Professional Documents
Culture Documents
Lab Report Measurement and Instrumentation 1
Lab Report Measurement and Instrumentation 1
USING CRO
OBJECTIVES
RESULTS
1. It can be seen from the graph that the value of VL and t are increasing with the
increasing of frequency while the value of VR is decreasing.
2. Oscilloscope can also be used as a null indicator in balancing a bridge circuit because of its high
input impedance. The horizontal plate are not employed, so that the out-of-balance voltage,
amplified by the vertical amplifier, reduces linear vertical deflections on the screen. If the bridge
is balanced, the out-of-balance voltage and therefore the deflections disappear, and all that is lef
on the screen is the spot O.
CONCLUSIONS
As our conclusion .We can tell that oscilloscope can measure voltage across resistors
and inductors and also can measure the phase angle of impedance in an AC circuit.
From here we know that oscilloscope has very many function not limited only to
display waveform.The oscilloscope will help us to calculate the phase or the
frequency by his formed lissajous figure.