Professional Documents
Culture Documents
Xi-Wob UP3 - Brochure PDF
Xi-Wob UP3 - Brochure PDF
Xi-Wob UP3 - Brochure PDF
Established 1963
MECHANIZED IRRIGATION
Senninger introduced Wobbler technology in 1978.
Low application intensity, unmatched uniformity,
large area of coverage at low pressure.
www.
com
SENNINGER.
Xi-Wob UP3 Easy Clean Nozzle
NEW!
The Senninger Xi-Wob provides the same ultra-low Easy Clean - Easy Change Nozzle
application intensity and uniform distribution pattern Nozzle Removal Nozzle Installation
that has made the Senninger i-Wob the leading pivot PINCH PULL PLACE CLICK
sprinkler on the market. It utilizes patented counter
balance technology, making it ideal for installation on:
Semi-rigid PE drops
No need to disassemble or remove the sprinkler
Steel drops
Flexible hose drops when used with The One Weight Easy snap-in nozzle To remove: pinch and pull.
To install: place and click.
Applicator can be installed directly into a pressure
regulator - no special threads or fittings required.
Large Area of Coverage
The Xi-Wob provides the largest area of
Ultra Low Pressure
instantaneous coverage at a lower pressure. By
applying water to a larger area of soil surface The Xi-Wob is designed
at any given instant of the sprinklers operation, for peak performance at
the impact of the sprinklers pattern on the ultra-low pressures of 10
soil structure is reduced. Larger instantaneous to 15 psi (0.69 to 1.03 bar).
coverage area reduces the rate at which the Lower operating pressures
soil is required to take in water. Preservation offer irrigators a tremendous
of intake rate and increased soak times greatly opportunity to lower total pumping costs
reduce the potential for irrigation water run-off and increase their energy savings by reducing
and wheel rutting. both horsepower requirements and energy
consumption.
www.
1 com
SENNINGER.
Droplets 0 100 Droplets
100 90 80 70 60 50 40 30 20 10 0
% Sand
100 0
Clay Droplet size needed for
Sandy Clay 90 10 type of soil
Clay Loam
Clay All soils are made up three basic
80 20
Silty Clay
components: clay, sand and silt. The relative
Silty Clay Loam
70 30 amounts of each component determines
Sandy Clay Loam the soil type. The black dots spread over
Medium Loam 60 40 the triangle represent droplet sizes (small,
medium, large) and suggest the ideal size
% Clay 50 50 % Silt
Silty Loam
Sand for different type of soils. If you know your
Loamy Sand 40 60 soil texture, look over the graph above to
Sandy Loam find the color and percentages of clay, sand
30 70 and silt that best match the composition
Silt
of your soil. Once you have located these
20 80
percentages, you should be able to find the
10 90 recommended droplet size for your specific
Sand Silt soil type. Typically, tighter soils require smaller
0 100 droplets and looser soils can accept larger
100 90 80 70 60 50 40 30 20 10 0 droplets.
% Sand
m)
Five-foot Five-foot
wetted wetted (206 sq m ) (206 sq m ) many small droplets that get
band band
evaporated or blown away
by the wind. The Xi-Wob
Overhead view
Overhead view offers a gentle more uniform
delivery and an even droplet
In this example, the Xi-Wob is spreading the same amount of water over an
area five times greater than the area covered by the spray nozzle. Nozzles
size large enough to resist
are at 15 psi (1.03 bar) and at 6 ft (1.83 m) in height, using an 11/32 wind-drift, but not so large as
inch (8.73 mm) nozzle with a flow of 13.33 gpm (3028 L/hr) in no wind to disrupt the soil.
conditions.
www.
com 2
SENNINGER.
Xi-Wob UP3 Models
The Xi-Wob is available with three different deflectors. This allows you to
customize the droplet size and trajectory that best suits your installation, soil,
and crop needs.
www.
3 com
SENNINGER.
Components Xi-Wob UP3
Component Assembly
UP3 Elements.ai
UP3 Nozzle
Whole sizes Half sizes
1/2
underneath
is in Short Term - main number
Michelle
UP3 Nozzle
Notches
or Dual Nozzle
Carrier
Engine Module
(Assembly includes Shown with Senninger's 180 Gooseneck and fittings.
Deflector)
Integrated Base
1 8 The One Weight
With the UP3 design, the Xi-Wob base It provides stability on drops for a number of pivot
is now an integral part of the bracket. It applicators. Its unique fit technology allows the weight
can be installed directly into a pressure to fit securely onto the i-Wob, Xi-Wob, LDN, Super
regulator or onto a standard 3/4" female Spray, and even some other manufacturers applicators.
NPT connection, increasing reliability and The weights easy-to-install design lets it remain on the
requiring fewer parts. applicator during nozzle changes. The One Weight is constructed entirely of
zinc alloy. It weighs approximately 0.85 lbs (0.30 kg).
www.
com 4
SENNINGER.
Xi-Wob UP3 Top of Pipe
Pressure Regulator
10 PSI
0.69 BAR
The Xi-Wob TOP must be installed on the
top-of-pipe along a center pivot or other
mechanical move system.
Manifolding two or more Xi-Wob TOPs
from a single outlet is not recommended.
605-TOP (White)
Xi-Wob TOP System 6-Groove
Design Criteria Medium Droplets
5 Trajectory
Nozzle sizes
Minimum** #10 5/32" (3.97 mm)
Maximum* #24 3/8" (9.53 mm)
Flows
Minimum 2.24 gpm (509 L/hr)
Maximum 12.88 gpm (2925 L/hr)
Diameters
Minimum at 12 ft (3.66 m) 45 ft (1.37 m)
Maximum at 12 ft (3.66 m) 50 ft (15.2 m)
Maximum Spacing
at 12 ft (3.66 m) ground clearance 20 ft (6.1 m)
Pressure at the Nozzle
Minimum 10 psi (0.69 bar)
Maximum 10 psi (0.69 bar)
*It is recommended that larger nozzle sizes be used only on
soils and slopes that can handle higher application rates.
** If using smaller nozzles than recommended for the
www.
605-TOP, ask about our Xcel-Wobbler
5 com
SENNINGER.
Nozzle Flows Xi-Wob UP3