Professional Documents
Culture Documents
RESET CANON Ip3000, Ip3000, Ip4000, Ip5000, Ip4200, Ip5200, Ip6000, Ip8500.doc JADI 2
RESET CANON Ip3000, Ip3000, Ip4000, Ip5000, Ip4200, Ip5200, Ip6000, Ip8500.doc JADI 2
RESET CANON iP3000, iP3000, iP4000, iP5000, iP4200, iP5200, iP6000, iP8500
http://blog.bitas.lt/category/spausdintuvu-remontas/canon-sp/
Resetting Ink-Waste Overflow Counter Canon Pixma iP3000, iP4000, iP5000 Printers
1. With the printer plugged in and powered off, press and hold the Resume/Cancel button,
then press and hold the Power button. (DO NOT release the buttons. The LED light
should be green to indicate that a function is selectable.).
2. While holding the Power button, release the Resume/Cancel button. (DO NOT release
the Power button.).
3. While holding the Power button, press the Resume/Cancel button 2 times, and then
release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel
button is pressed, the LED lights alternately in orange and green, starting with orange.).
4. When the LED light is green, press the Resume/Cancel button 4 times. (Each time the
Resume/Cancel button is pressed, the LED lights alternately in orange and green,
starting with orange.).
5. Press the Power button. The LED lights in green, and the reset is performed. (When the
operation completes, the printer returns to the menu selection mode automatically.).
Note: if you accidentally press the Resume/Cancel button more than 4 times in step 4 then just
press the Resume/Cancel button at least 10 times and the printer will be returned to step 4
automatically
7. Click the button 4 times RESUME, if you want to make another transaction. :
o 1 led- Orange Service test print 1 times Orange Service test print
o 4 led Green Waste ink counter setting 4 time Green Waste ink counter setting
P a g e | 11
2
o 5 led Orange Destination setting (Press Power > Press Resume 3x) 5 times
Orange Destination setting (Press Power> Press Resume 3x)
o 6 led Green Print head deep cleaning 6 times Green Print head deep cleaning
o 14 led Green Left margin correction 14 times Green Left margin correction
Posted in Canon.
3. Connect power.
3. Run GeneralTool.exe
5. Click LOCK RELEASE, and select the applicable model name in SET DESTINATION
6. In CLEAR WASTE INK COUNTER, select MAIN or PLATEN. The selected waste ink
counter will be reset. MAIN resets the main waste ink counter, PLATEN resets the
platen waste ink counter.
If both the main and platen waste ink absorbers are replaced, reset both the main and platen
waste ink counters.
6.7 MiB
114 Downloads
Details...
2.6 MiB
297 Downloads
Details...
P a g e | 22
3
iPTool 1.1.5
iPTool115.rar
Version: 1.1.5
183.6 KiB
5882 Downloads
Details...
Posted in Canon.
How to reset EEPROM buffers Canon PIXMA iP1000, ip1500 with message Waste Ink Full
Error. Service Tool Software for Permanent Reset EEPROM Buffer.
o Connect power.
Remark After service mode Please use software for permanent reset
7.7 MiB
1574 Downloads
Details...
P a g e | 33
4
3.9 MiB
1507 Downloads
Details...
Posted in Canon.
Jul 1stReset Ink Tank Full Error for Canon IP1700, IP1300
3. Keep holding down Power button and let Resume button go.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the Canon Pixma iP1700, iP1300 Printers should turn off, if
not, press the Power button once more.
3. run GeneralTool.exe
4. Select USB Port where the canon ip1300 or canon ip1700 installed.
4.7 MiB
114 Downloads
Details...
Posted in Canon.
P a g e | 44
5
The program version 0.9.2a is designed for service works with the printer Canon iP-series in
Normal mode at the moment are supported : iP1200, iP1300, iP1600, iP1700, iP1800, iP2200,
iP2500. iP1200, iP1300, iP1600, iP1700, iP1800, iP2200, iP2500.
Features:
* Expanded information on the printer ink in the cartridge level, and containers for the waste of
ink.
* Printing test samples for testing nozzles PG.
* Cleaning and deep cleaning PG printer pallet cleansing and cleaning rollers.
* Changing the delay value for drying.
* Changing your printer.
* Reading and dumping EEPROM printer.
* Obnulenie counters level black and coloured ink cartridges.
Clear the counters occupancy core and supplementary containers for the waste of ink.
Ink Level shows the level of occupancy ink: BK . BK black cartridge.
CY colored ink cartridge Cyan. MG colored Magenta ink cartridge. YL Yellow colored ink
cartridge. WM core container for the waste of ink. WP additional container for the waste
of ink. Port Name displays the name of the printer port on the system. Port S / N shows the
serial number of the printer port. Power shows the number of: ON inclusions printer.
< OFF to turn off the printer. Cartridge Info Displays information about: BK black
cartridge. CL a color cartridge. Head Parking displays the number of parking lots
PG. Head Cleaning shows the number of conventional heating PG. Head Deep Cleaning
displays the number of deep cleaning PG. Cartridge Replacement shows the number of
replacements: BK black cartridge. CL colored cartridge.
iPTool
iP-Tool.rar
Version: 0.9.2.a
View post
P a g e | 55
6
183.6 KiB
7791 Downloads
Details...
IPTool 1.1.4
iptoolv114.rar
Version: 1.1.4
183.1 KiB
3541 Downloads
Details...
iPTool 1.1.5
iPTool115.rar
Version: 1.1.5
View post
183.6 KiB
5882 Downloads
Details...
191.5 KiB
4851 Downloads
Detai
Posted in Canon.
The program version 0.8.0a is designed for service works with the printer Canon MP-Series
Low-Level mode at the moment are supported: MP150, MP160, MP170, MP180, MP450,
MP460. MP150, MP160, MP170, MP180, MP450, MP460.
(more)
Posted in Canon.
P a g e | 66
7
o With the printer powered off but connected to a power source, press the Power button
while pressing and holding the Stop/ Reset button.
o When the Power is lit, press the Stop/Reset button two times while pressing and
holding the Power button.
o When releasing the Power button and the Stop / Reset button (regardless of order), the
printer will move into a service mode. (Waiting for menu selection)
o When the on/off lights in green, press the Stop/Reset button the specified number of
time(s) according to the function listed in the table below.(Each time the Stop/Reset
button is pressed, the LED lights alternately in orange and green, starting with
orange.)note: press 4 times for waste ink counter reset.
o Turn off the printer.( it must be turn off) then turn it on again.
Anonymous said Let me just say this I have had many dealings with this printer type.
Ozgur what you need to make sure is that not only are the two little rubber parts are clean but
that the filter(s) are clean as well those little porus plastic parts inside the rubber housing.
When washed these will come up white-ish.
Also make sure that while you have the filters out to clean in and around that area with a
cloth / tissues something to absore excess ink. After you clean this however you still need to
service resert your printer as mentioned above.
P a g e | 77
8
the method for doing so is worded very badly so I will explain my way.
(1) have your printer power down ie. off, just to make sure pull the plug out and wait 10
seconds.
(2) plug printer back in, now Hold down the Stop/Reset button dont let go.
(2a) push and hold the on/off button
-at this point both fingers are holding down the buttons.-
(3) take your finger of Stop/Reset, pause maybe a second now press stop/reset button once
and then press again and hold.
(4) take your finger off on/off and now finally take your finger off stop reset.
wait for the printer to go into its service mode ie. wait maybe 30 secs a min whatever till the
printer carage has moved back into ints original spot.
after this has occoured you should be able to press Stop/reset to cycle though the options
each time you press Stop/Reset Alarm and on/off should alternate lighting up. Hope this helps.
Also google MPtool and downlad that this can reset your ink carts to full again, and can help
with other errors, BUT your printer needs to be in low level mode. Google that I cant find that
at the moment.
P a g e | 88