Professional Documents
Culture Documents
Section 1 Safety Precautions - Read Before Using: 1-1. Symbol Usage
Section 1 Safety Precautions - Read Before Using: 1-1. Symbol Usage
coolers 2013-10
7
Protect yourself and others from injury read, follow, and save these important safety precautions and operating instructions.
During operation, keep everybody, especially children, away. HOT PARTS can burn.
ELECTRIC SHOCK can kill. D Do not touch hot parts bare handed.
Touching live electrical parts can cause fatal shocks D Allow cooling period before working on equip-
or severe burns. The input power circuit and machine ment.
internal circuits are also live when power is on.
Incorrectly installed or improperly grounded equip- D To handle hot parts, use proper tools and/or
ment is a hazard. wear heavy, insulated welding gloves and
clothing to prevent burns.
D Do not touch live electrical parts.
D Disconnect input power or stop engine before installing or
servicing this equipment. Lockout/tagout input power according to
OSHA 29 CFR 1910.147 (see Safety Standards).
D Properly install, ground, and operate this equipment according to
FLYING METAL or DIRT can injure eyes.
its Owners Manual and national, state, and local codes.
D Always verify the supply ground check and be sure that input D Wear approved safety glasses with side
power cord ground wire is properly connected to ground terminal in shields even under your welding helmet.
disconnect box or that cord plug is connected to a properly
grounded receptacle outlet.
OM-
D Perform maintenance and service according to the Owners
READ INSTRUCTIONS. Manuals, industry standards, and national, state, and local codes.
D Read and understand the Safety Data Sheets (SDSs) and the
D Read and follow all labels and the Owners
manufacturers instructions for adhesives, coatings, cleaners,
Manual carefully before installing, operating, or
consumables, coolants, degreasers, fluxes, and metals.
servicing unit. Read the safety information at
the beginning of the manual and in each
section.
D Use only genuine replacement parts from the manufacturer.
Welding or cutting equipment produces fumes or gases This product contains chemicals, including lead, known to
which contain chemicals known to the State of California to the state of California to cause cancer, birth defects, or other
cause birth defects and, in some cases, cancer. (California reproductive harm. Wash hands after use.
Health & Safety Code Section 25249.5 et seq.)
OM-