Professional Documents
Culture Documents
Configuração Huawei Ma5600
Configuração Huawei Ma5600
>>User name:root
>>User password:admin
MCSCTO601>enable
MCSCTO601#config
---------------------------------------
Board Name : H561SCU
Board Status : Active normal
---------------------------------------
MCSCTO601(config)#
System configuration data has been saved completely, no need to save again
Command:
display vlan 184
VLAN ID: 184
VLAN type: standard
VLAN attribute: common
------------------------------
F/S /P Native VLAN State
------------------------------
0/7 /2 1 up
------------------------------
Standard port number: 1
Command:
undo ip route-static 0.0.0.0 0.0.0.0
Command:
ip route-static 0.0.0.0 0.0.0.0 10.192.71.1
MCSCTO601(config-if-vlanif184)#ip adress10.192.71.1
^
% Unknown command, the error locates at '^'
Command:
ip address 10.192.71.19 24
MCSCTO601(config-if-vlanif184)#quit
MCSCTO601(config)#display ip routing-table
{ <cr>|verbose<K>|statistics<K>|protocol<K>|acl<K>|ip-prefix<K>|ip_addr<I><X.X.X
.X> }:
Command:
display ip routing-table
Routing Tables: Public
Destinations : 7 Routes : 7
MCSCTO601(config)#save configuration
MCSCTO601(config)#
This operation will take several minutes, please wait...
Configuration file had been saved successfully
Note: The configuration file will take effect after being activated
MCSCTO601(config)#quit
MCSCTO601#quit
Check whether system data has changed. Please save data before logout. Are you
sure to log out? (y/n)[n]:y
MCSCTO601#