Professional Documents
Culture Documents
Revere 2000 General Purpose Floodlights Bulletin 1966
Revere 2000 General Purpose Floodlights Bulletin 1966
Revere 2000 General Purpose Floodlights Bulletin 1966
t/ SECTION
2OOO-'| | 2
PHOTOMETRIC PERFORMANCE O
Beam Descriplion Avg. Beam SDread
(lES TyFd o Rollector Mrr. Horiz. Vert.
ORDERING INFORMATION O
tAMP DATA o Yoke Mtg. Crossarn Mtg. 2" Sliplitler Mtg.
tEs Type Rellector Catalog Approx. Nel Calalog Approx. Net Catalog Appror. Net
(Beam Spread)@ Diameter lncandescent Metcury Nu nher an rn Wighi (Lbs.) N umbe r oiil Weight ([bs.) Nu mber 6t ii Weight (Lbs.)
slttr BLlsNrfr6
'-7
_T
ACCESSORTES
Calalog Appror. Net
Descriplion Nu mber Weight (Lbs.)
2ooo-1 / 2
SERIES 2OOO GENERAL PURPOSE FLOODLIGHTS
o Cast aluminum socket housing cap can be positioned
intervals.
at 120"
B Bend in renector prevents accumulation of moisture. Alumi' Series 2080,2090 18', 8%" 18', t7,lt
num hinge furnished; rear reflector with socket can be
opened and returned to closed position without realigoing Series 2050,2060 20' 8%' r9%, 11y1'
floodlight.
REFLECTORS-Thc fomcd, trvo-picce rccted by gently pressing the bulb in thc number for sockets factory positioned
reflectors arc alulninum. lnpact ancl required direction. for use rvith 400-W mercury or metallic
heat rcsistant glass lcnses are prna vaPor lamPs.
nentlv scalcd inside the front reflectors. SOCKET HOUSING Cast alumitrurrr MOUNTING Units arc furnished
A condcnsation drain is provided to pre- socket housings are crimped to the rvith yoke nountirg or rvith crossaml or
vcrt accunulation of moisture. A rolled rcflr reflector). Conrplete g.r'leting i' 2-inch slipfitters attached to the yoke
sectiol around the peripherv of the rear furnished around the removable top cap. assenbly. Qthcr types of mountings can
refleclor help prercrt tlie c lry of rroi\' Ar r\beJLo. ircat baffie, rvith an alumi- be achievcd by orclering yoke mount-
tur at th iuncturc of the two rcflectors. Durll facc, is provided rvith each flood' ing fioodlights and selecting alternate
Thc front and rcar reflectors are ioired light and shouid be installcd at the nountings from accessories. See Section
bv an aluminum hilge lnd two stirinlcss necli of the l np to prcvcnt hcat froir 4 of the Revere catalog for poles and
stcel spring latches. Floodlights can bc rcaching the socket and wiring. brackcts suitable for mounting.
positioned by usiog the sight in thc rcar
reflector, which is sealed by a captive Unlc'. 'pecified. all S.rie' 2000 frood PHOTOMETRICDATA Consult
rubber plug, and an ctchcd circle in the 1ighl" rvrll lre rvith 'ocleL pori- Rcvere or your Roere Rcpresentativc
'lrippcd
lens. Using this aiming device, slight tioned for us with PS-i2 incandesccnt for additional photonetric or technical
rnisalignmelt of the larup can bc cor- lamps. Add sulfix "NI1" to the catalog data
SUGGESTED SPECIFICATIONS vice, (onsisting of a sight in rhe rear reflector and an etched circle
in the lens, shall petmit positive aiming of the floodlight. The front
Iurnish and install Rlere Rear Service Floodligirt, Catalog Number and rear reflectors shall be joined with an aluminum hinge and t*o
which conforms to drawings and specifcatiods at' stainless steel latches. A removable cast aluminum cap on the socket
tached. The two-piece spun aluminum reflectors shall have a housing shall permit 120o rotation of the packing gland. A heavy
finish and a contour $,hich provides IES Type- duty mogul base r500-W, 600v porcelain socket shall be furnished.
distribution when used v,'ith 1500-\w PS-52 clear incandescent An asbestos baffle, wth an aluminum face, shall protect socket and
lamps. An impact and heat resistant glass lens shall be permanently wiring from lamp heat. The unit shall be vr'ired, and grounded, with
sealed in the front reilector. The rear re8ector shall be gasketed and 3-ft. of No. t4-:, Type S cord and be equipped with
crimped to the cast aluminum socker housing. A built-in aiming de- mounting.