Professional Documents
Culture Documents
Scope: Lube-Gear, Synthetic C 1 1
Scope: Lube-Gear, Synthetic C 1 1
This DTNA Material Specification covers heavy duty, extreme pressure, API GL-5 gear oil. It is compounded
using a synthetic basestock, which has a high viscosity index and an exceptionally low pour point. This
lubricant contains extreme pressure additives, as well as rust, oxidation and corrosion inhibitors to protect
gears and bearings operated under a wide variety of load conditions.
Application
This lubricant is used in Axle Alliance Company, Meritor and Dana rear drive axles installed in all DTNA vehicle
models.
Requirements
1. This lubricant meets the following specifications:
a. API Service Classifications GL-5 and MT-1
b. MIL-PRF-2105E / SAE J2360
c. Arvin Meritor 076-N
d. Dana Corporation, SHAES 256 Rev C
e. Dana Corporation, SHAES 429
2. Delivery must conform to drawing specifications. No changes permitted without prior approval from DTNA
Engineering.
3. Permitted substitutions:
a. 48-26154-000 may be used as substitute for 48-26002-000, but may incur a cost penalty.
b. 48-26002-000 may not be used as a substitute for 48-26154-000.
MPB TCA
REFORMATTED. REMOVED BASF EMGARD FE 75W-90. ADDED NOTE 3. C P53761-01
04/07/17 04/07/17
Drawn by Approved
Revision Description Rev Release
/ Date / Date
Delivery must conform to drawing specifications. No changes Initial Release
ENGINEERING STANDARDS are permitted without prior approval from DTNA Engineering. P42823-01
Description Date Name
Drawn by 08/05/11 R.GEARY
LUBE-GEAR,SYNTHETIC Approved 08/05/11 R.MARTIN
Units Rev Sheet Document Number
DAIMLER TRUCKS
NORTH AMERICA INCH C 1 of 1 48-26002
The information contained herein is confidential and proprietary to Daimler Trucks North America LLC (DTNA) and shall not be copied, reproduced, disclosed,
published, or used for any purpose without the express written consent of DTNA.
Office Doc