This document provides design values for pavement widening on curves for two-way roads. It contains a table with recommended additional pavement widths for different road widths, curve degrees, and vehicle speeds. The additional widths range from 0.3 to 2.4 meters. Notes provide guidance on how to allocate additional widths along spiral curves and clarify that widths below 0.3 meters will not be used.
This document provides design values for pavement widening on curves for two-way roads. It contains a table with recommended additional pavement widths for different road widths, curve degrees, and vehicle speeds. The additional widths range from 0.3 to 2.4 meters. Notes provide guidance on how to allocate additional widths along spiral curves and clarify that widths below 0.3 meters will not be used.
This document provides design values for pavement widening on curves for two-way roads. It contains a table with recommended additional pavement widths for different road widths, curve degrees, and vehicle speeds. The additional widths range from 0.3 to 2.4 meters. Notes provide guidance on how to allocate additional widths along spiral curves and clarify that widths below 0.3 meters will not be used.
This document provides design values for pavement widening on curves for two-way roads. It contains a table with recommended additional pavement widths for different road widths, curve degrees, and vehicle speeds. The additional widths range from 0.3 to 2.4 meters. Notes provide guidance on how to allocate additional widths along spiral curves and clarify that widths below 0.3 meters will not be used.
1 0.60 0.60 0.60 AN AN 0.60 0.60 0.60 0.60 0.60 0.60 0.60 AN AN AN AN AN AN AN AN 0.60 AN AN AN AN 2 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.70 AN AN AN AN 0.60 0.60 0.60 0.60 AN AN AN AN 3 0.60 0.60 0.70 0.60 0.60 0.60 0.60 0.60 0.70 0.70 AN AN 0.60 0.60 0.60 0.60 0.60 AN AN AN AN 4 0.60 0.70 0.70 0.60 0.60 0.60 0.70 0.70 0.80 AN 0.60 0.60 0.60 0.60 0.60 AN AN AN AN 5 0.70 0.70 0.80 0.60 0.60 0.70 0.80 0.90 0.60 0.60 0.60 0.60 0.60 AN AN AN AN 6 0.80 0.80 0.90 0.60 0.70 0.80 0.90 0.60 0.60 0.60 0.70 AN AN AN AN 7 0.80 0.90 1.00 0.70 0.80 0.80 0.90 0.60 0.60 0.60 0.70 AN AN AN 0.6 8 0.90 1.00 1.00 0.80 0.80 0.90 0.60 0.60 0.70 AN AN 0.60 9 0.90 1.00 1.10 0.80 0.90 1.00 0.60 0.70 0.80 AN 0.60 0.60 10 1.00 1.10 1.20 0.90 1.00 1.10 0.70 0.80 0.90 AN 0.60 0.60 11 1.00 1.10 1.20 0.90 1.00 0.70 0.80 0.60 0.60 12 1.10 1.20 1.30 1.00 1.10 0.80 0.90 0.60 0.60 13 1.10 1.20 1.30 1.00 1.10 0.80 0.90 0.60 0.60 14 1.20 1.30 1.40 1.10 1.20 0.90 1.00 0.60 0.60 15 1.20 1.40 1.50 1.20 1.20 1.00 1.10 0.60 0.70 GRADO DE CURVATURA
16 1.30 1.40 1.20 1.00 0.60
17 1.30 1.50 1.30 1.10 0.70 18 1.40 1.50 1.30 1.10 0.70 19 1.40 1.60 1.40 1.20 0.80 20 1.50 1.60 1.40 1.20 0.80 21 1.50 1.70 1.50 1.30 0.90 22 1.60 1.70 1.50 1.30 0.90 23 1.60 1.80 1.60 1.40 1.00 24 1.70 1.80 1.60 1.40 1.00 25 1.70 1.60 26 1.80 1.60 27 1.80 1.60 28 1.90 1.60 1.- LOS SOBREANCHOS FUERON CALCULADOS DE ACUERDO A ESPECIFICACIONES DE LA AASHO 29 1.90 1.60 2.- EL SOBREANCHO SE REPARTIRA PROPORCIONALMENTE A LA LONGITUD DE LA ESPIRAL USADA, DEBIENDO SER EL PC O PT EL PUNTO MEDIO DE DICHA ESPIRAL 30 2.00 1.60 3.-SOBRE LAS LINEAS HORIZONTALES LOS VALORES CALCULADOS FUERON MENORES DE 0.60 m. PERO MAYORES QUE 0.30m. , EN CASO DE SER MENORES DE 0.30 m. NO SE USARA
31 2.00 1.60 SOBREANCHO.-
32 2.10 1.60 4.- PARA ANCHO DE CALZADA DE 7.20m., Y VELOCIDADES MAYORES DE 70 KPH LAS CURVAS NO SERAN SOBREANCHADAS 33 2.10 1.60 5.- ANCHOS DE CALZADA Y SOBREANCHOS EN METROS. VELOCIDADES EN KPH= KILOMETROS POR HORA. 34 2.20 1.70 6.- AN= ANCHO NORMAL 35 2.20 1.70 36 2.30 1.80 37 2.30 1.80 38 2.40 1.90 Leiscod Leiscod Leiscod