CircuitWorks Heat Sink Grease is a silicone-based thermal grease that facilitates heat transfer from electrical components. It has a thick consistency due to a heat conductive metal oxide filler. It maintains a seal between heat sinks and components with a usable temperature range of -52°F to 603°F. It has excellent thermal conductivity, dielectric strength, and arc resistance and is generally compatible with most materials used in circuit board fabrication.
CircuitWorks Heat Sink Grease is a silicone-based thermal grease that facilitates heat transfer from electrical components. It has a thick consistency due to a heat conductive metal oxide filler. It maintains a seal between heat sinks and components with a usable temperature range of -52°F to 603°F. It has excellent thermal conductivity, dielectric strength, and arc resistance and is generally compatible with most materials used in circuit board fabrication.
CircuitWorks Heat Sink Grease is a silicone-based thermal grease that facilitates heat transfer from electrical components. It has a thick consistency due to a heat conductive metal oxide filler. It maintains a seal between heat sinks and components with a usable temperature range of -52°F to 603°F. It has excellent thermal conductivity, dielectric strength, and arc resistance and is generally compatible with most materials used in circuit board fabrication.
PHYSICAL PROPERTIES CircuitWorks Heat Sink Grease silicone compound facilitates heat transfer away Color White from electrical/electronic components. This heavy consistency material is thickened with Specific Gravity @ 25C (77F) 2.6 a heat conductive metal oxide filler to maintain a positive heat sink seal in Usable Temperature Range electrical/electronic equipment. -52 F (-46 C) to 603 F (317 C) Excellent conductivity Dielectric Strength, v/mil 500 Meets MIL-C-47113 Noncorrosive Dielectric Constant @ 100 Hz 4.4 High dielectric strength Low bleed Dissipation Factor @ 100 Hz 0.005 Stable from -15C to 200C Nonflammable Volume Resistivity, ohm-cm 1 x 1014
Arc Resistance, seconds 120
TYPICAL APPLICATIONS CircuitWorks Heat Sink Grease may be Thermal Conductivity, used for electronics and applications Cal-cm/sec-cm2 -C 1.5 x 10-3 including: BTU-in/hr-ft2 -F 4.35 Effective Thermal Coupler For Any W/mK 0.63 Heat Sink Device Shelflife 5 years Nonflammable Coating Protection High Voltage Corona Protection Excellent for Improving Readings on Contact Type Thermocouples COMPATIBILITY CircuitWorks Heat Sink Grease is generally compatible with most materials used in printed circuit board fabrication. As with any silicone compound, compatibility with substrate must be determined on a non- critical area prior to use. Material Compatibility Ceramic Good ENVIRONMENTAL IMPACT DATA Clean Metals Good Glass Good ENVIRONMENTAL IMPACT DATA Natural Fibers Good CFC 0.0% VOC 0.0% Silicone Resins Good HCFC 0.0% HFC 0.0% Painted Surfaces Good Cl. Solv. 0.0% ODP 0.00 Plastic Surfaces Good CFC, HCFC, CL. SOLV., VOC, and HFC numbers Synthetic Fibers Good shown are the content by weight. Ozone depletion Vulcanized Silicone Rubber Good potential (ODP) is determined in accordance with the Wood Good Montreal Protocol and U.S. Clean Air Act of 1990.
USAGE INSTRUCTIONS NOTE:
This information is believed to be accurate. It is For industrial use only. intended for professional end users having the skills Read MSDS carefully prior to use. to evaluate and use the data properly. Contact Chemtronics for complete usage CHEMTRONICS does not guarantee the accuracy and application instructions. When using of the data and assumes no liability in connection CircuitWorks Heat Sink Grease, follow with damages incurred while using it. these guidelines: Apply to all mounting and threaded surfaces of the device and the CHEMTRONICS chassis. Apply by pushing product ahead of 8125 COBB CENTER DRIVE neck. KENNESAW, GA 30152 1-770-424-4888 REV. B (07/15) Dispensing: CircuitWorks Heat Sink Grease is a ready-to-use one-component material. Collapsible tubes may be Chemtronics and CircuitWorks are registered trademarks of Chemtronics. All rights reserved. squeezed by hand or with the aid of mechanical wringers.
AVAILABILITY DISTRIBUTED BY:
CT40-5 5 oz. Tube
TECHNICAL & APPLICATION
ASSISTANCE Chemtronics provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401.