Professional Documents
Culture Documents
Asco Series 44 Pressure Sensor Catalog
Asco Series 44 Pressure Sensor Catalog
Specifications
Performance @ 25C (77F)
Accuracy1 <0.25% BFSL
Stability (1 year) 0.25%FS, typ Electrical Data
Proof Pressure 2X Rated Pressure Excitation 5VDC 10-28 VDC
Output 0.5-4.5V Ratiometric 1-5 V & 4-20mA
Burst Pressure 5X or 20,000 PSI,
whichever is less Input Impedance N/A N/A
Wetted Material 17-4PH S.S. (NACE compatible) Output Impedance 100 Ohms nom. 100 Ohms, nom. -
(for other material consult factory) Current Consumption <10mA <10mA & 25mA max
Pressure Cycles > 100 Million Bandwith (-3dB) DC to 1kHz DC to 1kHz & 250Hz
1 Output Noise <2mV RMS <2mV RMS
Accuracy includes: Non-linearity, Hysteresis and Non-repeatability
Reverse polarity YES YES
44-A-00500-B-3-L-0-000
Dimensional Information
Class I, Div. 1, Groups C, D The transducers listed below are designed for installation in a Class I, Division 1, Groups C and D,
Hazardous Location Nonhazardous Location Division 1 hazardous location when connected to Associated Apparatus as described in note 1.
Entity Parameters
Hazardous Location
Vmax = 28Vdc
Red 3 excitation + Imax = 175mA Imax is the total current available from the Associated
Black 4 Intrinsic Safety 2 excitation - C1 = 0.44uf Apparatus under any condition.
/PA
Barrier PA/ L1 = 0
44X0 mV
output Green 3 signal + Notes:
White Intrinsic Safety
4 2 signal - 1. Associated Apparatus shall provide intrinsically safe connections which meet the following parameters.
Barrier PA/
/PA
Voc or Vt Vmax Ca C1 + Cleads
Isc or It Imax La L1 + Lleads
Figure 1: Wiring diagram for Ground Bus
4-wire, mV output 2. Control Room aparatus shall not generate in excess of 250V (Umax).
I. S. ground
conductor 3. Installation should be in accordance with Article 504 in the National Electrical Code, ANSI/NFPA 70.
Table 1
Red
44X0 3 supply voltage Output Pin 3 Pin 2 Pin 1
Black 4 Intrinsic Safety 2
4-20 mA 1-5V +V Supply -V Supply Output
Barrier PA/
output /PA
analog
RL 4-20mA +V Supply -V Supply N/C
input
supply
common
Ground Bus
Figure 2: Wiring diagram for
2-wire, 4-20mA output I. S. ground
conductor
Red
44X0 3 supply voltage
White Intrinsic Safety
Voltage 4 2 signal
Black Barrier
output /PA PA/ common
Ground Bus
Figure 3: Wiring diagram for common
3-wire, Voltage output I. S. ground
conductor