Professional Documents
Culture Documents
EFS Manually Verification For Requirement Validation
EFS Manually Verification For Requirement Validation
EFS Manually Verification For Requirement Validation
1. Total Cost
Category: Cost/Price
Importance: 10
The total cost for materials that were used to build and test EFS is $3117.
Category: Performance
Importance: 7
The data analysis shows maximum outlet pressure is 284 psi. The challenge is the battery
performance inhibited full testing at the maximum rotational speed of EFS.
However, the pressure exceeding requirements have been witnessed in preliminary testing
of individual subsystems which is over 400 psi
Category: Performance
Importance: 8
The hydraulic system was able to deliver fluid at the maximum specified flow rate 1.46
lbm/s.
In preliminary testing of individual subsystem, a flow rate of 1.95 lbm/s have been
witnessed.
Category: Weight
Importance: 4
5. Operation life
Category: Timelines
Importance: 9
During experimental, the seal pressure limit was measured as 500 psi. The seal life and
bearing life have been determined to be 20 minutes and 200 minutes respectively. These
measurements ensure the EFS can operation for about 30 seconds.
6. Time to Installation
Category: Ergonomics/Operation
Importance: 3