD-
broadcast channel, indicates
PHB PHB BSC6900 atory) enabled 118610
whether "Cell Reselect Offset",
SET "Cell Reselect Temporary Offset" in
Cell Reselect GCELLIDLEB the "SET GCELLIDLEAD"
Parameters ASIC(Optional command, and "Cell Reselect GBFD-
Whether to enable the private key
PI Indication BSC6900 ) Penalty Time" are used. 110402
password
DISABLE: indicating that the
Private Key SET private key password is disabled
PKPEnableSt Password CERTFILE(Op ENABLE: indicating that the MRFD-
a Enabled State BSC6900 tional) private key password is enabled 210305
STR
ETHOAMLOO Indicates the number of the
PTST(Optiona packets for remote loopback test of GBFD-
PKTCOUNT PKT Count BSC6900 l) the OAM in the Ethernet 118630
STR
ETHOAMLOO Maximum multiplexing
Indicates the frame
length of the packets
PTST(Optiona length. The length
for the remote of thetest of the
loopback GBFD-
PKTLEN PKT Size[Byte] BSC6900 l) multiplexed packet must not
OAM in the Ethernet 118630
exceed the maximum multiplexing
frame length. If the length of the
STR
multiplexed packet exceeds the
FRPORTLOO
maximum multiplexing frame
PKTLEN Packet Length BSC6900 P(Mandatory) Whether
Loopbackthe cell supports
packet length the None
length, the packet is transferred
PACKET SI STATUS flow. In the
ADD without being added with new
PACKET SI STATUS flow, the MS
BTSABISMUX subframes. The frame length
sends the Packet PSI/SI Status
PKTLENTHR Maximum Frame FLOW(Option refers to the payload, excluding the GBFD-
message to indicate that the MS
ES Length BSC6900 al) IP/UDP header. 118604
has stored the system message.
The network side sends the Packet
SET Serving Cell Data message to
GCELLGPRS( notify the MS of the system GBFD-
PKTSI PACKET SI BSC6900 Optional) message not stored. 119801
Indicates the size of the PING
PING Persistence
packet, neitherlevelIP 1header
of the nor
radio
PING
PKTSIZE Size of packet BSC6900 IP(Optional) access priority.is included.
ICMP header None
MAC(Optional
During MS access, the access
)
priority of the MS is set. If the
PING
priority of the MS is higher than the
BTSCFM(Opti GBFD-
access priority of the MS, the cell
PKTSIZE PKT Size BSC6900 onal) Sent packet size 118630
allows the access of the MS.
Power attenuation level of all the
Otherwise, the cell rejects the
other timeslots of the BCCH
SET access of the MS. The value "no
except for timeslot 7 in 16QAM.
Persistence GCELLPRAC Persistence
use" indicates level
this2parameter
of the radiois not GBFD-
The attenuation level ranges from
PL1 Level 1 BSC6900 H(Optional) access
used. priority. 119110
0 to 50, with the step of 0.2 dB.
During MS access, the access
16QAM When the EDGE TRX sends
priority of the MS is set. If the
Transmitter SET signals in 16QAM, the transmit
priority of the MS is higher than the
Power Reduce GTRXDEV(O Persistence
power must be level 3 ofthan
lower the radio
the GBFD-
access priority of the MS, the cell
PL16QAM Level BSC6900 ptional) access priority.
mean power in GMSK. 114201
allows the access of the MS.
During MS access, the access
Otherwise, the cell rejects the
priority of the MS is set. If the
SET access of the MS. The value "no
priority of the MS is higher than the
Persistence GCELLPRAC use" indicates this parameter is not GBFD-
access priority of the MS, the cell
PL2 Level 2 BSC6900 H(Optional) used. 119110
allows the access of the MS.
Power attenuation level of all the
Otherwise, the cell rejects the
other timeslots of the BCCH
SET access of the MS. The value "no
except for timeslot 7 in 32QAM.
Persistence GCELLPRAC Persistence
use" indicates level
this4parameter
of the radiois not GBFD-
The attenuation level ranges from
PL3 Level 3 BSC6900 H(Optional) access
used. priority. 119110
0 to 50, with the step of 0.2 dB.
During MS access, the access
32QAM When the EDGE TRX sends
priority of the MS is set. If the
Transmitter SET signals in 32QAM, the transmit
priority of the MS is higher than the
Power Reduce GTRXDEV(O power must be lower than the GBFD-
access priority of the MS, the cell
PL32QAM Level BSC6900 ptional) Power attenuation
mean power in GMSK. level of the 114201
allows the access of the MS.
EDGE TRX. There are 50 power
Otherwise, the cell rejects the
attenuation levels. At each level,
SET access of the MS. The value "no
the power is attenuated by 0.2 dB.
Persistence GCELLPRAC use" indicates this parameter is not GBFD-
The spectrum requirements are
PL4 Level 4 BSC6900 H(Optional) used. 119110
met only when the power of an
Statistics period of the packet drop
EDGE transceiver for transmitting
ratio. This parameter indicates the
SET 8PSK signals is lower than the
period for collecting the statistics
GTRXDEV(O average power for GMSK GBFD-
information about the packet drop
PL8PSK TRX 8PSK Level BSC6900 ptional) modulation. 114201
ratio. Note that the unit of this
parameter is 100 milliseconds. The
Packet lost ADD actual delay statistics period is the
Packet drop ratio threshold for
measure period IPLOGICPOR value of this parameter multiplied GBFD-
speed reduction. When the packet
PLPRD [100ms] BSC6900 T(Optional) by 100 milliseconds. 118605
drop ratio exceeds the value of this
parameter, the rate of the logical
ADD port is reduced. Note that the unit
Packet discard IPLOGICPOR of this parameter is a thousand to GBFD-
PLTH threshold[0.001] BSC6900 T(Optional) one. 118605
SET
TCPLYVOICE GBFD-
PLYPOINT Play Point BSC6900 (Mandatory) Point at which to play sound 111203
SET
TCPLYVOICE GBFD-
Duration of sound playing. If this
PLYSWITCH Play Switch BSC6900 (Mandatory) Whether to enable sound playing 111203
parameter is set to 0, the sound is
played repeatedly. If this
SET parameter exceeds the duration of
TCPLYVOICE the record file, the void sound is GBFD-
CPU usage threshold for
PLYTIME Play Time BSC6900 (Optional) played for the exceeding part. 111203
performance monitoring. When the
average CPU usage of sliding
Performance SET windows reaches or exceeds the
Packet queue usage threshold for
monitor control FCCPUTHD( threshold, performance monitoring WRFD-
performance monitoring. When the
PMCTHD threshold BSC6900 Optional) is triggered. 040100
average packet queue usage of
sliding windows reaches or
Performance SET exceeds the threshold,
monitor control FCMSGQTHD performance monitoring is WRFD-
PMCTHD threshold BSC6900 (Optional) triggered. 040100
Interval for sending cell paging
Interval for SET group packets when Paging
Sending Cell GCELLSOFT( Messages Optimize at Abis GBFD-
PMI Paging Package BSC6900 Mandatory) Interface is enabled 110303
Number of cell paging group
Number of Cell SET packets when Paging Messages
Pagings in One GCELLSOFT( Optimize at Abis Interface is GBFD-
PMNUM Package BSC6900 Mandatory) enabled 110303
Performance SET
monitoring flow FCSW(Option Whether to monitor the RRM WRFD-
PMSW control switch BSC6900 al) performance 040100
SET
SCUPORT(O MRFD-
PN Port No. BSC6900 ptional) Number of the port 210301
SET
ALMPORT(M MRFD-
PN Port No. BSC6900 andatory) Port No. of environment alarm 210304
Port No. of the XPU board. If you
SET do not specify this parameter, all
XPUPORT(Op ports of the XPU board are MRFD-
Number of the E1/T1 port on the
PN Port No. BSC6900 tional) queried. 210301
Ater interface board. E1 mode:
0~31 (EIU), 0~62(OIU),
ADD 0~251(POUc). T1 mode:
ATERE1T1(M 0~31(EIU), 0~83(OIU), GBFD-
ADD
PN Port No BSC6900 andatory) 0~335(POUc). 111801
AE1T1(Manda
tory)
BLK
AE1T1(Manda GBFD-
PN Port No BSC6900 tory) Port number 111803
It is one key field of identifying the
BLK block of the Ater timeslot and
ATERE1T1(M indicates the port No. of the Ater
PN BM Port No BSC6900 andatory) interface timeslot. None
ADD
PBE1T1(Man Port number of the E1/T1 of the Pb GBFD-
Number of the port where the
PN Port No. BSC6900 datory) interface 111203
alarm is generated, only the ports
for data transmission are
ADD supported, such as E1/T1 port,
OBJALMSHL channelized optical port tributary, MRFD-
SET
PN Port No. BSC6900 D(Mandatory) optical port, and Ethernet port 210304
MSPCMD(Ma
ndatory)
SET
MSP(Mandato Indicates the port number for
PN Port No. BSC6900 ry) running this command. None
SET
E1T1LOP(Opt
LOP
PN Port No. BSC6900 ional) E1/T1 port number None
E1T1(Optional
)
SET
E1T1(Optional
PN Port No. BSC6900 ) E1/T1 port number None
STR
E1T1TST(Opti
PN Port No. BSC6900 onal) E1/T1 port number None
SET
OPTLOP(Man Indicates the port number for
PN Port No. BSC6900 datory) running this command. None
SWP
ETHPORT(Ma GBFD-
PN Port No. BSC6900 ndatory) Port number 111701
SET
ETHPORT(Op
SET
PN Port No. BSC6900 tional)
OPT(Optional) Port number None
ADD
ETHREDPOR
SET
T(Mandatory)
COPTLNK(Op
ADD
PN Port No. BSC6900 tional) Port number None
ETHIP(Manda
tory)
ADD
ETHMEP(Man
PN Port No. BSC6900 datory) Ethernet port None
ADD
STR
IPLOGICPOR
IPCHK(Option
PN Physics port No. BSC6900 T(Optional) FE/GE port number None
al)
STR
ETHOAMLOO
PTST(Mandat GBFD-
PN Port No. BSC6900 ory) Ethernet port 118609
STR
FRPORTLOO
PN Port No. BSC6900 P(Optional) Port number None
CHK
E1T1CRS(Ma
PN Port No. BSC6900 ndatory) E1/T1 port number None
ADD
BC(Mandatory GBFD-
PN Port No. BSC6900 ) Port number 510002
ADD
PBSL(Mandat GBFD-
PN Port No. BSC6900 ory) Port number of Pb signaling link 111203
ADD
SET
BTSAUTOPL
BTSENVALM
AN(Mandatory Port No. of the BSC6900 board GBFD-
PORT(Mandat
PN Port No. BSC6900 ) connected with the BTS 111202
ory)
SET
ADD
BTSFORBIDT
BTSOBJALM
S(Mandatory)
SHLD(Mandat MRFD-
ADD
PN Port No. BSC6900 ory) Alarm port number 210304
BTSPPPLNK(
Mandatory)
ADD
BTSMPLNK( Number of the port on the BTS GBFD-
PN Port No. BSC6900 Mandatory) side 111202
SET
BTSOMLTS(M Number of the port on the BTS GBFD-
PN Port No. BSC6900 andatory) side 111202
ADD
DXXCONNEC GBFD-
PORTNO DXX In Port No. BSC6900 T(Mandatory) Number of the DXX port 111203
ADD
POWER_REL Switch for Relay EMU(Optional MRFD-
AY2 2 BSC6900 ) Relay switch 2 210301
ADD
POWER_REL Switch for Relay EMU(Optional MRFD-
AY3 3 BSC6900 ) Relay switch 3 210301
ADD
POWER_REL Switch for Relay EMU(Optional MRFD-
AY4 4 BSC6900 ) Relay switch 4 210301
ADD
POWER_REL Switch for Relay EMU(Optional MRFD-
AY5 5 BSC6900 ) Relay switch 5 210301
ADD
POWER_REL Switch for Relay EMU(Optional MRFD-
AY6 6 BSC6900 ) Relay switch 6 210301
ADD
IPLOGICPOR
ADD
PPPLNKN PPP link No. BSC6900 T(Optional) PPP link number None
BTSPPPLNK(
Mandatory)
ADD
Whether to enable the PPP frame
BTSMPLNK( This parameter specifies whether GBFD-
ADD multiplexing function. If this
PPPLNKN PPP Link No. BSC6900 Mandatory) Number
the of a BTS
preempted PPPreleased
link. 118611
PPPLNK(Opti parameter is setcall
to is
ENABLE, the
onal) after the handover
PPP frame failure.
multiplexing If this is
function GBFD-
ADD parameter
enabled. If is setparameter
this to No, MSs withto
is set 118611
MPGRP(Optio high priorities
DISABLE, the can
PPPaccess
frame the GBFD-
PPPMUX PPP mux BSC6900 nal) network preferentially,
multiplexing function isbut the
disabled. 118622
preempted call drops; if this
ADD This parameter applies to the
parameter is set to Yes, the
PORTFLOWC FG2a and GOUa boards. For the
preempted call is not released. In
Priority queue TRLPARA(Opt FG2c, GOUc, or POUc board, this
this case, the access requests
PQNUM number BSC6900 ional) parameter is always set to 2. None
from MSs with high priorities
Preempted Call initiate the queuing procedure or
This parameter specifies whether
Not Released SET the calls fail. Therefore, the access
to preempt PDCHs when no TCH
PREEMFORH After Handover OTHSOFTPA rate of MS with high priorities is GBFD-
is available during the handover of
ONOTREL Failure BSC6900 RA(Optional) decreased. 115001
PDCH the preempted call. When this
Preemption parameter is set to Yes, the call
Allowed During SET drop rate of the preempted call is
PREEMFORH Handover Due to OTHSOFTPA decreased, but the rate of PS GBFD-
OPDCH Preemption BSC6900 RA(Optional) services is affected. 115001
If this parameter is set to ON, the
BSC initiates a TCHF preemption
Emergency Call SET when receiving a link
PREEMPTIO Preemption GCELLCCAD( establishment indication from an GBFD-
NPERMIT Permitted BSC6900 Optional) MS in an emergency call. 110202
Access priority of the MS that is
allowed to access the cell. The MS
SET sends the packet channel request
PREMRSAM Preprocess MR GMRCTRL(O containing
Sampling ratethe of
2-bit radio priority
pre-processed GBFD-
Priority of a route. A smaller value
PLE Sample Ratio BSC6900 ptional) message.
measurement The reports.
priority of the 2-bit 110802
of this parameter indicates a
radio priority message ranges from
higher priority. The BTS
1 to 4 in descending order. During
ADD preferentially selects the route with
the MS access, the BSC compares
BTSIPRT(Opti a high priority to transfer GBFD-
the radio priority in the channel
PRI Route Priority BSC6900 onal) information. 118601
request with the parameter setting
of the cell. If the radio priority
SET equals to the parameter setting of
Packet Access GCELLPSBA the cell, the BSC sets up the TBF GBFD-
This parameter specifies whether
PRIACCTHR Priority BSC6900 SE(Optional) for the channel request. 114101
to support flow control based on
priority. When this parameter is set
Support Priority SET to on, the system preferentially
Whether the BTSs send the
Based Flow BSCFCPARA( admits the calls initiated by VIP GBFD-
original measurement reports to
PRIFCEN Control BSC6900 Optional) users. 111705
the BSC after pre-processing
them. When this parameter is set
SET to YES, the BTSs sends the
PRIMMESPP Transfer Original GCELLHOCT original and pre-processed GBFD-
T MR BSC6900 RL(Optional) measurement reports to the BSC. 110802
Printing control threshold. If the
CPU usage of sliding windows
SET reaches or exceeds the threshold,
Print control FCCPUTHD( printing flow control is triggered on WRFD-
PRINTCTHD threshold BSC6900 Optional) the serial port. 040100
Printing control threshold. When
the packet queue usage of sliding
SET windows reaches or exceeds the
Print control FCMSGQTHD threshold, printing flow control is WRFD-
PRINTCTHD threshold BSC6900 (Optional) triggered on the serial port. 040100
Printing control threshold. If the
CPU usage of sliding windows is
SET lower than the threshold, printing
Print restore FCCPUTHD( flow control on the serial port is WRFD-
PRINTRTHD threshold BSC6900 Optional) stopped. 040100
Printing control threshold. When
the packet queue usage of sliding
SET windows is lower than the
Print restore FCMSGQTHD threshold, printing flow control on WRFD-
PRINTRTHD threshold BSC6900 (Optional) the serial port is stopped. 040100
SET
Private Key File CERTFILE(Op MRFD-
PrivKey Name BSC6900 tional) Name of the private key file 210305
Identifies the DSP protocol type,
including ITUT(International
BTS Port SET
Telecommunication Union -
Detection BTSOTHPAR Port detection sequence used GBFD-
Telecommunication
PROBESEQ Sequence BSC6900 A(Optional) during BTS startup. 118601
Standardization Sector),
ANSI(American National
ADD Standards Institute), and
SS7 protocol N7DPC(Optio TTC(Telecommunication GBFD-
PROT type BSC6900 nal) Technology Committee (Japan)). 111804
SET
PS Port select BSC6900 OPT(Optional) Port selection None
SET
COPTLNK(Ma
PS Port select BSC6900 ndatory) Port selection None
ADD
PSHPRIDATA PS high PRI data TRMMAP(Opt
PATH path BSC6900 ional) PS high PRI data path None
ADD
PSHPRIDATA PS high PRI data TRMMAP(Opt
PRI priority BSC6900 ional) PS high PRI data priority None
ADD
PS High PRI GCELL(Optio Priority of the PS high priority GBFD-
PSHPSP Service PRI BSC6900 nal) service 111705
Period for sending the packet
message PSI. If the period is too
long, the message PSI cannot be
obtained in realtime. If the period is
too short, the message PSI is
SET broadcast frequently, which
PSI1 Repetition GCELLPSI1( occupies too much system GBFD-
PSI1RPT Period BSC6900 Optional) resources. 119102
Whether the BSC supports the
SET state message PSI. The state
PSISTATUSIN Support PSI GCELLPSI1( message PSI refers to PSI GBFD-
D Status Message BSC6900 Optional) STATUS. 119102
ADD
PSLPRIDATA PS low PRI data TRMMAP(Opt GBFD-
PATH path BSC6900 ional) PS low PRI data path 118605
ADD
PSLPRIDATA PS low PRI data TRMMAP(Opt GBFD-
PRI priority BSC6900 ional) PS low PRI data priority 118605
ADD
PS Low PRI GCELL(Optio Priority of the PS low priority GBFD-
PSLPSVP Service PRI BSC6900 nal) service 111705
Threshold of the receive level for
PS OtoU HO SET triggering the handover of the PS
PSOTOUREC Receive Level GCELLHOIU services from the overlaid subcell GBFD-
EIVETHRSH Threshold BSC6900 O(Optional) to the underlaid subcell 113201
SET
GCELLCCAC Minimum access level of the
PSRACHACC PS RACH Min. CESS(Option random access channel (RACH) in GBFD-
LEV Access Level BSC6900 al) the PS domain 111003
PS Resource SET
Whether to enable the DPSU0 to
PSRESREQS REQ Statistical BSCFCPARA( Statistical period for the arrival of GBFD-
SET supply power for the BTS.
TATPERIOD Period BSC6900 Optional) PS resource requests 111705
BTSAPMUBP In multi-mode scenario, the value
(Optional) of this parameter in one mode
SET must be the same as the value of
Whether to enable the DPSU1 to
DPSU 0 BTSDPMUBP the corresponding parameter in GBFD-
SET supply power for the BTS.
PSU0 Configured BSC6900 (Optional) another mode. 111202
BTSAPMUBP In multi-mode scenario, the value
(Optional) of this parameter in one mode
SET must be the same as the value of
DPSU 1 BTSDPMUBP the corresponding parameter in GBFD-
PSU1 Configured BSC6900 (Optional) another mode. 111202
Whether to enable the DPSU2 to
supply power for the BTS.
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
Whether to enable the DPSU2 to
DPSU 2 BTSAPMUBP the corresponding parameter in GBFD-
supply power for the BTS.
PSU2 Configured BSC6900 (Optional) another mode. 111202
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
Whether to enable the DPSU3 to
DPSU 2 BTSDPMUBP the corresponding parameter in GBFD-
supply power for the BTS.
PSU2 Configured BSC6900 (Optional) another mode. 111202
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
Whether to enable the DPSU4 to
DPSU 3 BTSDPMUBP the corresponding parameter in GBFD-
supply power for the BTS.
PSU3 Configured BSC6900 (Optional) another mode. 111202
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
Whether to enable the DPSU5 to
DPSU 4 BTSDPMUBP the corresponding parameter in GBFD-
supply power for the BTS.
PSU4 Configured BSC6900 (Optional) another mode. 111202
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
Whether to enable the DPSU6 to
DPSU 5 BTSDPMUBP the corresponding parameter in GBFD-
supply power for the BTS.
PSU5 Configured BSC6900 (Optional) another mode. 111202
In multi-mode scenario, the value
of
Thisthis parameter
parameter in one mode
specifies whether
SET must be
the BTS is the same as
to the value of
Whether toallowed
enable the enable
DPSU7the to
DPSU 6 BTSDPMUBP the corresponding
PSU Smart Control parameter in GBFD-
supply power for thefeature.
BTS.
PSU6 Configured BSC6900 (Optional) another
When mode.
this parameter is set 111202
In multi-mode scenario, the to YES,
value
the BTS
of this automatically
parameter in one enables
mode or
SET disables
must be the the same
PSU according
as the valueto the
of
DPSU 7 BTSDPMUBP traffic volume to improve
the corresponding the in
parameter GBFD-
PSU7 Configured BSC6900 (Optional) efficiency
another mode.of the PSU. When this 111202
parameter is set to NO, the PSUs
Threshold of the receive level for
of the BTS are all working.
PS UtoO HO SET triggering the handover of the PS
The following types of BTS support
PSUTOOREC Receive Level GCELLHOIU services from the underlaid subcell GBFD-
the PSU Smart Control feature:
EIVETHRSH Threshold BSC6900 O(Optional) to the overlaid subcell 113201
BTS3012AE
BTS3900A, BTS3900, DBS3900,
PSUTURNIN SET and BTS3900L: support the PSU
GOFFENABL PSU Turning Off BTSOTHPAR Smart Control feature through the GBFD-
E Enable BSC6900 A(Optional) matching APM30. 111608
Self-healing SET
Switch for OMU SLFSLVSW(O Switch for the self-healing of the
PSW Process BSC6900 ptional) OMU processes None
SET
ALMPORT(M MRFD-
PT Port Type BSC6900 andatory) Port type of environment alarm 210304
ADD
Subnet Protocol NSE(Mandato GBFD-
PT Type BSC6900 ry) Subnet protocol type 119001
SET
BTSENVALM
PORT(Option MRFD-
PT Port Type BSC6900 al) Alarm port type 210304
SET
E1T1(Optional
PTCODE Line code BSC6900 ) Line coding method None
SET
Frame receive E1T1(Optional
PTRXT Structure BSC6900 ) Receiving frame structure None
ADD
SET
Frame send BTSABISHDL
E1T1(Optional
PTTXT Structure BSC6900 CPATH(Mand
) Sending frame structure None
atory)
ADD
SET
BTSBIND2HD
E1T1(Optional This parameter specifies the patch
LCPATH(Man
PTTYPE Frame Structure BSC6900 ) Frame
versionstructure
loaded to the BTS. None
datory)
ADD This parameter can be set to only
GTRXBIND2H a hot patch version. You can use
HDLC Path Index DLCPATH(Ma either
Number of of
thea following
BTS HDLC methods
path. Ittois GBFD-
PTUID In BTS BSC6900 ndatory) query
uniquethe version
in one number of the
[BTS]. 118401
BTS
Power hot patch.type. When the
system
Method 1: If the BTS
PMU is installed on thehotrack,
patch
youis
SET downloaded
can select thetocustom
the OMU through
power
ETHPORT(Ma the MMLtype.
command DLD
system
PTYPE Port type BSC6900 ndatory) Ethernet
BTSPATCH, port typecan run the MML None
In multi-modeyou scenario, the value
command LST BTSPATCH
of this parameter in one mode to
SET obtain
must be thethenumber
same as of the
the hot patch
value of
Power System BTSAPMUBP package and the hot
the corresponding patch version
parameter in GBFD-
PTYPE Type BSC6900 (Optional) according
another mode. to the returned result. 111202
Method 2: If the BTS hot patch is
not downloaded to the OMU, you
SET
can decompress the BTS hot
Certificate File CERTFILE(Op MRFD-
patch package. Then, check the
PubCert Name BSC6900 tional) Name of the certificate file 210305
patchcfg.xml file in the level-1
SET directory of the compressed
BTSAUTODL package. The value after the label
BTS Patch DACTINFO(O "PatchVersion" is the software GBFD-
PV Version BSC6900 ptional) version. 111202
LOD
BTSPATCH(M
andatory)
CON
BTSPATCH(M GBFD-
PV Patch Version BSC6900 andatory) Number of the patch version 111202
Period timer of PVC utilization
SET report. This timer is started during
PVC Utilization BSCPSSOFT initialization. When the timer
PVCUSERAT Report Period PARA(Option
DLD expires, the PVC utilization GBFD-
ETIMER Timer BSC6900 al)
RETANTCFG( information is reported. 510002
ADD
Mandatory)
OP(Mandator
ULD
SET
y)
Private Key BTSDEVFILE(
CERTFILE(M MRFD-
DLD
PWD Password BSC6900 Mandatory)
andatory) Private key password 210305
LICENSE(Ma
DLD
ndatory) GBFD-
BTSPATCH(M
ULD 111203
andatory)
LICENSE(Ma MRFD-
ULD
PWD Password BSC6900 ndatory) Password 210305
BTSLOG(Man User password for the FTP server.
datory) When the FTPServer.exe file
DLD downloaded through the LMT is
BTSSW(Mand installed, the user password is GBFD-
PWD User Password BSC6900 atory) admin. 111202
SET
Minimum PWDPOLICY( Minimum length of the user MRFD-
PwdMinLen Password Length BSC6900 Optional) password 210305
SubRack1 SET
Storage Battery BTSBAT(Opti Whether to configure a battery GBFD-
R1BatAllow Config Permit BSC6900 onal) rack for rack 1 111202
Auxiliary
Ratio of thedevices
maximumof rack 2. This
charging
parameter contains
current of the batteryeight
packbits.
SubRack1 SET The eight bits, from1the
configured for rack to most
the
Storage Battery BTSBAT(Man Capacity
significant of the battery rack GBFD-
capacity ofbitthetobattery
the least
pack. For
R1BatCap Capacity BSC6900 datory) configured
significant for indicate
bit, rack 1 whether to 111202
example, assume that the battery
install
pack hasa voltage stabilizer,
a capacity of 200internal
AH. If
SubRack1 SET battery, transmission
this parameter power
is set to 0.15C,supply,
the
Storage Battery BTSBAT(Man temperature
maximum chargingcontrol current
unit, auxiliary
of the GBFD-
R1BatCoeff Coefficient BSC6900 datory) device
battery 5, auxiliary
pack is 30 Adevice
(= 0.15 6, x 200). 111202
auxiliary device 7, and auxiliary
device 8. When a bit is set to 1, the
SubRack1 SET
relevant auxiliary device is
Storage Battery BTSBAT(Man Type of the battery rack configured GBFD-
installed. When a bit is set to 0, the
R1BatType Type BSC6900 datory) for rack 1 111202
relevant auxiliary device is not
installed. For example, if this
SubRack2 SET parameter is set to 10000000, rack
Auxiliary BTSAUXEQP( 2 is configured with an auxiliary GBFD-
R2AuxDev Equipment BSC6900 Optional) voltage stabilizer. 111202
SubRack2 SET
Storage Battery BTSBAT(Opti Whether to configure a battery GBFD-
R2BatAllow Config Permit BSC6900 onal) rack for rack 2 111202
SubRack2 SET
Storage Battery BTSBAT(Man Capacity of the battery rack GBFD-
R2BatCap Capacity BSC6900 datory) configured for rack 2 111202
Ratio of the maximum charging
current of the battery pack
configured for rack 2 to the
capacity of the battery pack. For
example, assume that the battery
pack has a capacity of 200 AH. If
SubRack2 SET this parameter is set to 0.15C, the
Storage Battery BTSBAT(Man maximum charging current of the GBFD-
R2BatCoeff Coefficient BSC6900 datory) battery pack is 30 A (= 0.15 x 200). 111202
SubRack2 SET
Storage Battery BTSBAT(Man Type of the battery rack configured GBFD-
The NS performs location
R2BatType Type BSC6900 datory) for rack 2 111202
management based on routing
areas during GPRS packet
ADD services. Each routing area has a
GEXT2GCEL routing area identifier, which is MRFD-
RA RAC BSC6900 L(Optional) broadcast as a system message. 210301
The NS performs location
management based on routing
ADD areas during GPRS packet
GEXT3GCEL services. Each routing area has a MRFD-
RA Route Area BSC6900 L(Optional) routing area identifier. 210301
SET
GCELLGPRS( Identifies the routing area of the GBFD-
RA Routing Area BSC6900 Optional) current cell 114101
SET
BTSAUTOPL GBFD-
ANCFG(Optio 510701
RA Route Area BSC6900 nal) Route area of the current cell
ADD
GCELLQUICK GBFD-
SETUP(Optio 510701
RA Route Area BSC6900 nal) Route area of the current cell
SET
BTSAUTOPL
ANCFG(Optio GBFD-
RA1 Route Area BSC6900 nal) Route area of the current cell 510702
SET
GCELLCCAC Minimum access level of the
Level threshold of the MS random
RACHACCLE CS RACH Min. CESS(Option random access channel (RACH) in GBFD-
access for the BTS to determine
V Access Level BSC6900 al) the CS domain 111003
the RACH busy state. When the
receive level of the random access
SET burst timeslot is greater than this
Number of RACH burst timeslots in
RACHBUSYT RACH Busy GCELLCCBA threshold, the BTS considers that GBFD-
a RACH load measurement.
HRED Threshold BSC6900 SIC(Optional) the timeslot is busy. 111003
The value of this parameter
indicates the interval during which
Average RACH SET the BSC6900 determines whether
RACHLDAVE Load Timeslot GCELLCCCH an RACH timeslot is busy. For GBFD-
RSLOT Number BSC6900 (Optional) details, see GSM Rec. 08.58. 111003
SET
BTSETHPOR GBFD-
RATE Rate BSC6900 T(Optional) Port rate of the IP interface board 118601
Switch for controlling the AMR
rate. Value 0 indicates that C/I is
SET used to control the AMR rate.
RATECTRLS AMR Rate GCELLCCAM Value 1 indicates that BER is used GBFD-
W Control Switch BSC6900 R(Optional) to control the AMR rate. 115506
This parameter specifies whether
SET the RATSCCH function is enabled
RATSCCHEN Is Ratscch GCELLCCAM during
Type ofthe call establishment
recording the execution GBFD-
ABLED Function Enabled BSC6900 R(Optional) procedure.
result 115506
LASTRBP indicates the last
1. REC_ALL:
Original indicatingreport
measurement that the
rollback point. The system
SET execution results
sampling rate (forof all the
each call, one
automatically takes the position
RAWMRSAM Raw MR Sample GMRCTRL(O commands are recorded no
out of four measurement matter
reports is GBFD-
where the current configuration
PLE Ratio BSC6900 ptional) whether
collected)the commands are 110801
command is executed as the
executed successfully.
rollback point, and the user does
2. REC_ERR: indicating that only
BEG not need to specify a rollback
the execution results of failed
Type of Rollback FORWARD(M point. APPOINTRBP indicates the MRFD-
commands are recorded.
RBPTYPE Point BSC6900 ADD
andatory) rollback point specified by the user. 210301
3. REC_NON: indicating that the
BTSRXUCHAI
execution results of all the
N(Mandatory)
RUN commands are not recorded no
SET Number of the RXU chain or ring.
Result Recording BATCHFILE( matter whether the commands are GBFD-
BTSBREAKP The value scope is 0~11 for Non-
RCDT Type BSC6900 Optional) executed successfully. 111203
OINT(Mandat SingleRAN BTS and 0~249 for
ory) SingleRAN BTS. The RXU chain
SPT No. is unique in the same BTS. A
BTSRXUCHAI maximum of 12 RXU chains can GBFD-
RCN Chain No. BSC6900 N(Mandatory) be configured in one BTS. 111202
SET
Whether to re-assign the radio
GCELLCCBA Whether to allow the reassignment GBFD-
channels on a different band or on
REASSEN Allow Reassign BSC6900 SIC(Optional)
function 112501
the same band. This can help
minimize the decrease in service
SET quality due to interference, faulty
REASSFREQ Frequency Band GCELLCCAD( TRX paths, or faulty project GBFD-
BAND of Reassign BSC6900 Optional) constructions. 112501
GBFD-
RECEIVEQU SET IUO cell receive quality threshold 113201
ALTHRSHAM ReceiveQualThrs GCELLHOIU (AMRFR), which is used for IUO GBFD-
RFR hAMRFR BSC6900 O(Optional) handover decision 115501
GBFD-
One of the parameters that decide
RECEIVEQU SET IUO cell receive quality threshold 113201
the underlay and overlay areas.
ALTHRSHAM ReceiveQualThrs GCELLHOIU (AMRHR), which is used for IUO GBFD-
The underlay and overlay areas
RHR hAMRHR BSC6900 O(Optional) handover decision 115502
are determined by "RX_QUAL
Threshold", "RX_LEV Threshold",
One of the parameters that decide
SET "RX_LEV Hysteresis", "TA
the underlay and overlay areas.
RECLEVHYS RX_LEV GCELLHOIU Threshold", and "TA Hysteresis" GBFD-
The underlay and overlay areas
T Hysteresis BSC6900 O(Optional) together. 113201
are determined by "RX_QUAL
Threshold", "RX_LEV Threshold",
SET "RX_LEV Hysteresis", "TA
RECLEVTHR RX_LEV GCELLHOIU Threshold", and "TA Hysteresis" GBFD-
ES Threshold BSC6900 O(Optional) together. 113201
ADD
BRD(Mandato Whether to back up the data of the MRFD-
RED Backup BSC6900 ry) board 210301
Interval to
Reduce SET
Transmission BSCPSSOFT Interval for releasing the
ReduceTrans Bandwidth when PARA(Option secondary links in the congestion GBFD-
BwInt Congested BSC6900 al) state 111705
Number of
Transmission SET
Bandwidth to BSCPSSOFT Secondary link bandwidth that is
ReduceTrans Reduce when PARA(Option released each time in the GBFD-
BwNum Congested BSC6900 al) congestion state 111705
SET
RELATEDMO Associated BTSRXUBP( Function to be performed by two GBFD-
DFUNC Board Function BSC6900 Optional) associated modules 111202
SET
Associated BTSRXUBP( Slot number of the associated GBFD-
RELATEDSN Board SN BSC6900 Mandatory) module 111202
SET
Tributary Number of the DFCB that
RELATEDSR Associated BTSRXUBP( Subrack number of the associated GBFD-
is cascaded to the DFCU. The
N Board SRN BSC6900 Mandatory) module 111202
"Extend Connection" attribute
describes the cascading
SET relationship of the DFCB, which
RELATEDTR Cascading BTSDFCUBP( helps the DFCU perform the six-in- GBFD-
ADD
ACK Tributary BSC6900 Optional) one function. 111202
TRMMAP(Opt
ional)
ADD
TRMFACTOR GBFD-
REMARK Remark BSC6900 (Mandatory) Remark 118605
ADD
Route use IPRT(Mandat Purpose description of the route
REMARK description BSC6900 ory) record None
ADD
A key parameter that indicates how
REMOTENSV NSVLREMOT Remote NSVL ID of the Gb IP GBFD-
many times the BSC6900
LI Remote NSVL ID BSC6900 E(Mandatory)
route 118603
broadcasts cell messages. You
can obtain the cell broadcast times
ADD by running the "DSP GSMSCB"
GSMSCB(Ma command. GBFD-
REP Repeat BSC6900 ndatory) The value 0 indicates no repeat. 113602
SET
REPEATSAS Repeated GCELLCCBA Whether to enable the Repeated GBFD-
ET SACCH BSC6900 SIC(Optional) SACCH function for the cell 113721
SET
Whether to perform resource
BTSENVALM
checks on the resource usage
Reserved Alarm PORT(Option Whether to reserve the binding of MRFD-
system and resource management
RESALMID ID. BSC6900 al) the alarm ID and the alarm port 210304
system. Resource checks can
Indicating that during cell
prevent resource hanging in case
reselection, the level of the target
SET of anomalies. Resource checks
cell should meet the following
ResCheckAllo ResCheckAllowe OTHSOFTPA cover channel resources, transmit GBFD-
condition: Level of target cell >
wed d BSC6900 RA(Optional) resources, and BSC resources. 111203
[MAX (level of serving cell, "Cell
Reselection Level Threshold") +
SET "Cell Reselection Hysteresis"]. In
Cell Reselection GCELLNC2P this way, ping-pong handovers do GBFD-
RESELHYST Hysteresis BSC6900 ARA(Optional) not occur. 116201
SET
BTSOTHPAR The waiting time from BTS detect GBFD-
RESETTIME BTS Reset Time BSC6900 A(Optional) OML disconnect to BTS reset. 111612
SET
RESETTIME BSCNSPARA( Duration of the peer response GBFD-
R Reset Timer BSC6900 Optional) timer during NSVC reset 114101
Whether the HO RQD messages
sent by the BSC to an MSC carry
TST
response request cells. Response
SNDRSI(Man Reason for activating the radio GBFD-
request cells are optional. They
RESID Reason BSC6900 datory) status procedure 119001
are used to inform the MSC
whether it needs to return HO
Response on SET REJECT messages when HO
Out-BSC HO OTHSOFTPA RQD messages fail to trigger GBFD-
DLD
RespReqSel Req BSC6900 RA(Optional) handovers. 111804
LICENSE(Opti
onal) GBFD-
ULD 111203
Resume Broken LICENSE(Opti Whether to resume broken MRFD-
REST Downloads Flag BSC6900 onal) download 210403
GBFD-
Sub-protocol ADD 118611
RESTARTTM negotiate out PPPLNK(Opti Duration of the PPP/MP link restart GBFD-
R time[S] BSC6900 onal) timer 118622
When assign channels, the BSC
ensures that the sum of the GBFD-
Sub-protocol ADD number of channels occupied by 118611
RESTARTTM negotiate out MPLNK(Optio Duration
high-priority of theusersPPP/MP and the link restart
number GBFD-
EXP
R time[S] BSC6900 nal) timer
of idle channels reserved for high- 118622
ALMLOG(Opti
onal) priority users is no smaller than
STA this parameter. Every time the
Alarm Restore ALMLOG(Opti BSC assigns channels to a user MRFD-
RESTYPE Type BSC6900 onal) 1. This priority
whose
Restoration parameter type ofspecifies
is lower thethan alarm 210304
whether
"Highest to configure
Priority", the DRFU,
it checks
Time forGRFU,
MRFU, the BSC orof to
XRFU initiateby the slot of
or
whether the sum the number
ADD common
link. measurement or
channels occupied by users of
RESUMETIM GNRNC(Optio information
2. When setting exchange procedure MRFD-
"Highest Priority"the and BTS theto support
number
ER Resume Timer BSC6900 nal) after
the this procedure
configuration fails 211402
of idle channels isoflarger the RFU thanby the
Maximum
slot, set ofthis number
parameter of levels"YES". that the
SET number the reserved to channels.
BTS
When RF powerthe decreases. This
GCELLCHMG If yes, setting
the BSC normally BTS notassigns to
parameter
support the is used
configurationto control of thethe
REVCHANNU Reserved BASIC(Option Interval
channelsfor forsending
the user; theif radio
not, the GBFD-
decrease
RFU in the BTS RF power. If
M Channel Number BSC6900 al) BSC by
resourcedoes slot,notset
indication thismessages.
assign parameter
a TCHF. The to 116001
the
"NO". value is too large, the BTS
TRX reports the interference level
Interval
power for executing
decreases too the
3.
forIfeach
this parameter
of the channels is much.
setthat If the
to "YES",
have
SET scheduled
value is too subtask
small, the BTS power
you
beenmust idle enter
for thethe wholenumbers of the
RFMAXPWR Max RC Power GCELLOTHE The unit isless
decreases determined
and the the according
power MRFD-
subrack
measurement and slot where
period. new
DEC Reduction BSC6900 XT(Optional) to the timeeffect
decrease mode. is not good. 210301
board is located.is used by a BTS
This parameter
1. If the time mode is set to
If
toyou
informneed thetoBSC6900
specify the of CPRI
the
"DAILY_T" or "DAILY_C", the unit
SET connection
interferencerelations levels on(SFP idle port
is day.
RFRESINDP Radio Resource GCELLCCCH number
channelsand of acascading
TRX. For level) details, GBFD-
2. If the time mode is set to
RD Report Period BSC6900 (Optional) based
see GSM on a rule08.58
Rec. that isand different
08.08. 111004
"WEEKLY_T" or "WEEKLY_C", the
from the cabinet mapping rule
Satellite
unit is week. card protocol that is
specified by the system, the
ADD enabled
3. If thetotime communicate
mode is setwith to the
parameters "RXU Chain Head Port
SUBTSK(Opti satellite
"MONTHLY_T" card connectingor "MONTHLY_C", to the GBFD-
No." and "Insert RXU Position"
RFT Execute Interval BSC6900 onal) DGPS.
the unit Ifis"RGPS"month. is specified, it 111203
must be specified.
indicates that the RGPS satellite
4. If this parameter is set to "NO",
card
Time protocol is enableda to
for disconnecting call when
you must set "TRX Board No.",
communicate
the MSLink failsNo." towith
decode the satellite
the Chain card
RFUCFGBYS Configure RFU ADD "RFU and "RXU GBFD-
connecting
SACCH. to the DGPS. If "GPS"
LOT by Slot BSC6900 BTS(Optional) Head PortOnce No.".a dedicated 110000
is specified,
channel it indicates
is assigned to thethatMS, the the
GPS
counter satellite card protocol
S is enabled and the is initial
SET enabled
value is set to communicate
to this parameter with the
RGPSINDICA BTSDGPSBP( satellite
value. card connecting to the GBFD-
TION GPS or RGPS BSC6900 Optional) DGPS.
Each timetoan SACCH 510401
Whether support ranmessage
information is
not decoded, the
management (RIM). counterIN theS RIM
decreases
procedure, by 1. Each time
RANs(Radio Accessan
ADD SACCH
Network)message can exchange is correctly
messages GBFD-
RIMSUP RIM Support BSC6900 NSE(Optional) decoded,
through the thecorecounternetwork. S increases 116301
by 2. When the counter S is equal
to 0, the downlink radio link is
SET The loopback channel number
considered as failed. Therefore,
E1T1LOP(Opt when the port loopback mode is
when the voice or data quality is
RLCN Channel No. BSC6900 ional) set to TDM remote loopback None
degraded to an unacceptable
situation and it cannot be improved
SET through power control or channel
Radio Link GCELLCCBA handover, the connection is to be GBFD-
RLT Timeout BSC6900 SIC(Optional) re-established or released. 111004
Remote TC
Subrack Ater SET
RMTTCATER Transmission BSCBASIC(O Transmission mode on the Ater GBFD-
TRANSMODE Mode BSC6900 ptional) interface of the remote TC subrack 116902
RNC ID of a 3G external cell. The
Internal index of a neighboring
ADD value of this parameter must be
RNC. This parameter is set to 255
GEXT3GCEL consistent with the data MRFD-
when the neighboring RNC that
RNCID RNC ID BSC6900 L(Mandatory)configuration at the RNC. 210301
serves the 3G external neighboring
is not configured. You can use the
ADD "LST GNRNC" command to check
Neighboring GEXT3GCEL whether the neighboring RNC is MRFD-
ADD
RNCINDEX RNC Index BSC6900 L(Optional) configured. 211402
GNRNC(Man
datory)
ADD
Neighboring GIURGCONN Internal index of a neighboring MRFD-
RNCINDEX RNC Index BSC6900 (Mandatory) RNC 211402
SET
Root Certificate CERTFILE(Op MRFD-
RootCert File Name BSC6900 tional) Name of the root certificate file 210305
ADD
SGSNROUTE
INFO(Mandat GBFD-
ROUTENO Route No. BSC6900 ory) Identifies a router uniquely 118603
ADD
SGSNROUTE
ROUTEPORT INFO(Mandat GBFD-
NO Route Port No. BSC6900 ory) Router port number 118603
ADD
IPPATH(Mand Resource group number of the GBFD-
RSCGRPN Rscgrp No. BSC6900 atory) PATH 118605
ADD
OPC(Optional Whether to enable the restart GBFD-
ADD
RSTFUN Restart switch BSC6900 ) function 111804
BTSPPPLNK(
Optional)
ADD
BTSMPLNK( GBFD-
RSTIME Restart Timer BSC6900 Optional) Timer 118611
SET
Max Channel GCELLCHMG Maximum number of TCH
RSVCHMFO Num Reserved BASIC(Option channels reserved for emergency GBFD-
RECNUM for EC BSC6900 al) call users 110202
SET
TRANSPATC
Reserved HPARA(Optio Parameter 1 reserved for future
RSVDPARA1 Parameter 1 BSC6900 nal) use. None
SET
TRANSPATC
RSVDPARA1 Reserved HPARA(Optio Parameter 10 reserved for future
0 Parameter 10 BSC6900 nal) use. None
SET
TRANSPATC
Reserved HPARA(Optio Parameter 2 reserved for future
RSVDPARA2 Parameter 2 BSC6900 nal) use. None
SET
TRANSPATC
Reserved HPARA(Optio Parameter 3 reserved for future
RSVDPARA3 Parameter 3 BSC6900 nal) use. None
SET
TRANSPATC
Reserved HPARA(Optio Parameter 4 reserved for future
RSVDPARA4 Parameter 4 BSC6900 nal) use. None
SET
TRANSPATC
Reserved HPARA(Optio Parameter 5 reserved for future
RSVDPARA5 Parameter 5 BSC6900 nal) use. None
SET
TRANSPATC
Reserved HPARA(Optio Parameter 6 reserved for future
RSVDPARA6 Parameter 6 BSC6900 nal) use. None
SET
TRANSPATC
Reserved HPARA(Optio Parameter 7 reserved for future
RSVDPARA7 Parameter 7 BSC6900 nal) use. None
SET
TRANSPATC
Reserved HPARA(Optio Parameter 8 reserved for future
RSVDPARA8 Parameter 8 BSC6900 nal) use. None
SET
TRANSPATC
Reserved HPARA(Optio Parameter 9 reserved for future
Number of reserved idle channels.
RSVDPARA9 Parameter 9 BSC6900 nal) use. None
If this parameter is set too small,
the TRX may be frequently
SET enabled/disabled; if this parameter
RsvIdleChan Reserve Idle BSCDSTPA(O is set too large, idle TRX will not GBFD-
Num Channel Number BSC6900 ptional) be timely closed. 111602
SET
MSP(Optional Recovery mode of the MSP GBFD-
RT Revertive type BSC6900 ) protection group 111701
ADD
M3LE(Optiona
Routing context. The routing
l) context identifies a specified route.
ADD Whether to enable
If the routing theis real-time
context to be
transport
M3DE(Option
configured,control protocol
its value must(RTCP)
be GBFD-
RTCONTEXT Routing Context BSC6900 al) function.
negotiatedThe BSC6900
between the and the
two ends. 118602
MSC negotiate whether and how
to compress the data over the A
ADD
interface according to the RTCP.
RTCPBWRAT RTCP Bandwidth GCNNODE(O Ratio of the RTCP path bandwidth GBFD-
The setting of this parameter on
IO Usage BSC6900 ptional) to the A interface bandwidth 118602
the BSC6900 side must be
consistent with that on the MSC
ADD side. This parameter is valid only
RTCPSWITC GCNNODE(O when IP transmission is used over GBFD-
H Enable RTCP BSC6900 ptional) the A interface. 118602
ADD
Destination OMUIPRT(Ma
RTDEST Network Address BSC6900 ndatory) destination IP address. None
ADD
RTDESTMAS Destination OMUIPRT(Ma
K Address Mask BSC6900 ndatory) routing mask. None
ADD
Backward IPPATH(Mand GBFD-
RXBW Bandwidth BSC6900 atory) Receive bandwidth of IP path 118605
ADD
Backward RSCGRP(Ma GBFD-
RxBw Bandwidth BSC6900 ndatory) Receive bandwidth 118605
SET
Minimum GCELLSERV Minimum receiving power level for
RXLEVACCM Receiving level PARA(Option the MS in the cell to access the GBFD-
For AMR FR voice services, a fixed
IN for Access BSC6900 al) system 114101
amount of offset is added to the
Interfere HO corresponding grade of the
Qual. Thresh SET received signal quality for the
Offset for AMR GCELLAMRQ interference handover of non-AMR GBFD-
RXLEVOFF FR BSC6900 UL(Optional) FR voice services. 115501
SET
GCELLBASIC Minimum received signal level of
Minum Access PARA(Option the MS. This level is reported in GBFD-
RXMIN RXLEV BSC6900 al) the system information. 111101
Whether to use the emergency GBFD-
SET handover algorithm in case the 110601
RXQCKFALL Rx_Level_Drop GCELLHOBA receive level of the MSs drops GBFD-
HOEN HO Allowed BSC6900 SIC(Optional) rapidly, thus preventing call drops. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 1 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL1 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 10 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL10 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 11 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL11 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 12 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL12 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 2 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL2 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 3 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL3 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 4 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL4 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 5 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL5 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 6 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL6 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 7 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL7 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 8 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL8 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
Threshold for the interference GBFD-
Interfere HO SET handover of Non-AMR FR voice 110601
Qual. Thresh 9 GCELLAMRQ services. AMRFR refers to GBFD-
RXQUAL9 for Non-AMR FR BSC6900 UL(Optional) Adaptive Multi-Rate Full Rate. 510501
ADD
TRXBIND2PH
RXUCHAINN YBRD(Mandat Number of the RXU chain to which GBFD-
O RXU Chain No BSC6900 ory) the RXU belongs 111202
SET Number of the RXU chain. The
RXUCHAINN BTSRXUBP( RXU chain No. is unique in one GBFD-
O RXU Chain No. BSC6900 Mandatory) BTS. 111202
ADD
RXUCHAINN BTSRXUBRD Number of the RXU chain where GBFD-
O RXU Chain No. BSC6900 (Mandatory) the board is located 111202
ADD
TRXBIND2PH
YBRD(Mandat GBFD-
RXUIDTYPE RXU Index Type BSC6900 ory) Index type of the RXU 111202
SET
BTSRXUBP( GBFD-
RXUIDTYPE RXU Index Type BSC6900 Mandatory) Type of the RXU board index 111202
ADD
TRXBIND2PH
YBRD(Mandat GBFD-
RXUNAME RXU Name BSC6900 ory) Name of the RXU 111202
SET
BTSRXUBP( Name of the RXU board. The RXU GBFD-
RXUNAME RXU Name BSC6900 Mandatory) name is unique in one BTS. 111202
ADD
BTSRXUBRD GBFD-
RXUNAME RXU Name BSC6900 (Mandatory) Name of an RXU 111202
ADD
TRXBIND2PH
RXU Chain YBRD(Mandat Position number of the RXU on the GBFD-
RXUPOS Position BSC6900 ory) RXU chain 111202
SET
RXU Chain BTSRXUBP( Position No. of the RXU board on GBFD-
RXUPOS Position BSC6900 Mandatory) the RXU chain 111202
ADD
RXU Board BTSRXUBRD Position of the RXU board on an GBFD-
RXUPOS Position BSC6900 (Mandatory) RXU chain 111202
SET
BTSRXUBP( GBFD-
RXUTYPE RXU Board Type BSC6900 Mandatory) Type of the RXU board 111202
Whether to enable the switch to
set the S1 value. S1 byte, also
called the synchronization status
S1 value setting SET byte, is one of the optical
S1SWITCH switch BSC6900 OPT(Optional) connection parameters. None
The value ofvalue.
S1 sending this parameter
It is a
consists of 32 bits,
synchronization each
status of which
byte used
determines
by the local whether to enable
end to examine thethe
corresponding special analog
quality of the received clock
alarm.
signals"0" indicates
before thatend
the local the alarm
is enabled,
switches to and "1" source
a clock indicates that
with
the alarm
higher is disabled.
quality. Whenthe
The smaller an
Whether to enable the special
SET item
valueisofselected,
S1 is, the the corresponding
lower the clock
analog alarm.
S1VALUE S1 Value BSC6900 OPT(Optional) analog alarm switch is disabled.
quality is. None
In multi-mode scenario, the value
The available items are
of this parameter in one mode
BT1_DISABLE, AH_DISABLE,
SET must be the same as the value of
AT1_DISABLE, AT2_DISABLE,
Special Analog BTSDEMUBP the corresponding parameter in MRFD-
and BT2_DISABLE.
SAADIS Alarm Enabled BSC6900 (Optional) another mode. 210304
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
Whether the MSC independently
Special Analog BTSAPMUBP the corresponding parameter in GBFD-
processes the trunking services.
SAAF Alarm Flag BSC6900 (Optional) another mode. 111202
When this parameter is set to YES,
the MSC independently processes
ADD the trunking services, that is, the
GCNNODE(O Adjustment step of
trunking services theprocessed
are downlink GBFD-
SaGsmrMsc Trunking MSC BSC6900 ptional) signal
only byquality
this MSC.threshold in power 510301
control algorithm III for MSs that
SET
support SAIC. The network side
GCELLPWRB
uses a lower downlink signal
SAICALLOW ASIC(Optional Adjustment
Whether an step of the downlink
MS supports the SAIC GBFD-
quality threshold for SAIC-
ED Saic Allowed BSC6900 ) signal
functionquality threshold in power 118103
supported MSs in power control,
control algorithm III for MSs that
thus lowering the transmit power of
support SAIC. The network side
Power Control SET The value of this parameter
the corresponding BTS and
uses a lower downlink signal
SAICTHRED Threshold Adjust GCELLPWR2 consists
reducing of thefive bits, which in the
interferences GBFD-
quality threshold for SAIC-
APDTVALUE for SAIC BSC6900 (Optional) determines
whole network. whether to enable the 118103
supported MSs in power control,
alarms. "0" indicates that the
thus lowering the transmit power of
analog alarm is enabled, and "1"
Power Control SET the corresponding BTS and
indicates that the analog alarm is
SAICTHRED threshold Adjust GCELLPWR3 reducing the interferences in the GBFD-
disabled.
APDTVALUE for SAIC BSC6900 (Optional) whole network. 118103
In multi-mode scenario, the value
of this parameter in one mode
SET must be the same as the value of
Special Analog BTSDPMUBP the corresponding parameter in MRFD-
SALOG Alarm Enabled BSC6900 (Optional) another mode. 210304
SET
GCELLDYNT
SAMECVGCE Same Coverage URNOFF(Man Index of a cell with the same GBFD-
LLID Cell No BSC6900 datory) coverage as the current cell 111610
The BSC6900 checks the load of
SET
the same coverage cell of the
GCELLDYNT
target cell once a minute. When
SAMECVGCE Same Coverage URNOFF(Man Index type used when the GBFD-
the number of times in which the
LLIDTYPE Cell Index Type BSC6900 datory) command is executed 111610
load of the same coverage cell is
SET lower than "Same Coverage Cell
SAMECVGCE Same Coverage GCELLDYNT Load Threshold" is equal to the
LLLOADSTAT Cell Load Stat. URNOFF(Opti value of this parameter, the target GBFD-
TM Time BSC6900 onal) cell is disabled. 111610
A cell that can be disabled is
SET allowed to be disabled only when
SAMECVGCE Same Coverage GCELLDYNT the load of the same coverage cell
LLLOADTHR Cell Load URNOFF(Opti is lower than this threshold for a GBFD-
D Threshold BSC6900 onal) period. 111610
counter increases by 2.
When the value of this parameter
is 0, the BTS regards the radio link
as faulty. The BTS sends a
connection failure indication
message to the BSC6900. The
number of SACCH multi-frames
SET
and the radio link failure counter in
GCELLDYNT
the system message specify the
SAMECVGCE Same Coverage URNOFF(Man The value of this parameter GBFD-
radio link failure time on the uplink
LLNAME Cell Name BSC6900 datory) consists
Name of of thethree
same bits, which cell
coverage 111610
and that on the downlink
determines whether to enable the
respectively. The judgment
alarms. "0" indicates that the alarm
SET standard is whether the
is enabled, and "1" indicates that
SACCH Multi- GCELLCCBA measurement report in SACCH is GBFD-
the alarm is disabled.
SAMULFRM Frames BSC6900 SIC(Optional) correctly decoded. 111004
In multi-mode scenario, the value
Level
of thisspecifications
parameter in one of special
mode
SET Boolean
must be the value alarms.
same as the Two
value of
Whether to enable the special
Special Alarm BTSDPMUBP specifications
the corresponding are available:
parameterhigh in MRFD-
alarm switch.
SAS Switcher BSC6900 (Optional) level
anotherandmode.
low level. By default, only 210304
In multi-mode scenario, the value
alarms of the door status sensor
of this parameter in one mode
are low level, and alarms of the
SET must
Whetherbe the same as
to enable the value of
thesensor,
special
water sensor, smoke and
Special Alarm BTSDEMUBP the corresponding
Boolean alarms,are parameter
that is, water in MRFD-
infrared sensor high level.
SASE Switch Enabled BSC6900 (Optional) another
sensor mode.(bit 0), smog sensor
alarm 210304
In multi-mode scenario, the value
alarm
of this (bit 1), and in
parameter door
onesensor
mode
Special Alarm SET alarm
must be (bitthe2).same
All theasBoolean
the value of
Switch Valid Vol. BTSDEMUBP alarms are enabledparameter
the corresponding by default.in"0" MRFD-
SASV Level BSC6900 (Optional) indicates
another mode. that the alarm is enabled, 210304
and "1" indicates that the alarm is
disabled.The available items are
SET Whether to enable the energy
WS_DISABLE, SS_DISABLE, and
SAVEENABL Energy Saving BTSDOMUBP saving function of the TRX for the GBFD-
GS_DISABLE~2.
ED Support BSC6900 (Optional) BTS3002E. 111202
In multi-mode
This parameterscenario,
indicatesthe thatvalue
when
of
thethis
MSparameter
reports theinEMR, one mode
it adds
SET must be the
the value same
of this as the value
parameter to theof
Special Bool BTSAPMUBP the corresponding parameter
received signal level, and then in GBFD-
SBAF Alarm Flag BSC6900 (Optional) another
convertsmode.the result into the RXLEV 111202
value. For details, see GSM Rec.
COL 05.08.
SYNCINFO(M If the SCALE_Order
Number of the BTS. Thereported
BTS by
is GBFD-
SBTSID First BTS Index BSC6900 andatory) the MS is 10
numbered dBm, level
uniquely values 0-
in a BSC. 118201
63 map with -100 dBm to -37 dBm.
If the SCALE_Order reported by
COL
the MS is 0 dBm, level values 0-63
SYNCINFO(M Name of the BTS. The BTS is GBFD-
map with -110 dBm to -47 dBm.
SBTSNAME First BTS Name BSC6900 andatory) named uniquely in a BSC. 118201
If the SCALE_Order reported by
SET the MS is Automatic, the MS
GCELLCCUT When
chooses thethe
network receiveswhile
least SCALE
SCALEORDE RANSYS(Opti measurement
ensuring that thereports, in report
MS can GBFD-
R SCALE_ORDER BSC6900 onal) consideration
the most strong of level.
the accuracy of a 117501
single measurement report, the
SET
measurement values in certain
BSCPSTCDS
measurement reports are filtered
DSCP of CPMAP(Optio DSCP corresponding to the GBFD-
to represent the radio operating
SCDSCP STREAM[QoS] BSC6900 nal) streaming service 118603
environment. The parameter
specifies the number of
Serving Cell SET measurement reports used for
SCELLFILTE Filter Length MR GCELLHOFA filtering measurement information GBFD-
R Number BSC6900 ST(Optional) of the serving cell. 510102
ADD
NCELL(Mand
atory)
COL Number of the cell where the TRX
SYNCINFO(M reside. The cell is numbered MRFD-
ADD
SCELLID First Cell Index BSC6900 andatory) uniquely in a BSC. 210301
NCELL(Mand
atory)
COL
SYNCINFO(M GBFD-
SET
SCELLNAME First Cell Name BSC6900 andatory) Name of cell 1. 111202
GCELLSBC(O
ptional)
ADD A key parameter that indicates the
GSMSCB(Ma coding scheme of a simple cell GBFD-
SCHEME Coding Scheme BSC6900 ndatory) broadcast message 113602
STR
BTSTST(Opti GBFD-
ADD
SCHNNO Sub Channel No. BSC6900 onal) Number of the sub-channel 111202
SUBTSK(Man Command string of the scheduled
datory) subtask. This command can be
ADD only a service command, and the
SUBCMD(Ma system command cannot be added GBFD-
SCMD Command String BSC6900 ndatory) to the scheduled
Scrambling code subtask.
of a 3G cell. The 111203
scrambling code is used to
SET differentiate terminals or cells. It is
GMRSCOPE( used after
Type of spreadthe
querying spectrum.
scope of GBFD-
SCOPETYPE Scope Type BSC6900 Mandatory) Therefore, it does
collecting the not change
measurement the
report 111203
bandwidth of signals, but only
distinguishes the signals from
Subrack ADD
ADD different sources. Through
Communication SRCONPATH( Indicates the index of the inter- GBFD-
GEXT3GCEL scrambling, multiple transceivers
SCPIDX Path Index BSC6900 Optional) subrack connection path 111203
L(Mandatory) can use the same codes for
SET spread spectrum. Scrambling is GBFD-
Scrambling Code GCELLHOFD used to distinguish terminals on 114301
or Cell DBA2(Mandat the uplink and to distinguish cells GBFD-
EXP
SCRAMBLE Parameter Id BSC6900 ory) on the downlink. 114302
ALMLOG(Opti
onal)
STA
ALMLOG(Opti Start serial number of the alarm MRFD-
ADD
SCSN Start Serial No. BSC6900 onal) record 210304
SCTPLNK(Ma
ndatory)
ADD SCTP link number of XPU board.
M3LNK(Mand This number identifies an SCTP GBFD-
SCTPLNKN SCTP link No. BSC6900 atory) link uniquely. 118602
ADD
SUBTSK(Man Date when the scheduled task is GBFD-
SD Start Date BSC6900 datory) started 111203
SET
Alarm Log Saved ALMCAPACIT Maximum number of days for MRFD-
SD Time BSC6900 Y(Optional) storing history alarms 210304
SET
SD Alarm MSP(Optional GBFD-
SDALMTHD Threshold BSC6900 ) SD alarm triggering threshold 111701
STR
BTSLOG(Opti Number of SDCCH channels. GBFD-
SDATE Start Date BSC6900 onal) Rules
Start datefor SDCCH channel 111202
allocation: 1. Allocate channels 1
and 3 of main frequency B
SET
preferentially. 2. Allocate channels
TZ(Mandatory Start date of the daylight saving MRFD-
1, 3, 5, and 7 according to the
SDAY Start date BSC6900 ) time (DST) 210301
physical position order of the
ADD frequencies. Thus, the maximum
GCELLQUICK number of SDCCH channels is
SDCCHChannel SETUP(Optio Quality threshold
(actual number offor measuring- 1)
frequencies the MRFD-
SDCCHNUM Number BSC6900 nal) number
*4+2. of call drops on SDCCH. 210301
When call drop occurs on the
Whether
SDCCH, a thecall must camp
BSC6900 on the
determines
Waiting for MR SET Level
SDCCH threshold
for a for measuring
specific duration the
whether the downlink quality level
SDCCHWaitM on SDCCH GCELLHOAD number
before of callassigned
being drops onwith
multiplied by 10 is higher than this
SDCCH.
a traffic GBFD-
REn Switch BSC6900 (Optional) When
channel. call drop occurs on the 110502
threshold. If all the following four
SDCCH, the BSC6900 determines
conditions are met, the number of
whether the downlink receive level
Duration for SET call dropsfor
Duration onaSDCCH
call camping (receiveon the
is lowerthreshold
than this threshold. If the
SDCCHWaitM Waiting MR on GCELLHOAD Quality
quality)
SDCCHisbefore incremented for measuring
being by one. the
assigned GBFD-
downlink
number receive
ofdownlink
call level
drops is lower
on SDCCH.
RTimeLen SDCCH BSC6900 (Optional) First,
with athe traffic channel. quality level 110502
than
When this
callthreshold
drop and onthetheTA is
multiplied by 10occurs
is higher than this
DL Level smaller
SDCCH, than
the the
BSC6900TA threshold
determinesof
threshold. Second, the TA is
Threshold for SET Level
the threshold
serving cell, for
the measuring
number the
whether
smaller than the uplink
the TAquality
thresholdlevelofcall
of
SDDROPSTA SDCCH Call GCELLOTHE number
drops on
multiplied
ofSDCCH
call drops on SDCCH.
(receive level) is GBFD-
the servingbycell. 10 Third,
is higher thethan
uplinkthis
TDLLEV Drop BSC6900 XT(Optional) When call drop
incremented
threshold. by occurs
one.
If allthan
the following
on the 111004
level is higher "UL Levelfour
SDCCH, the BSC6900 determines
DL Quality conditions
Threshold for areSDCCH
met, theCall numberDrop". of
whether the uplink receive level is
Threshold for SET call drops
Finally, theon SDCCHlevel
downlink (receive
is lower
lower than this threshold. If the
SDDROPSTA SDCCH Call GCELLOTHE quality)
than "DLisLevel incremented
Threshold by for
one. GBFD-
uplink receive level is lower than
TDLQUAL Drop BSC6900 XT(Optional) First,
SDCCH theCalluplink quality level
Drop". 111004
this threshold and the TA is smaller
multiplied by 10 is higher than this
UL Level than the TA threshold of the
threshold. Second, the TA is
Threshold for SET serving cell, the number of call
smaller than the TA threshold of
SDDROPSTA SDCCH Call GCELLOTHE drops on SDCCH (receive level) is GBFD-
the serving cell. Third, the uplink
TULLEV Drop BSC6900 XT(Optional) incremented by one. 111004
level is higher than "UL Level
UL Quality Threshold for SDCCH Call Drop".
Threshold for SET Finally, the downlink level is lower
SDDROPSTA SDCCH Call GCELLOTHE than "DL Level Threshold for GBFD-
TULQUAL Drop BSC6900 XT(Optional) SDCCH Call Drop". 111004
SET Whether to allow SDCCH dynamic
SDCCH Dynamic GCELLBASIC allocation, that is, whether to allow
Allocation PARA(Option Whether to enable the
dynamic conversion SDCCH
between GBFD-
SDDYN Allowed BSC6900 al) quick
TCHs handover
and SDCCHs.test function. If this 113001
parameter is set to Yes, the
BSC6900 initiates intra-cell
SET
SDCCH handover as soon as the
MSP(Optional GBFD-
MSC issues an encrypted
SDENABLE SD Enable BSC6900 ) Enable SD 111701
command to the MS. Thus, the
forwarding encrypted signaling can
SET be transmitted and received on a
SDFASTHOS GCELLSOFT( new signaling channel. In this way, GBFD-
This parameter specifies whether
WITCH SD Quick HO BSC6900 Optional) the network security is improved. 113503
the BSC6900 automatically shuts
down the power amplifier of the
SET TRX to save power when the BTS
Shut Down GTRXDEV(O is powered by batteries after a GBFD-
After a new SDCCH is assigned to
SDFLAG Enabled BSC6900 ptional) power failure. 111605
an MS, the MS can be handed
over to another channel only if the GBFD-
SET time during which the MS occupies 110601
SDHOMININT Min Interval for GCELLHOCT the SDCCH is longer than the GBFD-
V SDCCH Hos BSC6900 RL(Optional) period specified by this parameter. 510501
SET
BSC Auto Link BTSOTHPAR GBFD-
SENDSAMBE Flag BSC6900 A(Optional) The time for BTS reset. 111612
SET Whether the BSC sends the
SENDSI2TER Send System OTHSOFTPA Whether the SI TypeType
System Information 3 message
2ter GBFD-
FLAG Information 2ter BSC6900 RA(Optional) contains
message.the 3G Early Classmark 111101
Sending Restriction field. The 3G
Early Classmark Sending
SET Whether the BSC sends the
Restriction field is used to notify
SENDSI5TER Send System OTHSOFTPA System Information Type 5ter GBFD-
the MS of whether the early
FLAG Information 5ter BSC6900 RA(Optional) message.
Whether 111101
classmarktomessage
enable the BTS tothe
contains
support
3G classmark message.between
the separation This
SET the physicalisand
parameter validlogical. Whether
for dual-mode
SendUtranEC Send 3G Class OTHSOFTPA the MSsBTSandsupports
is invalidthefor separate
single-mode GBFD-
SCFlag Flag BSC6900 RA(Optional) mode.
MSs. When a BTS is in separate 111101
mode, the physical boards are
separate from the logical TRXs,
SPT
that is, a physical board may exist
SEPARATEP Separate BTSRXUCHAI GBFD-
without being configured with any
OS Position BSC6900 N(Mandatory) Split position on the RXU chain 111202
logical TRX. When a BTS is in
non-separate mode, a one-to-one
mapping exists between the
SEPERATEM ADD physical board and the logical GBFD-
ODE Separate Mode BSC6900 BTS(Optional) TRX. 111202
Number of the command listening
The Command SET port of the server. You should not
SERCMDPO Port of FTP FTPSSRV(Ma use any port number occupied by GBFD-
RT Server BSC6900 ndatory) other applications. 111203
Number of the data port of the
The Source Date SET server in active mode. You should
SERDATAPO Port of FTP FTPSSRV(Ma not use any port number occupied GBFD-
RT Server BSC6900 ndatory) by other applications. 111203
ADD
BTSRETANT( Delivery serial number of the RET MRFD-
SERIALNO Device Serial No. BSC6900 Mandatory) antenna 210602
ADD
FTPSCLTDP
FTP Server IP ORT(Mandato IP address of the FTP server to be GBFD-
ServerIP Address BSC6900 ry) visited by the FTP client 111203
Configure ADD
Capacity<K User SGSNNODE( GBFD-
SGSNCAP Number> BSC6900 Optional) Available capacity of the SGSN 119701
ADD
SGSN(Manda MRFD-
SGSNNAME SGSN Name BSC6900 tory) Name of the SGSN 210301
ADD Length of the NRI or NULL-NRI.
GCNOPERAT Whether
The lengthto determines
enable the SGSN
the pool
SGSNNRILE SGSN NRI OR(Mandator function.
maximumWithvalueSGSN
of thepool,
NRI aand GBFD-
Special NRI. Each SGSN pool has
N Length BSC6900 y) BSC6900
NULL-NRI.is connected to multiple 119701
one NULL-NRI. When the NRI
SGSNs in the pool, and load
value in the TLLI of the MS
balancing and resource sharing
ADD uplink/downlink service data
between these SGSNs are
SGSNNULLN SGSN NullNRI GCNOPERAT equals NULL-NRI, the BSC6900 GBFD-
allowed. In this manner, the PS
RI Value BSC6900 OR(Optional) reselects an SGSN for the MS. 119701
services are processed by the
SGSNs in the SGSN pool in the
ADD most efficient way. This reduces
SGSNPOOLA GCNOPERAT inter-MSC handovers and node GBFD-
LLOW Allow SGSN Pool BSC6900 OR(Optional) redundancy backup. 119701
Administrative state of the SGSN.
The value "ALLOW" indicates that
the SGSN can handle the PS
services normally. The value
Protocol Version SET
"UNISTALL" indicates that the
Supported by GCELLPSBA Protocol version supported by the GBFD-
SGSN does not permit new PS
SGSNR SGSN BSC6900 SE(Optional) SGSN 114101
services to access the network and
the ongoing PS services are not
SGSN ADD affected. The value "DENY"
SGSNSTATU Management SGSNNODE( indicates that the SGSN denies all GBFD-
S Status BSC6900 Optional) PS services. 119701
Usage threshold of the CPU for
call access from other CPU. If the
SET usage of the CPU exceeds the
SHAREINCP Share in CPU BSCFCPARA( threshold, the call access request GBFD-
URATE Rate BSC6900 Optional) is discarded. 111705
ADD
ABISLOADSH
Load Sharing ARE(Mandato Slot number of the load sharing GBFD-
SHARESN Slot No. BSC6900 ry) interface board 111203
Whether the BSC sends a System
Information Type 2ter message to
SET a non-dualband cell. When the
SHARINGALL BTSSHARIN parameter is set to YES, the cell GBFD-
OW Sharing Allow BSC6900 G(Optional) Whether
does not to allow
send thesharing
System 118701
Information Type 2ter message if
SET the cell is not configured with inter-
ALMSHLD(Ma frequency neighboring cells. If the MRFD-
SHLDFLG Shield Flag BSC6900 ndatory) cell is configured
Shield flag of the with
alarminter- 210304
frequency neighboring cells, the
This parameter specifies the delay
cell sends the System Information
SHUTDOWN SET time before shutting down the
Type 2ter message. When the
TRXSTARTTI Shutdown TRX BTSBAKPWR TRXs when the BTS experiences a GBFD-
parameter is set to NO and "Send
ME Start Time[T2] BSC6900 (Optional) power failure. 111605
System Information 2ter " is set to
YES, the cell sends the System
SET Information Type 2ter message.
OTHSOFTPA Otherwise, the cell does not send GBFD-
SI2TerSwitch SI 2ter Switch BSC6900 RA(Optional) the message. 111101
GBFD-
SET 110601
SIGCHANHO SDCCH HO GCELLHOBA Whether to enable a handover GBFD-
EN Allowed BSC6900 SIC(Optional) between signaling channels 510501
ADD
MTP3RT(Man
ADD Number of times that the downlink
datory)
Signal Strength AISSCFG(Opt signal strength exceeds the GBFD-
ADD
SIGLAST Duration Times BSC6900 ional) threshold 118201
MTP3LKS(Ma
ADD
ndatory)
M3RT(Mandat
ADD
ory)
Signalling link set MTP3LNK(Ma Uniquely identifies a signaling link GBFD-
ADD
SIGLKSX index BSC6900 ndatory) set 111804
M3LKS(Mand
atory)
ADD
Signalling link set M3LNK(Mand Uniquely identifies a signaling link GBFD-
SIGLKSX index BSC6900 atory) set 111804
Signaling local weight over the
ADD
local NSVL. When this parameter
M3LNK(Mand ID of an M3UA link in the specified GBFD-
is set to a larger value, the NS is
SIGLNKID Signaling link ID BSC6900 atory) link set 118602
more likely to select this IP point
according to the load sharing
Signaling local weight over the
ADD function of the NSVC link of the IP
remote NSVL. When this
Signaling Load NSVLLOCAL( network if the NS sends a GBFD-
parameter is set to a larger value,
SIGLW Weight BSC6900 Optional) signaling message. 118603
the NS is more likely to select this
IP point according to the load
ADD sharing function of the NSVC link
Signaling Load NSVLREMOT of the IP network if the NS sends a GBFD-
SIGLW Weight BSC6900 E(Optional) signaling message. 118603
SET
Signal Service BSCSRVPRI( Priority of the signaling service.0 is GBFD-
SIGNALSP PRI BSC6900 Optional) the highest priority. 118605
ADD
Number of measurement reports
Signalling link MTP3LNK(Ma ID of an MTP3 link in a specified GBFD-
used for averaging the signal
SIGSLC code BSC6900 ndatory) link set 111804
strength of signaling channels.
This parameter helps avoid sharp GBFD-
SET drop of signal levels caused by 110601
SIGSTRFLTL Filter Length for GCELLHOFIT Raileigh fading and to ensure GBFD-
EN SDCCH Level BSC6900 PEN(Optional) correct handover decisions. 510501
Minimum interval between the
SET successful TBF establishment and
Interval Between BSCPSSOFT the first initiation of the Packet
SilenceTicksO Resource PARA(Option Timeslot Reconfiguration GBFD-
Single pass exclude MSISDN
fResReq Request BSC6900 al) procedure 119303
number 1. Certain numbers, such
as the premium rate number, are
Single Pass SET not used for the single pass check.
SinglePassEx Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
cludeMsisdn1 Number 1 BSC6900 ptional) string. 111203
number 10. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn1 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
0 Number 10 BSC6900 ptional) string. 111203
number 11. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn1 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
1 Number 11 BSC6900 ptional) string. 111203
Single pass exclude MSISDN
number 12. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn1 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
2 Number 12 BSC6900 ptional) string. 111203
number 13. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn1 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
3 Number 13 BSC6900 ptional) string. 111203
number 14. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn1 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
4 Number 14 BSC6900 ptional) string. 111203
number 15. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn1 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
5 Number 15 BSC6900 ptional) string. 111203
number 16. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn1 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
6 Number 16 BSC6900 ptional) string. 111203
number 17. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn1 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
7 Number 17 BSC6900 ptional) string. 111203
number 18. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn1 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
8 Number 18 BSC6900 ptional) string. 111203
number 19. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn1 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
9 Number 19 BSC6900 ptional) string. 111203
number 2. Certain numbers, such
as the premium rate number, are
Single Pass SET not used for the single pass check.
SinglePassEx Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
cludeMsisdn2 Number 2 BSC6900 ptional) string. 111203
number 20. Certain numbers, such
as the premium rate number, are
SinglePassEx Single Pass SET not used for the single pass check.
cludeMsisdn2 Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
0 Number 20 BSC6900 ptional) string. 111203
number 3. Certain numbers, such
as the premium rate number, are
Single Pass SET not used for the single pass check.
SinglePassEx Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
cludeMsisdn3 Number 3 BSC6900 ptional) string. 111203
number 4. Certain numbers, such
as the premium rate number, are
Single Pass SET not used for the single pass check.
SinglePassEx Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
cludeMsisdn4 Number 4 BSC6900 ptional) string. 111203
Single pass exclude MSISDN
number 5. Certain numbers, such
as the premium rate number, are
Single Pass SET not used for the single pass check.
SinglePassEx Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
cludeMsisdn5 Number 5 BSC6900 ptional) string. 111203
number 6. Certain numbers, such
as the premium rate number, are
Single Pass SET not used for the single pass check.
SinglePassEx Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
cludeMsisdn6 Number 6 BSC6900 ptional) string. 111203
number 7. Certain numbers, such
as the premium rate number, are
Single Pass SET not used for the single pass check.
SinglePassEx Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
cludeMsisdn7 Number 7 BSC6900 ptional) string. 111203
number 8. Certain numbers, such
as the premium rate number, are
Single Pass SET not used for the single pass check.
SinglePassEx Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
Single pass exclude MSISDN
cludeMsisdn8 Number 8 BSC6900 ptional) string. 111203
number 9. Certain numbers, such
as the premium rate number, are
Single Pass SET not used for the single pass check.
SinglePassEx Exclude Msisdn BSCBASIC(O The number is stored in character GBFD-
cludeMsisdn9 Number 9 BSC6900 ptional) string. 111203
Source IP PING
SIPADDR address BSC6900 IP(Mandatory) Source IP address None
TRC
Source IP IPADDR(Optio
SIPADDR address BSC6900 nal) Source IP address None
COL
LOG(Optional Log of which site need to be GBFD-
SITES Sites BSC6900 ) collected. 111203
Zone where the BTS synchronizes
with othertype.
Self-loop BTSs. Only
The two BTSsare
precautions
SET with the same
as follows: synchronization
SITESYNCZO BTSAISS(Ma zone canself-loop
1. If the be synchronized
type is setintoa GBFD-
NE Site Sync Zone BSC6900 ndatory) synchronization task.
"E1SELFLOOP" and the BTS type 118201
SET is
The BTS3002C,
IP addressBTS3001C, or
must be a valid
BTSIPCLKPA BTS3001CP,
class A, B, or the transmission
C address, and it
SLAVEIPADD Clock Server IP RA(Mandatory board
cannottype
be acan be set to
broadcast only or
address GBFD-
R Address 2 BSC6900 ) "Active
networkTMU/MMU/IOMU/DOMU".
address. 118606
If the BTS type is BTS3006C or
ADD
BTS3002E, the transmission board
BTSBINDLOC No. of the location group under the
type cannot be set to
SLAVELOCG Sub-Location GRP(Mandato BTS. The location group No. is GBFD-
"Active/Standby TMU".
RPNO Group No. BSC6900 ry) unique for each BTS. 510104
2. If the self-loop type is set to
STR "IASUSELFLOOP" and the BTS
TRANSPERF type is BTS3002C, the
TST(Mandator transmission board type can be set GBFD-
SLPTYPE Self Loop Type BSC6900 y) to only "Active DOMU". 111207
SET maximum number (2) of routes for
DPUBRDTYP the load sharing. For example,
E(Mandatory) B0000 indicates that up to one
SET route is used for the load sharing,
TCTYPE(Man B0001 and B1000 indicate that up
datory) to two routes are used for the load
ADD sharing. The additional routes are
BRD(Mandato not used for the load sharing. The
ry)
ADD AND operation between this value
Signalling route LOD
N7DPC(Optio and " signaling link mask " in the GBFD-
SLSMASK mask BSC6900 BRD(Optional
nal) link set is equal to 0. 111804
)
SYN If no handshake message is
Type of the start date. "WEEK"
SET
BRDAREA(O received from the peer within the
indicates that the start date is a
SLVSERVAC Slave Service GBSCREDGR
ptional) delay, the slave service is GBFD-
weekday. "DATE" indicates that the
TDELAY Active Delay BSC6900 P(Optional)
CMP activated. 113725
start date is a month day.
TBLDATA(Ma "DATEWEEK" indicates the start
ndatory)
SET date is expressed by a
SET
TZ(Mandatory combination of weekday and MRFD-
SM StartType BSC6900 MSPCMD(Ma
) month day. 210301
ndatory)
SET
ADD
MSP(Mandato
GEXTSMLC(
ry)
SMLCIDX SMLC Index BSC6900 Mandatory)
SET Index of the SMLC None
BFDPROTOS
W(Mandatory)
ADD
STR
GEXTSMLC( Whether the built-in SMLC or
SMLCMode SMLC Mode BSC6900 FRPORTLOO
Mandatory) external SMLC is used in the BSS. None
P(Mandatory)
ADD
ADD
BC(Mandatory
SMOKE_MAS Enable Smoke EMU(Optional
) MRFD-
K Alarm Reporting BSC6900 )ADD Smog alarm switch 210304
NSVC(Mandat
ory)
SET
ADD
TZ(Mandatory MRFD-
SET
SMONTH Start month BSC6900 NSVLLOCAL(
) Month in which DST starts 210301
FCCPUTHD(
Mandatory)
Optional) Number of CPU usage samples
SET
SET involved in the calculation of the
PSCELLTOD
FCMSGQTHD average CPU usage in the sliding WRFD-
SP(Mandatory
SMWINDOW Filter window BSC6900 (Optional) window 040100
)
ADD
BTSAUTOPL
AN(Mandatory MRFD-
SN Slot No. BSC6900 ) Number of the slot 210301
DLD
TCFILE(Mand MRFD-
ADD
SN Slot No. BSC6900 atory) Number of the slot 210301
MTP3LNK(Op
tional)
ADD
SCTPLNK(Ma Number of the slot where the XPU
SN Slot No. BSC6900 ndatory) board is located None
ADD
M3LNK(Mand Number of the slot where the XPU GBFD-
SN Slot No. BSC6900 atory) board is located 118602
PORT(Mandat
datory)
ory)
PING
SET
MAC(Mandato
PHBMAP(Ma
BTSANTFEE
ry)
ndatory)
DERCONNEC
STR
ADD
T(Mandatory)
ETHOAMLOO
ATERE1T1(M
ADD
PTST(Mandat
andatory)
BTSOBJALM
ory)
ADD
SHLD(Mandat
TRC
AE1T1(Manda
ory)
MAC(Mandato
SN Slot No BSC6900 tory)
LOD
ry) Number of the slot None
RETANTCFG(
ADD
Mandatory)
ETHTRK(Man
BLK A key field used to identify the Ater
SET
datory)
ATERE1T1(M timeslot and indicate the number of
BLK
BTSANTANG
ADD
SN BM Slot No BSC6900 andatory) the Ater interface timeslot None
AE1T1(Manda
LE(Mandatory
ETHTRKLNK(
)tory)
Mandatory)
ADD
SET
ADD
PBE1T1(Man
BTSCLKPAR
ETHTRKIP(M GBFD-
EXP
SN Slot No. BSC6900 datory)
A(Mandatory)
andatory) Number of the slot 111203
ALMLOG(Opti
SET
STR
onal)
BTSCAVFRQ(
ETHMIRROR
STA
Mandatory)
PORT(Mandat
ALMLOG(Opti Number of the slot where the MRFD-
SN Slot No. BSC6900 SET
ory)
onal) alarm is generated 210304
BTSPMUDEF
BLK
(Mandatory) Number of the slot where the
BC(Mandatory
ADD
SET alarm is generated, the number of
)
OBJALMSHL
BTSTMA(Man the slot where the OMU board is MRFD-
CHK
SN Slot No. BSC6900 D(Optional)
datory) positioned is not supported 210304
E1T1CRS(Ma
SET
ndatory)
RETANTENB(
SET
Mandatory)
BTSIP(Manda Indicates the slot number for
SWP
STR
SN Slot No. BSC6900 tory) running this command None
ETHPORT(Ma
BTSBATTTST
ADD
ndatory)
(Mandatory)
GCBSADDR(
ADD
STR
Mandatory)
Main Board Logic ETHREDPOR
RETANTSCA Slot number for running this
SET
SN slot No. BSC6900 T(Mandatory)
N(Mandatory) command None
TCPLYVOICE
STR
(Mandatory)
TRANSPERF
SET Number of the slot. The subrack
TST(Optional)
TCPARA(Man number and slot number uniquely MRFD-
SN Slot No. BSC6900 SWP
datory) identify a board. 210301
BTSBRD(Man
datory)
ADD Slot No. of the subsystem where
SET
GIURGCONN the Iur-g common connection is MRFD-
BTSENVALM(
SN Slot No. BSC6900 (Mandatory) established 211402
Mandatory)
CHG
BTSPTUSHK
TM(Mandator Number of the slot where the BTS GBFD-
ADD
SN Slot No. BSC6900 y) board is located 111202
BTSBFD(Opti
onal)
ADD
BTSIPRTBIN Number of the slot where the BTS GBFD-
SN Slot No. BSC6900 D(Optional) board is located 118609
ADD
NSE(Mandato Slot number of the XPU board MRFD-
SN Slot No. BSC6900 ry) bound to the NSE 210301
ADD
BTSPPPLNK(
Optional)
ADD
BTSMPLNK(
Optional)
ADD
BTSETHMA(
ADD
Optional)
PBSL(Mandat Slot number
RF send modeof board to which Pb GBFD-
of the TRX.
ADD
SN Slot No. BSC6900 ory) signaling
The BTS3006C and BTS3002E do 111203
link belongs
BTSETHLCM
EP(Optional) not support Wide Band Combining,
ADD Power Booster Technology, DPBT,
BTSTOPCON or Transmitter
Number of the Independent orport
slot where the GBFD-
SN Port Slot No. BSC6900 FIG(Optional)Combining.
is located 111202
The DBS3900 GSM GRRU does
not support Wide Band Combining,
ADD
Transmitter Independent or
BTSCONNEC Slot number of the BSC6900 board GBFD-
Combining, Power Booster
SN Slot No. BSC6900 T(Mandatory) that is connected to the BTS 111202
Technology, or DPBT.
The BTS3900 GSM and
SET BTS3900A GSM do not support
GTRXDEV(O Transmitter Independent or Wide MRFD-
SNDMD Send Mode BSC6900 ptional) Band Combining. 210301
SET
DRRU Sending BTSRXUBP( The connection mode between the GBFD-
SndRcvMode Receiving Mode BSC6900 Optional) DRRU and the antenna. 111202
SET
SndRcvMode DRFU Sending BTSRXUBP( The connection mode between the GBFD-
1 Receiving Mode BSC6900 Optional) DRFU and the antenna. 111202
MRRU/GRRU SET
SndRcvMode Sending BTSRXUBP( The connection mode between the GBFD-
2 Receiving Mode BSC6900 Optional) MRRU/GRRU and the antenna. 111202
MRFU/GRFU SET
SndRcvMode Sending BTSRXUBP( The connection mode between the GBFD-
3 Receiving Mode BSC6900 Optional) MRFU/GRFU and the antenna. 111202
BTS3900E SET
SndRcvMode Sending BTSRXUBP( The connection mode between the GBFD-
4 Receiving Mode BSC6900 Optional) BTS3900E and the antenna. 111202
SET
SNTPCLTPAR Synchronization period of the GBFD-
As an integer, the OSP code can
SP Sync Period BSC6900 A(Mandatory) SNTP client service 111203
be expressed by a decimal digit or
a hexadecimal digit. If the OSP
ADD code is expressed by a
OSP code[Whole OPC(Optional hexadecimal digit, H' is added GBFD-
SPC Number] BSC6900 ) before the number. 111804
ADD
OPC(Mandato Number of bits contained in the GBFD-
SPCBITS OSP code bits BSC6900 ry) signaling point code 111804
does not meet the requirements.
The binary number of value 5 in
the first segment is 101, which is of
three bits. Thus, you need not to fill
0s into the first segment. The
binary number of value 7 in the
second segment is 111. As
previously stated, when the
OSP ADD signaling point code bits parameter
code[Divided OPC(Optional is
OSPset code
to "BIT14", eightinbits
expressed themust
formbeof GBFD-
SPCDNF Number] BSC6900 ) included
segmentsin8-8-8the second segment. 111804
Thus, the second segment is put
as 00000111. Accordingly, you can
ADD
calcuate the binary number of the
PBE1T1(Man Start CIC of the E1/T1 of the Pb GBFD-
ADD value in the third segment. The
SPCIC Start PCIC BSC6900 datory) interface 111203
OPC(Optional binary number of 5-7-2 is 101
) The value 010.
00000111 of this parameter
ADD consists
2. Convert of this
seven bits.number
binary Each bitto a
This parameter is used for load
Signal point data N7DPC(Optio determines
decimal number. whether
Thetodecimal
enable form
the GBFD-
control. It determines whether the
SPDF format BSC6900 nal) one-way Boolean
of this binary alarm.
number "0"
is 10,298. 111804
users of special access class are
indicates that the one-way Boolean
The value
allowed to of this parameter
access the network.
alarm is enabled, and "1" indicates
SET consists of five bits.
Value 1 indicates thatEach bit is not
access
that the one-way Boolean alarm is
Special Access GCELLCCBA determines
allowed. Value whether the one-way
0 indicates that GBFD-
disabled.
SPECACC Control Class BSC6900 SIC(Optional) Boolean
access isalarm is triggered by low
allowed. 111003
In multi-mode scenario, the value
level or high level. "0" indicates
of this parameter in one mode
that the alarm is triggered by high
SET must be the same as the value of
level, and "1" indicates that the
SPECIALSWI Special Alarm BTSFMUABP( the corresponding parameter in MRFD-
alarm is triggered by low level.
TCH Switch BSC6900 Optional) another mode. 210304
In multi-mode scenario, the value
of this parameter in one mode
SPECIALSWI Special Alarm SET must be the same as the value of
TCHERLEVE Valid Level BTSFMUABP( the corresponding parameter in MRFD-
L Configuration BSC6900 Optional) another mode. 210304
ADD
SRC3GNCEL Source Cell G3GNCELL( The batch file to be executed: The MRFD-
LNAME Name BSC6900 Mandatory) content
Name ofofa the batch
source file consists of
cell 210301
service commands to be executed
in batches. The source file is
ADD
located in the FTP subdirectory of
G2GNCELL( MRFD-
the OMU installation directory, and
SRCCI Source Cell CI BSC6900 Mandatory) Source cell ID 210301
you should not add the path when
entering the name. The characters
RUN (@, #, !, %, ^, &, *, /, ., [, ], \, :, ?, ',
Source File BATCHFILE( ", <, >, and |) cannot appear in the GBFD-
SRCF Name BSC6900 Mandatory) file name. 111203
SET
Clock source CLKMODE(M MRFD-
SRCGRD priority BSC6900 andatory) Priority of the clock source 210502
Whether the currently used GBFD-
Current HO ADD handover algorithm in the source 110601
SRCHOCTRL CTRL Algorithm G2GNCELL(O cell is HO Algorithm I or HO GBFD-
SWITCH in Source Cell BSC6900 ptional) Algorithm II 510501
ADD
Source IP BTSBFD(Man Source IP address of BFD GBFD-
SRCIP Address BSC6900 datory) Session. 118609
ADD
G2GNCELL( Local area code (LAC) of the MRFD-
SRCLAC Source Cell LAC BSC6900 Mandatory) source cell 210301
ADD
G2GNCELL( Mobile country code (MCC) of the MRFD-
SRCMCC Source Cell MCC BSC6900 Mandatory) source cell 210301
SET
BFDPROTOS
W(Mandatory)
STR
FRPORTLOO
PING
P(Mandatory)
MAC(Mandato
BLK
ry)
BC(Mandatory
TRC
)
MAC(Mandato
SET Identifies a maintenance point in
SRCMEPID MEP ID BSC6900 ry)
TRANSPATC the maintenance group None
HPARA(Mand
atory)
ADD
CHK
G2GNCELL( Mobile network code (MNC) of the MRFD-
SRCMNC Source Cell MNC BSC6900 E1T1CRS(Ma
Mandatory) source cell 210301
ndatory)
ADD
ADD
BC(Mandatory
TSCROSS(M
)
SRCPORTNO Source port No. BSC6900 andatory)
ADD Source of timeslot cross None
NSVC(Mandat
ory)
ADD
Clock source ADD
CLKSRC(Man MRFD-
SRCT type BSC6900 NSVLLOCAL(
datory) Type of the clock source. 210502
Mandatory)
ADD
SET
RSCGRP(Ma
ADD
PSCELLTOD
ndatory)
Source timeslot TSCROSS(M
SP(Mandatory
SET
SRCTSMASK mask BSC6900 andatory) Source timeslot mask None
)PHBMAP(Ma
ADD
ndatory)
BTSAUTOPL
ADD
AN(Mandatory
ATERE1T1(M MRFD-
ADD
SRN Subrack No. BSC6900 )andatory) Number of the subrack 210301
SUBRACK(M
ADD
andatory)
AE1T1(Manda
SET
tory)
CLK(Mandato MRFD-
ADD
SRN Subrack No. BSC6900 BLK
ry) Number of the subrack 210301
MTP3LNK(Op
AE1T1(Manda
tional)
tory)
ADD
ADD
SCTPLNK(Ma Number of the subrack where the
ABISLOADSH
SRN Subrack No. BSC6900 ndatory) XPU board is located None
ARE(Mandato
ry)
ADD
PBE1T1(Man
SRN Subrack No. BSC6900 datory) Number of the subrack None
ADD
M3LNK(Mand GBFD-
SRN Subrack No. BSC6900 atory) Number of the subrack 118602
It is one key field of identifying the
BLK Ater timeslot and indicates the
ATERE1T1(M subrack No. of the Ater interface
SRN BM Subrack No BSC6900 andatory) timeslot. None
COL
LOG(Optional
SRN Subrack No. BSC6900 ) Number of the subrack. None
Mandatory)
ETHMD(Mand
SET
atory)
BTSPMUDEF
EXP
ADD
(Mandatory)
ALMLOG(Opti
ETHTRK(Man
SET
onal)
datory)
BTSTMA(Man
STA
ADD
datory)
ALMLOG(Opti
ETHTRKLNK(
SET
onal)
Mandatory)
RETANTENB(
ADD Number of the subrack where the
ADD
Mandatory)
OBJALMSHL indicator alarm to be queried is MRFD-
ETHTRKIP(M
STR
SRN Subrack No. BSC6900 D(Mandatory) generated 210304
andatory)
BTSBATTTST
ADD
STR
(Mandatory)
GCBSADDR(
ETHMIRROR
STR
Mandatory)
PORT(Mandat
RETANTSCA The subrack number for running
SET
SRN Subrack No. BSC6900 ory)
N(Mandatory) this command None
TCPLYVOICE
STR
(Mandatory)
TRANSPERF
SET
TST(Optional)
TCPARA(Man The subrack number uniquely MRFD-
SRN Subrack No. BSC6900 SWP
datory) identifies a subrack. 210301
ADD
BTSBRD(Man
BTSSFPMOD
datory)
ADD
E(Optional) Subrack No. of the subsystem
SET
GIURGCONN
SET where the Iur-g common MRFD-
BTSENVALM(
SRN Subrack No. BSC6900 (Mandatory)
BTSFORBIDT connection is established 211402
Mandatory)
S(Optional)
CHG
SET
BTSPTUSHK
BTSOMLTS(O
TM(Mandator Number of the subrack where the GBFD-
ADD
ptional)
SRN Subrack No. BSC6900 y) BTS board is located 111202
BTSBFD(Opti
SET
onal)
BTSETHPOR
ADD
T(Optional)
BTSIPRTBIN
ADD Number of the subrack where the GBFD-
SRN Subrack No. BSC6900 D(Optional)
BTSPPPLNK( BTS board is located 118609
Optional)
ADD
BTSMPLNK(
NSE(Mandato Subrack number of the XPU board MRFD-
SRN Subrack No. BSC6900 Optional)
ry) bound to the NSE 210301
ADD
BTSETHMA(
ADD
Optional)
PBSL(Mandat Subrack number of board to which GBFD-
ADD
SRN Subrack No. BSC6900 ory) Pb signaling link belongs 111203
BTSETHLCM
EP(Optional)
ADD
BTSTOPCON Number of the subrack where the GBFD-
SRN Port Subrack No. BSC6900 FIG(Optional) port is located 111202
ADD
BTSCONNEC Subrack number of the BSC6900 GBFD-
SRN Subrack No. BSC6900 T(Mandatory) board that is connected to the BTS 111202
SET
BTSTMA(Man GBFD-
SRNO Tributary No. BSC6900 datory) Number of the tributary 111202
SET
CLK(Mandato MRFD-
SRT Subrack type BSC6900 ry) Type of the subrack 210502
SET
TZ(Mandatory MRFD-
ST StartTime BSC6900 ) Start of DST 210301
The operation time of the log GBFD-
EXP record should be after this time. If 111203
LOG(Optional this parameter is not specified, the MRFD-
ST Start Time BSC6900 ) start time is not limited. 210305
If the time mode is set to
ADD "DAILY_T", "WEEKLY_T", or
SUBTSK(Man "MONTHLY_T", you should set this GBFD-
ST Start Time BSC6900 datory) parameter. 111203
The operation time of the log GBFD-
COL record should be after this time. If 111203
LOG(Optional this parameter is not specified, the MRFD-
ST Start Time BSC6900 ) start time is not limited. 210305
EXP
ALMLOG(Opti Start time of the alarm record. By MRFD-
ST Start Time BSC6900 onal) default, the start time is 00:00:00. 210304
STA
ALMLOG(Opti Start time of the alarm record. By MRFD-
ST Start Time BSC6900 onal) default, the start time is 00:00:00. 210304
BLK
ATERE1T1(M It indicates the start CIC of the Ater GBFD-
It indicates the start CIC of the A
STARTTS Start TS BSC6900 andatory) interface CIC segment. 111801
interface CIC segment. When
Whether
Operationtomode
enable the to
is set smart
subrack
BLK temperature
number, slot control
number,mechanism of
port number,
AE1T1(Manda the FMUA.
or CIC, the Smart temperature
parameter is GBFD-
STARTTS Start TS BSC6900 tory) control refers to the mechanism
mandatory. 111803
adopted by the FMUA to adjust the
fan speed, and thus to regulate the
SET
temperature according to the
Start Timeslot BTSFORBIDT GBFD-
environment temperature.
STARTTS No. BSC6900 S(Mandatory) Number of the start timeslot 111202
In multi-mode scenario, the value
of this parameter in one mode
Whether to enable the smart
Smart SET must be the same as the value of
temperature control mechanism of
Temperature BTSFMUABP( Number of the startparameter
the corresponding CIC. The C/C
in GBFD-
the NFCB. Smart temperature
STC Control BSC6900 Optional) of each E1/T1
another mode. timeslot can be 111202
control refers to the mechanism
calculated on the basis of this
adopted by the NFCB to adjust the
parameter. Assume that the start
Smart SET fan speed, and thus to regulate the
CIC is 100, the CIC of the E1
Temperature BTSNFCBBP( temperature according to the GBFD-
timeslots on the A interface will
STC Control BSC6900 Optional) environment temperature. 111202
automatically be set to 100, 101,
102, 103, and so on. Assume that
ADD the CIC of an E1 timeslot is 65535,
AE1T1(Manda the CICs of all successive E1 GBFD-
STCIC Start CIC BSC6900 tory) timeslots are all 65535. 111803
ADD
Out Port Cabinet BTSMONITO Number of the cabinet where the GBFD-
STCN No. BSC6900 RTS(Optional) outgoing port of the BTS is located 111202
GBFD-
ADD 111203
OP(Mandator Start date. The input format is MRFD-
STD Start Date BSC6900 y) YYYY&MM&DD. 210305
Number of frequencies measured
STR in each group (excluding the
Measurement NCS(Mandato frequencies in the original BA GBFD-
STEP Step BSC6900 ry) table). 510901
ADD
MTP3LNK(Op GBFD-
STFLG Satellite flag BSC6900 tional) Satellite flag 111804
STR
BTSLOG(Opti GBFD-
STIME Start Time BSC6900 onal) Start time 111202
SET
STIRCALLO GCELLSOFT( Whether to enable the EICC GBFD-
This parameter specifies whether
WED EICC Allowed BSC6900 Optional) algorithm 115821
the sending of system information
5, 5bis, and 5ter can be stopped
Stop Send SI SET on the SACCH on the SDCCH
STOPSI5SWI 5/5bis/5ter after GCELLSOFT( after the BTS issues a ciphering GBFD-
Time for which the BTS waits to
TCH Encrypt BSC6900 Optional) command. 113521
stop the fallback function after the
OML is set up. With this parameter,
SET the BTS does not stop the fallback
Fallback Stop BTSFALLBAC function when the OML is set up GBFD-
STOPTIME Time BSC6900 K(Optional) transiently. 510309
ADD
BTSMONITO Number of the slot where the GBFD-
STSN Out Port Slot No. BSC6900 RTS(Optional) outgoing port of the BTS is located 111202
ADD
Out Port Subrack BTSMONITO Number of the subrack where the GBFD-
STSRN No. BSC6900 RTS(Optional) outgoing port of the BTS is located 111202
ADD
BTSMONITO
Out-BTS Sub RTS(Mandato Number of the sub-timeslot on the GBFD-
STSUBTS Timeslot No. BSC6900 ry) outgoing port of the BTS 111202
GBFD-
ADD 111203
OP(Mandator Start time. The input format is MRFD-
STT Start Time BSC6900 y) HH&MM&SS. 210305
ADD
BTSMONITO
Out-BTS RTS(Mandato Number of the timeslot on the GBFD-
STTS Timeslot No. BSC6900 ry) outgoing port of the BTS 111202
SET
BTSAUTODL
DACTINFO(O GBFD-
STTYPE BTS Type BSC6900 ptional) Type of the BTS. 111202
SET
SUBNET(Man
SUBNET Subnet No. BSC6900 datory) subnet No. in a BSC. None
Sublink
Resources SET This parameter specifies whether
SUBRESPRE Preemption GCELLSOFT( the CS services preempt the GBFD-
EMPTFLG Switch BSC6900 Optional) sublink resources of PS services. 117301
SET Whether to allow the CS services
BTSFLEXABI to preempt the sublink resources
SUBRESPRE Sub Res SPARA(Optio of PS services when the Abis GBFD-
EMPTFLG Preempt Flag BSC6900 nal) resources are congested 117301
SET
BTSOMLTS(M Number of the sub-timeslot on the GBFD-
SUBTS Sub Timeslot No. BSC6900 andatory) port 111203
Whether the CIC circuits in use on
the A interface can be assigned.
When this parameter is set to YES
and the MSC assigns new calls to
an ongoing A interface circuit, the
SET
original calls (that are occupying
BTSAUTODL Sub-version No. of the TMU board.
the circuit) are released, and the
Sub-Version DACTINFO(M It is configured according to the GBFD-
circuit is used by the new calls.
SubVer No.of TMU BSC6900 andatory) actual situation. 111202
When this parameter is set to NO
and the MSC assigns new calls to
SET the ongoing A interface circuit, the
SupportApply Support Apply OTHSOFTPA new calls are rejected, and the GBFD-
UsedCic Used A Cic BSC6900 RA(Optional) original calls are not affected. 111803
SUPPORTBA Use Back-up port SET Whether to use Back-up port for MRFD-
KCLK2SRC for LINE2 BSC6900 CLK(Optional) LINE2 210502
SUPPORTBA Use Back-up port SET Whether to use Back-up port for MRFD-
KCLKSRC for LINE1 BSC6900 CLK(Optional) LINE1 210502
SUPPORTCE SET
LLBROADCA Support Cell GCELLSBC(O Whether to support the broadcast GBFD-
ST Broadcast Name BSC6900 ptional) of the cell name 113602
SET
BSCPSSOFT
Whether to support dual transfer
SUPPORTDL Support High PARA(OptionWhether to support the high GBFD-
mode (DTM). The DTM allows an
5TS Multislot Class BSC6900 al) multislot class 119402
MS to use the circuit switching
service and the packet switching
SET service at the same time. This
SUPPORTDT GCELLGPRS( function must be supported by the GBFD-
M Support DTM BSC6900 Optional) network side. 114151
SET
BSCPSSOFT
SUPPORTED PARA(Option GBFD-
Whether to support the enhanced
A Support EDA BSC6900 al) Whether to support EDA 119401
DTM
Whether function. Comparing
to support the celltolist
thein
DTM, the enhanced
the common DTM improves
measurement
SET the CS setup
messages and
over therelease. During
Iur-g interface.
SUPPORTEN Support GCELLGPRS( the CS service setup, the PS
When this parameter is set to YES, GBFD-
DTM Enhanced DTM BSC6900 Optional) service
the localisBSC
not interrupted.
can handle the load 114151
information of the cells in the cell
Support FE/GE SET list carried in the received common
SupportIpSpa SPAN BTS Local BSSLS(Optio measurement
Whether the FE/GE messages. In
BTS supports GBFD-
nBtsLSwitch Switch BSC6900 nal) addition,
inter-BTSthe BSC
local can carry the
switching 117702
Support intracell handover to
load information of the cells in the
change the active speech version,
cell list in the sent common
SET then can increase the usage of
measurement messages, such as
SupportTFOC Support TFO BSCBASIC(O TFO(Tandem Free Operation) to GBFD-
the common measurement report,
odecOptimize Codec Optimize BSC6900 ptional) improve the speech quality. 115701
common measurement
initialization response, common
ADD measurement initialization failure,
GNRNC(Optio and common measurement failure MRFD-
SupptCellList SupptCellList BSC6900 nal) indication. 211404
Minimum timeslots between two
successive channel requests. After
sending the access request, if the
MS does not receive the response
message after waiting for the
SET minimum timeslots between two
GCELLPRAC successive channel requests, the GBFD-
SVALUE S Value BSC6900 H(Optional) MS resends the access request. 119110
SET
ALMPORT(Op Operating state of the environment MRFD-
SW Switch BSC6900 tional) alarm port 210304
If this parameter is set to "ON",
you must set "OMU automatic
OMU Automatic SET switchover interval". Otherwise,
switch for authenticating objects.
Switchover ASWPARA(M "OMU automatic switchover GBFD-
When the switch is enabled, the
SW Switch BSC6900 andatory) interval" is not displayed. 111203
BSC system authenticates the
BTS objects of the user; when the
SET switch is disabled, the BSC system
OBJAUTHSW does not authenticate the BTS GBFD-
SW Switch BSC6900 (Mandatory) objects. 111203
SET
BTSENVALM
PORT(Mandat GBFD-
SW Switch BSC6900 ory) Whether to enable the alarm port 111202
SET
TZ(Mandatory MRFD-
SWEEK Start week BSC6900 ) Weekday on which DST starts 210301
SET
SCUPORT(M MRFD-
Switch Port switch BSC6900 andatory) State of the panel port switch 210301
SET
Self-healing SLFSLVSW(M
SWITCH Switch BSC6900 andatory) Switch for the OMU self-healing None
SET
Bfd Protocol BFDPROTOS Turn on or turn off the BFD GBFD-
SWITCH Switch BSC6900 W(Mandatory) protocol switch 118609
Whether to enable the board
parameters to be configured. If this
parameter is set to "YES", the user
Alarm Parameter SET can set board parameters of the
Configuration BTSALMPOR BTS. Otherwise, the user cannot GBFD-
GBFD-
SWITCH Enabled BSC6900 T(Mandatory) set the board parameters. 111202
115501
GBFD-
SET 115502
BTSETHPOR Whether to enable the 3ah GBFD-
SWITCH3AH 3ah Switch BSC6900 T(Optional) function on the BTS port. 115701
CMP
Synchronization BRDAREA(O MRFD-
SYNFLAG flag. BSC6900 ptional) Automatic synchronization flag 210401
SET
Clock BTSIPCLKPA
Synchronization RA(Mandatory Synchronization mode of the IP GBFD-
SYNMODE Mode BSC6900 ) clock 118606
Interim synchronization period (in
SET days). The BTS can re-initiate the
SYNTIMEDA Days of Inter BTSIPCLKPA synchronization only after the GBFD-
Y Sync Period BSC6900 RA(Optional) period. 118606
Interim synchronization period (in
SET hours). The BTS can re-initiate the
SYNTIMEHO Hours of Inter BTSIPCLKPA synchronization only after the GBFD-
UR Sync Period BSC6900 RA(Optional) period. 118606
Interim synchronization period (in
SET minutes). The BTS can re-initiate
Minutes of Inter BTSIPCLKPA the synchronization only after the GBFD-
SYNTIMEMIN Sync Period BSC6900 RA(Optional) period. 118606
SYSCONTAC Contact mode of SET Contact way of the Base Station MRFD-
T the manufacturer BSC6900 SYS(Optional) Controller supplier 210301
CHG
BTSPTUSHK Value of the first timer for the PTU GBFD-
T1 Time1 BSC6900 TM(Optional) handshake 118601
When the reception of a TFP
causes unavailability of a route,
SET this timer is started to regularly
Signalling route MTP3TMR(O check whether the route is GBFD-
This timer is a protection timer
T10TMR set test timer BSC6900 ptional) recovered. 111804
waiting for an uninhibit
acknowledgement message (LUA)
SET from the peer end after an uninhibit
Uninhibit ACK MTP3TMR(O message (LUN) is sent to the peer GBFD-
T12TMR timer BSC6900 ptional) end. 111804
This timer is a protection timer
waiting for a force uninhibit
acknowledgement message (LUA)
SET from the peer end after a force
Force uninhibit MTP3TMR(O uninhibit message (LFU) is sent to GBFD-
This timer is a protection timer
T13TMR timer BSC6900 ptional) the peer end. 111804
waiting for an inhibition
acknowledgement message (LIA)
SET from the peer end after an
Inhibition ACK MTP3TMR(O inhibition message (LIN) is sent to GBFD-
T14TMR timer BSC6900 ptional) the peer end. 111804
This timer is started when a link
SET fails to be started. The restart of
Link realignment MTP3TMR(O the link is initiated after this timer GBFD-
T17TMR timer BSC6900 ptional) expires. 111804
When a normal changeover cannot
be initiated, services will be
SET changed over to an alternative link
Time-control MTP3TMR(O after this timer expires to avoid GBFD-
T1TMR changeover timer BSC6900 ptional) disorder of data. 111804
CHG
BTSPTUSHK Value of the second timer for the GBFD-
Timer in the LAPD protocol. The
T2 Time2 BSC6900 TM(Optional) PTU handshake 118601
value of the timer indicates the
time when the LAPD link waits for
SET the response or acknowledgement
This parameter specifies the expiry
BTSRINGATT frame after sending the command GBFD-
value of timer T200 used for the
T200 T200 BSC6900 R(Optional) frame. 117801
FACCH/TCHF over the Um
interface. For the function of timer
SET T200 and the effect of the
This parameter specifies the expiry
GCELLCCTM parameter, see the description of GBFD-
value of timer T200 used for the
T200FACCHF T200 FACCH/F BSC6900 R(Optional) "T200 SDCCH". 111002
FACCH/TCHH over the Um
interface. For the function of timer
This parameter specifies the expiry
SET T200 and the effect of the
value of timer T200 used for the
GCELLCCTM parameter, see the description of GBFD-
SACCH over the Um interface
T200FACCHH T200 FACCH/H BSC6900 R(Optional) "T200 SDCCH". 111002
when the TCH supports SAPI3
services. For the function of timer
SET T200 and the effect of the
T200 SACCH GCELLCCTM parameter, see the description of GBFD-
This parameter specifies the expiry
T200SACCH3 TCH SAPI3 BSC6900 R(Optional) "T200 SDCCH". 111002
value of timer T200 used for the
SACCH on the SDCCH.
This parameter specifies the expiry
SET For the function of timer T200 and
value of timer T200 used for the
T200SACCH T200 SACCH GCELLCCTM the effect of the parameter, see the GBFD-
SACCH over the Um interface
S SDCCH BSC6900 R(Optional) description of "T200 SDCCH". 111002
when the TCH supports SAPI0
services. For the function of timer
SET T200 and the effect of the
T200 SACCH GCELLCCTM parameter, see the description of GBFD-
T200SACCT0 TCH SAPI0 BSC6900 R(Optional) "T200 SDCCH". 111002
establish a timer. When the timer
expires, the transmit end regards
that the receive end does not
receive the message and then the
transmit end retransmits the
message. The number of
retransmissions is determined by
N200. T200 and the N200 ensure
SET that the data link layer sequentially
GCELLCCTM transmits data and that the GBFD-
This parameter specifies the expiry
T200SDCCH T200 SDCCH BSC6900 R(Optional) transmission is free from errors. 111002
value of timer T200 when the
SDCCH supports SAPI3 services.
SET For the function of timer T200 and
T200 SDCCH GCELLCCTM the effect of the parameter, see the GBFD-
T200SDCCH3 SAPI3 BSC6900 R(Optional) description of "T200 SDCCH". 111002
Timer in the LAPD protocol. The
SET value of the timer indicates the
BTSRINGATT maximum duration for no frame GBFD-
T203 T203 BSC6900 R(Optional) exchange in the LAPD link. 117802
After a local link is inhibited, this
SET timer is started to regularly check
Local inhibit test MTP3TMR(O the management states at both GBFD-
T22TMR timer BSC6900 ptional) ends of the link. 111804
After a remote link is inhibited, this
SET timer is started to regularly check
This timer is a protection timer
Remote inhibit MTP3TMR(O the management states at both GBFD-
waiting for an extended
T23TMR test timer BSC6900 ptional) ends of the link. 111804
changeover acknowledgement
message (XCA) from the peer end
SET after an extended changeover
Changeover ACK MTP3TMR(O order message (XCO) is sent to GBFD-
T2TMR timer BSC6900 ptional) the peer end. 111804
Timer T3. T3 is started after the
message
Duration of SUSPEND
releasing is thereceived
TBF after
SET When
on the the
BSC BTS sends
side.
the MS receives the last T3 isphysical
stopped
data
BSSGPPARA( information
after
block.theWhen tothe
message theMS MS, the BTSthe
SUSPEND
receives ACK GBFD-
T3 T3 BSC6900 Optional) starts
is the
received. timer T3105.If
RLC data block containing the flag the timer 119001
T3168
T3105 is used to
expires set the
before the maximum
BTSand
identifying the last data block
duration
receives for
the the
SAMBMS frame
to waitfromfor the
CHG confirms that all the RLC data
uplink
MS, theassignment
BTS resends message.
physical After
BTSPTUSHK blocks
Value inthe
thethird
TBF timer
are received, the
the MSoforiginates
information to the MS
for theTBF
the uplink
and
PTU
restarts
GBFD-
T3 Time3 BSC6900 TM(Optional) MS sends the packet downlink
handshake 118601
setup
the request
timer T3105. by The
sending
maximumthe
acknowledge message containing
packet
times forresource
resending request
physicalor the GBFD-
the last flag acknowledgement and
SET channel
information request
is "Max in the packet
Resend
the timer T3192 is started. IfTimes
the 110601
GCELLHOAD uplink
of acknowledge message, the
timer T3192 expires, the MS GSM
Phy.Info.". For details, see GBFD-
T3105 T3105 BSC6900 (Optional) timer
Rec. T3168and
04.08 is started
08.58. to wait for 510501
releases the TBF related
the packet uplink assignment
resources and starts monitoring
message on the network side. If
SET the paging channel. During TBF
the MS receives the packet uplink
GCELLGSMR releasing, if the MS is the
Timer for retransmitting thehalf
VGCS GBFD-
assignment message before
T3115 T3115 BSC6900 (Optional) duplex
UPLINKmode GRANT andmessage
receives the 510302
T3168 expires, T3168 is reset.
packet uplink assignment, the MS
Otherwise, the MS originates the
responds this command. During
SET packet access request for four
TBF releasing, if the MS is the half
GCELLPSBA times. Then the MS regards this as GBFD-
duplex mode and receives no
T3168 T3168 BSC6900 SE(Optional) the TBF setup failure. 114101
packet uplink assignment
message, the MS enters the
SET packet idle mode. If the MS is in
GCELLPSBA the dual transmission mode, the GBFD-
T3192 T3192 BSC6900 SE(Optional) MS enters the special mode. 114101
SET
GCELLIDLEB This parameter specifies the length
ASIC(Optional of the timer for periodic location GBFD-
T3212 T3212 BSC6900 ) update. 110301
ADD
MTP3LNK(Op Test code length of the signaling GBFD-
TCLEN Test code length BSC6900 tional) link. By default, the value is 10. 111804
ADD
MTP3LNK(Ma GBFD-
TCMODE TC mode BSC6900 ndatory) Mode of TC 111804
SET
TCMUTEDET Mute Detect GCELLSOFT( Whether to enable the class-1 GBFD-
ADD
ECTFLAG Class1 Switch BSC6900 Optional) mute detection. 111203
BTSRXUCHAI
N(Mandatory)
CBN Number of the cabinet where the
BTSRXUCHAI main board of the RXU ring is GBFD-
TCN Tail Cabinet No. BSC6900 N(Mandatory) located 111202
ADD
ATERCONPA Number of the TC port where one
TH(Mandatory
end of the ATER connection
If you enable the TC pool function
TCPN TC Port No BSC6900 ) channel is located None
when configuring the basic
information of the BSC6900, you
SET need to enter the TC Pool ID. The
BSCBASIC(M ID must be unique in the entire GBFD-
TCPOOLID TC Pool ID BSC6900 andatory) network. 113726
ADD
ATERCONPA Number of the TC slot where one
TH(Mandatory end of the ATER connection
TCSN TC Slot No BSC6900 ) The
channeltypeisoflocated
TC resource None
GTC: TC resources that support
ADD
normal voice coding/decoding and
ATERCONPA Number of the TC subrack where
packet conversion
TH(Mandatory Input
one end mode of the
of the ATERBA connection
table. In auto
UTC: TC resources that support
TCSRN TC Subrack No BSC6900 ) mode,
channelthe is system
located fills in the BA1 None
only the optimized handover on the
and BA2 tables based on the
Iur-g interface
adjacent relation of cells. In
SET ITC: TC resources that support
manual mode, the user maintains
The type of TC TCTYPE(Man only the dual-stack function on the MRFD-
the BA table. If the adjacent
TCTYPE resource BSC6900 datory) A interface 210301
relation of cells is modified, for
SET example, a neighboring cell is
GCELLIDLET When
added the or apriority
cell is of a TDDthe
deleted, celluser
is
TDD BA1 Input DDBA1(Mand ranked,
needs tothe value of
maintain thethis
BA1parameter
and GBFD-
TDDBA1TAG Tag BSC6900 atory) is
BA2 added to the receive level of the
tables. 114302
A TDD cell can become a
TDD cell in the measurement
SET candidate
Whether cellFDD
the onlyBA2
when the is
table
Threshold
report. for determining whether
GCELLHOTD average
generated
the
receive level of the
automatically TDD
according
TheMR about
values of a TDD
this cell is valid.
parameter
TDDBA2 Input DBA2(Mandat cell
to
The
is greater
the neighboring
measurement
than relation
the TDDorCelltyped
report is decibel
valid if MRFD-
correspond to the following
TDDBA2TAG Tag BSC6900 ory) Reselect
manually. Diversity of the serving 210301
the receive level of the TDD cell in
values:
cell.
SET the
0: 0measurement
dB report is greater
The value of this parameter
GCELLCCUT than
1: 6 dB the value of this parameter.
corresponds to the following
TDDCELLOF TDD Reporting RANSYS(Opti After
... the valid measurement report GBFD-
decibel value:
F Offset BSC6900 onal) is
7: filtered,
42 dB the TDD cell joins in the 114302
0: negative infinity
cell prioritization.
SET 1: -28 dB
The value of this parameter
TDD Cell GCELLCCUT 2: -24 dB
corresponds to the following
TDDCELLRE Reselect RANSYS(Opti ... GBFD-
decibel value:
SELDIV Diversity BSC6900 onal) 15: 28 dB 114302
0: 0 dB
SET 1: 6 dB
GCELLCCUT ...
TDDCELLTH TDD Reporting RANSYS(Opti 6: 36 dB GBFD-
RED Threshold BSC6900 onal) 7: positive infinity 114302
SET
GCELLIDLET This parameter specifies whether
Downlink frequency of frequency 1
TDDDIVERSI DDBA1(Mand to activate the diversity mode on GBFD-
in table 3GBA2. This parameter
TY Diversity BSC6900 atory) the common channel of a 3G cell. 114302
indicates the detected downlink
SET frequency in the 3G adjacent cell
GCELLIDLET list in speech. The parameter is
TDDDLUARF DDBA1(Mand delivered in the system information GBFD-
AN DL UARFAN BSC6900 atory) 2QUTER/MI. 114302
SET
TDDMIOPTIM TDD MI System GCELLCCUT This parameter specifies whether
IZEDALLOW Information RANSYS(Opti the TDD MI system information GBFD-
ED Optimized BSC6900 onal) optimized function is enabled. 114302
TDD MI System SET
INFO GCELLCCUT This parameter determines
TDDMIPROHI Broadcasting RANSYS(Opti whether the broadcasting of the MI GBFD-
BIT Prohibit BSC6900 onal) TDD
systemcellinformation
parameterisID. The ID is
prohibited. 114302
used to distinguish terminals or
cells. This parameter is used after
ADD Minimum RSCP quality threshold
spread spectrum. Therefore, it
TDDRSCPQU PS TDD RSCP GEXT3GCEL Cell parameter
that the TDD 3GIDcandidate
of a TDD cell
cell. GBFD-
does not change the bandwidth of
ALTHRSH Quality Threshold BSC6900 L(Optional) The
mustcell parameter ID
reach 114302
signals, but only distinguishes the
distinguishes between MSs or
SET signals from different sources.
cells. It is used after spread
GCELLIDLET Through scrambling, multiple
spectrum. Therefore, it
TDDSCRAMB Cell Parameter DDBA1(Mand transceivers can use the same GBFD-
distinguishes between the signals
LE ID BSC6900 atory) codes for spread spectrum. 114302
from different sources, but not
SET changes the bandwidth of signals.
GCELLHOTD Through scrambling, multiple
TDDSCRAMB Cell Parameter DBA2(Mandat transceivers can use the same MRFD-
LE ID BSC6900 ory) codes for spread spectrum. 210301
TDD System SET This parameter determines
SET
TDDSIOPTIM Information GCELLCCUT whether the TDD system
GCELLIDLET SyncCase in the TDDBA1 table.
IZEDALLOW Optimized RANSYS(Opti information optimized function is GBFD-
DDBA1(Mand This parameter determines the
ED Allowed BSC6900 onal) enabled. 114302
atory) synchronization status. Value 0
SET indicates Sync case 1 and value 1
GCELLHOTD indicates Sync case 2. This
TDDSYNCCA DBA2(Mandat parameter is used to identify GBFD-
SE Sync Case BSC6900 ory) different 3G cells. 114302
If the ratio of available TDM
ADD bandwidth is greater than this
TDMCONGC Congestion clear TRMLOADTH value, congestion control is GBFD-
LRTH remain ratio BSC6900 (Optional) stopped. 118605
If the ratio of available TDM
ADD bandwidth is less than or equal to
TDMCONGT Congestion TRMLOADTH this value, congestion control is GBFD-
H remain ratio BSC6900 (Optional) triggered. 118605
Each subrack has six TDM port
numbers, ranging from 0 to 5.
ADD Subrack 1 TDM Port No. refers to
Subrack 1 TDM SRCONPATH( the TDM port number on subrack 1 GBFD-
TDMN1 Port No BSC6900 Mandatory) of the inter-subrack connection.. 111203
Each subrack has six TDM
numbers, ranging from 0 to 5.
ADD Subrack 2 TDM Port No. refers to
Subrack 2 TDM SRCONPATH( the TDM number on subrack 2 of GBFD-
TDMN2 Port No BSC6900 Mandatory) the inter-subrack connection. 111203
ADD
PBSL(Optiona Terminal endpoint ID of the Pb GBFD-
TEI TEI BSC6900 l) signaling link 111203
Enable ADD
Temperature EMU(Optional MRFD-
TEMP_MASK Alarm Reporting BSC6900 ) Temperature alarm switch 210304
ADD
AEC is an important measure to
Content of GSMSCB(Ma Content of the cell broadcast GBFD-
improve the speech quality. If the
TEXT Message BSC6900 ndatory) message 113602
AEC works for a consecutive time
that is longer than the value of this
SET parameter, the TFO function is
TFOOptSwitc TFO Option TCPARA(Opti closed to provide a better speech GBFD-
h Switch BSC6900 onal) quality. 115701
In the VSWR test, the TRX
STR transmits signals at a default
BTSVSWRTS frequency. You can specify the GBFD-
TFREQ Test Frequency BSC6900 T(Optional) frequency used for the test. 111207
This parameter indicates start
frame number of the BTS. It is
SET used to keep synchronization
TFRMSTART GCELLOTHE between the BTS and MS after the MRFD-
TIME Frame Start Time BSC6900 XT(Optional) BTS is re-initialized. 210301
SWP
OMUAREA(M GBFD-
TG Target OMU BSC6900 andatory) Target OMU 111203
ADD
TGWIP(Mand
TGWID TGW ID BSC6900 atory) TGW ID None
ADD This
Timerparameter indicates the
Th. After receiving the MS
mask
TGWIPOAMM TGW IP_TRANS TGWIP(Mand of the operation and maintenance
flow control message, the SGSN
ASK IP Mask BSC6900 atory) console
uses thefor TGW.of the updated
values None
Bmax and R based on the interval
ADD set
Slotby this timer.
number of theWhen this
BSC6900
TGWPEERS TGW TRANS TGWIP(Mand parameter is setinterworking
interface board to a smallerwith
value,
N Slot No. BSC6900 atory) the
TGW.SGSN can use the flow control None
parameter in a shorter time. In this
way, the data can be transferred
ADD Subrack number of the BSC6900
according to the most suitable flow
TGWPEERS TGW Trans TGWIP(Mand interface board interworking with
control parameters, which can
RN Subrack No. BSC6900 atory) TGW. None
improve the transmission
performance. When this parameter
SET is set to a greater value, the SGSN
BSSGPPARA( uses the flow control parameter in GBFD-
Voltage threshold for switching off
TH Th BSC6900 Optional) a longer time. 114101
the air conditioner. If the power
supply voltage is less than this
Voltage threshold for switching on
SET threshold, the air conditioner
the air conditioner. This parameter
Volt Threshold for BTSAIRCON( needs to be switched off to GBFD-
assumes that the air conditioner is
THDOFF Off BSC6900 Optional) decrease the impact on the BTS. 111202
switched off. If the power supply
voltage is greater than this
SET threshold, the air conditioner
Volt Threshold for BTSAIRCON( needs to be switched on to ensure GBFD-
Combination of the THP1 and
THDON On BSC6900 Optional) that the BTS runs properly. 111202
ARP1 priority in the Interactive
service. THP1-ARP1 priority
SET weight determines the number of
THP1ARP1P THP1-ARP1 GCELLPSCH the budget blocks and the block GBFD-
Combination of the THP1 and
RIWEIGHT Priority Weight BSC6900 M(Optional) scheduling priority. 119902
ARP2 priority in the Interactive
service. THP1-ARP2 priority
SET weight determines the number of
THP1ARP2P THP1-ARP2 GCELLPSCH the budget blocks and the block GBFD-
Combination of the THP1 and
RIWEIGHT Priority Weight BSC6900 M(Optional) scheduling priority. 119902
ARP3 priority in the Interactive
service. THP1-ARP3 priority
SET weight determines the number of
THP1ARP3P THP1-ARP3 GCELLPSCH the budget blocks and the block GBFD-
Combination of the THP2 and
RIWEIGHT Priority Weight BSC6900 M(Optional) scheduling priority. 119902
ARP1 priority in the Interactive
service. THP2-ARP1 priority
SET weight determines the number of
THP2ARP1P THP2-ARP1 GCELLPSCH the budget blocks and the block GBFD-
RIWEIGHT Priority Weight BSC6900 M(Optional) scheduling priority. 119902
Combination of the THP2 and
ARP2 priority in the Interactive
service. THP2-ARP2 priority
SET weight determines the number of
THP2ARP2P THP2-ARP2 GCELLPSCH the budget blocks and the block GBFD-
Combination of the THP2 and
RIWEIGHT Priority Weight BSC6900 M(Optional) scheduling priority. 119902
ARP3 priority in the Interactive
service. THP2-ARP3 priority
SET weight determines the number of
THP2ARP3P THP2-ARP3 GCELLPSCH the budget blocks and the block GBFD-
Combination of the THP3 and
RIWEIGHT Priority Weight BSC6900 M(Optional) scheduling priority. 119902
ARP1 priority in the Interactive
service. THP3-ARP1 priority
SET weight determines the number of
THP3ARP1P THP3-ARP1 GCELLPSCH the budget blocks and the block GBFD-
Combination of the THP3 and
RIWEIGHT Priority Weight BSC6900 M(Optional) scheduling priority. 119902
ARP2 priority in the Interactive
service. THP3-ARP2 priority
SET During channel assignment,
weight determines the number theof
THP3ARP2P THP3-ARP2 GCELLPSCH assignment of channels
the budget blocks and the block on the GBFD-
Combination
BCCH TRXs of the THP3
depends and
on the
RIWEIGHT Priority Weight BSC6900 M(Optional) scheduling priority. 119902
ARP3 priority in the Interactive
uplink receive level, quality, and
service.
non-BCCH THP3-ARP3
load. The priority
TCHs are
SET During
weight channel assignment,
determines the number the
preferentially assigned on the of
THP3ARP3P THP3-ARP3 GCELLPSCH assignment
the budget of channels
blocks and onblock
the the GBFD-
BCCH TRXs if the following
RIWEIGHT Priority Weight BSC6900 M(Optional) BCCH
schedulingTRXs depends on the
priority. 119902
conditions are met:
uplink receive level, quality, and
1. The uplink receive level after
non-BCCH load. The TCHs are
ADD filtering
Load is higher
balance than "Level
threshold type.
preferentially assigned on the It
TRMLOADTH Thresh.
indicates for Assigning
the threshold Main BCCH
calculation GBFD-
BCCH TRXs if the following
THTYPE Threshold type BSC6900 (Mandatory) Carrier
mode. Channel Under TIGHT 118605
conditions are met:
BCCH".
1. The uplink receive level after
2. Thechannel
uring uplink receive qualitythe
assignment, level
TI_WAIT_SG Receive SGSN SET filtering
This is higher
parameter than "Level
specifies the timer
after filtering
assignment is lower
ofachannels than "Quality
on BCCH
the
SN_PRIVATE Config. Msg. BSCTMR(Opti Thresh.
set to wait forfor
AssigningprivateMain
message GBFD-
Thresh.
BCCH for Assigning
TRXs depends MaintheBCCH
_MESSAGE Timer BSC6900 onal) Carrier
from the Channel
SGSN. Underon TIGHT 119701
Carrier Channel
uplink receive Under
level, TIGHT
quality, and
BCCH".
BCCH".
non-BCCH load. he TCHs are
2. The uplink receive quality level
TIGHTBCCH Level Thresh for SET 3. The non-BCCH
preferentially load onis higher
after filtering isassigned
lower than the
"Quality
ASSMAINBC Assign BCCH GCELLCHMG than
BCCH "IntracellifNon Main BCCH GBFD-
Thresh.TRXs the following
for Assigning Main BCCH
CHLEV Under TBCCH BSC6900 AD(Optional) Load Threshold
conditions are met: of TIGHT BCCH". 118001
Carrier Channel Under TIGHT
The P/N criterion must be met for
1. The uplink receive level after
BCCH".
triggering a TIGHT BCCH
TIGHTBCCH Quality Thresh SET filtering is higher than
3. The non-BCCH load"Level
is higher
handover. That is, the TIGHT
ASSMAINBC for Assign BCCH GCELLCHMG Thresh. for Assigning
than "Intracell Non Main Main BCCH
BCCH GBFD-
BCCH handover can be triggered
CHQUAL Under TBCCH BSC6900 AD(Optional) Carrier Channel of
Load Threshold Under
TIGHT TIGHT
BCCH". 118001
only if P seconds among N
BCCH".
seconds meet the triggering
2. The uplink receive quality level
SET conditions. This parameter
after filtering is lower than "Quality
TIGHTBCCH TIGHT BCCH GCELLHOBA corresponds to P in the P/N GBFD-
Thresh. for Assigning Main BCCH
HOLASTTIME HO Valid Time BSC6900 SIC(Optional) criterion. 118001
Carrier Channel Under TIGHT
The P/N criterion must be met for
BCCH".
triggering a TIGHTBCCH
TIGHTBCCH Load Threshold SET 3. The non-BCCH load is higher
handover. That is, the
HOLOADTHR for TIGHT BCCH GCELLHOAD than "Intracell Non Main BCCH GBFD-
TIGHTBCCH handover can be
ES HO BSC6900 (Optional) Load Threshold of TIGHT BCCH". 118001
triggered only if P seconds among
N seconds meet the triggering
SET conditions. This parameter
TIGHTBCCH TIGHT BCCH GCELLHOBA corresponds to N in the P/N GBFD-
HOSTATTIME HO Watch Time BSC6900 SIC(Optional) criterion. 118001
IMSI paging timer. After enabling
When
the MSC an pool
intra-cell TIGHT
function, theBCCH
handover needs to be performed
BSC6900 receives from the MSC
RX_QUAL If the SDCCH load
(handover the on the TRXstoof
the paging frommessage non-BCCH
attached with
TIGHTBCCH Threshold for SET the compatible
BCCH), the BCCHreceive
downlink in loose
the IMSI. Then, the BSC6900
RXQUALTHR TIGHT BCCH GCELLHOAD frequency
quality reuse patternthan
is greater
recordsmust be smaller
the relation between thethe GBFD-
ES HO BSC6900 (Optional) than
value the
of "IBCA
this Loose Trx SDCCH
parameter. 118001
IMSI and the MSC SP and starts
Load Threshold", and when the
SET the timer with predefined length.
uplink receive level from the MS to
GCELLCHMG If the BSC6900
Whether receives
to enable the BCCHa
the BTS is greater than the
TIGHTBCCH TIGHT BCCH BASIC(Option response
aggressivemessage
frequency with the IMSI
reuse GBFD-
threshold, the SDCCHs on the
SWITCH Switch BSC6900 al) before the timer expires, the
algorithm 118001
TRXs of the compatible non-BCCH
BSC6900 locates the destination
are preferentially assigned.
MSC based on the IMSI and MSC
TIGHTSDCC IBCA Tight Trx SET Otherwise, the SDCCHs on the
SP, and routes the current paging
HRXLEVTHR SDCCH Rxlev GCELLCHMG TRXs of the compatible BCCH are GBFD-
to the MSC.
ED Threshold BSC6900 AD(Optional) preferentially assigned. 117002
If the BSC does not receive a
response when the timer expires,
ADD the BSC6900 clears the relation
TIIMSIPAGIN IMSI Paging GCNOPERAT information between the IMSI and GBFD-
G Timer BSC6900 OR(Optional) MSC SP. 117401
GBFD-
111203
ADD Whether to limit the operation time MRFD-
TIME Time Limit BSC6900 OP(Optional) of the operator 210305
SET
TIME(Optional GBFD-
TIME Time BSC6900 ) Time 111203
SET
GCELLFREQ
SCAN(Option GBFD-
TIME Duration BSC6900 al) Duration of frequency scanning 112401
Within the preset time, no AMR
FR-to-HR handover is allowed if GBFD-
After a handovr due to bad quality
Penalty Time SET the previous FR-to-HR handover 110601
is successful, the penalty on the
TIMEAMRFH after AMR TCHF- GCELLHOFIT fails due to channel unavailability GBFD-
original serving cell is performed
PUNISH H HO Fail BSC6900 PEN(Optional) or channel mismatch. 510501
within the "Penalty Time after BQ
HO": the receive level of the GBFD-
SET original serving cell is decreased 110601
TIMEBQPUNI Penalty Time GCELLHOFIT by "Penalty Level after BQ HO", to GBFD-
SH after BQ HO BSC6900 PEN(Optional) prevent ping-pong handovers. 510501
After an OL subcell to UL subcell
handover of an MS fails, the MS
Penalty Time SET does not perform OL subell-UL
TIMEOTOUF after OtoU HO GCELLHOIU subcell handovers within the value GBFD-
AILPUN Fail BSC6900 O(Optional) of the parameter. 113201
TRC
Reply Time- IPADDR(Optio Timeout time for waiting for the
TIMEOUT Out[ms] BSC6900 nal) TRACERT packet response None
PING
MAC(Optional
)
PING
BTSCFM(Opti Longest waiting time for
TRC
Timeout Time Out BSC6900 onal) multiplexing
Timeout time None
MAC(Optional
When the multiplexed packet is no
)
longer added with new data and
TRC
the timer expires, the multiplexed
BTSCFM(Opti Indicates the timeout time of the
packet is transmitted directly.
TIMEOUT Time Out BSC6900 onal) CFM link tracing detection None
This parameter is determined by
ADD the number of multiplexed packets.
After the fast handover is
BTSABISMUX When the number of multiplexed
successful, the penalty on the
Maximum Delay FLOW(Option packets increases, the value of this GBFD-
ADD original serving cell is performed
TIMEOUT Time BSC6900 al) parameter increases. 118604
GEXT2GCEL within the "Quick handover punish
L(Optional) time": the receive level of the GBFD-
SET original serving cell is decreased 110601
Quick Handover GCELLHOFA by "Quick handover punish value", GBFD-
TIMEPUNISH Punish Time BSC6900 ST(Optional) to prevent ping-pong handovers. 510501
ADD
TRMMAP(Ma GBFD-
TMI TRMMAP ID BSC6900 ndatory) TRMMAP index 118605
STR
FRPORTLOO
TMLEN Time Length BSC6900 P(Mandatory) Loopback time length None
STR Maximum rate of the accumulated
BTSVSWRTS alarm blink duration to the alarm GBFD-
TMODE Test Mode BSC6900 T(Optional) blink measurement period.
Test mode 111207
Assume this threshold is not 0.
When the rate of accumulated
Timer for Bad SET Duration time for determining that
alarm blink duration exceeds the
TMRBADQUA Quality DISC GCELLSOFT( a call is hung up because of poor GBFD-
threshold, an alarm is reported.
LDISCSTAT Statistic BSC6900 Optional) quality 110501
For querying the alarm blink
measurement period, see "LST
Upper time SET Minimum
ALMBLKSW".rate of the
For accumulated
setting the
threshold of ALMBLKPAR alarm blink duration
measurementto theperiod,
alarm MRFD-
CHK
TMRISTHRD raised fault BSC6900 A(Optional) blink measurement
see "SET ALMBLKSW". period. 210304
INNSPCH(Ma
Assume this threshold is not 0.
ndatory)
When the rate of accumulated
STR
alarm blink duration is lower than
CALLRESLO GBFD-
the threshold, an alarm is reported.
TMSI TMSI BSC6900 P(Mandatory) TMSI of the MS 111203
For querying the alarm blink
measurement period, see "LST
Lower time SET ALMBLKSW". For setting the
threshold of ALMBLKPAR alarm blink measurement period, MRFD-
This timer is a protection timer
TMSTLTHRD raised fault BSC6900 A(Optional) see "SET ALMBLKSW". 210304
waiting for a signalling link test
acknowledgement message
SET (SLTA) from the peer end after a
Signalling link MTP3TMR(O signalling link test message GBFD-
TMT1TMR test ACK timer BSC6900 ptional) (SLTM) is sent to the peer end. 111804
CMP
The Ater signaling link operates in
TBLDATA(Ma name of the data table distributed MRFD-
ADD the terrestrial transmission or
TNAME Data Table BSC6900 ndatory) on the board. 210301
ATERSL(Opti satellite transmission mode. In the
onal) areas such as desert and lake
E1 transmission type of the Pb
ADD where the terrestrial transmission
interface. The terrestrial
Transmission ATERCONSL( is difficult, the satellite transmission GBFD-
transmission or satellite
TNMODE Mode BSC6900 Optional) can be used. 113903
transmission can be selected. In
the areas such as desert and lake
ADD where the terrestrial transmission
Transmission PBE1T1(Optio is difficult, the satellite transmission GBFD-
TNMODE Mode BSC6900 nal) can be used. 111203
ADD
IPPATH(Optio Transport type of the adjacent GBFD-
TRANST Transport Type BSC6900 nal) node to which the path belongs. 118605
ADD
TRMMAP(Opt GBFD-
TRANST Transport Type BSC6900 ional) Transport type 118605
ADD
TRMLOADTH GBFD-
TRANST Transport Type BSC6900 (Mandatory) Transport type 118605
SET
BSCABISPRI
MAP(Mandato GBFD-
TRANSTYPE Carrier Type BSC6900 ry) Transmission type of the BTS 111202
BTS SET
Whether to configure the optical
Transmission BTSBWPARA GBFD-
transmission mode for E1 port 0 of
TRANSTYPE Type BSC6900 (Mandatory) Transmission Type 118601
the BTS3006C/BTS3002E. If the
E1 Port 0 Set optical transmission mode is
Optical SET configured, the BSC6900 can
Whether to configure the optical
TRANSTYPE Transmission BTSDOMUBP connect to the BTS through optical GBFD-
transmission mode for E1 port 1 of
0 Mode BSC6900 (Optional) fibers. 111202
the BTS3006C/BTS3002E. If the
E1 Port 1 Set optical transmission mode is
Optical SET configured, the BSC6900 can
Whether to configure the optical
TRANSTYPE Transmission BTSDOMUBP connect to the BTS through optical GBFD-
transmission mode for E1 port 2 of
1 Mode BSC6900 (Optional) fibers. 111202
the BTS3006C/BTS3002E . If the
E1 Port 2 Set optical transmission mode is
Optical SET configured, the BSC6900 can
TRANSTYPE Transmission BTSDOMUBP connect to the BTS through optical GBFD-
2 Mode BSC6900 (Optional) fibers. 111202
Whether to configure the optical
transmission mode for E1 port 3 of
the BTS3006C/BTS3002E. If the
E1 Port 3 Set optical transmission mode is
Optical SET configured, the BSC6900 can
TRANSTYPE Transmission BTSDOMUBP connect to the BTS through optical GBFD-
3 Mode BSC6900 (Optional) fibers. 111202
SET
BTSCLKPAR Whether to enable the limit of the GBFD-
TRCRNGLMT Trace Mode BSC6900 A(Mandatory) tracing range 111202
SET
GCELLRESE
Cell Reselection LECTPARA(O GBFD-
TRESEL Forbidden Time BSC6900 ptional) Forbidden time of cell reselection 114101
The load handover is triggered GBFD-
SET when the traffic load in a cell is 110601
Load HO GCELLHOAD greater than the value of this GBFD-
TRIGTHRES Threshold BSC6900 (Optional) parameter. 510501
ADD
ETHTRKLNK( Port number of the aggregation MRFD-
TRKLNKPN Trunk Link No. BSC6900 Mandatory) member 210103
ADD
ETHTRK(Man
ADD
datory)
Trunk Link Slot ETHTRKLNK( Slot number of the aggregation MRFD-
ADD
TRKLNKSN No. BSC6900 Mandatory) member 210103
ETHTRKLNK(
Mandatory)
ADD
ETHTRKIP(M MRFD-
TRKN Trunk No. BSC6900 andatory) aggregation group number 210103
SET
BSCABISPRI
User TRMMAP MAP(Mandato Specified TRMMAP index of the GBFD-
TRMI index BSC6900 ry) user panel 111202
ADD
TRMLOADTH TRM load RSCGRP(Opti
INDEX threshold index BSC6900 onal) TRM load threshold index None
ADD
TRMLOADTH TRM load TRMLOADTH TRM load threshold index. It is the
INDEX threshold index BSC6900 (Mandatory) unique ID of the load threshold. None
GBFD-
ADD 118611
TRMLOADTH TRM load PPPLNK(Opti GBFD-
INDEX threshold index BSC6900 onal) TRM load threshold index 118622
SET
FHO(Mandato
ry)
SET
GTRXCHANH
OP(Mandator GBFD-
y)
ADD 118611
TRMLOADTH TRM load SET
MPGRP(Optio GBFD-
GTRXHOP(M
INDEX threshold index BSC6900 nal) TRM load threshold index 118622
andatory)
SET
ADD
GTRXBASE(
TRMLOADTH TRM load IPLOGICPOR
Mandatory) GBFD-
INDEX threshold index BSC6900 T(Optional)
SET TRM load threshold index 118605
GTRXCHAN(
SET
Mandatory)
BSCABISPRI
TRMLOADTH TRM load SET
MAP(Mandato
INDEX threshold index BSC6900 GTRXFC(Man
ry) TRM loadtothreshold index None
datory) Whether enable the TRX aiding
SET
SET function. Four aiding modes are
Transport BSCABISPRI
GTRXIUO(Ma available. BCCH aiding: The main
Resource MAP(Optional
ndatory) BCCH is aidedresources
Transmission to another normal
mapping GBFD-
TRMMAPSW Mapping switch BSC6900 )SET TRX
switchin this cell. BCCH aiding 111202
GTRXADMST switchback: BCCH aiding
AT(Mandatory switchback functions after the
ADD originally configured BCCH TRX is
The Trunk group )IPLOGICPOR Trunk groupBaseband
number ofFH theaiding:
logical
SET recovered.
TRUNKN No. BSC6900 T(Optional) port
When the TRX involved in None
GTRXCHANA
DMSTAT(Man baseband FH in the cell is faulty or
STR
datory) BCCH aiding is performed in the
IPCHK(Option
ADD cell, baseband FH aiding occurs GBFD-
TRUNKN Trunk group No. BSC6900 al)
GTRX(Mandat and
TRUNK the cell is initialized
group number as a non- 118609
ory) hopping cell. Baseband FH aiding
ADD switchback: When all the TRXs
ADD
TRXBIND2PH involved in baseband hopping in
ETHMEP(Man GBFD-
YBRD(Mandat the cell are recovered and the
TRUNKN Trunk No. BSC6900 datory) TRUNK group number 118630
ory) originally configured BCCH TRX is
SET
SET normal, baseband FH aiding
GCELLCCAC
GTRXRLALM( switchback can be performed and
TRXAIDSWIT TRX Aiding CESS(Option
Mandatory) the cell is restored to the baseband GBFD-
CH Function Control BSC6900 al)
SET FH mode. 113801
GTRXDEV(M
andatory)
STR
ADD
BTSTST(Man GBFD-
TRXDURATS Duration Second BSC6900 GTRXBIND2H
datory) Duration 111207
DLCPATH(Ma
ndatory)
SET
STR
TRXHOPIND Channel Hop GTRXCHANH Frequency hopping index of the GBFD-
BTSTST(Man
EX Index BSC6900 OP(Optional) channel in the TRX 113701
datory)
STR
TRXBURSTT
ST(Mandatory
Index of a TRX, uniquely MRFD-
The ID of TRX added in the main
TRXID TRX ID BSC6900 ) identifying a TRX in a BSC6900. 210301
location group, the TRX ID must
ADD be globally unique. The same TRX
BTSBINDLOC cannot be bound by the TRX
GRP(Mandato boards in a same location group GBFD-
TRXID TRX ID BSC6900 ry) for multiple times. 510104
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID1 No.1 TRX ID BSC6900 nal) Index of TRX 1 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID10 No.10 TRX ID BSC6900 nal) Index of TRX 10 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID11 No.11 TRX ID BSC6900 nal) Index of TRX 11 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID12 No.12 TRX ID BSC6900 nal) Index of TRX 12 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID13 No.13 TRX ID BSC6900 nal) Index of TRX 13 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID14 No.14 TRX ID BSC6900 nal) Index of TRX 14 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID15 No.15 TRX ID BSC6900 nal) Index of TRX 15 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID16 No.16 TRX ID BSC6900 nal) Index of TRX 16 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID17 No.17 TRX ID BSC6900 nal) Index of TRX 17 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID18 No.18 TRX ID BSC6900 nal) Index of TRX 18 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID19 No.19 TRX ID BSC6900 nal) Index of TRX 19 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID2 No.2 TRX ID BSC6900 nal) Index of TRX 2 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID20 No.20 TRX ID BSC6900 nal) Index of TRX 20 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID21 No.21 TRX ID BSC6900 nal) Index of TRX 21 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID22 No.22 TRX ID BSC6900 nal) Index of TRX 22 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID23 No.23 TRX ID BSC6900 nal) Index of TRX 23 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID24 No.24 TRX ID BSC6900 nal) Index of TRX 24 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID3 No.3 TRX ID BSC6900 nal) Index of TRX 3 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID4 No.4 TRX ID BSC6900 nal) Index of TRX 4 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID5 No.5 TRX ID BSC6900 nal) Index of TRX 5 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID6 No.6 TRX ID BSC6900 nal) Index of TRX 6 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID7 No.7 TRX ID BSC6900 nal) Index of TRX 7 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID8 No.8 TRX ID BSC6900 nal) Index of TRX 8 113703
ADD
GCELLHOPA
NTGRP(Optio GBFD-
TRXID9 No.9 TRX ID BSC6900 nal) Index of TRX 9 113703
SET
GCELLHOPQ
UICKSETUP(
Optional)
SET
GCELLHOPA
NTQUICKSET List of IDs of carriers for frequency GBFD-
TRXIDLST TRXID LST BSC6900 UP(Optional) hopping. 113701
List of TRX indexes. You can
STR specify one TRX index or more
TRXPERFTS TRX indexes, for example, 1 or GBFD-
TRXIDLST TRX Index List BSC6900 T(Mandatory) 0&1&2&&5 in the same BTS. 111207
SET
GTRXCHANH Mobile allocation index offset GBFD-
TRXMAIO Channel MAIO BSC6900 OP(Optional) (MAIO) of the channel in the TRX 113701
BLK
ATERE1T1(M It indicates the Ater interface GBFD-
TS Time Slot BSC6900 andatory) timeslot number 111801
SET
BTSOMLTS(M GBFD-
TS Time Slot NO. BSC6900 andatory) Number of the timeslot on the port 111203
GBFD-
ADD 118611
PPPLNK(Man Bearer E1/T1 port timeslot of PPP
The TSC is short for the Training GBFD-
TSBITMAP Bearing time slot BSC6900 datory) link.
Sequence Code. 118622
The TSC must be the same as the GBFD-
ADD BCC. The delay equalization is 118611
MPLNK(Mand performed
Bearer E1/T1by using the specified
port timeslot of MP GBFD-
ADD
TSBITMAP Bearing time slot BSC6900 atory) TSC
link. when the MS or BTS receives 118622
BTSPPPLNK(
the signal. The demodulation
Mandatory) Timeslot of the E1/T1 link carrying
cannot be received because the
ADD the PPP link. The timeslot of an E1
delay equalization cannot be
Bearing Time BTSMPLNK( port cannot be used by different GBFD-
performed for the signals with
TSBITMAP Slot BSC6900 Mandatory) PPP links. 118611
same frequency using different
TSCs. This can effectively prevent
ADD incorrectly invalid reception, and
GCELLMAGR prevent the co-channel GBFD-
TSC TSC BSC6900 P(Optional) interference. 113701
Number of idle timeslots. You can
configure up to 128 idle timeslots
SET for the BTS at a time. A BTS can
Whether to allow TSC planning. If
BTSIDLETS( be configured with up to 512 idle GBFD-
this parameter is set to No, the
TSCOUNT Idle TS Count BSC6900 Mandatory) timeslots. 114101
TSC values in all MA groups of the
cell cannot be modified. In this
SET case, the TSC values are
GCELLSOFT( automatically refreshed to the BCC GBFD-
TSCPLANEN TSC Plan Enable BSC6900 Optional) values of the cell. 118201
ADD
Time slot cross TSCROSS(O
ADD
TSCROSSX index BSC6900 ptional)
SCHTSK(Man Timeslot cross index None
datory)
STR
SET
TRANSPERF
Duration * 10 SCHTSKSW(
TST(Mandator GBFD-
TSDURAT minutes BSC6900 Optional)
y) Duration in timeslot mode 111207
ADD
SUBTSK(Opti
ADD
onal)
BTSMONITO Index of the monitoring timeslot. GBFD-
ADD
TSIDX Timeslot Index BSC6900 RTS(Optional) The index is unique in a BTS. 114701
SUBCMD(Opt
ional)
STR
SCHTSK(Opti GBFD-
TSKN Task Name BSC6900 onal) Name of the scheduled task. 111203
Time slots for Ater operation and
ADD
ADD maintenance. These time slots are
BTSABISHDL
ATEROML(Ma provided by the ports connected to MRFD-
CPATH(Mand
TSMASK Timeslot Mask BSC6900 ndatory) the Ater connection path. 210301
atory)
ADD
BTSTOPCON
FIG(Mandator The 64 kbit/s timeslots on the port MRFD-
ADD
TSMASK TS Mask BSC6900 y) are numbered from 1 to 31. 211501
BTSRXUCHAI
N(Mandatory) Number of the slot where the main
CBN board of the RXU ring is located.
BTSRXUCHAI The slot No. is unique in the same GBFD-
TSN Tail Slot No. BSC6900 N(Mandatory) BTS. 111202
ADD
PBSL(Mandat Timeslot number of Pb signaling GBFD-
TSNO Timeslot No. BSC6900 ory) link 111203
Assignment priority level of the
SET channel. If this parameter is less,
GTRXCHAN( the assignment priority level of the GBFD-
TSPRIORITY Timeslot Priority BSC6900 Optional) channel is higher. 111005
Maximum degree by which the
output power of the multi-density
SET TRX board can exceed the
TSPWRRESE Timeslot Power GTRXDEV(O maximum output power within a GBFD-
RVE Reserve BSC6900 ptional) short time 111005
Fast flux measurement duration.
SET Normal flux measurement is
Fast Flux BSCPSSOFT performed after the fast flux
TSRAPIDADJ Measurement PARA(Option measurement lasts over the period GBFD-
PERIOD TBF Timer BSC6900 al) specified by this parameter. 119501
Whether to enable fast flux
SET detection. When this parameter is
BSCPSSOFT set to Open, fast timeslot
TSRAPIDADJ Fast Flux PARA(Option adjustment is possible after the GBFD-
SWITCH Detection Switch BSC6900 al) TBF is set up. 119501
ADD
BTSMONITO
RTS(Mandato GBFD-
ADD
TSRATE Time Slot Rate BSC6900 ry) Rate of the monitoring timeslot 114701
BTSRXUCHAI
N(Mandatory) Number of the subrack where the
CBN main board of the RXU ring is
BTSRXUCHAI located. The subrack No. is unique GBFD-
TSRN Tail Subrack No. BSC6900 N(Mandatory) in the same BTS. 111202
STR
BTSTST(Man GBFD-
TSTMODE Test Mode BSC6900 datory) Test mode 111207
STR
TRANSPERF
TSTTIMESLO TST(Mandator GBFD-
T Test Timeslot BSC6900 y) Test timeslot 111202
This parameter specifies whether
to allow the BTS to enable the
STR
TRX Intelligent Shutdown on
BTSBATTTST GBFD-
Timeslot Level feature. When this
TSTTYPE Test Type BSC6900 (Mandatory) Type of battery test 111207
parameter is set to YES and the
BTS supports this feature, the BTS
RXU topology type, that is, RXU
SET will periodically report the number
ring topology or RXU chain
TsTurningOffE Allow Turning Off BSCDSTPA(O of times that the TRX is shut down GBFD-
topology. In the case of the ring
nable Time Slot BSC6900 ptional) on the timeslot level. 111603
topology, the optical ports of the
head and tail boards must be
ADD specified. In the case of the chain
BTSRXUCHAI topology, only the optical port of GBFD-
TT Topo Type BSC6900 N(Mandatory) the head board must be specified. 111202
ADD
Forward IPPATH(Mand GBFD-
TXBW Bandwidth BSC6900 atory) Transmit bandwidth of IP path 118605
ADD
Forward RSCGRP(Ma GBFD-
TxBw Bandwidth BSC6900 ndatory) Transmit bandwidth
This parameter specifies the 118605
frequency band of new cells. Each
new cell can be allocated
Interval of PING frequencies
Indicates theofinterval
only one frequency
between the
TXINT send[ms] BSC6900 IP(Optional) band.
two sent OncePINGthepackets
frequency band is None
Extension
selected, ittransmission timeslots
cannot be changed.
Explanation
of random of the finish
access. This type of
parameter
GSM900: The cell supports
SET the batch commands
determines
GSM900 frequency band. sending
the interval of
GCELLPRAC 1. ANY_ERR_RETURN:
another
DCS1800: channel
The cellrequest If there
after
supports theis GBFD-
TXINT TX_INT BSC6900 H(Optional) a
MS command
fails to whose aexecution
request channel. fails, 119110
DCS1800 frequency band.
the execution of the batch
GSM900_DCS1800: The cell
commands is stopped and the
ADD supports GSM900 and DCS1800
execution of the file fails.
SUBRACK(M frequency bands. MRFD-
2. ALL_END_RETURN: If all
TYPE Subrack Type BSC6900 andatory) GSM850:
Type of theThe cell supports
subrack 210301
commands in the batch file are
GSM850 frequency band.
executed in one operation, the
GSM850_DCS1800: The cell
RUN execution of the file is successful
supports GSM850 and DCS1800
BATCHFILE( no matter whether there is GBFD-
frequency bands.
TYPE Finish Type BSC6900 Mandatory) execution failure in the process. 111203
PCS1900: The cell supports
PCS1900 frequency band.
ADD GSM850_PCS1900: The cell
GCELL(Mand supports GSM850 and PCS1900 GBFD-
TYPE Freq. Band BSC6900 atory) frequency bands. 110101
SET
BSCPCUTYP GBFD-
TYPE PCU Type BSC6900 E(Mandatory) Type of the PCU 114101
Frequency band to which the
newly added cell belongs. Only
one frequency band can be
selected as the frequency band of
each new cell and cannot be
ADD changed after the selection. To
BTSAUTOPL modify the frequency band of the
AN(Mandatory new cell, you must delete the cell GBFD-
TYPE Freq. Band BSC6900 ) and then add it again. 510701
ADD
BTSCABINET GBFD-
TYPE Cabinet Type BSC6900 (Optional) Type of a cabinet 111202
ADD
GCELLQUICK Cell type. Currently, the fast BTS
SETUP(Mand construction is available for only GBFD-
TYPE Cell Type BSC6900 atory) GSM900 and DCS1800 cells. 110101
SET
Up0 Power BTSANTFEE
Attenuation DERCONNEC Power attenuation factor of uplink GBFD-
U0GEN Factor BSC6900 T(Optional) tributary 0 111202
SET
BTSANTFEE
Up0 Tower-Top DERCONNEC Whether there is a TMA on uplink GBFD-
Index of uplink tributary 0. Each
U0TOW Amplifier Flag BSC6900 T(Optional) tributary 0 111202
uplink tributary can be configured
SET with a maximum of 12 TRXs. This
BTSANTFEE parameter indicates the serial
DERCONNEC number of a TRX on the uplink GBFD-
U0TRX Up0 Link No. BSC6900 T(Optional) tributary. 111202
SET
BTSANTFEE
Up0 TRX Board DERCONNEC TRX board pass number GBFD-
U0TRXBPN Pass No. BSC6900 T(Optional) connected to uplink tributary 0 111202
SET
BTSANTFEE Number of the slot where the TRX
Up0 TRX Slot DERCONNEC board that connects to uplink GBFD-
U0TRXSN No. BSC6900 T(Optional) tributary 0 is located 111202
SET
BTSANTFEE Number of the subrack where the
Up0 TRX DERCONNEC TRX board that connects to uplink GBFD-
U0TRXSRN Subrack No. BSC6900 T(Optional) tributary 0 is located 111202
SET
Up1 Power BTSANTFEE
Attenuation DERCONNEC Power attenuation factor of uplink GBFD-
U1GEN Factor BSC6900 T(Optional) tributary 1 111202
SET
BTSANTFEE
Up1 Tower-Top DERCONNEC Whether there is a TMA on uplink GBFD-
Index of uplink tributary 1. Each
U1TOW Amplifier Flag BSC6900 T(Optional) tributary 1 111202
uplink tributary can connect to a
SET maximum of 12 TRXs. This
BTSANTFEE parameter indicates the serial
DERCONNEC number of a TRX on the uplink GBFD-
U1TRX Up1 Link No. BSC6900 T(Optional) tributary. 111202
SET
BTSANTFEE
Up1 TRX Board DERCONNEC TRX board pass number GBFD-
U1TRXBPN Pass No. BSC6900 T(Optional) connected to uplink tributary 1 111202
SET
BTSANTFEE Number of the slot where the TRX
Up1 TRX Slot DERCONNEC board that connects to uplink GBFD-
U1TRXSN No. BSC6900 T(Optional) tributary 1 is located 111202
SET
BTSANTFEE Number of the subrack where the
Up1 TRX DERCONNEC TRX board that connects to uplink GBFD-
U1TRXSRN Subrack No. BSC6900 T(Optional) tributary 1 is located 111202
Service priority of call
SET reestablishment when CS services
CS Preferred CSABISCON are preferred. This parameter is
ucCSPrefCall Call Reestablish GCTRL(Optio used for the flow control in the GBFD-
ReestPrio Priority BSC6900 nal) case of Abis over IP/HDLC. 118601
Service priority of the CS
SET emergency call when CS services
CS Preferred CS CSABISCON are preferred. This parameter is
ucCSPrefCSE Emergency Call GCTRL(Optio used for the flow control in the GBFD-
mergCallPrio Priority BSC6900 nal) case of Abis over IP/HDLC. 118601
Service priority of the CS MS-
SET originated call when CS services
CSABISCON are preferred. This parameter is
ucCSPrefCS CS Preferred CS GCTRL(Optio used for the flow control in the GBFD-
OrgCallPrio MOC Priority BSC6900 nal) case of Abis over IP/HDLC. 118601
Service priority of the CS MS-
SET terminated call when CS services
CSABISCON are preferred. This parameter is
ucCSPrefCST CS Preferred CS GCTRL(Optio used for the flow control in the GBFD-
ermCallPrio MTC Priority BSC6900 nal) case of Abis over IP/HDLC. 118601
Service priority of the incoming
SET BSC handover when CS services
CS Preferred CSABISCON are preferred. This parameter is
ucCSPrefInBs Into-BSC HO GCTRL(Optio used for the flow control in the GBFD-
cHoPrio Priority BSC6900 nal) case of Abis over IP/HDLC. 118601
Service priority of the intra-BSC
SET handover when CS services are
CS Preferred CSABISCON preferred. This parameter is used
ucCSPrefIntra Intra-BSC HO GCTRL(Optio for the flow control in the case of GBFD-
BscHoPrio Priority BSC6900 nal) Abis over IP/HDLC. 118601
Priority of other services when CS
SET services are preferred. This
CS Preferred CSABISCON parameter is used for the flow
ucCSPrefOth Other Service GCTRL(Optio control in the case of Abis over GBFD-
erPrio Priority BSC6900 nal) IP/HDLC. 118601
PS service priority when CS
SET services are preferred. This
CSABISCON parameter is used for the flow
ucCSPrefPSP CS Preferred PS GCTRL(Optio control in the case of Abis over GBFD-
rio Priority BSC6900 nal) IP/HDLC. 118601
Priority of supplementary services
SET when CS services are preferred.
CS Preferred CSABISCON This parameter is used for the flow
ucCSPrefSup Supplement GCTRL(Optio control in the case of Abis over GBFD-
plePrio Priority BSC6900 nal) IP/HDLC. 118601
VBS service priority when CS
SET services are preferred. This
CSABISCON parameter is used for the flow
ucCSPrefVBS CS Preferred GCTRL(Optio control in the case of Abis over GBFD-
Prio VBS Priority BSC6900 nal) IP/HDLC. 118601
VGCS service priority when CS
SET services are preferred. This
CSABISCON parameter is used for the flow
In A over IP, if the parameter is set
ucCSPrefVG CS Preferred GCTRL(Optio control in the case of Abis over GBFD-
to ON, the circuit IE in the A
CSPrio VGCS Priority BSC6900 nal) IP/HDLC. 118601
interface extended signaling must
be processed in the same way as
Controlling of SET that in A over non-IP. Otherwise,
CIC IE In BSS MSGSOFTPA the A interface extended signaling GBFD-
ucCtrlOfCicIE Map Messages BSC6900 RA(Optional) cannot carry circuit-type IE. 118602
ADD
Local UDP Port NSVLLOCAL( UDP port number of the local GBFD-
UDPPN No. BSC6900 Mandatory) NSVL 118603
STR
E1T1TST(Opti Unit time for the error code ratio
UINTTIME Unit time[ms] BSC6900 onal) test None
SET
ALMPORT(Op MRFD-
UL Upper Limit BSC6900 tional) Upper limit for triggering an alarm 210304
SET
BTSENVALM Upper limit of the alarm. This
PORT(Option parameter is valid to the analog MRFD-
UL Upper Limit BSC6900 al) port. 210304
OML/ESL/EML SET
LAPD Uplink BTSLAPDWS Size of the OML/ESL/EML Uplink GBFD-
UPOMLWS Window Size BSC6900 (Optional) LAPD Window 118601
SET GBFD-
GCELLBASIC 110703
PARA(Option GBFD-
UPPCEN UL PC Allowed BSC6900 al) Whether to allow MS power control 117601
Upper Class Upper class transport resource
Transport ADD group No. It is valid only when " Is
UPPERGRPI Resource Group RSCGRP(Ma First Class Transport Resource GBFD-
D No. BSC6900 ndatory) Group " is set to NO. 118605
If the difference between uplink
receive levels of calls within the
same timeslot is greater than
"Offset of the difference between
ADD
uplink received levels" for P
The Upper logic IPLOGICPOR
seconds among N seconds, the
UPPERLP port number BSC6900 T(Optional) Upper number of the logical port None
call with weak uplink receive level
After the existing uplink receive
within the timeslot will be handed GBFD-
level,
Delay uplink receivethe level after the
Duration of SET over toofanother
releasing timeslot.non-
This 110601
previous
extended optimization,
uplink and
TBF. After the
UPRXLEVLA Uplink Received GCELLCHMG If the difference
parameter between
corresponds touplink
P in the GBFD-
value of
receiving this parameter
the last uplink are
RLCweight-
data
STTIME Level Differ BSC6900 AD(Optional) receive levels
P/N criterion. of calls within the 510501
averaged,
block the uplink receive level
same (CountValue=0),
timeslot is greaterthe network
than
after
side the optimization
sends thedifference
message at this time is
Packet GBFD-
"Offset of the between
Smooth Factor of SET obtained
Uplink and used
Ack/Nack forFAI=1
with determing
to 110601
uplink received levels" for P
UPRXLEVSM Uplink Received GCELLCHMG the difference
notify theamong
MS of between
releasingthetheuplink GBFD-
seconds N seconds, the
OOTHPARA Level BSC6900 AD(Optional) receive
uplink levels.
TBF. After this receive
parameter is 510501
call with weak uplink level
set, thethe
within network
timeslot side
willnotifies
be handed the GBFD-
This parameter specifies whether
Observe Time of SET MS
overoftoreleasing this TBF This
another timeslot. after 110601
the transmission of point-to-point
UPRXLEVST UL RX Level GCELLCHMG specified
parameterdelay. In this way,
corresponds to Nthein the GBFD-
short messages is disabled. If
ATICTIME Difference BSC6900 AD(Optional) downlink TBF can be established
P/N criterion. 510501
necessary, the transmission of the
on the unreleased uplink TBF. This
uplink short messages in a specific
uplink TBF is automatically
SET cell can be disabled so that
released when the downlink TBF is
UPSENDSMD Short Message GCELLCCAD( sufficient radio channels can be GBFD-
established or when the delay
IS Uplink Disabled BSC6900 Optional) seized by normal calls. 110203
duration exceeds the time set by
SET the uplink non-extended TBF. If
Retransmission threshold when
Release Delay of GCELLPRIVA this parameter is set to 0, the
the coding mode of the uplink TBF
UPTBFRELD Non-extended TEOPTPARA( release delay of non-extended GBFD-
is changed from CS2 to CS1.
ELAY Uplink TBF BSC6900 Optional) TBF is disabled. 119203
When the retransmission rate of
the uplink TBF is greater than or
Retransmission threshold when
Uplink TBF SET equal to this threshold, the coding
the coding mode of the uplink TBF
UPTHDCSDE Threshold from GCELLPSCS( mode of the uplink TBF is changed GBFD-
is changed from CS3 to CS2.
GRADE1 CS2 to CS1 BSC6900 Optional) from CS2 to CS1. 119106
When the retransmission rate of
the uplink TBF is greater than or
Retransmission threshold when
Uplink TBF SET equal to this threshold, the coding
the coding mode of the uplink TBF
UPTHDCSDE Threshold from GCELLPSCS( mode of the uplink TBF is changed GBFD-
is changed from CS4 to CS3.
GRADE2 CS3 to CS2 BSC6900 Optional) from CS3 to CS2. 118901
When the retransmission rate of
the uplink TBF is greater than or
Retransmission threshold when
Uplink TBF SET equal to this threshold, the coding
the coding mode of the uplink TBF
UPTHDCSDE Threshold from GCELLPSCS( mode of the uplink TBF is changed GBFD-
is changed from CS1 to CS2.
GRADE3 CS4 to CS3 BSC6900 Optional) from CS4 to CS3. 118901
When the retransmission rate of
the uplink TBF is less than or
Retransmission threshold when
Uplink TBF SET equal to this threshold, the coding
the coding mode of the uplink TBF
UPTHDCSUP Threshold from GCELLPSCS( mode of the uplink TBF is changed GBFD-
is changed from CS2 to CS3.
GRADE1 CS1 to CS2 BSC6900 Optional) from CS1 to CS2. 119106
When the retransmission rate of
the uplink TBF is less than or
Retransmission threshold when
Uplink TBF SET equal to this threshold, the coding
the coding mode of the uplink TBF
UPTHDCSUP Threshold from GCELLPSCS( mode of the uplink TBF is changed GBFD-
is changed from CS3 to CS4.
GRADE2 CS2 to CS3 BSC6900 Optional) from CS2 to CS3. 118901
When the retransmission rate of
the uplink TBF is less than or
Uplink TBF SET equal to this threshold, the coding
UPTHDCSUP Threshold from GCELLPSCS( mode of the uplink TBF is changed GBFD-
GRADE3 CS3 to CS4 BSC6900 Optional) from CS3 to CS4. 118901
Whether to allow cell urgent
reselection. If this parameter is set
to PERMIT and [NC2 Load
Reselection Switch is set to
Cell Urgent SET Support, the load of the target cell
URGENTRES Reselection GCELLNC2P is involved in the algorithm for NC2 GBFD-
CHK
ELALLOW Allowed BSC6900 ARA(Optional) cell reselection. 116201
INNSPCH(Ma
ndatory)
STR
CALLRESLO
DLD Mode of querying the information GBFD-
USERIDTYPE User Query Type BSC6900 P(Mandatory)
RETANTCFG( on an MS 111203
Mandatory)
SET
Support USF ULD
BSCPSSOFT
USFGRAN4B Granularity 4 BTSDEVFILE(
PARA(Option Whether to support USF GBFD-
DLD
LK Switch BSC6900 Mandatory)
al) granularity 4 114101
LICENSE(Ma
DLD
ndatory) GBFD-
BTSPATCH(M
ULD 111203
andatory)
User Name of LICENSE(Ma MRFD-
ULD
USR FTP Server BSC6900 ndatory) User name of the FTP server 210403
BTSLOG(Man
datory) User name for the FTP server.
DLD When the FTPServer.exe file
BTSSW(Mand downloaded through the LMT is GBFD-
USR FTPServer User BSC6900 atory) installed, the user name is admin. 111202
When
Upper this parameter
temperature is set to for
threshold YES,
Energy Saving SET the
Start time when the TRX energythe
the existing
environment call is performed
alarm box to in
USTBGNTIM Start BTSDOMUBP OL subcell,
report
saving an and is
alarm
function "OL to UL that
indicating
enabled HO
for thethe GBFD-
E Time[HH:MM] BSC6900 (Mandatory) Allowed"
ambient
BTS3002E. is set to YES,
temperature is an
tooOL high. If 111202
subcell
the ambient to ULtemperature
subcell handover of the is
triggered if the traffic
BTS is higher than this threshold, volume in the
Energy Saving SET End
UL time when the TRX energyIuo
the subcell
environment is smaller alarm than
box"En reports
USTENDTIM End BTSDOMUBP When
saving
Out Cellafunction
UL
Lowsubcell-OL
is enabled
Load Thred".subcel
for the GBFD-
the alarm.
E Time[HH:MM] BSC6900 (Mandatory) handover
BTS3002E.
If decision is performed into 111202
Inthe existing call
multi-mode is performed
scenario, the value
a
thecall,
UL the BSC a
subcell, determines
UL subcell to OL
of this parameter in this mode
whether
subcell the number of handover
Upper SET must behandover
the sameisastriggered, the valueand of
failures reaches the "MaxRetry
Temperature BTSEXD(Opti "UL to OL HO Allowed"
the corresponding parameteris set to in GBFD-
Time
YES, after
themode. UtoOisFail".
timer started If the
and the
UTEMTHD Threshold BSC6900 onal) another 111202
number reaches
calls in the UL subcell are the threshold, the
UL subcell to OL
hierarchically handed subcell overhandover
to the
SET is
OLprohibited.
subcell if the Otherwise,
traffic volumethe ULin
UTOOFAILM MaxRetry Time GCELLHOIU subcell
the to OL subcell handover Iuo is GBFD-
AfterUL ansubcell
MS performs reachesa "En OL subcell Out
AXTIME after UtoO Fail BSC6900 O(Optional) One of the parameters that
allowed. 113201
Cell
to ULGeneral
subcell OverLoad
handover Thred".
determine the coverage of the OL
Otherwise,
successfully, if the traffic
MS cannot volume bein
subcell and of the UL subcell.
SET the UL subcell
handed over toisthe smaller than "En
OL subcell
"UtoO HO Received Level
UTOOHOPE Penalty Time of GCELLHOIU Iuo
againOut Cell General
within the valueOverLoad of the GBFD-
Threshold", "OtoU HO Received
NTIME UtoO HO BSC6900 O(Optional) Thred",
parameter. the timer stops, and 113201
Level Threshold",
hierarchical handovers are not
"ReceiveQualThrshAMRFR", "TA
performed.
UtoO HO SET Threshold", and "TA Hysteresis"
If this parameter is set to NO, the
Received Level GCELLHOIU determine the coverage of the OL GBFD-
traffic volume in the UL subcell is
UTOORECTH Threshold BSC6900 O(Optional) subcell and UL subcell. 113201
not taken into account for
triggering the UL subcell to OL
SET subcell handover or the OL subcell
UTOOTRAFH UtoO Traffic HO GCELLHOIU to UL subcell handover in an GBFD-
OALLOW Allowed BSC6900 O(Optional) enhanced concentric cell. 113201
requests at the same time and the
load on the BSC increases in a
short time. Thus, congestion may
occur in the target cell and call
drops may be caused. Through the
hierarchical load handover
algorithm, the calls in the cell are
handed over to the OL subcell by
SET level. This parameter indicates the
UTRAFHOPE Underlay HO GCELLHOIU duration lasts by each level of GBFD-
RIOD Step Period BSC6900 O(Optional) handover. 113201
ADD
ETHMA(Mand GBFD-
VLANID VLAN ID BSC6900 atory) VLAN of the MA in the MD 118630
SET
BTSVLAN(Op GBFD-
VLANID VLAN ID BSC6900 tional) VLAN ID of the service type 118601
GBFD-
ADD VLAN to which the maintenance 118630
BTSETHMA( association belongs in the MRFD-
VLANID VLAN ID BSC6900 Mandatory) maintenance domain. 210301
ADD
VLAN ID of First SCTPLNK(Ma
VLANID1 Local IP address BSC6900 ndatory) VLAN ID of first Local IP address None
VLAN ID of ADD
Second Local IP SCTPLNK(Ma VLAN ID of second Local IP
VLANID2 address BSC6900 ndatory) VLAN
address priority level of the service None
type. This parameter helps to
determine the packet service
SET
priority level at the data link layer
DSCPMAP(O
on the Ethernet. If this parameter
VLANPRI VLAN Priority BSC6900 ptional) VLAN priority None
is set to 0, the service type has the
highest VLAN priority level. If this
SET parameter is set to 7, the service
BTSVLAN(Op type has the lowest VLAN priority GBFD-
VLANPRI VLAN Priority BSC6900 tional) level. 118601
SET
VLANSWITC BTSVLAN(Op GBFD-
H VLAN Switch BSC6900 tional) VLAN switch for the service type 118601
SET
GCELLCCAC
CESS(Option MRFD-
VOICEVER Speech Version BSC6900 al) Speech version supported by a cell 210301
ADD
WATER_MAS Enable Water EMU(Optional MRFD-
K Alarm Reporting BSC6900 ) Water sensor alarm switch 210304
Whether to limit the operation GBFD-
weekday of the operator. If the 111203
ADD weekday needs to be limited, see MRFD-
WEEK Week Limit BSC6900 OP(Optional) the description of "Week". 210305
SET
MSP(Optional GBFD-
WTRT WTR Time[Sec] BSC6900 ) Wait to restore time 111701
SET MRFD-
ZONET TimeZone BSC6900 TZ(Optional) Time zone 210301
Feature Name Value Type GUI Value Range
Actual Value RangeUnit Default Value
Recommended Value
Impact
Assignment
and
Immediate
Assignment Interval Type 0~70 0~70 None 50 50 Cell
Assignment
and
Immediate
Assignment Interval Type 0~70 0~70 None 50 50 Cell
Assignment
and
Immediate 1~8,
Assignment Interval Type 10~80 step:0.1 s 40 40 Cell
IDLETSALLOC
_0(Any idle
TRUE(Support)
Abis Enumeration timeslots under
, FALSE(Not TRUE,
Bypass Type the same site),
Support) FALSE None 0 0 BTS
IDLETSALLOC
_1(Idle
timeslots on
GSM Flow Enumeration NO(No),
same E1
Control Type YES(Yes)
primary link NO, YES None YES YES Cell
preferred),
IDLETSALLOC
GSM Flow _2(Idle
Control Interval Type timeslots
10~255 on 10~255 s 30 30 BSC
same E1
primary link IDLETSAL
only), LOC_0,
GSM Flow
IDLETSALLOC IDLETSAL
Control Interval Type 10~255 10~255 s 60 60 BSC
_3(Idle LOC_1,
timeslots on IDLETSAL
same 64K LOC_2,
Enumeration primary link IDLETSAL IDLETSALL IDLETSALL
EGPRS Type only) LOC_3 None OC_O OC_O BTS
CLOSE(CLOSE
Enumeration ), CLOSE,
EGPRS Type OPEN(OPEN) OPEN None CLOSE CLOSE BTS
BTS Local
Switch Interval Type 0~100 0~100 per cent 90 90 BSC
Enumeration NO(NO),
Flex Abis Type YES(YES) NO, YES None NO NO BTS
PDCH
Dynamic
Adjustment Interval Type 10~3600 10~3600 s 15 15 Cell
It is
recommend
ed that the
GSM_PHASE_ GSM_PHA value of this
1, SE_1, parameter is
Configurati GSM_PHASE_ GSM_PHA the same as
on 2, SE_2, that for "A
Manageme Enumeration GSM_PHASE_ GSM_PHA GSM_PHAS Interface
nt Type 2Plus SE_2Plus None E_2 Tag". BSC
Soft-
Synchroniz
ed Network Interval Type 1~255 1~255 None 40 40 BSC6900
Voice
Quality
Index
(Uplink
VQI) Interval Type 0~250 0~250 None 100 100 BSC
OSubcell(Overl
Access Interval Type 0~65535 0~65535 None 0 0 Cell
aid subcell),
USubcell(Under
laid subcell), OSubcell,
Concentric Enumeration NoPrefer(No USubcell,
Adaptive ULPRIORITY(U ULPRIORI
Cell Type preference) NoPrefer None Usubcell Usubcell Cell
Adjustment plink Priority), TY,
of Uplink NEUTRAL(Neut NEUTRAL
and ral Priority), ,
Downlink Enumeration DLPRIORITY(D DLPRIORI
Channels Type ownlink Priority) TY None NEUTRAL NEUTRAL Cell
Abis IP
over E1/T1 Disable(Disable
A IP over Enumeration ), Disable,
E1/T1 Type Enable(Enable) Enable None Enable Enable PPP link
4_75KBIT/ 4_75KBIT/S
Abis IP Enumeration NO(No), S, 4_75KBIT/S- -
over E1/T1 Type YES(Yes) NO, YES
5_15KBIT/ None YES
1&5_15KBIT/ YES
1&5_15KBIT BTS
BSS S, S- /S-
Paging 5_90KBIT/ 0&5_90KBIT/ 0&5_90KBIT
Coordinatio Enumeration CLOSE(Close), S, CLOSE, S- /S-
n Type OPEN(Open) 6_70KBIT/
OPEN None 1&6_70KBIT/
CLOSE 1&6_70KBIT
CLOSE BSC
COMPUL0(Co
S, S- /S-
mpulsory 0), COMPUL0
4_75KBIT/S~0 7_40KBIT/ 0&7_40KBIT/ 0&7_40KBIT
Basic Cell COMPUL1(Co ,
5_15KBIT/S~1 S, S- /S-
Re- Enumeration mpulsory 1), COMPUL1
5_90KBIT/S~2 7_95KBIT/ 1&7_95KBIT/ 1&7_95KBIT
selection Type FLEX(Flexible) , FLEX None FLEX FLEX Cell
6_70KBIT/S~3 S, S- /S-
7_40KBIT/S~4 10_2KBIT/ 0&10_2KBIT/ 0&10_2KBIT
7_95KBIT/S~5 S, S- /S-
10_2KBIT/S~6 12_2KBIT/ 0&12_2KBIT/ 0&12_2KBIT
AMR FR Bit Field Type 12_2KBIT/S S None S-1 /S-1 Cell
S, 4_75KBIT/S- -
5_15KBIT/ 1&5_15KBIT/ 1&5_15KBIT
S, S- /S-
5_90KBIT/ 0&5_90KBIT/ 0&5_90KBIT
S, S- /S-
4_75KBIT/S~0 6_70KBIT/ 1&6_70KBIT/ 1&6_70KBIT
5_15KBIT/S~1 S, S- /S-
5_90KBIT/S~2 7_40KBIT/ 0&7_40KBIT/ 0&7_40KBIT
6_70KBIT/S~3 S, S- /S-
7_40KBIT/S~4 7_95KBIT/ 1&7_95KBIT/ 1&7_95KBIT
6_60KBIT/S
AMR HR Bit Field Type 7_95KBIT/S S None S-0 /S-0 Cell
6_60KBIT/S- -
1&8_85KBIT/ 1&8_85KBIT
6_60KBIT/S, S- /S-
8_85KBIT/S, 1&12_65KBI 1&12_65KBI
WB AMR Bit Field Type 12_65KBIT/S 0~7 None T/S-1 T/S-1 Cell
Enumeration NO(No),
Call Control Type YES(Yes) NO, YES None NO NO Cell
Soft-
Synchroniz
ed Network Interval Type 1~255 1~255 min 10 10 BSC6900
O&M of
BTS Interval Type 60~300 60~300 V 180 180 BTS
61.0~300.
O&M of 0 (step:
BTS Interval Type 610~3000 0.1) V 2800 2800 BTS
60.0~299.
O&M of 0 (step:
BTS Interval Type 600~2990 0.1) V 1800 1800 BTS
O&M of
BTS Interval Type 60~300 60~300 V 280 280 BTS
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
O&M of
BTS Interval Type 0~254 0~254 None None None BTS
GSM Flow
Control Interval Type 0~50 0~50 ms 0 0 BSC
GSM Flow
Control Interval Type 0~768 0~768 None 2 2 BSC
0(Not support
A Interface dynamic
Protocol adjustment), 1~167772
Process Interval Type 1(According
1~16777215to 15 None None None BSC6900
downlink quality
BYMANUAL(By
measurements
Soft- Manual), BYMANU
reported by
Synchroniz Enumeration BYAUTO(By AL,
MS),
ed Network Type Auto) BYAUTO None BYAUTO None BSC6900
Dynamicall 2(According to
y Adjusting uplink quality
the Uplink measurements
MCS Enumeration COMMON_DL
reported by
Coding Type D(Common
BTS) 0, 1, 2 None 2 2 Cell
Download),
QUICK_DLD1(
Quick
O&M of Enumeration OFF(OFF),
Download No COMMON
BTS Type ON(ON) OFF, ON None OFF OFF BTS
Traffic), _DLD,
QUICK_DLD2( QUICK_D
Quick LD1,
O&M of Enumeration Download QUICK_D
BTS Type Reserve BCCH) LD2 None None None BTS
LOCK(Lock),
UNLOCK(Unloc
k), Lock,
O&M of Enumeration SHUTDOWN(S Unlock,
BTS Type hutdown) Shutdown None UNLOCK UNLOCK Cell
Lock(Lock),
Unlock(Unlock), Lock,
O&M of Enumeration Shutdown(Shut Unlock,
BTS Type down) Shutdown None Unlock Unlock TRX
Lock(Lock),
Unlock(Unlock), Lock, Current
O&M of Enumeration Shutdown(Shut Unlock, BFD
BTS Type down) Shutdown None Unlock Unlock session
Soft-
Synchroniz Compound hour{0~23}
ed Network Type hour, min min{0~59} None None None BSC6900
Soft-
Synchroniz
ed Network Interval Type 0~100 0~100 None 10 10 BSC6900
Soft-
Synchroniz Enumeration OFF(OFF),
ed Network Type ON(ON) OFF, ON None OFF OFF BSC6900
Soft-
Synchroniz Compound hour{0~23}
ed Network Type hour, min min{0~59} None None None BSC6900
Faulty
Manageme Enumeration RATIORULE(R RATIORU
nt Type atio Rule) LE None None None BTS
O&M of 1~51
BTS String Type None characters None None None BTS
O&M of 1~51
BTS String Type None characters None None None BTS
Acoustic
Echo
Cancellatio
n(AEC) Interval Type 0~600 0~600 ms 400 400 Board
Acoustic
Echo
Cancellatio
n(AEC) Interval Type 0~60 0~60 dB 20 20 Board
Acoustic
Echo
Cancellatio
n(AEC) Interval Type -60~-35,0 -60~-35, 0 dBm -48 -48 Board
Acoustic
Echo
Cancellatio
n(AEC) Interval Type 0~1000 0~1000 ms 0 0 Board
Acoustic
Echo
Cancellatio
n(AEC) Interval Type 0~15 0~15 dB 6 6 Board
Acoustic
Echo 4_Times,
Cancellatio Enumeration CLOSE(Close),
8_Times, CLOSE,
n(AEC) Type OPEN(Open)
12_Times, OPEN None CLOSE CLOSE Board
Acoustic 16_Times,
Echo 20_Times,
Cancellatio 24_Times,
n(AEC) Interval Type 28_Times,
10~100 10~100 None 20 20 Board
32_Times,
Acoustic
36_Times,
Echo
40_Times,
Cancellatio
44_Times,
n(AEC) Interval Type 1~10 1~10 s 4 4 Board
48_Times,
52_Times,
AMR 56_Times, 1920~307
Wireless Enumeration 60_Times, 20,
Link Timer Type 64_Times step:480 ms 64_Times 64_Times Cell
AMR 4_Times,
Wireless 8_Times, 0~30240,
Link Timer Interval Type 0~63
12_Times, step:480 ms 48 48 Cell
16_Times,
20_Times,
24_Times,
None Interval Type 28_Times,
0~65534 0~65534 None None None None
32_Times,
36_Times,
40_Times,
Enumeration
44_Times,
None Type BSC(BSC) BSC None None None Board
48_Times,
52_Times,
AMR 56_Times, 1920~307
Wireless Enumeration 60_Times, 20,
Link Timer Type 64_Times step:480 ms 52_Times 52_Times Cell
AMR
Wireless 0~30240,
Link Timer Interval Type 0~63 step:480 ms 32 32 Cell
Faulty
Manageme 65334~65
nt Interval Type 65334~65383 383 None None None None
Faulty
Manageme
nt Interval Type 1~65535 1~65535 None None None None
Faulty
Manageme
nt Interval Type 1~65535 1~65535 None None None BSC6900
Faulty
Manageme
nt Interval Type 1~65535 1~65535 None None None BSC6900
Faulty
Manageme
nt Interval Type 1~65535 1~65535 None None None BSC6900
O&M of 65033~65
BTS Interval Type 65033~65533 533 None None None BTS
Faulty
Manageme 1~1024
nt String Type None characters None None None BTS
TRX
Cooperatio
n Interval Type 1~60 1~60 min 15 15 Cell
GSM Flow
Control Interval Type 0~100 0~100 per cent 5 5 BSC
GSM Flow
Control Interval Type 0~100 0~100 per cent 5 5 BSC
GSM Flow
Control Interval Type 0~100 0~100 per cent 5 5 BSC
GSM Flow
Control Interval Type 0~100 0~100 per cent 10 10 BSC
GSM Flow
Control Interval Type 0~100 0~100 per cent 10 10 BSC
NO(Not
Supported),
R3(Only R3
GSM Flow
Supported),
Control Interval Type 0~100 0~100 per cent 10 10 BSC
R2(Only R2
Supported),
R2ANDR3(R2 NO, R3,
Enumeration And R3 R2,
A over IP Type Supported) R2ANDR3 None None NO BSC
Automatic
Level
Control
(ALC) Interval Type -12~12 -12~12 dB 6 6 Board
Automatic
Level
Control
(ALC) Interval Type -23~-4 -23~-4 dBm -18 -18 Board
Automatic
Level
Control
(ALC) Interval Type 3~12 3~12 dB 6 6 Board
Automatic
Level
Control
(ALC) Interval Type -23~-4 -23~-4 dBm -4 -4 Board
Automatic
Level
FIXEDLEVEL(F
Control
ixed level FIXEDLEV
(ALC) Interval Type -23~-4 -23~-4 dBm -23 -23 Board
mode), EL,
Automatic ADAPTIVE(Ada ADAPTIV
Level ptive mode), E,
Control Enumeration FIXEDGAIN(Fix FIXEDGAI
(ALC) Type ed gain mode) N None FIXEDGAIN FIXEDGAIN Board
Automatic
Level
Control Enumeration CLOSE(Close), CLOSE,
(ALC) Type OPEN(Open) OPEN None CLOSE CLOSE Board
Gb Over
FR Interval Type 5~15 5~15 None 5 5 BSC
Gb Over
FR Interval Type 1~255 1~255 s 3 3 BSC
Transmissi
on
0~400000 resource
IP QOS Interval Type 0~4000000 0 kbit/s None None group
NOTALLOW(No
Enumeration t Allow), NOTALLO
GPRS Type ALLOW(Allow) W, ALLOW None ALLOW ALLOW BSC
PDCH
Dynamic Enumeration OFF(OFF),
Adjustment Type ON(ON) OFF, ON None OFF OFF Cell
Enhanced
Channel
Assignment
Algorithm Interval Type 0~100 0~100 per cent 100 100 Cell
Extended
Dynamic NOTALLOW(No
Allocation(E Enumeration t Allow), NOTALLO
DA) Type ALLOW(Allow) W, ALLOW None NOTALLOW NOTALLOW BSC
Network-
Controlled
Cell
Reselection
(NC2) Interval Type 0~16 0~16 None 4 4 Cell
Enhanced
Channel
Assignment
Algorithm Interval Type 0~100 0~100 per cent 100 100 Cell
ALLCIC(Set all
A Interface Timeslots CIC),
Circuit ALLNULL(Set
Manageme Enumeration all Timeslots ALLCIC,
nt Type Null) ALLNULL None None ALLCIC E1/T1 link
ALLCIC(Set all
Timeslots CIC),
ALLNULL(Set
O&M of Enumeration all Timeslots ALLCIC,
BSC Type Null) ALLNULL None ALLCIC ALLCIC PBE1T1
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 30 30 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 30 30 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 30 30 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 30 30 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 30 30 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 30 30 BTS
Faulty
Manageme
nt Interval Type 0~65535 0~65535 s None None BTS
Faulty
Manageme Enumeration NO(NO),
nt Type YES(YES) NO, YES None YES YES BTS
Faulty
Manageme
nt Interval Type 0~65534 0~65534 None None None BTS
Faulty
Manageme
nt Interval Type 0~65535 0~65535 None None None BTS
Faulty
Manageme
nt Interval Type 0~15 0~15 mA 10 10 BTS
Faulty
Manageme
nt Interval Type 45~155 45~155 mA 100 100 BTS
Faulty
Manageme
nt Interval Type 125~175 125~175 mA 150 150 BTS
Faulty
Manageme
nt Interval Type 0~65535 0~65535 s None None BTS
Faulty
Manageme
nt Interval Type 0~100 0~100 per cent 0 0 BTS
Faulty
Manageme
nt Interval Type 0~100 0~100 per cent 0 0 BTS
Faulty
Manageme
nt Interval Type 0~250 0~250 None 0 0 BTS
Faulty
Manageme
nt Interval Type 0~250 0~250 None 0 0 BTS
Faulty
Manageme Enumeration NO(NO),
nt Type YES(YES) NO, YES None NO NO BTS
Faulty flt(Fault),
Manageme Enumeration evt(Event),
0(0.0), 1(0.1),
nt Type all(All) flt, evt, all None all all BSC6900
2(0.2), 3(0.3),
4(0.4), 5(0.5),
6(0.6), 7(0.7), 0, 1, 2, 3,
Power Enumeration 8(0.8), 9(0.9), 4, 5, 6, 7,
Control Type 10(1.0) 8, 9, 10 None 6 6 Cell
BSS-Based
LCS (Cell 0~0.9,
ID + TA) Interval Type 0~9 step:0.1 m 0 0 Cell
-
1000~100
None Interval Type -1000~10000 00 m None None BSC6900
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~6553 0~6553 m 40 40 Cell
-
3281~328
None Interval Type -3281~32810 10 feet None None BSC6900
Critical,
Faulty Major,
Manageme Critical, Major, Minor,
nt Bit Field Type Minor, Warning Warning None None None BSC6900
Critical(Critical),
Major(Major), Critical,
Faulty Minor(Minor), Major,
Manageme Enumeration Warning(Warnin Minor,
nt Type g) Warning None None None BSC6900
DISABLED(Dis
abled), DISABLE
O&M of Enumeration ENABLED(Ena D,
BTS Type bled) ENABLED None DISABLED DISABLED BTS
DISABLED(Dis
abled), DISABLE
O&M of Enumeration ENABLED(Ena D,
BTS Type bled) ENABLED None DISABLED DISABLED BTS
DISABLED(Dis
abled), DISABLE
O&M of Enumeration ENABLED(Ena D,
BTS Type bled) ENABLED None DISABLED DISABLED BTS
DISABLED(Dis
abled), DISABLE
O&M of Enumeration ENABLED(Ena D,
BTS Type bled) ENABLED None DISABLED DISABLED BTS
DISABLED(Dis
abled), DISABLE
O&M of Enumeration ENABLED(Ena D,
BTS Type bled) ENABLED None DISABLED DISABLED BTS
DISABLED(Dis
abled), DISABLE
O&M of Enumeration ENABLED(Ena D,
BTS Type bled) ENABLED None DISABLED DISABLED BTS
AMR Power
Control Interval Type 0~7 0~7 None 0 0 Cell
AMR Power
TCH:480~
Control Interval Type 0~7 0~7 None 3 3 Cell
9600,
step:480;
SDCCH:4
AMR Power 70~9400,
Control Interval Type 1~20 step:470 ms 5 5 Cell
AMR Power
Control Interval Type 0~7 0~7 None 2 2 Cell
AMR Power
Control Interval Type 0~63 0~63 dB 8 8 Cell
AMR Power
Control Interval Type 0~63 0~63 dB 33 33 Cell
AMR Power
Control Interval Type 0~63 0~63 dB 25 25 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 2 2 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 20 20 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 1 1 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 100 100 Cell
HUAWEI II
Handover Interval Type 0~7 0~7 None 0 0 Cell
HUAWEI II
Handover Interval Type 0~100 0~100 per cent 75 75 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 4 4 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 108 108 Cell
HUAWEI II
Handover Interval Type 0~7 0~7 None 3 3 Cell
HUAWEI II
Handover Interval Type 0~100 0~100 per cent 15 15 Cell
AMR Power
Control Interval Type 0~32 0~32 dB 8 8 Cell
AMR Power
Control Interval Type 0~30 0~30 dB 2 2 Cell
AMR Power
Control Interval Type 0~30 0~30 dB 0 0 Cell
AMR Power
Control Interval Type 0~30 0~30 dB 0 0 Cell
AMR Power
Control Interval Type 0~32 0~32 dB 8 8 Cell
AMR Power
Control Interval Type 0~4 0~4 dB 4 4 Cell
Enhanced
Power
Control
Algorithm Interval Type 0~15 0~15 None 0 0 Cell
Enumeration OFF(Off),
AMR HR Type ON(On) OFF, ON None ON ON Cell
AMR
AMR HR Interval Type 0~99 0~99 per cent 55 55 Cell
Coding
Rate
Threshold
Adaptive Enumeration NO(No),
TCH:480~
Adjustment Type YES(Yes) NO, YES None NO NO Cell
9600,
step:480;
SDCCH:4
AMR Power 70~9400,
Control Interval Type 1~20 step:470 ms 5 5 Cell
AMR Power
Control Interval Type 0~3 0~3 None 0 0 Cell
AMR Power
Control Interval Type 0~7 0~7 None 0 0 Cell
AMR Power
Control Interval Type 0~7 0~7 None 3 3 Cell
TCH:480~
9600,
step:480;
SDCCH:4
AMR Power 70~9400,
Control Interval Type 1~20 step:470 ms 5 5 Cell
AMR Power
Control Interval Type 0~7 0~7 None 3 3 Cell
AMR Power
Control Interval Type 0~63 0~63 dB 6 6 Cell
AMR Power
Control Interval Type 0~63 0~63 dB 30 30 Cell
AMR Power
Control Interval Type 0~63 0~63 dB 18 18 Cell
A Interface
Circuit
Manageme
nt Interval Type 0~65535 0~65535 None 2 2 BSC
A Interface
Circuit
Manageme
nt Interval Type 0~65535 0~65535 None 2 2 MSC
Automatic
Noise
Restraint
(ANR) Interval Type 3~30 3~30 dB 6 6 Board
Automatic
Noise
Restraint Enumeration CLOSE(Close), CLOSE,
(ANR) Type OPEN(Open) OPEN None CLOSE CLOSE Board
Automatic
Noise
Restraint
(ANR) Interval Type 10~30 10~30 dB 12 12 Board
Remote
Electrical 1~5
Tilt String Type None characters None None None None
Adjacent
IP QOS Interval Type 0~4599 0~4599 None None None node
None Interval Type 0~4599 0~4599 None None None IP path
Faulty
Manageme 1~100
MODE0(Mode
nt String Type None characters None None None BSC6900
0),
Automatic MODE1(Mode
Noise 1), MODE0,
Restraint Enumeration MODE2(Mode MODE1,
(ANR) Type 2) MODE2 None MODE0 MODE0 Board
Automatic
Noise
Restraint
(ANR) Interval Type -32~0 -32~0 dB -13 -13 Board
Automatic
Noise
Restraint
(ANR) Interval Type -64~0 -64~0 dB -48 -48 Board
Automatic
Noise
Restraint Enumeration CLOSE(Close), CLOSE,
(ANR) Type OPEN(Open) OPEN None CLOSE CLOSE Board
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~360 0~360 degree 360 None Cell
BTS GPS
Synchroniz
ation Interval Type 0~1000 0~1000 m 0 0 BTS
SENDPOWER( SENDPO
BTS GPS Send Power), WER,
Synchroniz Enumeration NOPOWER(No NOPOWE
ation Type Power) R None NOPOWER NOPOWER BTS
Abis IP
over E1/T1
A IP over Enumeration OFF(OFF),
E1/T1 Type ON(ON) OFF, ON None OFF OFF Board
Remote
Electrical
Tilt Interval Type 0~35 0~35 None None None None
O&M of Enumeration
BTS Type A(A), B(B) A, B None None None TRX
Multi-site Enumeration
Cell Type A(A), B(B) A, B None None None TRX
A Interface
Protocol
Process Interval Type 0~335 0~335 None None None MTP3 link
Ethernet
None Interval Type 3~10 3~10 None 3 3 port
Ethernet
None Interval Type 3~10 3~10 ms 3 3 port
A Interface
Protocol
Process Interval Type 0~27 0~27 None None None MTP3 link
A Interface
Protocol ATERCON
Process Interval Type 0~27 0~27 None None None SL
power(Power
System),
env(Environme
nt System),
sig(Signaling
System),
power,
trunk(Trunk
env, sig,
A Interface System),
trunk,
Protocol hardware(Hard
power, env, sig, hardware,
Process Interval Type ware
0~11 System), 0~11 None None None MTP3 link
trunk, software,
software(Softw power,
hardware, run,
are System), env, sig,
Faulty software, run, comm,
run(Running trunk,
Manageme comm, service, service,
System), hardware,
nt Bit Field Type handle handle None None None BSC6900
comm(Commun software,
ication System), run,
Faulty service(QoS), comm,
Manageme Enumeration handle(Process service,
nt Type ing Error) handle None None None BSC6900
Assignment
and
Immediate Enumeration OFF(Off),
Assignment Type ON(On) OFF, ON None OFF OFF Cell
DISABLE(Disab
le),
Enumeration ENABLE(Enabl DISABLE,
Direct Retry Type e) ENABLE None DISABLE DISABLE Cell
Concentric
Cell Interval Type 0~61 0~61 dB 35 35 Cell
O&M of
BTS Interval Type 0~62,255 0~62, 255 None None None BTS
O&M of
BTS Interval Type 0~62 0~62 None None None BTS
O&M of
BTS Interval Type 0~23,255 0~23, 255 None None None BTS
O&M of
BTS Interval Type 0~23 0~23 None None None BTS
O&M of
BTS Interval Type 0~255 0~255 None None None BTS
O&M of
BTS Interval Type 0~254 0~254 None None None BTS
2G/3G
Neighborin
g Cell
Automatic
Optimizatio
n Interval Type 0~63 0~63 dB 30 30 BSC
Assignment
and
Immediate 500~6000
Assignment Interval Type 500~60000 0 ms 10000 10000 Cell
O&M of
BSC Interval Type 1~300 1~300 s 30 30 BSC
A Interface
Circuit
Manageme
nt Interval Type 1~300 1~300 s 60 60 MSC
GSM Flow
Control Interval Type 1~300 1~300 s 30 30 BSC
GSM Flow
Control Interval Type 1~300 1~300 s 60 60 MSC
O&M of
BSC Interval Type 1~300 1~300 s 30 30 BSC
O&M of
BSC Interval Type 1~300 1~300 s 30 30 BSC
A Interface
Circuit
Manageme
nt Interval Type 1~300 1~300 s 20 20 MSC
Enhanced
Dual-Band
Network Interval Type 0~63 0~63 dB 2 2 Cell
Enhanced
Dual-Band
Network Interval Type 0~63 0~63 dB 10 10 Cell
TS1, TS2,
TS3, TS4,
TS5, TS6,
Enumeration NO(No), TS7, TS8,
Flex Ater Type YES(Yes) NO,
TS9,YES None YES YES BSC
TS10,
TS11,
Enumeration Close(Close), TS12,
Close,
Flex Ater Type Open(Open) TS13,
Open None Open Open BSC
TS14,
TS15,
TS16,
TS17,
Flex Ater Interval Type 80~100
TS1, TS2, TS3, 80~100
TS18, per cent 85 85 BSC
TS4, TS5, TS6, TS19,
TS7, TS8, TS9, TS20,
O&M of TS10, TS11, TS21,
BSC Interval Type TS12,
0~254 TS13, TS22,
0~254 None None None MTP3 link
TS14, TS15, TS23,
TS16, TS17, TS24,
TS18, TS19, TS25,
BSC Local
TS20, TS21, TS26,
Switch Interval Type 0~100 0~100 per cent 90 90 BSC
TS22, TS23, TS27,
TS24, TS25, TS28,
TS26, TS27, TS29,
O&M of TS28, TS29, TS30,
BSC Bit Field Type TS30, TS31 TS31 None None None E1/T1 link
Semi-
Permanent Enumeration
Connection Type NO, YES NO, YES None None None BSC
Configurati
on
Manageme
nt Interval Type 0~1 0~1 None None None E1/T1 link
Configurati
on
Manageme
nt Interval Type 0~254 0~254 None None None E1/T1 link
O&M of ATERCON
BSC Interval Type 0~2047 0~2047 None None None SL
Ater
Compressio
n
Transmissio Enumeration TDM(TDM),
n Type IP(IP) TDM, IP None TDM TDM BSC
A(Tributary A),
B(Tributary B),
O&M of Enumeration ALL(All
BTS Type Tributary) A, B, ALL None None None None
TS10, TS11, TS21,
TS12, TS13, TS22,
TS14, TS15, TS23,
TS16, TS17, TS24,
TS18, TS19, TS25,
TS20, TS21, TS26,
TS22, TS23, TS27,
TS24, TS25, TS28,
A Interface TS26, TS27, TS29,
Protocol TS28, TS29, TS30,
Process Bit Field Type TS30, TS31 TS31 None None None MTP3 link
O&M of
BTS Interval Type 0~15 0~15 dB 0 0 BTS
O&M of
BTS Interval Type 0~15 0~15 dB 0 0 BTS
SERVER(Serve
Abis IP Enumeration r), SERVER,
over E1/T1 Type CLIENT(Client) CLIENT None None None BTS
Abis IP
over E1/T1
A IP over 1~63
E1/T1 String Type None characters None None None PPP link
Abis IP
over E1/T1
A IP over 1~63
E1/T1 String Type None characters None None None MP group
Abis IP 1~64
over E1/T1 String Type None characters None None None BTS
Abis IP
over E1/T1
A IP over 1~15
E1/T1 String Type None characters None None None PPP link
Abis IP
over E1/T1
A IP over 1~15
E1/T1 String Type None characters None None None MP group
Abis IP 1~16
over E1/T1 String Type None characters None None None BTS
NO_V(NO_V),
Abis IP PAP_V(PAP_V)
over E1/T1 , NO_V,
A IP over Enumeration CHAP_V(CHAP PAP_V,
E1/T1 Type _V) CHAP_V None NO_V NO_V PPP link
NO_V(NO_V),
Abis IP PAP_V(PAP_V)
over E1/T1 , NO_V,
A IP over Enumeration CHAP_V(CHAP PAP_V,
NO_V(No
E1/T1 Type _V) CHAP_V None NO_V NO_V MP group
Validate),
PAP_V(PAP
Validate), NO_V,
Abis IP Enumeration CHAP_V(CHAP PAP_V,
over E1/T1 Type Validate) CHAP_V None NO_V NO_V BTS
Enumeration NO(No),
AMR FR Type YES(Yes) NO, YES None YES YES Cell
Enumeration NO(No),
AMR HR Type YES(Yes) NO, YES None YES YES Cell
1~64
None String Type None characters None None None BTS
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None None
0.0.0.0~25
IP Address 5.255.255. Ethernet
None Type None 255 None None None port
BYTRX(Turn off
Active TRX),
Backup BYPWR(Reduc
Power Enumeration e Backup BYTRX,
BYCOVER(Cov
Control Type Power) BYPWR None BYTRX BYTRX BTS
er Priority),
Active BYCAP(Capabil BYCOVER
Backup ity Priority), , BYCAP,
Power Enumeration BYSAVING(Sav BYSAVIN
Control Type ing Priority) G None BYCOVER BYCOVER BTS
Multi-band
Sharing
One BSC Interval Type 0~1 0~1 None 1 1 Cell
Multi-band
Sharing
One BSC Interval Type 0~1 0~1 None 1 1 Cell
Multi-band
Sharing
One BSC Interval Type 0~1 0~1 None 1 1 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 1~200 1~200 s 20 20 Cell
O&M of 1~80
BTS String Type None characters None None None None
For
Soft-
EPS4815
Synchroniz
Battery1Temp( boards, the
ed Network Interval Type 0~2047 0~2047 None None None BSC6900
Battery 1 value of this
Temperature), Battery1Te parameter is
Battery2Temp( mp, always
O&M of Enumeration Battery 2 Battery2Te Battery1Tem "Battery1Te
Battery1Temp(
BTS Type Temperature) mp None p mp". BTS
Battery 1
Temperature), Battery1Te
Battery2Temp( mp,
O&M of Enumeration Battery 2 Battery2Te Battery1Tem Battery1Tem
BTS Type Temperature) mp None p p BTS
O&M of
BTS Interval Type 30~1000 30~1000 Ah 50 50 BTS
BSC Node
Redundanc 1024~655
y Interval Type 1024~65535 35 None 58000 58000 SCTP link
Processing
of
Measureme
nt Report
Pre-
processing
of
Measureme
nt Report Interval Type 0~254 0~254 None 8 8 TRX
O&M of
BTS Interval Type 0~3000 0~3000 Ah 36 36 BTS
Configurati
on
Manageme
nt Interval Type 0~7 0~7 None None None Cell
Configurati
on
Manageme
nt Interval Type 0~7 0~7 None None None Cell
Configurati
on
Manageme
nt Interval Type 0~7 0~7 None None None BTS
Configurati
on
Manageme
nt Interval Type 0~1023 0~1023 None None None Cell
Frequency
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Hopping
(RF
hopping,
baseband Enumeration NO_Hop(No NO_Hop,
hopping) Type hop), Hop(Hop) Hop None None None Cell
Gb Over
FR Interval Type 0~100 0~100 per cent 80 80 BSC
Gb Over
FR Interval Type 0~100 0~100 per cent 60 60 BSC
Gb Over
FR Interval Type 0~511 0~511 None None None BC
"APM30",
the
recommend
ed value is
"7". For
other Power
System
Type, the
recommend
O&M of ed value is
BTS Interval Type 5~25 5~25 per cent 15 "15". BTS
O&M of 43.3~57.6
BTS Interval Type 433~576 (step: 0.1) V 565 565 BTS
QoS
ARP&THP Interval Type 1~10 1~10 None 8 8 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 4 4 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 2 2 Cell
MTP3(MTP3),
M3UA(M3UA), MTP3,
A Interface MTP3_M3UA(M M3UA,
Protocol Enumeration TP3 and MTP3_M3
Process Type M3UA) UA None None None SCCP
BSC Node
Redundanc
y Interval Type 1~60 1~60 s 1 1 BSC
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 6 6 Cell
IP Fault
Detection Current
Based on BFD
BFD Interval Type 3~10 3~10 None 3 3 session
Processing
IP Fault
of
Detection Current
Measureme
Based on BFD
nt Report
BFD Interval Type 1~2 1~2 None None None session
Pre-
processing
of
Measureme
nt Report Interval Type 10~254 10~254 None 30 30 TRX
TRX
Cooperatio Enumeration ALL(All),
n Type PART(Part) ALL, PART None ALL ALL Cell
Soft- -
Synchroniz 10000~10
ed Network Interval Type -10000~10000 000 None None None BSC6900
QoS
ARP&THP Interval Type 1~10 1~10 None 4 4 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 2 2 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 1 1 Cell
DISABLE(Disab
Faulty le),
Manageme Enumeration ENABLE(Enabl DISABLE,
nt Type e) ENABLE None ENABLE None BSC6900
Faulty
Manageme
nt Interval Type 0~65534 0~65534 s 0 None BSC6900
Faulty
Manageme
nt Interval Type 60~65534 60~65534 s 900 None BSC6900
DISABLE(Disab
Faulty le),
Manageme Enumeration ENABLE(Enabl DISABLE,
nt Type e) ENABLE None ENABLE None BSC6900
Gb Over
FR Interval Type 1~6 1~6 None 4 4 BSC
Gb Over
FR Interval Type 1~120 1~120 s 10 10 BSC
Transport
None Interval Type 0~335 0~335 None None None channel
Transport
None Interval Type 0~5,8~27 0~5, 8~27 None None None channel
Transport
None Interval Type 0~11 0~11 None None None channel
GSM Flow
Control Interval Type 0~5000 0~5000 s 1000 1000 BSC
Abis IP
over E1/T1
A IP over Enumeration NO(NO),
E1/T1 Type YES(YES) NO, YES None None NO MP group
Faulty nonrpt(Not
Manageme Enumeration Report),
nt Type rpt(Report) nonrpt, rpt None None None BSC6900
0(0), 1(1), 2(2),
3(3), 4(4), 5(5), 0, 1, 2, 3,
O&M of Enumeration 6(6), 4, 5, 6,
BTS Type NULL(NULL) NULL None NULL NULL BTS
0(0), 1(1), 2(2),
3(3), 4(4), 5(5), 0, 1, 2, 3,
O&M of Enumeration 6(6), 4, 5, 6,
BTS Type NULL(NULL) NULL None NULL NULL BTS
DATU_MAIN, FMUA_MA
DDPM_MAIN, IN,
DDPU_MAIN, GATM_MA
DDRM_MAIN, IN,
DEMU_MAIN, GTMU_M
DFCU_MAIN, AIN,
DGPS_MAIN, IASU_MAI
HUAWEI I DHEU_MAIN, N,
Handover DOMU_MAIN, IOMU_MA
HUAWEI II Enumeration DPMU_MAIN,
NO(No), IN,
DPTU_MAIN, MFU_300
Handover Type YES(Yes) NO, YES None YES YES Cell
DRFU_MAIN, 1C,
DRFUBOOT_M MMU_300
AIN, 1C,
HUAWEI II DRRU_MAIN, 0.5~8,
MRRU_M
Handover Interval Type 1~16
DRRUBOOT_M step:0.5
AIN, s 1 1 Cell
HUAWEI I AIN, MTR_MAI
Handover DRU_MAIN, N,
HUAWEI II DTCU_MAIN, NFCB_MA
Handover Interval Type DTMU_MAIN,
0~127 IN,
0~127 dB 69 69 Cell
DTRU_MAIN, PBU_MAI
ETR_MAIN, N,
FMU_MAIN, QTRU_MA
HUAWEI II FMUA_MAIN, 0.5~8,
IN,
Handover Interval Type 1~16
GATM_MAIN, step:0.5
TMU_MAI s 1 1 Cell
Configurati GTMU_MAIN, N,
SCU,
on IASU_MAIN, TRX_MAI
GCU,
Manageme Enumeration IOMU_MAIN,
SCU, GCU, N,
XPU, INT,
nt Type MFU_3001C,
XPU, INT, TNU GRRU_M
TNU None None None None
MMU_3001C, SCU,
AIN,
Configurati MRRU_MAIN, GCU,
BTS3900B
on SCU, GCU,
MTR_MAIN, XPU,
_MAIN,
Manageme Enumeration XPU, DPU, INT,
NFCB_MAIN, DPU, INT,
BTS3900B
nt Type TNU
PBU_MAIN, TNU
BOOT_MA None None None None
Configurati QTRU_MAIN, IN,
INT, DPU,
on TMU_MAIN,
INT, DPU, XPU, MRFU_MA
XPU, TNU,
Manageme Enumeration TRX_MAIN,
TNU, OMU, IN,
OMU,
nt Type GRRU_MAIN,
SAU GRFU_MA
SAU None None None None
BTS3900B_MA IN,
IN, MRRUBO
BTS3900BBOO OT_MAIN,
O&M of T_MAIN, MRFUBO
BTS Interval Type 0~72
MRFU_MAIN, 0~72
OT_MAIN, None None None None
GRFU_MAIN, USCU_MA
MRRUBOOT_ IN,
O&M of MAIN, BTS3900E
BTS Interval Type MRFUBOOT_M
0~47 _MAIN,
0~47 None None None None
AIN, BTS3900E
USCU_MAIN, BOOT_MA
BTS3900E_MA IN,
O&M of 0~100000
IN, BOOTRO
BTS Interval Type 0~1000 (step: 100) kbit/s None None BTS
BTS3900EBOO M_PCK,
T_MAIN, UBRI_MAI
BOOTROM_PC N,
O&M of Enumeration K, UBRI_MAIN, UTRP_MA
BTS Type UTRP_MAIN IN None None None None
O&M of 0~100000
BTS Interval Type 0~1000 (step: 100) kbit/s None None BTS
EIUa,
OIUa,
POUc,
FG2c,
GOUc,
XPUa,
PEUa, FG2a, XPUb,
Configurati
GOUa, EIUa, DPUa,
on
OIUa, POUc, DPUb,
Manageme Enumeration DPUa,
FG2c, GOUc, DPUc,
nt Type DPUa, DPUc DPUc None None None Board
XPUa, XPUb, DPUd,
Configurati DPUa, DPUb, TNUa,
on DPUc, DPUd, OMUa,
Manageme Enumeration TNUa, OMUa, OMUb,
nt Type OMUb, SAUa SAUa None None None None
FG2a,
GOUa,
Enumeration FG2a, GOUa, FG2c, Ethernet
None Type FG2c, GOUc GOUc None None None port
Enumeration PEUa,
None Type PEUa, POUc POUc None None None BSC6900
TMU(TMU/DTM
U),
Enumeration DTRU(DTRU), PEUa,
None Type PEUa, POUc
DPTU(DPTU), POUc
TMU, None None None BSC6900
QTRU(QTRU), DTRU,
MRRU(MRRU), DPTU,
Enumeration GRRU(GRRU), QTRU,
PEUa,
None Type BTS3900B(BTS
PEUa, POUc MRRU,
POUc None None None BSC6900
MRRU,
3900B), GRRU,
GRRU,
MRFU(MRFU), BTS3900B
MRRU, GRRU, MRFU,
GRFU(GRFU), , MRFU,
O&M of Enumeration MRFU, GRFU, GRFU,
BTS3900E(BTS GRFU,
BTS Type BTS3900E BTS3900E None None None BTS
3900E), BTS3900E
DRFU(DRFU), , DRFU,
DRRU(DRRU), DRRU,
O&M of Enumeration UBRI(UBRI), UBRI,
BTS Type UTRP(UTRP) UTRP None None None None
Fast Ring
Network
Switch Interval Type 0~255 0~255 s 0 0 BTS
Simplified
Cell 1~80
Broadcast String Type None characters None Cell name None Cell
Simplified
Cell
Broadcast Interval Type 2~3600 2~3600 s 60 60 Cell
O&M of ENTIRE(Entire
BSC Backup),
Security INCREMENTAL ENTIRE,
Manageme Enumeration (Incremental INCREME INCREMENT
nt Type Backup) NTAL None AL None BSC6900
Radio
Common
Channel
Manageme
nt Interval Type 0~7 0~7 None 1 1 Cell
1~167772
A over IP Interval Type 1~16777215 15 None None None BSC
TRX Power
Amplifier
Intelligent Enumeration NO(No),
Shutdown Type YES(Yes) NO, YES None NO NO BSC
A Interface MAINBSC(MAI
Circuit N BSC),
Manageme Enumeration SUBBSC(SUB MAINBSC,
nt Type BSC) SUBBSC None None None E1/T1 link
Short
Message
Service Cell 0.0.0.0~25
Broadcast IP Address 5.255.255.
(TS23) Type None 255 None None None BSC
Soft-
Synchroniz Compound hour{0~23}
ed Network Type hour, min min{0~59} None None None BSC6900
Soft-
Synchroniz Compound hour{0~23}
ed Network Type hour, min min{0~59} None None None BSC6900
Adjacent
IP QOS Interval Type 0~15 0~15 None None None node
Configurati
on
Manageme
nt Interval Type 0~15 0~15 None None None Cell
Soft-
Synchroniz
ed Network Interval Type 5~60 5~60 d 5 5 BSC6900
Short
Message
Service Cell 0.0.0.0~25
Broadcast IP Address 5.255.255.
(TS23) Type None 255 None None None BSC
0.0.0.0~25
Abis over IP Address 5.255.255.
IP Type None 255 None None None BTS
UNCONDITION
ALSTART(Unco
nditional Start), UNCONDI
ATERCONGES TIONALST
TS(Start When ART,
Ater Congests), ATERCON
PREFIXNUMB GESTS, UNCONDITI
BSC Local Enumeration ER(Start by PREFIXN UNCONDITI ONALSTAR
Switch Type Prefix Number) UMBER None ONALSTART T BSC
Connection
Inter BSC 1~64
Enhanced
over IP String Type None characters None None None BSC
Multi Level
Precedence
and
Preemption Enumeration NO(No),
Enhanced
(EMLPP) Type YES(Yes) NO, YES None YES YES BSC
Multi Level
Precedence
and
Preemption Enumeration NO(No),
(EMLPP) Type YES(Yes) NO, YES None NO NO BSC
Semi-
Permanent
Connection Interval Type 0~335 0~335 None None None BTS
TRX
Cooperatio
Enhanced
n Interval Type 0~65535 0~65535 None None None BSC
Multi Level
Precedence
and
Preemption Enumeration NO(No),
Enhanced
(EMLPP) Type YES(Yes) NO, YES None YES YES BSC
Multi Level
Precedence
and
Preemption Enumeration NO(No),
Enhanced
(EMLPP) Type YES(Yes) NO, YES None YES YES BSC
Multi Level
Precedence
and
Preemption Enumeration NO(No),
(EMLPP) Type YES(Yes) NO, YES None NO NO BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 65535 65535 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 65535 65535 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 65535 65535 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 65535 65535 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 65535 65535 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 65535 65535 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 65535 65535 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 0 0 BSC
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 65535 65535 BSC
Semi-
Permanent
Connection Interval Type 0~27 0~27 None None None BTS
Semi-
Permanent
Connection Interval Type 0~11 0~11 None None None BTS
Semi-
Permanent
Connection Interval Type 0~7 0~7 None None None BTS
Soft-
Synchroniz
ed Network Interval Type 0~2500 0~2500 None None None BSC6900
TC Pool Interval Type 0~15 0~15 None None None E1/T1 link
Semi-
Permanent
Connection Interval Type 1~31 1~31 None None None BTS
O&M of 1~64
LOGICIP(Logic
BTS String Type None characters None None None BTS
IP),
PORTIP(Port
IP), LOGICIP,
Abis over Enumeration PPP/MP(PPP/ PORTIP,
IP Type MP) PPP/MP None LOGICIP LOGICIP BTS
O&M of 0~64
BTS String Type None characters None None None BTS
CLOSE(CLOSE
Abis over Enumeration ), CLOSE,
IP Type OPEN(OPEN) OPEN None CLOSE CLOSE BTS
Adjacent
IP QOS Interval Type 0~2047 0~2047 None None None node
O&M of
BTS Interval Type 0~2047 0~2047 None None None BTS
O&M of
BTS Interval Type 0~2047 0~2047 None None None BSC6900
Abis
Transmissio
n
Optimizatio
n Interval Type 0~2047 0~2047 None None None BTS
O&M of
BTS Interval Type 0~2047 0~2047 None None None None
BYIDX(By BTS
Soft- Index),
Synchroniz Enumeration BYNAME(By BYIDX,
ed Network Type BTS Name) BYNAME None None None BSC6900
Remote BYNAME(By
Electrical Enumeration Name), BYNAME,
Tilt Type BYID(By Index) BYID None None None None
Security
Manageme 0~2047,
nt Interval Type 0~2047,65535 65535 None None None BSC6900
UNCONDITION
ALSTART(Unco
0.0.0.0~25
nditional Start), UNCONDI
Abis over IP Address 5.255.255.
ABISCONGES TIONALST
IP Type None 255 None None None BTS
TS(Start When ART,
Abis Congests), ABISCON
PREFIXNUMB GESTS, UNCONDITI
BTS Local Enumeration ER(Start by PREFIXN UNCONDITI ONALSTAR
Switch Type Prefix Number) UMBER None ONALSTART T BSC
0.0.0.0~25
Abis over IP Address 5.255.255.
BSC_Preproce
IP Type None 255 None None None BTS
Pre- ssing(BSC
processing preprocessing), BSC_Prep
of BTS_Preproces rocessing,
Measureme Enumeration sing(BTS BTS_Prep BTS_Preproc BTS_Prepro
nt Report Type preprocessing) rocessing None essing cessing Cell
O&M of 1~64
BTS String Type None characters None None None BTS
Abis
Transmissio
n
Optimizatio 1~64
n String Type None characters None None None BTS
O&M of 1~2048
BTS String Type None characters None None None None
Fast Ring
Network
Switch Interval Type 10~255 10~255 s 60 60 BTS
Enumeration NO(NO),
A over IP Type YES(YES) YES, NO None NO NO SCTP link
Gb
Interface
Function Interval Type 2~65534 2~65534 None None None Cell
Gb
Interface
Function Interval Type 2~65534 2~65534 None None None Cell
Gb
Interface 1000~300
Function Interval Type 1000~3000 0 ms 1000 1000 BSC
IP logical
IP QOS Interval Type 100~1000 100~1000 per cent 120 120 port
FULL_DUPLEX FULL_DU Transmissi
(Full Duplex), PLEX, on
Enumeration HALF_DUPLEX HALF_DU resource
IP QOS Type (Half Duplex) PLEX None None None group
Processing
of
Measureme
IP logical
nt Report
IP QOS Interval Type 0~100 0~100 per cent 25 25 port
Pre-
processing
of
Measureme
nt Report Interval Type 20~100 20~100 per cent 80 80 TRX
Configurati BYIDX(By Cell
on Index),
Manageme Enumeration BYNAME(By BYIDX,
C31NOTUSE(N
nt Type Cell Name) BYNAME None None None BSC6900
ot Use c31
standard), C31NOTU
C31STANDAR SE,
Enumeration D(Use c31 C31STAN C31STANDA C31STAND
GPRS Type standard) DARD None RD ARD Cell
O&M of 1~200
BTS String Type None characters None None None BTS
O&M of
BTS Interval Type 0~8 0~8 None None None None
Configurati
on
Manageme Enumeration NO(NO),
nt Type YES(YES) NO, YES None None None None
may hang
up the
phone
before the
call is re-
established.
Generally,
the
Call recommend
Reestablish Enumeration NO(No), ed value is
ment Type YES(Yes) NO, YES None YES YES. Cell
O&M of
Frequency
BTS Interval Type 0~4095 0~4095 None None None None
Hopping
(RF
hopping, The CBA
baseband Enumeration NO(No), function
hopping) Type YES(Yes) NO, YES None YES applies
YES to Cell
Compact special
BTS scenarios. If
GSM900(GSM9
Automatic this
00),
Capacity Enumeration OFF(OFF), parameter is
DCS1800(DCS
Planning Type ON(ON) OFF, ON None None None
set to YES BTS
1800),
GSM850(GSM8 GSM900, and "Cell
50), DCS1800, Bar Qualify"
O&M of Enumeration PCS1900(PCS GSM850, is set to no,
BTS Type 1900) PCS1900 None GSM900 only
GSM900 BTS
NULL(NULL), handovers
IPLGCPORT(IP NULL, are allowed
Logic Port), IPLGCPO in a cell, and
Enumeration RSCGRP(Reso RT, direct
IP QOS Type urce Group) RSCGRP None NULL NULL
access of an IP path
ETHER,
ETHER, IPLOGICP MS is not
IPLOGICPORT, ORT, allowed.
Enumeration TRUNK, PPP, TRUNK, This IP logical
IP QOS Type MP PPP, MP None None condition
None port
applies to a
dual-network
coverage
Enumeration ETHPORT, ETHPORT,
cell. For a
None Type TRUNK TRUNK None None None None
Basic Cell common
Selection cell, this
Basic Cell parameter
Re- Enumeration NO(NO), should be
selection Type YES(YES) NO, YES None NO set to NO. Cell
Short
Message
Service Cell
Broadcast
(TS23) Interval Type 0~3 0~3 None None None BSC
Short
Message
Service Cell 0.0.0.0~25
Broadcast IP Address 5.255.255.
(TS23) Type None 255 None None None BSC
Short
Message
Service Cell
Broadcast
(TS23) Interval Type 0~63 0~63 None 30 30 BSC
Short
Message
Service Cell
Broadcast
(TS23) Interval Type 0~65535 0~65535 None None None BSC
Short
Message
Service Cell
Broadcast
(TS23) Interval Type 5~180 5~180 s 15 15 BSC
4500~327 IP logical
IP QOS Interval Type 4500~32767 67 byte 4500 4500 port
Short
Message
Service Cell
Broadcast
TCH:0~14
(TS23) Interval Type 1~5 1~5 s 3 3 BSC
Enhanced 880,
Measureme step:480;
nt SDCCH:0
Report(EM ~14570,
TCH:0~14
R) Interval Type 0~31 step:470 ms 2 2 Cell
Enhanced 880,
Measureme step:480;
nt SDCCH:0
Report(EM ~14570,
R) Interval Type 0~31 step:470 ms 6 6 Cell
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 86 None BSC
DISABLE(Disab
Security led),
Manageme Enumeration ENABLE(Enabl DISABLE,
nt Type ed) ENABLE None None None BSC6900
Radio
Common
Channel
Manageme
nt Interval Type 0~255 0~255 s 15 15 Cell
Radio
Common
Channel
Manageme
nt Interval Type 20~100 20~100 per cent 80 80 Cell
GSM/WCD
MA
Interoperabi
Direct Retry Interval Type 0~100 0~100 per cent 90 90 Cell
lity
GSM/TD-
GSM/WCD
SCDMA
MA
Interoperabi 0~42,
Interoperabi
lity Interval Type 0~7 step: 6 dB 0 0 Cell
lity
GSM/TD- 0~36,
SCDMA Positive
Interoperabi infinity,
lity Interval Type 0~7 step: 6 dB 0 0 Cell
Configurati
on
Manageme
nt Interval Type 0~1023 0~1023 None None None Cell
Configurati
on
Manageme Enumeration AUTO(Auto), AUTO,
nt Type MANU(Manu) MANU None None None Cell
Configurati
on
Manageme
nt Interval Type 0~1023 0~1023 None None None Cell
Configurati
on
Manageme Enumeration AUTO(Auto), AUTO,
nt Type MANU(Manu) MANU None None None Cell
GSM/WCD
MA
Power
Interoperabi
Control Interval Type 0~50 0~50 None 0 0 Cell
lity
GSM/TD-
GSM/WCD
SCDMA
MA
Interoperabi 0~42,
Interoperabi
lity Interval Type 0~7 step: 6 dB 0 0 Cell
lity
GSM/TD- 0~36,
SCDMA Positive
Interoperabi infinity,
lity Interval Type 0~7 step: 6 dB 0 0 Cell
Permit(Permit
Cell Access),
Enumeration NoPermit(Prohi Permit,
GPRS Type bit Cell Access) NoPermit None Permit Permit Cell
OUTDOOR_CE
LL(Outdoor OUTDOO
Cell), R_CELL,
O&M of Enumeration INDOOR_CELL INDOOR_ OUTDOOR_ OUTDOOR_
BTS Type (Indoor Cell) CELL None CELL CELL Cell
O&M of 24.0~28.9
BTS Interval Type 240~289 (step: 0.1) V 283 283 BTS
O&M of 43.3~57.6
BTS Interval Type 433~576 (step: 0.1) V 565 565 BTS
O&M of 24.0~28.9
BTS Interval Type 240~289 (step: 0.1) V 268 268 BTS
O&M of 43.2~57.5
BTS Interval Type 432~575 (step: 0.1) V 535 535 BTS
Configurati
on
Manageme
nt Interval Type 0~2047 0~2047 None None None Cell
Configurati
on
Manageme
nt Interval Type 0~2047 0~2047 None None None Cell
MBSC
Load
Balancing Interval Type 0~2047 0~2047 None None None Cell
Configurati
on
Manageme 0~2047,
nt Interval Type 0~2047,65535 65535 None None None Cell
Configurati
on
Manageme
nt Interval Type 0~2047 0~2047 None None None Cell
O&M of
2G/3G
BTS Interval Type 0~2047 0~2047 None None None Cell
Neighborin
g Cell
Automatic
Optimizatio 1~400
n String Type None characters None None None BSC
Configurati
on BYNAME(By
Manageme Enumeration name), BYNAME,
nt Type BYID(By index) BYID None None None Cell
Configurati
on BYNAME(By
Manageme Enumeration Name), BYNAME,
nt Type BYID(By Index) BYID None None None Cell
Remote BYNAME(By
Electrical Enumeration Name), BYNAME,
Tilt Type BYID(By Index) BYID None None None None
Enhanced
Dual-Band Enumeration Inner(Inner), Inner,
Network Type Extra(Extra) Extra None None None Cell
HUAWEI I
Handover
HUAWEI II Enumeration
Handover Type 1, 2, 3, 4 1, 2, 3, 4 None 3 3 Cell
Configurati
on
Manageme 0~5000
nt String Type None characters None None None Cell
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None NO NO MSC
SDCCH
Dynamic
Adjustment Interval Type 0~255 0~255 None 80 80 Cell
Configurati
on
Manageme 1~64
nt String Type None characters None None None Cell
MBSC
Load 1~64
Balancing String Type None characters None None None Cell
O&M of 1~64
BTS String Type None characters None None None Cell
Configurati
on
Manageme 0~5000
nt String Type None characters None None None Cell
OP1(Operator
1),
OP2(Operator
2),
OP3(Operator
Processing
3),
of
OP4(Operator OP1, OP2,
Measureme
RAN Enumeration 4), NONE(Not OP3, OP4,
nt Report
Sharing Type Shared) NONE None 255 255 Cell
Pre-
Processing
processing
of
of
Measureme
Measureme
nt Report
nt Report Interval Type 0~63 0~63 dB 30 30 Cell
Pre-
processing
of
Measureme
nt Report Interval Type 0~63 0~63 None 1 1 Cell
Radio
Common
Channel
Manageme
nt Interval Type 1~20 1~20 None 4 4 Cell
O&M of 35.0~55.3
BTS Interval Type 350~553 (step: 0.1) V 430 430 BTS
Network-
Controlled 2G(Preference
Cell for 2G Cell),
Reselection Enumeration 3G(Preference
(NC2) Type for 3G Cell) 2G, 3G None 2G 2G Cell
Network-
Controlled
COMMON(CO
Cell
MMON),
Reselection
MULTIPATH(M
(NC2) Interval Type 0~100 0~100 per cent 30 30 Cell
ULTIPATH), COMMON,
Uplink INDOOR(INDO MULTIPAT
EGPRS2-A OR), H,
Downlink Enumeration HIGHWAY(HIG INDOOR,
EGPRS2-A Type HWAY) HIGHWAY None COMMON COMMON Cell
Fast 3G
Reselection
at 2G CS
Call Enumeration NO(No),
Release Type YES(Yes) NO, YES None NO NO Cell
Faulty
Manageme 40.0~79.0 degree
nt Interval Type 400~790 (step: 0.1) Celsius 500 500 BTS
Faulty
Manageme -19.0~5.0 degree
nt Interval Type -190~50 (step: 0.1) Celsius -100 -100 BTS
O&M of 0.0~100.0 degree
BTS Interval Type 0~1000 (step: 0.1) Celsius 800 800 BTS
GSM Flow
Control Interval Type 20~90 20~90 per cent 80 80 TRX
Security
Manageme 0~200
nt String Type None characters None None None BSC6900
O&M of ATERCON
BSC Interval Type 20~90 20~90 None 80 80 SL
O&M of ATERCON
Compact
BSC Interval Type 20~90 20~90 None 80 80 SL
BTS
Automatic
Configurati
on and Enumeration OFF(OFF),
Planning Type ON(ON) OFF, ON None None None Cell
O&M of
BSC
Security
Manageme 1~32
nt String Type None characters None None None BSC6900
O&M of
BSC Interval Type 30~100 30~100 None 90 90 BSC
O&M of ATERCON
BSC QUICK_HO_N
Interval Type 30~100 30~100 None 90 90 SL
CELL_TYPE_A
(QUICK_HO_N
CELL_TYPE_A
O&M of
), QUICK_H
BSC Interval Type 30~100 30~100 None 90 90 BSC
QUICK_HO_N O_NCELL
CELL_TYPE_B _TYPE_A,
(QUICK_HO_N QUICK_H QUICK_HO_ QUICK_HO
Chain Cell Enumeration CELL_TYPE_B O_NCELL NCELL_TYP _NCELL_TY
Handover Type ) _TYPE_B None E_A PE_A Cell
CAPABILITY(C
apability
CHAINTORING
preferred),
(ChainToRing), CHAINTO
QUALITY(Quali
COMBINECHAI RING,
ty preferred), CAPABILI
O&M of Enumeration NS(CombineCh COMBINE
PSRELATIVEL TY,
BTS Type ains) CHAINS None None None BTS
Y(PS relatively QUALITY,
Enhanced preferred), PSRELATI
Channel PSABSOLUTEL VELY,
Assignment Enumeration Y(PS absolutely PSABSOL
Algorithm Type preferred) UTELY None CAPABILITY CAPABILITY Cell
O&M of
BSC Interval Type 0~100 0~100 per cent 100 100 Cell
Simplified
Cell
Broadcast Interval Type 0~65535 0~65535 None None None Cell
Enhanced
Channel
Assignment Enumeration NO(No),
Algorithm Type YES(Yes) NO, YES None YES YES Cell
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None NO NO MSC
O&M of
BTS Interval Type 5~20 5~20 None 10 10 BTS
O&M of
BTS Interval Type 5~20 5~20 None 10 10 BTS
Enumeration NO(NO),
A over IP Type YES(YES) NO, YES None NO NO SCTP link
Enumeration NO(NO),
A over IP Type YES(YES) NO, YES None NO NO SCTP link
ALDER32(ALD
ER32),
Enumeration CRC32(CRC32 ALDER32,
A over IP Type ) CRC32 None CRC32 CRC32 SCTP link
IP Fault
Detection SBFD,
Based on Enumeration SBFD, ARP, ARP,
BFD Type MBFD MBFD None None None None
BTS Test
Function Interval Type 0~12 0~12 h None None None
Configurati
on
Manageme
nt Interval Type 1~7 1~7 None None None BTS
O&M of
BSC Interval Type 0~169 0~169 None None None Board
TRXRFSELFL
OOP(TRX RF
Self Loopback
Test),
BIULOOP(BIU
Loopback Test),
Configurati
BTSSPEECHL
on
OOP(BTS TRXRFSE
Manageme Physical
Speech LFLOOP,
nt Interval Type 0~7 0~7 None None None channel
Loopback Test), BIULOOP,
TRXSPEECHL BTSSPEE
OOP(TRX CHLOOP,
BTS Test Enumeration Speech TRXSPEE
Function Type Loopback Test) CHLOOP None None None None
Configurati FULLTCH(FULL
on TCH),
Manageme Enumeration HALFTCH(HAL FULLTCH,
nt Type FTCH) HALFTCH None None None BTS
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
NOSENDING(F
A Interface
orce NO
Protocol Enumeration NO(No),
Sending),
Process Type YES(Yes) NO, YES None YES YES MSC
SYSTEMOPT( NOSENDI
System NG,
A Interface Optimization), SYSTEMO
Protocol Enumeration SENDING(Forc PT, SYSTEMOP SYSTEMOP
Process Type e Sending) SENDING None T T MSC
Enhanced
Channel
Assignment Enumeration NO(No),
Algorithm Type YES(Yes) NO, YES None YES YES Cell
GSM Flow
Control Interval Type 10~800 10~800 None 100 100 BSC
MBCCH(Main
BCCH),
CBCCH(Combi
ned BCCH),
BCH(BCH), TCHFR,
BCCH_CBCH( TCHHR,
BCCH+CBCH), SDCCH8,
SDCCH_CBCH MBCCH,
(SDCCH+CBC CBCCH,
GSM Flow H), BCH,
Control Interval Type PBCCH_PDTC
10~800 BCCH_CB
10~800 None 200 200 BSC
H(PBCCH+PDT CH,
CH), SDCCH_C
PCCCH_PDTC BCH,
GSM Flow 100~6000
H(PCCCH+PD PBCCH_P
Control Interval Type 100~600000 00 ms 1000 1000 BSC
TCH), DTCH,
Configurati PDTCH(PDTC PCCCH_P
on H), DTCH,
Manageme Enumeration DPDCH(Dynam PDTCH, Physical
nt Type ic PDCH) DPDCH None TCHFR TCHFR channel
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None None None Cell
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None None None Cell
A Interface
Circuit
Manageme
nt Interval Type 0~65535 0~65535 None None None E1/T1 link
O&M of
BSC Interval Type 0~65535 0~65535 None None None None
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
NOTSENDING(
Not sending),
A Interface
SENDINGPRO(
Protocol Enumeration NO(No),
sending
Process Type YES(Yes) NO, YES None YES YES MSC
according to NOTSEND
NOTSENDING(
protocol), ING,
Not sending),
A Interface SENDING(unco SENDING
SENDINGPRO(
Protocol Enumeration nditionally PRO, NOTSENDIN NOTSENDI
sending
Process Type sending) SENDING None G NG MSC
according to NOTSEND
protocol), ING,
A Interface SENDING(unco SENDING
Protocol Enumeration nditionally PRO, NOTSENDIN NOTSENDI
Process Type sending) SENDING None G NG MSC
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
64~10000 IP logical
IP QOS Interval Type 1~1562 0, step:64 kbit/s None None port
Enhanced
Channel
Assignment
Algorithm Interval Type 0~22 0~22 dB 22 22 Cell
ERR_PFM_1E6
O&M of (RECOVERY:1
BTS Interval Type E-6),
0~27 0~27 None None None BSC6900
ERR_PFM_5E6
(RECOVERY:5
E-6),
O&M of ERR_PFM_1E5
BTS Interval Type 0~11
(RECOVERY:1 0~11
ERR_PFM None None None BSC6900
INCLK(Internal
E-5),
UNSUPPORT( _1E6,
Clock),
ERR_PFM_5E5
Not Support), ERR_PFM
UNSUPP
BSCCLK(Trace
Class11 Enumeration (RECOVERY:5
SUPPORT(Sup _5E6,
ORT, UNSUPPOR
BSC Clock),
DTM Type E-5),
port) ERR_PFM
SUPPORT None T None Cell
EXCLK(Externa
ERR_PFM_1E4 _1E5,
l Synchro
(RECOVERY:1 ERR_PFM
Clock),
E-4), _5E5,
Enumeration IPCLK(IP
NO(No),
ERR_PFM_5E4 ERR_PFM
Call Control Type Clock),
YES(Yes) NO, YES None NO NO BSC
(RECOVERY:5 _1E4,
TRANSCLK(Tra INCLK,
Abis IP E-4), ERR_PFM
ce Trans
INT_CLK(Intern BSCCLK,
over E1/T1 ERR_PFM_1E3 _5E4,
Clock),
al Clock), EXCLK,
A IP over Enumeration (RECOVERY:1 ERR_PFM ERR_PFM_
GPSCLK(Trace
TRCBSC_CLK( IPCLK,
E1/T1 Type E-3) _1E3 None None 5E6 Board
GPS
TraceClock),
BSC TRANSCL
UMCLK(Um
Clock), K,
Clock),
EXTSYN_CLK( GPSCLK,
O&M of Enumeration PEERCLK(PEE
External Sync UMCLK,
BTS Type R Clock)
clock), PEERCLK None None None None
HW_DEFINED(
IP_TIME(IP
Huawei User- INT_CLK,
Clock),
defined), TRCBSC_
O&M of Enumeration IP_TRANSFER
PTP(PTP CLK,
HW_DEFI
BTS Type (Trace
Protocol) EXTSYN_
NED, PTP None PTP PTP BTS
Transport CLK,
Clock), IP_TIME,
TRCGPS_CLK( IP_TRANS
Enumeration GCUa,
Trace GPS FER,
None Type GCUa, GCGa GCGa None None None BSC6900
Clock), TRCGPS_
UM_CLK(Um CLK,
Clock), UM_CLK,
BTS/NodeB Enumeration PEER_CLK(Pe PEER_CL
Clock Type er Clock) K None None None BTS
O&M of
BTS Interval Type 0~255 0~255 s 255 255 BTS
Faulty
Manageme cleared, cleared,
nt Bit Field Type uncleared uncleared None None None BSC6900
O&M of
BTS Interval Type 0~255 0~255 s 255 255 BTS
O&M of
BSC
Security
Manageme 1~200
nt String Type None characters None None None BSC6900
O&M of
BSC
Security
Manageme 0~128
nt String Type None characters None None None BSC6900
O&M of
BSC Interval Type 0~19 0~19 None None None BSC6900
Configurati
on
Manageme
nt Interval Type 1~3 1~3 None None None None
O&M of
BTS Interval Type 0~62 0~62 None None None BTS
IP Fault
Detection
Based on
BFD Interval Type 0~62 0~62 None 0 0 BTS
O&M of
BTS Interval Type 0~62 0~62 None None None BSC6900
O&M of
BTS Interval Type 0~62 0~62 None None None None
BSC Node
Redundanc
y Interval Type 1~60 1~60 s 30 30 Cell
BTS3012(BTS3
012),
BTS3012AE(BT
S3012AE),
BTS3006C(BT
S3006C),
MSC Pool Interval Type 0~4095
BTS3012_II(BT 0~4095 None None None MSC
S3012 II),
BTS3002E(BTS
3002E), BTS3012,
SGSN Pool Interval Type DBS3900_GSM
0~4095 BTS3012A
0~4095 None None None NSE
(DBS3900 E,
GSM), BTS3006C
BTS3900_GSM ,
(BTS3900 BTS3012_
MSC Pool Interval Type 0~31
GSM), 0~31
II, None None None BSC
BTS3900A_GS BTS3002E
License M(BTS3900A ,
Manageme GSM), DBS3900_
nt Interval Type DBS3036(DBS
0~3 GSM,
0~3 None None None None
3036), BTS3900_
BTS3036(BTS3 GSM,
BSC Node NONE(None),
036), NONE,
BTS3900A
Redundanc Enumeration AINTFBLOCK(
BTS3036A(BTS AINTFBLO
_GSM,
y Type AInterf
3036A),Block) CK
DBS3036, None NONE NONE BSC
BTS3900_GSM BTS3036,
Faulty _6RFC(BTS390 BTS3036A
Manageme 0 GSM 6RFC), ,
nt Interval Type BTS3900A_GS
1~150000 BTS3900_
1~150000 None None None BSC6900
BTS3002C
M_6RFC(BTS3 GSM_6RF
,
900A GSM C,
BTS3002C, BTS3012A
6RFC), BTS3900A
O&M of Enumeration BTS3012A, ,
BTS3036_6RF _GSM_6R
BTS Type BTS3006A BTS3006A None None None BTS
C(BTS3036 FC,
6RFC), BTS3036_
BTS3036A_6R 6RFC,
O&M of Enumeration FC(BTS3036A BTS3036A
BTS Type 6RFC) _6RFC None None None BTS
O&M of
BSC
Security
Manageme 10000~50
nt Interval Type 10000~50000 000 None None None BSC6900
Faulty
Manageme
nt Interval Type 0~250 0~250 None 0 None None
Faulty
Manageme
nt Interval Type 0~250 0~250 None 0 None None
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None YES YES Cell
Simplified
Cell L0_FORBI L0_FORBID
Broadcast Interval Type 1~1023 D,
1~1023 None L0_FORBID-
None -None Cell
L1_FORBI 0&L1_FORBI 0&L1_FORB
D, D- ID-
INACTIVE(Inact L2_FORBI 0&L2_FORBI 0&L2_FORB
O&M of Enumeration ive), INACTIVE,
D, D- ID-
BTS Type ACTIVE(Active) ACTIVE
L3_FORBI None INACTIVE
0&L3_FORBI INACTIVE
0&L3_FORB BTS
BYSITE(By D, D- ID-
Soft- Site), L4_FORBI 0&L4_FORBI 0&L4_FORB
Synchroniz Enumeration BYCELL(By D,
BYSITE, D- ID-
ed Network Type L0_FORBID,
Cell) L5_FORBI
BYCELL None 0&L5_FORBI
None 0&L5_FORB
None BSC6900
L1_FORBID, D, D- ID-
L2_FORBID, L6_FORBI 0&L6_FORBI 0&L6_FORB
Active
L3_FORBID, D, D- ID-
Power 0~10,
L4_FORBID, L7_FORBI 0&L7_FORBI 0&L7_FORB
Control Interval Type 0~100 step:0.1 dB 45 45 Cell
Radio L5_FORBID, D, D- ID-
Common L6_FORBID, L8_FORBI 0&L8_FORBI 0&L8_FORB
Channel L7_FORBID, D, D- ID-
Manageme L8_FORBID, L9_FORBI 0&L9_FORBI 0&L9_FORB
nt Bit Field Type L9_FORBID D None D-0 ID-0 Cell
LOWERC
Security LOWERCASE, ASE,
Manageme UPPERCASE, UPPERCA
nt Bit Field Type DIGIT SE, DIGIT None None None BSC6900
O&M of
BTS Interval Type 1~100 1~100 None 100 100 None
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
BYNAME(By
2G/3G Co-
O&M of Enumeration Name), BYNAME,
Transmissio
BTS Type BYID(By Index) BYID None None None BTS
n
Resources
Manageme
2G/3G Co-
nt on
Transmissio
MBSC Interval Type 10~150 10~150 ms 15 IP/HDLC:15 BSC6900
n
Resources
Manageme
2G/3G Co-
nt on
Transmissio
MBSC Interval Type 10~150 10~150 ms 15 IP/HDLC:15 BSC6900
n
Resources
Manageme
nt on
MBSC Interval Type 10~150 10~150 ms 15 IP/HDLC:15 BSC6900
2G/3G Co-
Transmissio
n
Resources
Manageme
2G/3G Co-
nt on
Transmissio
MBSC Interval Type 10~150 10~150 ms 15 IP/HDLC:15 BSC6900
n
Resources
Manageme
2G/3G Co-
nt on
Transmissio
MBSC Interval Type 10~150 10~150 ms 25 25 BSC6900
n
Resources
Manageme
2G/3G Co-
nt on
Transmissio
MBSC Interval Type 10~150 10~150 ms 25 25 BSC6900
n
Resources
Manageme
2G/3G Co-
nt on
Transmissio
MBSC Interval Type 10~150 10~150 ms 25 IP/HDLC:25 BSC6900
n
Resources
Manageme
2G/3G Co-
nt on
Transmissio
MBSC Interval Type 10~150 10~150 ms 25 IP/HDLC:25 BSC6900
n
Resources
Manageme
2G/3G Co-
nt on
Transmissio
MBSC Interval Type 10~150 10~150 ms 25 IP/HDLC:25 BSC6900
n
Resources
Manageme
2G/3G Co-
nt on
Transmissio
MBSC Interval Type 10~150 10~150 ms 25 IP/HDLC:25 BSC6900
n
Resources
Manageme
2G/3G Co-
nt on
Transmissio
MBSC Interval Type 10~150 10~150 ms 50 50 BSC6900
n
Resources
Manageme
nt on
MBSC Interval Type 10~150 10~150 ms 50 50 BSC6900
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
Tree
Topology Interval Type 0~335 0~335 None None None BSC6900
Configurati
on
Manageme Enumeration NO(NO),
nt Type YES(YES) NO, YES None NO NO None
O&M of
BSC ALL(ALL Type),
Security ONLY_SSL(Onl ALL,
Manageme Enumeration y SSL ONLY_SS
nt Type Connection) L None None None BSC6900
INNER(Internal
MBSC RNC), INNER,
Load Enumeration EXTERNAL(Ext EXTERNA
Balancing Type ernal RNC) L None None None BSC
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~60 0~60 s 4 4 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 1~200 1~200 s 6 6 Cell
Ethernet
None Interval Type 1~28 1~28 None 5 5 port
TRX Power
Amplifier
Intelligent Enumeration NO(No),
Shutdown Type YES(Yes) NO, YES None NO NO TRX
Configurati
on
Manageme
nt Interval Type 0~7 0~7 None None None BSC
OFF(Off),
ON(On), OFF, ON,
O&M of Enumeration NOTSUPPORT NOTSUPP NOTSUPPO NOTSUPPO
0dB, 2dB,
BTS Type (Not Support) ORT None RT RT BTS
4dB, 6dB,
0dB, 2dB, 4dB, 8dB,
Basic Cell 6dB, 8dB, 10dB,
Re- Enumeration 10dB, 12dB, 12dB,
selection Type 14dB 14dB dB 6dB 6dB Cell
Security
Manageme 0~200
nt String Type None characters None None None BSC6900
DISABLE(Disab
Security le),
Manageme Enumeration ENABLE(Enabl DISABLE,
nt Type e) ENABLE None None None BSC6900
Public
Voice
Group Call
Service
Public
Public
Voice
Voice
Broadcast 10~2550,
Group Call
Service Interval Type 1~255 step: 10 ms 10 10 Cell
Service
Public
Voice
Broadcast
Service Interval Type 1~255 1~255 None 3 3 Cell
Basic Cell
Re- 0~126,
selection Interval Type 0~63 step: 2 dB 0 0 Cell
O&M of
BSC Interval Type 1~255 1~255 None 255 When the255 BSC
UNAVAILABLE(
UNAVAILABLE) UNAVAILA interface
, BE,
BLE,AF11, type is Abis,
Enumeration AVAILABLE(AV AF12,
AVAILABL UNAVAILABL transmission
UNAVAILAB
A over IP Type AILABLE) AF13,
E None E type
LE is IP, SCTP link
AF21, the
AF22, parameter is
BE, AF11, AF23, AF43; When
AF12, AF13, AF31, the interface
IP QOS Interval Type 0~100 0~100 per cent 100 100 BSC6900
AF21, AF22, AF32, type is A,
When the
AF23, AF31, AF33, Ater or Iur-g,
interface
AF32, AF33, AF41, the
type is Abis
Enumeration AF41, AF42, AF42, parameter is
and
IP QOS Type AF43, EF AF43, EF None None AF43. BSC6900
transmission
type is
HDLC, the
parameter is
IP QOS Interval Type 0~7 0~7 None None 1. BSC6900
IP QOS Interval Type 0~100 0~100 per cent 100 100 BSC6900
GSM Flow
Control Interval Type 0~7 0~7 None 5 5 Cell
GSM Flow
Control Interval Type 30~100 30~100 per cent 90 90 TRX
GSM Flow
Control Interval Type 0~7 0~7 None 3 3 Cell
Enumeration ON(ON),
None Type OFF(OFF) ON, OFF None None ON BSC6900
A Interface
Protocol 40000~50
Process Interval Type 40000~50000 000 ms 45000 45000 None
A Interface
Protocol 5000~150
Process Interval Type 5000~150000 000 ms 30000 30000 None
A Interface
Protocol 1000~200
Process Interval Type 1000~2000 0 ms 1300 1300 None
A Interface
Protocol
Process Interval Type 400~600 400~600 ms 500 500 None
A Interface
Protocol 7500~950
Process Interval Type 7500~9500 0 ms 8200 8200 None
A Interface
Protocol
Process Interval Type 80~120 80~120 ms 100 100 None
A Interface
Protocol 3000~600
Process Interval Type 3000~6000 0 ms 5000 5000 None
A Interface
Protocol
Process Interval Type 500~2000 500~2000 ms 1500 1500 None
A Interface
Protocol
Process Interval Type 1~100 1~100 ms 100 100 None
Flow
Control Interval Type 30~100 30~100 per cent 95 95 Board
Flow
Control Interval Type 30~100 30~100 per cent 95 85 Board
Soft-
Synchroniz 1~167772
ed Network Interval Type 1~16777215 15 None None None BSC6900
4BURST(4Burs
t),
Enumeration RLC/MAC(RLC/ 4BURST,
GPRS Type MAC) RLC/MAC None 4BURST 4BURST Cell
NO(Cancel
Control Flag),
O&M of Enumeration YES(Set
BTS Type Control Flag) YES, NO None None None None
Remote
Electrical
Tilt Interval Type 0~62 0~62 None None None BTS
Remote
Electrical
Tilt Interval Type 0~5 0~5 None None None BTS
Remote
Electrical
Tilt Interval Type 0~23 0~23 None None None BTS
Remote
Electrical
Tilt Interval Type 0~254 0~254 None None None BTS
0, 2, 4, 8, Transmissi
0,2,4,8,10,12,1 10, 12, 14, on
4,16,18,20,22,2 16, 18, 20, resource
IP QOS Interval Type 4,26 22, 24, 26 None None None group
O&M of
BTS Interval Type 0~27,255 0~27, 255 None None None BTS
O&M of
BTS Interval Type 0~11,255 0~11, 255 None None None BTS
Configurati
on
Manageme Enumeration ON(ON),
nt Type OFF(OFF) ON, OFF None ON ON BSC6900
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None NO NO MSC
O&M of
TCH:480~
BTS Interval Type 0~99 0~99 None None None BTS
14880,
HUAWEI I step:480;
Handover SDCCH:4 NT14_5K- NT14_5K-
HUAWEI II NT14_5K,
70~14570, 0&NT12K- 0&NT12K-
TCH:480~
NT14_5K~0
Handover Interval Type 1~31 NT12K,
step:470 ms 1&NT6K- 4 1&NT6K- 4 Cell
14880,
NT12K~1 NT6K, 1&T14_4K- 1&T14_4K-
HUAWEI I step:480;
NT6K~2 T14_4K, 0&T9_6K- 0&T9_6K-
Handover SDCCH:4
T14_4K~3 T9_6K, 1&T4_8K- 1&T4_8K-
HUAWEI II 70~14570,
T9_6K~4 T4_8K, 1&T2_4K- 1&T2_4K-
Handover Interval Type 1~31 step:470 ms 4 4 Cell
T4_8K~5 T2_4K, 1&T1_2K- 1&T1_2K-
T2_4K~6 T1_2K, 0&T600_BIT 0&T600_BIT
G3 Fax T1_2K~7 T600_BIT S- S-
(TS61, T600_BITS~8 S, 0&T1200_75 0&T1200_7
TS62) Bit Field Type T1200_75 T1200_75 None -0 5-0 Cell
O&M of
BSC
Security NOLIMIT(No
Manageme Enumeration Limit), NOLIMIT,
nt Type LIMIT(Limit) LIMIT None NOLIMIT NOLIMIT BSC6900
2000-1-
O&M of Compound YEAR, 1~2099-
BSC Type MONTH, DAY 12-31 None None None BSC6900
TRX Power
Amplifier
Intelligent
Shutdown Interval Type 1~12 1~12 None None None BSC
O&M of
BTS Interval Type 1~31 1~31 None None None BTS
If the
coverage
areas in the
overlaid and
underlaid
subcells are
similar and
tight
frequency
O&M of degree
reuse is
BTS Interval Type 0~30 0~30 Celsius 2 2 BTS
used on the
BCCH, the
recommend
Co-BCCH Enumeration Inner(Inner), Inner, ed value is
Cell Type Extra(Extra) Extra None None Extra. Cell
Enhanced
Dual-Band
Network Interval Type 0~2047 0~2047 None None None Cell
Enhanced
Dual-Band 1~64
Network String Type None characters None None None Cell
Enhanced BYNAME(By
Dual-Band Enumeration Name), BYNAME,
Network Type BYID(By Index) BYID None None None Cell
O&M of
BTS Interval Type 0~255 0~255 None None None BTS
O&M of
BTS Interval Type 0~255 0~255 None None None
If "Power BTS
System
Type" is
O&M of "SC48200",
BTS Interval Type 0~255 0~255 None None the
None BTS
recommend
ed value is
"470". For
O&M of
Power
BTS Interval Type 0~255 0~255 None None None BTS
System
Type, the
recommend
O&M of 43.3~55.5 ed value is
BTS Interval Type 350~556 (step: 0.1) V None "450". BTS
Faulty
Manageme 58.0~60.0
nt Interval Type 580~600 (step: 0.1) V 580 580 BTS
Faulty
Manageme 43.3~55.5
nt Interval Type 433~555 (step: 0.1) V 450 450 BTS
O&M of 58.0~60.0
BTS Interval Type 580~600 (step: 0.1) V 580 580 BTS
PDCH
Dynamic
Adjustment Interval Type 0~32 0~32 None 0 0 Cell
Radio
Dedicated
Channel
Manageme 500~6000
nt Interval Type 500~60000 0 ms 1000 1000 Cell
INACTIVE(Inact
O&M of Enumeration ive), INACTIVE,
BTS Type ACTIVE(Active) ACTIVE None INACTIVE INACTIVE BTS
0.0.0.0~25
IP Address 5.255.255. Ethernet
None Type None 255 None None None port
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None BSC6900
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None None
Ethernet
Compact
None Interval Type 1~1000 1~1000 None None None port
BTS
Automatic
Configurati
on and Enumeration
Planning Type BSC, BTS BSC, BTS None None None BTS
BTS, BSC,
O&M of Enumeration BTS, BSC, DXX,
BTS Type DXX, OTHER OTHER None None None BTS
MBSC
Load
Balancing Interval Type 0~27 0~27 None None None BSC
MBSC
Load
Balancing Interval Type 0~11 {0~11} None None None BSC
MBSC
Load
Balancing Interval Type 0~7 0~7 None None None BSC
Configurati
on
Manageme
nt Interval Type 0~3071 0~3071 None None None Cell
O&M of
BSC Interval Type 0~255 0~255 s None 2 Cell
IP Fault
Detection Current
Based on BFD
BFD Interval Type 3~10 3~10 None 3 3 session
Remote
Electrical 0~50
Tilt String Type None characters None None None BTS
Remote
Electrical
Tilt Interval Type 0~35 0~35 None None None BTS
Abis IP
over E1/T1 0.0.0.0~25
A IP over IP Address 5.255.255.
E1/T1 Type None 255 None None None BSC6900
GSM/WCD
MA
Enumeration LOGIC_IP(Logi
Interoperabi
None Type cal IP Address) LOGIC_IP None None None BSC6900
lity
GSM/TD-
SCDMA
Interoperabi
lity Interval Type 0~16383 0~16383 None None None Cell
MON_3(No.3),
MON_4(No.4),
MON_5(No.5),
MON_6(No.6),
MON_7(No.7),
MON_8(No.8),
MON_9(No.9),
MON_10(No.10
),
O&M of MON_11(No.11
BTS Interval Type 0~23
), 0~23 None None None BTS
MON_12(No.12
),
O&M of MON_13(No.13
BTS Interval Type ),
0~254 0~254 None None None BTS
MON_14(No.14
NO(Not Default
),
DPC),
MON_15(No.15
Enumeration YES(Default
),
MSC Pool Type DPC)
MON_16(No.16 NO, YES None YES YES MSC
O&M of DEFAULTPOR
BSC ),
T(Default 21 DEFAULT
Security MON_17(No.17
Port), PORT,
Manageme Enumeration ),
CUSTOMPORT CUSTOM DEFAULTP
nt Type MON_18(No.18
(Custom Port) PORT None None ORT BSC6900
),
MON_19(No.19
),
MON_20(No.20
None Interval Type 1~60
), 1~60 min 1 1 None
MON_21(No.21
), 0.0.0.0~25
O&M of IP Address MON_22(No.22 5.255.255.
BTS Type ),
None 255 None None None BSC6900
MON_23(No.23
),
MON_24(No.24
O&M of ),
BTS Interval Type 0~63
MON_25(No.25 0~63 None None None BSC6900
),
DISABLE(DISA
MON_26(No.26
BLE),
O&M of Enumeration ),
ENABLE(ENAB DISABLE,
SDCCH
BTS Type MON_27(No.27
LE) ENABLE None DISABLE DISABLE BTS
Handover
),
Enhanced
MON_28(No.28
Channel
),
Assignment Enumeration NO(No),
MON_29(No.29
Algorithm Type YES(Yes) NO, YES None NO NO Cell
),
MON_30(No.30
SUN(Sunday),
),
MON(Monday),
O&M of Enumeration MON_31(No.31 MON_1~M
TUE(Tuesday), SUN,
BSC Type ) ON_31 None None None BSC6900
WED(Wednesd MON,
ay), TUE,
THU(Thursday), WED,
O&M of Enumeration FRI(Friday), THU, FRI,
BSC Type SAT(Saturday) SAT None None None BSC6900
O&M of
BSC
License
Manageme 1~128
nt String Type None characters None None None BSC6900
O&M of 1~256
BTS String Type None characters None None None None
Enumeration NO(No),
Direct Retry Type YES(Yes) NO, YES None NO NO MSC
Enumeration NO(No),
Direct Retry Type YES(Yes) NO, YES None YES YES Cell
Downlink 0.5~4,
EGPRS2-A Interval Type 4~32 step: 1/8 bit 4 4 Cell
Downlink 0.5~4,
EGPRS2-A Interval Type 4~32 step: 1/8 bit 4 4 Cell
0.5~4,
EGPRS Interval Type 4~32 step: 1/8 bit 4 4 Cell
TCH:480~
Transmit Enumeration N0(No),
122400,
Diversity Type YES(Yes) NO, YES None NO NO BTS
step:480;
HUAWEI III SDCCH:4
Power 70~11985
Control 0,
Algorithm Interval Type 0~255 step:470 ms 3 3 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 14 14 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 14 14 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 16 16 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 16 16 Cell
Gb Over
Adaptive
FR Interval Type 16~1007 16~1007 None None None
The NSVC
Adjustment
of Uplink recommend
and ed value is
Downlink 20 when
Channels Interval Type 1~255 1~255 None 5 HUAWEI I 5 BSC
Handover is
UNSUPPORT(
used;
Dual Not Support), UNSUPP
The
Carriers in Enumeration SUPPORT(Sup ORT, UNSUPPOR
recommend
Downlink Type port) SUPPORT None T None Cell
ed value is
HUAWEI I 15 when
Handover HUAWEI II
HUAWEI II Handover is
Handover Interval Type 0~63 0~63 dB 20 used. Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~10 1~10 None 3 3 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 16 16 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 16 16 Cell
MBSC
Load
Balancing Interval Type 1~100 1~100 None 90 90 BSC
TCH:480~
9600,
Enhanced step:480;
Power SDCCH:4
Control 70~9400, The
AMR
Algorithm Interval Type 1~20 step:470 ms 5 recommend5 Cell
Coding
ed value is 8
Rate
when DTX is
Threshold
disabled.
Adaptive
AMR The
Adjustment Interval Type 2~255 2~255 None 2 2 Cell
Coding recommend
Rate ed value is
Threshold 14 when
Adaptive DTX is
AMR
Adjustment Interval Type 2~255 2~255 None 8 enabled. Cell
Coding
Rate
Threshold
Adaptive
AMR
Adjustment Interval Type 2~255 2~255 None 60 60 Cell
Coding
Rate
Threshold
Adaptive
Adjustment Interval Type 2~255 2~255 None 2 2 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 4 4 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 8 8 Cell
MBSC
Load
Balancing Interval Type 1~100 1~100 None 100 100 BSC
Enhanced
Power
Control
Algorithm Interval Type 0~3 0~3 None 0 0 Cell
Enhanced
Power
Control
Algorithm Interval Type 0~7 0~7 None 0 0 Cell
Enhanced
Power
Control
TCH:480~
Algorithm Interval Type 0~7 0~7 None 2 2 Cell
9600,
Enhanced step:480;
Power SDCCH:4
Control 70~9400,
Algorithm Interval Type 1~20 step:470 ms 5 5 Cell
Enhanced
Power
Control
Algorithm Interval Type 0~7 0~7 None 2 2 Cell
Enhanced
Power
Control
Algorithm Interval Type 0~63 0~63 dB 10 10 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 55 55 Cell
Public
Voice
Extended
Group Call
Uplink TBF Interval Type 0~300 0~300 ms 90 90 Cell
Service
Public
Public
Voice
Voice
Broadcast
Group Call
Service Interval Type 0~255 0~255 s 0 0 Cell
Service
Public
Voice
Broadcast
Service Interval Type 1~255 1~255 None 5 5 Cell
O&M of
BTS Interval Type 0~255 0~255 None None None BTS
O&M of
BTS Interval Type 0~255 0~255 None None None BTS
Clock over
IP support MCS1(MCS1),
1588V2 Interval Type 0~255
MCS2(MCS2), 0~255
MCS1, None None None BTS
MCS1(MCS1), MCS1,
MCS3(MCS3),
CS1(CS1), MCS2,
MCS2(MCS2), MCS2,
MCS4(MCS4),
CS2(CS2), MCS3,
MCS3(MCS3), MCS3,
Coding Enumeration MCS7(MCS7),
CS3(CS3),
MCS4(MCS4),
MCS4,
CS1,
MCS1,CS2,
MCS4,
Scheme Type MCS8(MCS8),
CS4(CS4) MCS7,
CS3, CS4 None CS2 CS2 Cell
MCS7(MCS7),
MCS5(MCS5), MCS2,
MCS5,
DAS5(DAS5), MCS8,
MCS8(MCS8),
MCS6(MCS6), MCS3,
MCS6,
DAS6(DAS6), DAS5, ,
DAS5(DAS5),
MCS7(MCS7), MCS4,
MCS7,
DAS7(DAS7), DAS6,
Enumeration DAS6(DAS6),
MCS8(MCS8), MCS7,
MCS8,
DAS8(DAS8), DAS7,
EGPRS Type DAS7(DAS7),
MCS9(MCS9) MCS8,
MCS9 None MCS6 MCS6 Cell
DAS9(DAS9), DAS8,
DAS8(DAS8), DAS5, ,
DAS10(DAS10) DAS9,
DAS9(DAS9), DAS6,
, DAS10,
DAS10(DAS10) DAS7,
Downlink Enumeration DAS11(DAS11), DAS11,
, DAS8,
EGPRS2-A Type DAS12(DAS12) DAS12 None DAS6 DAS6 Cell
DAS11(DAS11), DAS9,
DAS12(DAS12) DAS10,
, DAS11,
Downlink Enumeration UNFIXED(UNFI DAS12,
CS1(CS1),
EGPRS2-A Type XED) UNFIXED None UNFIXED UNFIXED Cell
CS2(CS2),
CS3(CS3),
CS4(CS4), CS1, CS2,
Coding Enumeration UNFIXED(UNFI CS3, CS4,
Scheme Type XED) UNFIXED None UNFIXED UNFIXED Cell
MCS1(MCS1),
MCS2(MCS2), MCS1,
MCS3(MCS3), MCS2,
MCS4(MCS4), MCS3,
MCS5(MCS5), MCS4,
MCS6(MCS6), MCS5,
MCS7(MCS7), MCS6,
MCS8(MCS8), MCS7,
Enhanced
MCS9(MCS9), MCS8,
Power
Enumeration UNFIXED(UNFI MCS9,
Control
EGPRS Type XED) UNFIXED None UNFIXED UNFIXED Cell
Algorithm
HUAWEI III
Power
Control Enumeration NO(No),
Point To
Algorithm Type YES(Yes) NO, YES None YES YES Cell
Point Short
Message
Service
(TS21, Enumeration NO(No),
TS22) Type YES(Yes) NO, YES None NO NO Cell
Coding
Scheme Interval Type 0~64 0~64 per cent 10 10 Cell
Coding
Scheme Interval Type 0~64 0~64 per cent 5 5 Cell
Faulty
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None OPEN None None
Active
Power 0~25.5,
Control Interval Type 0~255 step:0.1 dB 30 30 Cell
1~16383(B
IT14),
1~65535(B
A Interface IT16),
Protocol 1~167772
Process Interval Type 1~16777215 15(BIT24) None None None SCCP
A Interface
Protocol 1~11
Process String Type None characters None None None SCCP
A Interface
Circuit
Manageme
nt Interval Type 0~31 0~31 None None None E1/T1 link
A Interface
Circuit
Manageme
nt Interval Type 0~31 0~31 None 0 0 E1/T1 link
MSC Pool Interval Type 0~31 0~31 None None None BSC
STP(STP),
A Interface A(A),
Protocol Enumeration IUR_G(IUR_G), STP, A,
Process Type LB(LB) IUR_G, LB None None None SCCP
A Interface
Protocol
Process Interval Type 0~186 0~186 None None None SCCP
MBSC
Load
Balancing Interval Type 0~182 0~182 None None None BSC
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~128 0~128 dB 72 72 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~1 0~1 None 1 1 Cell
INACTIVE(Inact
O&M of Enumeration ive), INACTIVE,
BTS Type ACTIVE(Active) ACTIVE None INACTIVE INACTIVE BTS
Abis IP
over E1/T1
A IP over
0~31(PEU
E1/T1 Interval Type 0~335 0~335 None None None PPP link
a),
Abis IP 0~251(E1
over E1/T1 of POUc),
A IP over 0~335(T1
E1/T1 Interval Type 0~335 of POUc) None None None MP link
Ethernet
None Interval Type 0~63 0~63 None 0 0 port
O&M of 1~128
BTS String Type None characters None None None None
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None IP route
IP Fault
Detection 0.0.0.0~25 Current
Based on IP Address 5.255.255. BFD
BFD Type None 255 None None None session
0.0.0.0~25
Abis over IP Address 5.255.255.
IP Type None 255 None None None IP route
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None IP route
0.0.0.0~25
Abis over IP Address 5.255.255.
IP Type None 255 None None None IP route
None Interval Type 0~335 0~335 None None None E1/T1 port
TS10, TS11, TS21,
TS12, TS13, TS22,
TS14, TS15, TS23,
TS16, TS17, TS24,
TS18, TS19, TS25,
TS20, TS21, TS26,
TS22, TS23, TS27,
TS24, TS25, TS28,
TS26, TS27, TS29,
TS28, TS29, TS30,
None Bit Field Type TS30, TS31 TS31 None None None E1/T1 port
O&M of
BTS Interval Type 1~12 1~12 None None None BTS
1(1), 2(2), 3(3),
4(4), 5(5), 6(6), 1, 2, 3, 4,
7(7), 8(8), 9(9), 5, 6, 7, 8,
O&M of Enumeration 10(10), 11(11), 9, 10, 11,
BTS Type 12(12) 12 None None None BTS
O&M of
BTS Interval Type 0~1 0, 1 None None None BTS
O&M of
BTS Interval Type 0~1,255 0~1, 255 None None None BTS
O&M of
BTS Interval Type 0~23 0~23 None None None BTS
O&M of
BTS Interval Type 0~23,255 0~23, 255 None None None BTS
O&M of
BTS Interval Type 0~53 0~53 None None None BTS
O&M of
BTS Interval Type 0~53,255 0~53, 255 None None None BTS
Encrypted
Network
Manageme Enumeration OFF(Off),
nt Type ON(On) OFF, ON None OFF OFF Cell
Abis over Enumeration FULL(FULL), FULL,
IP Type HALF(HALF) HALF None FULL FULL BTS
BTS Test
Function Interval Type 0~12 0~12 h None None None
BTS Test
Function Interval Type 1~24 1~24 h None None None
BTS Test
Function Interval Type 0~59 0~59 min None None None
BTS Test
Function Interval Type 0~59 0~59 s None None None
PDCH
Dynamic
Adjustment Interval Type 10~80 10~80 None 20 20 Cell
Soft-
Synchroniz
ed Network Interval Type 0~63 0~63 None 20 20 BSC6900
O&M of
BTS Interval Type 0~2047 0~2047 None None None BTS
O&M of
BSC Interval Type 0~2047 0~2047 None None None BTS
O&M of
BTS Interval Type 0~15 0~15 None None None BTS
LEVEL0(Preem
pt all dynamic
PDCH
TCHFs),
Dynamic
LEVEL1(No
Adjustment Interval Type 10~3600 10~3600 s 20 20 Cell
preempt of
CCHs),
PDCH LEVEL2(No LEVEL0,
Dynamic Enumeration preempt of LEVEL1,
Adjustment Type service TCHF) LEVEL2 None LEVEL0 LEVEL0 Cell
PDCH
Dynamic
Adjustment Interval Type 0~8 0~8 None 2 2 Cell
TRX Power
Amplifier
Intelligent Enumeration NO(No),
Shutdown Type YES(Yes) NO, YES None YES YES Cell
NOTSUPPORT
(Not Support), NOTSUPP
Dynamic DDIVERSITY(D ORT,
Transmit Enumeration DIVERSITY), DDIVERSI NOTSUPPO NOTSUPPO
Diversity Type DPBT(DPBT) TY, DPBT None RT RT Cell
O&M of ACTIVE(ACTIV
BTS Interval Type 1~60
E 1~60 min None None None
TMU/MMU/IOM
U/DOMU),
O&M of ACTIVESTAND
BTS Interval Type BY(ACTIVE/ST
0~7 0~7 None None None None
Abis
ANDBY TMU),
Transmissio
SLAVE1(SLAV
n
E
Optimizatio
TMU1/DOMU1) ACTIVE,
n Interval Type 0~31 0~31 None None None BTS
, ACTIVEST
SLAVE2(SLAV ANDBY,
E SLAVE1,
BTS Test Enumeration TMU2/DOMU2) SLAVE2,
Function Type , UTRP(UTRP) UTRP None None None None
Channeliz
ed optical
None Interval Type 0~83 0~83 None None None port
BTS/NodeB
IP-Based
Clock Interval Type 0~7 0~7 None None None BTS
2G/3G Co-
Transmissio
n on Base
Station
Side Interval Type 16~19 16~19 None None None BTS
BTS/NodeB Enumeration
Clock Type E1(E1), T1(T1) E1, T1 None None None BTS
0.0.0.0~25
IP Address 5.255.255.
IP QOS Type None 255 None None None IP path
recommend
ed that this
parameter
be set to
Yes.
4. When
GSM/WCD frequencies
MA of the
Interoperabi extended
lity Interval Type 0~49 0~49 dB 3 frequency 3 Cell
band exist
GSM/WCD
on a 900
MA
MHz cell, it
Interoperabi
is
lity Interval Type 0~49 0~49 dB 30 30 Cell
recommend
ed that this
System parameter
Information Enumeration NO(No), be set to
Sending Type YES(Yes) NO, YES None YES Yes. Cell
Faulty
Manageme 1~214748
nt Interval Type 1~2147483646 3646 None 2147483646 2147483646 BSC6900
2000-1-
O&M of Compound year, month, 1~2037-
BSC Type date 12-31 None None None BSC6900
Faulty 2000-1-
Manageme Compound year, month, 1~2037-
nt Type day 12-31 None None None BSC6900
Faulty 2000-1-
Manageme Compound year, month, 1~2037-
nt Type day 12-31 None None None BSC6900
2000-01-
O&M of Compound year, month, 01~2050-
BTS Type day 12-31 None None None None
Configurati
on
Manageme
nt Interval Type 1~31 1~31 d None None BSC6900
Enhanced
Dual-Band
Network Interval Type 1~255 1~255 s 4 4 Cell
Enhanced
Dual-Band
Network Interval Type 1~255 1~255 s 5 5 Cell
Enhanced
Dual-Band
Network Interval Type 0~11 0~11 None 10 10 Cell
Enumeration NO(No),
EGPRS Type YES(Yes) NO, YES None NO None Cell
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 4 4 Cell
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 6 6 Cell
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 1 1 Cell
HUAWEI I 0.5~16,
Handover Interval Type 1~32 step:0.5 s 4 4 Cell
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 1 1 Cell
HUAWEI I 0.5~16,
Handover Interval Type 1~32 step:0.5 s 6 6 Cell
NO(Effect
Later),
O&M of Enumeration YES(Effect
BTS Type Immediately) YES, NO None None None None
11-Bit
EGPRS Enumeration NO(NO),
Access Type YES(YES) NO, YES None YES YES Cell
Uplink
EGPRS2-A
Downlink Enumeration NO(No),
EGPRS2-A Type YES(Yes) NO, YES None NO None Cell
Network-
Controlled
Cell
Reselection
(NC2) Interval Type 0~31 0~31 None 16 16 Cell
Network-
Controlled
Cell
Reselection
(NC2) Interval Type 0~31 0~31 None 7 7 Cell
DATE(Input
with date),
WEEK(Input
Configurati with week), DATE,
on DATEWEEK(In WEEK,
Manageme Enumeration put with date DATEWEE
nt Type and week)
ERR_PFM_5E6 K
ERR_PFM None None None BSC6900
(OCCUR:5E-6), _5E6,
Emergency ERR_PFM_1E5 ERR_PFM
Call Service (OCCUR:1E-5), _1E5,
(TS12) Interval Type ERR_PFM_5E5
1~15 ERR_PFM
1~15 None 15 15 Cell
(OCCUR:5E-5), _5E5,
ERR_PFM_1E4 ERR_PFM
A Interface
(OCCUR:1E-4), _1E4,
Protocol Enumeration OFF(OFF),
ERR_PFM_5E4 ERR_PFM
Process Type ON(ON) OFF, ON None OFF OFF MTP3 link
(OCCUR:5E-4), _5E4,
Abis IP ERR_PFM_1E3 ERR_PFM
over E1/T1 (OCCUR:1E-3),
NoPriority(No _1E3,
A IP over Enumeration ERR_PFM_5E3
Priority), ERR_PFM ERR_PFM_
E1/T1 Type (OCCUR:5E-3)
Priority4(Priority _5E3 None None 1E5 Board
4),
Priority3(Priority
O&M of 3),
Enhanced
BTS Interval Type Priority2(Priority
0~63 0~63 None None None BSC6900
Multi Level
2),
Precedence
Priority1(Priority NoPriority,
and
1), Priority4,
Preemption Enumeration NO(No),
Priority0(Priority Priority3,
(EMLPP) Type YES(Yes) NO, YES None NO NO Cell
0), Priority2,
PriorityB(Priorit Priority1,
y B), Priority0,
Group Call Enumeration PriorityA(Priorit PriorityB,
Enhanced
EMLPP Type y A) PriorityA None Priority4 Priority4 Cell
Multi Level
Precedence
and
Preemption Enumeration NO(No),
(EMLPP) Type YES(Yes) NO, YES None NO NO BSC
O&M of JAN(January),
BTS Interval Type 0~7
FEB(February), 0~7 None None None BSC6900
MAR(March),
APR(April),
MAY(May),
IP QOS Interval Type JUN(June),
0~7 0~7 None 7 7 BSC
JUL(July),
AUG(August),
SEP(Septembe JAN, FEB,
O&M of
r), MAR,
BTS Interval Type 2~4094 2~4094 None None None BSC6900
OCT(October), APR, MAY,
Configurati NOV(November JUN, JUL,
on ), AUG, SEP,
Manageme Enumeration DEC(December OCT, NOV,
nt Type ) DEC None None None BSC6900
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None BSC6900
Group Call
Reliability Enumeration NO(No),
Enhancing Type YES(Yes) NO, YES None NO NO BTS
A5/1 and
ENABLED(Ena ENABLED
A5/2 A5/0-
bled), ,
Ciphering A5/0-1&A5/1- 1&A5/1-
O&M of Enumeration DISABLED(Dis DISABLE
Algorithm 0&A5/2- 0&A5/2-
BTS Type abled) D None None None None
A5/1 0&A5/3- 0&A5/3-
Encryption A5/0~0 A5/1~1 A5/0, A5/1, 0&A5/4- 0&A5/4-
Flow A5/2~2 A5/3~3 A5/2, A5/3, 0&A5/5- 0&A5/5-
Optimizatio A5/4~4 A5/5~5 A5/4, A5/5, 0&A5/6- 0&A5/6-
AUTO(Automati
n Bit Field Type A5/6~6 A5/7 A5/6, A5/7 None 0&A5/7-0 0&A5/7-0 Cell
c), AUTO,
PLAINTEXT(Pl PLAINTEX
ain Text), T,
O&M of Enumeration ENCRYPTED(S ENCRYPT
BSC Type SL Encrypted) ED None AUTO AUTO BSC6900
AUTO(Auto), AUTO,
PLAINTEXT(Pl PLAINTEX
ain Text), T,
O&M of Enumeration ENCRYPTED(S ENCRYPT
BSC Type SL Encrypte) ED None None None BSC6900
End-to-End
MS
Signaling Enumeration NO(No),
Tracing Type YES(Yes) NO, YES None NO NO BSC
Faulty
Manageme
nt Interval Type 1~65535 1~65535 None None None BSC6900
A Interface
Circuit
Manageme
nt Interval Type 0~65535 0~65535 None None None E1/T1 link
O&M of
BSC Interval Type 0~65535 0~65535 None None None PBCIC
TRX Power
Amplifier
Intelligent
Shutdown Interval Type 1~31 1~31 None None None BSC
O&M of
BTS Interval Type 1~31 1~31 None None None BTS
DISABLED(Pro
hibit to Use), DISABLE
O&M of Enumeration ENABLED(Avail D,
BSC Type able) ENABLED None None None BSC6900
DISABLED(Pro
hibit to Use), DISABLE
O&M of Enumeration ENABLED(Avail D,
BSC Type able) ENABLED None ENABLED ENABLED BSC6900
2G/3G Co-
Concentric
Transmissio
Cell Interval Type 0~100 0~100 per cent 70 70 Cell
n
Resources
Manageme
nt on Enumeration OFF(OFF),
MBSC Type ON(ON) OFF, ON None OFF OFF Cell
Concentric
Cell Interval Type 1~255 1~255 s 5 5 Cell
Concentric
Cell Interval Type 0~63 0~63 dB 5 5 Cell
Concentric
Cell Interval Type 0~100 0~100 per cent 20 20 Cell
Enumeration OFF(Off),
IP QOS Type ON(On) OFF, ON None ON ON BSC
Enumeration OFF(Off),
IP QOS Type ON(On) OFF, ON None ON ON BSC
Concentric
Cell Interval Type 0~100 0~100 per cent 80 80 Cell
Dynamic
M3UA_ASP~0||
Adjustment
(M3UA_ASP)$$
Between Enumeration NO(No),
(M3UA_ASP)**
FR and HR Type YES(Yes) NO, YES None YES None Cell
M3UA_IPSP(M
3UA_ASP)** M3UA_AS
M3UA_SGP(M
M3UA_IPSP~2| P,
3UA SGP), M3UA_SG
Enumeration |(M3UA_IPSP)$ M3UA_IP
M3UA_IPSP(M P,
A over IP Type $(M3UA_IPSP) SP None None None SCCP
3UA IPSP), M3UA_IP
M3UA_SS7SP( SP,
M3UA SS7SP), M3UA_SS
Enumeration M3UA_SP(M3U 7SP,
A over IP Type A SP) M3UA_SP None None None SCCP
Concentric
Cell Interval Type 0~63 0~63 dB 63 63 Cell
Enhanceme
nt Packet
Loss
Concealme Enumeration OFF(Off),
nt(EPLC) Type ON(On) OFF, ON None None ON Board
O&M of
BSC
Security
Manageme 1~429496
nt Interval Type 1~4294967295 7295 None None None BSC6900
Emergency
Call Service Enumeration NO(No),
(TS12) Type YES(Yes) NO, YES None NO NO Cell
CCUR:5E-5, E4,
RECOVERY:1E O5E4_R1
-5), E4,
O1E5_R5E6(O O1E4_R5
CCUR:1E-5, E5,
RECOVERY:5E O5E5_R1
-6), E5,
O5E6_R1E6(O O1E5_R5
CCUR:5E-6, E6,
Enumeration RECOVERY:1E O5E6_R1
None Type -6) E6 None O5E4_R1E4 O5E4_R1E4 Board
Enumeration OFF(OFF),
None Type ON(ON) OFF, ON None OFF OFF Board
O&M of
BTS Interval Type 0~63 0~63 None None None BSC6900
O&M of
BTS Interval Type 0~7 0~7 None None None BSC6900
O&M of
BTS Interval Type 2~4094 2~4094 None None None BSC6900
Faulty
Manageme 1~214748
nt Interval Type 1~2147483646 3646 None 2147483646 2147483646 BSC6900
Assignment
and
Immediate 500~6000
Assignment Interval Type 500~60000 0 ms 3000 3000 Cell
Simple
Mode
LCS(Cell ID Enumeration CLOSE(Close), CLOSE,
+ TA) Type OPEN(Open) OPEN None CLOSE CLOSE MSC
Fast Ring
Network
Switch Interval Type 0~255 0~255 s 0 0 BTS
Configurati
on
Manageme Compound HOUR, MIN, HOUR,
nt Type SEC MIN, SEC None None None BSC6900
O&M of 2000-1-1
BSC 00:00:00~
Security year, month, 2037-12-
Manageme Compound date, hour, min, 31
nt Type sec 23:59:59 None None None BSC6900
O&M of Compound 00:00~23:
BSC Type hour, min 59 None None None BSC6900
ONE_BY_ONE(
Execute One by ONE_BY_
One), ONE,
O&M of Enumeration PARALLEL(Par PARALLE ONE_BY_O
BSC Type allel Execute) L None None NE BSC6900
O&M of 2000-1-1
BSC 00:00:00~
Security year, month, 2037-12-
Manageme Compound date, hour, min, 31
nt Type sec 23:59:59 None None None BSC6900
Faulty
Manageme Compound 00:00:00~
nt Type hour, min, sec 23:59:59 None None None BSC6900
Faulty
Manageme Compound 00:00:00~
nt Type hour, min, sec 23:59:59 None None None BSC6900
1970-1-1
00:00:00~
Simplified year, month, 2538-12-
Cell Compound day, hour, min, 31
Broadcast Type sec 23:59:59 None None None Cell
O&M of
BSC
Security 2000-1-
Manageme Compoundyear, month, 1~2037-
nt Type LOGINEVENT(
day 12-31 None None None BSC6900
Login Event),
MANAGEEVEN LOGINEV
T(Management ENT,
O&M of Compound 00:00:00~
Event), MANAGE
BTS Type hour, min, sec 23:59:59 None None None None
O&M of AUTHEVENT(A EVENT,
BSC uthentication AUTHEVE
Security Event), NT,
Manageme Enumeration OTHEREVENT( OTHEREV
nt Type Other Event) ENT None None None BSC6900
O&M of
BSC
SUN(Sunday),
Security
MON(Monday),
Manageme Compound 00:00:00~
TUE(Tuesday), SUN,
nt Type hour, min, sec 23:59:59 None None None BSC6900
WED(Wednesd MON,
Configurati ay), TUE,
on THU(Thursday), WED,
Manageme Enumeration FRI(Friday), THU, FRI,
FIRST(First),
nt Type SAT(Saturday) SAT None None None BSC6900
SECOND(Seco FIRST,
Configurati nd), SECOND,
on THIRD(Third), THIRD,
Manageme Enumeration FOURTH(Fourt FOURTH,
nt Type h), LAST(Last) LAST None None None BSC6900
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0.02 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0.004 None None
Configurati VOLTAGE(Volta
on ge),
Manageme Enumeration CURRENT(Curr VOLTAGE,
nt Type ent) CURRENT None CURRENT None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 100 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0.02 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0.004 None None
Configurati VOLTAGE(Volta
on ge),
Manageme Enumeration CURRENT(Curr VOLTAGE,
nt Type ent) CURRENT None CURRENT None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 100 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0.02 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0.004 None None
Configurati VOLTAGE(Volta
on ge),
Manageme Enumeration CURRENT(Curr VOLTAGE,
nt Type ent) CURRENT None CURRENT None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 100 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0.02 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0.004 None None
Configurati VOLTAGE(Volta
on ge),
Manageme Enumeration CURRENT(Curr VOLTAGE,
nt Type ent) CURRENT None CURRENT None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 100 None None
Configurati
on
Manageme 1~9
nt String Type None characters V or A 0 None None
NoExclusive(No
Exclusive), NoExclusi
Enumeration Exclusive(Exclu ve,
GPRS Type sive) Exclusive None NoExclusive NoExclusive Cell
O&M of
BSC Interval Type 0~100 0~100 per cent None 25 Cell
Active
Power
Control Interval Type 0~63 0~63 dB 30 30 Cell
Active
Power
Control Interval Type 0~63 0~63 dB 30 30 Cell
Configurati
on
Manageme 2048~504
nt Interval Type 2048~5047 7 None None None BSC
O&M of 1~64
BTS String Type None characters None None None BSC
Configurati
on
Manageme 5048~804
nt Interval Type 5048~8047 7 None None None BSC
O&M of 1~64
BTS String Type None characters None None None BSC
Configurati
on
Manageme 2048~504
nt Interval Type 2048~5047 7 None None None BSC6900
Configurati
on
Manageme 1~64
nt String Type None characters None None None BSC6900
Fast Ring
Network Enumeration NO(No),
Switch Type YES(Yes) NO, YES None NO NO BTS
GSM Flow
Control Interval Type 0~100 0~100 per cent 55 75 TRX
Ethernet
None Interval Type 0~1999 0~1999 None None None port
Abis IP
over E1/T1
A IP over
E1/T1 Interval Type 0~1999 0~1999 None 0 0 PPP link
Abis IP
over E1/T1
A IP over
E1/T1 Interval Type 0~1999 0~1999 None 0 0 MP group
IP logical
IP QOS Interval Type 0~1999 0~1999 None 0 0 port
None Interval Type 10~1999 10~1999 None None None BSC6900
Link Ethernet
aggregation Interval Type 0~1999 0~1999 None 0 0 port
O&M of
Compact
BTS Interval Type 2~1999 2~1999 None None None BSC6900
BTS
Automatic
Configurati
on and
Planning Interval Type 0~62 0~62 None None None BTS
O&M of
BTS Interval Type 0~62 0~62 None None None BTS
GSM Flow
Control Interval Type 0~100 0~100 per cent 85 85 TRX
Abis IP
over E1/T1 None(None),
A IP over Enumeration 16bit(16bit), None,
E1/T1 Type 32bit(32bit) 16bit, 32bit None 16bit 16bit PPP link
Abis IP
over E1/T1 None(None),
A IP over Enumeration 16bit(16bit), None,
E1/T1 Type 32bit(32bit) 16bit, 32bit None 16bit 16bit MP link
Flow Enumeration
Control Type ON, OFF ON, OFF None ON None None
O&M of 43.2~57.5
BTS Interval Type 432~575 (step: 0.1) V 535 535 BTS
GSM/WCD
MA
Interoperabi Enumeration AUTO(Auto), AUTO,
lity Type MANU(Manu) MANU None None None Cell
Configurati
on
Manageme Enumeration AUTO(Auto), AUTO,
nt Type MANU(Manu) MANU None None None Cell
GSM/WCD
MA
Interoperabi 0~42,
lity Interval Type 0~7 step: 6 dB 0 0 Cell
GSM/WCD 0~36,
MA Positive
Interoperabi infinity,
lity Interval Type 0~7 step: 6 dB 0 0 Cell
GSM/WCD
MA
Interoperabi
lity Interval Type 0~1 0~1 None None None Cell
GSM/WCD
MA
Interoperabi
lity Interval Type 0~16383 0~16383 None None None Cell
GSM/WCD
MA
Interoperabi
lity Interval Type 0~49 0~49 dB 10 10 Cell
GSM/WCD
MA
Interoperabi
lity Interval Type 0~3 0~3 None 2 2 Cell
GSM/WCD -20, -6,
MA -18, -8,
Interoperabi -16, -10,
lity Interval Type 0~7 -14, -12 dB 0 0 Cell
GSM/WCD
MA
Interoperabi
lity Interval Type 0~7 0~7 dB 0 0 Cell
GSM/WCD Negative
MA infinity,
Interoperabi -28~28,
lity Interval Type 0~15 step: 4 dB 8 8 Cell
GSM/WCD
MA
Interoperabi Enumeration RSCP(RSCP), RSCP,
lity Type EcN0(Ec/N0) EcN0 None RSCP RSCP Cell
GSM/WCD
MA
Interoperabi -114~-84,
lity Interval Type 0~15 step: 2 dBm 6 6 Cell
GSM/WCD
MA
Interoperabi
lity Interval Type 0~63 0~63 None 10 10 Cell
GSM/WCD
MA
Interoperabi For the
lity Interval Type 0~511 0~511 None None double-
None Cell
transceiver
BTS and
NGBTS, the
Flow
default value
Control Interval Type 1~1000 1~1000 None 4 4 None
Voice is NO; for
Quality other BTS,
Index this
(Uplink Enumeration NO(No), parameter is
VQI) Type YES(Yes) NO, YES None NO invalid. Cell
Voice
Quality
Index
(Uplink
VQI) Interval Type 0~1000 0~1000 per mill 2 2 Cell
Voice
Quality
Index
(Uplink
VQI) Interval Type 0~1000 0~1000 per mill 4 4 Cell
Voice
Quality
Index
(Uplink
VQI) Interval Type 0~1000 0~1000 per mill 8 8 Cell
Voice
Quality
Index
(Uplink
VQI) Interval Type 0~1000 0~1000 per mill 16 16 Cell
Voice
Quality
Index
(Uplink
VQI) Interval Type 0~1000 0~1000 per mill 32 32 Cell
Voice
Quality NO_FH(No
Index frequency
(Uplink hopping),
VQI) Interval Type BaseBand_FH(
0~1000 0~1000 per mill 64 64 Cell
Voice
Baseband
Quality
frequency
Index
hopping),
(Uplink
Frequency RF_FH(RF
VQI) Interval Type 0~1000 0~1000 per mill 128 128 Cell
Hopping frequency NO_FH,
(RF hopping), BaseBand
hopping, Hybrid_FH(Hyb _FH,
baseband Enumeration rid frequency RF_FH,
hopping) Type hopping) Hybrid_FH None NO_FH NO_FH Cell
O&M of
BSC
Security
Manageme 1~128
nt String Type None characters None None None BSC6900
O&M of
BSC
BSC/RNC
Software
Manageme 1~200
nt String Type None characters None None None BSC6900
O&M of
BSC
Security
Manageme 0~200
nt String Type None characters None None None BSC6900
Configurati
on
Manageme 0~128
nt String Type None characters None None None BSC6900
O&M of
BSC
Faulty
Manageme Enumeration txt(.txt File),
nt Type csv(.csv File) txt, csv None csv csv BSC6900
Network-
Controlled
Cell
Reselection
(NC2) Interval Type 0~32 0~32 None 6 6 Cell
O&M of
BSC
Security FALSE(Failed),
Manageme Enumeration TRUE(Succeed FALSE,
nt Type ed) TRUE None None None BSC6900
HUAWEI III
Power
Control Enumeration NO(No),
Algorithm Type YES(Yes) NO, YES None NO NO Cell
INACTIVE(Inact
O&M of Enumeration ive), INACTIVE,
BTS Type ACTIVE(Active) ACTIVE None INACTIVE INACTIVE BTS
Faulty
Manageme
nt Interval Type 0~65534 0~65534 s 0 0 BTS
Faulty
Manageme
nt Interval Type 0~65534 0~65534 s 0 0 BTS
DISABLE(DISA
Faulty BLE),
Manageme Enumeration ENABLE(ENAB DISABLE,
nt Type LE) ENABLE None ENABLE ENABLE BTS
Faulty
Manageme
nt Interval Type 60~65534 60~65534 s 900 900 BTS
Faulty
Manageme
FIX_16K_ABIS( FIX_16K_
nt Interval Type 60~65534 60~65534 s 900 900 BTS
Fix Abis), ABIS,
FLEX_ABIS(Fle FLEX_ABI
x Abis), S,
When tight
Enumeration SEMI_ABIS(Se SEMI_ABI FIX_16K_AB FIX_16K_A
frequency
Flex Abis Type misolid Abis) S None IS BIS BTS
reuse is
used, the
recommend
Encrypted
Enumeration OFF(Off), ed value is
Network
Flex MAIO Type ON(On) OFF, ON None OFF ON. Cell
Manageme
nt
Soft-
Synchroniz Enumeration OFF(Off),
Adaptive
ed Network Type ON(On) OFF, ON None OFF OFF Cell
Adjustment
of Uplink
and
Downlink
Adaptive
Channels Interval Type 0~65535 0~65535 ms 4500 4500 BSC
Adjustment
of Uplink
and
Downlink
Channels Interval Type 0~65535 0~65535 ms 1000 1000 BSC
HUAWEI I
Handover Interval Type 0~20 0~20 None 10 10 Cell
HUAWEI I
Handover Interval Type 0~20 0~20 None 10 10 Cell
HUAWEI I
Handover Interval Type 0~20 0~20 None 10 10 Cell
HUAWEI I
Handover Interval Type 0~20 0~20 None 10 10 Cell
HUAWEI I
Handover Interval Type 0~20 0~20 None 10 10 Cell
HUAWEI I
Handover Interval Type 0~20 0~20 None 10 10 Cell
HUAWEI I
Handover Interval Type 0~20 0~20 None 10 10 Cell
HUAWEI I
Handover Interval Type 0~20 0~20 None 10 10 Cell
HUAWEI I
Handover Interval Type 0~200 0~200 None 0 0 Cell
O&M of 1~128
BSC String Type None characters None None None BSC6900
Configurati
on
Manageme 0~128
nt String Type None characters None None None BSC6900
License
Manageme 0~100
nt String Type None characters None None none BSC6900
O&M of 1~256
BTS String Type None characters None None None None
O&M of 1~256
BTS String Type None characters None None None None
A Interface
Protocol
Process Interval Type 1~300 1~300 s 15 15 MSC
Automatic
Level
Control
(ALC) Interval Type 0~30 0~30 s 0 0 Board
O&M of
BTS Interval Type 0~31 0~31 None None None BTS
O&M of
BTS Interval Type 0~7 0~7 None None None BTS
Abis MUX
UDP MUX
for A
Transmissio
Compact
n Interval Type 1~30 1~30 ms 2 2 None
BTS
Automatic
Configurati
on and Enumeration OFF(OFF),
Compact
Planning Type ON(ON) OFF, ON None None None Cell
BTS
Automatic
Configurati
on and Enumeration OFF(OFF),
Compact
Planning Type ON(ON) OFF, ON None None None Cell
BTS
Automatic
Configurati
on and Enumeration OFF(OFF),
Planning Type ON(ON) OFF, ON None None None Cell
Abis IP
over E1/T1
A IP over
E1/T1 Interval Type 128~1024 128~1024 byte 256 None MP group
Soft- - -
Synchroniz 2715647~2715 2715647~
ed Network Interval Type 647 2715647 None None None BSC6900
Configurati
on
Manageme
nt Interval Type 0~255 0~255 None 0 0 Cell
Discontinuo
us
Transmissio
n (DTX) Enumeration NO(No),
Downlink Type YES(Yes) NO, YES None YES YES Cell
DAILY_C(Day
Based
Duration),
WEEKLY_T(We
ek Based ONTIME,
Scheduling), DAILY_T,
O&M of
WEEKLY_C(W DAILY_C,
BSC ONTIME(Fixed
eek Based WEEKLY_
Security Time),
Duration), T,
Manageme Enumeration RELATIVE_T(R ONTIME,
MONTHLY_T(M WEEKLY_
nt Type elative Time) RELATIVE None None None BSC6900
onth Based C,
Scheduling), MONTHLY
MONTHLY_C( _T,
O&M of Enumeration Month Based MONTHLY
BSC Type Duration) _C None None None BSC6900
Frequency
Band Interval Type 0~1023 0~1023 None None None TRX
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
Frequency
Band Interval Type 0~1023 0~1023 None None None Cell
PGSM900(PGS
M900),
Frequency EGSML25(EGS
Band Interval Type 0~1023
M<L25>), 0~1023 None None None Cell
EGSM35M(EG
SM<35M>),
Frequency RGSML25(RG
Band Interval Type SM<L25>),
0~1023 0~1023 None None None Cell
GSM900_RGS PGSM900,
M39M(GSM900 EGSML25,
_RGSM<39M>) EGSM35M
Frequency , ,
Band Interval Type 0~1023
DCS1800(DCS 0~1023
RGSML25 None None None Cell
AFC(Autom 1800), ,
atic PCS1900(PCS GSM900_
Frequency Enumeration 1900),
NO(No), RGSM39
Correction) Type GSM850(GSM8
YES(Yes) M,
NO, YES None NO NO Cell
50), DCS1800,
AFC(Autom
EGSM24M(EG PCS1900,
atic
SM<24M>), GSM850,
Frequency
DCS1800_L(D EGSM24M
Correction) Interval Type 0~65535 0~65535 None 36671 36671 Cell
CS1800<L50M ,
Configurati >), DCS1800_
on DCS1800_H(D L,
Manageme Enumeration CS1800<H50M DCS1800_
nt Type >) H None None None BTS
Enhanced
Channel
Assignment
Algorithm Interval Type 0~100 0~100 per cent 25 25 Cell
Cell
Frequency
Scan Interval Type 0~1023 0~1023 None None None Cell
Configurati
on
Manageme Enumeration LOOSE(Loose), LOOSE,
2G/3G
nt Type TIGHT(Tight) TIGHT None LOOSE LOOSE TRX
Neighborin
g Cell
Automatic
Optimizatio 1~800
n String Type None characters None None None BSC
MainDiversity(M MainDiver
ainDiversity), sity,
Cell MaximumMean Maximum
Frequency Enumeration Value(Maximum MeanValu MaximumMe MaximumMe
Scan Type MeanValue) e None anValue anValue Cell
HUAWEI I
Handover
May_Use(May
HUAWEI II Enumeration NO(No),
Use),
Handover Type YES(Yes) NO, YES None YES YES Cell
Discontinuo Shall_Use(Shall
us Use), May_Use,
Transmissio Shall_NOT_Us Shall_Use,
n (DTX) Enumeration e(Shall not Shall_NOT
Compact
Uplink Type Use) _Use None Shall_Use Shall_Use Cell
BTS
Automatic
Configurati
on and
Planning Interval Type 0~23 0~23 None None None BTS
O&M of
Compact
BTS Interval Type 0~23 0~23 None None None BTS
BTS
Automatic
Configurati
on and
Planning Interval Type 0~255 0~255 None None None BTS
O&M of
BTS Interval Type 0~254 0~254 None None None BTS
O&M of
BSC TXT(Plain Text
Security Type),
Manageme Enumeration CSV(CSV
nt Type Type) TXT, CSV None TXT TXT BSC6900
Adjacent
IP QOS Interval Type 0~33 0~33 None None None node
HUAWEI II
Handover Interval Type 0~255 0~255 dB 20 20 Cell
HUAWEI II
Handover Interval Type 0~600 0~600 s 5 5 Cell
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 4 4 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 10 10 Cell
HUAWEI II
Handover Interval Type 0~600 0~600 s 1 1 Cell
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 6 6 Cell
MBSC
Load
Balancing Interval Type 0~200 -100~100 per cent 110 110 BSC
MBSC
Load
Balancing Interval Type 0~100 0~100 None 10 10 BSC
Enumeration
A over IP Type A0, U1 A0, U1 None A0 A0 Board
Power
Control Interval Type 0~31 0~31 None 12 12 Cell
Soft-
Synchroniz Compound hour{0~23}
ed Network Type hour, min min{0~59} None None None BSC6900
Soft-
Synchroniz
ed Network Interval Type 0~100 0~100 None 40 40 BSC6900
Soft-
Synchroniz Enumeration OFF(OFF),
ed Network Type ON(ON) OFF, ON None None ON BSC6900
Soft-
Synchroniz Compound hour{0~23}
ed Network Type hour, min min{0~59} None None None BSC6900
Public
NO(Not
Voice
Streaming Enumeration Support),
Group Call
QoS(GBR) Type YES(Support) NO, YES None NO NO Cell
Service
Public
Voice
Broadcast Enumeration OFF(Off),
Service Type ON(On) OFF, ON None OFF OFF BSC
Public
Voice
Enumeration DEG(DEG),
Group Call
None Type SEC(SEC) DEG, SEC None DEG DEG None
Service
Public
Voice
Broadcast Enumeration NO(No),
Service Type YES(Yes) NO, YES None YES YES Cell
NO(Not
support),
0.5~4,
SupportAsInnP
GPRS Interval Type 4~32 step: 1/8 bit 20 20 Cell
cu(Support as NO,
built-in PCU), SupportAs
NO(Not
SupportAsExtP
GPRS(GPRS InnPcu,
Support),
Enumeration cu(Support
Channel), as SupportAs
SupportAsInnP
GPRS Type external
EGPRSNORCHPcu) ExtPcu None None None Cell
cu(Support As NO,
(EGPRS
Inner Pcu), SupportAs
0dB(0dB),
Normal
SupportAsExtP InnPcu,
2dB(2dB),
Enumeration Channel),
cu(Support As SupportAs
4dB(4dB), 0dB, 2dB,
GPRS Type EGPRSPRICH(
Outer Pcu) ExtPcu None NO NO Cell
6dB(6dB), 4dB, 6dB,
EGPRS Priority GPRS,
8dB(8dB), 8dB,
Channel), EGPRSN
10dB(10dB), 10dB,
EGPRSSPECH ORCH,
Enumeration 12dB(12dB), 12dB,
(EGPRS EGPRSPR
GPRS Type 14dB(14dB) 14dB dB 2dB 2dB Cell
Special ICH,
Channel), EGPRSSP
NONGPRS(No ECH,
Enumeration n-GPRS NONGPR Physical
EGPRS Type Channel) S None NONGPRS NONGPRS channel
66dB), DB64(- DB66,
, 190sec,
64dB), DB62(- DB64,
260sec(260sec) 200sec,
62dB), DB60(- DB62,
, 210sec,
60dB), DB58(- DB60,
270sec(270sec) 220sec,
58dB), DB56(- DB58,
, 230sec,
56dB), DB54(- DB56,
280sec(280sec) 240sec,
54dB), DB52(- DB54,
, 250sec,
52dB), DB50(- DB52,
290sec(290sec) 260sec,
50dB), DB48(- DB50,
, 270sec,
Enumeration 48dB), DB48, no
300sec(300sec) 280sec,
GPRS Type nouse(no use) use dB DB110 DB110 Cell
, 290sec,
310sec(310sec) 300sec,
, 310sec,
Enumeration 320sec(320sec) 320sec, no
GPRS Type , nouse(no use) use s 10sec 10sec Cell
Network-
0db(0db),
Controlled
10db(10db), 0db, 10db,
Cell
20db(20db), 20db,
Reselection
30db(30db), 30db,
(NC2) Interval Type 0~7 0~7 None 5 5 Cell
40db(40db), 40db,
50db(50db), 50db,
60db(60db), 60db,
Enumeration infinity(infinity), infinity, no
GPRS Type nouse(no use) use dB 10db 10db Cell
GPS(GPS), GPS,
GLONASS(Glo GLONASS
BTS GPS nass), ,
Synchroniz Enumeration GPSGlonass(G GPSGlona
ation Type PSGlonass) ss None GPS GPS BTS
Group Call
Reliability 0~100000
Enhancing Interval Type 0~100000000 000 None None None BTS
Group Call
Reliability 0~100000
Enhancing Interval Type 0~100000000 000 None None None BTS
BSC Node
Redundanc
y Interval Type 0~65534 0~65534 None None None BSC
BSC Node
Redundanc 1~20
y String Type None characters None None None BSC
0.0.0.0~25
Abis over IP Address 5.255.255.
IP Type None 255 None None None BTS
0.0.0.0~25
Abis over IP Address 5.255.255. 255.255.255. 255.255.255
IP Type None 255 None 255 .255 BTS
HUAWEI II
Handover Interval Type 0~255 0~255 dB 20 20 Cell
HUAWEI II
Handover Interval Type 0~600 0~600 s 5 5 Cell
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 4 4 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 10 10 Cell
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 6 6 Cell
O&M of
BTS Interval Type 0~62 0~62 None None None BTS
HUAWEI II 0.5~8,
Handover Interval Type 1~16 step:0.5 s 2 2 Cell
HUAWEI II 0.5~8,
Handover Interval Type 1~16 step:0.5 s 3 3 Cell
O&M of
BTS Interval Type 0~65535 0~65535 None 65535 None BTS
O&M of
BTS Interval Type 0~65535 0~65535 None 65535 None BTS
Frequency Enumeration DCS1800, DCS1800,
Enhanced
Band Type PCS1900 PCS1900 None DCS1800 DCS1800 BSC
Multi Level
Precedence
and
Preemption
Enhanced
(EMLPP) Interval Type 1~14 1~14 None 1 1 Cell
Multi Level
Precedence
and
Preemption Enumeration NO(No),
Enhanced
(EMLPP) Type YES(Yes) YES, NO None NO NO BSC
Multi Level
Precedence
and
Preemption Enumeration NO(No),
(EMLPP) Type YES(Yes) NO, YES None NO NO Cell
BYCELLNAME( BYCELLN
O&M of Enumeration By cell name), AME,
BSC Type BYCGI(By CGI) BYCGI None None None Cell
O&M of 1~64
HOALGORITH
BSC String Type
None characters None None None Cell
M1(Handover
Configurati algorithm I), HOALGO
on HOALGORITH RITHM1,
Manageme Enumeration M2(Handover HOALGO HOALGORIT HOALGORI
nt Type algorithm II) RITHM2 None HM1 THM1 Cell
Chain Cell
Handover Interval Type 0~16 0~16 None 3 3 Cell
Chain Cell
Handover Interval Type 0~16 0~16 None 3 3 Cell
Fast Move
Handover Interval Type 0~63 0~63 dB 50 50 Cell
HUAWEI I
Handover
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 8 8 Cell
HUAWEI I
GSM/WCD
Handover
MA
HUAWEI II 0.5~16,
Interoperabi
Handover Interval Type 1~32 step:0.5 s 8 8 Cell
lity
GSM/TD- FREE(Free),
SCDMA INCELL(Intra-
Interoperabi cell),
lity Interval Type OUTCELL(Outg
0~49 0~49 dB 35 35 Cell
oing cell),
OUTST(Outgoi
ng site), FREE,
Fast Move 0.5~16,
OUTBSC(Outg INCELL,
Handover Interval Type 1~32 step:0.5 s 3 3 Cell
oing BSC), OUTCELL,
OUTSYS(Outg OUTST,
oing system), OUTBSC,
O&M of Enumeration SPCELL(Specif OUTSYS,
BSC Type ied cell) SPCELL None None None Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~127 0~127 dB 68 68 Cell
Pre_2G_Cell(Pr
eference for 2G
cell),
Pre_3G_Cell(Pr
Concentric
eference for 3G Pre_2G_C
Cell Interval Type 0~61 0~61 dB 32 32 Cell
cell), ell,
HUAWEI I Pre_2G_CellTh Pre_3G_C
Handover res(Preference ell,
HUAWEI II Enumeration 2G cell by Pre_2G_C Pre_2G_Cell Pre_2G_Cell
Handover Type thresh) ellThres None Thres Thres Cell
Enhanced
Dual-Band
Frequency
Network Interval Type 0~255 0~255 s 5 5 Cell
Hopping
(RF
hopping,
baseband
hopping) Interval Type 0~63 0~63 None None None Cell
IBCA
(Interferenc
e Based
Channel
Frequency
Allocation) Interval Type 0~63 0~63 None None None Cell
Hopping
(RF
hopping, BaseBand_FH( BaseBand
baseband Enumeration BaseBand FH), _FH,
hopping) Type RF_FH(RF FH) RF_FH None None None Cell
HUAWEI I
Handover
HUAWEI II
Frequency
Handover Interval Type 0~63 0~63 dB 25 25 Cell
Hopping
(RF
hopping,
baseband Enumeration OFF(Off),
hopping) Type ON(On) OFF, ON None OFF OFF BSC
Antenna
Frequency
Hopping Interval Type NO_FH(No
0~63 0~63 None 0 0 Cell
Frequency
Hopping),
Antenna
BaseBand_FH(
Frequency
Frequency Baseband
Hopping Interval Type 0~23 0~23 None None None Cell
Hopping Frequency
(RF Hopping), NO_FH,
hopping, RF_FH(RF BaseBand
baseband Enumeration Frequency _FH,
hopping) Type Hopping) RF_FH None NO_FH NO_FH TRX
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~63 0~63 dB 63 63 Cell
GSM/WCD
Soft-
MA
Synchroniz
Interoperabi
ed Network Interval Type 1~60 1~60 min 15 15 BSC6900
lity
GSM/TD-
SCDMA
Interoperabi
lity Interval Type 0~63 0~63 dB 50 50 Cell
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
HUAWEI I
Handover
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 10 10 Cell
HUAWEI I
Handover
HUAWEI II 0.5~16,
Handover Interval Type 1~32 step:0.5 s 10 10 Cell
Fast Move
Handover Interval Type 0~63 0~63 dB 50 50 Cell
NO_HPANT(No
), NO_HPAN
Antenna YES_HPANT(Y T,
Frequency Enumeration es), YES_HPA
Hopping Type NONE(None) NT, NONE None NONE NONE Cell
NO_HPANT(No NO_HPAN
Antenna ), T,
Frequency Enumeration YES_HPANT(Y YES_HPA
Hopping Type es) NT None None None Cell
O&M of
BTS Interval Type 0~5 0~5 None None None BTS
Resource
Reservation Interval Type 1~14 1~14 None 1 1 Cell
O&M of 35.0~55.6
BTS Interval Type 350~556 (step: 0.1) V 440 440 BTS
Discontinuo
Half Rate Enumeration NO(No),
us
Speech Type YES(Yes) NO, YES None NO NO Cell
Transmissio
n (DTX)
Downlink
Half Rate Enumeration NO(No),
Speech Type YES(Yes) NO, YES None YES YES Cell
Discontinuo May_Use(May
Concentric Enumeration NO(No),
us Use),
Cell Type YES(Yes) NO, YES None YES YES Cell
Transmissio Shall_Use(Shall
n (DTX) Use), May_Use,
Uplink Shall_NOT_Us Shall_Use,
Half Rate Enumeration e(Shall not Shall_NOT
Frequency
Speech Type Use) _Use None Shall_Use Shall_Use Cell
Hopping
(RF
hopping,
baseband
hopping) Interval Type 0~63 0~63 None 0 0 Cell
O&M of
BTS Interval Type 0~23 0~23 None None None BTS
Enumeration OFF(Off),
Flex MAIO Type ON(On) OFF, ON None OFF OFF Cell
O&M of
BTS Interval Type 0~254 0~254 None None None BTS
IP Fault SBFD(SINGLE
Detection _HOP), Current
Based on Enumeration MBFD(MULTI_ SBFD, BFD
BFD Type HOP) MBFD None None None session
Faulty
Manageme degree
nt Interval Type -99~70 -99~70 Celsius 40 40 BTS
Faulty
Manageme degree
nt Interval Type 0~30 0~30 Celsius None None BTS
DISABLE(DISA
Faulty BLE),
Manageme Enumeration ENABLE(ENAB DISABLE,
nt Type LE) ENABLE None ENABLE ENABLE BTS
Faulty
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None OPEN None
If "APMU Board
Board Type"
Faulty is
Manageme 1~9 "SC48200",
nt String Type None characters per cent 80 the
None Board
recommend
ed value is
Faulty
"900". For
Manageme 1~9
other types
nt String Type None characters per cent 10 None
If Board
of"APMU
APMU
Board
boards,Type"
the
Faulty is
recommend
Manageme 0.0~100.0 "SC48200",
ed value is
nt Interval Type 0~1000 (step: 0.1) None 1000 the
"1000". BTS
recommend
ed value is
Faulty
"100". For
Manageme 0.0~100.0
other types
nt Interval Type 0~1000 (step: 0.1) None 800 800 BTS
of APMU
boards, the
Faulty recommend
Manageme 0.0~100.0 ed value is
nt Interval Type 0~1000 (step: 0.1) None 0 "0". BTS
Faulty
Manageme 0.0~100.0
nt Interval Type 0~1000 (step: 0.1) None 100 100 BTS
O&M of
BTS Interval Type 1~30 1~30 min 15 15 BTS
E1PORT0(E1
PORT0),
A Interface E1PORT1(E1
Protocol PORT1),
Process Interval Type E1PORT2(E1
180~1260 180~1260 s 720 720 SCCP
PORT2),
E1PORT3(E1 E1PORT0,
PORT3), E1PORT1,
BTS Test
OPTICALPORT E1PORT2,
Function Interval Type 1~60 1~60 min None None None
0(OPTICAL E1PORT3,
PORT0), OPTICAL
MAINDOMU(M
OPTICALPORT PORT0,
AIN DOMU),
O&M of Enumeration 1(OPTICAL OPTICAL
SLAVEDOMU1( MAINDOM
BTS Type PORT1) PORT1 None None None None
SLAVE U,
DOMU1), SLAVEDO
SLAVEDOMU2( MU1,
O&M of Enumeration SLAVE SLAVEDO
BTS Type DOMU2) MU2 None None None None
A Interface
Protocol
Process Interval Type 60~600 60~600 s 90 90 SCCP
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~23 0~23 dB 4 4 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~23 0~23 dB 10 10 Cell
IBCA
(Interferenc
e Based
Channel Enumeration NO(No),
Allocation) Type YES(Yes) NO, YES None NO NO Cell
IBCA
(Interferenc
e Based
Channel 0~10,
TCH:480~
Allocation) Interval Type 0~20 Step: 0.5 s 4 4 Cell
IBCA 1920,
(Interferenc step:480;
e Based SDCCH:4
Channel 70~1880,
Allocation) Interval Type 1~4 step:470 ms 4 4 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~14 0~14 dB 0 0 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~14 0~14 dB 4 4 Cell
YES for the
neighboring
cell with co-
channel
interference
and the
IBCA
neighboring
(Interferenc
cell that may
e Based
cause
Channel
interference;
Allocation) Interval Type 0~63 0~63 dB 7 7 Cell
IBCA set this
(Interferenc parameter to
e Based NO for other
Channel Enumeration NO(No), neighboring
Allocation) Type YES(Yes) NO, YES None NO cells. Cell
IBCA
(Interferenc
e Based
Channel 0~10,
Allocation) Interval Type 0~20 Step: 0.5 s 0 0 Cell
IBCA
(Interferenc
e Based OFF(Not
Channel Enumeration Allowed),
Allocation) Type ON(Allowed) OFF, ON None OFF OFF Cell
IBCA
(Interferenc
e Based OFF(Not
Channel Enumeration Allowed),
Allocation) Type ON(Allowed) OFF, ON None OFF OFF Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~23 0~23 dB 10 10 Cell
IBCA
(Interferenc
e Based
Channel 0~10,
Allocation) Interval Type 0~20 Step: 0.5 s 2 2 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~23 0~23 dB 13 13 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~31 0~31 dB 10 10 Cell
IBCA
(Interferenc
e Based
Channel Enumeration NO(No),
Allocation) Type YES(Yes) NO, YES None YES YES Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 2~600 2~600 s 4 4 BSC
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~63 0~63 dB 0 0 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~63 0~63 dB 0 0 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~22 0~22 dB 0 0 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~22 0~22 dB 0 0 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~63 0~63 dB 4 4 Cell
IBCA 0(Max.
(Interferenc optimized
e Based MAIO),
Channel Enumeration 1(Randomizatio
Allocation) Type n MAIO) 0, 1 None 0 0 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 5~40 5~40 None 20 20 Cell
IBCA
(Interferenc
e Based
Channel Enumeration NO(No),
Allocation) Type YES(Yes) NO, YES None NO NO Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~63 0~63 dB 0 0 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~30 0~30 dB 7 7 Cell
IBCA
(Interferenc
e Based
Channel 0~10,
Allocation) Interval Type 0~20 Step: 0.5 s 9 9 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~16 0~16 None 4 4 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~63 0~63 None 0 0 Cell
It is
recommend
ed that you
set the path
loss offset of
IBCA
layer 1
(Interferenc
neighboring
e Based
cells of the
Channel
serving cell
Allocation) Interval Type 2~600 2~600 s 8 8 BSC
IBCA to 15 dB and
(Interferenc that of other
e Based neighboring
Channel cells to 25
Allocation) Interval Type 0~50 0~50 dB 15 dB. Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~10 0~10 None 6 6 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~63 0~63 dB 4 4 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~160 0~160 dB 110 110 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~23 0~23 dB 1 1 Cell
IBCA
(Interferenc
e Based
Channel Enumeration NO(No),
Allocation) Type YES(Yes) NO, YES None NO NO Cell
IBCA
(Interferenc
e Based OFF(Not
Channel NO(Disabled in
Enumeration Allowed),
Allocation) Type OL and UL
ON(Allowed) OFF, ON None OFF OFF Cell
IBCA
subcell),
(Interferenc
UNDER(Enable
e Based
d in UL subcell),
Channel
INNER( Enable
Allocation) Interval Type 0~63 0~63 None 20 20 Cell
IBCA d in OL
(Interferenc subcell), NO,
e Based YES(Enabled in UNDER,
Channel Enumeration OL and UL INNER,
Allocation) Type subcell) YES None UNDER UNDER Cell
IBCA
(Interferenc
e Based
Channel Enumeration NO(No),
Allocation) Type YES(Yes) NO, YES None NO NO Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~23 0~23 dB 5 5 Cell
For
SingleRAN
BTS, the
recommend
ed value is
Intelligent NO(NO),
"ENABLE".
Combiner Enumeration YES(YES), NO, YES,
For other
Bypass Type NULL(NULL) NULL None NO NO Cell
types of
DISABLE(DISA BTS, the
BLE), recommend
O&M of Enumeration ENABLE(ENAB DISABLE, ed value is
BTS Type LE) ENABLE None ENABLE "DISABLE". BTS
O&M of
BSC Interval Type 1~30 1~30 None None None BSC6900
1~30,
O&M of 1~30,100~3276 100~3276
BSC Interval Type 7 7 None None None BSC6900
O&M of
BTS Interval Type 0~65535 0~65535 None None None BTS
SDCCH
Dynamic
Adjustment Interval Type 0~63 0~63 None 2 2 Cell
BYIDX(By
Index),
O&M of Enumeration BYNAME(By BYIDX,
BTS Type Name) BYNAME None None None BSC6900
BYNAME(By
O&M of Enumeration Name), BYNAME,
BTS Type BYID(By Index) BYID None None None BSC6900
Configurati
on BYNAME(By
Manageme Enumeration Name), BYNAME,
nt Type BYID(By Index) BYID None None None Cell
Configurati BYNAME(By
on name), BYNAME,
Manageme Enumeration BYID(By index), BYID,
nt Type BYCGI(By CGI) BYCGI None None None BSC
MBSC BYNAME(By
Load Enumeration Name), BYNAME,
Balancing Type BYID(By Index) BYID None None None Cell
Configurati
on BYNAME(By
Manageme Enumeration Name), BYNAME,
nt Type BYID(By Index) BYID None None None Cell
BYNAME(By
O&M of Enumeration Name), BYNAME,
BTS Type BYID(By Index) BYID None None None None
BYNAME(By
O&M of Enumeration Name), BYNAME,
BTS Type BYID(By Index) BYID None None None None
Semi-
Permanent
Connection Interval Type 0~255 0~255 None None None BSC
Configurati BYTLLI(By
on TLLI),
Manageme Enumeration BYIMSI(By BYTLLI, Subsyste
nt Type IMSI) BYIMSI None None None m
BYCELL(By
Cell),
O&M of Enumeration BYBSC(By BYCELL,
BSC Type BSC) BYBSC None None None BSC
Short
Message
Service Cell
Broadcast Enumeration YES(Yes),
(TS23) Type NO(No) YES, NO None YES YES Cell
O&M of
BTS Interval Type 0~15 0~3071 None None None IP route
Positive(Positiv
O&M of Enumeration e), Positive,
BTS Type Minus(Minus) Minus None Positive Positive BTS
O&M of
BTS Interval Type 0~125 0~125 None 0 0 BTS
NO(Not
Report),
O&M of Enumeration YES(Need
BTS Type Report) NO, YES None YES YES None
Fast Move
Handover Interval Type 0~32 0~32 None 1 1 Cell
O&M of 1~15
BSC String Type None characters None None None BSC
A Interface
Protocol 1000~300
Process Interval Type 1000~30000 00 ms 5000 5000 Cell
Assignment
and
Immediate Enumeration NO(NO),
Assignment Type YES(YES) NO, YES None NO NO Cell
Packet
Assignment NO(Not
Taken Over Enumeration Support),
by the BTS Type YES(Support) NO, YES None NO NO Cell
Assignment
and
Immediate Enumeration NO(No),
Assignment Type YES(Yes) NO, YES None NO NO Cell
Assignment
and
Immediate
Assignment Interval Type 0~254 0~254 ms 4 4 Cell
Assignment
and
Immediate
Assignment Interval Type 1~5 1~5 None 2 2 Cell
Assignment
and
Immediate Enumeration NO(No),
Assignment Type YES(Yes) NO, YES None NO NO Cell
Concentric
Cell Interval Type 0~255 0~255 bit 0 0 Cell
Soft-
Synchroniz Enumeration NO(NO),
ed Network Type YES(YES) NO, YES None NO NO BSC6900
Assignment
and
Immediate
Assignment Interval Type 0~255 0~255 s 10 10 Cell
O&M of 1~15
BSC String Type None characters None None None BSC
1~15 Subsyste
GPRS String Type None characters None None None m
HUAWEI I
Handover
HUAWEI II 500~6000
Handover Interval Type 500~60000 0 ms 10000 10000 Cell
Soft-
Synchroniz
ed Network Interval Type 0~8 0~8 bit 4 4 BSC6900
Soft-
Synchroniz
ed Network Interval Type 1~30 1~30 d 3 3 BSC6900
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~360 0~360 degree 360 360 Cell
O&M of
BTS Interval Type 0~62 0~62 None None None BTS
O&M of Enumeration NO(NO),
BTS Type YES(YES) NO, YES None NO NO BTS
AMR
FR/HR
Dynamic 0.5~16,
Adjustment Interval Type 1~32 step:0.5 s 8 8 Cell
AMR
FR/HR
Dynamic 0.5~16,
Adjustment Interval Type 1~32 step:0.5 s 10 10 Cell
CELLCAPCLA CELLCAP
MBSC SS, CLASS,
Load NACCRELATE NACCREL CELLCAPCL CELLCAPC
Balancing Bit Field Type D ATED None ASS LASS BSC
Faulty
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None OPEN None Board
AMR
FR/HR
Dynamic
Adjustment Interval Type 0~39 0~39 None 25 25 Cell
TS0, TS1,
AMR TS2, TS3,
FR/HR TS4, TS5,
Dynamic TS6, TS7,
Adjustment Interval Type 0~39 0~39
TS8, TS9, None 12 12 Cell
Enhanced TS10,
Channel TS11,
Assignment TS12,
Algorithm Interval Type 0~50 TS13,
0~50 W 8 8 TRX
TS14,
TS15,
TS16,
TS0, TS1, TS2, TS17,
AMR FR Interval Type 0~3
TS3, TS4, TS5, 0~3
TS18, None 1 1 Cell
TS6, TS7, TS8, TS19,
TS9, TS10, TS20,
TS11, TS12, TS21,
AMR HR Interval Type TS13,
0~3 TS14, TS22,
0~3 None 0 0 Cell
TS15, TS16, TS23,
TS17, TS18, TS24,
TS19, TS20, TS25,
TS21, TS22, TS26,
WB AMR Interval Type 0~2 0~2 None 2 2 Cell
TS23, TS24, TS27,
TS25, TS26, TS28,
Semi- TS27, TS28, TS29,
Permanent TS29, TS30, TS30,
Connection Bit Field Type TS31 TS31 None None None BSC
Enhanced
Dual-Band Enumeration NO(No),
Network Type YES(Yes) NO, YES None NO NO Cell
Enhanced
Dual-Band Enumeration NO(No),
Network Type YES(Yes) NO, YES None YES YES Cell
Configurati
on
Manageme
nt Interval Type 0~2047 0~2047 None None None BSC6900
Configurati
on
Manageme 1~64
nt String Type None characters None None None BSC6900
Enhanced
Dual-Band Enumeration NO(No),
Network Type YES(Yes) NO, YES None NO NO Cell
Enhanced
Dual-Band
Network Interval Type 1~255 1~255 s 10 10 Cell
Enhanced
Dual-Band
Network Interval Type 0~63 0~63 dB 5 5 Cell
Enhanced
Dual-Band
Network Interval Type 0~100 0~100 per cent 90 90 Cell
Semi-
Permanent
Connection Interval Type 0~335 0~335 None None None BSC
O&M of
BTS Interval Type 0~23 0~23 None None None BTS
O&M of
BSC Interval Type 0~15 0~15 None None None BTS
Degree(Degree
),
BSS-Based D_min_sec(De Degree,
LCS (Cell Enumeration gree Minute D_min_se
ID + TA) Type Second) c None Degree Degree Cell
SDCCH Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
Semi-
Permanent
Connection Interval Type 0~27 0~27 None None None BSC
O&M of
BTS Interval Type 0~23 0~23 None None None BTS
Semi-
Permanent
Connection Interval Type 0~11 0~11 None None None BSC
O&M of
BTS Interval Type 0~254 0~254 None None None BTS
Simplified
Cell
Broadcast Interval Type 2~3600 2~3600 s None 60 Cell
HUAWEI I
Handover
HUAWEI II In densely
Handover Interval Type 0~127 0~127 dB 67 populated 67 Cell
urban areas,
INTBANI(INTB
the
Cell ANI),
recommend
Frequency Enumeration INTBANII(INTB INTBANI,
ed value is
Scan Type ANII) INTBANII None INTBANII INTBANII Cell
4; in the
HUAWEI I suburbs, the
Handover recommend
HUAWEI II ed value is
Handover Interval Type 0~63 0~63 dB 4 8. Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~255 0~255 s 15 15 Cell
HUAWEI II 0.5~8,
Handover Interval Type 1~16 step:0.5 s 2 2 Cell
HUAWEI II 0.5~8,
Handover Interval Type 1~16 step:0.5 s 3 3 Cell
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None YES YES Cell
Enhanced
Channel
Assignment Enumeration NO(No),
Algorithm Type YES(Yes) NO, YES None YES YES Cell
Enhanced
Channel
Assignment
Algorithm Interval Type 48~115 48~115 None 110 110 Cell
Enhanced
Channel
Assignment
Algorithm Interval Type 48~115 48~115 None 105 105 Cell
Enhanced
Channel
Assignment
Algorithm Interval Type 48~115 48~115 None 98 98 Cell
Enhanced
Channel
Assignment
Algorithm Interval Type 48~115 48~115 None 92 92 Cell
Enhanced
Channel
Assignment
Algorithm Interval Type 48~115 48~115 None 87 87 Cell
Enhanced
Channel
Assignment
Algorithm Interval Type 48~115 48~115 None 85 85 Cell
Soft-
Synchroniz
ed Network Interval Type 0~60 0~60 d 3 3 BSC6900
Enhanced
GSM/WCD
Channel 480~1488
MA
Assignment 0, step:
Interoperabi
Algorithm Interval Type 1~31 480 ms 20 20 Cell
lity
GSM/TD-
SCDMA
Interoperabi Enumeration NO(No),
lity Type YES(Yes) NO, YES None NO NO Cell
MBSC
Load
Balancing Interval Type 1~100 1~100 None 80 80 BSC
GSM/WCD
MA
Interoperabi
lity
GSM/TD-
SCDMA
Interoperabi Enumeration NO(No),
lity Type YES(Yes) NO, YES None NO NO Cell
MBSC
Load
Balancing Interval Type 1~49 1~49 dB 20 20 BSC
MBSC
Load
Balancing Interval Type 0~49 0~49 dB 49 49 BSC
MBSC
Load
Balancing Interval Type 1~49 1~49 dB 5 5 BSC
MBSC
Load
Balancing Interval Type 1~91 1~91 dB 60 60 BSC
MBSC
Load
Balancing Interval Type 0~91 0~91 dB 91 91 BSC
Service-
GSM/WCD
MBSC based(Service-
MA
Load based), Load-
Interoperabi
Balancing Interval Type based(Load-
1~91 1~91 dB 10 10 BSC
lity
based),
GSM/TD-
Dynamic-
SCDMA
based(Dynamic
Interoperabi EnumerationNO(No),
Service/Load-
lity Type YES(Yes) NO, YES None NO NO Cell
based),
CnService-
MBSC based(CN
Load Enumeration Service-based),
Balancing Type OFF(OFF) {0~4} None OFF OFF BSC
O&M of
BSC
Security
Manageme
nt Interval Type 1~240 1~240 h 72 72 BSC6900
Processing
of
Measureme
Ethernet
nt Report
OAM Interval Type 1~10 1~10 s 1 1 BSC6900
Pre-
processing
of
Measureme
nt Report Interval Type 0~31 0~31 None 1 1 Cell
Enhanced
Dual-Band
Network Interval Type 0~63 0~63 dB 30 30 Cell
In the hot-
spot areas,
densely
HUAWEI I 500~6000 populated
Handover Interval Type 500~60000 0 ms None None
urban areas, Cell
HUAWEI I urban areas,
Handover suburbs,
HUAWEI II 500~6000 and rural
Handover Interval Type 500~60000 0 ms 10000 areas, 10000
the Cell
recommend
AMR
ed value is
FR/HR
YES; in the
Dynamic Enumeration NO(No),
high-speed
Adjustment Type YES(Yes) NO, YES None YES YES Cell
circumstanc
HUAWEI I es, the
Handover recommend
HUAWEI II Enumeration NO(No), ed value is
Handover Type YES(Yes) NO, YES None NO NO. Cell
HUAWEI I
Handover
HUAWEI II 500~6000
Handover Interval Type 500~60000 0 ms 10000 10000 Cell
MBSC
Load Enumeration NO(No),
Balancing Type YES(Yes) NO, YES None None None BSC
MBSC
Load
Balancing Interval Type 0~49 0~49 dB 25 25 BSC
MBSC
Load
Balancing Interval Type 1~255 1~255 s 10 10 BSC
MBSC
Load
Balancing Interval Type 0~91 0~91 dB 30 30 BSC
Semi-
Permanent
Connection Interval Type 0~255 0~255 None None None BSC
O&M of
BSC Interval Type 0~31 0~31 None None None BTS
O&M of
BSC Interval Type 1~1440 1~1440 min 30 None BSC6900
O&M of
BSC Interval Type 30~1024 30~1024 d None None BSC6900
Enhanced
Measureme
nt
Report(EM Enumeration NO(No),
R) Type YES(Yes) NO, YES None NO NO Cell
Configurati
on 0.0.0.0~25
Manageme IP Address 5.255.255.
nt Type None 255 None None None None
0.0.0.0~25
O&M of IP Address 5.255.255.
BSC Type None 255 None None None BSC6900
0.0.0.0~25
IP Address 5.255.255.
Gb over IP Type None 255 None None None NSE
0.0.0.0~25
IP Address 5.255.255.
Gb over IP Type None 255 None None None NSE
0.0.0.0~25
Abis over IP Address 5.255.255. 255.255.255. 255.255.255
IP Type None 255 None 255 .255 BTS
0.0.0.0~25
O&M of IP Address 5.255.255.
BTS Type None 255 None None None None
0.0.0.0~25
IP Address 5.255.255.
IP QOS Type None 255 None None None IP path
IP-Based
2G/3G Co-
Transmissio 0.0.0.0~25
n on MBSC IP Address 5.255.255.
Side Type None 255 None None None BSC6900
IP-Based
2G/3G Co-
Transmissio 0.0.0.0~25
n on MBSC IP Address 5.255.255. Ethernet
Side Type None 255 None None None port
0.0.0.0~25
IP Address 5.255.255. Ethernet
None Type None 255 None None None port
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None BSC6900
0.0.0.0~25
Link IP Address 5.255.255. Ethernet
aggregation Type None 255 None None None port
0.0.0.0~25
IP Address 5.255.255.
Gb over IP Type None 255 None None None BSC
0.0.0.0~25
IP Address 5.255.255.
Gb over IP Type None 255 None None None BSC
0.0.0.0~25
Clock over IP Address 5.255.255.
IP Type None 255 None None None BTS
0.0.0.0~25
IP Address 5.255.255.
Gb over IP Type None 255 None None None BSC
0.0.0.0~25
Clock over IP Address 5.255.255.
IP Type None 255 None None None BTS
0.0.0.0~25
IP Address 5.255.255.
Gb over IP Type None 255 None None None BSC
0.0.0.0~25
IP Address 5.255.255.
Gb over IP Type None 255 None None None BSC
Ethernet Ethernet
OAM Interval Type 0~100 0~100 per cent 10 10 port
Ethernet Ethernet
OAM Interval Type 0~100 0~100 per cent 5 5 port
No_HC(No_HC
),
UDP/IP_HC(UD No_HC,
Abis IP P/IP_HC), UDP/IP_H
over E1/T1 RTP/UDP/IP_H C,
No_HC(No_HC
A IP over Enumeration C(RTP/UDP/IP RTP/UDP/I
),
E1/T1 Type _HC) P_HC None UDP/IP_HC UDP/IP_HC PPP link
UDP/IP_HC(UD No_HC,
Abis IP P/IP_HC), UDP/IP_H
over E1/T1 RTP/UDP/IP_H C,
A IP over Enumeration C(RTP/UDP/IP RTP/UDP/I
E1/T1 Type _HC) P_HC None UDP/IP_HC UDP/IP_HC MP group
Ethernet
None Interval Type 0~5 0~5 None None None port
Link Ethernet
aggregation Interval Type 0~5 0~5 None None None port
Abis MUX
UDP MUX
for A
Transmissio
n Interval Type 0~12999 0~12999 None None None None
IP_OVER_
IP_OVER_FE/ FE/GE,
Abis over Enumeration GE, IP_OVER_ IP_OVER_F IP_OVER_F
IP Type IP_OVER_E1 E1 None E/GE E/GE BTS
IP_OVER_FE/
GE(IP_OVER_ IP_OVER_
FE/GE), FE/GE,
Abis over Enumeration IP_OVER_E1(I IP_OVER_
IP Type P_OVER_E1) E1 None None None BTS
Soft-
Synchroniz Enumeration NO(NO),
ed Network Type YES(YES) NO, YES None None NO BSC6900
NO(Not
Enumeration support),
EGPRS Type YES(Support) NO, YES None YES YES Cell
Transmissi
on
Enumeration NO(NO), resource
IP QOS Type YES(YES) NO, YES None None None group
NO(Not
Enumeration support),
GPRS Type YES(Support) NO, YES None YES YES Cell
Configurati
on
Manageme Enumeration NO(No),
nt Type YES(Yes) NO, YES None NO NO TRX
Enumeration NO(No),
TC Pool Type YES(Yes) NO, YES None None None BSC
STATIC(Static),
Enumeration DYNAMIC(Dyn STATIC,
Gb over IP Type amic) DYNAMIC None None None NSE
Abis MUX
UDP MUX
for A
Transmissio Enumeration NO(NO),
n Type YES(YES) NO, YES None None None IP Path
Soft-
Synchroniz Enumeration NO(NO),
ed Network Type YES(YES) NO, YES None NO NO BSC6900
YES(Configure)
O&M of Enumeration , NO(Not
BTS Type Configure) YES, NO None None None None
Abis
Transmissio Enumeration NO(NO),
n Backup Type YES(YES) NO, YES None NO NO BTS
Enumeration NO(No),
TC Pool Type YES(Yes) NO, YES None NO NO BSC
Configurati
on
Manageme Enumeration YES(YES),
nt Type NO(NO) YES, NO None None None None
Configurati
on
Manageme Enumeration NO(NO),
nt Type YES(YES) NO, YES None NO NO None
CONVERT0(On
Enumeration ly convert at
PPP(PPP),
OVERLAID(Ov
IP QOS Type UL),
MP(MP) PPP, MP None None None IP route
erlaid Subcell),
CONVERT1(On
UNDERLAID(U OVERLAI
ly convert at CONVERT
nderlaid D,
OL), 0,
Concentric Enumeration Subcell), UNDERLA
CONVERT2(UL CONVERT
Cell Type NONE(None) ID, NONE None NONE NONE TRX
first and convert 1,
allowed), CONVERT
CONVERT3(OL 2,
Concentric Enumeration first and convert CONVERT
Cell Type allowed) 3 None CONVERT0 CONVERT0 Cell
Concentric 0.5~16,
Cell Interval Type 1~32 step:0.5 s 8 8 Cell
Normal_cell(No
rmal Cell),
Concentric 0.5~16,
Concentric_cell
Cell Interval Type 1~32 step:0.5 s 10 10 Cell
Concentric (Concentric Normal_ce
Cell Cell), ll,
Enhanced EDB_cell(Enha Concentric
Dual-Band Enumeration nced Double _cell,
Network Type Frequency Cell) EDB_cell None Normal_cell Normal_cell Cell
Enumeration OFF(OFF),
None Type ON(ON) OFF, ON None None OFF Board
Hexadecimal(H
ex decimal), Hexadeci
Character_Strin mal,
Enumeration g(Character Character Character_St Character_S
None Type String) _String None ring tring None
0~124
None String Type None characters None None SBS 155 Board
0~124
None String Type None characters None None SBS 155 Board
NULL,
1byte,
Enumeration NULL, 1byte, 16byte,
None Type 16byte, 64byte 64byte None None 16byte Board
Enumeration OFF(OFF),
None Type ON(ON) OFF, ON None None OFF Board
Hexadecimal(H
ex decimal), Hexadeci
Character_Strin mal,
Enumeration g(Character Character Character_St Character_S
None Type String) _String none ring tring None
0~124
None String Type None characters None None SBS 155 Board
0~124
None String Type None characters None None SBS 155 Board
NULL,
1byte,
Enumeration NULL, 1byte, 16byte,
None Type 16byte, 64byte 64byte None None 16byte Board
Channeliz
Enumeration OFF(OFF), ed optical
None Type ON(ON) OFF, ON None None OFF port
Hexadecimal(H
ex decimal), Hexadeci
Character_Strin mal,
Enumeration g(Character Character
None Type String) _String None None None None
NULL,
NULL, 1BYTE, 1BYTE, Channeliz
Enumeration 16BYTE, 16BYTE, ed optical
None Type 64BYTE 64BYTE None None None port
0~64
None String Type None characters None None None None
Channeliz
0~64 ed optical
None String Type None characters None None None port
BSS-Based
LCS (Cell 1~5
ID + TA) String Type None characters degree None None Cell
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~90 0~90 degree None None Cell
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~90 0~90 degree None None Cell
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~59 0~59 minute None None Cell
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~9 0~9 second None None Cell
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~59 0~59 second None None Cell
- -90~90,
90000000~900 step:
None Interval Type 00000 0.000001 degree None None None
-
90:00:00.0
00~90:00:
None String Type None 00.000 SEC None None None
100~1000
0, IP logical
IP QOS Interval Type 1~100 step:100 ms 2 2 port
IP logical
IP QOS Interval Type 0~100 0~100 None 4 4 port
IP logical
IP QOS Interval Type 0~10000 0~10000 ms 25 25 port
IP logical
IP QOS Interval Type 0~15 0~15 None 3 3 port
IP logical
IP QOS Interval Type 0~15 0~15 None 8 8 port
HUAWEI I
Handover
HUAWEI II Enumeration
Handover Type 1, 2, 3, 4 1, 2, 3, 4 None 3 3 Cell
HUAWEI I
Handover
HUAWEI II Enumeration
Handover Type 1, 2, 3, 4 1, 2, 3, 4 None 3 3 Cell
Enumeration ON(ON),
None Type OFF(OFF) ON, OFF None None ON BSC6900
Processing
of
Measureme
Ethernet Ethernet
nt Report
OAM Interval Type 0~7 0~7 None 0 0 port
Pre-
processing NO(Not
of Support),
Measureme Enumeration YES(Support), NO, YES,
nt Report Type NONE(Invalid) NONE None YES None Cell
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None YES YES Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~63 0~63 dB 2 2 Cell
OAM,
TDM_Swit
ching,
GCP,
RGCP,
HUAWEI I MCP,
Handover OAM, GTC,
TDM_Swit
HUAWEI II TDM_Switching GPCU,
0.5~16, IP,
ching,
Handover Interval Type ,1~32
GCP, RGCP, FR,
GCP,
HDLC,
step:0.5 s 4 4 Cell
MCP, GTC, TDM,
HUAWEI I RGCP,
GPCU, IP, FR, GbIP,
Handover MCP,
HDLC, TDM, Abis_TDM
HUAWEI II TDM_Switching GTC,
0.5~16,
GbIP, ,
Handover Interval Type ,1~32
GCP, RGCP, GPCU,
step:0.5IP, s 6 6 Cell
Abis_TDM, Ater_TDM,
MCP, GTC, FR, HDLC,
Configurati Ater_TDM, Pb_TDM,
GPCU, IP, FR, TDM,
on Pb_TDM, A_TDM,
HDLC, TDM, GbIP,
Manageme Enumeration A_TDM, Abis_IP,
GbIP, Abis_TDM
nt Type Abis_IP, SAU SAU None None None None
Abis_TDM, ,
Configurati Ater_TDM, Ater_TDM,
on Pb_TDM, Pb_TDM,
Manageme Enumeration A_TDM, A_TDM,
nt Type Abis_IP Abis_IP None None None None
Abis IP
over E1/T1
A IP over Enumeration
E1/T1 Type IP, Abis_IP IP, Abis_IP None None None Board
Configurati
on A/Gb, A/Gb,
Manageme Enumeration Abis/Ater/Pb/G Abis/Ater/
nt Type b Pb/Gb None None None None
O&M of 5120~537
BSC Interval Type 5120~5375 5 None None None None
O&M of
BTS Interval Type 0~99 0~99 None 10 10 BTS
Faulty
Manageme
nt Interval Type 90~99 90~99 per cent 90 90 None
Faulty
Manageme
nt Interval Type 70~95 70~95 per cent 70 70 None
O&M of
BSC Interval Type 0~17407 0~17407 None None None LAPDLNK
O&M of
BTS Interval Type 0~40 0~40 V 35 35 BTS
O&M of
LUCENT_MOD LUCENT_
BTS Interval Type 40~80 40~80 V 45 45 BTS
E, MODE,
HUAWEI_MOD HUAWEI_
E,
B0000(B0000), MODE,
B0000,
Enumeration ALCATEL_MO
B0001(B0001), ALCATEL_
B0001,
None Type DE
B0010(B0010), MODE
B0010, None None None Board
8K(8Kbit/s),
B0011(B0011),
16K(16Kbit/s), B0011,
Semi- B0100(B0100),
32K(32Kbit/s), B0100,
8K, 16K,
B0000(B0000),
M3UA_MASTE B0000,
Permanent Enumeration B0101(B0101),
64K(64Kbit/s),
B0001(B0001),
B0101,
32K, 64K,
B0001,
R_MOD(M3UA
Connection Type B0110(B0110),
2M(2Mbit/s) B0110,
2M None None None BSC
B0010(B0010),
_MASTER_MO B0010,
M3UA_MA
B0111(B0111), B0111,
B0011(B0011),
D), B0011,
STER_MO
B1000(B1000), B1000,
B0100(B0100),
M3UA_SLAVE_ B0100,
D,
B1001(B1001), B1001,
Enumeration B0101(B0101),
MOD(M3UA_S B0101,
M3UA_SL M3UA_MAS M3UA_MAS
B1010(B1010), B1010,
A over IP Type B0110(B0110),
LAVE_MOD) B0110,
AVE_MOD None TER_MOD TER_MOD BSC6900
B1011(B1011), B1011,
B0111(B0111), B0111,
B1100(B1100), B1100,
B1000(B1000), B1000,
A Interface B1101(B1101), B1101,
B1001(B1001), B1001,
Protocol Enumeration B1110(B1110), B1110,
B1010(B1010), B1010,
Process Type B1111(B1111) B1111 None B1111 B1111 SCCP
B1011(B1011), B1011,
B1100(B1100), B1100,
B1101(B1101), B1101,
Enumeration B1110(B1110), B1110,
A over IP Type B1111(B1111) B1111 None B1111 B1111 SCCP
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~100 0~100 per cent 80 80 Cell
RANDOMALG(
Random RANDOM
Algorithm), ALG,
Enumeration OTHERALG(M OTHERAL RANDOMAL RANDOMAL
MSC Pool Type S ID Algorithm) G None G G MSC
Network-
Controlled
Cell
Reselection
(NC2) Interval Type 1~10 1~10 s 4 4 BSC
O&M of
BTS Interval Type 0~1000 0~1000 None 100 100 BTS
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~255 0~255 s 10 10 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~63 0~63 dB 63 63 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 1~255 1~255 s 10 10 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 1~63 1~63 dB 5 5 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~63 0~63 dB 25 25 Cell
BSC Node
Redundanc
y Interval Type 0~65534 0~65534 None None None BSC
Abis IP
over E1/T1 0.0.0.0~25
A IP over IP Address 5.255.255.
E1/T1 Type None 255 None None None BSC6900
Abis IP
over E1/T1 0.0.0.0~25
A IP over IP Address 5.255.255.
E1/T1 Type None 255 None None None MP group
0.0.0.0~25
Abis IP IP Address 5.255.255.
over E1/T1 Type None 255 None None None BTS
0.0.0.0~25
Abis IP IP Address 5.255.255.
over E1/T1 Type None 255 None None None BTS
Multi-site
Cell Interval Type 0~35 0~35 None None None BTS
Multi-site
Cell Interval Type 0~35 0~35 None None None BTS
Faulty
Manageme 1~200
nt String Type None characters None None None BSC6900
0.0.0.0~25
IP Address 5.255.255.
A over IP Type None 255 None None None SCTP link
0.0.0.0~25
IP Address 5.255.255.
A over IP Type None 255 None None None SCTP link
O&M of
BSC
Security
Manageme Enumeration OFF(Unlock),
nt Type ON(Lock) OFF, ON None ON OFF BSC6900
1024~655
A over IP NORMMODE(N
Interval Type 1024~65535 35 None None None SCTP link
LFB(Load from
ormal Mode),
Configurati OMU and write
RAPMODENO NORMMO
on flash),
SERV(Rapid DE,
Manageme Enumeration CL(Consult
Mode<No RAPMOD
nt Type Load) LFB, CL None None None BSC6900
service>), ENOSERV
RAPMODERES ,
SERV(Rapid RAPMOD
O&M of Enumeration Mode<Reserve ERESSER NORMMOD
BTS Type BCCH trx>) V None NORMMODE E None
Flow
Control Interval Type 30~100 30~100 per cent 90 95 Board
Flow
Control Interval Type 30~100 30~100 per cent 90 80 Board
RM, DB_BAK,
HISTORY_FAU MEM_DB_
LT, BAK,
ALM_SYSTEM BTS_BASI
_CFG, C_INFO,
SECURITY_LO BTS_CHE
G, OPT_LOG, CK_LOG,
OMU_LOG, BTS_DEB
BSC_CFG_MM UG_LOG,
Enumeration L,
NO(NO), BTS_CHR
None Type CELL_BASIC_I
YES(YES) _LOG,
NO, YES None None None SCTP link
NFO, TRX_LOG
BSC_SERIES_ ,
NO, DB_BAK, BTS_NET
MEM_DB_BAK, _TABLE,
None Interval Type 0~988
BTS_BASIC_IN 0~988
DEBUG_L None None None SCTP link
FO, OG,
BTS_CHECK_L LAST_WO
OG, RD,
None Interval Type BTS_DEBUG_
0~5,8~27 DSP_DEB
0~5, 8~27 None None None SCTP link
LOG, UG_LOG,
BTS_CHR_LO HOST_LO
G, TRX_LOG, G,
Flow BTS_NET_TAB 2G_CHR_
Control Interval Type 30~100
LE, 30~100
LOG, per cent 80 85 Board
DEBUG_LOG, 2G_UNILA
LAST_WORD, TERAL_C
Flow DSP_DEBUG_ ONNECT,
Control Interval Type LOG,
30~100 BSC_INF
30~100 per cent 80 70 Board
HOST_LOG, O,
2G_CHR_LOG, GCSR_LO
2G_UNILATER G,
Flow Enumeration
AL_CONNECT, GPSR_LO
Control Type ON, OFF ON, OFF None ON ON Board
BSC_INFO, G,
GCSR_LOG, AIDG_LO
GPSR_LOG, G,
O&M of AIDG_LOG, BIOS_LO
BSC Bit Field Type BIOS_LOG G None None None BSC6900
COMLOG(Com
mon Log),
O&M of Enumeration CMPLOG(Com COMLOG,
BTS Type press Log) CMPLOG None None None None
BSS-Based
LCS (Cell 1~5
ID + TA) String Type None characters degree None None Cell
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~180 0~180 degree None None Cell
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~180 0~180 degree None None Cell
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~59 0~59 minute None None Cell
BSS-Based
LCS (Cell
ID + TA) Interval Type 0~9 0~9 second None None Cell
BSS-Based
LCS (Cell NSSAINTF(NS
ID + TA) Interval Type 0~59
S Interface 0~59 second None None Cell
Unit),
NSSTCTOABIS
- -180~180,
(NSS TC(Near step:
180000000~18
None Interval Type Abis Interface)), 0.000001
0000000 degree None None None
NSSTCTOA(NS
S TC(Near A -
Interface)), 180:00:00.
NSSTNUTOABI 000~180:0
None String Type None
S(NSS 0:00.000 SEC None None None
Configurati TNU(Near Abis
on Interface)),
Manageme NSSTNUTOA(
nt Interval Type NSS
1~3 TNU(Near 1~3 None None None None
A Interface)), NSSAINTF
BYLOCAL(By
NSSATERINTF ,
Local Loop),
(NSS Ater BYLOCAL,
NSSTCTO
Enumeration Interface
BYREMOTE(By BYREMO
Unit), ABIS,
None Type Remote Loop) TE
BSSATERINTF( NSSTCTO None None None BC
BSS Ater A,
Interface Unit), NSSTNUT
LOOPTYPE_T OABIS,
Enumeration BSSTCTOABIS
OFF(OFF),
DM(Line
(BSS Loop), LOOPTYP
TC(Near NSSTNUT
None Type ON(ON) OFF, ON None None ON E1/T1 port
LOOP_TYPE_L
Abis Interface)), E_TDM,
OA,
VDS(LVDS
BSSTCTOA(BS LOOP_TYNSSATERI
Loop),
S TC(Near A PE_LVDS,
NTF,
O&M of Enumeration LOOPTYPE_M
Interface)), LOOPTYP
BSSATERI
BSC Type NO_LOOP(No
CC(MCC Loop) E_MCC None None None LAPDLNK
IBCA BSSTNUTOABI NTF,
loop),
(Interferenc S(BSS BSSTCTO
REMOTE_LOO
e Based TNU(Near Abis ABIS,
P(Remote
Channel Interface)), BSSTCTO
loop), NO_LOOP
Allocation) Interval Type BSSTNUTOA(B
0~100
LINE_REM_LO 0~100
A,
, per cent 80 80 Cell
SS TNU(Near A BSSTNUT
OP(Line
MSC(MSC remote REMOTE_
Interface)), OABIS,
loop),
Direction), LOOP,
BSSABISINTF( BSSTNUT
O&M of Enumeration LOCAL_LOOP(
MS(MS LINE_RE
BSS Interface OA,
BSC Type Local loop),
Direction) MOTE_LO
MSC, MS None None None BSC
Unit), BSSABISI
PAYLOAD_LO OP,
BTSTMU(TMU/ NTF,
OP(payload LOCAL_L
PTU), BTSTMU,
loop), OOP,
O&M of Enumeration BTSTRUDSP(T BTSTRUD
SIN_CHN_LOC PAYLOAD
BSC Type RU DSP) SP None None None BSC
(single channel _LOOP,
local loop), SIN_CHN
SIN_CHN_REM _LOC,
Enumeration (single channel CIN_CHN
None Type remote loop) _REM None None None E1/T1 port
NO_LOOP(NO
_LOOP),
LOCAL_LOOP( NO_LOOP
LOCAL_LOOP) ,
, REMOTE_
REMOTE_LOO LOOP,
Enumeration P(REMOTE_L LOCAL_L Loopback
None Type OOP) OOP None None None optical port
O&M of
BSC Interval Type 60~600 60~600 s 180 180 BSC
IP logical
IP QOS Interval Type 1~100 1~100 None 1 1 port
Enumeration NO(No),
Flex Abis Type YES(Yes) NO, YES None NO NO Cell
Enumeration NO(NO),
Flex Abis Type YES(YES) NO, YES None NO NO BTS
O&M of degree
AMR
BTS Interval Type -99~99 -99~99 Celsius -1 -1 BTS
Coding
Rate
Threshold
Adaptive
AMR
Adjustment Interval Type 2~255 2~255 None 2 2 Cell
Coding
Rate
Threshold
Adaptive
AMR
Adjustment Interval Type 2~255 2~255 None 8 8 Cell
Coding
Rate
Threshold 14(1.4),
Adaptive 15(1.5),
AMR
Adjustment Interval Type 16(1.6),
2~255 2~255 None 60 60 Cell
Coding
18(1.8),
Rate
20(2.0),
Threshold 18(1.8),
22(2.2),
Adaptive 20(2.0),
24(2.4),
Adjustment Interval Type 22(2.2),
2~255 2~255 None 2 2 Cell
26(2.6), 14, 15, 16,
24(2.4),
28(2.8), 18, 20, 22, For
26(2.6),
30(3.0), 24, 26, 28, EPS4815,
28(2.8),
O&M of Enumeration 33(3.3), 30, 33, 36, the
30(3.0),
BTS Type 36(3.6), 88(8.8) 88 None 20 recommend 20 BTS
32(3.2), 18, 20, 22,
ed value is
35(3.5), 24, 26, 28,
"DISABLE".
38(3.8), 30, 32, 35,
For other
O&M of Enumeration 41(4.1), 38, 41, 45,
types of
BTS Type 45(4.5), 88(8.8) 88 None 30 30 BTS
APMU
DISABLE(DISA boards, the
BLE), recommend
O&M of Enumeration ENABLE(ENAB DISABLE, ed value is
BTS Type LE) ENABLE None ENABLE "ENABLE". BTS
1024~655
A over IP Interval Type 1024~65535 35 None 2905 2905 SCTP link
Configurati
on
Manageme
nt Interval Type 0~8191 0~8191 None None None None
Ethernet Ethernet
OAM Interval Type 0~100 0~100 per cent None 10 port
CA_MA(CA+M
A),
Ethernet Ethernet
Frequency Frequency_List
OAM Interval Type 0~100 0~100 per cent None 5 port
Hopping (Frequency CA_MA,
(RF List), Frequency
hopping, OPTIMIZED_C _List,
baseband Enumeration A_MA(Optimize OPTIMIZE
hopping) Type d CA+MA) D_CA_MA None CA_MA CA_MA Cell
Enhanced
Ethernet
BCCH
OAM Interval Type 0~499 0~499 None None None Board
Power
Consumptio
n
Enhanced
Optimizatio Enumeration NO(No),
BCCH
n Type YES(Yes) NO, YES None YES YES Cell
Power
Consumptio
n
Enhanced
Optimizatio Enumeration NO(No),
BCCH
n Type YES(Yes) NO, YES None NO NO Cell
Power
Consumptio
n
Enhanced
Optimizatio Compound 00:00~23:
BCCH
n Type hour, min 59 None None None Cell
Power
Consumptio
n
Enhanced
Optimizatio 0~3,
BCCH
n Interval Type 0~15 Step:0.2 dB 0 0 Cell
Power
Consumptio
n
Optimizatio Compound 00:00~23:
n Type hour, min 59 None 0:00 None Cell
O&M of 1~64
BTS String Type None characters None None None BTS
Multi-site
Cell Interval Type 0~35 0~35 None None None BTS
Tree
Topology Interval Type 0~1 0~1 None 0 0 BTS
O&M of
BTS Interval Type 0~9999 0~9999 None None None BTS
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~11 0~11 None None None Cell
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None BSC6900
0.0.0.0~25
IP Address 5.255.255. Ethernet
None Type None 255 None None None port
0.0.0.0~25
IP Address 5.255.255. Ethernet
None Type None 255 None None None port
Short
Message
Service Cell 0.0.0.0~25
Broadcast IP Address 5.255.255.
(TS23) Type None 255 None None None BSC
0.0.0.0~25
Abis over IP Address 5.255.255. 255.255.255. 255.255.255
IP Type None 255 None 255 .255 BTS
0.0.0.0~25
Abis IP IP Address 5.255.255.
over E1/T1 Type None 255 None None None BTS
0.0.0.0~25
Abis IP IP Address 5.255.255.
over E1/T1 Type None 255 None None None BTS
0.0.0.0~25
Clock over IP Address 5.255.255.
IP Type None 255 None None None BTS
0.0.0.0~25
Clock over IP Address 5.255.255.
IP Type None 255 None None None BTS
Enhanced
Power
Control
4(application
Algorithm Interval Type 0~32 0~32 dB 8 8 Cell
type is
M3UA),
10(applicatio
n type is
A over IP Interval Type 0~254 0~254 None None BBAP) SCTP link
64~10000 IP logical
IP QOS Interval Type 1~1562 0, step:64 kbit/s None None port
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 1~20 1~20 None 3 3 Cell
GPRS Interval Type 0~5 0~5 None 2 2 BSC
O&M of
BTS Interval Type 50~200 50~200 None 100 100 BSC
Abis IP
over E1/T1
A IP over
E1/T1 Interval Type 1~1500 1~1500 byte 256 256 PPP link
Security
Manageme
nt Interval Type 1~255 1~255 None None None BSC6900
Faulty
Manageme 10000~15
nt Interval Type 10000~150000 0000 None None None BSC6900
100~1000
O&M of 00 (step:
BTS Interval Type 1~1000 100) W 125 125 BTS
67C(0.67C), 35C, 36C,
68C(0.68C), 37C, 38C,
69C(0.69C), 39C, 40C,
70C(0.70C), 41C, 42C,
71C(0.71C), 43C, 44C,
72C(0.72C), 45C, 46C, 2(application
73C(0.73C), 47C, 48C, type is
74C(0.74C), 49C, 50C, M3UA),
75C(0.75C), 51C, 52C, 5(application
76C(0.76C), 53C, 54C, type is
A over IP Interval Type 0~254
77C(0.77C), 0~254
55C, 56C, None None BBAP) SCTP link
78C(0.78C), 57C, 58C,
79C(0.79C), 59C, 60C,
80C(0.80C), 61C, 62C,
GPRS Interval Type 81C(0.81C),
0~100 63C,
0~10064C, None 3 3 BSC
82C(0.82C), 65C, 66C,
83C(0.83C), 67C, 68C,
PDCH 84C(0.84C), 69C, 70C,
Dynamic 85C(0.85C), 71C, 72C,
Adjustment Interval Type 0~8
86C(0.86C), 0~8
73C, 74C, None 8 8 TRX
87C(0.87C), 75C, 76C,
PDCH 88C(0.88C), 77C, 78C,
Dynamic 89C(0.89C), 79C, 80C,
Adjustment Interval Type 90C(0.90C),
0~100 81C,
0~10082C, per cent 30 30 Cell
91C(0.91C), 83C, 84C,
92C(0.92C), 85C, 86C,
93C(0.93C), 87C, 88C,
94C(0.94C), 89C, 90C,
GPRS Interval Type 0~5 0~5 None 5 5 BSC
95C(0.95C), 91C, 92C,
5C(0.05C),
96C(0.96C), 93C, 94C,
7C(0.07C),
97C(0.97C), 95C, 96C,
10C(0.10C),
O&M of Enumeration 98C(0.98C), 97C, 98C,
12C(0.12C),
BTS Type 99C(0.99C) 99C None 15C 15C BTS
15C(0.15C), 5C, 7C,
18C(0.18C), 10C, 12C,
20C(0.2C), 15C, 18C,
O&M of Enumeration 22C(0.22C), 20C, 22C,
BTS Type 25C(0.25C) 25C None 15C 15C BTS
HUAWEI I
1_Times(1_Tim
Handover
es),
HUAWEI II
2_Times(2_Tim
Handover Interval Type 1~255 1~255 None 30 30 Cell
es),
4_Times(4_Tim 1_Times,
1_Times(1_Tim
es), 2_Times,
es),
Enumeration 7_Times(7_Tim 4_Times,
2_Times(2_Tim
Access Type es) 7_Times None 7_Times 7_Times Cell
es),
4_Times(4_Tim 1_Times,
1_Times(1_Tim
es), 2_Times,
es),
Enumeration 7_Times(7_Tim 4_Times,
2_Times(2_Tim
Access Type es) 7_Times None 7_Times 7_Times Cell
es),
4_Times(4_Tim 1_Times,
1_Times(1_Tim
es), 2_Times,
es),
Enumeration 7_Times(7_Tim 4_Times,
2_Times(2_Tim
Access Type es) 7_Times None 7_Times 7_Times Cell
es),
4_Times(4_Tim 1_Times,
es), 2_Times,
Enumeration 7_Times(7_Tim 4_Times,
Access Type es) 7_Times None 7_Times 7_Times Cell
Abis IP
over E1/T1
A IP over
E1/T1 Interval Type 1~746 1~746 byte 64 64 PPP link
Soft-
Synchroniz
ed Network Interval Type 0~2047 0~2047 None None None BSC6900
Soft-
Synchroniz 1~64
ed Network String Type None characters None None None BSC6900
Configurati
on
Manageme
nt String Type None 3 digit None None None Cell
Compact
BTS
Automatic 4(Use two
Capacity bytes
1~3 to
Planning String Type None present
characters None None None Cell
MC priority
Abis IP
number, 4
over E1/T1
classes),
A IP over
8(Use four
E1/T1 Interval Type 4,8 4, 8 None None None MP group
bytes to
present
MC priority
Abis IP number, 8
over E1/T1 Interval Type 4,8 classes) None 8 8 BTS
Configurati
on
Manageme
nt Interval Type 0~2047 0~2047 None None None BSC6900
O&M of 1~64
BTS String Type None characters None None None BSC6900
O&M of
BTS Interval Type 0~62 0~62 None None None BTS
Enhanced
Channel
Assignment Enumeration OFF(Off),
CLASS0(Class
Algorithm Type ON(On) ON, OFF None OFF OFF Cell
0),
CLASS1(Class
1), CLASS0,
O&M of Enumeration CLASS2(Class CLASS1,
BTS Type 2) CLASS2 None CLASS0 CLASS0 BTS
Ethernet
Ethernet
OAM Interval Type 0~7 0~7 None None None Board
OAM
Configurati
on
Manageme Ethernet
nt Interval Type 0~7 0~7 None 0 0 port
Packet
System Enumeration NO(No),
Information Type YES(Yes) NO, YES None NO NO Cell
EnhMeasRepor
MBSC
t(Enhanced
Load
Measurement
Balancing Interval Type 1~5 1~5 s 3 3 BSC
Enhanced Report),
Measureme ComMeasRepo EnhMeas
nt rt(Common Report,
Report(EM Enumeration Measurement ComMeas ComMeasRe ComMeasR
R) Type Report) Report None port eport Cell
Ethernet Ethernet
Ethernet
OAM Interval Type 1~1000 1~1000 None None None port
OAM
Configurati
on
Manageme Ethernet
nt Interval Type 1~8191 1~8191 None None None port
LocalMep(Local
Mep), LocalMep,
Ethernet Enumeration RemoteMep(Re RemoteMe Ethernet
OAM Type moteMep) p None None None port
Abis IP
over E1/T1 LONG(LONG),
A IP over Enumeration SHORT(SHOR LONG,
E1/T1 Type T) SHORT None LONG LONG MP group
LONG(Long
List Head),
Abis IP Enumeration SHORT(Short LONG,
over E1/T1 Type List Head) SHORT None LONG LONG BTS
Network-
Controlled
Cell
Reselection
(NC2) Interval Type 0~63 0~63 None 15 15 Cell
64~10000 IP logical
IP QOS Interval Type 1~1562 0, step:64 kbit/s None None port
GSM/WCD
MA
Interoperabi
lity Interval Type 0~49 0~49 dB 10 10 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~63 0~63 dB 0 0 Cell
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 0~2000 0~2000 mA 170 170 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 140 140 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 140 140 BTS
GSM/WCD
SDCCH
MA
Dynamic
Interoperabi
Adjustment Interval Type 60~3600 60~3600 s 60 60 Cell
lity
GSM/TD-
SCDMA
Interoperabi
lity Interval Type 0~63 0~63 dB 10 10 Cell
IP Fault
Detection
Based on Ethernet
BFD Interval Type 10~1000 10~1000 ms 30 30 port
IP Fault
Detection Current
Based on BFD
BFD Interval Type 10~1000 10~1000 ms 100 100 session
IP Fault
Detection
Based on Ethernet
BFD Interval Type 10~1000 10~1000 ms 30 30 port
IP Fault
Detection Current
Based on BFD
BFD Interval Type 10~1000 10~1000 ms 100 100 session
Ethernet
None Interval Type 0~11 0~11 None None None port
Ethernet
None Interval Type 0~11 0~11 None None None port
UP(upstream
mirror),
Enumeration DOWN(downstr UP, Ethernet
None Type eam mirror) DOWN None None None port
Configurati
on
Manageme
nt String Type None 2~3 digit None None None Cell
Compact
BTS
Automatic
Capacity 1~64
Planning String Type None characters None None None Cell
GSM Flow
Control Interval Type 50~95 50~95 per cent 80 80 BSC
MANUAL(Manu
al Handover),
AUTO(Auto MANUAL,
BSC/RNC Enumeration Handover), AUTO,
Clock Type FREE(Free-run) FREE None AUTO AUTO BSC6900
SERVER(SERV
ER MOD),
Enumeration CLIENT(CLIEN SERVER,
A over IP Type T MOD) CLIENT None None None SCTP link
Configurati
on
Manageme Enumeration OFF(OFF),
nt Type ON(ON) OFF, ON None None OFF BSC6900
Configurati GO(GSM),
on UO(UMTS),
Manageme Enumeration GU(GSM and GO, UO,
nt Type UMTS) GU None None None BSC6900
MODE1(1:1
Protection
Switching),
MODE2(1+1
Unidirectional
Protection
CHECK_O
Switching),
CHECK_ON_IN N_INDEP
MODE3(1+1
DEPENDENT_ ENDENT_
Bidirectional MODE1, MSP
PORT, PORT,
Board Enumeration Protection MODE2, protect
CHECK_ON_P CHECK_O
Switchover Type Switching) MODE3 None None None group
RIMARY_PORT N_PRIMA
IP Fault , RY_PORT,
Detection CHECK_ON_S CHECK_O
Based on Enumeration TANDBY_POR N_STAND
MODE1(Mode1
BFD Type T BY_PORT None None None None
),
MODE2(Mode2
Faulty ), MODE1,
Manageme Enumeration MODE3(Mode3 MODE2,
MODE1(Mode1
nt Type ) MODE3 None MODE1 MODE1 BTS
),
MODE2(Mode2
Faulty ), MODE1,
Manageme Enumeration MODE3(Mode3 MODE2,
MODE1(Mode1
nt Type ) MODE3 None MODE1 MODE1 BTS
),
MODE2(Mode2
Faulty ), MODE1,
Manageme Enumeration MODE3(Mode3 MODE2,
MODE1(Mode1
nt Type ) MODE3 None MODE1 MODE1 BTS
),
MODE2(Mode2
Faulty ), MODE1,
Manageme Enumeration MODE3(Mode3 MODE2,
MODE1(Mode1
nt Type ) MODE3 None MODE1 MODE1 BTS
),
MODE2(Mode2
Faulty ), MODE1,
Manageme Enumeration MODE3(Mode3 MODE2,
MODE1(Mode1
nt Type ) MODE3 None MODE1 MODE1 BTS
),
MODE2(Mode2
30MINS(30
Faulty ), MODE1,
Minutes),
Manageme Enumeration MODE3(Mode3 MODE2,
60MINS(60
nt Type ) MODE3 None MODE1 MODE1 BTS
Minutes),
120MINS(120 30MINS,
Minutes), 60MINS,
O&M of Enumeration 240MINS(240 120MINS,
BTS Type Minutes) 240MINS None None None None
O&M of
BTS Interval Type 1~1440 1~1440 h None None None
O&M of
BTS Interval Type 1~12 1~12 None None None BTS
Fast Move
Handover Interval Type 0~600 0~600 m/s 35 35 Cell
Abis IP Ethernet
over E1/T1 Interval Type 0~100 0~100 per cent 10 10 port
Abis IP Ethernet
over E1/T1 Interval Type 0~100 0~100 per cent 5 5 port
Abis IP 0~31(PEU
over E1/T1 a),
A IP over 0~167(PO
E1/T1 Interval Type 0~167 Uc) None None None MP group
MODE1_1
,
MODE2_1
None Interval Type 0~167 ,0~167 None None None None
MODE3_1
,
MODE1_1, MODE4_1
Abis IP
MODE2_1, ,
over E1/T1 Interval Type 0~3 0~3 None None None BTS
MODE3_1, MODE5_1
LAPD MODE4_1, ,
Multiplexing MODE5_1, MODE6_1
at Abis Enumeration MODE6_1, ,
Interface Type MODE16K MODE16K None MODE4_1 MODE4_1 BTS
O&M of
BTS Interval Type 0~1 0~1 None None None BTS
DISABLE(Disab
le),
Abis IP Enumeration ENABLE(Enabl DISABLE,
over E1/T1 Type e) ENABLE None ENABLE ENABLE BTS
Abis IP
over E1/T1
A IP over Enumeration MLPPP, MLPPP,
E1/T1 Type MCPPP MCPPP None MCPPP MCPPP MP group
Configurati
on
Manageme
nt Interval Type 0~27 0~27 None None None None
Configurati
on
Manageme
nt Interval Type 0~11 0~11 None None None None
Enhanced
Power
Control Enumeration NO(No),
Algorithm Type YES(Yes) NO, YES None YES YES Cell
HUAWEI I
Handover NOreport(Do
HUAWEI II not report),
Handover Interval Type Twice_ps(Twice
0~31 0~31 None 4 4 Cell
every second),
HUAWEI III
Once_ps(Once
Power
every second),
Control
Once_2s(Once
Algorithm Interval Type 1~255 1~255 None 5 5 Cell
Pre- every two NOreport,
processing second), Twice_ps,
of Once_4s(Once Once_ps,
Measureme Enumeration every four Once_2s,
nt Report Type second) Once_4s None Once_ps Once_ps Cell
O&M of
BTS Interval Type 4~22 4~22 dB 4 4 BTS
O&M of
BTS Interval Type 4~22 4~22 dB 4 4 BTS
OFF(Off),
ON_WITH_SD
O&M of Enumeration OFF(Off),
CCH(On with OFF,
BSC Type ON(On) OFF, ON None OFF OFF None
SDCCH), ON_WITH
ON_WITHOUT _SDCCH,
_SDCCH(On ON_WITH
O&M of Enumeration without OUT_SDC
BSC Type SDCCH) CH None None None BSC
Abis over
IP Interval Type 128~1500 128~1500 None 1500 1500 BTS
Soft-
Synchroniz
ed Network Interval Type 1~16 1~16 None 3 3 BSC6900
Enumeration OFF(Off),
Call Control Type ON(On) OFF, ON None OFF OFF Cell
MSC Pool Interval Type 0~65535 0~65535 None 1800 1800 MSC
Enumeration NO(No),
OFFLOAD(Offlo
MSC Pool Type YES(Yes) NO, YES None NO NO BSC
ad),
NORMAL(Norm OFFLOAD
al), ,
Enumeration UNAVAIL(Unav NORMAL,
MSC Pool Type ailable) UNAVAIL None NORMAL NORMAL MSC
R98_or_below( R98_or_b
A Interface R98 or below), elow,
Protocol Enumeration R99_or_above( R99_or_a R98_or_belo R98_or_bel
Process Type R99 or above) bove None w ow Cell
Call
Reestablish 5000~400
ment Interval Type 5000~40000 00 ms 15000 15000 Cell
O&M of 1~32
BSC String Type None characters None None None BSC
BSC Local
Switch
BTS Local 1~10
Switch String Type None characters None None None BSC
BSC Local
Switch
BTS Local 1~10
Switch String Type None characters None None None BSC
BSC Local
Switch
BTS Local 1~10
Switch String Type None characters None None None BSC
BSC Local
Switch
BTS Local 1~10
Switch String Type None characters None None None BSC
BSC Local
Switch
BTS Local 1~10
Switch String Type None characters None None None BSC
CLEAR(Cleare
BTS Local d), 1~32
Switch String Type None
LOP(Lockout of characters None None None BSC
Protection),
1_Times(1_Tim
FS(Forcibly
es),
Fast Move Enumeration switchover
NO(No),
2_Times(2_Tim
Handover Type working
YES(Yes) link to NO, YES None NO NO Cell
Radio es),
protection link),
Common 4_Times(4_Tim 1_Times,
MS(Manual
Channel es), 2_Times,
switchover from
Manageme Enumeration 7_Times(7_Tim 4_Times,
working link to
nt Type es) 7_Times None 4_Times 4_Times Cell
protection link),
MCS1(MCS1), MCS1,
EXERS(Exercis CLEAR,
MCS2(MCS2), MCS2,
ely switch LOP, FS, MSP
MCS3(MCS3), MCS3,
Board Enumeration working link to MS, protect
MCS4(MCS4), MCS4,
Switchover Type protection link) EXERS, None None None group
MCS5(MCS5), MCS5,
MCS6(MCS6), MCS6,
MCS7(MCS7), MCS7,
Enumeration MCS8(MCS8), MCS8,
MSRD Type MCS9(MCS9) MCS9 None MCS5 MCS5 Cell
O&M of
BTS Interval Type 0~254 0~254 None None None BTS
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~63 0~63 dB 10 10 Cell
Network-
Controlled
Cell
Reselection
(NC2) Interval Type 0~255 0~255 None 200 200 Cell
Gb
Interface 1000~300
Function Interval Type 1000~3000 0 ms 1000 1000 BSC
BSC Node
Redundanc
y Interval Type 1~600 1~600 s 45 45 BSC
Enumeration ON(ON),
None Type OFF(OFF) ON, OFF None None ON BSC6900
If "MTU" is
set to a
GSM Flow value
ALARM_METH
Control Interval Type 50~95 50~95 per cent 85 smaller than
85 BSC
OD(Alarm 576, the
method), ALARM_M DHCP
LOOP_METHO ETHOD, procedure
Enumeration D(Loop LOOP_ME may fail
None Type method) THOD None None None
when the E1/T1 port
0~31(EIUa BTS tries to
A Interface /OIUa), retrieve the
Protocol 0~63(POU IP address,
Process Interval Type 0~63 c) None None and
Nonethus the MTP3 link
BTS cannot
work. The
recommend
Enumeration MET(Metric), ed value of
None Type IMP(Imperial) MET, IMP None MET MET
this None
parameter is
1500. Do
not modify it
A over IP Interval Type 500~1500 500~1500 None 800 unless in 800 SCTP link
special
scenarios,
for example,
Ethernet
at the
None Interval Type 256~1650 256~1650 byte None 1500 port
bottom layer
where the
number of
Abis IP MTU is
over E1/T1 Interval Type 0~1500 0~1500 None 1500 limited. BTS
REPORT6(Rep
ort six), REPORT6
O&M of 19.0~24.0,
REPORT1(Rep ,
BTS Interval Type 190~240 step:0.1 V 225 225 BTS
ort one), REPORT1
REPORT2(Rep ,
ort two), REPORT2
Enumeration REPORT3(Rep ,
GPRS Type ort three) REPORT3 None REPORT6 REPORT6 Cell
O&M of
When the 5
BSC Interval Type 0~255 0~255 s None Cell
transmission
DISABLE(DISA quality is
BLE), good, the
O&M of Enumeration ENABLE(ENAB DISABLE, recommend
BSC Type LE) ENABLE None None DISABLE
ed settings Cell
are as
follows:
O&M of "Ring II Wait
BSC Interval Type 0~255 0~255 s None Time Before4 Cell
Switch" = 0;
"Ring II Try
Rotating
O&M of Duration
BSC Interval Type 0~15 0~15 min 0 Time" = 60; 0 Cell
"Ring II
Rotating
O&M of Enumeration NO(No), Penalty
BSC Type YES(Yes) NO, YES None NO Time"
NO = 0; Cell
"T200" = 12;
Abis IP "T203" = 1;
over E1/T1 and "N200"
A IP over = 3.
E1/T1 Interval Type 1~1500 1~1500 ls 1000 When the 1000 MP group
transmission
quality is
bad, the
None Interval Type 1~1500 1~1500 ls None recommend
None MP group
Abis MUX ed settings
UDP MUX are as
for A UDPMUX, UDPMUX, follows:
Transmissio Enumeration ABISMUX, ABISMUX, "Ring II Wait
n Type ATERMUX ATERMUX None None None
Time Before None
Switch" =
30; "Ring II
O&M of Try Rotating
BTS Interval Type 0~12 0~12 None 6 Duration 6 BTS
Time" = 60;
IP Fault 1~16(FG2
"Ring II
Detection a/GOUa),
Rotating
Based on 1~512(FG
Penalty
BFD Interval Type 1~512 2c/GOUc) None None None None
Time" = 0;
"T200" = 24;
"T203" = 3;
Ring and "N200"
Topology Interval Type 1~3 1~3 None 3 = 3. BTS
Radio Link
Manageme
nt Interval Type 5~254 5~254 None 5 5 Cell
Radio Link
Manageme
nt Interval Type 34~254 34~254 None 34 34 Cell
Radio Link
Manageme
nt Interval Type 29~254 29~254 None 29 29 Cell
Radio Link
Manageme Enumeration OFF(Off),
nt Type ON(On) OFF, ON None OFF OFF Cell
Radio Link
Manageme
nt Interval Type 5~254 5~254 None 5 5 Cell
Radio Link
Manageme
nt Interval Type 5~254 5~254 None 5 5 Cell
Radio Link
Manageme
nt Interval Type 23~254 23~254 None 23 23 Cell
Gb Over
FR Interval Type 1~255 1~255 None 6 6 BC
Gb Over
FR Interval Type 1~10 1~10 None 3 3 BC
Gb Over
FR Interval Type 1~10 1~10 None 4 4 BC
Network
Assisted
Cell
Change Enumeration NO(No),
(NACC) Type YES(Yes) NO, YES None NO None Cell
A Interface
Protocol 1~49
Process String Type None characters None None None None
A Interface
Protocol 1~49
Process String Type None characters None None None None
A Interface
Protocol 1~31
Process String Type None characters None None None None
A Interface
Protocol 1~31
Process String Type None characters None None None None
A Interface
Protocol 1~31
Process String Type None characters None None None None
1~31
IP QOS String Type None characters None None None None
1~49
A over IP String Type None characters None None None None
1~49
A over IP String Type None characters None None None None
1~31
A over IP String Type None characters None None None None
1~49
A over IP String Type None characters None None None None
1~31
A over IP String Type None characters None None None None
1~50
GPRS String Type None characters None None None BSC
Enhanced
Channel
Assignment Enumeration NO(No),
Algorithm Type YES(Yes) NO, YES None NO NO Cell
Power
Control Interval Type 0~15 0~15 None 2 2 Cell
DISABLE(Disab
AMR FR le),
AMR HR Enumeration ENABLE(Enabl DISABLE,
TFO Type e) ENABLE None DISABLE DISABLE Cell
Configurati
on
Manageme
nt Interval Type 0~5047 0~5047 None None None Cell
IBCA
(Interferenc
e Based
Channel 1~64
Allocation) String Type None characters None None None Cell
Configurati
on
Manageme
nt Interval Type 0~5047 0~5047 None None None Cell
IBCA
(Interferenc
e Based
Channel 1~64
Allocation) String Type None characters None None None Cell
Configurati
on
Manageme
nt Interval Type 0~5047 0~5047 None None None Cell
Configurati
on
Manageme 1~64
nt String Type None characters None None None Cell
Configurati
on
Manageme 5048~804
nt Interval Type 5048~8047 7 None None None Cell
Configurati
on
Manageme 1~64
nt String Type None characters None None None Cell
Compact
BTS
Automatic
Capacity Enumeration OFF(OFF),
Planning Type ON(ON) OFF, ON None None None Cell
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None None None Cell
Configurati
on
Manageme 1~65533,
nt Interval Type 1~65533,65535 65535 None None None Cell
Configurati
on
Manageme 1~3
Network-
nt String Type None characters None None None Cell
Controlled
Configurati
Cell
on
Reselection
Manageme 1~3
(NC2)
nt String Type None characters None None None Cell
Network
Assisted
Cell
Change Enumeration NO(No), SELECTI
(NACC) Type YES(Yes) NO, YES
ON0_PER None NO None
SELECTION Cell
Network-
Controlled NotSupport(Not M, 0_PERM-
Cell Support), SELECTI
NOTSUPP 1&SELECTI
Reselection Enumeration Support(Suppor ON1_PER
ORT, NOTSUPPO ON1_PERM
NOTSUPPO
(NC2) Type t) M,
SUPPORT None RT -RT BSC
Network- SELECTI 1&SELECTI
Controlled ON2_PER SELECTION ON2_PERM
Cell SELECTION0_ M, 0_PERM- -
Reselection Enumeration NO(No),
PERM, SELECTI 1&SELECTI 1&SELECTI
(NC2) Type YES(Yes)
SELECTION1_ NO, YES
ON3_PER None NO
ON1_PERM- None
ON3_PERM Cell
Configurati PERM, M, 1&SELECTI -
on SELECTION2_ SELECTI ON2_PERM- 1&SELECTI
Manageme PERM, ON4_PER 1&SELECTI ON4_PERM
nt Interval Type SELECTION3_
0~7 M,
0~7 None ON3_PERM-
None -None Cell
PERM, SELECTI 1&SELECTI 1&SELECTI
Configurati
SELECTION4_ ON5_PER ON4_PERM- ON5_PERM
on
PERM, M, 1&SELECTI -
Manageme
SELECTION5_ SELECTI ON5_PERM- 1&SELECTI
nt Interval Type 0~7 0~7 None None None Cell
Basic Cell PERM, ON6_PER 1&SELECTI ON6_PERM
Processing
Selection SELECTION6_ M, ON6_PERM- -
of
Basic Cell PERM, SELECTI 1&SELECTI 1&SELECTI
Measureme
Re- SELECTION7_ ON7_PER ON7_PERM- ON7_PERM
nt Report
selection Bit Field Type PERM M None 1 -1 Cell
Pre-
processing
of
Measureme
nt Report Interval Type 0~255 0~255 None 1 1 Cell
TCH:480~
9600,
step:480;
SDCCH:4
Fast Move 70~9400,
TCH:480~
Handover Interval Type 1~20 step:470 ms 4 4 Cell
14880,
HUAWEI I step:480;
Handover SDCCH:4
HUAWEI II 70~14570,
2G/3G
Handover Interval Type 1~31 step:470 ms 4 4 Cell
Neighborin
g Cell
Automatic
Optimizatio
2G/3G
n Interval Type 0~127 0~127 dB 0 0 BSC
Neighborin
g Cell
Automatic
Optimizatio
2G/3G
n Interval Type 0~127 0~127 dB 49 49 BSC
Neighborin
g Cell
Automatic
Optimizatio
2G/3G
n Interval Type 0~127 0~127 dB 55 55 BSC
Neighborin
g Cell
Automatic
Optimizatio
2G/3G
n Interval Type 0~127 0~127 dB 61 61 BSC
Neighborin
g Cell
Automatic
Optimizatio
2G/3G
n Interval Type 0~127 0~127 dB 64 64 BSC
Neighborin
g Cell
Automatic
Optimizatio
2G/3G
n Interval Type 0~127 0~127 dB 67 67 BSC
Neighborin
g Cell
Automatic
Optimizatio
2G/3G
n Interval Type 0~127 0~127 dB 73 73 BSC
Neighborin
g Cell
Public
Automatic
Voice
Optimizatio
Group Call
n Interval Type 0~127 0~127 dB 79 79 BSC
Service
Public
Public
Voice
Voice
Broadcast
Group Call
Service Interval Type 0~7 0~7 None 0 0 Cell
Service
Public
Voice
Broadcast
Service Interval Type 0~7 0~7 None 0 0 Cell
Networking NC0(NC0),
Control Enumeration NC1(NC1), NC0, NC1,
Mode Type NC2(NC2) NC2 None NC0 NC0 Cell
NO(NO_DIREC
A Interface T_CONNECT),
Protocol Enumeration YES(DIRECT_
Process Type CONNECT) NO, YES None YES YES SCCP
Configurati
on 0.0.0.0~25
Manageme IP Address 5.255.255.
nt Type None 255 None None None None
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~60 0~60 s 4 4 Cell
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None BSC6900
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None IP route
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None None
0.0.0.0~25
Abis IP IP Address 5.255.255.
over E1/T1 Type None 255 None None None BTS
INT(INT),
A Interface INTB(INTB), INT, INTB,
Protocol Enumeration NAT(NAT), NAT,
Process Type NATB(NATB) NATB None None None SCCP
NMOI(Network
Configurati
Operation
on
Mode I),
Manageme 1~62
NMOII(Network
nt String Type None characters None None None None
Operation
Network Mode II),
Operation NMOIII(Network NMOI,
Mode Enumeration Operation NMOII,
Support Type Mode III) NMOIII None NMOII NMOII Cell
O&M of
BTS Interval Type 0~255 0~255 None None None BTS
O&M of
BTS Interval Type 0~255 0~255 None None None BTS
O&M of
BTS Interval Type 0~255 0~255 None None None BTS
O&M of
BTS Interval Type 0~255 0~255 None None None BTS
Faulty
Manageme
nt Interval Type 40~45 40~45 V 43 None None
Faulty
Manageme
nt Interval Type 55~59 55~59 V 57 None None
Faulty
Manageme
nt Interval Type 40~45 40~45 V 43 None None
Faulty
Manageme
nt Interval Type 55~59 55~59 V 57 None None
Faulty
Manageme
nt Interval Type 40~45 40~45 V 43 None None
Faulty
Manageme
nt Interval Type 55~59 55~59 V 57 None None
Faulty
Manageme
nt Interval Type 40~45 40~45 V 43 None None
Faulty
Manageme
nt Interval Type 55~59 55~59 V 57 None None
Faulty
Manageme
nt Interval Type 40~45 40~45 V 43 None None
Faulty
Manageme
nt Interval Type 55~59 55~59 V 57 None None
Faulty
Manageme
nt Interval Type 40~45 40~45 V 43 None None
Faulty
Manageme
nt Interval Type 55~59 55~59 V 57 None None
HUAWEI II
Handover Interval Type 0~255 0~255 dB 2 2 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 30 30 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 1 1 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 95 95 Cell
HUAWEI II
Handover Interval Type 0~7 0~7 None 0 0 Cell
HUAWEI II
Handover Interval Type 0~100 0~100 per cent 85 85 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 14 14 Cell
HUAWEI II
Handover Interval Type 0~255 0~255 dB 103 103 Cell
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
HUAWEI II
ABIS(Abis
Handover Interval Type 0~7 0~7 None 2 2 Cell
Interface), A(A
Interface),
BSC(Ater
HUAWEI II
Interface on
Handover Interval Type 0~100 0~100 per cent 25 25 Cell
BSC), TC(Ater
Interface on
TC), ABIS, A,
Enumeration IUR_G(IUR_G BSC, TC, Adjacent
IP QOS Type Interface) IUR_G None None None node
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~64 0~64 None 8 8 Cell
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
HUAWEI I
Handover NODRX(NODR
HUAWEI II X),
Handover Interval Type 0~70
0.24sec(0.24se 0~70 None 50 50 Cell
c),
0.48sec(0.48se
O&M of c),
BTS Interval Type 0.72sec(0.72se
1~1000 1~1000 Ah 100 100 BTS
c),
HUAWEI III
0.96sec(0.96se NODRX,
Power OFF(Not
c), 0.24sec,
Control Enumeration Allowed),
1.20sec(1.20se 0.48sec,
Algorithm Type ON(Allowed) OFF, ON None ON ON Cell
c), 0.72sec,
1.44sec(1.44se 0.96sec,
Networking c), 1.20sec,
Control Enumeration 1.92sec(1.92se 1.44sec,
Mode Type c) 1.92sec s 0.24sec 0.24sec Cell
Faulty
Manageme 100~1000
nt Interval Type 100~10000 0 ms 2500 2500 BTS
Faulty
Manageme 100~1000
nt Interval Type 100~10000 0 ms 2500 2500 BTS
Network-
Controlled FORBID(Forbid
Cell ),
Reselection Enumeration PERMIT(Permit FORBID,
(NC2) Type ) PERMIT None PERMIT PERMIT Cell
Group Call
Reliability
Enhancing Interval Type 10~255 10~255 s 30 30 BTS
TCH:0~14
None Interval Type 1~10 1~10 None 3 3 None
Enhanced 880,
Measureme step:480;
nt SDCCH:0
Report(EM ~14570,
TCH:0~14
R) Interval Type 0~31 step:470 ms 2 2 Cell
Enhanced 880,
Measureme step:480;
nt SDCCH:0
Report(EM ~14570,
R) Interval Type 0~31 step:470 ms 6 6 Cell
MSC Pool Interval Type 0~1023 0~1023 None None None BSC
SGSN Pool Interval Type 0~1023 0~1023 None None None BSC
System
Information Enumeration NO(No),
Sending Type YES(Yes) NO, YES None YES YES BSC
Gb
Interface
Function Interval Type 0~65534 0~65534 None None None NSE
Gb
Interface
TCH:480~
Function Interval Type 0~65534 0~65534 None None None Cell
14880,
HUAWEI I step:480;
Handover SDCCH:4
HUAWEI II 70~14570,
Handover Interval Type 1~31 step:470 ms 2 2 Cell
North_latitude( North_latit
BSS-Based North latitude), ude,
LCS (Cell Enumeration South_latitude( South_latit
ID + TA) Type South latitude) ude None None None Cell
Gb Over
FR Interval Type 0~65534 0~65534 None None None NSVC
Gb Over
FR Interval Type 0~1023 0~1023 None None None NSVC
O&M of degree
BTS Interval Type 0~30 0~30 Celsius 9 9 BTS
O&M of degree
BTS Interval Type 0~30 0~30 Celsius 16 16 BTS
Public
Voice
Group Call
Service Interval Type 1~255 1~255 None 10 10 Cell
Ethernet
Abis IP
None Interval Type 0~100 0~100 per cent None None port
over E1/T1
A IP over
E1/T1
O&M of
Abis IP
BTS Interval Type 0~100 0~100 per cent 0 0 PPP link
over E1/T1
A IP over
E1/T1
O&M of
BTS Interval Type 0~100 0~100 per cent 0 0 MP group
IP QOS
O&M of IP logical
BTS Interval Type 0~100 0~100 per cent 0 0 port
O&M of
BTS
Link Ethernet
aggregation Interval Type 0~100 0~100 per cent 0 0 port
O&M of
BTS Interval Type 0~63 0~63 None None None Port queue
O&M of
BTS Interval Type 0~63 0~63 None None None BSC6900
O&M of Transport
BTS Interval Type 0~256 0~256 kbit/s 64 64 channel
O&M of Transport
BTS Interval Type 0~256 0~256 kbit/s 64 64 channel
O&M of
BTS Interval Type 0~7 0~7 None None None BSC6900
O&M of
BTS Interval Type 2~4094 2~4094 None None None BSC6900
Abis over
IP Interval Type 0~96 0~96 None 1 1 BTS
0.0.0.0~25
O&M of IP Address 5.255.255.
BTS Type None 255 None None None BSC6900
0.0.0.0~25
O&M of IP Address 5.255.255.
BTS Type None 255 None None None BSC6900
O&M of
BSC
Security
Manageme 1~32
Configurati
nt String Type None characters None None None BSC6900
on
Manageme
nt
RAN 1~167772
Sharing Interval Type 1~16777215 15 None None None BSC
O&M of 1~167772
BTS Interval Type 1~16777215 15 None None None Cell
A Interface
Circuit
Manageme
nt Interval Type 0~4 0~4 None None None E1/T1 link
PRIM(Primary
Operator),
RAN Enumeration SEC(Secondar PRIM,
Sharing Type y Operator) SEC None None None BSC
OPINDEX
0,
RAN
OPINDEX
Sharing Interval Type 0~3 0~3 None None None BSC
1,
OPINDEX0, OPINDEX
OPINDEX1, 2,
RAN OPINDEX2, OPINDEX
Sharing Bit Field Type OPINDEX3 3 None None None BSC
BYCICRANGE(
A Interface BY CIC BYCICRA
Circuit RANGE), NGE,
Manageme Enumeration BYCICVALUE( BYCICVAL
nt Type BY CIC VALUE) UE None None None E1/T1 link
BYTSRANGE(
Ater BY TS BYTSRAN
Interface RANGE), GE,
4:1 Enumeration BYTSVALUE(B BYTSVAL
Multiplexing Type Y TS VALUE) UE None None None E1/T1 link
BYTSRANGE(
A Interface BY TS BYTSRAN
Circuit RANGE), GE,
Manageme Enumeration BYTSVALUE(B BYTSVAL
nt Type Y TS VALUE) UE None None None E1/T1 link
BYCICRANGE(
BY CIC BYCICRA
RANGE), NGE,
O&M of Enumeration BYCICVALUE( BYCICVAL
BSC Type BY CIC VALUE) UE None None None PBCIC
SysOpt(System
optimization),
RAN 0~255
OSubcell(Overl
Sharing String Type None characters None None None BSC
aid subcell),
USubcell(Under SysOpt,
laid subcell), OSubcell,
Concentric Enumeration NoPrefer(No USubcell,
Cell Type preference) NoPrefer None SysOpt SysOpt Cell
Concentric
Cell Interval Type 0~63 0~63 dB 35 35 Cell
L0(Level0),
L1(Level1),
Concentric
L2(Level2),
Cell Interval Type 0~255 0~255 bit 63 63 Cell
L3(Level3),
Enhanced L4(Level4),
Channel L5(Level5), L0, L1, L2,
Assignment Enumeration L6(Level6), L3, L4, L5,
Algorithm Type L7(Level7) L6, L7 None L0 L0 TRX
MANUAL(MAN
Enumeration SDH,
UAL),
None Type SDH, SONET SONET None None None Board
FORCED(FOR
CED), MANUAL,
CLEARALARM FORCED,
O&M of Enumeration A(CLEARALAR CLEARAL
BTS Type MA) ARMA None None None None
FORBID(Forbid
),
O&M of Enumeration RESTORE(Res FORBID,
BTS Type tore) RESTORE None None None BTS
MBSC
Load
IP-Based
Balancing Interval Type 0~4 0~4 None None None BSC
2G/3G Co-
Transmissio
n on Base
Station
Side Interval Type 0~7 0~7 None None None BTS
One_touch(exe
BSC/RNC cute on all One_touch
Software boards in all ,
Manageme Enumeration subracks), Step_by_S Step_by_Ste Step_by_St
nt Type Step_by_Step tep None p ep None
Frequency 1~200
Band String Type None characters None None None Cell
Concentric
Cell Interval Type 0~63 0~63 dB 20 20 Cell
Enhanced
Dual-Band Enumeration NO(No),
Network Type YES(Yes) NO, YES None YES YES Cell
HUAWEI I
Handover
HUAWEI II 500~6000
Handover Interval Type 500~60000 0 ms 10000 10000 Cell
HUAWEI I
Handover
HUAWEI II 500~6000
Handover Interval Type 500~60000 0 ms 10000 10000 Cell
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
Enhanced
Dual-Band
Network Interval Type 0~100 0~100 per cent 80 80 Cell
Enhanced
Channel
Assignment
Algorithm Interval Type 0~50 0~50 W 15 15 TRX
Enhanced
Dual-Band
Network Interval Type 0~63 0~63 dB 25 25 Cell
TS0, TS1,
TS2, TS3,
Enhanced TS4, TS5,
Dual-Band Enumeration NO(No), TS6, TS7,
Network Type YES(Yes) NO,
TS8,YES
TS9, None YES YES Cell
TS10,
Enhanced TS11,
Dual-Band TS12,
Network Interval Type 1~255 TS13,
1~255 s 1 1 Cell
TS14,
TS15,
Enhanced TS16,
Dual-Band TS0, TS1, TS2, TS17,
Network Interval Type 1~255
TS3, TS4, TS5, 1~255
TS18, s 5 5 Cell
TS6, TS7, TS8, TS19,
Enhanced TS9, TS10, TS20,
Dual-Band TS11, TS12, TS21,
Network Interval Type TS13,
0~63 TS14, TS22,
0~63 dB 5 5 Cell
TS15, TS16, TS23,
TS17, TS18, TS24,
Enhanced
TS19, TS20, TS25,
Dual-Band
TS21, TS22, TS26,
Network Interval Type 0~100 0~100 per cent 50 50 Cell
TS23, TS24, TS27,
TS25, TS26, TS28,
Semi- TS27, TS28, TS29,
Permanent TS29, TS30, TS30,
Connection Bit Field Type TS31 TS31 None None None BSC
Semi-
Permanent
Connection Interval Type 0~335 0~335 None None None BSC
O&M of
BSC Interval Type 0~15 0~15 None None None BTS
O&M of
BSC Interval Type 0~31 0~31 None None None BTS
Multi-site 1.0~200.0
Cell Interval Type 10~2000 (step: 0.1) W None None BTS
Multi-site 30.0~53.0
Cell Interval Type 300~530 (step: 0.1) dB None None BTS
Enhanced
Dual-Band
Network Interval Type 0~100 0~100 per cent 90 90 Cell
Semi-
Permanent
Connection Interval Type 0~27 0~27 None None None BSC
O&M of
BSC Interval Type 0~27 0~27 None None None BSC
Semi-
Permanent
Connection Interval Type 0~11 0~11 None None None BSC
MBSC
Load Enumeration NO(No),
Balancing Type YES(Yes) NO, YES None NO NO Cell
GSM/WCD
MA Service
Based Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO BSC
GSM/WCD
MA Service
Based Enumeration CLOSE(Close), CLOSE,
Handover Type OPEN(Open) OPEN None CLOSE CLOSE BSC
MBSC
Load
Balancing Interval Type 1~60 1~60 s 15 15 BSC
Semi-
Permanent
Connection Interval Type 0~255 0~255 None None None BSC
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 320 320 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 320 320 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 185 185 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 280 280 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 280 280 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 155 155 BTS
Faulty
Manageme 100~1000
nt Interval Type 100~10000 0 ms 1500 1500 BTS
Faulty
Manageme 100~1000
nt Interval Type 100~10000 0 ms 1500 1500 BTS
Radio
Common
Channel
Manageme
nt Interval Type 1~255 1~255 s 15 15 Cell
GSM Flow
Control Interval Type 50~95 50~95 per cent 90 90 BSC
GSM Flow
Control Interval Type 50~95 50~95 per cent 85 85 BSC
GSM Flow
Control Interval Type 50~95 50~95 per cent 80 80 BSC
GSM Flow
Control Interval Type 50~95 50~95 per cent 75 75 BSC
Multi-
Carrier
Intelligent
Voltage Enumeration NO(NO),
Regulation Type YES(YES) NO, YES None NO NO BTS
Packet
Assignment NO(Not
Taken Over Enumeration Support),
by the BTS Type YES(Support) NO, YES None NO NO Cell
GSM Flow
Control Interval Type 10~65535 10~65535 None 180 180 Cell
Paging Interval Type 0~255 0~255 ms 255 255 Cell
GSM Flow
Control Interval Type 10~65535 10~65535 None 220 220 Cell
Pan_0(0), Pan_0,
Pan_1(1), Pan_1,
Pan_2(2), Pan_2,
Pan_3(3), Pan_3,
Paging Interval Type 1~8 1~8 None 4 4 Cell
Pan_4(4), Pan_4,
Pan_0(0), Pan_0,
Pan_5(5), Pan_5,
Pan_1(1), Pan_1,
Pan_6(6), Pan_6,
Pan_2(2), Pan_2,
Enumeration Pan_7(7), Pan_7,
Pan_3(3), Pan_3,
GPRS Type 255(not use) 255 None Pan_1 Pan_1 Cell
Pan_4(4), Pan_4,
Pan_4(4), Pan_4,
Pan_5(5), Pan_5,
Pan_8(8), Pan_8,
Pan_6(6), Pan_6,
Pan_12(12), Pan_12,
Enumeration Pan_7(7), Pan_7,
Pan_16(16), Pan_16,
GPRS Type 255(not use) 255 None Pan_2 Pan_2 Cell
Pan_20(20), Pan_20,
Pan_24(24), Pan_24,
L0(Level0),
Pan_28(28), Pan_28,
L1(Level1),
Enumeration Pan_32(32), Pan_32,
L2(Level2),
GPRS Type 255(not use) 255 None Pan_20 Pan_20 Cell
L3(Level3),
TRX Power L4(Level4),
Amplifier L5(Level5), L0, L1, L2,
Intelligent Enumeration L6(Level6), L3, L4, L5,
Shutdown Type L7(Level7) L6, L7 None L0 L0 TRX
O&M of
BTS Interval Type 0~9999 0~9999 None None None BTS
O&M of
BTS Interval Type 0~99 0~99 None None None BTS
ENABLED(Ena ENABLED
bled), ,
Enumeration DISABLED(Dis DISABLE
IP QOS Type abled) D None DISABLED DISABLED IP path
HUAWEI I 0.5~16,
Handover Interval Type 1~32 step:0.5 s 6 6 Cell
TCH:480~
GPRS Interval Type 0~65535 0~65535 None 2 2 BSC
7200,
Enhanced step:480;
Power SDCCH:4
Control 70~7050,
Algorithm Interval Type 1~15 step:470 ms 3 3 Cell
O&M of
BSC Interval Type 0~31 0~31 None None None PBE1T1
PDCH
Dynamic
Adjustment Interval Type 10~160 10~160 None 80 80 Cell
Power
Optimizatio
n Based on
Channel Enumeration NO(No),
Type Type YES(Yes) NO, YES None NO NO Cell
PDCH
Dynamic Enumeration NO(NO),
Adjustment Type YES(YES) NO, YES None NO NO Cell
PDCH
Dynamic
Adjustment Interval Type 10~70 10~70 None 70 70 Cell
BSC Node
Redundanc
y Interval Type 0~65534 0~65534 None None None BSC
Abis over
IP Interval Type 0~65534 0~65534 None None None BTS
0.0.0.0~25
Abis over IP Address 5.255.255.
IP Type None 255 None None None BTS
0.0.0.0~25
Abis over IP Address 5.255.255.
IP Type None 255 None None None BTS
Abis over
IP Interval Type 0~2047 0~2047 None None None BTS
Abis IP
over E1/T1 0.0.0.0~25
A IP over IP Address 5.255.255.
E1/T1 Type None 255 None None None BSC6900
Abis IP
over E1/T1 0.0.0.0~25
A IP over IP Address 5.255.255.
E1/T1 Type None 255 None None None MP group
IP Fault
Detection 0.0.0.0~25
Based on IP Address 5.255.255.
BFD Type None 255 None None None None
0.0.0.0~25
Abis IP IP Address 5.255.255.
over E1/T1 Type None 255 None None None BTS
0.0.0.0~25
Abis IP IP Address 5.255.255.
over E1/T1 Type None 255 None None None BTS
0.0.0.0~25
IP Address 5.255.255.
A over IP Type None 255 None None None SCTP link
0.0.0.0~25
IP Address 5.255.255.
A over IP Type None 255 None None None SCTP link
0.0.0.0~25
IP Address 5.255.255.
IP QOS Type None 255 None None None IP path
0.0.0.0~25
IP Address 5.255.255. 255.255.255. 255.255.255
IP QOS Type None 255 None 255 .255 IP path
1024~655
A over IP Interval Type 1024~65535 35 None None None SCTP link
O&M of 1~63
BTS String Type None characters None None None None
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None YES YES Cell
Network-
Controlled
Cell
Reselection
(NC2) Interval Type 0~255 0~255 s 10 10 Cell
Network-
Controlled
Cell
Reselection
(NC2) Interval Type 0~63 0~63 None 30 30 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~255 0~255 s 255 255 Cell
2G/3G
IP QOS Interval Type 1~60 1~60 s 5 5 IP path
Neighborin
g Cell
Automatic
Optimizatio 15~720,
n Interval Type 1~48 step:15 min None 5 BSC
Abis IP
over E1/T1 Disable(Disable
A IP over Enumeration ), Disable,
E1/T1 Type Enable(Enable) Enable None Enable Enable PPP link
Abis IP
over E1/T1 Disable(Disable
A IP over Enumeration ), Disable,
E1/T1 Type Enable(Enable) Enable None Enable Enable MP link
NO(No
Streaming Enumeration Support),
QoS(GBR) Type YES(Support) NO, YES None NO NO NSE
GSM Flow
Control Interval Type 0~2
BE(BE), 0~2 None 2 2 BSC
AF11(AF11),
AF12(AF12), BE, AF11,
GSM Flow AF13(AF13), AF12,
Control Interval Type AF21(AF21),
10~1000 AF13,
10~1000 None 660 660 BSC
AF22(AF22), AF21,
AF23(AF23), AF22,
BE, AF11,
AF31(AF31), AF23,
GSM Flow AF12,
100~6000
AF32(AF32), AF31,
Control Interval Type 100~600000 AF13,
00 ms 1000 1000 BSC
AF33(AF33), AF32,
AF21,
AF41(AF41), AF33,
AF22,
AF42(AF42), AF41,
BE, AF11, AF23,
Enumeration AF43(AF43), AF42,
AF12, AF13, AF31,
IP QOS Type EF(EF) AF43, EF None None None Board
Abis MUX AF21, AF22, AF32,
UDP MUX AF23, AF31, AF33,
for A AF32, AF33, AF41,
Transmissio AF41, AF42, AF42, ,
n Bit Field Type AF43, EF AF43, EF None None None IP Path
Basic Cell
Re- Enumeration NO(No),
selection Type YES(Yes) NO, YES None YES YES Cell
DISABLE(Disab
Security led),
Manageme Enumeration ENABLE(Enabl DISABLE,
nt Type ed) ENABLE None None None BSC6900
Ethernet
OAM Interval Type 5~64 5~64 None 10 10 BSC6900
Ethernet
OAM Interval Type 64~1024 64~1024 byte 128 128 BSC6900
Abis MUX Interval Type 24~1031 24~1031 byte 1031 1031 BTS
0~10,
EGPRS Interval Type 0~50 step:0.2 dB 0 0 TRX
100~1000
0, IP logical
IP QOS Interval Type 1~100 step:100 ms 10 10 port
0~1, IP logical
IP QOS Interval Type 0~1000 step:0.001 None 30 30 port
A(A Interface),
O&M of Enumeration ABIS(Abis
BSC Type Interface) A, ABIS None None None Board
O&M of Enumeration OFF(Off),
BSC Type ON(On) OFF, ON None None None Board
O&M of
BSC Interval Type 0~600 0~600 s None None Board
Flow
Control Interval Type 30~100 30~100 per cent 60 60 Board
Flow
Control Interval Type 30~100 30~100 per cent 60 67 Board
50~400,
Paging Interval Type 1~8 step: 50 ms 2 2 Cell
CLOSE(Forced
Paging Interval Type 2~15 2~15 None 5 5 Cell
turn-off),
OPEN(Forced
turn-on), CLOSE,
Enumeration AUTO(Self- OPEN,
Paging Type adaptive) AUTO None OPEN OPEN Cell
Flow
Control Interval Type 30~100 30~100 per cent 50 50 Board
Flow
Control Interval Type 30~100 30~100 per cent 50 62 Board
Flow Enumeration
Control Type ON, OFF ON, OFF None ON ON Board
Configurati
on
Manageme
nt Interval Type 0~11 0~11 None None None None
Faulty
Manageme
nt Interval Type 1~32 1~32 None None None None
Configurati
on
Manageme
nt Interval Type 0~3 0~3 None None None None
Ater
Interface
4:1
Multiplexing Interval Type 0~335 0~335 None None None E1/T1 link
A Interface
Circuit
Manageme
nt Interval Type 0~335 0~335 None None None E1/T1 link
None Interval Type 0~335 0~335 None None None E1/T1 link
O&M of
BSC Interval Type 0~335 0~335 None None None PBE1T1
Faulty
Manageme
nt Interval Type 0~335 0~31(PEU
0~335 None None None BSC6900
a/EIUa),
0~62(E1 of
OIUa),
0~83(T1 of
None Interval Type 0~7 0~31(PEU
0~7 None None None Board
OIUa),
a/EIUa),
0~251(E1
0~62(E1 of
of POUc),
OIUa),
0~335(T1
0~83(T1 of
None Interval Type 0~335 0~31(PEU
of POUc) None None None E1/T1 port
OIUa),
a/EIUa),
0~251(E1
0~62(E1 of
of POUc),
OIUa),
0~335(T1
0~83(T1 of
None Interval Type 0~335 of POUc) None None None None
OIUa),
0~251(E1
of POUc),
0~335(T1
None Interval Type 0~335 of POUc) None None None None
Loopback
None Interval Type 0~7 0~7 None None None optical port
Board
Switchover Interval Type 0~11 0~11 None None None BSC6900
0(OIUa),
0~3(POUc
None Interval Type 0~7 ) None None None Board
0~7(FG2a)
Channeliz
,
ed optical
0~1(GOUa
None Interval Type 0~7 0~7 None None None port
),
0~11(FG2
c),
0~3(GOUc Ethernet
None Interval Type 0~11 ) None None None port
0~7(FG2a)
,
IP logical
0~1(GOUa
None Interval Type 0~11 0~11 None None None port
),
IP Fault 0~11(FG2
Detection c),
Based on 0~3(GOUc
BFD Interval Type 0~11 ) None None None None
None Interval Type 0~335 0~335 None None None E1/T1 port
None Interval Type 0~31 0~31 None None None E1/T1 port
Gb Over
FR Interval Type 0~335 0~335 None None None E1/T1 port
O&M of
BSC Interval Type 0~335 0~335 None None None PBSL
O&M of
BTS Interval Type 0~355 0~355 None None None BTS
Faulty
Manageme
nt Interval Type 0~255 0~255 None None None BTS
O&M of
BTS Interval Type 0~23 0~23 None None None PPP link
O&M of
BTS Interval Type 0~23 0~23 None None None BTS
O&M of
BTS Interval Type 0~335 0~335 None None None BTS
O&M of
BTS Interval Type 0~1 0~1 None None None BTS
O&M of
BTS Interval Type 0~1 0~1 None None None BTS
PoC QoS Interval Type 250~650 250~650 None 650 650 Cell
O&M of
BTS Interval Type 0~9 0~9 None 2 2 Cell
O&M of
BTS Interval Type 0~9 0~9 None 2 2 Cell
Configurati
on
Manageme 0~250
nt String Type None characters None None None BSC6900
Configurati
on
Manageme 1~250
nt String Type None characters None None None BSC6900
O&M of
BSC Interval Type 21~65535 21~65535 None None None BSC6900
Ring
Topology Interval Type 0~1 0~1 None None None BTS
OML
Backup Interval Type 0~1 0~1 None None None BTS
O&M of
BSC Interval Type 0~15 0~15 None None None BTS
O&M of
BSC Interval Type 1~16 1~16 None 16 16 BTS
Enumeration
None Type IP, HDLC IP, HDLC None None None BSC6900
Configurati
on
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None None None None
TOPEXTOUTP
ORT(TOP
Ethernet Enumeration ETHER, ETHER, Ethernet
IP-Based Extended Out
OAM Type TRUNK TRUNK None None None port
2G/3G Co- Port),
Transmissio TOPEXTINPOR TOPEXTO
n on Base T(TOP UTPORT,
Station Enumeration Extended In TOPEXTI
Side Type Port) NPORT None None None BTS
2G/3G Cell BCCHNorm(BC
Reselection CHNorm), BCCHNor
Based on Enumeration BCCHExt(BCC m,
MS State Type HExt) BCCHExt None BCCHNorm BCCHNorm Cell
BYBTSTYPE(B
y BTS Type), BYBTSTY
O&M of Enumeration BYBTS(By PE,
BTS Type BTS) BYBTS None None None None
O&M of 0.1~100.0
BTS Interval Type 1~1000 (step: 0.1) kVA 125 125 BTS
Configurati
on
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None CLOSE None None
Configurati
on
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None CLOSE None None
Configurati
on
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None CLOSE None None
Configurati
on
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None CLOSE None None
Configurati
on
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None CLOSE None None
Configurati
on
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None CLOSE None None
O&M of
BTS Interval Type 0~1000 0~1000 None 100 100 BTS
Downlink 0~10,
EGPRS2-A Interval Type 0~50 step: 0.2 dB 0 0 Cell
Downlink 0~10,
POWER_48_24
EGPRS2-A Interval Type 0~50 step: 0.2 dB 0 0 Cell
(48/24 Power
Module), POWER_4
POWER_240_2 8_24,
O&M of Enumeration 4(240/24 Power POWER_2 POWER_48_ POWER_48
BTS Type Module) 40_24 None 24 _24 BTS
220VAC(220V
AC), N48VDC(-
48V DC), 220VAC,
O&M of Enumeration P24VDC(+24V N48VDC,
BTS Type DC) P24VDC None 220VAC 220VAC BTS
Configurati
on
Manageme
nt Interval Type 0~13 0~13 None 0 0 TRX
4_5W(4.5W), 9_5W, 9W,
4W(4W), 8_5W, 8W,
3_7W(3.7W), 7_5W, 7W,
3_1W(3.1W), 6_5W, 6W,
3W(3W), 5_5W, 5W,
2_5W(2.5W), 4_5W, 4W,
2W(2W), 3_7W,
Configurati 200mW(200m 3_1W, 3W,
on W), 2_5W, 2W,
Manageme Enumeration DEFAULT(Defa 200mW,
nt Type ult) DEFAULT None DEFAULT None TRX
Abis IP Ethernet
over E1/T1 Interval Type 0~100 0~100 per cent 10 10 port
Abis IP Ethernet
over E1/T1 Interval Type 0~100 0~100 per cent 5 5 port
Abis IP
over E1/T1
A IP over
E1/T1 Interval Type 0~499 0~499 None None None PPP link
Abis IP
over E1/T1
A IP over
E1/T1 Interval Type 0~499 0~499 None None None MP link
IP logical
None Interval Type 0~499 0~499 None None None port
Abis IP
over E1/T1 Interval Type 0~15 0~15 None None None PPP link
Abis IP
over E1/T1 Disable(Disable
A IP over Enumeration ), Disable,
E1/T1 Type Enable(Enable) Enable None Disable Disable MP group
Enhanced
None Interval Type 0~5 0~5 None 2 2 BSC6900
Multi Level
Precedence
and
Preemption Enumeration NO(No),
Enhanced
(EMLPP) Type YES(Yes) YES, NO None NO NO BSC
Multi Level
Precedence NOT_ALLOWE ALLOWED
and D(Not Allowed), ,
Preemption Enumeration ALLOWED(Allo NOT_ALL NOT_ALLO NOT_ALLO
(EMLPP) Type wed) OWED None WED WED BSC
Emergency
Call Service Enumeration OFF(Off),
(TS12) Type ON(On) OFF, ON None OFF OFF Cell
Pre-
processing
of
Measureme 0(No packet
nt Report Interval Type access),
1~255 1~255 None 1 1 BSC
3(Packet
access of level
1), 4(Packet
Abis over
access of levels
IP Interval Type 0~255 0~255 None 60 60 BTS
1-2), 5(Packet
access of levels
1-3), 6(Packet
Enumeration access of level 0, 3, 4, 5,
GPRS Type 1-4) 6 None 6 6 Cell
A Interface
Protocol
Process Interval Type 0~99 0~99 None 0 0 SCCP
A Interface
Protocol
Process TDME1_O(TD
Interval Type 0~99 0~99 None 0 0 None
M E1 0 Port),
TDME1_1(TDM
E1 1 Port),
Enumeration HIGH,
FE_E(FE TDME1_O
None Type HIGH, LOW LOW None None None IP route
Electric Port), ,
FE_O(FE TDME1_1,
Optical Port), FE_E,
Abis over Enumeration IPOE(IP over FE_O,
IP Type TDME1_O(TD
E1) IPOE None None None BTS
M E1 0 Port),
TDME1_1(TDM
E1 1 Port),
Abis over Enumeration
FE_E(FE TDME1_O
IP Type 1(1), 2(2) 1, 2 None None None BTS
Electric Port), ,
FE_O(FE TDME1_1,
Optical Port), FE_E,
Abis over Enumeration IPOE(IP over FE_O,
IP Type E1) IPOE None None None BTS
Security
DEFAULT(Defa
Manageme 0~200
ult Sequence),
nt String Type None characters None None None BSC6900
CUSTOMIZDE(
Customized DEFAULT,
Sequence), CUSTOMI
Abis over Enumeration DISABLE(DISA ZDE,
IP Type BLE) DISABLE None None None BTS
A Interface ITUT(ITUT),
Protocol Enumeration ANSI(ANSI), ITUT,
Process Type TTC(TTC) ANSI, TTC None ITUT ITUT SCCP
Dynamic
Cell Power
Off Interval Type 0~255 0~255 min 5 5 Cell
TRX Power
Amplifier
Intelligent
Shutdown Interval Type 60~3600 60~3600 s 300 300 BSC
ALL(Select all
ports),
Enumeration SINGLE(Select ALL,
None Type one port) SINGLE None None ALL E1/T1 port
ALL(Select all
ALL(Select all
E1/T1 ports),
ports),
PORT(Select all
Enumeration SINGLE(Select ALL,
E1/T1 ports of
None Type one port) SINGLE None None None Board
one
channelized
optical port), ALL, Channeliz
Enumeration SINGLE(Select PORT, ed optical
None Type one E1/T1 port) SINGLE None None ALL port
IP QOS Interval Type 0~100 0~100 per cent 100 100 BSC6900
BE, AF11,
AF12,
IP QOS Interval Type 0~100 AF13,
0~100 per cent 100 100 BSC6900
AF21,
AF22,
NO(No
BE, AF11, AF23,
PS Enumeration Support),
AF12, AF13, AF31, When the
Handover Type YES(Support) NO, YES None NO NO NSE
AF21, AF22, AF32, interface
When the
AF23, AF31, AF33, type is Abis,
interface
AF32, AF33, AF41, the
type is Abis
Enumeration AF41, AF42, AF42, parameter is
and
None Type AF43, EF AF43, EF None None AF43. BSC6900
transmission
type is
HDLC, the
parameter is
None Interval Type 0~7 0~7 None None 1. BSC6900
GSM Flow
Control Interval Type 0~7 0~7 None 4 4 Cell
Packet BE, AF11,
System AF12,
Information Interval Type 1~16 AF13,
1~16 None 6 6 Cell
AF21,
AF22, When the
Packet
BE, AF11, AF23, interface
System Enumeration NO(No),
AF12, AF13, AF31, type is Abis,
Information Type YES(Yes) NO, YES None NO NO Cell
AF21, AF22, AF32, transmission
When the
AF23, AF31, AF33, type is IP,
interface
AF32, AF33, AF41, the
type is Abis
Enumeration AF41, AF42, AF42, parameter is
and
IP QOS Type AF43, EF AF43, EF None None AF33. BSC6900
transmission
type is
HDLC, the
parameter is
IP QOS Interval Type 0~7 0~7 None None 2. BSC6900
GSM Flow
Control Interval Type 0~7 0~7 None 6 6 Cell
Concentric
Cell Interval Type 0~63 0~63 None 25 25 Cell
Radio
Common
Channel
Manageme
nt Interval Type -121~-104 -121~-104 dBm -109 -109 Cell
Multi-site
Cell Interval Type -121~-104 -121~-104 dBm -109 -109 BTS
GSM Flow
Control Interval Type 10~10000 10~10000 None 500 500 BSC
Concentric
Cell Interval Type 0~63 0~63 None 35 35 Cell
Enumeration ON(ON),
None Type OFF(OFF) ON, OFF None None None BSC6900
Faulty
Manageme Enumeration BOOL(BOOL), BOOL,
nt Type VALUE(VALUE) VALUE None None None None
O&M of 123~6553
BSC Interval Type 123~65534 4 None None None BSC6900
Basic Cell
Re-
selection Interval Type 0~31 0~31 s 0 0 Cell
GB_OVER_FR( GB_OVER
Gb Gb over FR),
E1_DOUBLE_F _FR,
Interface Enumeration GB_OVER_IP(
RAME(E1_DO GB_OVER
Function Type Gb over IP)
UBLE_FRAME) _IP None None None NSE
, E1_DOUB
Faulty E1_CRC4_MUL LE_FRAM
E1_DOUBLE_F
Manageme Enumeration TI_FRAME(E1_
BOOL(BOOL),
RAME(E1_DO
E,
BOOL,
nt Type CRC4_MULTI_
VALUE(VALUE) E1_CRC4
VALUE None BOOL BOOL BTS
UBLE_FRAME)
B8ZS(B8ZS),
FRAME), _MULTI_F
,HDB3(HDB3), E1_DOUB
B8ZS,
T1_SUPER_FR RAME,
E1_CRC4_MUL
AMI(AMI), LE_FRAM
HDB3,
E1_DOUBLE_F
AME(T1_SUPE T1_SUPE
Enumeration TI_FRAME(E1_
AMI_ZCS(AMI_
RAME(E1_DO
E,
AMI,
R_FRAME), R_FRAME
None Type CRC4_MULTI_
ZCS) E1_CRC4
AMI_ZCS None None None E1/T1 port
UBLE_FRAME)
T1_EXTENDE ,
FRAME), _MULTI_F
,D_SUPER_FR E1_DOUB
T1_EXTE
T1_SUPER_FR RAME,
E1_CRC4_MUL
AME(T1_EXTE LE_FRAM
NDED_SU
AME(T1_SUPE T1_SUPE
Enumeration TI_FRAME(E1_
NDED_SUPER E,
PER_FRA
R_FRAME), R_FRAME
None Type CRC4_MULTI_
_FRAME) E1_CRC4
ME None None None E1/T1 port
T1_EXTENDE ,
FRAME), _MULTI_F
D_SUPER_FR T1_EXTE
T1_SUPER_FR RAME,
AME(T1_EXTE NDED_SU
AME(T1_SUPE T1_SUPE
Enumeration NDED_SUPER PER_FRA
R_FRAME), R_FRAME
None Type _FRAME) ME None None None E1/T1 port
T1_EXTENDE
APM100(APM1 ,
D_SUPER_FR
00), T1_EXTE
AME(T1_EXTE
APM200(APM2 NDED_SU E1_CRC4_
Enumeration NDED_SUPER
00), PER_FRA MULTI_FRA
None Type _FRAME)
APM30(APM30 ME None None ME E1/T1 port
Abis
Transmissio ),
n PS4890(PS489
Optimizatio 0),
n Interval Type EPS4815(EPS4
0~15 0~15 None None None BTS
815),
SC48200~5||
(SC48200)$$ APM100,
Enumeration Ethernet
(SC48200)** APM200,
None Type FE, GE FE, GE None None None port
CUSTOM(SC48 APM30,
200)** PS4890,
CUSTOM~100|| EPS4815,
O&M of Enumeration ()$$ SC48200,
BTS Type (CUSTOM) CUSTOM None None None BTS
Security
Manageme 0~200
nt String Type None characters None None None BSC6900
O&M of 1~50
BTS String Type None characters None None None BTS
O&M of 1~50
BTS String Type None characters None None None None
Gb Over
FR Interval Type 1~65535 1~65535 ms 500 500 BSC
Security
Manageme Password 0~64
nt Type None characters None None None BSC6900
O&M of
BSC
Security
Manageme Password 1~32
nt Type None characters None None None BSC6900
BIT0,
BIT1,
O&M of Password 1~32
BIT6,
BTS Type None characters
BIT7, None None None None
BIT8,
Security BIT9,
Manageme BIT14,
6~32
nt Interval Type 6~32 BIT15,
characters None None None BSC6900
BIT0, BIT1, BIT16,
BIT0,
BIT6, BIT7, BIT17,
BIT1,
BIT8, BIT9, BIT22,
O&M of BIT2,
BIT14, BIT15, BIT23,
BTS Interval Type 0~31 BIT3,
0~31 None None None None
BIT16, BIT17, BIT24,
BIT4,
BIT22, BIT23, BIT25,
BIT5,
Faulty BIT24, BIT25, BIT29,
BIT0, BIT1, BI16,
Manageme BIT29, BIT30, BIT30,
BIT2, BIT3, BIT7,
nt Bit Field Type BIT31 BIT31 None None None None
BIT4, BIT5, BIT8,
BIT6, BIT7, BIT9,
Faulty BIT8, BIT9, BIT10,
Manageme BIT10, BIT11, BIT11,
nt Bit Field Type BIT12 BIT12 None None None None
Active
Power Enumeration NO(No),
Control Type YES(Yes) NO, YES None NO NO Cell
HUAWEI III
Power
Control Enumeration NO(No),
Algorithm Type YES(Yes) NO, YES None NO NO Cell
Enhanced PWR2(Power
Power control II),
Control Enumeration PWR3(Power PWR2,
Algorithm Type controlIII) PWR3 None PWR3 PWR3 Cell
Radio
Common
Channel
Manageme
nt Interval Type 0~3 0~3 None 1 1 Cell
Radio
Common
OnlyCurPwrLoc
Channel
(Only Current
Manageme Enumeration NO(No),
Working
nt Type YES(Yes) NO, YES None YES YES Cell
Location TRXes
be Turned On), OnlyCurP
ALLPwrLoc(All wrLoc,
Multi-site Enumeration Location TRXes ALLPwrLo
CLASS0(Class
Cell Type be Turned On) c None ALLPwrLoc ALLPwrLoc Cell
0),
CLASS1(Class
1), CLASS0,
O&M of Enumeration CLASS2(Class CLASS1,
BTS Type 2) CLASS2 None None None BTS
Active
Backup
Power DB0(0.0dB),
Control DB2(-0.2dB),
Interval Type 0~720 0~720 min 5 5 BTS
DB4(-0.4dB), DB0, DB2,
Enhanced
DB6(-0.6dB), DB4, DB6,
Channel
DB8(-0.8dB), DB8,
Assignment Enumeration NO(No),
DB10(-1.0dB), DB10,
Algorithm Type YES(Yes) NO, YES None YES YES Cell
DB12(-1.2dB), DB12,
Configurati DB14(-1.4dB), DB14,
on DB16(-1.6dB), DB16,
Manageme Enumeration DB18(-1.8dB), DB18,
nt Type Default(Default) Default None Default Default TRX
None Interval Type 0~63 0~63 None None None Port queue
None Interval Type 0~63 0~63 None None None Port queue
None Interval Type 0~63 0~63 None None None Port queue
None Interval Type 0~63 0~63 None None None Port queue
GSM/WCD
MA
Interoperabi
None Interval Type 0~63 0~63 None None None Port queue
lity
GSM/TD- Use_Qsearch_I
SCDMA (Use Use_Qsea
Set this
Interoperabi Enumeration Qsearch_I), rch_I, Use_Qsearc Use_Qsearc
parameter to
lity Type Always(Always) Always None h_I h_I Cell
YES only in
HUAWEI I special
Handover scenarios
HUAWEI II Enumeration NO(No), such as
Handover Type YES(Yes) NO, YES None NO highways. Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 1~10 1~10 None 3 3 Cell
HUAWEI I
Handover -98, -94,
HUAWEI II -90, -86,
Handover Interval Type 0~255 -82,
0~255 -78, s 15 15 Cell
-74,
HUAWEI I
GSM/WCD (always),
Handover
MA -78, -74,
HUAWEI II
Interoperabi -70, -66,
Handover Interval Type 1~10 1~10 None 2 2 Cell
lity -62, -58,
GSM/TD- -54,
SCDMA Positive
Interoperabi infinity(nev
TCH:480~
lity Interval Type 0~15 er) None 15 15 Cell
15360,
HUAWEI I step:480;
Handover SDCCH:4
HUAWEI II 70~15040,
TCH:480~
Handover Interval Type 1~32 step:470 ms 6 6 Cell
15360,
HUAWEI I step:480;
Handover SDCCH:4
HUAWEI II 70~15040,
Handover Interval Type 1~32 step:470 ms 2 2 Cell
NO(Not
QoS Enumeration Support),
ARP&THP Type YES(Support) NO, YES None NO NO Cell
-90, -86,
-82, -78,
-74,
GSM/WCD (always),
-98, -94,
MA -78, -74,
-90, -86,
Interoperabi -70, -66,
-82, -78,
lity -62, -58,
-74,
GSM/TD- -54,
GSM/WCD (always),
SCDMA Positive
MA -78, -74,
Interoperabi infinity(nev
Interoperabi -70, -66,
lity Interval Type 0~15 er) None 15 15 Cell
lity -62, -58,
GSM/TD- -54,
SCDMA Positive
Interoperabi infinity(nev
lity Interval Type 0~15 er) None 15 15 Cell
HUAWEI I
Handover
HUAWEI II Enumeration NO(Close),
Handover Type YES(Open) NO, YES None NO NO Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 1~16 1~16 s 3 3 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 1~16 1~16 s 5 5 Cell
Enhanced NONE(None),
Channel DYNAMIC(Dyn
Assignment Enumeration amic power NONE,
Algorithm Type sharing) DYNAMIC None NONE NONE Cell
O&M of
BTS Interval Type 3~20 3~20 None 6 6 BTS
O&M of
BTS Interval Type 3~20 3~20 None 6 6 BTS
Enhanced
Power
Control
Algorithm Interval Type 0~4 0~4 dB 2 2 Cell
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
AU0-
AU0-0&AU1- 0&AU1-
Fast Move Enumeration NO(No),
0&AU2- 0&AU2-
Handover Type YES(Yes) NO, YES None NO NO Cell
0&AU3- 0&AU3-
AU0, AU1, 0&AU4- 0&AU4-
AU0, AU1, AU2, AU2, AU3, 0&AU5- 0&AU5-
O&M of AU3, AU4, AU5, AU4, AU5, 0&AU6- 0&AU6-
BTS Bit Field Type AU6, AU7 AU6, AU7 None 0&AU7-0 0&AU7-0 BTS
OUTSIDE_500
AH(500AH INSIDE_1
Outside 00AH,
Storage INSIDE_5
Battery),
INSIDE_100AH 0AH,
OUTSIDE_650
(100AH Inside OUTSIDE
AH(650AH
Storage _300AH,
Outside
Battery), OUTSIDE
Storage
INSIDE_50AH( _400AH,
O&M of Enumeration NO(No),
Battery),
50AH Inside OUTSIDE
BTS Type YES(Yes) NO, YES None NO NO BTS
OUTSIDE_200
Storage _500AH,
AH(200AH
Battery), OUTSIDE
Outside
OUTSIDE_300 _650AH,
O&M of Enumeration Storage
AH(300AH OUTSIDE INSIDE_50A INSIDE_50A
BTS Type Battery)
Outside _200AH None H H BTS
Storage
INSIDE_BATTE
Battery),
007C(0.07C), 007C,
RY(Inside
OUTSIDE_400
O&M of Enumeration 010C(0.10C), 010C,
Storage
AH(400AH
BTS Type 015C(0.15C) 015C None 015C 015C BTS
Battery),
Outside INSIDE_B
OUTSIDE_BAT
Storage ATTERY,
AU0-
TERY(Outside
Battery), OUTSIDE
AU0-0&AU1- 0&AU1-
O&M of Enumeration Storage
OUTSIDE_500 _BATTER INSIDE_BAT INSIDE_BA
0&AU2- 0&AU2-
BTS Type Battery)
AH(500AH Y
INSIDE_1 None TERY TTERY BTS
0&AU3- 0&AU3-
Outside 00AH,
AU0, AU1, 0&AU4- 0&AU4-
Storage
AU0, AU1, AU2, INSIDE_5
AU2, AU3, 0&AU5- 0&AU5-
O&M of Battery),
AU3, AU4, AU5,
INSIDE_100AH 0AH,
AU4, AU5, 0&AU6- 0&AU6-
BTS Bit Field Type OUTSIDE_650
AU6, AU7
(100AH Inside OUTSIDE
AU6, AU7 None 0&AU7-0 0&AU7-0 BTS
AH(650AH
Storage _300AH,
Outside
Battery), OUTSIDE
Storage
INSIDE_50AH( _400AH,
O&M of Enumeration NO(No),
Battery),
50AH Inside OUTSIDE
BTS Type YES(Yes) NO, YES None NO NO BTS
OUTSIDE_200
Storage _500AH,
AH(200AH
Battery), OUTSIDE
Outside
OUTSIDE_300 _650AH,
O&M of Enumeration Storage
AH(300AH OUTSIDE INSIDE_50A INSIDE_50A
BTS Type Battery)
Outside _200AH None H H BTS
Storage
INSIDE_BATTE
Battery),
007C(0.07C), 007C,
RY(Inside
OUTSIDE_400
O&M of Enumeration 010C(0.10C), 010C,
Storage
AH(400AH
BTS Type 015C(0.15C) 015C None 015C 015C BTS
Battery),
Outside INSIDE_B
OUTSIDE_BAT
Storage ATTERY,
AU0-
TERY(Outside
Battery), OUTSIDE
AU0-0&AU1- 0&AU1-
O&M of Enumeration Storage
OUTSIDE_500 _BATTER INSIDE_BAT INSIDE_BA
0&AU2- 0&AU2-
BTS Type Battery)
AH(500AH Y
INSIDE_1 None TERY TTERY BTS
0&AU3- 0&AU3-
Outside 00AH,
AU0, AU1, 0&AU4- 0&AU4-
Storage
AU0, AU1, AU2, INSIDE_5
AU2, AU3, 0&AU5- 0&AU5-
O&M of Battery),
AU3, AU4, AU5, 0AH,
AU4, AU5, 0&AU6- 0&AU6-
BTS Bit Field Type OUTSIDE_650
AU6, AU7 OUTSIDE
AU6, AU7 None 0&AU7-0 0&AU7-0 BTS
AH(650AH _300AH,
Outside OUTSIDE
Storage _400AH,
O&M of Enumeration NO(No),
Battery), OUTSIDE
BTS Type YES(Yes) NO, YES None NO NO BTS
OUTSIDE_200 _500AH,
AH(200AH OUTSIDE
Outside _650AH,
O&M of Enumeration Storage OUTSIDE INSIDE_50A INSIDE_50A
BTS Type Battery) _200AH None H H BTS
INSIDE_BATTE
007C(0.07C), 007C,
RY(Inside
O&M of Enumeration 010C(0.10C), 010C,
Storage
BTS Type 015C(0.15C) 015C None 015C 015C BTS
Battery), INSIDE_B
OUTSIDE_BAT ATTERY,
TERY(Outside OUTSIDE
O&M of Enumeration Storage _BATTER INSIDE_BAT INSIDE_BA
BTS Type Battery) Y None TERY TTERY BTS
Configurati
on
Manageme
nt Interval Type 0~255 0~255 None 0 0 Cell
Configurati
on
Manageme
nt Interval Type 0~255 0~255 None 0 0 Cell
Compact
BTS
GPRS Interval Type 0~255 0~255 None 0 None Cell
Automatic
Configurati
on and
Compact
Planning
BTS
Interval Type 0~255 0~255 None None None Cell
Automatic
Configurati
on and
Planning
Interval Type 0~255 0~255 None None None Cell
Compact
BTS
Automatic
Capacity
Planning Interval Type 0~255 0~255 None None None Cell
Radio
Common
Channel
Manageme
nt Interval Type -121~-104 -121~-104 dBm -109 -109 Cell
Radio
Common
Channel
Manageme
nt Interval Type 0~63 0~63 dB 16 16 Cell
Radio
Common
Channel
Manageme
nt Interval Type 0~65535 0~65535 None 5000 5000 Cell
Multi-site
Cell Interval Type -121~-104 -121~-104 dBm -109 -109 BTS
GPRS Interval Type 0~7 0~7 None 1 1 Cell
Enumeration NO(No),
GPRS Type YES(Yes) NO, YES None YES YES Cell
Radio
0dB(0dB),
Common
2dB(2dB),
Channel
4dB(4dB), 0dB, 2dB,
Manageme
6dB(6dB), 4dB, 6dB,
nt Interval Type 0~255 0~255 None 225 225 Cell
8dB(8dB), 8dB,
10dB(10dB), 10dB,
12dB(12dB), 12dB,
Enumeration 14dB(14dB), 14dB, no
GPRS Type nouse(no use) use dB 2dB 2dB Cell
10M(10M), 10M,
Abis over Enumeration 100M(100M), 100M,
AMR
IP Type AUTO(Auto) AUTO None 100M 100M BTS
Coding ALG1(Algorithm
Rate I),
Threshold ALG2(Algorithm ALG1,
Adaptive Enumeration II), ALG2,
AMR
Adjustment Type NONE(None) NONE None ALG1 ALG1 Cell
Coding
Rate DISABLE(Disab
Threshold le),
Adaptive Enumeration ENABLE(Enabl DISABLE,
Adjustment Type e) ENABLE None DISABLE DISABLE Cell
Processing
of
Measureme
nt Report Interval Type 1~255 1~255 None 4 4 BSC
LASTRBP(last
Configurati rollbackpoint),
on APPOINTRBP( LASTRBP,
Manageme Enumeration appointed APPOINT
REC_ALL(Reco
nt Type rollbackpoint) RBP None None None BSC6900
rd All),
REC_ERR(Rec REC_ALL,
ord Errors), REC_ERR
O&M of Enumeration REC_NON(Rec ,
BSC Type ord None) REC_NON None None REC_ALL BSC6900
O&M of
BTS Interval Type 0~249 0~249 None None None BTS
O&M of
BTS Interval Type 0~249 0~249 None None None BTS
INDEPENDENT
(Independent
Receiver),
DIVIDING(Divid
ing Receiver),
FOURDIVERSI INDEPEN
TY(Four DENT,
O&M of
Diversity DIVIDING,
BTS Interval Type 0~249 0~249 None None None BTS
Receiver), FOURDIV
Configurati MAINDIVERSIT ERSITY,
on Y(Main MAINDIVE
Manageme Enumeration Diversity), RSITY,
nt Type NONE(None) NONE None NONE NONE TRX
IP logical
IP QOS Interval Type 0~100 0~100 None 96 96 port
Concentric
Cell
AMR FR Interval Type 0~70 0~70 None 50 50 Cell
Concentric
Cell
AMR HR Interval Type 0~70 0~70 None 40 40 Cell
Concentric
Cell Interval Type 0~63 0~63 dB 5 5 Cell
Concentric
Cell Interval Type 0~63 0~63 dB 30 30 Cell
IP logical
IP QOS Interval Type 20~99 20~99 None 30 30 port
Concentric
Cell Interval Type 0~70 0~70 None 60 60 Cell
GSM Flow
Control Interval Type 0~50 0~50 ms 10 10 BSC
GSM Flow
Control Interval Type 0~768 0~768 None 3 3 BSC
BSC/RNC
Clock Interval Type 0~31 0~31 None 0 None Board
BSC/RNC
Clock Interval Type 0~31 0~31 None None None Board
BSC/RNC
Clock Interval Type 0~31 0~31 None 0 None Board
BSC/RNC
Clock Interval Type 0~31 0~31 None 0 None Board
BSC Node
Redundanc Compound 00:00:00~
y Type hour, min, sec 23:59:59 None None None Cell
REHOSTRIGH
TNOW(ReHost
BSC Node
RightNow), REHOSTR
Redundanc
REHOSTDELA IGHTNOW
y Interval Type 1~3600 1~3600 s 600 None Cell
Y(ReHostDelay ,
), REHOSTD
BSC Node REHOSTWHE ELAY,
Redundanc Enumeration N(ReHostWhen REHOST REHOSTDE REHOSTDE
y Type ) WHEN None LAY LAY Cell
Soft-
Synchroniz Enumeration NO(NO),
ed Network Type YES(YES) NO, YES None None NO BSC6900
O&M of OFF(OFF),
BTS POWERSHARI
Interval Type 0~62 0~62 None None None BTS
NG(Power
Sharing
Between
O&M of Enumeration NO(NO),
Boards),
BTS Type YES(YES) NO, YES None NO NO BTS
RF_FH(RF
Frequency OFF,
Hopping POWERS
O&M of Enumeration Between HARING,
BTS Type Boards) RF_FH None OFF OFF BTS
O&M of
BTS Interval Type 0~23 0~23 None None None BTS
O&M of
BTS Interval Type 0~255 0~255 None None None BTS
1~31
IP QOS String Type None characters None None None BSC6900
1~250
None String Type None characters None None None IP route
Simplified
Cell
Broadcast Interval Type 0~65535 0~65535 None None None Cell
Robust Air
Interface Enumeration NO(No),
Signalling Type YES(Yes) NO, YES None NO NO Cell
Robust Air
Interface
Signalling Interval Type 0~7 0~7 None 5 5 Cell
Robust Air
Interface Enumeration NO(No),
Signalling Type YES(Yes) NO, YES None NO NO Cell
Faulty
Manageme Enumeration NO(No),
nt Type YES(Yes) NO, YES None NO NO BTS
O&M of
BTS Interval Type 0~65535 0~65535 min 5 5 BSC
Security
Manageme
nt Interval Type 1~60 1~60 min None None BSC6900
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES BSC
O&M of
BSC
License
Manageme Enumeration NO(No),
nt Type YES(Yes) NO, YES None NO None BSC6900
Abis IP
over E1/T1
A IP over
E1/T1 Interval Type 2~5 2~5 s 3 3 PPP link
Noneed,
Abis IP
Manually,
over E1/T1
Noneed, Reset,
A IP over
Manually, Normally,
E1/T1 Interval Type 2~5 2~5 s 3 3 MP link
Reset, Correlative
Normally, ,
Faulty Correlative, Configurati
Manageme Configuration, on,
nt Bit Field Type Expired Expired None None None BSC6900
MBSC
Load
Balancing Interval Type 0~86400 0~86400 s 30 30 BSC
Resource
Reservation Interval Type 0~190 0~190 None 0 0 Cell
Configurati
on
Manageme
nt Interval Type 0~21 0~21 None 5 5 Cell
Radio TS1, TS2,
Dedicated TS3, TS4,
Channel TS5, TS6,
Manageme TS7, TS8,
nt Interval Type 0~255 0~255
TS9, s 10 10 Cell
TS10,
TS11,
O&M of TS12,
BSC Interval Type 1~100 TS13,
1~100 None 1 None BSC6900
TS14,
GBSS9.0 TS15,
System TS16,
Improveme Enumeration NO(No), TS17,
nt Type YES(Yes)
TS1, TS2, TS3, NO, YES
TS18, None NO NO BTS
TS4, TS5, TS6, TS19,
BTS GPS TS7, TS8, TS9, TS20,
4_Times,
Synchroniz Enumeration TS10, TS11,
RGPS(RGPS),
8_Times,
TS21,
RGPS,
ation Type TS12, TS13,
GPS(GPS) TS22,
GPS None GPS GPS BTS
Network 12_Times,
TS14, TS15, TS23,
Assisted 16_Times,
TS16, TS17, TS24,
Cell 20_Times,
NO(No
TS18, TS19, TS25,
Change Enumeration 24_Times,
Support),
TS20, TS21, TS26,
(NACC) Type 28_Times,
YES(Support) NO, YES None NO NO NSE
TS22, TS23, TS27,
32_Times,
TS24, TS25, TS28,
36_Times,
TS26, TS27, TS29,
40_Times,
TS28, TS29, TS30,
44_Times,
None Bit Field Type TS30, TS31 TS31 None None None None
Radio 48_Times,
Dedicated 52_Times,
Channel 56_Times, 1920~307
Manageme Enumeration 60_Times, 20, step:
nt Type 64_Times 480 ms 52_Times 52_Times Cell
STANDALONE
TC(Stand Alone
TC ), STANDAL
MASTERINPO ONETC,
Ater OLTC(Master in MASTERI
Compressio Pool TC), NPOOLTC
n SLAVEINPOOL ,
Transmissio Enumeration TC(Slave in SLAVEINP STANDALON STANDALO
n Type Pool TC) OOLTC None ETC NETC BSC
Configurati
on
Manageme
nt Interval Type 0~4095 0~4095 None None None Cell
MBSC
Load
Balancing Interval Type 0~6,255 0~6, 255 None 255 255 BSC
MBSC
Load
Balancing Interval Type 0~16 0~16 None None None BSC
MBSC
Load 1~64
Balancing String Type None characters None None None None
Security
Manageme 0~200
nt String Type None characters None None None BSC6900
0.48sec(0.48se
c),
Gb over IP Interval Type 1~100
0.96sec(0.96se 1~100 None None None BSC
c),
1.92sec(1.92se
0.48sec(0.48se
c),
c),
DISABLE(Disab
Gb over IP Interval Type 3.84sec(3.84se
1~100 1~100 None None None BSC
Voice 0.96sec(0.96se
le),
c),
Quality c),
ENABLE(Enabl DISABLE,
7.68sec(7.68se 0.48sec,
Index 1.92sec(1.92se
e), ENABLE,
c), 0.96sec,
(Uplink Enumeration c),
UNSUPPORT( UNSUPP
15.36sec(15.36 1.92sec,
VQI) Type 3.84sec(3.84se
Unsupport) ORT None DISABLE DISABLE Cell
sec), 3.84sec,
c),
30.72sec(30.72 7.68sec,
7.68sec(7.68se 0.48sec,
Networking sec), 15.36sec,
c), 0.96sec,
Control Enumeration 61.44sec(61.44 30.72sec,
15.36sec(15.36 1.92sec,
Mode Type sec) 61.44sec s 15.36sec 15.36sec Cell
sec), 3.84sec,
30.72sec(30.72 7.68sec,
Networking sec), 15.36sec,
Control Enumeration 61.44sec(61.44 30.72sec,
Mode Type sec) 61.44sec s 0.96sec 0.96sec Cell
IP logical
IP QOS Interval Type 20~99 20~99 None 20 20 port
Voice
Quality
Index NO(Not report),
(Uplink Enumeration YES(Report), NO, YES,
TCH:0~14
VQI) Type NONE(None) NONE None NO NO Cell
Enhanced 880,
MINUS_52db(-
Measureme step:480;
52db),
nt SDCCH:0
MINUS_48db(-
Report(EM ~14570,
TCH:0~14
Interval Type 48db), MINUS_52
R) 0~31 step:470 ms 2 2 Cell
Enhanced MINUS_44db(- 880,
db,
Measureme 44db), step:480;
MINUS_48
nt MINUS_40db(- SDCCH:0
db,
Report(EM 40db), ~14570,
MINUS_44
R) Interval Type MINUS_36db(-
0~31 step:470
db, ms 6 6 Cell
36db), MINUS_40
MINUS_32db(- db,
32db), MINUS_36
IP QOS Interval Type MINUS_28db(-
0~2047 db,
0~2047 None None None AAL2 path
28db), MINUS_32
MINUS_24db(- db, Transmissi
24db), MINUS_28 on
Enumeration SHARE(SHAR
MINUS_20db(- db, resource
None Type E)
20db), SHARE
MINUS_24 None None None group
MINUS_16db(- db,
16db), MINUS_20
SHARE,
Enumeration MINUS_12db(-
SHARE, db,
EXCLUSI IP logical
IP QOS Type 12db),
EXCLUSIVE MINUS_16
VE None None None port
MINUS_10db(- db,
HUAWEI I 10db), MINUS_12
GSM/WCD
Handover MINUS_8db(- db,
MA
HUAWEI II 8db), MINUS_10
Interoperabi
Handover Interval Type 0~255
MINUS_6db(- 0~255
db, s 5 5 Cell
lity
GSM/TD- 6db), MINUS_8d
GSM/WCD MINUS_4db(- b,
SCDMA
MA 4db), MINUS_6d
Interoperabi
Interoperabi
lity Interval Type MINUS_2db(-
0~63 b,
0~63 dB 3 3 Cell
lity 2db), MINUS_4d
GSM/TD- Zerodb(0db), b,
SCDMA 2db(2db), MINUS_2d
Interoperabi 4db(4db), b, Zerodb,
lity Interval Type 0~63
6db(6db), 0~63
2db, 4db, dB 30 30 Cell
8db(8db), 6db, 8db,
BASIS_OF
10db(10db), 10db,
_B1,
Enumeration 12db(12db),
BASIS_OF_B1, 12db,
BASIS_OF
None Type 16db(16db),
BASIS_OF_B2 16db,
_B2 None None None Board
20db(20db), 20db,
BASIS_OF
24db(24db), 24db,
_B1,
28db(28db), 28db,
Enumeration BASIS_OF_B1, BASIS_OF
32db(32db), 32db,
None Type BASIS_OF_B2 _B2 None None None Board
36db(36db), 36db,
40db(40db), 40db,
44db(44db), 44db,
Enumeration 48db(48db), 48db, no
GPRS Type nouse(no use) use dB MINUS_2db MINUS_2db Cell
O&M of Transport
BTS Interval Type 0~64 0~64 kbit/s None None channel
O&M of
BTS Interval Type 0~63 0~63 None None None BSC6900
O&M of
BTS Interval Type 0~7 0~7 None None None BSC6900
O&M of Transport
BTS Interval Type 0~64 0~64 kbit/s None None channel
O&M of
BTS Interval Type 2~4094 2~4094 None None None BSC6900
COMMISSIONI
Abis over
NG(Commissio
IP Interval Type 0~96 0~96 None 4 Set this 4 BTS
ning), COMMISS
parameter to
Configurati UPGRADE(Upg IONING,
about 68 in
on rade), UPGRAD
densely
Manageme Enumeration RESTORE(Res E,
2G/3G populated
nt Type tore) RESTORE None None None BSC6900
Neighborin urban areas
g Cell and about
Automatic 72 in
Optimizatio suburban
n Interval Type 0~127 0~127 dB 68 areas. BSC
O&M of 1~50
BSC String Type None characters None None None BSC6900
A Interface
Protocol Enumeration OFF(OFF),
Process Type ON(ON) OFF, ON None OFF OFF SCCP
Abis IP
over E1/T1 Interval Type 1~65535 1~65535 ms 3000 3000 PPP link
Emergency
Call Service
(TS12) Interval Type 0~190 0~190 None 0 0 Cell
Enumeration OFF(OFF),
None Type ON(ON) OFF, ON None None None BSC6900
0~429496
None Interval Type 0~4294967295 7295 None None None BSC6900
Enumeration OFF(OFF),
None Type ON(ON) OFF, ON None None None BSC6900
Enumeration OFF(OFF),
None Type ON(ON) OFF, ON None None None BSC6900
Enumeration OFF(OFF),
None Type ON(ON) OFF, ON None None None BSC6900
Enumeration OFF(OFF),
None Type ON(ON) OFF, ON None None None BSC6900
Enumeration OFF(OFF),
None Type ON(ON) OFF, ON None None None BSC6900
0~429496
None Interval Type 0~4294967295 7295 None None None BSC6900
0~429496
None Interval Type 0~4294967295 7295 None None None BSC6900
0~429496
None Interval Type 0~4294967295 7295 None None None BSC6900
TRX Power
Amplifier
Intelligent
NON-
Shutdown Interval Type 0~3 0~3 None 2 2 BSC
REVERTIVE(N NON-
ON- REVERTI
REVERTIVE), VE, MSP
Board Enumeration REVERTIVE(R REVERTI protect
Switchover Type EVERTIVE) VE None None None group
0~429496
A over IP Interval Type 0~4294967295 7295 None 4294967295 4294967295 SCCP
Enumeration OFF(Close),
A over IP Type ON(Open) OFF, ON None ON ON BSC6900
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None BSC6900
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None BSC6900
Abis over
IP Interval Type 0~15 0~15 None None None BTS
500~6000
A over IP Interval Type 500~60000 0 ms 1000 1000 SCTP link
500~6000
A over IP Interval Type 500~60000 0 ms 3000 3000 SCTP link
500~6000
AMR
A over IP Interval Type 500~60000 0 ms 1000 1000 SCTP link
Coding
Rate DISABLE(Disab
Threshold le),
Adaptive Enumeration ENABLE(Enabl DISABLE,
Adjustment Type e) ENABLE None DISABLE DISABLE Cell
Latency
Reduction Interval Type 10~80 10~80 None 30 30 Cell
NEXTHOP(Nex
t Hop),
Abis over Enumeration OUTIF(Out NEXTHOP
IP Type Interface) , OUTIF None None None BTS
IP logical
IP QOS Interval Type 0~1000 0~1000 None 5 In dual-band5 port
networking
mode for
densely
populated IP logical
IP QOS Interval Type 1~100 1~100 None 5 urban areas,5 port
the level
drops rapidly
O&M of due to
BTS Interval Type 0~999 0~999 None None multiple
None BTS
barriers. The
propagation
loss of the
1~300000 1800 MHz
IP QOS Interval Type 1~3000000 0 kbit/s None None
frequency IP path
band is Transmissi
greater than on
0~400000 the resource
IP QOS Interval Type 0~4000000 0 kbit/s None propagation
None group
loss of the
900 MHz
frequency
band.
GPRS Interval Type 0~63 0~63 None 2 Considering2 Cell
the
preceding
factors, you
AMR FR Interval Type 0~70 0~70 None 5 can set this 5 Cell
parameter to
YES for the
System
DCS1800
Information
cell. Under
Sending Interval Type 0~63 0~63 dB 8 8 Cell
normal
HUAWEI I conditions,
Handover set this
HUAWEI II Enumeration NO(No), parameter to
Handover Type YES(Yes) NO, YES None NO No. Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 60 60 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 42 42 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 41 41 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 40 40 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 50 50 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 49 49 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 48 48 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 47 47 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 46 46 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 45 45 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 44 44 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 43 43 Cell
O&M of
BTS Interval Type 0~249 0~249 None None None TRX
O&M of
BTS Interval Type 0~249 0~249 None None None BTS
O&M of
RXUNAME(By
BTS Interval Type 0~249 0~249 None None None BTS
RXU Name),
RXUPOS(By RXUNAM
RXU Position E,
O&M of Enumeration No), SRNSN(By RXUPOS,
RXUNAME(RX
BTS Type Subrack No) SRNSN None None None TRX
UName),
RXUPOS(RXU RXUNAM
POS), E,
O&M of Enumeration SRNSN(SRNS RXUPOS,
BTS Type N) SRNSN None None None BTS
O&M of 1~64
BTS String Type None characters None None None TRX
O&M of 1~64
BTS String Type None characters None None None BTS
O&M of 1~64
BTS String Type None characters None None None BTS
O&M of
BTS Interval Type 1~6 1~6 None None None TRX
O&M of
BTS Interval Type 1~6 1~6 None None None BTS
DRRU(DRRU),
DRFU(DRFU), DRRU,
O&M of
MRRU(MRRU), DRFU,
BTS Interval Type 1~6 1~6 None None None BTS
MRFU(MRFU), MRRU,
GRFU(GRFU), MRFU,
GRRU(GRRU), GRRU,
O&M of Enumeration BTS3900E(BTS GRFU,
BTS Type 3900E) BTS3900E None None None BTS
Enumeration OFF(OFF),
None Type ON(ON) OFF, ON None OFF OFF Board
48VDISAB
LE,
RES0,
RES1,
RES2,
48VDISABLE, TSDISABL
None Interval Type 0~15 BT1_DISA
0~15 None None None Board
RES0, RES1, ED,
BLE(0),
RES2, HSDISAB
AH_DISA
Faulty TSDISABLED, LED,
BLE(1),
Manageme HSDISABLED, RES3,
AT1_DISA
nt Bit Field Type RES3, RES4 RES4 None None None BTS
BT1_DISABLE, BLE(2),
AH_DISABLE, AT2_DISA
AT1_DISABLE, BLE(3),
O&M of AT2_DISABLE, BT2_DISA
BTS Bit Field Type BT2_DISABLE BLE(4) None None None BTS
Public
Voice
Group Call Enumeration NO(No),
Service Type YES(Yes) NO, YES None NO NO BSC6900
Network
Support Enumeration NO(No),
SAIC Type YES(Yes) NO, YES None NO NO Cell
Network
Support
SAIC Interval Type 0~2 T1_DISAB
0~2 None 1 1 Cell
LE,
ET_DISAB
Network
LE,
Support
ET1_DISA
SAIC Interval Type 0~4 0~4 None 3 3 Cell
T1_DISABLE, BLE,
ET_DISABLE, ET2_DISA
Faulty ET1_DISABLE, BLE,
Manageme ET2_DISABLE, T2_DISAB
nt Bit Field Type T2_DISABLE LE None None None BTS
Dynamic
Cell Power
Off Interval Type 0~2047 0~2047 None None None Cell
Dynamic BYNAME(By
Cell Power Enumeration name), BYNAME,
Off Type BYID(By index) BYID None BYNAME BYNAME Cell
Dynamic
Cell Power
Off Interval Type 1~16 1~16 None 5 5 Cell
Dynamic
Cell Power
Off Interval Type 0~100 0~100 per cent 50 50 Cell
Dynamic
Cell Power 1~64
Off String Type None characters None None None Cell
Radio
Dedicated
Channel
Manageme 0~30240,
nt Interval Type 0~63 step: 480 ms 32 32 Cell
WATER_I
MMERSE
WIDISABL
Faulty WATER_IMME D, SMOG,
E,
Manageme RSED, SMOG, GM_DISA
SMDISAB
nt Bit Field Type GM_DISABLE BLE None None None BTS
LE,
WIDISABLE, IMDISABL
Faulty SMDISABLE, E,
Manageme IMDISABLE, GMDISAB
nt Bit Field Type GMDISABLE LE None None None BTS
WILOW, WILOW,
Faulty SMLOW, SMLOW,
Manageme IMLOW, IMLOW,
nt Bit Field Type GMLOW GMLOW, None None None BTS
Soft-
Synchroniz
ed Network Interval Type 0~2047 0~2047 None None None BSC6900
Soft-
Synchroniz 1~64
ADD0dB(+0dB)
ed Network String Type None characters None None None BSC6900
Enhanced ,
Measureme ADD10dB(+10d
nt B), ADD0dB,
Report(EM Enumeration Automatic(Auto ADD10dB,
R) Type matic) Automatic None ADD0dB ADD0dB Cell
TCH:480~
Gb over IP Interval Type 0~63 0~63 None 38 38 BSC
9600,
step:480;
SDCCH:4
Fast Move 70~9400,
Handover Interval Type 1~20 step:470 ms 4 4 Cell
Windows), S-874,
BINARY(BINAR WINDOW
Y), S-1253,
UCS2(UCS2), WINDOW
RCS- S-1254,
1(Reserved WINDOW
Code Scheme S-1255,
Configurati 1), RCS- WINDOW
on 2(Reserved S-1257,
Manageme Code Scheme WINDOW
nt Interval Type 2), RCS-
0~2047 S-1250,
0~2047 None None None BSC6900
3(Reserved WINDOW
Code Scheme S-1252,
3), RCS- BINARY,
O&M of 1~64
4(Reserved UCS2,
BTS String Type None characters None None None BSC6900
Code Scheme RCS-1,
4), RCS- RCS-2,
Simplified 5(Reserved RCS-3,
Cell Enumeration Code Scheme RCS-4,
Broadcast Type 5) RCS-5 None None ENGLISH Cell
Valid
O&M of
command
BTS Interval Type 0~7 0~7 None None None None
string,
without the
';'at the
O&M of end of the
BSC Any Type None string. None None None BSC6900
BYBTSID(By
BTS ID),
O&M of Enumeration BYCELLID(By BYBTSID,
BSC Type Cell ID) BYCELLID None BYCELLID BYCELLID None
GSM/WCD
MA
O&M of
Interoperabi
BSC Interval Type 0~23 0~23 None None None None
lity
GSM/TD-
SCDMA
Interoperabi
lity Interval Type 0~511 0~511 None None 0 Cell
Faulty
Manageme 1~214748
nt Interval Type 1~2147483646 3646 None 1 1 BSC6900
A over IP Interval Type 0~1199 0~1199 None None None SCTP link
2000-1-
O&M of Compound year, month, 1~2037-
BSC Type date 12-31 None None None BSC6900
Faulty 2000-1-
Manageme Compound year, month, 1~2037-
nt Type day 12-31 None None None BSC6900
Faulty 2000-1-
Manageme Compound year, month, 1~2037-
nt Type day 12-31 None None None BSC6900
Faulty
Manageme
nt Interval Type 7~90 7~90 d None None BSC6900
1E-3, 1E-
4, 1E-5,
1E-3, 1E-4, 1E- 1E-6, 1E- MSP
Board Enumeration 5, 1E-6, 1E-7, 7, 1E-8, protect
Switchover Type 1E-8, 1E-9 1E-9 None 1.00E-06 1.00E-06 group
2000-01-
O&M of Compound year, month, 01~2050-
BTS Type day 12-31 None None None None
Configurati
on
Manageme
nt Interval Type 1~31 1~31 d None None BSC6900
Configurati
on
Manageme
nt Interval Type 1~191 1~191 None 1 1 BTS
Assignment
and
Immediate Enumeration OFF(Off),
Assignment Type ON(On) OFF, ON None OFF OFF Cell
Assignment
and
Immediate 0~10,
Assignment Interval Type 0~100 step:0.1 s 10 10 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~63 0~63 dB 6 6 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~70 0~70 None 55 55 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~63 0~63 dB 6 6 Cell
Radio
Dedicated
Channel
Manageme
nt Interval Type 0~70 0~70 None 55 55 Cell
SDCCH
Dynamic Enumeration NO(No),
Adjustment Type YES(Yes) NO, YES None YES YES Cell
MSP
Board Enumeration DISABLE, DISABLE, protect
Switchover Type ENABLE ENABLE None None DISABLE group
A5/1
Encryption
Flow
Optimizatio Enumeration OFF(Off),
n Type ON(On) OFF, ON None OFF OFF Cell
Active DISABLE(Disab
Backup le),
Power Enumeration ENABLE(Enabl DISABLE,
Control Type e) ENABLE None ENABLE ENABLE TRX
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~60 0~60 s 2 2 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 0~5 0~5 None 1 1 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~255 0~255 s 40 40 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~63 0~63 dB 30 30 Cell
MSP
Board Enumeration HIGH(HIGH), HIGH, protect
Switchover Type LOW(LOW) LOW None None None group
O&M of degree
BTS Interval Type 40~70 40~70 Celsius 53 53 BTS
Faulty
Manageme
nt Interval Type 0~65535 0~65535 s None None BTS
ed value is
"465". If
"Power
System
Type" is
"SC48200",
the
recommend
Faulty
ed value is
Manageme
"460".
nt Interval Type 0~65535 0~65535 s None None BTS
Otherwise,
the
recommend
O&M of 35.0~55.3 ed value is
BTS Interval Type 350~553 (step: 0.1) V None "430". BTS
Enhanced
Measureme
nt
Report(EM Enumeration NO(No),
R) Type YES(Yes) NO, YES None YES YES Cell
O&M of 1~63
BTS String Type None characters None None None None
System
Information Enumeration NO(No),
Sending Type YES(Yes) NO, YES None YES YES BSC
End-to-End
MS
Signaling Enumeration NO(No),
Tracing Type YES(Yes) NO, YES None NO NO BSC
HUAWEI I
Handover NoPriority(No
HUAWEI II Enumeration NO(No),
Priority),
Handover Type YES(Yes)
Priority4(Priority NO, YES None NO NO Cell
4),
A Interface Priority3(Priority
NoPriority(No
Protocol Enumeration 3),
NO(No),
Priority),
Point To
Process Type Priority2(Priority
YES(Yes) NO, YES None NO NO MSC
Point Short Priority4(Priority
2),
Message 4),
Priority1(Priority NoPriority,
Service Priority3(Priority
1), Priority4,
(TS21, Enumeration 3),
NO(No),
Priority0(Priority Priority3,
TS22) Type Priority2(Priority
YES(Yes) NO, YES None YES YES BSC
0), Priority2,
2),
PriorityB(Priorit Priority1,
Priority1(Priority NoPriority,
y B), Priority0,
1), Priority4,
Group Call Enumeration PriorityA(Priorit PriorityB,
Priority0(Priority Priority3,
EMLPP Type y A) PriorityA None NoPriority NoPriority Cell
0), Priority2,
PriorityB(Priorit Priority1,
y B), Priority0,
Group Call Enumeration PriorityA(Priorit PriorityB,
EMLPP Type y A) PriorityA None NoPriority NoPriority Cell
Multi-
Carrier
Intelligent
Voltage Enumeration NO(NO),
Regulation Type YES(YES) NO, YES None None None BTS
System
Information Enumeration NO(No),
Sending Type YES(Yes) NO, YES None NO NO BSC
System
Information Enumeration NO(No),
Sending Type YES(Yes) NO, YES None YES YES BSC
System
Information Enumeration NO(No),
Sending Type YES(Yes) NO, YES None YES YES BSC
O&M of
BTS Interval Type 0~6 0~6 None None None BTS
SUPPORT(Sup SUPPORT
port), ,
O&M of Enumeration UNSUPPORT( UNSUPP UNSUPPOR
BTS Type Not Support) ORT None T None BTS
O&M of 1000~655
BSC Interval Type 1024~65535 35 None None None BSC6900
O&M of 1000~655
BSC Interval Type 1024~65535 35 None None None BSC6900
Remote
Electrical 1~17
Tilt String Type None characters None None None BTS
0.0.0.0~25
O&M of IP Address 5.255.255.
BSC Type None 255 None None None BSC6900
SEPARATE(Se
parate), SEPARAT
TOGETHER(To E,
Enumeration gether), TOGETHE
A over IP Type AIP(AIP) R, AIP None SEPARATE SEPARATE BSC
TDM,
TDM, HDLC, HDLC,
Abis over Enumeration HDLC_HubBTS HubBTS,
IP Type , IP IP None TDM TDM BTS
PICO
Automatic
Configurati
on and Enumeration TDM,
Planning Type TDM, HDLC, IP HDLC, IP None None None BTS
m Command),
CONFIG(Config
OML(OML),
uration
RSL(RSL),
Management),
EML(EML),
MAINTAIN(Mai
ESL(ESL), OML,
ntenance
CSVOICE(CS RSL, EML,
O&M of Management), SYSTEM,
Voice), ESL,
BSC STAT(Statistic CONFIG,
CSDATA(CS CSVOICE,
Security Measurement), MAINTAIN
Data), CSDATA,
Manageme Enumeration ALARM(Alarm , STAT,
PSHIGHPRI(P PSHIGHP
nt Type Management) ALARM None None None BSC6900
S High PRI), RI,
PSLOWPRI(PS PSLOWP
Low PRI), RI,
Abis over Enumeration OTHERDATA(O OTHERDA
IP Type ther Data) TA None None None BTS
O&M of
BTS Interval Type 0~5 0~5 None None None BTS
SGSN Pool Interval Type 0~65535 0~65535 None 1800 1800 BSC
Configurati
on
Manageme 1~20
nt String Type None characters None None None BSC
Enumeration NO(No),
SGSN Pool Type YES(Yes) NO, YES None NO NO BSC
Release
98 or
0( Release 98 older,
or older), Release
Enumeration 1(Release 99 99 Release 99 Release 99
GPRS Type onwards) onwards None onwards onwards Cell
UNISTALL(Unin
stall), UNISTALL
Enumeration ALLOW(Allow), , ALLOW,
SGSN Pool Type DENY(Deny) DENY None ALLOW ALLOW BSC
GSM Flow
Control Interval Type 50~95 50~95 per cent 75 75 BSC
O&M of
BSC Interval Type 0~27 0~27 None None None BSC
System
Information Enumeration NO(No),
Sending Type YES(Yes) NO, YES None YES YES BSC
HUAWEI I
Handover
HUAWEI II Enumeration NO(No),
Handover Type YES(Yes) NO, YES None NO NO Cell
Soft-
Synchroniz
ed Network Interval Type 1~10 1~10 None 4 4 BSC6900
A Interface
Protocol
Process Interval Type 0~186 0~186 None None None SCCP
A Interface
Protocol
Process Interval Type 0~186 0~186 None None None SCCP
A over IP Interval Type 0~15 0~15 None None None BSC6900
Soft-
Synchroniz
TCH:480~
ed Network Interval Type 1~10 1~10 None 5 5 BSC6900
14880,
HUAWEI I step:480;
Handover SDCCH:4
HUAWEI II 70~14570,
Handover Interval Type 1~31 step:470 ms 2 2 Cell
A Interface
Protocol
TCH:480~
Process Interval Type 0~15 0~15 None None None None
14880,
HUAWEI I step:480;
Handover SDCCH:4
HUAWEI II 70~14570,
Handover Interval Type 1~31 step:470 ms 2 2 Cell
Load
Sharing Interval Type 0~65535 0~65535 ms 3000 3000 BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
O&M of 1~32
BSC String Type None characters None None None BSC
0.0.0.0~25
IP Address 5.255.255. Ethernet
None Type None 255 None None None port
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None None
O&M of
BSC Interval Type 0~65535 0~65535 None None None BSC6900
Soft-
Synchroniz
ed Network Interval Type 0~255 0~255 None 255 None BSC6900
0.0.0.0~25
Clock over IP Address 5.255.255.
IP Type None 255 None None None BTS
Multi-site
E1SELFLOOP(
Cell Interval Type 0~35 0~35 None None None BTS
E1 Self
Loopback), E1SELFL
IASUSELFLOO OOP,
BTS Test Enumeration P(IASU Self IASUSELF
Function Type Loopback) LOOP None None None None
B0101(B0101), B0101,
B0110(B0110), B0110,
B0111(B0111), B0111,
B1000(B1000), B1000,
B1001(B1001), B1001,
B1010(B1010), B1010,
B1011(B1011), B1011,
B1100(B1100), B1100,
A Interface B1101(B1101), B1101,
Protocol Enumeration B1110(B1110), B1110,
Process Type B1111(B1111) B1111 None B0000 B0000 SCCP
BSC Node
DATE(Input
Redundanc
with date),
y Interval Type 1~600 1~600 s 300 300 BSC
WEEK(Input
Configurati with week), DATE,
on DATEWEEK(In WEEK,
Manageme Enumeration put with date DATEWEE
nt Type and week) K None None None BSC6900
JAN(January),
None Interval Type 0~3
FEB(February), 0~3 None None None BSC
MAR(March),
NOTSUPPORT NOTSUPP
APR(April),
(Not Support), ORT,
Enumeration MAY(May),
INNER(Inner), INNER, NOTSUPPO
None Type JUN(June),
OUTER(Outer) OUTER None None RT BSC
JUL(July),
AUG(August),
Faulty
SEP(Septembe JAN, FEB,
Manageme Enumeration CLOSE(Close), CLOSE,
r), MAR,
nt Type OPEN(Open) OPEN None OPEN None None
OCT(October), APR, MAY,
Configurati NOV(November JUN, JUL,
on ), AUG, SEP,
Manageme Enumeration DEC(December OCT, NOV,
nt Type ) DEC None None None BSC6900
Flow
Control Interval Type 2~2000 2~2000 None 10 10 None
Configurati
on
Manageme
nt Interval Type 0~27 0~27 None None None None
Configurati
on
Manageme
nt Interval Type 0~3,8~27 0~3, 8~27 None None None None
0, 2, 4, 8, Transmissi
0,2,4,8,10,12,1 10, 12, 14, on
4,16,18,20,22,2 16, 18, 20, resource
None Interval Type 4,26 22, 24, 26 None None None group
0, 2, 4, 8,
0,2,4,8,10,12,1 10, 12, 14,
4,16,18,20,22,2 16, 18, 20,
A over IP Interval Type 4,26 22, 24, 26 None None None BSC6900
None Interval Type 0~5,8~27 0~5, 8~27 None None None E1/T1 link
None Interval Type 0~5,8~27 0~5, 8~27 None None None E1/T1 link
Transmissi
on
O&M of resource
BSC Interval Type 0~27 0~27 None None None group
Faulty
Manageme
nt Interval Type 0~27 0~27 None None None BSC6900
Faulty
Manageme
nt Interval Type 0~27 0~27 None None None BSC6900
None Interval Type 0~5,8~27 0~5, 8~27 None None None BSC6900
0, 2, 4, 8,
0,2,4,8,10,12,1 10, 12, 14,
4,16,18,20,22,2 16, 18, 20,
None Interval Type 4,26 22, 24, 26 None None None None
Configurati
on
Manageme
nt Interval Type 0~27 0~27 None None None Cell
MBSC
Load
Balancing Interval Type 0~27 {0~27} None None None BSC
O&M of
BTS Interval Type 0~23 0~23 None None None BTS
IP Fault
Detection
Based on
BFD Interval Type 0~23 0~23 None 6 6 BTS
Configurati 0, 2, 4, 8,
on 0,2,4,8,10,12,1 10, 12, 14,
Manageme 4,16,18,20,22,2 16, 18, 20,
nt Interval Type 4,26 22, 24, 26 None None None Board
SGL_ANTENN
A(Single
Feeder[1TX +
1RX]),
SGLDOUBLE_
SGL_ANTENN
NOCOMB(No
ANTENNA(Sing Transmissi
A(Single
Combination),
le Feeder[1TX on
Feeder[1TX
PBT(PBT), +
O&M of + 2RX]), resource
1RX]),
WBANDCOMB(
BSC Interval Type DOUBLE_ANT
0~27 0~27 None None None group
SGLDOUBLE_
Wideband
SGL_ANTENN
ENNA(Double
ANTENNA(Sing
Combination),
A(Single
Feeder[2TX + SGL_ANT
le Feeder[1TX
DIVERSITY(Tra
Feeder[1TX +
2RX]), ENNA,
O&M of + 2RX]),
nsmit Diversity),
1RX]),
DOUBLEFOUR SGLDOUB
BTS Interval Type DOUBLE_ANT
DDIVERSITY(D
0~23 NOCOMB,
0~23 None None None BTS
SGLDOUBLE_
_ANTENNA(Do LE_ANTE
SGL_ANTENN
ENNA(Double
ynamic PBT,
ANTENNA(Sing
uble NNA,
A(Single
Feeder[2TX
Transmit + SGL_ANT
WBANDC
le Feeder[1TX
Feeder[2TX + DOUBLE_
Feeder[1TX
2RX]),
Diversity), + ENNA,
OMB,
O&M of + 2RX]),
4RX]), ANTENNA
1RX]),
DOUBLEFOUR
DPBT(DPBT), SGLDOUB
DIVERSIT
BTS Interval Type DOUBLE_ANT
DOUBLESINGL
0~27 ,0~27 None None None BTS
SGLDOUBLE_
_ANTENNA(Do
DTIC(Transmit LE_ANTE
Y,
ENNA(Double
E_ANTENNA(D DOUBLEF
Configurati ANTENNA(Sing
uble
Independency NNA,
DDIVERSI
Feeder[2TX
ouble + SGL_ANT
OUR_ANT
on le
or Feeder[1TX
Feeder[2TX + DOUBLE_
TY, DPBT,
2RX]),
Feeder[1TX + ENNA,
Manageme Enumeration + 2RX]),
4RX]),
Combination), ANTENNA
DTIC,
DOUBLEFOUR
1RX]), SGLDOUB
DOUBLES
nt Type DOUBLE_ANT
DOUBLESINGL
NONE(none) ,NONE None NONE NONE TRX
_ANTENNA(Do
DOUBLEDOUB LE_ANTE
INGLE_A
ENNA(Double
E_ANTENNA(D DOUBLEF
uble
LE_ANTENNA( NNA,
NTENNA,
Feeder[2TX
ouble + SGL_ANT
OUR_ANT
Feeder[2TX
Double + DOUBLE_
DOUBLED
2RX]),
Feeder[1TX + ENNA,
O&M of Enumeration 4RX]),
Feeder[1TX + ANTENNA
OUBLE_A DOUBLE_A DOUBLE_A
DOUBLEFOUR
1RX]), SGLDOUB
DOUBLES
BTS Type DOUBLESINGL
2RX]) ,NTENNA None NTENNA NTENNA BTS
_ANTENNA(Do
DOUBLEDOUB LE_ANTE
INGLE_A
E_ANTENNA(D DOUBLEF
uble
LE_ANTENNA( NNA,
NTENNA,
ouble OUR_ANT
Feeder[2TX
Double + DOUBLE_
DOUBLED
Feeder[1TX + ENNA,
O&M of Enumeration 4RX]),
Feeder[1TX + ANTENNA
OUBLE_A DOUBLE_A DOUBLE_A
1RX]), DOUBLES
BTS Type DOUBLESINGL
2RX]) ,NTENNA None NTENNA NTENNA BTS
SGL_ANTENN
DOUBLEDOUB INGLE_A
E_ANTENNA(D DOUBLEF
A(Single
LE_ANTENNA( NTENNA,
ouble OUR_ANT
Feeder[1TX
Double + DOUBLED
Feeder[1TX + ENNA,
O&M of Enumeration 1RX]),
Feeder[1TX + OUBLE_A DOUBLE_A DOUBLE_A
1RX]), DOUBLES
BTS Type DOUBLESINGL
2RX]) NTENNA None NTENNA NTENNA BTS
DOUBLEDOUB INGLE_A
E_ANTENNA(D
LE_ANTENNA( NTENNA,
ouble SGL_ANT
Double DOUBLED
Feeder[1TX + ENNA,
O&M of Enumeration Feeder[1TX + OUBLE_A DOUBLE_A DOUBLE_A
1RX]), DOUBLES
BTS Type 2RX]) NTENNA None NTENNA NTENNA BTS
DOUBLEDOUB INGLE_A
LE_ANTENNA( NTENNA,
Double DOUBLED
O&M of Enumeration Feeder[1TX + OUBLE_A SGL_ANTEN SGL_ANTE
BTS Type 2RX]) NTENNA None NA NNA BTS
O&M of
1~16383(B
BSC Interval Type 1~60 1~60 min None None BSC6900
IT14),
1~65535(B
A Interface IT16),
Protocol 1~167772
Process Interval Type 1~16777215 15(BIT24) None None None SCCP
O&M of
WNF(Whole
BSC Interval Type 0~65535 L11_FORB
0~65535 None L11_FORBID
None L11_FORBI
None PBE1T1
Number ET_DISAB
ID, - D-
Format), LE0,
L12_FOR 0&L12_FOR 0&L12_FOR
A Interface DNF(Divided ET_DISAB
BID, BID- BID-
Protocol Enumeration Number LE1,
L13_FOR 0&L13_FOR 0&L13_FOR
Process Type Format) SMDISAB
WNF, DNF None WNF WNF SCCP
Radio L11_FORBID, BID, BID- BID-
LE,
Common L12_FORBID, L14_FOR 0&L14_FOR 0&L14_FOR
WIDISABL
Channel L13_FORBID, BID, BID- BID-
ET_DISABLE0, E,
Manageme L14_FORBID, L15_FOR 0&L15_FOR 0&L15_FOR
ET_DISABLE1, GMDISAB
nt Bit Field Type L15_FORBID SMDISAB
BID None BID-0 BID-0 Cell
SMDISABLE, LE,
LE,
WIDISABLE, ARRESTE
WIDISABL
Faulty GMDISABLE, R1,
E,
Manageme ARRESTER1, ARRESTE
GMDISAB
nt Bit Field Type ARRESTER2 R2 None None None BTS
SMDISABLE, LE,
WIDISABLE, ARRESTE
Faulty GMDISABLE, R1,
Manageme ARRESTER1, ARRESTE
nt Bit Field Type ARRESTER2 R2 None None None BTS
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None YES YES MSC
A Interface
Protocol Enumeration NO(No),
Process Type YES(Yes) NO, YES None NO NO MSC
PSMODE(Proto
col Standard
Group Call Mode), PSMODE,
Reliability Enumeration VGCSMODE(V VGCSMO
Enhancing Type GCS Mode) DE None PSMODE PSMODE BTS
PSMODE(Proto
col Standard
Group Call Mode), PSMODE,
Reliability Enumeration VGCSMODE(V VGCSMO
Enhancing Type GCS Mode) DE None PSMODE PSMODE BTS
Group Call
Reliability Enumeration FR(FR),
Enhancing Type EFR(EFR) FR, EFR None FR FR BTS
MBSC NO(No
Load Enumeration Support),
Balancing Type YES(Support) NO, YES None NO NO BSC
MBSC NO(No
Load Enumeration Support),
Balancing Type YES(Support) NO, YES None NO NO BSC
UNSUPPORT(
Not Support), UNSUPP
PS Enumeration SUPPORT(Sup ORT, UNSUPPOR
Handover Type port) SUPPORT None T None Cell
UNSUPPORT(
Not Support), UNSUPP
PS Enumeration SUPPORT(Sup ORT, UNSUPPOR
Handover Type port) SUPPORT None T None Cell
Network
Assisted
Cell
Change Enumeration NO(NO),
(NACC) Type YES(YES) NO, YES None NO NO BSC
Public
Voice
Group Call Enumeration NO(No),
Service Type YES(Yes) NO, YES None NO NO BSC6900
Enumeration NO(No),
GPRS Type YES(Yes) NO, YES None NO NO BSC
Enumeration NO(No),
GPRS Type YES(Yes) NO, YES None NO NO BSC
Enumeration NO(No),
GPRS Type YES(Yes) NO, YES None NO NO BSC
Enumeration NO(No),
GPRS Type YES(Yes) NO, YES None NO NO BSC
If the
If the
version of a
software
GSM base
RAN Enumeration NO(No), version of
station is
Sharing Type YES(Yes) NO, YES None NO the
NO BSC
BTS3000V1
SingleRAN
UNSUPPORT( 00R009 or
BTS is
Not Support), UNSUPP later, or if
SRAN3.0 or
Latency Enumeration SUPPORT(Sup ORT, UNSUPPOR the version
later, the
Reduction Type port) SUPPORT None T of
Nonea multi- Cell
parameter Is
mode 3900
support
series base
SRAN mode
station is
RAN Enumeration NO(NO), needs to be
V100R002
Sharing Type YES(YES) NO, YES None NO set
NO to BTS
or later, the
SUPPORT(
recommend
Support). If
YES(Support), ed value of
the software
O&M of Enumeration NO(Not this
version of
BSC Type Support) YES, NO None None parameter
None is BSC6900
the
SUPPORT.
SingleRAN
Otherwise,
A Interface BTS is
the
Protocol earlier than
recommend
Process Interval Type 0~4 0~4 None None SRAN3.0,
None SCCP
ed value of
the
SUPPORT(Sup SUPPORT this
parameter Is
port), , parameter is
support
O&M of Enumeration NOT_SUPPOR NOT_SUP NOT_SUPP NOT_SUPP
SRAN mode
BTS Type SUPPORT~1||
T(Not Support) PORT None ORT ORT. BTS
needs to be
(SRAN)$$
SUPPORT(Sup SUPPORT set to
(Support
port), , NOT_SUPP
SRAN)**
O&M of Enumeration NOT_SUPPOR NOT_SUP ORT(Not
NOT_SUPPOR
BTS Type T(Not Support) PORT None None Support). BTS
T(Support
SRAN)** SUPPORT
NOT_SUPPOR ,
O&M of Enumeration T~0||()$$ NOT_SUP NOT_SUPP NOT_SUPP
BTS Type (Not Support) PORT None ORT ORT BTS
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~2047 0~2047 None None None Cell
Configurati
on
Manageme 1~64
nt String Type None characters None None None Cell
Configurati
on
Manageme
nt Interval Type 0~2047 0~2047 None None None Cell
Configurati
on
Manageme 1~64
nt String Type None characters None None None Cell
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None None None Cell
O&M of 1~100
BSC String Type None characters None None None BSC6900
BSC/RNC
Clock Interval Type 1~4 1~4 None None None None
BSC/RNC
HOALGORITH
Clock Interval Type 1~4 1~4 None None None None
M1(Handover
HUAWEI I algorithm I), HOALGO
Handover HOALGORITH RITHM1,
HUAWEI II Enumeration M2(Handover HOALGO HOALGORIT HOALGORI
Handover Type algorithm II) RITHM2 None HM1 THM1 Cell
IP Fault
Detection 0.0.0.0~25 Current
Based on IP Address 5.255.255. BFD
BFD Type None 255 None None None session
Configurati
on
Manageme 1~65533,
nt Interval Type 1~65533,65535 65535 None None None Cell
Configurati
on
Manageme 1~3
nt String Type None characters None None None Cell
Building
Integrated
TS1, TS2,
Timing Supply
TS3, TS4,
system 2),
TS5, TS6,
8KHZ(8KHZ),
TS7, TS8,
GPS(Globe
TS9,
Positioning BITS1-
TS10,
System), 2MHZ,
TS11,
LINE1_8KHZ(8 BITS2-
TS12, Ethernet
KHZ line1), 2MHZ,
None Interval Type 1~1000 TS13,
1~1000 None None None port
LINE2_8KHZ(8 BITS1-
TS14,
Configurati KHZ line2), 2MBPS,
TS15,
on BITS1- BITS2-
TS16,
Manageme T1BPS(T1BPS 2MBPS,
1~3
TS17,
nt String Type Building
None GPS,
characters None None None Cell
TS1, TS2, TS3, TS18,
Integrated 8KHZ,
TS4, TS5, TS6, TS19,
Timing Supply LINE1_8K
TS7, TS8, TS9, TS20,
system 1), HZ,
TS10, TS11, TS21,
BITS2- LINE2_8K LINE1_8K
None Interval Type TS12,
0~335 TS13, TS22,
0~335 None None None E1/T1 port
T1BPS(T1BPS HZ, and
TS14, TS15, TS23,
Building BITS1- LINE2_8K
TS16, TS17, TS24,
Integrated T1BPS, are most
TS18, TS19, TS25,
BSC/RNC Enumeration Timing Supply BITS2- commonly
TS20, TS21, TS26,
Clock Type system 2) T1BPS None None used. None
TS22, TS23, TS27,
TS24, TS25, TS28,
TS26, TS27, TS29,
TS28, TS29, TS30,
None Bit Field Type TS30, TS31 TS31 None None None E1/T1 port
Configurati
on
Manageme
nt Interval Type 0~11 0~11 None None None None
Configurati
on
Manageme
nt Interval Type 1~11 1~11 None None None None
None Interval Type 0~11 0~11 None None None E1/T1 link
MBSC
Load
Balancing Interval Type 0~11 0~11 None None None BSC
O&M of
BTS Interval Type 0~254 0~254 None None None BTS
IP Fault
Detection
Based on
BFD Interval Type 0~254 0~254 None 0 0 BTS
Configurati
on
Manageme
nt Interval Type 0~11 0~11 None None None BSC
O&M of
BSC Interval Type 0~11 0~11 None None None BSC
O&M of
BTS Interval Type 0~254 0~254 None None None BTS
O&M of
BTS Interval Type 0~11 0~11 None None None BTS
O&M of Control
BSC Interval Type 0~11 0~11 None None None plane link
O&M of
BSC Interval Type 0~11 0~11 None None None BSC6900
Configurati
on
Manageme 1~249
nt String Type None characters None None None None
O&M of
BTS Interval Type 0~5 0~5 None None None None
Faulty
Manageme Enumeration DES(Descent),
nt Type ASC(Ascent) DES, ASC None DES None BSC6900
GSM_PRIOR(G
Gb over IP Interval Type 0~255 0~255 None 100 100 NSE
SM Traffic
Prior), GSM_PRI
CSVOICE(CS
UMTS_PRIOR( OR,
Voice),
O&M of Enumeration UMTS Traffic UMTS_PR GSM_PRIO
CSDATA(CS CSVOICE,
BTS Type Prior) IOR None GSM_PRIOR R BTS
Data), CSDATA,
PSHIGHPRI(P PSHIGHP
S High PRI), RI,
Enumeration PSLOWPRI(PS PSLOWP
IP QOS Type Low PRI) RI None None None BTS
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~63 0~63 dB 63 63 Cell
Faulty
Manageme
nt Interval Type 20~99 20~99 per cent 75 75 Board
Faulty
Manageme
nt Interval Type 30~100 30~100 per cent 85 85 Board
Faulty
Manageme
nt Interval Type 20~99 20~99 per cent 80 80 Board
Faulty
Manageme
TCH:480~
nt Interval Type 30~100 30~100 per cent 85 80 Board
15360,
HUAWEI I step:480;
Handover SDCCH:4
HUAWEI II 70~15040,
TCH:480~
Handover Interval Type 1~32 step:470 ms 6 6 Cell
15360,
HUAWEI I step:480;
Handover SDCCH:4
HUAWEI II 70~15040,
Handover Interval Type 1~32 step:470 ms 2 2 Cell
Configurati
on
Manageme
nt Interval Type 0~7 0~7 None None None None
MBSC
Load
Balancing Interval Type 0~7 0~7 None None None BSC
Faulty
Manageme 1~214748
nt Interval Type 1~2147483646 3646 None None None BSC6900
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~63 0~63 dB 63 63 Cell
Configurati
on
Manageme Compound HOUR, MIN, HOUR,
nt Type SEC MIN, SEC None None None BSC6900
O&M of 2000-1-1
BSC 00:00:00~
Security year, month, 2037-12-
Manageme Compound date, hour, min, 31
nt Type sec 23:59:59 None None None BSC6900
Faulty
Manageme Compound 00:00:00~
nt Type hour, min, sec 23:59:59 None None None BSC6900
Faulty
Manageme Compound 00:00:00~
nt Type hour, min, sec 23:59:59 None None None BSC6900
1970-1-1
00:00:00~
Simplified year, month, 2538-12-
Cell Compound day, hour, min, 31
Broadcast Type sec 23:59:59 None None None Cell
Faulty
Manageme
Frequency
nt Interval Type 1~65535 1~65535 None None None BSC6900
Hopping
(RF
hopping,
baseband Enumeration NO(No),
hopping) Type YES(Yes) NO, YES None YES YES BSC
O&M of
BSC Interval Type 0~65535 0~65535 None None None PBCIC
TRX Power
Amplifier JAN(Jan.),
Intelligent FEB(Feb.),
Shutdown Interval Type MAR(Mar.),
1~31 1~31 None None None BSC
APR(Apr.),
MAY(May),
JUN(Jun.), JAN, FEB,
O&M of -99.0~40.0 degree
JUL(Jul.), MAR,
BTS Interval Type -990~400 (step: 0.1) Celsius -100 -100 BTS
AUG(Aug.), APR, MAY,
TRX Power SEP(Sep), JUN, JUL,
Amplifier OCT(Oct.), AUG, SEP,
Intelligent Enumeration NOV(Nov.), OCT, NOV,
Shutdown Type DEC(Dec) DEC None None None BSC
Group Call
Reliability
Enhancing Interval Type 60~600 60~600 s 240 240 BTS
TRX Power
Amplifier
Intelligent Compound 00:00~23:
Shutdown Type hour, min 59 None None None BSC
Ater
Interface
4:1
Multiplexing Interval Type 8~255 8~255 None None None E1/T1 link
A Interface
Circuit
Manageme 1~31,
nt Interval Type 1~31 step:8 None None None E1/T1 link
O&M of
BTS Interval Type 1~31 1~31 None None None BTS
DISABLED(Dis
abled), DISABLE
O&M of Enumeration ENABLED(Ena D,
BTS Type bled) ENABLED None ENABLED ENABLED BTS
DISABLED(Dis
abled), DISABLE
O&M of Enumeration ENABLED(Ena D,
BTS Type bled) ENABLED None DISABLED DISABLED BTS
A Interface
Circuit
Manageme
nt Interval Type 0~65535 0~65535 None None None E1/T1 link
O&M of
BTS Interval Type 0~62 0~62 None None None BTS
O&M of
BSC
Security 2000-1-
Manageme Compound year, month, 1~2037-
2G/3G
nt Type day 12-31 None None None BSC6900
Neighborin
g Cell
Automatic
Optimizatio
n Interval Type 1~32 1~32 None None None BSC
A Interface
Protocol Enumeration NO(NO),
Process Type YES(YES) NO, YES None NO NO MTP3 link
Enumeration NO(No),
EICC Type YES(Yes) NO, YES None NO NO Cell
Encrypted
Network
Manageme Enumeration OFF(Off),
nt Type ON(On) OFF, ON None OFF OFF Cell
Group Call
Reliability
Enhancing Interval Type 60~300 60~300 s 120 120 BTS
A Interface
Protocol Enumeration OFF(OFF),
Process Type ON(ON) OFF, ON None OFF OFF SCCP
Semi-
Permanent
HOUR{0~
Connection Interval Type 0~23 0~23 None None None BTS
23},
MIN{0~59}
Cell ,
Frequency Compound SEC{0~59
Scan Type hour, min, sec } None None None Cell
O&M of
BTS Interval Type 0~23 0~23 None None None BTS
O&M of
BTS Interval Type 0~254 0~254 None None None BTS
O&M of
BTS Interval Type 0~7 0~7 None None None BTS
O&M of
BSC
Security
Manageme Compound 00:00:00~
nt Type hour, min, sec 23:59:59 None None None BSC6900
DBS3036(DBS BTS3012_
3036), II,
BTS3036(BTS3 BTS3900_
036), GSM,
BTS3036A(BTS BTS3900A
3036A), _GSM,
BTS3900L_GS BTS3036,
M(BTS3900L BTS3036A
GSM), ,
O&M of
BTS3900B_GS BTS3900L
BTS Interval Type 1~31 1~31 None None None BTS
M(BTS3900B _GSM,
GSM), BTS3900B
BTS3900E_GS _GSM,
O&M of Enumeration M(BTS3900E BTS3900E
BTS Type GSM) _GSM None None None BTS
TC Pool Interval Type 1~15 1~15 None None None E1/T1 link
TC Pool Interval Type 1~15 1~15 None None None E1/T1 link
O&M of 1~64
BTS String Type None characters None None None None
Abis MUX
UDP MUX
for A
Transmissio
n Interval Type 16~1023 16~1023 byte 352 352 None
Abis MUX Interval Type 16~1023 16~1023 byte 352 352 BTS
O&M of
BSC Interval Type 1~50 1~50 None None None BSC6900
1~124,
None Interval Type 1~124,128~189 128~189 None None None BSC6900
Enumeration NO(No),
Flex Abis Type YES(Yes) NO, YES None NO NO Cell
Enumeration NO(NO),
Flex Abis Type YES(YES) NO, YES None NO NO BTS
Simplified
Cell Enumeration NO(No),
Broadcast Type YES(Yes) NO, YES None NO NO Cell
NOTSUPPORT
MS High (Not Support), NOTSUPP
multislot Enumeration SUPPORT(Sup ORT, NOTSUPPO NOTSUPPO
classes Type port) SUPPORT None RT RT BSC
UNSUPPORT(
Not Support), UNSUPP
Enumeration SUPPORT(Sup ORT, UNSUPPOR
DTM Type port) SUPPORT None T None Cell
Extended NOTSUPPORT
Dynamic (Not Support), NOTSUPP
Allocation(E Enumeration SUPPORT(Sup ORT, NOTSUPPO NOTSUPPO
DA) Type port) SUPPORT None RT RT BSC
UNSUPPORT(
Not Support), UNSUPP
Enumeration SUPPORT(Sup ORT, UNSUPPOR
DTM Type port) SUPPORT None T None Cell
NO(Not
Enumeration Support),
MBSC
TFO Type YES(Support) NO, YES None NO NO BSC
Handover
based on
Load NO(No
Enhanceme Enumeration Support),
nt Type YES(Support) NO, YES None NO NO BSC
T_12(12), T_12,
T_15(15), T_15,
T_20(20), T_20,
T_30(30), T_30,
T_41(41), T_41,
T_55(55), T_55,
T_76(76), T_76,
T_109(109), T_109,
Enumeration T_163(163), T_163,
Access Type T_217(217) T_217 None T_20 T_20 Cell
0.0.0.0~25
IP Address 5.255.255.
Gb over IP Type None 255 None None None NSE
Faulty CLOSE(CLOSE
Manageme Enumeration ), CLOSE,
nt Type OPEN(OPEN) OPEN None CLOSE None None
O&M of Enumeration
BSC Type ON, OFF ON, OFF None None None BSC6900
SUN(Sunday),
MON(Monday),
O&M of Enumeration CLOSE(Close), CLOSE,
TUE(Tuesday), SUN,
BTS Type OPEN(Open) OPEN None None None BTS
WED(Wednesd MON,
Configurati ay), TUE,
on THU(Thursday), WED,
Manageme Enumeration FRI(Friday), THU, FRI,
nt Type SAT(Saturday) SAT None None None BSC6900
Configurati
on
Manageme Enumeration CLOSE,
nt Type CLOSE, OPEN OPEN None None None None
Enumeration ON(ON),
None Type OFF(OFF) ON, OFF None None None BSC6900
License
Manageme Enumeration ON(ON),
nt Type OFF(OFF) ON, OFF None None None BSC6900
IP Fault
Detection
Based on Enumeration BFD_OFF(OFF BFD_OFF,
BFD Type ), BFD_ON(ON) BFD_ON None None None None
O&M of Enumeration NO(NO),
BTS Type YES(YES) NO, YES None None None BTS
AMR FR
AMR HR Enumeration CLOSE(Close), CLOSE,
TFO Type OPEN(Open) OPEN None None CLOSE BTS
Enumeration NO(NO),
A over IP Type YES(YES) NO, YES None YES YES SCTP link
O&M of 0~429496
BSC Interval Type 0~4294967295 7295 None 0 0 BSC6900
O&M of 0~429496
BSC Interval Type 0~4294967295 7295 None 0 0 BSC6900
O&M of 0~429496
BSC Interval Type 0~4294967295 7295 None 0 0 BSC6900
O&M of 0~429496
BSC Interval Type 0~4294967295 7295 None 0 0 BSC6900
O&M of
BTS Interval Type 3~5 3~5 None None None BTS
O&M of
BSC
Security
Manageme Enumeration OFF(Off),
FIRST(First),
nt Type ON(On) OFF, ON None ON None BSC6900
SECOND(Seco FIRST,
Configurati nd), SECOND,
on THIRD(Third), THIRD,
Manageme Enumeration FOURTH(Fourt FOURTH,
nt Type h), LAST(Last) LAST None None None BSC6900
Soft-
Synchroniz
ed Network Interval Type 0~2500 0~2500 None 0 None BSC6900
GSM/TD- SyncCase1(Sy SyncCase
SCDMA nc case 1), 1,
Interoperabi Enumeration SyncCase2(Sy SyncCase
AISS(Air
lity Type nc case 2) 2 None None None Cell
IBCA Interface
(Interferenc Software Sync),
e Based GPS(GPS
Channel Enumeration Synchronization AISS,
Allocation) Type ) GPS None AISS AISS BTS
BSC/RNC
Software
Manageme Enumeration TRUE,
CONSYN(Cons
nt Type TRUE, FALSE FALSE None None None None
ecutive
Synchronizing),
INTERSYN(Inte CONSYN,
Clock over Enumeration rmittent INTERSY
IP Type Synchronizing) N None None None BTS
Clock over
IP Interval Type 1~7 1~7 d 1 1 BTS
Clock over
IP Interval Type 0~23 0~23 h 2 2 BTS
Clock over
IP Interval Type 0~59 0~59 min 0 0 BTS
Configurati
on
Manageme 1~250
nt String Type None characters None None None None
Configurati
on
Manageme 1~250
nt String Type None characters None MBSC None None
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0,8~11 0, 8~11 None 10 10 Cell
Configurati
on
Manageme 1~250
nt String Type None characters None None None None
Public
Voice
Group Call Enumeration NO(No),
Service Type YES(Yes) NO, YES None YES YES BSC
Configurati
on
Manageme 1~250
nt String Type None characters None None None None
Configurati
on
Manageme 1~250
nt String Type None characters None None None None
Gb
Interface 1000~300
Function Interval Type 1000~30000 00 ms 3000 3000 BSC
Abis over
IP Interval Type 1~60 1~60 s 5 5 None
A Interface
Protocol 30000~60
Process Interval Type 30000~60000 000 ms 60000 60000 MTP3 link
A Interface
Protocol
Process Interval Type 800~1500 800~1500 ms 1500 1500 MTP3 link
"Ring II Wait
Time Before
Switch" = 0;
"Ring II Try
Rotating
Duration
Time" = 60;
"Ring II
A Interface Rotating
Protocol Penalty
Process Interval Type 800~1500 800~1500 ms 1500 Time" = 1500
0; MTP3 link
"T200" = 12;
"T203" = 1;
A Interface and "N200"
Protocol 2000~300 = 3.
Process Interval Type 2000~3000 0 ms 3000 When the 3000 MTP3 link
transmission
A Interface quality is
Protocol bad, the
Process Interval Type 800~1500 800~1500 ms 1500 recommend1500 MTP3 link
ed settings
are as
A Interface follows:
Protocol "Ring II Wait
Process Interval Type 800~1200 800~1200 ms 1200 1200
Time Before MTP3 link
Switch" =
Gb 30; "Ring II
Interface 1000~120 Try Rotating
Function Interval Type 1000~120000 000 ms 3000 Duration3000 BSC
Time" = 60;
"Ring II
Rotating
Abis over
Penalty
IP Interval Type 1~60 1~60 s 5 5 None
Time" = 0;
"T200" = 24;
"T203" = 3;
Ring 60~2400 and "N200"
Topology Interval Type 6~240 (step: 10) ms 12 = 3. BTS
Radio Link
Manageme 5~1275,
nt Interval Type 1~255 step: 5 ms 50 50 Cell
Radio Link
Manageme 5~1275,
nt Interval Type 1~255 step: 5 ms 50 50 Cell
Radio Link
Manageme 10~2550,
nt Interval Type 1~255 step: 10 ms 200 200 Cell
Radio Link
Manageme 10~2550,
nt Interval Type 1~255 step: 10 ms 60 60 Cell
Radio Link
Manageme 10~2550,
nt Interval Type 1~255 step: 10 ms 150 150 Cell
bad, the
recommend
ed settings
are as
follows:
"Ring II Wait
Time Before
Switch" =
Radio Link 30; "Ring II
Manageme 5~1275, Try Rotating
nt Interval Type 1~255 step: 5 ms 60 Duration 60 Cell
Time" = 60;
"Ring II
Radio Link
Rotating
Manageme 5~1275,
Penalty
nt Interval Type 1~255 step: 5 ms 60 60 Cell
Time" = 0;
"T200" = 24;
Fast Ring "T203" = 3;
Network and "N200"
Switch Interval Type 1~10 1~10 s 1 = 3. BTS
A Interface
Protocol 180000~36000 180000~3
Process Interval Type 0 60000 ms 360000 360000 MTP3 link
A Interface
Protocol 180000~36000 180000~3
Process Interval Type 0 60000 ms 360000 360000 MTP3 link
A Interface
Protocol 1400~200
Process Interval Type 1400~2000 0 ms 2000 2000 MTP3 link
Gb
Interface 1000~100
Function Interval Type 1000~10000 00 ms 10000 10000 BSC
Gb Over
FR Interval Type 5~30 5~30 s 10 10 BC
A Interface
Protocol
Process Interval Type 800~1200 800~1200 ms 1200 1200 MTP3 link
Gb
Interface 1000~100
Function Interval Type 1000~10000 00 ms 5000 5000 BSC
A Interface
Protocol
Process Interval Type 800~1200 800~1200 ms 1200 1200 MTP3 link
Gb
Interface 1000~300
Function Interval Type 1000~30000 00 ms 1000 1000 BSC
A Interface
Protocol
Process Interval Type 800~1200 800~1200 ms 1200 1200 MTP3 link
Gb
Interface 1000~100
Function Interval Type 1000~10000 00 ms 3000 3000 BSC
Gb
Interface 1000~100
Function Interval Type 1000~10000 00 ms 3000 3000 BSC
A Interface
Protocol
TCH:480~
Process Interval Type 800~1200 800~1200 ms 1200 1200 MTP3 link
14880,
HUAWEI I step:480;
Handover SDCCH:4
HUAWEI II 70~14570,
Handover Interval Type 1~31 step:470 ms 4 4 Cell
Concentric
Cell Interval Type 0~255 0~255 bit 0 0 Cell
HUAWEI II 0.5~8,
Handover Interval Type 1~16 step:0.5 s 1 1 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~255 0~255 bit 255 255 Cell
Talker
Identificatio
TCH:480~
n Interval Type 0~255 0~255 s 0 0 Cell
14880,
HUAWEI I step:480;
Handover SDCCH:4
HUAWEI II 70~14570,
Handover Interval Type 1~31 step:470 ms 2 2 Cell
Soft-
Synchroniz
ed Network Interval Type 0~7 0~7 None None None BSC6900
HUAWEI II 0.5~0.8,
Handover Interval Type 1~16 step:0.5 s 1 1 Cell
Concentric
Cell Interval Type 0~255 0~255 bit 63 63 Cell
Power
Control Interval Type 0~25 0~25 None 10 10 Cell
Power
Control Interval Type 0~25 0~25 None 10 10 Cell
O&M of
BSC Interval Type 1~12 1~12 None None None BSC6900
O&M of
BTS Interval Type 1~12 1~12 None None None None
OML
Backup Interval Type 30~300 30~300 s 90 90 BTS
Ring
Topology Interval Type 60~300 60~300 s 90 90 BTS
A Interface
Protocol
Process Interval Type 1~254 1~254 None 170 170 MTP3 link
Gb
Interface 1000~100
Function Interval Type 1000~10000 00 ms 4000 4000 BSC
O&M of
BTS Interval Type 0~500 0~500 mV 80 80 BTS
Concentric
Cell Interval Type 0~100 0~100 per cent 60 60 Cell
SEPERATE_P
RINCIPAL(Princ
Concentric ipal BSC), SEPERAT
Cell Interval Type SEPERATE_S
0~100 E_PRINCI
0~100 per cent 70 70 Cell
UBORDINATE( PAL,
Subordinate SEPERAT
A Interface
BSC), E_SUBOR
Protocol
TOGETHER(B DINATE,
Process Interval Type 1~15 1~15 None 10 10 MTP3 link
SC/TC TOGETHE
Together), R,
A Interface SEPERATE_BS SEPERAT
Protocol Enumeration C_INTERFACE E_BSC_IN
Process Type (BSC Interface) TERFACE None None None MTP3 link
DISABLE(DISA
BLE),
O&M of Enumeration ENABLE(ENAB DISABLE,
BSC Type LE) ENABLE None None DISABLE Cell
O&M of
BTS Interval Type 0~62 0~62 None None None BTS
Control
None Interval Type 0~335 0~335 None None None plane link
Control
None Interval Type 0~5,8~27 0~5, 8~27 None None None plane link
Control
None Interval Type 0~11 0~11 None None None plane link
Configurati
on GTC(GTC),
Manageme Enumeration UTC(UTC), GTC,
nt Type ITC(ITC) UTC, ITC None None None None
GSM/TD-
SCDMA AUTO(Auto),
Interoperabi Enumeration Manual(Manual AUTO,
lity Type ) Manual None None None Cell
Configurati
on AUTO(Auto),
Manageme Enumeration Manual(Manual AUTO,
nt Type ) Manual None None None Cell
GSM/TD-
SCDMA
Interoperabi 0~42,
lity Interval Type 0~7 step: 6 dB 0 0 Cell
GSM/TD- Negative
SCDMA infinity,
Interoperabi -28~28,
lity Interval Type 0~15 step: 4 dB 8 8 Cell
GSM/TD- 0~36,
SCDMA Positive
Interoperabi infinity,
lity Interval Type 0~7 step: 6 dB 0 0 Cell
GSM/TD-
SCDMA
Interoperabi
lity Interval Type 0~1 0~1 None 0 None Cell
GSM/TD-
SCDMA
Interoperabi
lity Interval Type 0~16383 0~16383 None 0 0 Cell
GSM/TD-
SCDMA
Interoperabi Enumeration NO(No),
lity Type YES(Yes) NO, YES None NO NO Cell
GSM/TD-
SCDMA
Interoperabi Enumeration NO(No),
lity Type YES(Yes) NO, YES None NO NO Cell
GSM/TD-
SCDMA
Interoperabi
lity Interval Type 0~63 0~63 None 10 10 Cell
GSM/TD-
SCDMA
Interoperabi
lity Interval Type 0~127 0~127 None None None Cell
Configurati
on
Manageme
nt Interval Type 0~127 0~127 None None None Cell
GSM/TD-
SCDMA
Interoperabi Enumeration NO(No),
lity Type YES(Yes) NO, YES None NO NO Cell
GSM/TD-
SCDMA
Interoperabi
lity Interval Type 0~1 0~1 None None None Cell
O&M of Control
BSC Interval Type 0~5 0~5 None None None plane link
O&M of Control
BSC Interval Type 0~5 0~5 None None None plane link
O&M of
BSC Interval Type 0~127 0~127 None 63 63 PBSL
Faulty
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None OPEN None None
Faulty
Manageme 1~9 degree
nt String Type None characters Celsius 45 None None
Faulty
Manageme 1~9 degree
nt String Type None characters Celsius 0 None None
-
Faulty 50.0~100.
Manageme 0 (step: degree
nt Interval Type -500~1000 0.1) Celsius 500 500 BTS
-
Faulty 49.0~100.
Manageme 0 (step: degree
nt Interval Type -490~1000 0.1) Celsius 500 500 BTS
-
Faulty 50.0~100.
Manageme 0 (step: degree
nt Interval Type -500~1000 0.1) Celsius 0 0 BTS
Faulty
Manageme -50.0~99.0 degree
nt Interval Type -500~990 (step: 0.1) Celsius 0 0 BTS
O&M of 0.0~500.0
BTS Interval Type 0~5000 (step: 0.1) mV 800 800 BTS
Configurati
on
Manageme 1~64
nt String Type None characters None None None Cell
Configurati
on
Manageme
nt Interval Type 1~65535 1~65535 None None None None
Configurati
on
Manageme 32768~65
1~615
nt Interval Type 32768~65535 535
characters None None None None
Configurati (GB2312, For
on KOI8-R, EPS4815
Manageme KOI8-U,
1~64 boards, the
nt String Type None KOI8,
characters None None value
None of this None
WINDOW parameter is
S-1251, always "-1".
ASMO_44 For other
O&M of 9, degree
types of
BTS Interval Type 50~70 50~70
WINDOW Celsius 65 65 BTS
APMU
S-1256, boards, the
WINDOW recommend
O&M of S-874,
-40.0~0.0 degree ed value is
BTS Interval Type -400~0 WINDOW
(step: 0.1) Celsius -100 "-100". BTS
S-1253,
WINDOW
S-1254,
O&M of -40.0~0.0
WINDOW degree
BTS Interval Type -400~0 (step:
S-1255,0.1) Celsius -100 -100 BTS
WINDOW
System S-1257,
Information Enumeration NO(No), WINDOW
Sending Type YES(Yes) S-1250,
NO, YES None YES YES BSC
WINDOW
S-1252,
Gb
UCS2),
Interface
1~2462
Function Interval Type 1~255 1~255 s 30 30 BSC
characters
(BINARY),
Simplified 1~1395
Cell characters
Broadcast Any Type None (others) None None None Cell
Enumeration OFF(Off),
TFO Type ON(On) OFF, ON None OFF OFF Board
BTS Test
Function Interval Type 0~1023 0~1023 h None None None
Configurati
on
Manageme
nt Interval Type 0~65535 0~65535 None 65535 65535 Cell
ACTIVE(Active
OMU),
O&M of Enumeration STANDBY(Stan ACTIVE,
BSC Type dby OMU) STANDBY None None None BSC6900
None Interval Type 0~255 0~255 None None None BSC6900
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None BSC6900
0.0.0.0~25
IP Address 5.255.255.
None Type None 255 None None None BSC6900
None Interval Type 0~5,8~27 0~5, 8~27 None None None None
5000~600
GPRS Interval Type 5000~60000 00 ms 5000 5000 BSC
O&M of
BTS Interval Type 220~280 220~280 V 264 264 BTS
O&M of
BTS Interval Type 220~280 220~280 V 264 264 BTS
QoS
ARP&THP Interval Type 1~10 1~10 None 10 10 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 6 6 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 4 4 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 8 8 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 4 4 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 3 3 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 6 6 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 3 3 Cell
QoS
ARP&THP Interval Type 1~10 1~10 None 2 2 Cell
PERCENTAGE( PERCENT
Percentage), AGE,
Enumeration BANDWIDTH(B BANDWID
IP QOS Type and Width) TH None None None BSC6900
Cell
Frequency
Scan Interval Type 0,5~1440 0, 5~1440 min None None BTS
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~255 0~255 s 10 10 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~255 0~255 s 10 10 Cell
Concentric
Cell Interval Type 0~255 0~255 s 10 10 Cell
200~1000 Ethernet
None Interval Type 200~10000 0 ms 2000 2000 port
Ethernet
None Interval Type 1~10 1~10 s 2 2 port
1~20
Abis MUX Interval Type 1~20 (step: 1) ms 2 2 BTS
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~255 0~255 s 10 10 Cell
Ethernet
None Interval Type 1~1024 1~1024 None 4 4 port
Power
Optimizatio
n Based on NO(No),
Channel Enumeration YES(Yes), NO, YES,
Type Type NULL(Null) NULL None NO NO Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~255 0~255 s 30 30 Cell
Concentric
Cell Interval Type 10~255 10~255 s 40 40 Cell
Enhanced
Channel
Assignment
Algorithm Interval Type 1~30 1~30 s 8 8 Cell
0~429496 Subsyste
GPRS Interval Type 0~4294967295 7295 None None None m
If "APMU
Board Type"
is
"EPS4815",
the
recommend
ed value is
"0". For
O&M of degree
other types
BTS Interval Type -99~70 -99~70 Celsius 45 45 BTS
of APMU
boards, the
recommend
O&M of degree ed value is
BTS Interval Type -19~5 -19~5 Celsius -19 "-19". BTS
O&M of degree
BTS Interval Type -99~99 -99~99 Celsius -20 -20 BTS
Basic Cell
Re-
selection Interval Type 0~7 0~7 None 0 0 Cell
IP-Based
2G/3G Co-
Transmissio
n on Base
Station
IP-Based
Side Interval Type 0~62 0~62 None None None BTS
2G/3G Co-
Transmissio
n on Base
Station
IP-Based
Side Interval Type 0~23 0~23 None None None BTS
2G/3G Co-
Transmissio
n on Base
Station
Side Interval Type 0~254 0~254 None None None BTS
NORMAL(TXT
FORMAT),
O&M of Enumeration FORMAT(BIN NORMAL,
BSC Type FORMAT) FORMAT None None None BSC6900
O&M of
BTS Interval Type 0~5 0~5 None None None BTS
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 1~30 1~30 s 8 8 Cell
Flow
Control Interval Type 30~100 30~100 per cent 60 60 Board
Flow
Control Interval Type 30~100 30~100 per cent 60 67 Board
Flow
Control Interval Type 30~100 30~100 per cent 50 50 Board
Flow
Control Interval Type 30~100 30~100 per cent 50 62 Board
Flow Enumeration
Adaptive
Control Type ON, OFF ON, OFF None ON ON Board
Adjustment
of Uplink
and
Downlink
Channels Interval Type 1~255 1~255 None 5 5 BSC
Adaptive
Adjustment
of Uplink
M3UA_OVERR
and
IDE_MOD(Activ
Downlink
e/Standby M3UA_OV
Channels Interval TypeTER_TRANS(T
1~255 1~255 None 5 5 BSC
Mode), ERRIDE_
errestrial
M3UA_LOADS MOD,
Transmission),
HARE_MOD(Lo M3UA_LO M3UA_LOA M3UA_LOA
SAT_TRANS(S TER_TRA
Enumeration ad Sharing ADSHARE DSHARE_M DSHARE_M
atellite NS,
A over IP Type Mode) _MOD None OD OD SCCP
Transmission), SAT_TRA
Satellite TER_AND_SAT NS,
Transmissio _TRANS(Terres TER_AND
n over Abis Enumeration trial and _SAT_TR
Interface Type Satellite) ANS None None None BTS
O&M of
BSC Interval Type 0~27 0~27 None None None BSC
Enumeration
IP QOS Type IP(IP) IP None None None IP path
Enumeration IP(IP),
IP QOS Type HDLC(HDLC) IP, HDLC None None None BSC6900
IP(IP),
Enumeration HDLC(HDLC), IP, HDLC,
IP QOS Type TDM(TDM) TDM None None None BSC6900
0~7(FG2a)
,
Link
0~1(GOUa
aggregation Interval Type 0~5,8~27 0~5, 8~27 None None None BSC6900
),
0~11(FG2
c),
Link 0~3(GOUc Ethernet
aggregation Interval Type 0~11 ) None None None port
O&M of
BTS Interval Type 0~163 0~163 None None None BSC6900
IP logical
IP QOS Interval Type 0~199 0~199 None 2 2 port
TRXAid_NotAll IP logical
None Interval Type 0~11
ow(TRX Aiding 0~11 None None None port
IP Fault Not Allowed),
Detection AllowReForbid(
Based on Allowed &
BFD Interval Type Recover
0~11 0~11 None None None None
Forbidden),
AllowReImmed( TRXAid_N
Allowed & otAllow,
Ethernet Ethernet
Recover AllowReFo
OAM Interval Type 0~11 0~11 None None None port
Immediately), rbid,
AllowReCheck AllowReIm
TRX Res(Allowed & med,
Cooperatio Enumeration Recover When AllowReC AllowReChec AllowReChe
n Type Chk Res) heckRes None kRes ckRes Cell
BTS Test
Frequency
Function Interval Type 5~10 5~10 s None None None
Hopping
(RF
hopping,
baseband Physical
hopping) Interval Type 0~63,255 0~63, 255 None 255 255 channel
Configurati
on
Manageme
nt Interval Type 0~3071 0~3071 None None None TRX
Multi-site
Cell Interval Type 0~3071 0~3071 None None None BTS
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
Antenna
Frequency
Hopping Interval Type 0~3071 0~3071 None None None Cell
TS2(Time_slot_
2),
TS3(Time_slot_
3),
TS4(Time_slot_
Frequency 4),
Hopping TS5(Time_slot_
(RF 5),
hopping, TS6(Time_slot_
baseband 6), 1~120
hopping) String Type None
TS7(Time_slot_ characters None None None BSC
7),
TS8(Time_slot_
8),
BTS Test
Frequency TS9(Time_slot_
Function Interval Type 0~3071 0~3071 None None None None
Hopping 9),
(RF TS10(Time_slot
hopping, _10),
baseband TS11(Time_slot Physical
hopping) Interval Type 0~63
_11), 0~63 None None None channel
Configurati TS12(Time_slot
on _12),
Manageme TS13(Time_slot
nt Interval Type _13),
0~71 0~71 None None None TRX
TS14(Time_slot
_14),
TS15(Time_slot
O&M of _15),
BTS Interval Type 0~8
TS16(Time_slot 0~8 None None None BTS
_16),
TS17(Time_slot
O&M of _17),
BTS Interval Type TS18(Time_slot
0~7 0~7 None None None TRX
TRX(TRX),
_18), TS1, TS2,
TRU(TRU/DTR
TS19(Time_slot TS3, TS4,
U),
_19), TS5, TS6,
Multi-site QTRU(QTRU),
TS20(Time_slot TRX, TRU,
TS7, TS8,
Cell Interval Type DRRU(DRRU),
0~7
_20), QTRU,
0~7
TS9, None None None TRX
DRFU(DRFU),
TS21(Time_slot DRRU,
TS10,
Enhanced
MRRU(MRRU),
_21), DRFU,
TS11,
Channel
MRFU(MRFU),
TS22(Time_slot MRRU,
TS12,
Assignment Enumeration NO(No),
GRFU(GRFU),
_22), MRFU,
TS13,
Algorithm Type YES(Yes) NO, YES None YES YES Cell
GRRU(GRRU),
TS23(Time_slot GRFU,
TS14,
BTS3900B(BTS
_23), GRRU,
TS15,
3900B),
TS24(Time_slot BTS3900B
TS16,
O&M of Enumeration BTS3900E(BTS
_24), ,TS17,
BTS Type 3900E)
TS25(Time_slot BTS3900E
TS18, None None None TRX
Ater _25), TS19,
Interface TS26(Time_slot TS20,
4:1 _26), TS21,
Multiplexing Interval Type TS27(Time_slot
8~255 TS22,
8~255 None None None E1/T1 link
_27), TS23,
A Interface
TS28(Time_slot TS24,
Circuit
_28), TS25,
Manageme 1~31,
TS29(Time_slot TS26,
nt Interval Type 1~31 step:8 None None None E1/T1 link
_29), TS27,
TS30(Time_slot TS28,
_30), TS29,
Enumeration TS31(Time_slot TS30,
None Type _31) TS31 None None None Cell
TS10, TS11, TS12,
TS7, TS8,
TS12, TS13, TS13,
TS9,
TS14, TS15, TS1,
TS14,TS2,
TS10,
TS16, TS17, TS3,
TS15,TS4,
TS11,
TS18, TS19, TS5,
TS16,TS6,
TS12,
TS20, TS21, TS7,
TS17,TS8,
TS13,
TS1,
TS22,TS2, TS3,
TS23, TS9,
TS18,
TS14,
TS4,
TS24,TS5, TS6,
TS25, TS10,
TS19,
TS15,
TS7,
TS26,TS8, TS9,
TS27, TS11,
TS20,
TS16,
Gb Over TS10,
TS28, TS11,
TS29, TS12,
TS21,
2~429496
TS17,
FR Bit Field Type TS12,
TS30, TS13,
TS31 TS13,
TS22,
7294 None None None BC
TS1, TS2, TS3, TS18,
TS14, TS15, TS14,
TS23,
TS4, TS5, TS6, TS19,
TS16, TS17, TS15,
TS24,
TS7, TS8, TS9, TS20,
TS18, TS19, TS16,
TS25,
O&M of TS10, TS11, TS21,
TS20, TS21, TS17,
TS26,
BSC Interval Type TS12,
1~31 TS13, TS22,
1~31 None None None BTS
TS1,
TS22,TS2, TS3,
TS23, TS18,
TS27,
TS14, TS15, TS23,
Abis IP TS4, TS5, TS6,
TS24, TS25, TS19,
TS28,
TS16, TS17, TS24,
over E1/T1 TS7,
TS26,TS8, TS9,
TS27, TS20,
TS29,
TS18, TS19, TS25,
A IP over TS10,
TS28, TS11,
TS29, TS21,
TS30,
TS20, TS21, TS26,
E1/T1 Bit Field Type TS12,
TS30, TS13,
TS31 TS22,
TS31 None None None PPP link
TS22, TS23, TS27,
TS14, TS15, TS23,
Abis IP TS24, TS25, TS28,
TS16, TS17, TS24,
over E1/T1 TS26, TS27, TS29,
TS18, TS19, TS25,
A IP over TS28, TS29, TS30,
TS20, TS21, TS26,
E1/T1 Bit Field Type TS30, TS31 TS31 None None None MP link
TS22, TS23, TS27,
TS24, TS25, TS28,
TS26, TS27, TS29,
Abis IP TS28, TS29, TS30,
Frequency
over E1/T1 Bit Field Type TS30, TS31 TS31 None None None BTS
Hopping
(RF
hopping,
baseband
hopping) Interval Type 0~7 0~7 None None None Cell
Soft-
Synchroniz Enumeration NO(No),
ed Network Type YES(Yes) NO, YES None NO NO Cell
None Interval Type 0~65535 0~65535 None None None E1/T1 port
Semi-
Permanent
Connection Interval Type 0~127 0~127 None None None BTS
O&M of 1~50
BSC String Type None characters None None None BSC6900
TS10, TS11, TS21,
TS17,
TS12, TS13, TS22,
TS1, TS2, TS3, TS18,
TS14, TS15, TS23,
TS4, TS5, TS6, TS19,
TS16, TS17, TS24,
TS7, TS8, TS9, TS20,
TS18, TS19, TS25,
TS10, TS11, TS21,
TS20, TS21, TS26, If the board
TS12, TS13, TS22,
TS22, TS23, TS27, is configured
TS14, TS15, TS23,
Configurati TS24, TS25, TS28, with two to
TS16, TS17, TS24,
on TS26, TS27, TS29, four TRXs,
TS18, TS19, TS25,
Manageme TS28, TS29, TS30, the
IP-Based TS20, TS21, TS26,
nt Bit Field Type TS30, TS31 TS31 None None None
recommend None
2G/3G Co- TS22, TS23, TS27,
Transmissio TS24, TS25, TS28, ed value of
n on Base TS26, TS27, TS29, this
Station TS28, TS29, TS30, parameter is
Side Bit Field Type TS30, TS31 TS31 None None 20.
None BTS
If the board
is configured
with five
O&M of TRXs, the
BTS Interval Type 0~23 0~23 None None None
recommend BTS
ed value of
this
O&M of parameter is
BSC Interval Type 1~31 1~31 None None 50.
None PBSL
If the board
Enhanced
is configured
Channel
with six
Assignment Physical
TRXs, the
Algorithm Interval Type 0~7 0~7 None 0 0 channel
recommend
Enhanced ed value of
Channel this
Assignment parameter is
Adaptive
Algorithm Interval Type 0~50 0~50 W 20 48. TRX
Adjustment
of Uplink
and
Downlink
Adaptive
Channels Interval Type 0~65535 0~65535 ms 5000 5000 BSC
Adjustment
of Uplink
and
Downlink Enumeration Close(Close), Close,
Channels Type Open(Open) Open None Open Open BSC
8K(8K),
Semi- 16K(16K),
Permanent Enumeration 32K(32K), 8K, 16K,
Connection Type 64K(64K) 32K, 64K kbit/s None None BTS
TRXLOOPBAC
K(TRX
Loopback Test),
O&M of
CHLLOOPBAC TRXLOOP
BTS Interval Type 0~254 0~254 None None None BTS
K(Channel BACK,
Loopback Test), CHLLOOP
CHLCODEC(Sp BACK,
BTS Test Enumeration eech codec CHLCODE
Function Type Test) C None None None None
O&M of
BTS Interval Type 0~31 0~31 None None None None
SIMPLETEST( SIMPLET
Simple Test), EST,
BTS Test Enumeration MANUALTEST( MANUALT
TRX Power
Function Type Manual Test) EST None None None None
Amplifier
Intelligent
Shutdown
on Timeslot Enumeration NO(No),
Level Type YES(Yes) NO, YES None NO NO BSC
Ethernet
None Interval Type 1~255 1~255 None 64 64 port
Ethernet
None Interval Type 1~128 1~128 s 64 64 port
Dynamic
Cell Power
Off Interval Type 0~8 0~8 None 6 6 Cell
Dynamic
Cell Power Compound HOUR, 00:00~23:
Off Type MINUTE 59 None 0:00 None Cell
Dynamic
Cell Power Compound HOUR, 00:00~23:
DISABLE(Disab
Off Type MINUTE 59 None 0:00 None Cell
le),
ENABLE(Enabl DISABLE,
Dynamic e), ENABLE,
Cell Power Enumeration SLEEPING(Sle SLEEPIN
Off Type eping) G None None DISABLE Cell
Dynamic
Cell Power
Off Interval Type 0~100 0~100 per cent 80 80 Cell
O&M of degree
BTS Interval Type 40~79 40~79 Celsius 50 50 BTS
O&M of degree
BTS Interval Type -99~99 -99~99 Celsius 68 68 BTS
Soft-
Synchroniz
ed Network Interval Type 1~60 1~60 s 5 5 BSC6900
Soft-
Synchroniz
ed Network Interval Type 1~60 1~60 s 10 10 BSC6900
Soft-
Synchroniz
ed Network Interval Type 1~60 1~60 s 5 5 BSC6900
Soft-
Synchroniz
ed Network Interval Type 1~60 1~60 min 10 10 BSC6900
0~100
RAN (step:
Sharing Interval Type 0~10000 0.01) W 0 0 Board
0~100
RAN (step:
Sharing Interval Type 0~10000 0.01) W 0 0 Board
0~100
RAN (step:
Sharing Interval Type 0~10000 0.01) W 0 0 Board
0~100
RAN (step:
Sharing Interval Type 0~10000 0.01) W 0 0 Board
0~100
RAN (step:
Sharing Interval Type 0~10000 0.01) W 0 0 Board
0~100
RAN (step:
Sharing Interval Type 0~10000 0.01) W 0 0 Board
0~100
RAN (step:
Sharing Interval Type 0~10000 0.01) W 0 0 Board
0~100
RAN (step:
Sharing Interval Type 0~10000 0.01) W 0 0 Board
1~300000
IP QOS Interval Type 1~3000000 0 kbit/s None None IP path
Transmissi
T_2(2), T_3(3), T_2, T_3, on
T_4(4), T_5(5), T_4, T_5,
0~400000 resource
IP QOS Interval Type T_6(6), T_7(7),
0~4000000 T_6,
0 T_7, kbit/s None None group
T_8(8), T_9(9), T_8, T_9,
T_10(10), T_10,
T_12(12), T_12,
200~1000 Ethernet
T_14(14), T_14,
None Interval Type 200~10000 0 ms 500 500 port
T_16(16), T_16,
T_20(20), T_20,
T_25(25), T_25,
Enumeration T_32(32), T_32,
Access Type T_50(50) T_50 None T_20 T_20 Cell
Configurati
on
Manageme Enumeration
ANY_ERR_RE
nt Type EPS, TCS GSM900,
EPS, TCS None None None None
TURN(Stop at ANY_ERR
DCS1800,
Error), _RETURN
GSM900_
ALL_END_RET ,
GSM900, DCS1800,
O&M of Enumeration URN(Stop at ALL_END ANY_ERR_
DCS1800, GSM850,
BSC Type End) _RETURN None None RETURN BSC6900
GSM900_DCS PCS1900,
1800, GSM850, GSM850_
PCS1900, 1800,
Frequency Enumeration GSM850_1800, GSM850_
Band Type GSM850_1900 1900 None None None Cell
OUTER(Extern
al PCU),
Enumeration INNER(Built-in OUTER,
GPRS Type PCU) INNER None None None BSC
RFC-6(RFC-6), APM200,
BTS3900(BTS3 PS4890,
900), OMB,
BTS3900L(BTS RFC-6,
3900L), BTS3900,
Compact
BTS3900AL(BT BTS3900L
BTS
S3900AL), ,
Automatic GSM900, GSM900,
BTS3900AS(BT BTS3900A
Configurati DCS1800, DCS1800,
S3900AS), L,
on and Enumeration GSM850, GSM850,
BTS3900B(BTS BTS3900A
Planning Type PCS1900 PCS1900 None None None Cell
3900B), S,
BTS3900E(BTS BTS3900B
3900E), ,
O&M of Enumeration VIRTUAL(VIRT BTS3900E
BTS Type UAL) , VIRTUAL None None None BTS
GSM900(GSM9
00),
Frequency Enumeration DCS1800(DCS GSM900,
Band Type 1800) DCS1800 None None None Cell
O&M of
BTS Interval Type 0~15 0~15 None 0 0 BTS
O&M of
BTS Interval Type 0~1,255 0~1, 255 None None None BTS
O&M of
BTS Interval Type 0~23,255 0~23, 255 None None None BTS
O&M of
BTS Interval Type 0~53,255 0~53, 255 None None None BTS
O&M of
BTS Interval Type 0~15 0~15 None 0 0 BTS
O&M of
BTS Interval Type 0~23,255 0~23, 255 None None None BTS
O&M of
BTS Interval Type 0~53,255 0~53, 255 None None None BTS
Abis over
IP Interval Type 0~15 0~15 None 6 6 BSC
Abis over
IP Interval Type 0~15 0~15 None 0 0 BSC
Abis over
IP Interval Type 0~15 0~15 None 1 1 BSC
Abis over
IP Interval Type 0~15 0~15 None 1 1 BSC
Abis over
IP Interval Type 0~15 0~15 None 10 10 BSC
Abis over
IP Interval Type 0~15 0~15 None 3 3 BSC
Abis over
IP Interval Type 0~15 0~15 None 15 15 BSC
Abis over
IP Interval Type 0~15 0~15 None 5 5 BSC
Abis over
IP Interval Type 0~15 0~15 None 15 15 BSC
Abis over
IP Interval Type 0~15 0~15 None 13 13 BSC
Abis over
IP Interval Type 0~15 0~15 None 13 13 BSC
Enumeration OFF(Off),
A over IP Type ON(On) OFF, ON None OFF OFF MSC
Enhanced
Channel
Assignment Enumeration NO(No),
Algorithm Type YES(Yes) NO, YES None NO NO BSC
Abis over
IP Interval Type 0~15 0~15 None 6 6 BSC
Abis over
IP Interval Type 0~15 0~15 None 0 0 BSC
Abis over
IP Interval Type 0~15 0~15 None 1 1 BSC
Abis over
IP Interval Type 0~15 0~15 None 1 1 BSC
Abis over
IP Interval Type 0~15 0~15 None 10 10 BSC
Abis over
IP Interval Type 0~15 0~15 None 3 3 BSC
Abis over
IP Interval Type 0~15 0~15 None 15 15 BSC
Abis over
IP Interval Type 0~15 0~15 None 1 1 BSC
Abis over
IP Interval Type 0~15 0~15 None 15 15 BSC
Abis over
IP Interval Type 0~15 0~15 None 13 13 BSC
Abis over
IP Interval Type 0~15 0~15 None 13 13 BSC
Enumeration OFF(Off),
A over IP Type ON(On) OFF, ON None OFF OFF MSC
Abis MUX
UDP MUX NORTPC
for A OMP,
Transmissio Enumeration NORTPCOMP, RTPCOM
n Type RTPCOMP P None None None None
Abis MUX
UDP MUX NORTPC
1214~200
for A OMP,
1,
Transmissio Enumeration NORTPCOMP, RTPCOM
2005~378
n Type RTPCOMP P None None None None
3,
1214~2001,200 3786~478
5~3783,3786~4 3,
783,4785~6500 4785~650
Gb over IP Interval Type 0 00 None None None NSE
Administrators(
Administrator),
Operators(Oper Administra
Gb over IP Interval Type 0~65535 0~65535 None None None NSE
O&M of ator), tors,
BSC Users(User), Operators,
Security Guests(Guest), Users,
Manageme Enumeration Customs(Custo Guests,
nt Type m) Customs None Guests Guests BSC6900
Public
Voice
O&M of
Group Call
BTS Interval Type 0~99 0~99 None 80 80 BTS
Service
Public
Voice
Broadcast
Service Interval Type 0~64 0~64 None 64 64 Cell
Faulty
TCH:480~
Manageme 1~8
122400,
nt String Type None characters None None None BTS
step:480;
HUAWEI III SDCCH:4
Power 70~11985
Control 0,
Algorithm Interval Type 0~255 step:470 ms 3 3 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 14 14 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 14 14 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 16 16 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 16 16 Cell
HUAWEI II 0.5~4,
Handover Interval Type 1~8 step:0.5 s 1 1 Cell
In Abis over
TDM
HUAWEI II 0.5~4, transmission
Adaptive
Handover Interval Type 1~8 step:0.5 s 1 , the 1 Cell
Adjustment
recommend
of Uplink
ed value is
and
180; in Abis
Downlink
over IP
Channels Interval Type 1~255 1~255 None 5 5 BSC
transmission
, the
recommend
O&M of ed value is
BSC Interval Type 0~240 0~240 ms 180 200. Cell
MBSC
Load
TCH:480~
Balancing Interval Type 1~100 1~100 None 90 90 BSC
9600,
Enhanced step:480;
Power SDCCH:4
Control 70~9400,
Algorithm Interval Type 1~20 step:470 ms 5 5 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 6 6 Cell
HUAWEI III
Power
Control
Algorithm Interval Type 1~30 1~30 dB 8 8 Cell
MBSC
Load
Balancing Interval Type 1~100 1~100 None 100 100 BSC
Enhanced
Power
Control
Algorithm Interval Type 0~3 0~3 None 0 0 Cell
Enhanced
Power
Control
Algorithm Interval Type 0~7 0~7 None 0 0 Cell
Enhanced
Power
Control
Algorithm Interval Type 0~7 0~7 None 3 3 Cell
TCH:480~
9600,
Enhanced step:480;
Power SDCCH:4
Control 70~9400,
Algorithm Interval Type 1~20 step:470 ms 5 5 Cell
Enhanced
Power
Control
Algorithm Interval Type 0~7 0~7 None 3 3 Cell
Enhanced
Power
Control
Algorithm Interval Type 0~63 0~63 dB 5 5 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 55 55 Cell
NO(Not
O&M of Enumeration Allowed),
BSC Type YES(Allowed) NO, YES None NO NO Cell
It is
HUAWEI I
recommend
Handover
ed that the
HUAWEI II
GSM_PHASE_ GSM_PHA value of this
Handover Interval Type 0~255 0~255 s 10 10 Cell
1, SE_1, parameter is
Configurati GSM_PHASE_ GSM_PHA the same as
on 2, SE_2, that for "A
Manageme Enumeration GSM_PHASE_ GSM_PHA GSM_PHAS Interface
nt Type 2Plus SE_2Plus None E_2 Tag". BSC
Enumeration NO(NO),
None Type YES(YES) NO, YES None None None E1/T1 port
Gb Over
FR Interval Type 1~6 1~6 None 3 3 BSC
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 40 40 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 40 40 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 40 40 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 60 60 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 60 60 BTS
Faulty
Manageme
nt Interval Type 10~3500 10~3500 mA 60 60 BTS
O&M of
BTS Interval Type 0~2047 0~2047 None None None BTS
O&M of
BTS Interval Type 0~2047 0~2047 None None None BTS
BYNAME(By
O&M of Enumeration Name), BYNAME,
BTS Type BYID(By Index) BYID None None None BTS
BYNAME(By
O&M of Enumeration Name), BYNAME,
BTS Type BYID(By Index) BYID None None None BTS
O&M of 1~64
BTS String Type None characters None None None BTS
O&M of 1~64
BTS String Type None characters None None None BTS
Simplified
Cell
Broadcast Interval Type 0~15 0~15 None None None Cell
MCS1(MCS1), MCS1,
CS1(CS1),
MCS2(MCS2), MCS2,
CS2(CS2),
MCS3(MCS3), MCS3,
Coding Enumeration CS3(CS3), CS1, CS2,
MCS4(MCS4), MCS4,
Scheme Type CS4(CS4) CS3, CS4 None CS1 CS1 Cell
MCS5(MCS5), MCS5,
MCS6(MCS6), MCS6,
MCS7(MCS7), MCS7,
Enumeration MCS8(MCS8), MCS8,
EGPRS Type MCS9(MCS9) MCS9 None MCS2 MCS2 Cell
MCS1(MCS1),
MCS2(MCS2), MCS1,
MCS3(MCS3), MCS2,
MCS1(MCS1),
MCS4(MCS4), MCS3,
MCS2(MCS2),
MCS5(MCS5), MCS4,
PDCH MCS3(MCS3), MCS1,
MCS6(MCS6), MCS5,
Dynamic MCS4(MCS4), MCS2,
UAS7(UAS7), MCS6,
Adjustment Interval Type MCS5(MCS5),
10~70 MCS3,
10~70 None 20 20 Cell
UAS8(UAS8), UAS7,
MCS6(MCS6), MCS4,
UAS9(UAS9), UAS8,
UAS7(UAS7), MCS5,
UAS10(UAS10) UAS9,
UAS8(UAS8), MCS6,
Uplink Enumeration , UAS10,
UAS9(UAS9), UAS7,
EGPRS2-A Type UAS11(UAS11) UAS11 None MCS6 MCS6 Cell
UAS10(UAS10) UAS8,
, UAS9,
UAS11(UAS11), UAS10,
Uplink Enumeration UNFIXED(UNFI UAS11,
EGPRS2-A Type XED) UNFIXED None UNFIXED UNFIXED Cell
Extended MCS1(MCS1),
CS1(CS1),
Uplink TBF Interval Type MCS2(MCS2),
0~5000 MCS1,
0~5000 ms 2000 2000 Cell
CS2(CS2),
MCS3(MCS3), MCS2,
CS3(CS3),
MCS4(MCS4), MCS3,
CS4(CS4), CS1, CS2,
MCS5(MCS5), MCS4,
Coding Enumeration UNFIXED(UNFI CS3, CS4,
MCS6(MCS6), MCS5,
Scheme Type XED) UNFIXED None UNFIXED UNFIXED Cell
MCS7(MCS7), MCS6,
MCS8(MCS8), MCS7,
MCS9(MCS9), MCS8,
Enumeration UNFIXED(UNFI MCS9,
EGPRS Type XED) UNFIXED None UNFIXED UNFIXED Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~70 0~70 None 40 40 Cell
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 0~63 0~63 dB 30 30 Cell
Group Call
Reliability
Enhancing Interval Type 10~255 10~255 s 30 30 BTS
Enhanced
Power
Abis over
Control
IP Interval Type 0~96 0~96 None None None BTS
Algorithm
HUAWEI III
Power
Control Enumeration NO(No),
Algorithm Type YES(Yes) NO, YES None YES YES Cell
Transmissi
on
resource
IP QOS Interval Type 0~2047 0~2047 None None None group
None Interval Type 512~1535 512~1535 None None None None
HUAWEI I
Handover
HUAWEI II
Handover Interval Type 1~16 1~16 s 4 4 Cell
HUAWEI I
Handover
HUAWEI II 0.1~1,
Handover Interval Type 1~10 step:0.1 None 6 6 Cell
HUAWEI I
Handover
HUAWEI II
Point To
Handover Interval Type 1~16 1~16 s 5 5 Cell
Point Short
Message
Service
(TS21, Enumeration NO(No),
TS22) Type YES(Yes) NO, YES None NO NO Cell
Extended
Uplink TBF Interval Type 0~300 0~300 ms 120 120 Cell
Coding
Scheme Interval Type 0~64 0~64 per cent 10 10 Cell
Coding
Scheme Interval Type 0~64 0~64 per cent 5 5 Cell
O&M of 1~32
BTS String Type None characters None None None None
HOUR
0~23
O&M of Compound HOUR, MINUTE
BTS Type MINUTE 0~59 None None None BTS
HOUR
0~23
O&M of Compound HOUR, MINUTE
BTS Type MINUTE 0~59 None None None BTS
O&M of degree
BTS Interval Type -99~99 -99~99 Celsius 50 50 BTS
Concentric
Cell Interval Type 0~8 0~8 None 3 3 Cell
Concentric
Cell Interval Type 0~255 0~255 s 10 10 Cell
Concentric
Cell Interval Type 0~63 0~63 dB 35 35 Cell
GSM/WCD
MA
Concentric
Interoperabi
Cell Interval Type 1~63 1~63 dB 5 5 Cell
lity
GSM/TD-
SCDMA
Interoperabi Enumeration FDD(FDD),
lity Type TDD(TDD) FDD, TDD None None None Cell
O&M of NONE(None), 2
BTS String Type None
LEVEL4(User characters None None None BTS
Level 4),
LEVEL3(User
GSM Flow Level 3),
Control Interval Type LEVEL2(User
50~95 50~95 per cent 95 95 BSC
Level 2),
LEVEL1(User NONE,
Level 1), LEVEL4,
GSM Flow Enumeration NO(No),
LEVEL0(User LEVEL3,
Control Type YES(Yes) NO, YES None NO NO Cell
Level 0), LEVEL2,
LEVELB(User LEVEL1,
Level B), LEVEL0,
GSM Flow Enumeration LEVELA(User LEVELB,
Control Type Level A) LEVELA None LEVEL0 LEVEL0 None
GSM Flow
Control Interval Type 50~95 50~95 per cent 90 90 BSC
DISABLE(Disab
le),
Enumeration ENABLE(Enabl DISABLE,
IP QOS Type e) ENABLE None DISABLE DISABLE IP path
Ethernet Ethernet
OAM Interval Type 2~4094 2~4094 None None None port
Abis over
Ethernet
IP Interval Type 2~4094 2~4094 None 2 2 BTS
OAM
Configurati
on
Manageme Ethernet
nt Interval Type 2~4094 2~4094 None None None port
Faulty
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None OPEN None None
Faulty
Manageme 1~9
nt String Type None characters V 28 None None
Faulty
Manageme 1~9
nt String Type None characters V 20 None None
Faulty
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None OPEN None None
Faulty
Manageme 1~9
nt String Type None characters V 57 None None
Faulty
Manageme 1~9
nt String Type None characters V 42 None None
Faulty
Manageme Enumeration NO(NO),
nt Type YES(YES) NO, YES None YES YES BTS
14,
14(1.4), 15,
O&M of 15(1.5), 16,
BTS Interval Type 16(1.6),
0~12 18,
0~12 None 2 2 Cell
18(1.8), 20,
18,
20(2.0), 22,
Faulty 18(1.8), 20,
22(2.2), 24,
Manageme 20(2.0), 22,
24(2.4), 26,
nt Interval Type 22(2.2),
1~30 24,
1~30 None 3 3 BTS
26(2.6), 28,
24(2.4), 26,
28(2.8), 30,
26(2.6), 28,
Faulty 30(3.0), 33,
28(2.8), 30,
Manageme Enumeration 33(3.3), 36,
30(3.0), 32,
nt Type 36(3.6), 88(8.8) 88 None 20 20 BTS
32(3.2), 35,
35(3.5), 38,
Faulty 38(3.8), 41,
Manageme Enumeration 41(4.1), 45,
nt Type 45(4.5), 88(8.8) 88 None 30 30 BTS
O&M of
BTS Interval Type 0~12 0~12 None 2 2 Cell
O&M of
BTS Interval Type 0~999 0~999 None None None BTS
Radio
Dedicated
Channel
Manageme 4000~330
nt Interval Type 4000~33000 00 ms 27000 27000 Cell
3000~340
AMR FR Interval Type 3000~34000 00 ms 34000 34000 Cell
3000~340
AMR HR Interval Type 3000~34000 00 ms 26000 26000 Cell
Emergency
Call Service
(TS12) Interval Type 1~30 1~30 s 15 15 Cell
IBCA
(Interferenc
e Based
Channel
Allocation) Interval Type 0~60 0~60 s 4 4 Cell
INACTIVE(Inact
O&M of Enumeration ive), INACTIVE,
BTS Type ACTIVE(Active) ACTIVE None INACTIVE INACTIVE BTS
Faulty
Manageme Enumeration CLOSE(Close), CLOSE,
nt Type OPEN(Open) OPEN None OPEN None None
O&M of
BSC
Security NOLIMIT(No
Manageme Enumeration Limit), NOLIMIT,
East_Longitude
nt Type LIMIT(Limit) LIMIT None NOLIMIT NOLIMIT BSC6900
(East
Longitude), East_Long
BSS-Based West_Longitud itude,
LCS (Cell Enumeration e(West West_Lon
ID + TA) Type Longitude) gitude None None None Cell
INACTIVE(Inact
O&M of Enumeration ive), INACTIVE,
BTS Type ACTIVE(Active) ACTIVE None INACTIVE INACTIVE BTS
IP Fault
Detection
Based on Enumeration NO(NO),
BFD Type YES(YES) NO, YES None None None None
SUN(Sunday),
MON(Monday),
Abis over Enumeration DENY(Deny), DENY,
TUE(Tuesday), SUN,
IP Type ALLOW(Allow) ALLOW None DENY None BSC
O&M of WED(Wednesd MON,
BSC ay), TUE,
Security THU(Thursday), WED,
Manageme Enumeration FRI(Friday), THU, FRI,
nt Type SAT(Saturday) SAT None None None BSC6900
M3UA_ASP(M3 M3UA_AS
UA_ASP), P,
Enumeration M3UA_IPSP(M M3UA_IP
A over IP Type 3UA_IPSP) SP None M3UA_ASP M3UA_ASP SCCP
O&M of
BTS Interval Type 0~24 0~24 h 22 22 TRX
O&M of 5~1275,
BTS Interval Type 1~255 step:5 min 12 12 TRX
O&M of
BTS Interval Type 0~24 0~24 h 8 8 TRX