Professional Documents
Culture Documents
WS 3
WS 3
ICN # 00-032858
Model NGGC-312 PL-01
Series DynaCeptor
APPLICATION
CARTRIDGE FOR NATURAL GAS SERVICE USED TO COALESCE AEROSOL LIQUIDS. TYPICALLY USED IN REVERSE FLOW COALESCER STYLE VESSEL SUCH
AS PECO 77V OR COMPETITORS.
FEATURES / BENEFITS
PEACH SATURATED DEPTH TECHNOLOGY COALESCER.
INTERNAL CARTRIDGE DRAINAGE SLEEVE ON BOTTOM CAP TO PREVENT AERSOLS DRAINING FROM RE-ENTRAINING IN GAS STREAM
ADVANCED TECHNOLOGY DEPTH FILTER THAT PROVIDES A RIGID STRUCTURE THAT MAINTAINS AN OPEN POROSITY AND PERMEABILITY FOR
FLOW.
ROBUST DESIGN LESS SUSCEPTIVE TO RUPTURE DURING SLUG FLOW CONDITIONS.
HELICAL FLOW PATH FORCES THE GAS TO TAKE A LONGER PATH THROUGH THE ELEMENT THUS INCREASING THE CONTAMINANTS CHANCES OF
IMPACTING FIBERS AND COALESCING.
PEACH TECHNOLOGY GAS COALESCERS TYPICALLY OPERATE AT A LOWER DIFFERENTIAL PRESSURE THEN TRADITIONAL DEPTH MICROGLASS OR
PLEATED MICROGLASS COALESCERS. THIS EQUATES TO LOWER OVERALL ENERGY COSTS.
SPECIFICATIONS
4.50 OD X 2.9 ID X 12.00L NOMINAL DIMS
PEACH ADVANCED TECHNOLOGY DEPTH FILTER MADE USING POLYESTER PECO ENGINEERED MEDIA (PEM)
POLYESTER OUTSIDE DRAINAGE LAYER
EXPANDED METAL SUPPORT
304 STAINLESS STEEL TOP CAP CLOSED WITH SILICONE SEAL NUT
POLYESTER BOTTOM CAP; OPEN W/ ELEMENT DRAINAGE SLEEVE AND VITON FLAT GASKET SEAL
OPERATING PARAMETERS
MAXIMUM OPERATING TEMPERATURE 240F / 115.6C
RECOMMENDED CHANGE-OUT DIFFERENTIAL PRESSURE 10-15 psid / .69-1.0 bar
MAXIMUM ALLOWABLE DIFFERENTIAL PRESSURE OF CARTRIDGE 25 psid / 1.7 bar
DO NOT EXCEED MAXIMUM ALLOWABLE DIFFERENTIAL PRESSURE OF THE VESSELS ELEMENT SUPPORT PLATE.
STANDARD FLOW DIRECTION: INSIDE TO OUTSIDE
The enclosed information is the property of PECOFacet and is furnished in confidence solely for the purpose of evaluating PECOFacet technology. It is not to be
copied, communicated or distributed without the expressed written consent of PECOFacet. The information presented above is based on internal data that is
believed to be as accurate as possible. However, PECOFacet shall not be liable for any misuse or misrepresentation of the product. Its intended use is to be a guide
for sales, distributors and customers in order to understand the performance and construction of PECOFacet cartridge. Dimensions presented are nominal and
include +/- tolerances. Performance Rating is based on PECOFacet standard testing protocol.
ELEMENT REMOVAL
J REQ'D FOR
1/2" VENT
OUTLET
NAME PLATE
SHELL DIA.
0
1/2" PDI G H
315 45
EQUALIZER
DRAIN
12"
REDUCER
1" EQUALIZER
F.S.
OUTLET INLET
12"
270 CL 90
HLSD PDI
1" HLSD
12"
VENT
225 135
PDI
8"
1" DRAIN
F.S. LG
CL NAMEPLATE
2"
1/2" LG
180
F B.C.D.
BOLT HOLES LOCATED
AT 45 OFF VESEEL CL
T R U E O R I E N TAT I O N
Vessels are designed and stamped in accordance with ASME pressure vessel code for 275 PSIG at 100 F without corrosion allowance.
Corporate Offices & Plant Perry Equipment De Mxico Peco Filters, Ltd.
PERRY EQUIPMENT CORPORATION Parque Industrial Benito Jurez 1351 Hastings Crescent S.E.
Wolters Industrial Park Acceso III, 4-A Calgary, Alberta
e-mail: P.O. Box 640 Quertaro, Quertaro, Mxico C.P. 76120 Canada T2G-4C8
elements@perryequipment.com Mineral Wells,Texas 76068 Telephone: 52-42-10-34-89 Telephone: 403-243-6700
Telephone: 940-325-2575 Telefax: 52-42-10-90-39 Telefax: 403-287-9304
web site:
www.perryequipment.com 800-877-PECO Parque Industrial Quertaro e-mail: canadasales@perryequipment.com
Telefax: 940-325-4622 Calle Cerrada La Noria #108
e-mail: mwsales@perryequipment.com Santa Rosa Jaurequi
European Offices
PERRY EQUIPMENT LTD.
Quertaro, Quertaro, Mxico C.P. 76220
Houston Branch Office e-mail: mexicosales@perryequipment.com
Brunel Business Court
1758 West Sam Houston Parkway N. Brunel Way, Thetford
Houston,Texas 77043-3115 Perry Equipment Norfolk 1P24 1HP
Telephone: 713-973-2575 Corporation England
Telefax: 713-467-0475 S.E. ASIA REGIONAL OFFICE Telephone: 01842 821000
e-mail: houstonsales@perryequipment.com 35-4 Jalan SP2/1 Telefax: 01842 821050
Taman Serdang Perdana, Seksyen2, e-mail: uksales@perryequipment.com
Perry Equipment 43300 Seri Kembangan www.perry-equipment.co.uk
Italiana S.R.L. Selangor D.E., Malaysia
via Camozzi, 106
Telephone: 603-8941-2366
24121 Bergamo (BG)
Telefax: 603-8941-1366
Italy
e-mail: asiasales@perryequipment.com
Telephone: 3903-523-6340
Telefax: 3903-523-6380
e-mail: italysales@perryequipment.com
FS-89-SL-01 (LHA 12/03) Please refer to www.perryequipment.com for most current literature edition. Printed in USA
Oil & Gas Vessels
P E R RY E Q U I P M E N T C O R P O R AT I O N
Coalescing
Efficiency at
Economic
Prices
Utilizing
P E A C H G a s
Coalescing
Filter
Elements
E N G I N E E R E D F I LT R AT I O N T E C H N O L O G I E S
P E C O S E R I E S 8 9 C o a l e s c i n g F i l t e r p ro d u c t l i n e .
Quality and economy with the PEACH advantage
Coalescing Filter
Elements for
enhanced
performance
capacities.
S I Z I N G I N F O R M A T I O N
CORRECTION FACTORS
1.40
scale. Follow temperature on the horizontal scale. Follow
temperature line vertically until it intersects with the specific
1.30 gravity line.The correction factor is then found horizontally
1.00 to the right of this intersection.
1.20
.90
(2) Multiply the flow rate (SCFH) by the correction factor.
.80 1.10
200
180
OPERATING PRESSURE PSIG
160
140 89-1-312-6-275
120 89-1-324-6-275
100 89-1-336-6-275
80 89-1-336-8-275
60 89-1-540-10-275
40
20
0
0 20,000 40,000 60,000 80,000 100,000 120,000 140,000 160,000 180,000 200,000 220,000 240,000
O R D E R I N G
For information on replacement elements, please refer to brochure EL-NGGC-TD-01.
89 1 336 6 275
P E R RY E Q U I P M E N T C O R P O R AT I O N
ISO 9001
Series NGGC
Liquid Aerosol Coalescing Elements
PECO introduces the next generation in PEACH
Gas Coalescer Technology. The Next Generation
Gas Coalescer features an advanced proprietar y
media blend, an element support design, and a
new proprietar y end cap design. The result is a
coalescer that can handle a wide variety of liquid
loading conditions in air and gas applications.
Construction
Standard Optional
Media/Outer Cage/End Caps Polyester Polypropylene
Gaskets Viton
Operational Data
Standard Flow Direction Inside-to-outside of element
Micron Ratings
Liquids: 0.3 micron and larger
Solids: 0.3 micron and larger
Maximum Operating
Temperature 180 F / 82 C
Recommended
Element Change Out
Differential Pressure 10 - 15 psid
The NGGC
features a
user friendly
Integral End Seal. Elements are designed to
fit PECO Vessel Series 77V.
Competitive retrofits
available.
PRODUCT
ADVANTAGES
The Conical Helix
Proprietary media
blend for excellent The NGGC utilizes patented PEACH technology. It consists
performance.
Element support cage
of several lateral sections of var ying sizes. Each lateral section
provides strong structural consists of multiple helical wrapped layers. As the spiral layers
strength.
are applied they conform to the previous layer forming a cone
Top end cap, with integral
seal, provides better thus developing a conical helix.
sealing around
center bolt.
Top end cap, with
integral seal, eliminates
use of dimple washer
and provides ease of Specification Data
use during element
change-out. Model Length OD ID
Proprietary bottom NGGC - 312 12" 4.5" 2.95"
end cap distributes gas
NGGC - 324 24" 4.5" 2.95"
flow throughout the
element to better utilize NGGC - 336 36" 4.5" 2.95"
the entire element matrix.
Proprietary bottom
end cap provides an area
of low velocity to facilitate
Nomenclature
liquid drainage. NGGC 336
DISPOSAL
PRODUCT LINE DIMENSIONS MEDIA MISCELLANEOUS
ADVANTAGES Next Generation OD x LENGTH No Symbol = Polyester
Gas Coalescer PP + Polypropylene
312 = 4.5 X 12
All synthetic construction* 324 = 4.5 X 24
336 = 4.5 X 36
Can be fully incinerated
Light weight *Consult factory for retrofit dimensions & part nomenclature.
* PECO housing models only
Corporate Offices & Plant Perry Equipment De Mxico Peco Filters, Ltd.
PERRY EQUIPMENT CORPORATION Parque Industrial Benito Jurez 1351 Hastings Crescent S.E.
Wolters Industrial Park Acceso III, 4-A Calgary, Alberta
e-mail: P.O. Box 640 Quertaro, Quertaro, Mxico C.P. 76120 Canada T2G-4C8
elements@perryequipment.com Mineral Wells,Texas 76068 Telephone: 52-42-10-34-89 Telephone: 403-243-6700
web site: Telephone: 940-325-2575 Telefax: 52-42-10-90-39 Telefax: 403-287-9304
www.perryequipment.com 800-877-PECO e-mail: canadasales@perryequipment.com
Parque Industrial Quertaro
Telefax: 940-325-4622 Calle Cerrada La Noria #108
e-mail: mwsales@perryequipment.com Santa Rosa Jaurequi
European Offices
PERRY EQUIPMENT LTD.
Quertaro, Quertaro, Mxico C.P. 76220
Houston Branch Office e-mail: mexicosales@perryequipment.com
Brunel Business Court
1758 West Sam Houston Parkway N. Brunel Way, Thetford
Houston,Texas 77043-3115 Perry Equipment Norfolk 1P24 1HP
Telephone: 713-973-2575 Corporation England
Telefax: 713-467-0475 S.E. ASIA REGIONAL OFFICE Telephone: 01842 821000
e-mail: houstonsales@perryequipment.com 35-4 Jalan SP2/1 Telefax: 01842 821050
Taman Serdang Perdana, Seksyen2, e-mail: uksales@perryequipment.com
Perry Equipment 43300 Seri Kembangan www.perry-equipment.co.uk
Italiana S.R.L. Selangor D.E., Malaysia
Please refer to via Camozzi, 106
Telephone: 603-8941-2366
www.perryequipment.com 24121 Bergamo (BG)
Telefax: 603-8941-1366
for most current Italy
e-mail: asiasales@perryequipment.com
Telephone: 3903-523-6340
literature edition.
Telefax: 3903-523-6380
e-mail: italysales@perryequipment.com