Professional Documents
Culture Documents
2n2222a PDF
2n2222a PDF
Features http://onsemi.com
MILPRF19500/255 Qualified
COLLECTOR
Available as JAN, JANTX, and JANTXV 3
2
MAXIMUM RATINGS (TA = 25C unless otherwise noted) BASE
ON CHARACTERISTICS (Note 1)
DC Current Gain hFE
(IC = 0.1 mAdc, VCE = 10 Vdc) 50
(IC = 1.0 mAdc, VCE = 10 Vdc) 75 325
(IC = 10 mAdc, VCE = 10 Vdc) 100
(IC = 150 mAdc, VCE = 10 Vdc) 100 300
(IC = 500 mAdc, VCE = 10 Vdc) 30
Collector Emitter Saturation Voltage VCE(sat) Vdc
(IC = 150 mAdc, IB = 15 mAdc) 0.3
(IC = 500 mAdc, IB = 50 mAdc) 1.0
Base Emitter Saturation Voltage VBE(sat) Vdc
(IC = 150 mAdc, IB = 15 mAdc) 0.6 1.2
(IC = 500 mAdc, IB = 50 mAdc) 2.0
SMALL SIGNAL CHARACTERISTICS
Magnitude of SmallSignal Current Gain |hfe|
(IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz) 2.5
SmallSignal Current Gain hfe
(IC = 1.0 mAdc, VCE = 10 Vdc, f = 1 kHz) 50
Input Capacitance Cibo pF
(VEB = 0.5 Vdc, IC = 0, 100 kHz f 1.0 MHz) 25
Output Capacitance Cobo pF
(VCB = 10 Vdc, IE = 0,100 kHz f 1.0 MHz ) 8.0
SWITCHING (SATURATED) CHARACTERISTICS
TurnOn Time ton 35 ns
(Reference Figure in MILPRF19500/255)
TurnOff Time toff 300 ns
(Reference Figure in MILPRF19500/255)
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle 2.0%.
http://onsemi.com
2
2N2222A
400 1.2
150C
350
VBESAT, BASEEMITTER
300 55C
0.8
250 25C 25C
200 0.6
150C
150
55C 0.4
100
0.2
50
VCE = 10 V IC/IB = 10
0 0
0.1 1 10 100 0.1 1 10 100
IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA)
Figure 1. DC Current Gain Figure 2. BaseEmitter Saturation Voltage
0.4 1.1
IC/IB = 10 VCE = 1 V
55C
SATURATION VOLTAGE (V)
0.9
0.3 0.8 25C
150C 0.7
0.6
150C
(V)
0.2
25C 0.5
55C 0.4
0.3
0.1
0.2
0.1
0 0
0.1 1 10 100 0.1 1 10 100
IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA)
Figure 3. CollectorEmitter Saturation Voltage Figure 4. BaseEmitter Voltage
1.0 25
TJ = 25C
100 mA
CIBO, INPUT CAPACITANCE (pF)
VCESAT, COLLECTOREMITTER
fTEST = 10 kHz
SATURATION VOLTAGE (V)
20
IC = 10 mA 300 mA
15
0.10
10
500 mA
0.01 0
0.01 0.10 1 10 0 1 2 3 4 5
IB, BASE CURRENT (mA) VBE, BASEEMITTER (V)
Figure 5. Collector Saturation Region Figure 6. Input Capacitance
http://onsemi.com
3
2N2222A
25 350
15 200
150
10
100
5
50
0 0
0 2 4 6 8 10 12 14 16 18 20 1 10 100
VBC, BASECOLLECTOR VOLTAGE (V) IC, COLLECTOR CURRENT (mA)
Figure 7. Output Capacitance Figure 8. Current Gain Bandwidth Product
http://onsemi.com
4
2N2222A
PACKAGE DIMENSIONS
TO18 3
CASE 206AA
ISSUE A
B NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
DETAIL X A 2. CONTROLLING DIMENSION: INCHES.
B 3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE.
4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE
U PLANE DEFINED BY DIMENSION R.
P C 5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L.
U 6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K.
7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN
L A SEATING SIONS A, B, AND T.
R PLANE
F MILLIMETERS INCHES
NOTE 5 K DIM MIN MAX MIN MAX
E A 5.31 5.84 0.209 0.230
B 4.52 4.95 0.178 0.195
T C 4.32 5.33 0.170 0.210
NOTE 7
D 0.41 0.53 0.016 0.021
DETAIL X E --- 0.76 --- 0.030
3X D NOTES 4 & 6
F 0.41 0.48 0.016 0.019
0.007 (0.18MM) A B S C M H 0.91 1.17 0.036 0.046
J 0.71 1.22 0.028 0.048
K 12.70 19.05 0.500 0.750
N L 6.35 --- 0.250 ---
H 2 M 45_BSC 45 _BSC
1 3 N 2.54 BSC 0.100 BSC
P --- 1.27 --- 0.050
R 1.37 BSC 0.054 BSC
M J T --- 0.76 --- 0.030
U 2.54 --- 0.100 ---
LEAD IDENTIFICATION STYLE 1:
DETAIL PIN 1. EMITTER
C
2. BASE
3. COLLECTOR
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLCs product/patent coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com 2N2222A/D
5