Professional Documents
Culture Documents
S355 JR 123 PDF
S355 JR 123 PDF
S355J2H EN 10210
Dimension Range
S355J2H EN10210 hollow section is available at circular shape.
Circular 26.9- 133 mm
Wall thickness 2.0- 6.30 mm
Mill length 6000 mm
Dimensions
Circular
Diameter 2.0mm 2.5mm 2.6mm 2.9mm 3.0mm 3.2mm 3.6mm 4.0mm 5.0mm 6.0mm 6.3mm
(kg/m) (kg/m) (kg/m) (kg/m) (kg/m) (kg/m) (kg/m) (kg/m) (kg/m) (kg/m) (kg/m)
26.9 mm 1.23 1.50 1.56
33.7 mm 1.56 1.92 1.99 2.27 2.41
42.4 mm 1.99 2.46 2.55 2.82 2.91 3.09 3.79
48.3 mm 2.28 2.82 2.93 3.35 3.56 4.37
60.3 mm 2.88 3.56 4.11 4.24 4.51 5.55 6.82
76.1 mm 3.65 4.54 5.24 5.41 7.11 8.77 10.8
Mechanical Properties
Thickness Yield Strength Rp0.2 Tensile Strength Rm Elongation A Charpy-V -20C 1) 10x10
(mm) (min MPa) (MPa) (min %) mm test specimen
(J)
2- 3 355 510- 680 22 27
3.01- 6.30 355 470- 630 22 27
1) The impact testing according to EN ISO 148-1 is performed on thicknesses 6 mm. The specified minimum value correspond to a full-size specimen.
Chemical Composition
C Si Mn P S
(max %) (max %) (max %) (max %) (max %)
0.22 0.55 1.60 0.030 0.030
The steel is aluminium-killed.
CEV 0.45
(max %)
CEV=C+Mn/6+(Cr+Mo+V)/5+(Ni+Cu)/15
Tolerances
Contact Information
www.ssab.com/contact
The English version of this document shall prevail in case of discrepancy. Download the latest version of this document at www.ssab.com
SSAB, Strenx, Hardox, Docol, GreenCoat, Toolox, Armox, Ramor, Domex, Laser, Raex, Duroxite are trademarks owned by the SSAB group of companies.