Professional Documents
Culture Documents
A325 Tension Control Bolts PDF
A325 Tension Control Bolts PDF
Product Line
reached, the tip of the bolt will shear. Handy tip lever for ejecting sheared tips
When the tip of the bolt shears, pull Rubber bumper for tool body protection
back on the wrench until the outer SPECIFICATIONS INCLUDES
socket is no longer engaging the nut. Capacity Bolt Drive 5/8, 3/4, Outer Sleeve - 3/4
7/8 (764320-3)
4. Push the ejector lever to discharge No Load RPM 18 Inner Sleeve - 3/4
Determining Proper Bolt Length (764325-3)
the severed bolt tip. Torque (ft.-lbs.) 600
5. Catch the sheared bolt tips to pre
BOLT SIZE (INCHES) TO DETERMINE THE PROPER
BOLT LENGTH ADD TO THE
Length 9-13/16 Outer Sleeve - 7/8
Net Weight (lbs.) 10.6 (764319-8)
GRIP* (INCHES)
vent them from falling below. Inner Sleeve - 7/8
3/4" 1" (764322-9)
7/8" 1-1/8" Screwdriver
(783001-0)
Excluding washers, the lengths determined by the use Tool Case
of this table should be rounded up to the next 1/4 (150479-6)