Professional Documents
Culture Documents
McGraw-Edison SPI Lighting Power Drawer CCL Series Brochure 1982
McGraw-Edison SPI Lighting Power Drawer CCL Series Brochure 1982
McGraw-Edison SPI Lighting Power Drawer CCL Series Brochure 1982
oilt'l la{o a a
I r) I/rll -
I rIT I I/l N /rl t
I a*
TABLE OF CONTENTS
Drcwet .)11
i/fl 4Q 6)6-)
Powet A New concept Application Application
Featrrres 1 UCl, ln Area Lig htinq Dara (3(3 , ll Dara
Power Drawer
Ballast Assembly
f< 4Al Application
UL--/ Photometrics
Orderins
lnformation
6t)4)
/4()) f1@)
Prl<
orderins
lnformation
Application
Photometrics I 18 Power Drawer
Floodlight
Orderins G;)=)
lalormalion (1U
4)/a
Q?))
Nominal
Loading Data
Power Drawer
Apprication
{@ flg Floodlight
Benelits
*-s[?t[;i 28 4)7/
ai,U
Nominal
Loading Data
Power Drawer
Orderinq {l<l 6),6\ Application Sisn Lisht 6)G) 4)@
lnformation ll L ZfUl Photometrics Fealures (3<) \Y\:, SPecrtrcatrons
Sports Light
Sign Light
Floodlight
Power Drawer ballast assem bly ! Allows installation of housing, fl Three housing sizes to accom-
conlains all eleclr,ca' components without weight of ballast assembly. modate ballasts for 100- through
I Siides into luminaire housing I Simple change of ballast drawer 10O0 watt mercury, 70 through
and connects to power supply with assembly permits accommodation 100o-watt h igh-pressure sod ium
F,olarized, quick-disconnect plug of new, improved HID light sources and 175- through 1soo-watt metal
assem bly as they become available. halide lamps. Ballasts available for
120- th rough 4BO-volt operaiion.
! Allows a single housing to Lr Multi-tap ballasts available in
accommodate a variety of lamp and
ballast types. Futu re upgrading most wattage sizes tor 120-, 208-,
easily accomplished. 24A-, 27 7 -v olt oper aIion.
rl lnsures safety and reliability-
Power Drawer ballast assembly
separately UL listed for f ield
interchangeabiliiy.
POWER DRAWER CUTOFF
SITE LIGHT BENEFITS:
rl Uniformity for maxirnum
visibility.
tr Preclse cutoff, front and rear,
eliminates light pollution.
I High beam utilization.
tr Lower mounting heights.
tr Fewer poles and luminaires.
ll Low Effective Projected Area.
(E.PA, )
POWER DRAWEB
SITE LIGHT CAN:
:l Provide security liqhtinq with
control ed beam, sharp cutoff.
tr Light large areas with controlled,
adjustable, sharp cutoff lighting
tr Provide un forni, controlled,
building flood ighting.
,ft""t',,,
. \'...
Larqe areas req!irlns conlrol ed qlare tree iAhtins
I
003 004 0r1 022 a25 a21 016 014 015 002 003 006 013 013 014 015 011 021 oo0 002 002 008 013 016 020 0r7 0r4 008
oo4 ooa 030 040 041 0,12 025 024 o25 003 005 017 022 02r 033 024 041 042 000 004 004 025 02.1 031 035 028 020 011
012 029 067 068 101 079 056 048 037 007 017 041 038 061 069 037 085 060 oo7 029 057 041 075 059 046 028 013
r + 0.250 + +0.250 + + + + + 0.250
oo0 4 r3 4 79 3 31 3.12 2 42 1 A4 769 362 186 097 aaa286288227 224 146 132 78a 4Oa 210 110 ooo 5 74 7 88 5 05 4 99 3 32 109 434 165 074 048
002 004 007 012 014 012 008 007 oo8 oo0 ooo o04 010 a17 a2a a17 016 0ll 005 001 001 003 005 007 007 ooa 007 004
oo3 007 017 023 024 031 013 017 017 000 oo5 007 027 032 033 033 024 014 004 000 002 002 oto 008 013 017 015 012 004
ooa 023 043 042 0a2 063 035 033 026 013 032 05a 055 073 05a 040 016 011 o00 oo3 012 023 017 040 035 032 015 006
+ + 0.250 r ! + +0.250
o7t 053 037 000 113 055 020 015 000 011 o!5 052
ooo 3 a8 3 6s 3 20 2 72 2 24 171 571 241 123 463 ooo 4 la 5 51 3 42 3 39 2 48 979 333 Oa5 053 035
000 ooo 005 003 or3 019 022 025 O23 02r I
000 012 025 042 055 107 094 O73 057 042 FOOTCANDLE
+ + t 0.250 /+\ + I + l WATTAGE TYPE DESIGNATION LUMENS FACTOF
000 039 073 093 I19 0a5 057 175 Mera llalde MvF175/u 12000 522
A&a_1 ri5 su'er MetaLHaride Ms17s/HoR rs,oorJ b5z
000 115 070 70 Io LUo "800 )oJ
+++1.00 too Ps LU oo q.' 00
145 0a2
ca c-1 4oo Meta Nalde MVB400/U 32 000 400
NOTEr lvlultiply all footcandle values on plot by factor shown {or different lamps.
Foolcandle Plot G
lOOO-Wati H.PS., LU100O, 14O,OOO-Lumen Lamp,
60' N,4ounting Ht , 45o Tilt Angle, 30'Grid
lncrements. Cataloq #FC3288S.
Footcandle Plots A-1 thru G-1-the same as A thru G, except 4 units per pole, oriented 9Oo apart.
-0.250 + + + + + + r + + +t1++++1.+++
r 7-ra-]3F-r-Z-L--159 145 128 lot 069 044 o2a o2s 58 12A 099 056 022 029 07r 07F 071 063 o59 058 053 O4A 038 O2a 019
I 0 250
127 1A2 A81 056 038 022
+ tPo + + A + \ + + + r + t I (J.sOO -\ + r. + + +
3a r20 099 069 r18 0a1 04a 024
.. uw \ A + t + \ + )+ I \ + + +
169-rF*gr 48 1 15/767 4a4Y85\43 101 068 1 27 1 3l! 27 1 A1
1 690116
16 292 247\S2 12A OA2
+ | + \+ 1( + + \+ \r + + + zru(J + 1 { ++++
+ + .N + + | \,^nX A I ,
2 27 2 4V 2 27 r 4 1 01 \78 761 3dia 2rb r28 076 r 44 14&l 44 976\475V64 416\69 264\15A Oq2 32033F32027r
320271 rFl 110\90\e3r\27 o5s
1 o3a
+ l- + ++ +t+ +\+l+l+ + +
.ou" J,,
I I
ou
+ +
-iN,+\r oYl,:\;\r"i\,;
r01 115
+ l+l +l I ";+
202241202\30 6,f8\475 690 525tlls
+ t | \+ + \<i\ + l+ l+
172 096
+
50654F5063OO15]..fu1
5063041 6fu 3ltj tb4 osg
+ t + + I +\ + l+ l+ j +
o37
3915?P391
391 2552151
2 55 2 15 r 7\ 1 4a d16 !931159 O87 2 55 3 7p 2 55 I 79-t3O 976 1 03\648 al54 1b1 1O3 5 63 7 slt 563328307271
5 63 3 28 3 07 2 7r F39 342 r!9.063 043
+ t r - + +\ | lrl+l+ F + + r + \ + I t+ l+ l+ + + t -++++ + + +l{ l+ l+ r +
6 09 i0 lt o 09 3 sr 3
5093S1 308227
0g 2 27 i\69 7bb 136 177 o93 3 7a 6 8P 3 7a 2 55 2 02\l 44 1.27 150 302 2d4 1Oa 937 I .3 f 9.37563506320
9.37 5 63 F 06 3 20 !9d 408 tbt o7i 046
1A 1522 3 412 47 1 86 77a 367 186 097 6 82 3.72 2 47 1 60 1 33 794 411 210 1 10 117 7 57 5.47 3351 10 439 168 075 o4a
Footcandle Plot A-1' Foolcandle Plol B-1 Footcandle Plol 'C-1
2so-Watl Metal Halide. MS25O/HOR. 23.0OO 15o-Watt H.PS , LU150,16,000-Lumen Lanrp 400-watt Metal Hatide, t\,4s400/HoR, 40,ooo-
Lurnen Lamp, 25'Mountinq Ht., 47.5o Tilt 25'Mounting Ht., 47 50 Tilt Angle, 12.5'crid Lumen Lamp, 30' Mounting Hi , 45o Tilt Angle,
Anqle, 12.5'Grid lncrements, Catalog #FC1158S. lncrements, Catalog +FC1838S. 15' Grid lncrements, Catatog +FC2168S.
I ++++++r.++++ +1+++++1.r++
I ! r r 0o 0a. 0o 0a 0/o ota
0r4 048 0 8 048 oab olo o4q oao o, . o .o o. . o 049 058 049 040 032 024 021 022 021 014 00A
0250 r + + + + rt + b250 + + + + + + -1 +
244 21p 239 204 175\{31 095.067 026 026 022 085 0a9 085.077 0a9 092 08a 073 o4a 030 {)17 040 070 063 050 030 021 c)oa
1
iTiT*j{'\"iY ""1"': "':
63 1 Z8_1 63 I 4l I q/1 62Q 42\23q 095 067 045
314 335 314 2f5-.231 .t6i 131 071 050 022 010
+ + +\rt1\r
2112 292141\4
2 141 ;#.,i
)+\+l+ +
iO7 372629301 141 0a6 050
t\,/1\tt
+ I l\ rnn,
22424022A1F7 1Od 720 38! r&7 070 024
+ | + l+ q.,/-+\ +\ l. + +
\ \,
017
+
3 08 3 0! 3 08 1 & 854 7Dl1 04\41D 1V5 097 053 .1282631. 3.25 3 61 3 2s 1 17 905 1 08 127 b3l OAO 032 022
r I + +\+ + +l{ \r + + + I + \: + + \+ \+l + + +
3445011 3 44 2 06 1 44-|64 r41 I9A.2C4 111 .060 630389263 1 3 92 5 0P 3 92 1 75 I 77 1 5t 745 tTTlOlA O4a A29
I I . + + +\ + l+t t r + ++1 I I -r+++ \S I t,
489344304214
4 89 8 6F 4 89 3 44 3 0a 2 t4 163 564123D 125 065 840630428 7 29 10{ 7 30392 3 25 2 28 DC6 3r4 h6?.049.033
8 655 01 3032 29172 5a4 245 123 aE3 137431454232 a61 276 089 053 034 10 4 16 t I 0 4 5 07 3 67 2 49 9A4 335 0A6 053 035
15 75 2.TA
20 10 I 56 225
17rT90'1-u t 47 r 05 654 496\291 155 104 066 25 12.5 100 400
I + +\+ + + + \ I l+ + + 30 15 69 100 274
232241232169 939\606 654 3Ba 2N 12a O77
35 175 51 204
.10 2O .56 156
3 85 4 5{ 3 85 2 251\e2 939 1 05\ 511?70\l53 0A6
:n
+ I +++
+ + +\ r +t +l +) + +
45 225 124
4 65 6 50 44652482251
65 2 48 2 25 I 691.47 651 122 t75 097 50 25 36 100
+ + ++++
+ + + +\rt+t+t+ + 55 275 83
7921247924653A52.321(77 isr S7 187 1OO 60 30 .69
65 32.5 59
1266 5r4 54 247 190 a40 407 210 r tO 70 35 51
75 375
Footcandle Plol G'l
80 40 .39
iO0O Watt H.PS , LUlOOO, 14O,OOo-Lumen
Lanrp, 60'lVounting Hi., 45o Tilt Angle, 30'crid 85 425 35
lncrements Catalog #FC3288S. 90 45 31
95 475 2A
100 50 25
NOTEr Multiply all iootcandle values on plol by taclor shown for different heights.
SITE LIGHT APPLICATION TABLE
FC2166S
30'
35
140
164
568
4.24 : 4.67
MH 4A 146
40 144 4.02
45 207 6.37
MVR1000/11 107400 FC3laaS 50,
55
234
253
5.14
4.27
355
I
20 96 495
LU150 16000 FC123aS 25' 124 317 B
30 219
25 117 5.69
30000 FC125aS 30, D
LU25O/S
35 164 292
35 158 5.25
NOTES:
1. Cutoff: Allapplications; occurs at 80o above nadir'
or less.
2. Unilormities: All applications;
max/min ratio is 12:1 or better, avg/min ratio is
3:1 or better.
3. lllumination Levels: Are average initial horizontal
footcandles, plotted in data area ol plan drawing.
4. Conversion: lf lower levels o{ illumination are
desired, use height desired and reduce lamp wattage. LT ANGLE
Calculate new pole spacing. EXAMPLE: 1000-watt
M.H. on so{t. pole ht. and 23ojt. spacing=s.14 f.c.
Same height is desired, but lower illuminalion level is
desired, reduce wattage to 4oo watts.
(A) Determine maximum allowable pole-spacing
Determine mtg. ht. ratio, from table for new lamp
=4.67. N.4ultiply ratio by desired mounting ht.
of 50 ft. 4.67 x 50 Jt.=233.5 {t. max. allowable
spacing.
(B) Obtain new lam p-illumination level from basic
plot results from table,4O0W M.H. at 30 ft.-
5.68 f.c. (Plot C). Multiply illumination-level by
mounting-height conversion-factor as shown in
table on page 9. Mtq. ht.-30 lt.-1.O. New mtg
ht. of 50 ft.=.36 factor. Multiply original 400W
M.H. f.c. level by the new factor. 5.68 x .36=
2.O5 f .c.
(C) Result=4oow M.H. mtd. at 50 ft., spaced 230 ft
apart=2.05 .c.
f
(D) Unrformities do not change.
5. Lower wattages in same housing at same height
t-
and spacing, multiply footcandles by lamp proration
factor as shown in table on page 8. EXAMPLE: LU]50
at 25 ft. and 120 ft. spacing=3.171.c. New lamp=
LUTO at 25 ft. and 100 ft. spacing=.363 lactor x
3.17 - 1.15 f.c.
SERIES lOOO
SEFtES 2000
SERTES 3000
I
B
Series 1000 15 12 7
Series 2000 20% 9%
Series 3000 27% 22 13
3702 32 479 431369 723 319.169 099 000 000 3 64 3 57 2 t7 468.216 112 051 560 1 80 4 5a 3 70 1 64 657 2A2 .121 A61
000 006 01 112 054 026 000 000 046 092 125 207 048 019 000 004 138 1af^147 101 054 027
++r- ++ +++ ++
27 Q6A a22 001 005 0l 061 014 001 025 115 057 023
002 017
r-+ ++ ++ + 0.500
055 032 .0lo 034 777 514 a44 424 005 048 27 052 031
1.00 +
i9 613 o7i 058 067 035 025 093 066 034
024 096 Q41
+/+ ++ +
071 087 049 149 A4 7 1 1a 9S5 085 048 071
+
to2 055 097 057 211 089 050
+ +l
113 060 543 I14 065 3aa 100 055
465 167441 3 531 48 562.244 117 062 63727055647a186 719 264 123 069 475 1 63 4 25 3 35 1 38 514 214 103 056
,;n#*;x."\.i J ,"i
""i
4683792 231\'19 934 ,132 J89.084 045 4 22 2.47 1 :o.113
1s4695221 9A1 35a 163 092 052 a 95 4 55 I 60 807 .294 099 040 020 12.1 5.38 2 01 654.241 088 037 025
Footcandle Plot A-1 Footcandle Plol B-1 Footcandle Plot C-1'
2so-Watt [,1etal Halide, MVR25O/U, lsGwatt H.PS., LU150, 16,000-Lumen 4OO-Watt Metal Halide, MVR4Oo/U,
l g,soGLumen Lamp, 25' L4ounting Ht., Lamp, 25'Mounting Ht, 15o Tilt Angle, 32,OOO-Lumen Lamp, 30' Mountinq Ht..
20o Tilt Angle, 12.5'Grid lncrements, 12.5' Grid lncrements, Caialog #FR1835O. 2Oo Tilt Angle, 15'Grid lncremenis,
Catalos +FR1155Q. Cataloq *FR2165Q.
++++ ++++
o9o 134 130 106.064 035 021 012 039 050.063 060 040 025 013 006 oaa 120 116 096 062 034 O22 012
+{0.25q++++ ++0.250++++ ++O]2sO+++++
1Ft'tC4s b1 .137 o7 4 a41 .a2o a21 oag 128__l5f- 121 064 030 0i2 013 1aJ-4ig -1S4 125 074 A42 A22 022
+++++ +++++
16tr 345-38s\3o4 168 092 044 041 035 53 o8a 046 042 034
++++
11{) 092 074 064 .104.oaa 074 062
4122421
"*.-;X%*ii"-
.ol ,Y"XA
147 5092
4.96 3 91 2.241\7.746 50a\349.219 t2l
'oluoi,o1l,
41
"; ";
I I A 5 14 2 06 722 338 164 A71 Q34 1476042.36 708 243 093 046 029 1124952Q7 806 435 224 093 039
Footcandle Plot'D-1' Foolcandle Plot E-l' Footcandle Plot F-1'
2so-Watt H.PS., 1U250/S, 30,00O-Lumen 1OOo-Watt Meral Halide, L4vR1ooo/u, 400-watt H.PS., 1U400, 50,o00,Lumen
Lamp, 30't\,4ouniing Ht., 20o Tilt Angle, 107 8OO-Lumen Lamp, 50'Mounting Ht., Lamp, 40'Mountlng Ht., 2oo Tilt Angle,
15' Grid lncrements, Catalog #FR2255O 15" Tilt Angle 25'Grid lncremenis, 20' Grid lncrements, Catalog #FR2265O.
cataloq +FR3185O.
NOTE: Multiply all footcandle valLres on plot by tactor shown for different heiqhis
AREA LIGHT APPLICATION lABLE
NOTES:
1. Dislribulion Types: Curves AB C, D & F=Type lll,
Med. Semi-Cutofi
Curves E & G=Type lll, Med , Cutoff.
30'
2- Cutofl: All units cutoit all light at 87o above nadir or less.
(,1H
3. Uniformities: All appl caiions;
max/min ratio is T2:l or better avq/rnrn ratio is 3.5:1 or
E better
4. lllumination Levels: Are average initial horizonial foot
candles plotted in data area oi plan drawing.
5. Conversion: lf lower levels of illuminatron are desired
25
D use height desired and reduce lamp wattage. Calculate
new pole spacing.
EXAN,4PLE: looo watt l\rleial HaLide on 50{t. pole ht. and
l6dF. spacing=5.s3 f.c. Reduce larnpwatlaqe to 4o0 waits.
la, Deler m'rc ma'in.ur al owab e pole spdc.nq.
Determine mtg. ht. ratlo from table for new lamp=3 67.
Multiply ratio by desired mounting ht oJ 50 ft.
G 3 6/ x 50 lr.-18J 5 'r r a) alrowdbre spacrng
(B)Obtain new lamp illuminaiion level irom basic plot
results f rom table ai left, 4O0W M.H al30 it.=5.67 f .c
lPlot C). N,lultiply illumination level by mounting
height converslon factor as shown in table on
frr
ft =.36. N,lultiply oriSinal40OW Nl.H. i.c. level bv the
new factor 5.67 x .36=2.04 i.c.
(C) Result=aoow l\,1.H mid at 50 it , spaced 183 Jt
l-r* + apart-2.O4 f c.
(D) Uniforrnities do not change
6. Lower wattages in same housing at same height and
Fr+i""
spacing, multiply footcandles by lamp proration factor
+ { as shown in table on page 14. EXAMPLE: LU150 at 25 ft.
and 90 ft. spaclng=4.83 f.c. New lamp-Ltj70 at 25 ft.
t-- trt l l'1"0'o.'
oo
\ and 90 ft spaclna=.363 iactor x 4.83=1 75 f.c.
L -t J
ROADWAY LIGHTING HIGH-PRESSU E SODIUM
- R
60 40 400 200 170' 151 250 200 135 113 15. 110' 80
COLLECTOF 48 35 250 2oo 120 152 250 2oo 146', 1.25 150 140', 75
36 30 i3a 150 150 5. 120' 114
4a 35' 250 2an 145' 125 15. 140' T5 179 60
LOC AL 36 30' 150 12a' 150 150 110' 129 150 151' 90
-i-'r
150 5. 100' 100' 179 123' 146
I
" r
-r _:_r
I [M
NOTES:
1. Luminaire Till Angles, Mounling Heights And Spacings have 4. Lamps: All are high-pressure sodium, as folLows:
been optirnized to provide low glare, proper uniformily and illumr- 4OO watt LU40O at 5O,0OO lumens, 25o-watt Lu250/S at 30 0OO
nation levels. Using closer or wider spacings, or different mounting lumens, lsGwatt 1U150 at 16,000 lumens.
heightsand tiltangles, w llchange illumination levelsand unlformities. Toutllizedifierentwattages,refertolampprorationtableonpage
AIe r t al dverdge -o'rlonral 'oolcandlaq on la d: follows
2. llluminalion Levels:
roadway suriace.
400-\rvatt-plol F proraiion factors,2so watt plot 'D iaclors. 15G
3. unirormiries: Arr roadways=s:1 avs/min , excepr rocar residentiar . li'l;:::;:":"ji:;or unit rocared 2 rt. back or curb I ne.
streets wh ch are 6:1.
CATALOG NUMBEF (1)
SERtES 1000
F81025 FR1025T FF1O25G FR1025Q FB 1O25lvl 100 {3)
FR1045 FRI O45T FR1045G FRl0450 FA1045M 17s(3)
F81055 FR1O55T FB1O55G FR10550 FR1055tV FRtO55W 250 (3)
F81155 FR1155T FB1155G FRt 1550 FRt 155[,4 [4etalHalide-CWA 250 (3)
FF1a]5 FR1A15T FB1A15G FR1815Q FB1A15M 70 (3)
FR1825 FB1825T FR1825G F818250 FR1825M Hlgh'Pressure Sod um-HR roo (3)
FR1A35 FB1A35T FR1A35G FR1a350 FR1A35M 150(3)(4
FR1255 FB 1 2557 FR1255G F812550 FB 1255M FR1255W Hish Pressure Sodium-CWA 250 (3)
SERtES 2000
FR2065G FB2065Q 400 (3)
FB2165Q Meral-Heli.le,cwA 4OO (3)
FR2255 FR2255T FR2255G FR22550 FR2255t\.4 FR2255W 250 (3)
Hlqh-Pressure Sodium-CWA
F82265 FR2265T FR2265G FR2265O FR2265t\,1 FB2265W 400 (3)
SERtES 30q)
FR30a5 FB3O85T FR3OA5G FB3OA5Q FR30a5Nl FR30a5W 1O0O (3)
FB31a5 FR3185T FF31AsG FR3185Q FB31a5[,4 FF31A5W lOOO (3)
FB32as FR3285T FB32A5G FB3285Q FB32as[,4 FB32A5W Hiqh-Pressure Sodium CWA lOOO {3)
ADDITIONAL ORDERING INFORMATION units {it horizontal luminaire supports with 2" pipe
(2%" O.D.)tenons. For loading data, see chart on
(1) Lamps not included. Use lamps designed for use pages 36 and 37.
in base down to horizontal or universal position.
Catalog number includes pole-top fitter. For mounting Ballast-CWA ConstantWattage Autotranslormer
options and accessories, see pages 33,34 and 35. HR-High Reactance.
(2)Ballast Available 120 through 480 volts. To order, Finish Bronze thermoset acrylic enamel.
speci{y voltage as catalog number suf{ix, e.g.: UL-Listed-Su itable for wet locations. CSA-Certified.
FR1025-120. All ballasts are high power factor. Modilications:
(3) Multi-Tap Ballast-Available with taps for l20-, 208-, Door Latches-Quick-release, springloaded latches
24O- and 277-voll input. To order, add suJfix 9 to available in place of door-retaining screws. Consult
catalog number, e.g.: FR1045-9. Other ballasts factory.
available. Contact factory Reposilioning Stop Allows fixture to be returned to
{4) Arc Rating of 55 volts. original position, after servicing, without reaiming.
Consu lt factory.
Pole Single units fit 2" pipe 123A" O.D.)and 3" O.D.
tenons. Triple units Jit 3" O.D. tenons. Quad units fit Accessories:
3" O.D. and 4%" O.D. tenons. Mast arm mountinq Photo Control-Available. See page 35.
Dimensions-lnches Description
Power Orawer Area Liqhis B c D E
FRONT VIEW
t<E-)
EXCLUSIVE BALLAST DRAWER
ASSEMBLY
n Stides into housing and connects to power supply
with polarized, quick-disconnect plug assembly.
n Provides flexibility, permits single housing to
accomrnodate a variety of lamp and ballast types.
! Protects investment by change of ballast drawer
assembly to accept new H lD light sources.
n lncludes properly positioned lamp socket for
maximum optical eff iciency.
n Accommodates ballasts for 1OO- through lOOO-wait
mercury, 70- through 1o0o-watt high-pressure
sodium, and 175- through 1500-watt metal-halide
lamps.
n Contains ali electrical components.
l: Simplif ies installation.
ADDITIONAL FEATURES
n Optics - Sing le-ref lector system provides maximum EXCLUSIVE TENON FITTER
eff iciency with clear lamps. n Fits 2-inch pipe (2%-inch O.D.)and 3-inch O.D.
n Housing High-strength, one-piece, lightweight, ienons.
istant cast aluminum. Three sizes
co rros io n-res n Gasketed wiring compartment has provision for
accommodate full range of H.l.D. lamp and ballast internal or external wiring.
types. E Calibrated, striated-knuckle and cast-in indicators
n Styling - Low-proJile housing with tapered, narrow for precision aiming.
cross-seciion and durable, dark-bronze finish comple- E Photocontrol accessory easily installed in wiring
ments architectural and environmental surroundings. compartment by removal oI knockout. Other inter-
! Accessories Complete line of styled mounting changeable fitters available for a variety of mounting
brackets. requ irements.
+r+++r+
000 000 0r7 034 038 037 037 035 o00 o00 016 030 033 032 031 029 000 000 004 006 021 032 033 032
r+-++++
000 006 039 055 056 056 054 049 000 005 034 048 049 048 045 040 000 004 007 022 0.15 051 048 045
+++++++ +++++l
000 029 oal 090 090 088 079 070 000 025 071 07a 077 073 066 062 000 00a 013 062 0a2 078 075 07s
' + 0.250- + + ' +++++++ + +r+0.250++
000 1,11 120 099 000 076 12a 133 128 i19 107 092 000 137 1 18
0250+ +
000 165 I r4 000 000 165
ooo1s9272211121 611 327 187 116 000 1 05 2 191 67 1 00 520 282 165 103 000r89350230169 9a5 513 279 165
+++++++ +++!+++
000 003 017 03r 041 044 043 041 000 000 00a 00a 026 039 041 034 000 000 000 000 0i9 029 030 028
++++++l
ooo 00a 034 056 066 066 062 057 000 .010 013 029 054 062 058 054 000 000 000 019 041 046 043 039
-+i++r+ +++++++ ++!+-++
000 029 073 102 106 10i 091 042 000 o17 A21 A76 099 095 088 085 000 000 000 056 075 07r 066 065
+ +0.250 + = + + + + r0250+ + +
000 57 137 114 000 031 09 150 128 000 000 069 t3t 124 r20 116 102
0.250
000 2 32]-.3La 343 254 86 13s 000 70 .000 1.18
90 171
ooo 1 ls 2 77 I 97 1 08 5a6 331 202 130 000 3 26 4 06 3 34 2 06 I 13 602 .324 189 oaa 1 452 A2 2 261 35 728 444 241 153
Foolcandle Plot G
looo Wati H.PS.. LulO00.14O.0OO-
Lumen Lamp, 60'Mountinq Ht , 600 Tllt
Angle, 30' Grid lncrements, Catalog
#F13281
Footcandle Plots A-1 thru G-1-the same as A thru G, except 4 units per pole, oriented 9Oo apart.
040 099 r16 117 109 097 079 064 073 093 r09 110 100 0a6 067 052 r05 1]2 126 135 112 125 lOO O77 OsR
+++- + I ' lo25o + + +
110 130 r6s r79 r70 r55 12.1 098 079 108 117 153 167 r57 140 107 080 067 16b tgt-:zo8 227 2'rs!r 69 123 090 077
| _,2+ +-r\ 0250+ + +
16f,,.X7 264 263 231 \41 132 107 086 279 3b.60-i5{ 306 2t\t5o 123 ioo
+ = +0500
80 r40 100 51p 624 Z14630 42Q.27a 215\r69 125
+ + j.00
"F r-qK"N'\'{
\s, r\s :ol
r zf-r.<2rxe r or
"i
,sz roc 1 78 2 5A
50 2 16 i:5.92^630
2161 39r 2r7 r3s
.++
350314r7 22p2872661Va ap5 460 264 153 093 .1 I2 3 36 2 16
++r-
3 78408 2 A7 t/62 8r5 898 207 117 073
5 05 2 93 r 5t 6| 327 187 |6 076 374222121 520 282 165 103 06a 654241 178 9a5 513 279 165 105
{199 11A r2a 137 l2A 114 093 076 rzlt 121 13.1 140 150 139 117 0S0 070 148 111 127 128 134 115 090 068 051
I r -! +0.250 + + +
r3b 154 l8lF+e+r+61 lao 143 11.1 093 r 143 108 090 t5B 171 19al?O9!,A9 149 10a 079 06a
211 259 3a3 321 292 23tN1a2 143 r r4 T6 143 117 t4h 277 3A6 340 264 M7 131 10a O90
527 51.1 484 5a5 525
2482431
271341324179 gsb 5?t 3o3lta4 lla 5 54125 2 43
4ri851934r
519341 1pl
l q)1 4ta 25' ts4 099 90055828a 171 111
1aa2 7-4 1 29 630 344 210 135 091 827 414225113 6A2 324 1A9 121 522271 135 T2A 404 241 153 142
34000
30'
35 600
1TO
194
239
: 5.67
MH 541
?16
45 243 430
5o' 274 3.47 E
MVB] OOO/U I10000 FL31A1
297 2aa
60 324
20 124 2.41
r6000 160 129 B
I 1i150
30 192 a9
25 158 2.32
30" 1S0 161 o 6.33
LLt250/S 30000 119
35
35 214
40' 240 146 ,,
50000 FL2261 45 2TO
HPS 119
50 300
55 330 .99
50 267 346
55 293 319
LU1000
60'
65
324 264
: 533
70 373 1.94
a0 427 150
100
NOTES:
spaclng.
. Dislribution Types: Curves A, B & D-lES/N EMA
{B) Obtain new lamp-illumination level from basic
1
2. Cutofl: All luminaires are classilied as lloodlight, i.39 fc. (Plot C). Multiplv illumination level bv
non-cutoff. mounting height conversion factor as shown in
3. Uniformities: All applications max/min ratio is 12:1 table on page 21. Mtg. ht.-30 ft - 1 0 Newmtg
or better, avglmin ratio is 3.5:1 or better' ht. of 50 Jt.=.36 factor. Multiplv original 400W
M.H. f.c. level by the new factor. 2.39 x .36=
4. lllumination Levels: Are average initial horizontal .86 f .c.
Iootcandles, plotted in data area of plan drawing' (C) Result-4oow M.H. mid. at 50 ft., spaced 280 ft.
5. Conversion: lf lower levels oJ illumination are apart:.86 f.c.
desired. use height desired and reduce lamp wattage (D) Uniformities do not change.
Calculate new pole spacing EXAiMPLE: 1ooo-Watt 6. Lower wattages in same housing at same height
M.H. on 50 ft. pole ht. and 27O tt. spacing=3.47 f c . and spacing, multiply footcandles by Iamp proration
Same height is desired, bul lower illumination level is factor as shown in table on page 20. EXAM PLE:
desired, reduce wattage to 4o0 Watts. LU150 at 25 ft. and 160 ft. spacing=1.29 f.c. New
{A} Determrne maximum allowable pole spacing. lamp:LU1oo at 25 ft. and 160 {t spacing= 594 factor
Determine mtg. ht. raiio from table for new x 1.29-.77 t.c.
lamp-5.67 1\.4ultiplv ratio bv desired mounting
ht. of50 ft.5.67 x 50 fl.-283.5 {t max allowable
t f -r -1
Ttr"-"^-.,1-r
rl
t- 1
lxl
i'-"i
I
LT ANGLE
r -t-----t
I tll
f-txl --1
-.i
I
-l. *1* J
Series
ADDITIONAL ORDERING INFORMATION 10OO
il
*l.l-
B c D E
15 12 a 7 3k
20, 16y a 9% 4%
27b 22 a 13 6%
WALL MOUNT
B c D
15 12 16Y2 a%
2A)1 16l 2a%
271t 26% 1A%
Assembly
Power Drawer
!| Assembly
/.Ballast
Filter Gasket
Ballast Capacitor
Die-Cast Aluminum
Tempered Glass
Door Frarne
fi= 00 0o
a
IU
,il,4 /,
a
tu
-J _l
C, \ o
z z
--., Oo
\... -)
l
)i )
o"]
).,
o
tr
\ ,/\ o
F
tc
tu ) cc
I]J
\N
'\\\\
\\: oo 00
HORIZONTAL ANGLES HORIZONTAL ANGLES
BEAM TYPE BEAM SPREAD MAX. CANDLEPOWER TOTAL LUMENS TOTAL EFE
oPTtcs LAMP
400 tv H 2 x3 190H x 36oV 137,O40 21,129 62 1%
rL2162F 5 5
FL2163F 3 3 [/etal Halide-CwA 400(3)
FL2164F 2 3
FL2252F 6 5
FL2253F 3 Hlgh-Pressure Sodium 25O(3)
FL2254F 2
FL2262F 6
FL2263F 3 4 High'Pressure Sodium- 400(3)
FL2264F 4
FL62A2F 6 1
3 High Pressure Sodium- 100o(3)
FL6283F 5
FL6284F 3 CWA
"Based on use of clear lamps For iypica I phoiometric data , see page 26.
For other available bearf spreads, contact factory
Assembly
Polarized Quick
Filter Gasket Disconnect Plug
Knuckle Locking Bolt
Door Frame
Tempered
Glass Lens
Unlversal Mounting
Bracket
r l+ t+ + + -t + I i I +
14 9 206 59 159151 300 4 61 7 74Aa60 860 74 AE2 7 4B 4 6AA
131 1a 2 265
+
143 19 a 7A 6 74.6 62 5 a 249
+ l llll+l I rI + +
14523335 7s0 7662t162507357 233 145 20032 3493 70 291 5 E157(]2 4933232AA 292 47a1191A2 133 133 102 71947A292
Foolcandle Plot A Footcandle Plot 'B' Footcandle Plot C'
175 Watt Clear lMercury H39KB-R175, 2so-Watt Clear Mercury, H37KB-R250, 175-Watt lV etal Halide, [,4S17s/HOR
7,45GLumen Lamp,4 Fi. Distance Set- 1O,3OO-Lumen Lamp,4 Ft. Distance Set- 15,OOO-Lumen Lamp 4 Ft. Distance Set-
back, 47.5o Tilt Angle Catalog +FS1048 back, 47.5o Tilt Anqle. Cataloq #FS1058 back, 47.5o Tlh Angle. Catalog +FS1148
Avg. fc. = 27.8 Max/N,4in unif. = 5.6:1. Avg. fc. = 38.4 Nlax/Min unlf. = 5.6:1. Avg. fc = 56.0 Max/[,4in unii = 5.6:1.
1'Grid lncrements. 1'Gri.l Increments 1'Grid lncrements.
{r50.or++++
32934343.1 329 522
+ + +++105+l+r
54 r61 I6A0 /4 61 A 1 349432497 56 I 56.1 5404 432 349 720 I 93 3 9C g1rf 103'99-q 93 3 a4 1
+ to.o+ + I ++ + !30- +
24239547 395 282 649 113 i19 r19 r13 r
+
119 175 175 139 \1 267444 00 r00 8\1 267 446 195 195 r 5
+l+
14AT21 1la 156 204 2D4 156 11a 721 44A 2a245s69s98i t2a 128 9A 16954552a2
Foolcandle Plot D Foolcandle Plol E' Footcandle Plot F'
250-Wan tvetat Halide. llf s250/HoR. 1so-Watt H.PS , LU150, 16,OO0-Lumen 250'Wan H.PS., LU250/5, 30,OOO Lumen
23 00O-Lumen Lamp,4 Ft. Distance Set- Lamp,4 Ft. Distance Setback, 47 5" Tilt Lamp,4 Ft. Distance Setback,45o Trt
back, 47.5o Tilt Angle. Catalog #FS1158 Angle. CataLog #FS1838 Avg fc = 55.2 Angle. Cataloq #FS1258 Avq fc. = 109.6
Avq. ic. = 85 a Max/Min Unif. - s.6:1 Max/MinUnif.=52:1. Max/Nlin unif. = 5.1:1.
1'Grl.l lncrements. 1'Grid Increments. 1'Grid lncremenis
FOOTCANDLE
PLOT WATTAGE TYPE DESIGNATION LUMENS
A 100 Merc. H3AHT-R100 3.900 523
. l/h Vt VvR /) U 2000 800
Hffi
178 120 90 72
120 97 81 61 49
from the sign face, for signs 6 feet 250 WATT 10,300 91 63 38
t-t37KB 4250
through 15 feet in height, and five 75 62 52 32
56
leet (D) for signs 20 feet rn height.
IVIETAL HALIDE
3. Uniformity meets or exceeds the
259 210 175 105
recommendations as published in 131
E][F]
I d- !2---
133
109
8i
141
108
90
6A
323
119
9l
T5
5a
268
a9
69
58
45
T1
55
36
161
Li l[r ]
267 216 142 137 110
23000 244 166 140 106 85
candle values by lamp proration MS250/HOB 167 134 116 a8 't1
factors shown in table, page 30. 105 90 69
HIGH-PBESSURE SODIUM
fd'l
I q 42 aa
274 226 147 140 113
II ,o't::
I 165 133 112 a4 67
16 000 126 142 B7 66 52
LU15O 3l." 105 86 55
37.50 73 62
lesso
L;
544 404 334 253 203
331 267 224 168 135
Ix
30 000 12: 245 173 130 105
LU250/S 2aa 109 87
?"izz L
156 130 111 a5 69
POWER DRAWER'
SIGN LIGHT
t-l
l.-D
Catalog
Lamp and Ballast (2) Lamp Watts
Number (1)
Series 1000
FS1028 10o(3)
FS1048 Mercury-CWA 175(3)
FS1058 250(3)
FSl t 58 Metal Halide CWA 250(3)
FS1818 70(3)
FS1828 100(3)
FS1838
High-PressureSodium HB 150(3X4)
FS1258 H igh-Pressure Sodium CWA 25O(3)
Series 2000
FS2068 Mercury-CWA 40o(3)
FS2.t 68 Metal Halide-CWA 40o(3)
FS2258 250(3)
Hiqh-Pressure Sodium-CWA
FS2268 40o{3)
PARAPET BRACKET
FATO
FA67-Mounts two lum inaires back- FA68-Three-luminaire mount at FA70- Four-luminaire mount at
to-back at 180-degrees apart. Fits 120-degrees apart. Fits 3-inch O.D. 90-deqrees apart. Fits 3-inch O.D. or
2-inch pipe (2%-inch O.D.) tenon. tenon s- 4%-inch O.D. tenons. l\4ounts Series
calibrated. striated knuckle-tvpe 1000 and Series 2000 luminaire
FA69- lvlast-arm slipfitter fits 2-inch
adjustments lock each luminaire in pipe (2%-inch O.D.). Cast-aluminum housing-sizes.
desired position with concealed consiruction secures luminaire to mast- FA71-Same as FA70, except mounts
retaining bolts, allowing independent arm tenon by four setscrews that Series 3000 lum inaire housing-size.
vertical aiming for each unit. Corrosion- prevent luminaire rolation.
resistant. cast-aluminum construction.
USAGE:
Determine aiming (tilt ang le) for each FH1000 FH2000 FH3000
luminaire on pole. Multiply front 7f Dim. 15', 20.25" 27 5"
E.PA. by tilt angle correction factor 'B Dim. 12" 1625" 22',
for each luminaire. Add all adjusted
'C Dim. 9 5' 13'.
E.PA:s to obtain total E.PA. for pole.
Select pole with E.PA. capacity to Fronl E.PA: 1 6 Sq. Ft. 2.7 Sq. Ft. 4.8 Sq Ft
withstand basic wind-velocity and Side E.PA:* .71 Sq. Ft. 1.14 Sq. Ft 1.94 Sq. Ft.
gust wind-velocity in M.PH.lor your
'At 90o tilt ansle
area, within isotach lines from 50- **At any tlli angle-does not change.
year mean-recurrence-interval map. NOTE: E.PAls include raw area and coefficient of draq (shape) tactor
EFFECTIVE PROJECTED AREA (E.P.A.) TABLE_SQ. FT.
POWER DRAWER HOUSINGS/MOUNTING BBACKET COMBINATIONS
FOR SITE LIGHI FLOODLIGHT, SPOBTS LIGHT & AREA LIGHT
NOTE:All E.PA. values are based on wind-tunnel Use FA65 mounting litter lor all luminaires.
tests. Values for clusters are based on all luminaires
tilted at the same angle and include E.PA. for lumi
E.PA. values lor mounting brackets
FA43 = 2.8, FA44 = 2.1.
FA42 = 1.6, -
naires and brackets. Luminaires may be oriented at
any lateral {horizontal)angle. (Example-One at 180o
lf luminaire tilt angle is between angles shown, use
and two at 09) next highest angle.
NOTE: All E.PA. values are based on wind tunnel -lndicates that luminaires will not fit because of
tests. Values for clusters are based on all luminaires mechanical interf erence.
tilted at the same angle. * lndicates max. wind resistance on side ol luminaire,
(1) Max. tilt angle is 85o (2) Max. tilt angle is 600 not front.
(3) Max. tilt angle is 650 (4) Max. tilt angle is 35o lJ luminaire tilt angle is between angles shown, use
(5) Max. tilt anqle is 50o (6)Max. tilt angle is 45o next h ighest value.
General Unit Construction -shall consist of a construction in two sections. Top section,
single cast-aluminum housing and housing door attached to floodlight housing, shall be of
assembly. The housing shall contain the optical striated-knuckle design, with positive-lock
components and a removable ballast drawer position/stop capability. Lower section shall
assembly. The unit shall be supported by a cast- have matchinq striations and shall be attached
aluminum, adjustable-mounting f itter. No weep to the upper section by means of a %-1 3 hex-
or drain holes shall be permitted. The entire head bolt with tightening torque range of 360
unit shall be classified as a sealed type. to 500-in./lbs. Lower section shall be cast-
aluminum and shall be of the following types
Housing-shall be a single-piece aluminum {specify).
casting, forming a watertighi shell. lt shall con- Tenon Sliptitter (FA65) shall tit 2" pipe (2%"
tain the electrical- and optical-com ponent O.D.)or 3" O.D. tenon. lt shall be secured to
compartments. lt shall be UL wet label-listed by the tenon by no less than four (4) corrosion-
itself .
resistant, cup-point, locking-type setscrews. lt
Housing Door-shall be cast-aluminum and shall shall contain a gasketed wiring compartment,
hold a tempered, heat- and impact-resistant easily accessible by means of a removable, cast-
glass lens. lt shall be gasketed with high aluminum cover-plaie for installation of
temperatu re-resistant gasket and shall be concealed wiring. lt shall also have a knockout
hinged to the fixture housing with a non- provision for external wiring or for installalion
corrosive hinge assembly. lt shall be held of button-type photocontrol.
closed with (corrosion-resistant captive screws), Mast-Arm Slipfitter (FA69)-shallfit only 2" pipe
or (stain less-steel and aluminum, spring-loaded, (2%" O.D.) and shall be secured to the tenon
quick-release latches) (specify). by corrosion-resistant, cup-point, locking-type
Gasketing-all gasketing material shall be high setscrews that will prevent luminaire rotation.
tem peratu re-resistant rubber All areas that are Wall-Mounting Fitter (FA66)-shall mount on a
gasketed shall be of metal-to-metal or metal- vertical, flat surface and shall have mounting
to-glass interface-contact design, to prevent holes for two (213/B-inch bolts. lt shall contain a
gasket deterioration from exposure to atmo- gasketed wiring compartment, accessible by
spheric conditions. All gasketing shall provide means of a removable cover-plate. Provisions
com ponent-com partment sealing, to prevent for external wiring shall consist of two (2)
external atmospheric contaminant intrusion. %-inch, removable pipe-plugs that shall form a
weatherproof joint with the mounting of ihe
Finish*all painted parts shall be coated with fitter over a 4-inch square or round electrical box.
powder-coat thermoset acrylic enamel, formu-
lated to provide no appreciable fading char- Flat-Surf ace/Cross-Arm Adapter (FA64) -shall
acteristics within f ive 15) years. Coating shall have an aiming quadrant marked in 10o incre-
be 2Io 4 mils in thickness and shall have the ments. Cable entry to the fixture shall be made
following characteristics. throuqh this adapter assembly and shall have a
1. Salt-Spray Test +ASTM8117-64: 1000 Hrs. weatherproof nylon, strain-relief bushing. The
2. Water-lmmersion Test #ASTN/ D-A7O-54. quadrant plate shall attach to the cross-arm or
1000 Hrs. flat surface with a %10 UNC HD Hex pivot-bolt
3. Condensing-H u m id ity Test-Cleveland Spec. and one %-16 U NC H D Hex locking-bolt. A 3c,
#.128A: 1000 Hrs. +14 AWG-type SO cord shall be prewired to
4. Gardner lmpact-Modified GE Blunt lmpact the luminaire.
Spec. +748: 100-in./lbs. Direct. Universal Mounting Bracket (FA72)*shall have
5. Gloss lnitial: 10-2O%. four (4) mounting holes for /6-inch bolts that
6. Crosshatch Tape Adhesion-Coil Coaters permit mounting to a slotted angle or channel,
Association (NCCA) Bulletin +11-16: U-bolts, or a horizontal/vertical, flat surface. lt
100% Adhesion. shall contain a gasketed wiring compartment,
accessible by means of a removable cover-plate.
The coating shall be applied after the surface Provisions for surface wiring shall consist of
has been ihoroughly cleaned and treated in a three (3) %-14 NPT (pipe size) tapped holes:
f ive-stage chromate conversion coating-system
one on each side and one on top.
process. Color shall be-specify (Bronze),
(Black), (Aluminum). Multiple-Unit, Tenon-Mounting Slipf itters
(FA6Z FA68, FA70, FA71)-shall have the
Fitter Assembly-shall be of cast-aluminum same basic construciion as the sing le-tenon
slipfitter. Twin Units (FA67)-shall be back-to- above maximum-beam candlepower. Light shall
back at I80o apart and shallfit 2 " pipe (2%" O.D.) be evenly distributed to provide a total vertical-
tenon. Triple Units (FA68)-shall be at 120o beam spread of (specify) degrees and a total
apart and shall f it 3" O.D. tenons. Quad Units horizontal-beam spread of {specify) degrees.
(FA70 or FA71)-shall be at 90o apart and shall Maximum-beam candle-power shall be (specify)
have an internal, concealed, clam ping-assembly c.p. When aimed at maximum angle of (specify)
that will fit either a 3" O.D. or 4%" O.D. pole degrees above nadir, light shall be cut off at
tenon. (specify) degrees below horizon. Optical design
Power Drawer Ballast Assembly-shall be a self- shall provide maximum lighl source conceal-
.1000-,
contained, removable tray assembly of modular ment. All 400-, and 1500-watt units shall
design and shallcontain all electrical com- have an insulated lamp-stabilizer that shall
ponents of the ballast. lt shall have a polarized, cushion the lamp from shock or vibration to
qu ick-d iscon nect, -mate and -lock power-input eliminate breakage. In conjunction with the
plug. lt shall be UL labeled by itself and shall socket, it shall maintain precise lamp-alignment
be fie ld-interchangeable with any unit of the in the optical assembly.
same size, withoui requiring the luminaire to Floodlight Series FL-shall consist of two (2)
be removed from the supporting attachments angular side-panels, held in correct contour by
or structures. The ballast shall be specifically
the housing casting. In addition, there shall be
designed for the lamp-type specified and at the a main back-reflector and top- and bottom-
voltage specif ied. reflectors. Working in conjunction with each
other, the segments shall provide two main
Mercury or Metal-Halide Lamp Ballast-shall beams to form a wide "batwinq" distribution in
be of the constant-wattage autotranslormer, the horizontal-beam plane. Light shall be evenly
high power-factor type. Starting current shall distributed to provide a vertical-beam spread
be less than operating current. of (specify) degrees and (specify) candle-power
High-Pressure Sodium Lamp Ballast-shall be and shall occur at (specify) degrees, left and
as follows: 7o-watt through 1so-watt units shall right of 0 degrees, in the horizontal plane.
be high-reactance autotransformer, high power- Sports Light Series FL shall consist of a
factor type. 200-watt through 1000-watt units truncated, circular, spun-aluminum, parabol jc
shall be constant-wattage autoiransformer, high main-reflector and a top- and bottom-ref lector.
powerjactor type, with starting current less All 1000- and 1500-watt units shall have an
than operating cu rrent. insulated lamp-stabilizer that shall cushion the
lamp from shock or vibration to eliminate
Optical Compartment-shall contain the socket-
and-reflector assembly and shall be enclosed breakage. ln conjunction with the socket, it
by the lens-and-housing-door assembly and shall maintain precise lamp-alignment in the
h ou s ing.
optical assembly. Maximum-beam candlepower
shall be (specify) c.p. Light shall be evenly
Socket-shall be porcelain-enclosed and shall distrlbuted io provide a total vertical-beam
have a spring-loaded, center contact. lt shall spread of (specify) degrees and a total
be properly positioned to allow correct location horizontal-beam spread of (specify) degrees.
of the lamp in the ref lector assembly. lt shall Luminaire and optical assembly shall be
be specifically designed to withstand the high- designed to operate the lamp in a {vertical)
voltaqe impulse needed to siart the lamp. (horizontal) position.
Rellector Assemblies- shall be constructed of Area Light Series FR-shall be a formed-
Alzak"Jinished, h ig h-pu rity, reflective aluminum reflector assembly to provide asymmetrical
material, shall be designed to provide optimum roadway-light distributions. lt shall be shaped
photometric results in conjunction with the fix- to provide l.E.S. light distribution: short,
tures and lig ht sources for which they are medium, or long vertical-light distribution; and
designed, and shall be for the following fixture cutoff, semicutoff, or noncutoff light control
types (specify). when the luminaire is adJusted at (specify)
degrees above horizontal.
Site Light Series FC-shall consist of separately
formed, top-and-back main-ref lectors and end- Sign Lighl Series FS-shall be same as Site
reflectors. The optical assembly shall provide Light, except 70- through 250-watt unrts shall
characteristics permitting the vertical-beam not require a lamp-stabilizer, and the unit is
component to be "cut-off" at (specify) degrees aimed up at the sign structure from bottom and
front of sign.
*Alzak isan exclusive trademark olthe Aluminum Company oi America