Professional Documents
Culture Documents
Y Series Changeover Motorswitch: Automatic Transfer Unit
Y Series Changeover Motorswitch: Automatic Transfer Unit
Y Series Changeover Motorswitch: Automatic Transfer Unit
cam operated
operated Y Series control relays
control relays control relays
switchwes
switches A5 Changeover Motorswitch
Functions
Automatic transfer units are used on backup supply systems to operate complete supply
transfers. It integrates Y5 Automatic Changeover Switches with a control logic that will
run the process. This logic is managed by phase failure relay and timers programmed
upon application requirements. Y Series
According to
IEC 947-6-1
Changeover Motorswitch
IEC 61000
PHASE CONTROL
RELAYS
time fuse protection
Over/under voltage. automation and control ABK Fuse
switches Protection
TIMERS Phase sequence and
Start/stop generator. failure control.
Transfer delays. Fault time delay.
OUTPUT AUXILIARY
CONTACTS
Voltage free.
Signal.
Generator control.
System diagram
Y5.02
Automatic Changeover Switch VISUAL INDICATION OPERATION COUNTER
Technical Data
63A 100A 125A 160A 200A
Internal processor stores
number of operations. rated voltage V AC 690 690 690 690 690
Functions frequence Hz 50 50 50 50 50
3 pushes start blinking display.
Y5 motorised changeover switches 5 digits appear displaying num- thermal rating Ith A 80 125 150 160 200
have been designed to operate remote manual ber of operations.
automatic changeover operations. They thermal rating Ith A 63 100 125 160 200
digital position mode signaling
increase electromechanical security on AC-23 230V AC kW 15 18,5 18,5 30 38
indication
automatic remote operations. 400V AC kW 22 30 37 52 65
2.201 operations 500V AC kW 30 37 45 65 80
2
shaft indicates flexible wire mm 16-50 16-50 16-50 95 95
According to mechanical position standed wire mm 2
16-50 16-50 16-50 95 95
IEC 947-3 motor consumption peak A 2,5 2,5 2,5 2,5 2,5
IEC 61000 ISOLATED CIRCUITS PADLOCKING nominal A 1 1 1 1 1
Integrated internal link. Unit lockable up to 4 padlocks. weight gr 2.250 2.250 2.250 2.850 2.850
Cam mechanical interlock, Manual mode operation disables connection open cable clamps M8 ring terminal M8
prevents parallel connection motor.
under all circumstances.
On industrial and public service Motor switching-on can be Industrial process typically Industrial, public and private
establishments demanding automatically operated by require automatic motor systems demand remote
continuous electrical supply, a a star-delta changeover reversing with optional automatic on-off switching.
generator is installed requiring switch. manual operation.
Dimensions in mm.
a changeover operation.