Professional Documents
Culture Documents
585 DC 5 e 012129
585 DC 5 e 012129
............................................................................................................................1
Software Update Operation Description
................................................................................................................1
Software Update install
................................................................................................................4
Software Update Operation
........................................................................................................... 8
Read and set parameters
logo ........................................................................................................... 12
Update Startup "logo"
Software Update Operation Description
1 SGLvape (windows).exe
Download installation package On official website www.sigelei.com, double-click SGLvape
(windows).exe to start to install after unpack.
2 Next
Click Next to continue.
1
3 I Agree
Click I Agree to continue.
5 Install
Choose Destination Folder, Click Install to install.
2
6 Finish
Click Finish to close.
3
Software Update Operation
2
Click to choose language.
4
3 Micro USB
Micro USB Micro USB Connected Upgrade
4
Click to Upgrade icon to enter upgrade menu.
5
5 open fileM77USB.bin
Click to open file, Choose upgrade file. (Such as: M77USB.bin)
6O 100
Click to open, Software is upgrading until success.
6
7 Micro USB logo
Turn off the software, unplug Micro USB and then turn on mod(Put the battery), Screen will
display logo. Next clicking fire button five times consecutively to keep normal work. It means
upgrade successfully.
Tips:
1 Micro USB
During upgrading please dont turn off software or disconnect Micro USB.
2
If Upgrading is failure(Such as showed abnormal or mod wont turn on ), Refer to the step
above again.
8
If upgrade file is too large you will get an error message, Please change upgrade file.
2 Micro USB
connected
Turn on the mod (Put the battery) and then press fire button five times consecutively to
enter standby screen; Insert Micro USB to connected to computer untilConnected icon
brightened.
8
3 Parameter Settings
4 Read Save
Click Read to read mod current parameters, and then click Save to keep set the
parameters
9
5 Basic Parameter Operate Mode
Save
Select Operate Mode(Choose Power Mode or TC Mode) in Basic Parameter menu, Set the
parameters(Reference instruction manual ) ; Click Saveto finish setting.
10
6 TCR TCR Read TCR
Save TCR 0.0000~5.9999
Click TCR to set TCR parameters(Reference instruction manual); Click Read TCR to read
current settings and then click Save to finished(Range: 0.0000~5.9999)
8 Micro USB
After save setting to turn off the software, Unplug Micro USB then turn on the mod to use
normally.
11
logo
Update Startup "logo"
1 Micro USB
connected
Turn on the mod (Put the battery) and then press fire button five times consecutively to
enter standby screen;Next insert Micro USB to connected to computer untilConnected icon
brightened.
2 User Interface
12
3 open picture logo logo.txt
Click Open picture to choose the loaded document(Such as Logo.txt).
4O logo
Click to choose logo picture.
13
5 OKlogo
Click OK to update logo success.
6 USB logo
Turn off the software, unplug USB and then restart the mod, New logo will display.
Tips:
1 Micro USB
2 logo
3 logo http://www.sigelei.com
Tips:
(1) During upgrading please dont turn off software or disconnect Micro USB.
(2) If Upgrading is failure(Such as showed abnormal or mod wont turn on ), Refer to the step
above again.
(3) Newest Logo file please download to the official website(http://www.sigelei.com).
14