Professional Documents
Culture Documents
Basic Computer Operations: Keyboard Disks Modems Screen (Monitor) Printer
Basic Computer Operations: Keyboard Disks Modems Screen (Monitor) Printer
Keyboard Symbols
The following chart displays the character symbols, name and Latin-1 number on a standard
keyboard in their approximate position on the keyboard. Most characters from any Roman based
language can be created on any computer using the American Standard Code for Information
Interchange or ASCII using a single byte. Most computers and software also recognized
American National Standards Institute's (ANSI) formatting standards as well. View the entire
ISO Latin -1 Character Set.
~
Tilde
~:
!
Exclamation Point
!
@
At
@
#
Number
#
$
Dollar
&#;36
%
Percent
%
^
Caret
&#;94
&
Ampersand
&
*
Asterisk
*
(
Open or Left Parenthesis
(
)
Close or Right Parenthesis
)
_
Underscore or
Horizontal Bar
_
+
Plus
+
`
Acute
`
-
Dash or Hyphen
-
=
Equals
=
{
Open or Left Curly Brace
&#;123
}
Close or Right Curly Brace
}
|
Or or
Vertical Bar
|
[
Open or Left Square Bracket
[
]
Close or Right Square Bracket
]
\
Reverse Solidus or Backslash
\
:
Colon
:
"
Quote
"
;
Semi Colon
;
´
Apostrophe or Single Quote
&#;39
<
Less Than
<
>
Greater Than
>
?
Question Mark
?
,
Comma
,
.
Dot, Period or Full Stop
.
/
Solidus or Forward Slash
/
Using Software
As stated earlier software is anything created and/or stored on a computer or computer storage
device (like a disk). The work that is produced using an application or program is also software
and is usually referred to as a file or a document.
Files & Documents
Once you have typed or created a new document or file on your computer, you will have to
decide what to do with it. You could print it right away using a Print command and then Exit or
Quit your program without saving it, but most of the time you will want to Save your document
for future use.
The computer saves its information on a disk, most often the hard disk, and the users determines
where and when the file or document is saved.
top
Folders & Directories
On the disk are directories or collection of folders. These directories or
folders could be compared to a filing cabinet. All files are stored in a
directory. Most hard disks have many directories or folders and files can
be stored in any of them.
Directories can have sub-directories and sub-sub-directories many levels
down. The directory immediately below the current directory is called the child directory. The
directory immediately above the current one is called the parent directory. The top of the
directory structure is called the root directory.
When a user adds or installs a new program on the computer the installation process will usually
create a new directory or folder to store the application's files.
Users can create and delete directories or folders as the need arises. Older operating systems
require that the directory be emptied of files before it can be deleted. When removing a directory
always check before deleting it to make sure that it doesn't contain files you need.
You can easily move files from one folder or directory to another using menu commands, drag
& drop using the mouse or a file utility. It is important to understand your computer's
directory structure as a file can be misplaced if it is saved in the wrong directory.
One of the main problems new users have is creating a filing system. Modern operating systems
address the 'filing problem' by automatically creating a (My) Documents folder. By saving files
or documents in this folder you will always know where to look for your files. Create sub-folders
within this folder for your main projects. Examples could be a separate folder for your
correspondence called Letters or a folder for images called Graphics or Pictures. The main
Documents folder can also be renamed to what every name you want it to be called. If your
operating system doesn't automatically create this folder simply create your own Documents
folder to save your documents in.
Printing
The promise of a paperless office has not happened though conservation is catching on and it is
possible to reduce paper consumption by using your computer more effectively. Having said that
many computers are attached to printers and there are many reasons to print out documents that
you create on your computer. Most software programs and applications allow the user to print
the information that is created in the program.
When choosing a printer consider the peripheral equipment that you will need as well as the
actual printer. Peripherals include paper, ribbons or ink cartridges, toner and occasionally
print heads.
You may have to adjust some of the settings for the printer to get the output you want. Density
adjustments determine how much ink is placed on the paper or how many dots per inch (DPI).
Draft quality will printer quicker but creates a fainter copy (less dense). Modern Software has a
Preview option which show what the page will look like when it is printed. Portrait prints the
document up and down. Landscape prints the document on it's side. Most software allows the
user to adjust the margin width or the blank space at the top, bottom, left and right edge of the
paper.
Exit or Quit
It is important to Exit or Quit a program, application and the operating system before shutting
off the computer. It is a good idea to Quit a program when you are finished with it as it takes up
memory. Exiting a program should free up the memory that the program was using. Having a
number of programs running simply uses up resources that may be needed in another project.
Exiting properly also saves the program settings so that when you return to the application many
changes that were made will still be active.
Menus
Menus are the most common way of interacting or controlling your software. Though each
program has it's own menu, modern software developers have begun establishing some
standardization in how they create their menus. Many programs have a menu called File which
controls things like Opening, Saving and Printing your file and Exiting the program. Many
also have an Edit menu which contains the main editing commands like Cut, Copy and Paste.
The items on the menu are Commands or the features of the program. You choose the command
that you want with the keyboard, mouse, trackball or touchpad. Commands control the operation
of the software.
Menu bars are usually positioned at the top of the screen and are accessed by moving the cursor
to the menu and pressing the button (left button if there are two). This displays a pull down
menu with a number of commands or features. Depending on how the program works either let
go of the button and move to the command you want then press the button again to choose it or
while holding down the button, move to the command and let go to choose it.
Menus can also be controlled through the keyboard. The most common way of accessing the
menu through the keyboard is by pressing the Alt key and using the Arrow or Cursor
Movement keys to move through the menu items, then pressing Enter to choose the item you
want. Many menu items can also be accesses using Hot key combinations. One common
keyboard combination is to first tap the Alt key and then press letter key for the command you
want.
Menus are created in a hierarchy. Some menu items branch out to give even more choices.
Some menu items open Dialog Boxes that allow you to choose from a number of different
options.
Dialog boxes allow computer users to select different options.
Some dialog boxes have 2 or more Tabs which can be clicked to
choose more options. Once the options have been chosen press
Okay to apply the options. Some dialog boxes have an Apply
button which will apply the options that you have chosen without
closing the dialog box. Choose Cancel to close the dialog box
without applying the changes selected. Note that options set with
the Apply button cannot be canceled this way.
Modern software places the most popular commands on a toolbar
for easier access. Simply click the left mouse button over the
menu item to access a particular command. These tool bars can
usually be customized and often allow the user to move or Tear
Off the menu and drag them to a preferred location or Dock on
the screen. Menus can also be customized by adding or removing commands.
Windows has a context sensitive menu that is activated with the right button. When the right
mouse button is click over an object on the screen or area of the screen, a specific menu with
commands related to that object will be displayed. Click the left mouse button on the command
to choose it.
Backing up Files
Computer errors and software failures happen ocasionally so it is important to backup your files
and documents.
One simple way to backup your files is to copy them to a disk. If there are only a few small files
a floppy disk will work but if you are backing up lots of large files a cd/dvd burner, a second
hard drive or tape backup may be needed. You can use a software program to automate backups
or do it manually. A manual backup usually involves dragging the files or folders to the backup
disk or tape to create the duplicate backup.
Store your backup files in a safe place out of the sun and away from electro-magnetic devices
such as speakers and wires with strong electrical currents.
Every file that you create and plan to keep should be backed up. This includes word processing
documents, financial information, databases, photos, etc...
Some less obvious files that also need to be backed up are email, Internet Favorites or
Bookmarks, and Address Books. Check the help files in your email program on how to back up
email. Generally each folder name in your email program is a file containing the individual email
messages and copying these files to the backup disk or tape will be sufficient. Software
preferences such as customized menus and settings can also be backed up. Check your software's
help files to find out where these files are located.
A newer software version may be installed on the computer before ever needing the backups so
make sure that the newer programs can handle the older file format.
When to backup is an individual choice. A company should have a backup policy which explains
how and when data should be backed up. It all depends on how important the information is and
how difficult it would be to duplicate it in the event of a system failure. If the information is
critical an automatic backup system that duplicates the documents immediately may be needed (a
Redundant Arrays of Inexpensive Disks (RAID) system is an example). If the files are not
critical a weekly backup may be all that is needed. It is impossible to determine when a system
failure will occur so it is better be cautious.
The backed up data can then be used as an archive, to recover from a system failure or to transfer
data to a new computer system. Simply copy the files to the correct folder to restore them.
Backup software will have an automatic recovery feature that will restore the backed up file
automatically.
Compression and Decompression
Most software you buy or get off the Internet is Compressed. Computers store information in
bytes which are made up of on or off signals. The software applications that uses these files need
to have all the on and off signals (bytes) in place but when the file is stored they can be modified
to take up less space on the storage disk or tape.
There are commercial and shareware programs that will compress and decompressed files for
you. The most popular form of data compression is called zip or stuffit but there are others
available as well.
Programs are also available to compress and decompress your files as you or the application you
are using requires them. This can be a way of making more space available on a hard drive.
Windows comes with a program that will compress part of your hard disk. Be sure to read the
documentation before embarking on a project like compressing a hard drive.
The Desktop
The Desktop offers many features that make using your computer easier. You can easily start
programs or applications, copy and move files from one place to another and drag and drop files
and program where you want them on the computer or even on to a program's icon to open a file.
Open and Save menus are streamlined to allow all applications to have the same basic features
plus program specific features.
Operating systems are often backwardly compatible with older system so that older programs
will run. Usually when new programs are created they are designed to work with the newest
operating system to allow them to use all the newest features.
Desktop
Menu
The Start Button or Apple menu starts programs, opens documents, and access most parts of the
system. Windows Program and Apple Dock menus can be customized as needed.
• Program or Dock displays a list of the programs that are installed through
Windows and available to use
• Documents displays a list of the last 15 documents used allowing the user to
open them directly from this menu
• Settings displays system components, such as printers, control panel and
taskbar
• Find/Search has search abilities to find files, folders and phrases in
documents on your computer
• Help displays help topics broken up into contents, index and find
components
• Run allows you to start a program from a command line
• Shut down shuts down the computer, restarts the computer or logs you off a
network
• Favorites and Active Desktop is an option available to Windows 98+ (or
Internet Explorer 4x) users
Taskbar (Windows) or Dock (Apple)
Computer
• displays all the components of the computer including disk drives and
networks
• all parts of the computer can be accessed through My Computer's
hierarchical structure
• double click on any icon to view the contents of a disk, folder or run a
program
Using Help
• to get help about a specific procedure click the help button in the top right
corner of the screen
• Contents list general topics grouped by subject
• Index list specific topics accessed by scroll bars or typing the topic
• Find creates an index of words in Help and allows searches by word or
phrase
• click Help Topics to return to the Help menu
• Troubleshooters will step you through a series of steps to solve computer
problems (Microsoft)
Creating Folders
• Use the New Folder option in the File menu (or right click) to create a folder in
the active window
Moving and Deleting Files
• Use Drag & Drop to drag the file or folder from one folder to another
○ with the right button a menu will appear allowing you to Copy or Move
the file or folder (Windows)
○ files on the same disk are moved (hold Ctrl to copy)
○ files on another disk are copied (hold Ctrl to move)
Use the Edit menu to Cut the file and Paste it in the destination folder
Hold down Shift while Deleting a file to by pass the Recycle Bin and permanently delete files
Multiple Selection
• to select files sequentially click on the first file and move to the last file, hold
down shift and click on the last file in the sequence
• to select files non-sequentially click on the first file and hold Ctrl while
clicking the rest
• the two methods can be used in combination
Organizing your files and icons
It is important to develop a filing system early. Create a folder on your Desktop to store your
data. Create sub-folders within that folder to sort the various documents, image, sounds and other
files that you create and use. A new folder can be created easily and given a logical name which
will help organize data.
• My Documents or Documents is the default folder created by the operating
system and can be used as is or rename
Troubleshooting
• Both Windows and Mac have a number of tools built in to assist in solving
computer problems
• Choosing Help allow Window users to access Troubleshooting Wizards that
provide step-by-step suggestions
• System Information under System Tools provide valuable information and
access to other system tools in Window
• System Profiler under Application, Utilities provide information about the
Mac
• Running a Disk Scan occasionally or on a schedule can solve many simple
errors
Word Processing
A word processor is a program used to type documents. Documents can be saved, closed and the
opened again to continue working on them.
The keyboard of a word processor is similar to that of a typewriter, but its capabilities extend far
beyond the typewriter's. For example, you don't have to press the Return or Enter key at the end
of every line - in word processing, the line "wraps around" when it reaches the margin you've
set and allows you to continue typing without stopping, you only press Enter (or Return) when
you want to start a new paragraph or insert blank lines. If you make a mistake while typing
use backspace or delete to erase it.
There are many commercial word processing programs including Open Office Writer ,
Microsoft Word , Corel WordPerfect and others. Windows comes with WordPad to
edit and format documents and NotePad to edit text. Mac OS X comes with TextEdit or
SimpleText in previous version. Open Office is an Open Source office application that can be
downloaded for free at openoffice.org.
Editing functions such as inserting, deleting, moving, and copying characters, words, lines,
and even blocks of text are fast and easy with only a few keystrokes. Advanced programs will
number pages, repeat material in the same place on every page automatically, and check the
spelling of every word in your document. You print your document only after it looks exactly
the way you want it to. Finally, copies of your documents can be stored on a disk, enabling you
to retrieve, edit, and print them at any time.
The text appears at the cursor. Use the space bar to place spaces between words. Use
backspace to erase to the left of the cursor and delete to erase to the right of the cursor. Use Enter
(or Return) to move the cursor down a line.
Word processors allows you to type your text in Bold, Italics or Underline. This is useful when
you wish to highlight some word or line in a document. To activate Bold, Italics or Underline
click the icon button on the Toolbar, type the text that you wish to have highlighted then press
Toolbar icon again when you are finished. The indicator on the Toolbar will appear highlighted
as long as the highlight style is on.
The text can also be modified by changing the Font. A font is the shape and size of a character
of text. The three main types are serif (with tails); sans-serif (without tails); and script (similar
to handwriting). Text colours can also be changed.
Text can also be indented and tab settings added which modify where the text is placed on the
page. Rather than press the space bar more than once set tabs where you want the cursor to move
to.
The page can be modified by changing the margins, adding headers or footers (repeating text
on each page), page numbering, graphic images and various other ways.
The Insert key toggles between Insert and Typeover. Sometimes an indicator on the bottom of
the screen will display the typing mode you are in. Normally, any text after the cursor will be
pushed across the screen (inserted) as new characters are typed in. With Typeover on the new
character will just replace the old character at the cursor.
Editing text is quite easy once you get used to it. Select text that you want to modify with the
mouse or by holding down Shift and using the arrow keys. Holding Control (CTRL) will select
text one word at a time.
Once you have the text selected use Cut (Ctrl-X) to cut the text off the page and into a
clipboard. Use Copy (Ctrl-C) to transfer a copy of the selected text to the clipboard. Use Paste
(Ctrl-V) to paste the text into the document at the cursor. The Windows clipboard will only hold
a single selection of text which is replaced with each new cut or copy.
If you make a mistake most modern programs have an Undo feature (Crtl-Z). Many also have a
Redo feature.
Most word processors will check your spelling and many have thesauruses and will check your
grammar. Don't rely on the editing tools to replace a good proof reading though! (as this editor
tends to do ;)
Database
A Database is a collection of information stored in a way that makes it easy to retrieve, modify
and search. A database can be stored in a single file with all the information stored together in a
single table which is called a flat database or stored in multiple tables with some common
access information referred to as a relational database.
There are many commercial database programs including Microsoft Access , Corel
Paradox, FileMaker, IBM DB and others. There are also an Open Source databases such as
Spreadsheet
Spreadsheets are used to work with financial information. Spreadsheet charts are laid out in
numbered rows and lettered columns. Where the row and column intersect is called a cell. The
cell is referred to by the letter and number of the intersection called the cell address. The first
cell in a chart is at the intersection of column A and row 1 and is referred to as Cell A1.
Some commercial Spreadsheets are Microsoft Excel , Corel QuatroPro , Lotus 123 and
others. OpenOffice.org Calc is an Open Source office program that is free to download and
use. Tax and accounting software are also spreadsheets but are
designed to provide tools and utilities which help get the specific job A B C
done. 1
2
When working with numbers in a spreadsheet, refer to the cell 3
addresses when creating mathematical formulas. This is because any
changes you make to a single cell will be automatically updated without having to reenter the
numbers in the rest of the cells.
Use the plus sign (+) to add; the minus (-) sign to subtract; the asterix (*) to multiply; and the
back slash (/) to divide.
Spreadsheets use formulas to create simple to complex mathematical equations. A sheet can be
built to handle the financial needs of businesses.
Most of the standard editing features are available in the spreadsheet such as Bold, Italics,
Underline, Move, Copy and Paste.
Information from a spreadsheet can be displayed in chart form.
Most spreadsheet programs include templates to handle many of the average financial needs of a
home user or small business. These templates can be modified or customized to personalize them
for your own needs.
Most modern spreadsheet programs allow users to work on many sheets at once and access
information from any of the sheets in the workbook group.
LView ULead
There are basically two types of computer graphic, bitmapped and vector/structured.
Bitmapped graphics are images that are mapped to the monitor or screen.
The screen is made up of tiny dots called pixels. These dots can display
various colours depending on the type of computer hardware and software
you have. Using shades of red, green and blue (RGB) an image can be
displayed on the screen by mapping different colours to the screen in
different sequences.
Vector graphics use objects created from mathematical formulas to
represent things like lines, curves, fills, line thickness, etc. to create the
image.
Each type of graphic has it's own advantages and disadvantages. Older versions of HTML were
only able to recognizes bitmapped graphics so most graphics created for the Internet, using
standard HTML, are created or converted to a bitmap format. The newest version of HTML or
XHTML is able to display vector graphics but not all browsers are able to display these graphics.
Within each of the two main types there are dozens of different formats.
Graphics formats are distinguished by their filename extensions.
The three main bitmapped format graphics used on the Internet are .gif, .jpeg (.jpg) and
.png. There are many others including .bmp, .tiff (.tif), .pcx, .ppm, .tga and a host of
others.
Some of the structured formats are .ai, .cmx, .eps, .wpg, .cgm and a host of others.
Bitmapped graphics can be created and modified in a paint program and vector or
structured graphics can be created and modified in a draw program.
The main tools in a graphics program allow you to select a section of a picture, erase
part of a picture, fill a defined area, select a colour, magnify a section, draw free hand,
draw with various tools such as a straight line; a curved line; a rectangle; an oval; and a
polygon. You can also modify a drawing by changing the size, colour, placement, and,
depending on the program, hundreds of other modification.
Sound
Moving Picture Experts Group (MPEG) or .mpg is multimedia format that is an attempt to
create a standardization among the various formats available. MPEG has made it possible to
place audio content on your website without having it sound tiny and hollow or taking an
extreme amount of time to download. There are many different formats for sound including;
Microsoft's .wav, Sun's .au & .snd, RealNetwork's RealAudio , .ra(*), and various others.
You may have heard .mid files play when visiting various websites. Musical Instruments Digital
Interface (MIDI) files are basically sound tracks which use a collection of sounds contained in
the .mid file to play a tune.
To create a sound file you will need an audio program. You can then record with a microphone
or off of a prerecorded medium. Your computer will need to have a sound card properly
installed and a speaker to hear your recording. You can save the sound file to play back later.
Animation
With the advent of faster computers comes animation. Though it has
been around for years the modern computer has made it possible to
include animation in programs without causing them to slow down
(much). As with every multimedia format there are a number of
types.
You may have seen .gif animations on this website. A GIF animation
is a series of separate images or frames that display one after the other to give the impression of
movement. Other formats are Audio Visual Interleave's .avi, the before mentioned mpg,
Microsoft's Media Player .wmv, Apple's Quick Time .qt, .aif(*) & .mov, RealNetwork's
RealVideo .rm(*), Macromedia's Flash creates Shockwave .swf, and JavaScript as well as
various others.
There are various animation or multimedia players available for a free download off the
Internet.
To create animations, sounds or graphics you will need a program that has the capabilities you
want. Visit the various multimedia company websites to read up on their product to see if they
can do what you want. (Hint: to find a company website type "www.'replace this with the
companies name'.com"). Most companies offer free trials that you can download from their
website.
You should also be aware that most media content placed on the Internet is considered published
material and therefore copyright unless explicitly stated otherwise.
Desktop Publishing
Desktop publishing (dtp) uses both word processing and graphics to produce publications and
presentations.
Some common dtp programs are MS Publisher and Quark Express. Both Adobe and Corel
have a number of programs that work like dtp programs. OpenOffice.org Draw is an
OpenSource free option.
Desktop publishing programs layout their documents in a series of slides that can contain text,
graphics and dynamic content. Content is added to each slide in a series which can be printed or
saved as a slide presentation. Sound and music can also be added to the presentation.
Internet
The Internet or the Net is a collection of computers, all link together, to share information
globally. It was first developed in the U.S. by two universities who were both working on the
same contract and wanted to share their data. They were faxing information back and forth and
then retyping it until they came up with a piece of software called Unix to Unix Copy Program
or UUCP.
The Internet was born and has mushroomed outward from that
point.
There are 4 things that are necessary to "get on the net" with a full
graphic interface (picture, sounds, animation, etc...).
• A computer - preferably with a fast processor (around
100 MHz or more) and lots of memory (16 meg or
more)
• A modem - preferably 56,000 baud or high speed digital
• Browser Software - often installed with your operating system or can be
downloaded off the Internet
• An ISP - An Internet Service Provider is a service that connects your home or
office computer to the Internet
Once you have purchased an account with an ISP you will be given an account name. This is
often your email address as well. You will also be given a password and should also be
provided with instructions on how to change the password to a unique and personalized. The
generic password provided with your account should be change to one of your own. Protect your
password as you would any personal identification number (PIN) number.
top
The ISP will also provide information on how to configure your software. This can be simple or
difficult depending on your Operating System. Once configured you simply run the software to
connect your computer's modem to the ISP's modem, giving you access to the Internet.
There are a number of pieces of software that work together to connect you to the Internet.
top
The first and most complicated is the dialer or socket software. This is the software that makes
the physical connection with the ISP's computer and the internet. This needs to be configured
only once but you will need instructions from your ISP on how to do this as each ISP has a
different setup.
top
The second piece is an Internet browser. This is the program that locates websites for you and
allows users to maneuver around (surf) the World Wide Web and view web pages. Some of the
more popular browsers are Mozilla Firefox and Microsoft's Internet Explorer.
Mosaic was the first browser and most modern browsers still use the basic model that the first
browser used. Some other browser are Opera, Safari, Netscape as well as dozens of others.
Before graphic browsers Lynx was the most popular browser and is still available for text
browsing. New browser are being developed and current browsers are constantly updating there
programs. It is extremely important to update your browser every once in a while. Some ISP
have a proprietary type of browser though most have given up this practice as it limits the
users abilities to browse the Internet.
Type the url or web address of the website that you want to visit in the address bar of your
browser and press Enter or click Go. Collect your favorite websites by adding them to your
Favorites or Bookmarks. To go to a Favorite or Bookmark, click on the menu and click on the
link.
Internet - Email
Email is the electronic equivalent of sending a letter through the mail. There are many different
mail reading programs or clients that control email but the basic functions are all the same. An
email address directs a message to the recipient.
Email Attachments
An attachment is a computer file or files place inside an email message.
Email was originally designed to handle only plain text (no formatting, ie. bold,
centering, etc.) which was transferred from one computer to another in a format
called ASCII. ASCII is a standard across all computer types which makes e-mail
universal. Today many modern email programs allow HTML (hypertext markup
language) to be included in email messages which allow you to format your email
messages with font sizes, bold, centre and such. The recipient must have an HTML
capable email reader to see the formatting otherwise they will get a document
marked up with HTML tags.
To attach a document to an email message drag the file attachment to the body of
the message and drop it. An attachment can also be added by choosing File
Attachment from the menu. Most modern email programs place a button on the
Toolbar usually in the shape of a paper clip that you can click. A dialog box will
open that allows you to browse and select the file that you want to attach. You can attach more
than one file to a single email message. Don't move the original document until the message has
been sent.
Most documents created on computer, such as word processing documents (Word, WordPerfect,
etc.) or spreadsheet documents (Excel, Quatro, etc.) or graphic files (Corel Draw, Paint Shop,
or .gif and .jpg files) are stored in their own unique binary code format. This binary format is
determined by the program that the file is created with. Email documents are create as text files
so in order to send a binary file or document via email, it must first be encoded into a text format
and then attached to the email text message.
Such an 'encoded' document may end up looking something like this:
ugAAANAAAAALAAAAAgD//zQAQgBvAGQAeQAgAFQAZQB4AHQAAABCAG8AZAB5ACAAVABlAHgAdAAA
ANMFCwAAAQAACwDT0wQdAAATAAD//wUAsAQAmA0AEA4AaBAAK5sdANPUGxkAgAEAAAgAigIAAAAA
AACKAooCGQDU1BpXAIABAQAIAAAAAAAAAAAAHAD0GlwSGgkAABEJAAAAYAAYEQAAECoAVABpAG0A
ZQBzACAATgBlAHcAIABSAG8AbQBhAG4AAAAAAAAAVABUAAAAVwDU1AILAAABAAELANTUAwsAAAEA
These lines are all printable or lower-ASCII characters and can be sent via email. When it gets to
your computer and you want to view the document, it first must be decoded or converted back to
it's binary format before it can be opened. Today this is typically handled by your Email
program.
There are several common encoding standards, the most popular being uuencoding, mime, and
binhex. Not all email packages support even these three, let alone all the non-standard ones. If
someone sends you a document encoded in a format that your email program doesn't support the
email program will not decode the attachment.
The attached file must be loaded into a program to be viewed. For example, if the attached
document was originally created in Microsoft-Word you need Word, Open Office or another
modern word processor on your computer to work with the document. Most modern software
suites can import documents from other suites.
Most modern email programs work hand-in-hand with your operating system to try and open the
correct program required to view the document sent as an attachment. This is done by matching
the file extension such as .jpg, .gif, .doc, etc... with a registered file type.
Viruses can also be transferred via email attachments. Because your email software handles the
decoding of programs sent as attachments it is easy to infect your computer simply by opening
an infected attachment. Always check email attachment with an anti-virus program before
opening them.
There are several reasons why an attachment will not display properly or at all:
1. the encoded file is corrupted and cannot be decoded. This is usually due to damage in
transit and happens very seldom these days.
2. the encoding type is not supported by your e-mail program and so the file cannot be
decoded back to it's original type.
3. the attached document was created in a program that you don't have on your
computer or is not a registered file type.
4. the email program has an option set which automatically locks attached files
When sending an attachment you should think about whether the intended recipient has the same
program on their computer. When you are sending an attachment to someone you should always
use a standard encoding process (the one that comes with your email program is usally best) and
send the document in a format that the recipient can view. If in doubt, ask them first by email.
Macs users should be aware that most Windows user won't be able to decode a binhex file.
If your email software automatically locks attachments and you want to view the attachment you
can change the programs settings by modifying the Preferences or Options.
If the formatting isn't important it's better to copy your the text from the original program and
then paste it into the body of a plain text email message rather than sending an attachment.
Everybody's email software can read this 'plain text' ASCII format.
There are thousands of news groups covering as many topics. Some are moderated, meaning
that a person who has knowledge or an interest in a certain topic will receive the message and
read it before posting it. This keeps the discussion on topic. Most are not moderated and the
discussion can go anywhere but it can be a great way to get a quick reply to your questions.
As well as the public newsgroups many organizations and companies will provide discussion
groups of bulletin boards that focus on areas related to their own topics. This can be a great spot
to find out more about an organization, find a solution to a problem you are having and
participate in the discussions related to that company or organization.
One problem with posting a message to a discussion or newsgroup is that unscrupulous
companies mine the newsgroups for email addresses and then send unsolicited email (spam) to
the poster. It is recommended that you disguise your email address using your email software
preferences or the bulletin board settings.
Many newsgroups have a publicly accessible faq. A faq is a collection of frequently asked
questions that have been posted many times to a newsgroup. You may get a gentle reminder or a
completely rude and insulting comment if you post a question that is on the faq. It is acceptable
to post a question as where the faq is located and you may find that frequent posters will mention
the faq in their message.
Internet - Navigation
World Wide Web (WWW) is a collection of web pages connected together with hyperlinks.
Each document or page has a unique address that allows you to find it among the millions of
other documents on the Web. The address is called a Uniform Resource Locator (URL) or
sometimes a Uniform Resource Indicator (URI). When you chose a new link by clicking on it
or by typing it into the address field your browser sends a request for that document and
displays it on the screen. That link can be to a different section of the current document, another
document on the same website as the original or on another website anywhere in the world. Web
pages are designed using hypertext markup language or HTML.
Designing a basic HTML page is not difficult after mastering a few simple codes or if you are
planning a website you can have a Web Developer (send me an inquiry) create one for you. The
key to the web are the links to different, useful or interesting pages. Internet user collect links to
their favorite sites or web pages and add them to a bookmark or favorites list.
Receiving information from another computer is called downloading. When a user chooses a
web page to go to the browser automatically downloads the information from the page and
displays it on the users computer screen. The user can also choose to download specific files.
Sending information to another computer is called uploading. To place a web page on a website
the developer must upload the file from their computer to the ISPs server.
Being Online means being connected to another computer, whether that computer is your ISP,
your friends computer across town or a remote office computer, through a modem, or digital
connection. Going Offline means disconnecting your computer from the remote connection.
Internet - Other
File Transfer Protocol (ftp) allows users to transfer files and documents from one computer to
another. There are a few different software programs that will make this process quite simple. If
you are designing a website you can use ftp to update your website.
Computer users can also use an ftp program to download files and software off the internet.
Many companies and universities offer ftp sites that contain software which can be downloaded
and used on your computer. A search for 'ftp' will display dozens of ftp programs that can be
used to download software.
top
Internet Relay Chat (irc) allows users to participate in real-time discussions with other users
through the Internet. A user logs on to an irc site and then types messages and replies to others
messages as they are written. Often an irc discussions has a topic and users will join to discuss
this topic. Other irc discussions are free flowing and regardless of how centred the discussion is
it can take some time to sort out the different threads of discussion in a busy irc. They are also
used for online conferences with a famous or knowledgeable person contributing their time to
answer questions and present information.
Along the same theme are online game sites where Internet users can compete against other
users on the Net.
top
Instant Messaging software, such as ICQ and MSN allows users to find friends and
contacts through the Internet and communicate with them in real time. Users maintain a list of
contacts which the software will notify when they are online and contact is available. To use an
instant messaging service it is necessary to have and register software available on the Internet.
Instant messaging allows you to chat, send messages and files and various other features but only
with people you choose. Often the software and registration is free.
Some services also provide the ability to connect a microphone to your computer and talk to your
contact. Your contact can talk back using their account and software which you can hear using
the computer's speakers or an ear attachment
Internet - Search
If you are looking for a specific company or organization try typing www.company name.com
into the address bar first (e.g. www.grassrootsdesign.com). If it is a "country specific"
organization try ending with the specific, 2 character country code rather than .com (click here to
display countries and their code).
Search Engines make finding things on the Internet relatively easier. Search engines are run by
companies that collect information from the Internet, sort and categorize it and present the
information to the user based on keyword searches or through directory listings.
It is worth taking some time to learn how to make an effective keyword search as the amount of
information that these search engines provide can be overwhelming. It is common to be provided
with 10s of thousands of references to any given search term. By narrowing your search to a
specific phrase you can target your searches more effectively. Many search engines require that
you enclose a search phrase in quotes (e.g. "the cat in the hat").
Different search engines will display different results and sort those results differently. If you
don't find the information you want on one search site try another. Some search companies offer
meta searches which are compiled from a number of different search engines' results.
Most search sites offer directory listings as well. The information is categorized in a hierarchy
from general categories to specific categories. To find a specific web site follow the links down
to the category that matches your interest.
The results from a search are a list of pages with links to the documents that match your search.
Each search engine has a different way of displaying the results but generally you will see a list
with the name of the organization or title of the page. You may also see a short description of
that web page. Clicking on the title will take you to that page.
Though there are hundreds of search engines on the Internet there are only a couple dozen that
the majority of people use. If you choose "customize" in your browsers search tool you will see a
list of some of these search engines.
Website Search
As well as Internet searches many websites offer a website search feature to help visitors find
information on that specific website. Generally there will be a button marked 'Search' beside a
text field. Enter your query to display links to the pages that match.
ECommerce
Electronic Transactions on the Internet are becoming common
place. Books, software and even groceries can be bought and
sold with the click of a button (and a credit card). The biggest
problem with doing business over the Internet is the lack of
common standards around security. There are dozens of
different standards involving hundreds of different methods.
The Internet, by it's nature, is an open system which means that
information can flow freely from one computer to the next.
Information transmitted through the Internet can be intercepted
and copied as any point along the path. For this reason it is not a
good idea to send confidential information like credit card numbers through the Internet the same
way you might send an email to a friend. In order to send confidential information you must be
sure that your private information can not be intercepted along the way.
The most common method is Secure Sockets Layer (SSL). A transaction computer with an
order form for the product that you wish to purchase creates a secure connection which ensures
that all the information that you send to it is not accessible to anyone else. If information from a
secure connection is intercepted it will be encrypted making it useless to persons with malicious
intent.
Most small businesses will not find it economical to setup their own secure server and can
purchase a service from a third party which offers a transaction service. These services vary but
all require a setup fee and some form of payment for transactions performed on their secure
server. This payment can involve a monthly fee, a transaction fee, a percentage of the
transaction, a credit card company fee or a combination of some/all of these fees.
When considering hiring a transaction service a company should decide whether they want to
setup their own merchant agreement with the credit card companies or pay the transaction
service to use theirs. Some transaction companies retain a percentage of receipts for security
deposit until a proven transaction record is established anywhere from 30 to 90 days. Some allow
limited outside development of the forms used on the secure server and other insist that the forms
be developed in-house.
Another model is the Secure Electronic Transaction (SET). This model requires that the
customer download and install a wallet into which they enter their password protected credit
card information. The SET system development was promoted by the major credit card
companies to provide a safe and secure environment for online transactions.
The SET "wallet" model requires that the customer obtain a Digital Certificate from a Certified
Authority (CA) which they then use to perform the transaction. The Certified Authority, usually
the bank or financial institution that the customer deals with, verifies the validity of the
Certificate to the merchant. The customer enters their personalized password to verify that they
have the authority to use the Certificate and the transaction is made. This model allows
customers to use their credit cards to purchase items from merchants without transmitting their
actual credit card details to the merchant.
The merchant uses their merchant
agreement with the credit card company to
complete transactions, process refunds and verify the validity of the customers credit card
information.
Though still in its infancy, many billing companies have begun Internet transaction projects
using the SET model to allow their customers to pay their bills, check their account status and
much more.
This document marks the end of the section on the Internet. Try the Internet Quiz or click the
Next button to skip it!